38
TABLE OF CONTENTS Page How to Use this Module ................................................................................... i Introduction .................................................................................................... ii Technical Terms ..............................................................................................iv Learning Outcome 1 Create Presentations .................................................... 1 Learning Experiences/Activities ....................................................... 2 Information Sheet 1.1 ...................................................................... 4 Self-Check 1.1 ................................................................................. 5 Answer Key ……………………………………………………………………….6 Activity Sheet 1.1 ............................................................................. 7 Checklist 1.1 .................................................................................. 8 Information Sheet 1.2 ...................................................................... 9 Operation Sheet 1.2 ....................................................................... 10 Checklist 1.2 ................................................................................. 12 Activity Sheet 1.2 ........................................................................... 13 Checklist 1.3 ................................................................................. 14 Learning Outcome 2 Customize Basic Settings .......................................... 15 Learning Experiences/Activities ..................................................... 16 Information Sheet 2.1 .................................................................... 17 Self-Check 2.1 ............................................................................... 20 Answer Key ……………………………………………………………………...21 Operation Sheet 2.1 ....................................................................... 22 Checklist 2.1 ................................................................................ 25 Activity Sheet 2.1 ........................................................................... 26 Checklist 2.2 ................................................................................ 27 Learning Outcome 3 Format Presentation ................................................... 28 Learning Experiences/Activities ..................................................... 29 Information Sheet 3.1 .................................................................... 30 Self-Check 3.1 ............................................................................... 34 Answer Key ………………………………………………………………………35 Operation Sheet 3.1 ....................................................................... 36 Checklist 3.1 ................................................................................ 39 Activity Sheet 3.1 ........................................................................... 40 Checklist 3.2 ................................................................................. 41 Learning Outcome 4 Add Slide Show Effects ............................................... 42 Learning Experiences/Activities ..................................................... 43 Information Sheet 4.1 .................................................................... 44 Self-Check 4.1 ............................................................................... 47 Answer Key ………………………………………………………………………48 Operation Sheet 4.1 ....................................................................... 49 Checklist 4.1 ................................................................................ 53 Activity Sheet 4.1 ........................................................................... 54 Checklist 4.2 ................................................................................. 55

PPT

Embed Size (px)

DESCRIPTION

for grade 9

Citation preview

Page 1: PPT

TABLE OF CONTENTS

Page How to Use this Module ................................................................................... i Introduction .................................................................................................... ii

Technical Terms .............................................................................................. iv

Learning Outcome 1 – Create Presentations .................................................... 1

Learning Experiences/Activities ....................................................... 2

Information Sheet 1.1 ...................................................................... 4

Self-Check 1.1 ................................................................................. 5

Answer Key ……………………………………………………………………….6

Activity Sheet 1.1 ............................................................................. 7

Checklist 1.1 .................................................................................. 8

Information Sheet 1.2 ...................................................................... 9

Operation Sheet 1.2 ....................................................................... 10

Checklist 1.2 ................................................................................. 12

Activity Sheet 1.2 ........................................................................... 13

Checklist 1.3 ................................................................................. 14

Learning Outcome 2 – Customize Basic Settings .......................................... 15

Learning Experiences/Activities ..................................................... 16

Information Sheet 2.1 .................................................................... 17

Self-Check 2.1 ............................................................................... 20

Answer Key ……………………………………………………………………...21

Operation Sheet 2.1 ....................................................................... 22

Checklist 2.1 ................................................................................ 25

Activity Sheet 2.1 ........................................................................... 26

Checklist 2.2 ................................................................................ 27

Learning Outcome 3 – Format Presentation ................................................... 28

Learning Experiences/Activities ..................................................... 29

Information Sheet 3.1 .................................................................... 30

Self-Check 3.1 ............................................................................... 34

Answer Key ………………………………………………………………………35

Operation Sheet 3.1 ....................................................................... 36

Checklist 3.1 ................................................................................ 39

Activity Sheet 3.1 ........................................................................... 40

Checklist 3.2 ................................................................................. 41

Learning Outcome 4 – Add Slide Show Effects ............................................... 42

Learning Experiences/Activities ..................................................... 43

Information Sheet 4.1 .................................................................... 44

Self-Check 4.1 ............................................................................... 47

