Upload
sumon-datta
View
308
Download
2
Tags:
Embed Size (px)
Citation preview
WELCOME TO THE PRESENTATION ON
“A PROJECT ON WASTE
GENERATION AND MANAGEMENT IN
BSCIC AREA, MYMENSINGH”
PRESENTED BY –DPERATMENT OF FARM STRUCTURE AND ENVIRONMENTAL ENGINEERING,
BANGLADESH AGRICULTURAL UNIVERSITY
SUPERVISOR OF THE PROJECT:Associate Professor Md. Siddikur RahmanDepartment of Farm Structure and Environmental Engineering,Faculty of Agricultural Engineering & Technology,Bangladesh Agricultural University, Mymensingh – 2202.Email: [email protected]
PROJECT BODY:Sumon DattaShowrav Islam Abir ID No. – 1005035 ID No. - 1005009
REG No. – 36674 REG No. - 36648
INTRODUCTION
INTRODUCTIONWastes may be defined as any substance which constitute a scrap material or other unwanted surplus substance arising from the application of any process. – EPA, 1990
Wastes may be of 3 types:
1. Solid Wastes
2. Liquid Wastes
3. Gaseous Wastes
INTRODUCTIONSolid Wastes consist of polythene, paper, steel, aluminum, copper, cardboard materials, sludge etc.
Liquid wastes consist of slurry, biomedical wastes, urine, human wastes, sewage water, toxic wastes etc.
Gaseous wastes consist of airborne emissions and effluents that may contain particulate matter, fumes, smoke, vapor etc. releasing from industries.
INTRODUCTIONBSCIC elaborates as Bangladesh Small & Cottage Industries Corporation.
BSCIC was established in 1957.
Its sole purpose is to promote the development of small, medium and cottage industries (SMICs) in the manufacturing sector through the provision of advisory services, fiscal and financial assistance, market facilities.
INTRODUCTIONBSCIC, Mymensingh was established on 1st September, 1968 in Maskanda, central Mymensingh.
It had an area of 10.81 acres.
It currently occupies 9.69 acres consisting of 51 industries of different types.
INTRODUCTION
Following table will demonstrate the types and corresponding numbers of industries:
Types of Industry NumbersMustered Oil Mill 14
Coconut Oil Mill 2
Mosquito Coil Mill 2
Bicycle Parts Manufacturing 2
Puffed Rice Mill 2
Fried Rice (Muri) Mill 3
Electrical Wire Manufacturing 4
Biscuit Mill 3
Wheat Products (Flour, Noodles) 4
Material Processing ( Plastic, etc ) 4
Marble Manufacturing Mill 1
INTRODUCTION
Rest:
Types of Industry NumberCotton Mill 1
Pulse Crushing 1
Pesticide and Fertilizer Producing 1
Mat Producing Mill 1
Soap Producing Mill 1
Packaging Mill 1
Spices Producing Mill 1
Printing Mill 1
Dress Producing Mill 1
Fruit Processing Mill 1
Miscellaneous Parts Manufacturing Mill
1
OBJECTIVES
OBJECTIVES To assess the types and amount of wastes that is
generated in the study area. To determine the relationship between waste
generation and other variables. To assess the present waste management practices in
the study area. To assess the environment impact of the generated
wastes. To develop a guideline for the betterment of waste
disposal as well as management system for the study area.
METHODOLOGY
METHODOLOGYThe survey and work plan will be implemented according to following steps:
1. Study Area:
Maskanda, Mymensingh
METHODOLOGY
2. Design of Study:The steps in the study are: First of all, the study areas are selected. The important variables, directly related to the
objective of the study, are determined. Method of obtaining data is designed. Required study will be collected. The collected data will be analyzed and reported.
METHODOLOGY
3. Industries Selected for Surveying:Ms. H.K. Traders
Ms. Maloti Enterprise
Ms. Heicame Bangladesh
Ms. Bismillah Enterprise
Ms. Habib Food Products
Ms. Rahman Plastic Industries
Ms. M.K. Mat Industry
Ms. Rajabaria Chemical Industries
Ms. Next Line Production
Ms. Tricom Foods Ltd.
