Upload
shahadat-hossain
View
348
Download
9
Embed Size (px)
Citation preview
1
Shahadat HossainShahadat HossainExecutiveExecutive
Quality Assurance DepartmentQuality Assurance Department
1. Making a knitted Panels (Front, back, sleeve)
1. Computerized Knitting Machine (Stoll & Shima)2. Hand Knit Machine (yarn Section)
2. Winding (lubrication) Yarn before knitting3. Dyeing Yarn before knitting4. Inspection5. Washing and Drying6. Linking operation7. Inspection, Pressing8. Packing
2
Sweater Production Process
Hand Knitting (Swatch making for
yarn approval)
3
The yarn before knitting needs to be dyed with
different colour. It can be done either by hank dyeing or cone
dyeing.
4
Hank dyeing
Hank Dyeing
5
Hank Dyeing
6
Different color and dyestuff must be prepared
carefully from the dye lab. Receipt will be formed for dyeing process.
7
Colour Formulationlab dip In SQ Hues
Lab Dip Preparation
8
Cone Dyeing(Package dyeing)
9
Dyed cone
10
Cone dyeing machine(sample machine)
11
One of the important step before panel
making is cone winding & lubrication. The cone winding is to remove dust, dirt or
fault on the yarn before knitting. The lubrication is to reduce the yarn friction
before knitting. It is important the wax should be free of
dust and rotated freely during the winding process.
12
Cone winding & lubrication
13
Cone winding and waxing
Cone Winding & Lubricating
before knitting
14Waxing yarn during winding process
Waxing
Winding process
15
The first step is to make the panel knitting
either by Computer Knitting machine or hand machine.
The decision to make by computer or hand machine is depended on the complexity of the design.
The panel making includes front, back and sleeve , placket.
Sometimes, intarsia design will be done.
16
Panel Making
Panel Knitting Computer Stoll Machine
17
Panel KnittingFully Fashion Knitting
18
First inspection on fabric panel
19Draw thread is removed manually
Knitting Panel AQL
20
Linking is to connect different panels (front, back
and sleeve) together to form a garment. Loop to loop connection is done manually for high
quality garment. For lower quality, a simple sewing can be done.
21
Linking process
Linking
22
Linking
23
Light Check
24
Trimming & Mending
25
After the linking process (front, back and
sleeve are joined together), 2nd fabric inspection will be carried out.
The inspected garment will go to washing and finishing.
This will improve the softness and hand free of the sweater before final inspection and packing.
26
Washing & Drying
Washing & Finishing
27
Tumble Dry Hydro extractor
Washing & Finishing
28
After Wash Light check
29
Garments distribution after wash
30
Sewing
31
FQC Check
32
Ironing
33
Get up Check
34
Hang tag attached
35
Metal Pass
36
Folding
37
Packing
38
Hourly Audit
39
Warehouse Goods keeping
40
Yarn storage
41
Panel making for front, back and sleeve
First inspection and remove draw thread Linking process to make a garment
Second inspection before washing Washing and finishing
Final inspection and pressing Packing for shipment.
42
Summary (1)
Additional processes are needed. Waxing the yarn before knitting Hank dyeing or cone dyeing before knitting. Make decision if the panel is to be knitted
by computer machine. Sample preparation is normally done by
hand machine but here use Computerized machine.
it will be develop gradually when I collect picture from floor.
The end 43
Summary (2)