Answer Key ………………………………………………………………………48

Operation Sheet 4.1 ....................................................................... 49

Checklist 4.1 ................................................................................ 53

Activity Sheet 4.1 ........................................................................... 54

Checklist 4.2 ................................................................................. 55

Page 2: PPT

Learning Outcome 5 – Print Presentation and Notes ...................................... 56

Learning Experiences/Activities ..................................................... 57

Information Sheet 5.1 .................................................................... 58

Self-Check 5.1 ............................................................................... 61

Answer Key ………………………………………………………………………62

Operation Sheet 5.1 ....................................................................... 63

Checklist 5.1 ................................................................................. 64

Activity Sheet 5.1 ........................................................................... 65

Checklist 5.2..……………………………………………………………………66

Page 3: PPT

Date OPERATING A PRESENTATION PACKAGE

Page #

Version No. 01 i

HOW TO USE THIS MODULE

Welcome to the Module PC Operations. This module contains training materials and activities for you to complete.

The unit of competency Operate a Presentation Package

contains the knowledge, skills and attitudes required for a PC

OPERATIONS (NC) Level II.

You are required to go through a series of learning activities in

order to complete each of the learning outcomes of the module. Most learning outcome has Information Sheets, Job Sheets, Operation

Sheets and Activity Sheets. Follow these activities on your own and

answer the Self-Check at the end of each learning activity.

If you have questions, don’t hesitate to ask your teacher for assistance.

Recognition of Prior Learning (RPL)

You have already some basic knowledge and skills covered in this module because you have been working for some time; and already completed training in this area.

If you can demonstrate competence to your teacher in a

particular skill, talk to your teacher so you don’t have to undergo the same training again. If you have a qualification or Certificate of Competency from previous trainings show it to him/her. If the skills

you acquired are consistent with and relevant to this module, they become part of the evidence. You can present these for RPL. If you are not sure about your competence skills, discuss this with your teacher.

After completing this module, ask your teacher to assess your

competence. Result of your assessment will be recorded in your competency profile. All the learning activities are designed for you to complete at your own pace.

In this module, you will find the activities for you to complete

and relevant information sheets for each learning outcome. Each learning outcome may have more than one learning activity.

Page 4: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 2

Program/Course: PC OPERATIONS NC II

Unit of Competency: OPERATE A PRESENTATION PACKAGE

Module Title: Operating a Presentation Package

INTRODUCTION:

This module contains information and suggested learning activities on PC OPERATIONS NC II. It includes instructions and

procedure on how Operate a Presentation Package.

Completion of this module will help you better understand the succeeding module on Creating Presentations, customizing basic settings, formatting Presentation, adding slideshow effects and print

presentation and notes.

This module consists of five (5) learning outcomes. Each learning outcome contains learning activities supported by instruction sheets. Before you perform the instructions, read the information

sheets and answer the self-check and activities provided to ascertain to yourself and your peer/teacher that you have acquired the knowledge necessary to perform the skill portion of the particular

learning outcome.

Upon completing this module, report to your instructor for assessment to check your achievement of knowledge and skills requirements of this module. If you pass the assessment, you will be

given a certificate of completion.

SUMMARY OF LEARNING OUTCOMES:

Upon completion of the module, the students should be able to:

LO 1. Create Presentations

LO 2. Customize Basic Settings

LO 3. Format Presentation

LO 4. Add Slideshow Effects

LO 5. Print Presentation and Notes

Page 5: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 3

ASSESSMENT CRITERIA:

LO 1. Create Presentations

1. A simple design is created according to organizational requirements.

2. Text and symbols are added to a blank presentation.

3. Presentation templates and slides are used to create a presentation.

4. Various formatting tools are used to improve the look of

the presentation. 5. Presentations are saved in correct folder.

LO 2. Customize Basic Settings

1. Display is adjusted to meet user requirements. 2. Different toolbars are opened and viewed to select options.

3. Font settings are appropriate for the purpose of the presentation.

4. Appropriate slide layout, color schemes, background and

design templates are selected. LO 3. Format Presentation

1. Charts, graphs, bulleted lists are used and modified as

required. 2. Objects are inserted/imported and manipulated to meet

presentation requirements.