Ms. Sun-moon Food Industries
Ms. Brahmaputro Printing & Packaging
Ms. Sayma Overseas Co. Ltd.
Ms. Dong Zing Chemical Complex Ltd.
Ms. Super Cables Industries
Ms. Sakoa Enterprise
Ms. Aroti Group of Industries
Ms. Shelly Enterprise
METHODOLOGY
3. Industries Selected for Surveying:Ms. Super Cables Industries
Ms. M. K. Mat Industries
Ms. Mita Garments
Ms. Ruhul Enterprise
Ms. Baba Loknath Enterprise(1)
Ms. Hasib Oil Mill
Ms. Golden Biscuit Factory
Ms. Kiron Food Products
Ms. B. S. Food Industries
Ms. Old Bombay Marble Factory
METHODOLOGY
3. Industries Selected for Surveying:Ms. Pakiza Electric
Ms. Brishti Biscuit Factory
Ms. T.K. Food Industries
Ms. Laxmi Industries
Ms. Brishti Flour Mill
Ms. Matri Industries
Ms. Matri Enterprise
Ms. Kiron Food Industries
Ms. Nur Chira Muri Mill
Ms. Forazi Food Industries
Ms. Ruhul Amin Enterprise (2)
Ms. Super Cables
Ms. Baba Loknath Enterprise(2)
Ms. A. S. Food Industries
Ms. Mia Oil Mill
Ms. Monisha Enterprise
Ms. P.L. Oil Mill
Ms. P.L. Coconut Oil Mill
Ms. Rupon Oil Mill
Ms. R. S. Enterprise
Ms. Laxmi Enterprise
METHODOLOGY
4. Study Period:Although some irrelevant information was collected prior to study, the main information for the study will be conducted from July 2013 to October 2013.
5. Instruments for Data Collection:An Interview schedule will be used in order to collect relevant information from the different industries.
The schedule is carefully designed keeping the objectives of the study in view.
For easy communication, the schedule is made in both Bengali/English form.
METHODOLOGY
6. Collection of Data:Collection of data will be done through direct contact with industry representative on relevant industry site.
Manager and other stuffs will be interviewed for obtaining information regarding the product of the industry, waste generation.
Its management practices and pollution due to the waste.
In order to minimize the error in responses, questions will be asked in Bengali for easy access.
A Sample of Questionnaire is shown in next slide.
METHODOLOGYQUESTIONNAIRE FOR OBTAINING INFORMATION ON WASTE
GENERATION AND MANAGEMENT IN BSCIC INDUSTRIAL AREA, MYMENSINGH
BANGLADESH AGRICULTURAL UNIVERSITY
FACULTY OF AGRICULTURAL ENGINEERING AND TECHNOLOGY
DEPARTMENT OF FARM STRUCTURE AND ENVIRONMENTAL ENGINEERING
Date: ____ / ____ / ________Serial No. –
Objective: To collect firsthand information on waste generation and management.
Name of Industry: ________________________________________________________
Address: __________________________________________________________________
Name of Information Provider/ Representing Officer:
_____________________________________________________________________________
Date of Establishment: _________________
METHODOLOGYType of Industry: ____________________________________
Size of Industry: ______________________________________ (In local unit)
: ______________________________________ (In Hectares)
Number of Employees: _______________________________ (In Total)
Production Quantity: _____________________
Waste Generated in the Industry:
1. Types of Wastes: __________________________________________________________________________________________________________________________________________________________
2. Waste Generation:
_____________________________________________________________________________
Presence of Treatment Plant: _________ (Yes/No)
METHODOLOGYWaste Management System:
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Chemicals Used:
__________________________________________________________________________________________________________________________________________________________
Waste Disposal System:
____________________________________________________________ (In Dry Season)
_________________________________________________________ (In Winter Season)
METHODOLOGYThis is the methodology for conducting the project and results and discussion will be provided after the collection and proper analysis of data after study period.
CONCLUSIONTHANKS TO ALL RESPECTED TEACHERS AND AUDIENCE
FOR ATTENDING THE PRESENTATION ON PROJECT.