Upload
uttam-trasadiya
View
193
Download
0
Embed Size (px)
Citation preview
G H PATEL COLLEGE OF ENGINEERING & TECHNOLOGY
Active Learning AssignmentSubject: 2131906– kinematics of machine
IIIrd Semester, Academic Year 2015-16Batch: 2C19
By:-Uttam TrasadiyaMechanical engineeringGcet college Vvnagar.
Characteristics of involute and cycloidal gear ,Interference and undercutting ,Center distance variation ,Minimum number of
teeth ,Contact ratio.
-: CONTENTS :-
EME653 Experiment on Gears tooth profile, interference etc.mp4
involute gears animation..mp4
Number of teeth
The numbers NP {z1} and NG{z2} represent the number of teeth on the ’pinion’ and ’gear’ respectively. As a default the data of the pinion is input in the left column, the data of the gear in the right column.For spur gears you need a minimum number of 17 teeth to avoid undercut without any profile shift. You can achive a smaller number of teeth with an appropriate profile shift factor or using helical gears.
Contact Ratio
𝐴𝑟𝑐𝑜𝑓 𝑐𝑜𝑛𝑡𝑎𝑐𝑡𝑐𝑖𝑟𝑐𝑢𝑙𝑎𝑟 h𝑝𝑖𝑡𝑐 =
𝐶𝐷𝐶𝑜𝑠 𝜃∗ 𝑃
---: Thank You :---