3. Slide layouts are modified including text and colors to meet presentation requirements.

4. Formatting tools are used as required.

5. Slides are added, deleted, duplicated and rearranged to suit presentation needs.

6. Presentation is closed and saved to disk and/or in another format.

LO 4. Add Slide Show Effects

1. Animation and multimedia effects are incorporated into presentation to enhance the presentation.

2. Slide transition effects are added to ensure smooth

progression through the presentation. 3. Presentation is tested for correct sequence and overall

impact.

4. Onscreen navigation tools are used to start and stop slide show or move between different slides.

Page 6: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 4

LO 5. Print Presentation and Notes

1. Appropriate print format is selected.

2. Preferred slide orientation and various notes, handouts and color options are selected before printing.

3. Slides are previewed and contents are spell checked.

4. Selected slides, notes and handouts are printed and submitted to appropriate person for feedback.

PREREQUISITES

None

Page 7: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 5

TECHNICAL TERMS

Terminology Description

Title bar The toolbar that displays the name of the document and

the program you are working with

Menu bar Displays the menus with all the commands and groups

needed in making a presentation

Toolbars Contains commands that are frequently used for ease

access

Window Displays the contents of the active cell.

Presentation

window

Toggles (switches back and forth) between and among types

of views of the presentation that you are working on

Task pane Lists the names of the menus in presentation.

Maximize button Sets the screen to its optimum size

Status bar Displays the address of the active slide or slide number

and the number of slides in a presentation

Slide pane Is a small pop-up box on the left side of the screen that

displays the preview of all the slides created

Notes pane Used to insert a guide in speaking/comments and

explanations about a word or words in a slide

Minimize button Reduces the screen size to a program icon in the task bar

Close button Used to turn off/exit the application window

Page 8: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 6

INFORMATION SHEET 1.1

EXPLORING THE POWERPOINT WINDOW

On the Presentation software, you can create overhead slides,

speaker notes, audience handouts, and outlines—all in a single presentation file. PowerPoint offers powerful tools to help you create and organize a step by step presentation. In this lesson, you will learn

how to get started with PowerPoint, explore the PowerPoint window, and choose a method on how to start a presentation, create a

presentation using the AutoContent Wizard as well as save your work. When the PowerPoint opens, it displays the program window.

As with any Microsoft Windows XP program, you can adjust the size of the PowerPoint and presentation windows with the Minimize and Restore Down/Maximize buttons, and you can close PowerPoint or the

presentation window with the Close button.

At the right side of the PowerPoint window is the task pane.

Task panes let you work with commands without having to display menus or use toolbar buttons. Some task panes display automatically. You can quickly switch from one task pane to another by clicking the

Other Task Panes down arrow on any task pane to display the other task panes. When you’ve with a task pane, click the Close button to

hide it.

Slide

Menu

bar Toolbar

Outline/Slides

Pane

Notes

Pane

Slide view

tab

Status bar

Type a

Question

Box

Other

Task

pane

Task

pane

Page 9: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 7

ACTIVITY SHEET 1.1

EXPLORING THE POWERPOINT WINDOW Directions: Do the following procedure as directed.

1. On the taskbar, click Start and the Start menu appears.

2. On the Start menu, point to All Programs and the Programs menu appear displaying all the programs on your hard disk drive

including Microsoft Office where MS PowerPoint is located.

3. Move your mouse pointer over MS PowerPoint and click it to open the PowerPoint presentation window.

4. Point to the Insert Chart button on the Standard toolbar for a few seconds. A ScreenTip appears displaying the words Insert Chart.

5. Click on the New Slide button on the Formatting toolbar to add another slide. Notice the change that happened to the Task bar

when you click it.

6. Choose Title, Text and Clip Art Slide Layout.

7. Type your name to the Click to add text portion of the slide.

8. Click Slide show from current slide on the Slide view tab.

9. Press Esc key when done.

NOTE: Use Observation Checklist no. 1 EXPLORING PRESENTATION

WINDOW to assess the performed task.

Page 10: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 8

Creating and Saving Presentation

The New Presentation task pane can help you work with existing

presentations as well as create new ones. If you have already created a presentation, you will find its name listed in the Open a presentation section of the task pane. If you want to create a new presentation,

you can simply start adding text to the blank presentation in the Slide pane or use the options in the New section of the task pane.

Three methods to start a new Presentation:

Click Blank Presentation to start a new presentation from scratch.

