Servo-i ensamble

SERVO-i Ventilator SystemProduct End-of-Life Disassembly Instructions

SERVO-i Ventilator System Product End-of-Life Disassembly Instructions

2 MTS-07-0007

Important• The SERVO-i Ventilator System is a medical device

used in hospital environments. The unit must beproperly cleaned before disassembling.

Proper cleaning of the unit before Product End-of-Life disassembly must be performed by the formerowner (hospital).

• Special waste. This product containselectronic and electrical components.Discard disposable, replaced and left-over parts in accordance withappropriate industrial and environmentalstandards.

• Recycling. Worn-out batteries must berecycled or disposed of properly inaccordance with appropriate industrialand environmental standards.

Environmental declarationComponents with special environmental concern

Components listed below shall be disposed of inaccordance with appropriate industrial andenvironmental standards.

PC boards (Printed circuit boards)

• PC 1770 Main back-plane

• PC 1771 Control, including Lithium battery

• PC 1772 Monitoring, including Lithium battery

• PC 1775 Plug-and-Play back-plane

• PC 1777 Panel including Backlight Inverter

• PC 1778 DC/DC & Standard connectors

• PC 1780 Pneumatic back-plane

• PC 1781 Pressure transducer, 2 each

• PC 1784 Expiratory channel

• PC 1785 Expiratory channel connector

• PC 1786 Expiratory channel cassette

• PC 1789 Remote alarm connector

Other electronics

• TFT assembly including backlight

• Touch screen (glass)

• O2 cell, containing caustic lime and lead (Pb)

• O2 Sensor, containing PC boards

• Gas module Air, containing multiple PC boards

• Gas module O2, containing multiple PC boards

• AC/DC Converter, containing PC boards

• Expiratory cassette

• Expiratory valve coil

• Safety valve pull magnet

• Battery modules Nickel-Metal Hydride

• Optional function modules

Construction materials

The construction materials used in SERVO-i in % ofthe total weight.

Metal – total 77%

• Aluminium 69%

• Steel, zink, brass 8%

Polymeric material – total 9%

• PA (Polyamide)

• POM (Polyoxymethylene)

• SI (Silicone)

• TPE (Thermoplastic elastomer)

• PUR (Polyurethane)

• ABS (Acrylicnitrilebutadienstyrene)

• EPDM (Ethylenepropylenedienemonomer)

• PTFE (Polytetrafluoroethylene)

• FPM (Fluororubber)

• NBR (Nitrilerubber)

• PP (Polypropylene)

• PVC (Polyvinyl chloride)

• PS (Polystyrene)

Electronics – total 14%

• Battery modules Nickel-Metal Hydride

• Printed circuit boards, cables etc.

Others – very small amounts

• Filter paper of fibre glass

Product End-of-Life Disassembly Instructions SERVO-i Ventilator System

MTS-07-0007 3

To open:1. Disconnect cable.

2. Remove six screws and separate the unit.

�

� Other electronicsPC board

Glass

PC board

�


4 MTS-07-0007

Other electronics

Nickel-MetalHydride battery


MTS-07-0007 5

Other electronics

To open:1. Pull off filter.

2. Remove four screws.

3. Lift off cover.

�

�

�

�

�

�

PC board

PC board

PC board

Lithium batteryon PC boards {


6 MTS-07-0007

PC boardPC board

Otherelectronics

PC board

Otherelectronics

PC board


MTS-07-0007 7

PC board

Other electronics

Sealed unit,containscaustic limeand lead

Otherelectronics

PC board

Otherelectronics

Otherelectronics

Maquet Critical Care ABSE-171 95 Solna, SwedenPhone: +46 8 730 73 00www.maquet.com/criticalcare

For local contact:Please visit our websitewww.maquet.com

GETINGE GROUP is a leading global provider of equipment and systems that contribute to quality enhancement and cost efficiency within healthcare and life sciences. Equipment, services and tech-nologies are supplied under the brands ARJO for patient hygiene, patient handling and wound care. GETINGE for infection control and prevention within healthcare and life science and MAQUET for Surgical Workplaces, Cardiopulmonary and Critical Care.

© M

aque

t C

ritic

al C

are

AB

, 20

07.

All

right

s re

serv

ed.

MA

QU

ET

rese

rves

the

rig

ht t

o m

odify

the

des

ign

and

sp

ecifi

catio

ns c

onta

ined

her

ein

with

out

prio

r no

tice.

Doc

umen

t N

o.:

MTS

-07-

0007

. A

pril

200

7. P

rice

grou

p:1.

Prin

ted

in S

wed

en.

Education

Servo-i ensamble