Item No: 6 of 40 What would be the appropriate result of a Stress test at its peak?

a. A gradual performance slow-down leading to a non-catastrophic system halt

b. A gradual performance improvement leading to a catastrophic system halt

c. A gradual performance slow-down leading to a catastrophic system halt

d. A gradual performance improvement to a non-catastrophic system halt

Item No: 7 of 40 The cursory examination of all the basic components of a software system to ensure that they work is called:

a. Fuzz testing

b. Black-box testing

c. Sanity testing

d. Smoke testing

Item No: 8 of 40 Which of the following statements about Equivalence partitioning is correct?

a. A software testing design technique in which tests are designed to include representatives of boundary values

b. A type of software testing used for testing two or more modules or functions together with the intent of finding interface defects between the modules or functions

c. It is the degree to which the source code of a program has been tested

d. A software testing technique that divides the input data of a software unit into partitions of data from which test cases can be derived

Item No: 9 of 40

Consider the following code fragment:

        If(a>b) && (b<c)        {                b= (a+c)/2;        }

In the options given below, each of the three numbers in parentheses represents the inputs for a test case, where the first, second and third number represents a, b, c respectively of the code fragment. Keeping this in mind, find out which of the following options gives a set of test case inputs that achieves decision coverage for this fragment of code in the minimum number of test cases?

a. (5, 3, 2)

b. (5, 3, 2); (5, 4, 0)

c. (5, 4, 0); (4, 5, 0)

d. (4, 5, 0); (5, 4, 5)

Item No: 10 of 40Which of the following is not a part of System testing?

a. Recovery testing and failover testing

b. Performance, Load and Stress testing

c. Usability testing

d. Top-down integration testing

Item No: 11 of 40 Which of the following testing occurs outside the development environment?

a. Installation testing

b. White-box testing

c. Module testing

d. Fuzz testing

Item No: 12 of 40 Question:

What do you understand by the term "Monkey test"?

a. It is random testing performed by automated testing tools

b. It is used to simulate the actions a user might perform

c. It is another name for Monitor testing

Item No: 13 of 40 Which of the following options correctly defines the term "test harness"?

a. It is a high level document describing the principles, approach and major objectives of the organization regarding testing

b. It is a set of test activities collected into a manageable phase of a project

c. It is a collection of software and test data configured to test a program unit by running it under varying conditions and monitoring its behavior and outputs

d. It is a set of several test cases for a component or a system under test

The testing phase in which individual software modules are combined and tested as a group is called:

a. Unit testing

b. Integration testing

c. Module testing

d. White-box testing

Item No: 15 of 40 What is the name of the testing method in which (for each pair of input parameters) all the possible discrete combinations of parameters are passed on?

a. Single testing

b. Pairwise testing

c. Unit testing

d. None of the above

Item No: 16 of 40

Which of the following statements is incorrect in relation to Code coverage?

a. It describes the degree to which the source code of a program has been tested

b. It is a form of White-box testing

c. It is a form of Black-box testing

Item No: 17 of 40 Performance testing is used for real-time systems only.

a. True

b. False

Item No: 18 of 40 Which of the following types of errors are uncovered in White-box testing?

a. Performance errors

b. Logical errors

c. Typographical errors

d. Behavioral errors

Item No: 19 of 40 ___________ testing is used to evaluate and understand the application's reliability, scalability and interoperability when more users are added or the volume of data is increased.

a. Integration

b. Performance

c. Regression

d. Stability

Item No: 20 of 40 Choose the correct description of a Stub in software testing:

a. A Stub is basically the same as a driver except that it is very fast in returning results

b. A Stub is a dummy procedure, module or unit that stands in for an unfinished portion of a system

c. A Stub is just a different name for an Emulator

d. None of the above

Item No: 21 of 40 Which of the following types of testing emulates the real world use of a system and verifies that the product fulfills the intended requirements?