Click From Design Template/installed templates to apply one of PowerPoint’s design templates to a new, blank presentation.

Click From AutoContent Wizard/installed themes to let PowerPoint help you with both presentation content and a

design.

The work you have accomplished so far is stored only in your

computer’s temporary memory. To save your work for further use, you

must give the presentation a name and store it on your computer’s hard disk drive or any removable storage devices. The first time you

save a new presentation, the Save As dialog box opens when you choose the Save command. In the Save As dialog box, you can type

the name of the presentation and choose where to save it. Once you name a presentation, you can save changes you made by clicking the Save button on the Standard toolbar or by selecting Save on the File

menu. In other words, the newer version overwrites the original version. If you want to keep both the original file and the edited

version, you can choose the Save As command on the File menu to save the edited version with another file name.

Page 11: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 9

OPERATION SHEET 1.2

CREATING AND SAVING A PRESENTATION

Objective: In this activity, you start Microsoft PowerPoint from a Blank Presentation.

Procedure:

1. On the Windows taskbar, click the Start button, point to All Programs/Microsoft Office, and click Microsoft PowerPoint. PowerPoint opens a blank slide ready for you to use.

2. Click on the Click to add title and type MY FIRST PRESENTATION as the title of your sample presentation.

3. Click on the Click to add subtitle to type your name for your sample presentation.

4. Click Insert/New Slide (Ctrl+M) or click the New Slide button on the toolbar to add a new slide.

5. Click on the Click to add title and type MY FIRST DAY IN SCHOOL

as the title of the second slide. 6. Click on the Click to add text to type a short paragraph on your

first day in school as the content (you can use texts and symbols) of

the second slide. 7. Repeat steps 4 to 6 when adding a new slide to continue.

8. On the menu bar, click File/New and click the New From Design template on the Task pane.

Page 12: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 10

9. Select a desired design from the Apply a design template on the taskbar and repeat steps 2 to 7.

10. On the menu bar, click File/New and click the New From AutoContent wizard.. on the Task pane.

11. Click Next to start the wizard and select a presentation type

then click the Next button. 12. Click Next to select the On-screen presentation then click Next

again to go to the Presentation options and type the presentation title MY FIRST DAY IN SCHOOL then click Finish.

13. Save the presentations to the correct folder.

Page 13: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 11

INFORMATION SHEET 2.1

Customizing Basic Settings

After opening the Presentation window, you can customize the basic settings in order to help the user easily use the different toolbars, font settings, and different slide format for creating a slide

presentation that is appropriate for the given task.

When you start a PowerPoint presentation, the Menu bar appears on the next row with the Title bar to save window space and only the most frequently used commands appear on the quick access

toolbar. Remember that the toolbars on your computer might display

buttons different from the ones shown in the figures in this lesson that is why you have to familiarize yourself with the different versions

of Microsoft PowerPoint. To display the rest of the commands on either toolbar, right click the Menu bar where you will see 3 options

which help you add commonly used command buttons to the quick access toolbar.

The moment you use a button on the Toolbar Options list, it replaces a less frequently used button on the visible part of the

toolbar.

The PowerPoint uses personalized menus and toolbars. When

you click a menu name, a short menu appears. This short menu contains the most commonly used commands. To make the full long

menu appear, you may leave the pointer over the menu name for several seconds, you may double-click the menu name, or you may click the menu name and then click the small double arrow at the

bottom of the short menu.

Page 14: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 12

You can use different font styles, font size, font type, and font effects necessary for your desired presentation in order to enhance the

appearance of the slides. In order to do this, click on the Home menu or tab/Font Group to change the settings.

To further enhance the look of your presentation, you can

change the format of your slides to fit the layout that is appropriate to the type of presentation of your choice. Furthermore, you can also change the slide designs and background to make the slides appealing

to your audience. In this way, you will sustain the interest of your audience. All of these enhancements can be found in the Home menu.

PowerPoint comes with two special slides which is the Slide

Master and the Title Master. Thus, it is possible to create more than

one Slide Master or Title Master within a presentation. This is useful in creating separate sections within the same presentation. To create

several masters within a presentation, you can insert a new Slide Master and Title Master in a presentation or you can apply more than one template to your presentation.

