Wiring a DC MotorFOR LESSON 14FROM WWW.LEARNCSE.COM

Step 1: Insert wires and capacitor

IMPORTANT:Do not solder yetNotice RED wire on right, BLACK on leftThe capacitor has no polarity

Step 2: Solder and trim

Take care not to melt plasticTrim capacitor leads and excess

wire

Step 3: Route wires under motor bracket

Take care not to bend the metal tabs on the motor

Step 4: Secure wires with square knot

Tie the knot close to the nylon motor bracket. The idea is to protect the motor terminals.

Step 5: Twist the red and black wires

Verify motor terminals by wiggling the red and black wires. The solder terminals on the motor should not move.