Page 15: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 13

The Slide Master controls the properties of each slide in the presentation. All the qualities of the Slide Master (background color,

text color, font, and font size) appear on every slide in the presentation. Changing the appearance of the Slide Master affects every slide in a presentation. For example, you may want to include a

logo or other artwork or even the date on every slide. You may do this by simply placing it on the Slide Master. This is helpful for the Slide Master contains master placeholders for title text, paragraph text,

date and time, footer information, and slide numbers. The master title and text placeholders manage the text format for every slide in a

presentation; therefore, if you want to make changes throughout your presentation, you should change each slide master or pair of masters.

Page 16: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 14

OPERATION SHEET 2.1 Title: CUSTOMIZE BASIC SETTINGS

Objective: In this activity, you will customize the basic settings in a PowerPoint presentation window display.

Procedure:

1. Click the Start button on your Windows taskbar, point to All

Programs and locate Microsoft PowerPoint, then open an activity entitled MY FIRST DAY IN SCHOOL.

2. Click Tools/Customize on the menu bar to open the Customize

dialog box and tick the box for Show Standard and Formatting toolbars on two rows under the Option tab.

Page 17: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 15

3. Select a desired view for your presentation by clicking the Outline view or Slide view tab on the Slide pane of the

presentation window.

4. Select a slide sub-title then click Format/Font on the menu

bar to open the Font dialog box and make the desired font adjustments.

5. Click the Format menu and change the Slide Design,

Background, and Slide Layout of your presentation.

Slide

Pane

Page 18: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 16

6. Select Master/Slide Master under the View menu to insert a logo to appear on all slides.

7. Click File/Save As and save it on your folder as CUSTOMIZED

SETTINGS.

Page 19: PPT

Date LO 2. CUSTOMIZE BASIC SETTINGS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 17

ACTIVITY SHEET 2.1

LO 2. Customize Basic Settings

Directions: Do the following procedure as directed.

1. Open Microsoft PowerPoint by clicking Start/All

Programs/Microsoft Office from the Taskbar.

2. On the Title Slide, type FIGURES OF SPEECH and then type

your Full Name in the subtitle.

3. Select Master/Slide Master on the View menu to insert date in

the Date Area and the Slide Title in the Footer Area.

4. Insert other slides and continue typing the contents of your

presentation.

5. Select the appropriate Layout for each slide.

6. Select a desired Design and modify the necessary Background

color.

7. Make necessary enhancements for the Font type, style, size,

and effects.

8. Save the presentation as REPORT in your folder.

Page 20: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 18

INFORMATION SHEET 3.1

Formatting a Presentation and Saving in Different Format

In order to help you communicate your message in a variety of

ways, you can include different types of data:

1. Text, 2. Images,

3. Graphics 4. numerical information

into your PowerPoint presentation. The most direct way of doing this

is to copy and paste information such as texts, objects, and slides within a presentation, among presentations, and into other

application programs.

Another way of inserting information into a PowerPoint presentation is to use commands on the Insert menu. These

commands allow you to insert

1. clip art, 2. picture, 3. photo album 4. smart art, 5. chart, 6. shapes, When inserting clip art, tables, and other information to your

PowerPoint presentation, you normally need to revise the slide layout. If you modify the layout of a slide but then decide that you

rather use the original slide layout, you can reapply it by using the Slide Layout command. You may also do this by changing the current

slide layout or by selecting a new layout from the Layout command in Home menu.

PowerPoint enables you to insert other graphics, scan photographs, art, photos or objects from a CD-ROM or other removable media into a slide. Using the Picture command on the

Insert menu, you may specify the source of the picture, as in From File or Disks.

Page 21: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 19

To add pictures from file on your hard drive, removable disks, or a network, you may use the From File command on the Picture submenu. On the other hand, you may also add a picture from the

clip art collection that comes with PowerPoint by selecting the Clip Art command, which opens the Insert ClipArt task pane where you can

search for clip arts. You can scan and insert a picture using the From Scanner or Camera command if you have a scanner connected to the computer you are using. The moment you insert clip arts or

any graphics into your document, you can modify them by using the Picture toolbar.

You can improve the images by clicking the brightness, contrast, and other options. Then after making changes, you can click the Reset Picture button on the Picture toolbar to reverse all the

changes you’ve made. Occasionally, you need only a portion of a picture in the presentation. Using the Crop button on the Picture toolbar, you can mask portions of a picture that you don’t want to

show on the screen. Furthermore, you can also select a picture to rotate by positioning the pointer (which changes to the Free Rotate

pointer) over the green rotate lever on top of the object, and then drag in order to rotate the object to any angle.

A table organizes information accurately into rows and columns. You can construct a table with standard-sized cells, or draw a custom

table with various-sized cells. After you create a table, you can enter text into the cells as you would in a paragraph except when you are using the Tab key because this moves the insertion point from cell to

cell instead of indenting the text. The first row in the table is usually used for column headings and the leftmost column is ideal for row labels. You can change and format individual cells as well as the

entire table. You can merge or combine cells to form one long cell to accommodate the texts that you enter in the table. This is useful if

you wish to spread the text across the top of a table. You can also split a cell into two and you can add color, add borders, and change

Page 22: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 20

text alignment in a table by using the Formatting, and the Tables and Borders toolbars.

PowerPoint makes the process of inserting an Excel chart into a

presentation easier by embedding the chart as an object in the slide.

An embedded object is an object that maintains a direct connection to its original program, known as the source program. After inserting

an embedded object, you can simply do editions by double-clicking it. By doing so will open the program in which it was originally created.

To further give your presentation an enhanced appearance, you can also insert fancy or stylized text into it using WordArt. WordArt allows you to insert visual enhancements to your text that go beyond

changing a font or font size. Majority of the users apply WordArt to give emphasis to short phrases or to a single word. You can insert

stylized text by simply clicking the Insert WordArt button on the Drawing toolbar or click the Insert/Picture/WordArt on the menu bar and then selecting a style.

Page 23: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 21

There are times where you have to save your presentation in different format in order to meet the users need. By using the File/Save As menu gives you the options to save it as

1. a PowerPoint Presentation file (ppt) = where you can open and edit your presentation in MS-PowerPoint,

2. a PowerPoint Show file (pps)= where you can open your

presentation in slideshow mode. 3. Or ppt of lower version,

In addition, you can also save your presentation as :

1. A webpage or package to CD in order to open it in a computer with Windows 98 2nd Edition or later even without

MS-PowerPoint installed on it.

Page 24: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 22

OPERATION SHEET 3.1

FORMATTING A PRESENTATION AND SAVING IN DIFFERENT

FORMAT Objective: In this activity, you will customize the basic settings in a

PowerPoint presentation window display.

Procedure: 1. Open your presentation entitled REPORT. 2. Click Slide Design on the Format menu to open the Slide

Design task pane.

3. Under the Apply a design template, select a desired design for your presentation.

4. On the Format menu, click Background to open the Background dialog box.

5. Click the Background fill drop down arrow and click Fill

Effects.

6. On the Gradient tab of the Fill Effects dialog box, tick the Two Colors option and select desired colors.

Page 25: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 23

7. Tick on the Shading styles option, select a desired variant and click OK.

8. Click Apply on the Background dialog box if you want to apply the fill effect to the current slide or Apply to All if you want to

apply the fill effect to all slides. 9. Select the Title placeholder on the first slide and click the Font

color drop down arrow on the Formatting toolbar or Drawing

toolbar to change the color to a desired color (as in yellow).

10. Select the second slide and click Insert/Picture/Clip Art to

open the Clip Art task pane.

11. Click Organize clips to open the Microsoft Clip Organizer and click the plus (+) sign on Office Collections to expand the picture

category and select an appropriate picture for the slide.

12. Select the picture to show the Picture toolbar (right-click the

picture and click Show Picture toolbar if it is not shown). 13. Adjust the contrast, brightness and color of the picture to suit

your needs. (You can crop the picture as needed).

14. Select another slide(s) to insert another picture, object, or table as in step #10.

15. Select the last slide and click the New Slide icon on the

Formatting toolbar and select a blank layout.

Title Placeholder

Page 26: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 24

16. Click the Insert WordArt icon on the Drawing toolbar to open the WordArt Gallery.

17. Select a WordArt style and click OK.

18. Type END OF SHOW and click OK. 19. Point the tip of the mouse pointer on the corner edge of the

WordArt to turn into a double arrow then click and drag the selection to resize the object.

20. Click Save As under the File menu to open the Save As dialog box.

21. In the Save in box, select the folder where you want to save

the presentation then click the File name box and type FORMATTED REPORT.

22. Click the drop-down arrow on the Save as type box to select

PowerPoint Show then click Save.

Page 27: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 25

INFORMATION SHEET 4.1

Adding Slide Show Effects

Animation plays a major part in a presentation in the sense that

it enhances a simple story to create a visual impression. Animations are the effects that you call when an object move within a slide. It is normally used to add focus on important points thereby creating

interest to your presentation. The most exciting part is when you can animate text, graphics, diagrams, charts, and other objects on your

slides. Animations are of three kinds: subtle, moderate, and

exciting. In saying this, there are two ways of animating objects. One is by means of animation scheme and another is by means of custom animation. Animation scheme gives you one-click access to

professionally designed animations while Custom animation is applying a personalized animation for each object or texts. Custom

animation on the other hand, gives full control of the slide show. Moreover, different effects can be adjusted for the slides. Aside from these, transition effects help your presentation make more enhanced

by varying the way one slide replaces another. It is a visual effect of slides as it moves on and off the screen during a slide show. You can

set a transition for a slide or group of slides by selecting the slides in Slide Sorter view or in Normal view. You can also set the time between slides, the direction of transition, and when the transition

will take place.

To apply Animation Scheme to a presentation, follow the

following procedure:

1. While on the normal view, click to select the slide(s) where you want to apply animation.

2. Click Slide Show on the menu bar, then click animation

scheme.

Animation

Scheme

Page 28: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 26

3. Choose and click the animation you want to apply.

Click Play button if you want to preview how the animation work.

Click Slide Show button to watch a full screen preview with the animation you choose in effect.

To apply the animation scheme to all slides, click Apply to all Slide button.

To apply Custom Animation, the steps are:

1. From the normal view, select the placeholder where the effect

will be applied.

2. From the Slide Show menu, click on Custom Animation.

Page 29: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 27

3. In the Custom Animation, click Add Effect and do one or more of the following:

Point to Entrance then click the effect desired for the text or object.

Point to Emphasis then clicks an effect desired for the text or an object.

Point to Exit then click an effect desired for the text or an object that makes it leave the slides at some point

and disappear.

Point to Motion Paths to add a motion path for the

animation.

To apply Slide Transition, follow these steps:

1. From the Normal view or Slide Sorter view, select a slide.

2. From the Slide Show menu, click Slide Transition to open the Slide Transition task pane and its options.

3. Select a transition from the selections under Apply to selected slides.

4. Click the Slide Show button to preview the transition effect of

the slide. 5. Press Esc key to end the slide show.

6. Under the Modify transition, click the Speed down arrow to select a slower effect. You can also click the Sound down arrow to insert a sound for the current slide.

7. Click the Slide Show button again to preview the slide transition and press Esc key to end the show.

Page 30: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 28

OPERATION SHEET 4.1

ADDING SLIDE SHOW EFFECTS

Objective: In this activity, you will add slide show effects in a

PowerPoint presentation.

Procedure:

1. Open your PowerPoint presentation activity entitled ATOMS.

2. Click Slide Transition under the Slide Show menu to open the Slide Transition task pane.

3. Under Apply to selected slides, select a desired transition

effects for the slide(s).

4. Click the Speed drop-down arrow under Modify transition then click the Sounds drop-down arrow if you want to add sound for the slide.

5. Click another slide to do the same step if you want to create different effects or you can click Apply to All Slides.

Page 31: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 29

6. Select the Title placeholder then click Custom Animation under the Slide Show menu to open the Custom Animation

task pane.

7. Under the Custom Animation task pane, click Add

Effect/Entrance/More Effects to open the Add Entrance

Effect tool box.

8. Select an animation effect from Basic, Subtle, Moderate, and

Exciting type and make sure that the Preview Effect box is

checked to see the effect then click OK to apply. 9. Click the Start drop-down arrow to select how the effects appear

on the slides.

Page 32: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 30

10.Click Slide Show to preview the presentation. 11.Repeat steps 6 – 9 for animating other texts and objects.

12.Click Insert/Movies and Sounds/Sound from File to locate sound file from your computer or removable media.

13.Select Action Buttons from the Slide Show menu to choose an action button.

14.Click and drag somewhere on the slide to draw the button. The Action Settings dialog will appear.

Page 33: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 31

15.Click the Hyperlink to drop-down arrow and select slide. The Hyperlink to Slide dialog box will appear.

16.Select Slide 3 and click OK. Click OK again to apply the action

settings. 17.Click Slide Show to test the action button. 18.Repeat Steps 13 – 17 to apply it to other slides.

19.Click Set Up Show under the Slide Show menu to open the Set Up Show dialog box.

20.Click Browsed at a kiosk under Show type then click OK.

Page 34: PPT

Date LO 4. ADD SLIDE SHOW EFFECTS Page #

Version No. 01 OPERATING A PRESENTATION PACKAGE 32

Page 35: PPT

INFORMATION SHEET 5.1

Print Presentation and Notes

In PowerPoint, you can print your presentation in several ways: as slides, speaker notes, audience handouts, or an outline. PowerPoint detects the type of

printer that you chose either color or black and white. It prints the appropriate version of the presentation. If you decide on using a black and white printer, your presentation will be set to print in grayscale.

Based on the settings in the Print dialog box, PowerPoint prints slides and

supplements. You can set the print range to define which slides to print. You can select to print multiple copies of a presentation, and you can choose to collate the presentation as you print if you want to print more than one copy of

each slide. When you decide to collate the presentation, PowerPoint prints a complete copy before printing the next copy. You can also have the option to Preview any changes you made by selecting the Preview button in the Print

dialog box.

Setting Print Options: 1. On the File menu, click Page Setup. A dialog box appears as

shown.

2. In the Slide sized for list box, click the options you want.

3. If you click Custom, enter the measurements you want in the width and height boxes.

4. Click the Print Preview button to see what your slides will look

like when printed. 5. On the Print Preview toolbar, click Print. A dialog box appears

as shown.

Page 36: PPT

PARTS OF THE PRINT DIALOG BOX

1. Printer – allows you to choose the printer installed in your computer. 2. Print Range – is used to specify the specific slides or range to be printed. 3. Print what – allows choosing what to be printed such as: Slides, Hand-

outs, or Outline. 4. Color Gray Scale – allows to choose from colored or black and white print

out. 5. Preview – views what the output will be when printed. 6. Scale to Fit Paper – is used to decrease the size of the slide.

7. Print Comments and ink markup– is used to print any comments that you’ve inserted throughout the presentation.

8. Frame Slides – is used to print a border around each slide.

9. Print Hidden Slides –prints hidden slides. 10. Collate – collates (1,2,3, 1,2,3) each printed copy instead of printing all

the copies of each page at once (1,1, 2,2, 3,3…) 11. Copies –sets the number of copies to be printed. 12. Print to file – is used to send the output to a file rather than to your

printer.

ADDING AND PRINTING NOTES

Notes are very vital because they help you to remember what to say about

each slide when you deliver a presentation. Notes are like cue cards that you use when you deliver a speech. They also remind you to tell a joke, make eye contact and include any key points that you want to make. Notes don’t appear

in the slide presentation itself, but they can be printed so that you can use them whenever you deliver a presentation.

Here are the procedures in adding Notes to your slides:

Page 37: PPT

1. If you are not in the Normal view, click View on the menu bar, and then click Normal.

2. Select the slides for which you want to add a note. 3. Click, then type the note that you need.

4. Click the Print Preview button to view the notes when printed. PREPARING HANDOUTS AND NOTES FOR PRINTING

Handouts are the miniature pictures of your slides. In order to prepare

them, a layout should be made first. The Handout Master can be used to view

and select the handout layouts.

Procedure in Using the Handout Master

1. Open a saved presentation.

2. From any slide, choose View/Master/Handout Master to open the master as shown in the figure below.

Page 38: PPT

OPERATION SHEET 5.1

PRINT PRESENTATION AND NOTES

Objective: In this activity, you will add slide show effects in a PowerPoint

presentation.

Procedure:

1. Open a saved PowerPoint activity from your folder.

2. Click Print from the File menu to open the Print dialog box. 3. Click Properties to select the paper size and orientation then click OK.

4. Click Print what option to select the type of presentation to print. 5. Click the Color option, if needed to change the color. 6. Set the number of copies to print.

7. Click OK to continue printing the presentation.