a. System testing

b. Model testing

c. Integration testing

d. User acceptance testing

Item No: 22 of 40 The process of using a test case to test a specific unit of code, function, or capability is called:

a. Test Run

b. Test Script

c. Test Plan

d. Test Scenario

Item No: 23 of 40 The review of a technical document such as requirements specs or a test plan, with the purpose of looking for problems and seeing what is missing, without fixing anything is called:

a. Inspection

b. Black box testing

c. White box testing

d. Walkthrough

Item No: 24 of 40 In which of the following testing methodologies does the test case generation use the system model?

a. Repetitive testing

b. Model testing

c. Modular testing

d. System testing

Item No: 25 of 40 Identify the defect which can be detected by Equivalence Partitioning Technique:

a. Improper handling of sequences of events

b. Mis-handling of combinations of conditions

c. Irregular handling of large and small values

d. Improper handling of input classes

e. Invalid output generation

Item No: 26 of 40 Which of the following strategies are used for Integration testing?

a. Big Bang

b. Top-down

c. Bottom-up

d. Any of the above strategies can be used

Item No: 27 of 40 Identification of set-use pairs is accomplished during which of the following static analysis activities?

a. Control flow analysis

b. Data flow analysis

c. Coding standards analysis

d. Function Point Analysis

Item No: 28 of 40 In which type of testing is random data generated for input into the software?

a. Smoke testing

b. Marge testing

c. Fuzz testing

d. Operation testing

Item No: 29 of 40 Which of the following types of testing is likely to benefit the most from the use of test tools that provide the test capture and replay facilities?

a. Integration testing

b. Regression testing

c. System testing

d. User acceptance testing

Item No: 30 of 40 Which of the following Security testing concepts deals with the process of determining whether a requester is allowed to receive a service or perform an operation?

a. Confidentiality

b. Integrity

c. Authentication

d. Authorization

Item No: 31 of 40 Which of the following test activities provides the maximum potential cost savings from the use of Computer-Aided Software Testing (CAST)?

a. Test execution

b. Test planning

c. Test management

d. Test design

Item No: 32 of 40 Which of the following is not included in Non-functional testing?

a. Load/Stress testing

b. Unit testing

c. Security testing

d. Stress testing

Item No: 33 of 40 Which one of the following is a major benefit of verification early in the software development life cycle?

a. It allows the identification of changes in user requirements

b. It facilitates timely set up of the test environment

c. It reduces defect multiplication

d. It allows testers to become involved early in the project

Item No: 34 of 40

Which of the following tools supports traceability, recording of incidents, and scheduling of tests?

a. Static analysis tool

b. Debugging tool

c. Test management tool

d. Configuration management tool

Report an issue with this question

Item No: 35 of 40 Time Remaining: 0:29:26

Question:

From the following options, choose the best example which represents a reliability failure for an application:

a. Slow response time

b. Excessive application consumption

c. Random application termination

d. Failure to encrypt data

Report an issue with this question

Item No: 36 of 40 Time Remaining: 0:29:16

Question:

Which of the following is true about Sanity Testing?

a. A Sanity test is used to determine if a small section of the application is still working after a minor change

b. A Sanity test is run to check if the build of an application is stable and it can be considered for further testing

c. A Sanity test is the process of testing to make sure that the older programming still works with the new changes

d. All of the above are true

Report an issue with this questionItem No: 37 of 40

Time Remaining: 0:29:02 Question:

From the options given below which of the dynamic program analysis technique is aimed at improving application performance?

a. Code complexity analysis

b. Profiling

c. Network packet sniffing

d. Spelling and grammar checking

e. Program slicing

Report an issue with this questionItem No: 38 of 40

Time Remaining: 0:28:49 Question:

What is Boundary value testing?

a. It tests values at and near the minimum and maximum allowed values for a particular input or output

b. It tests different combinations of input circumstances

c. It is a testing technique associated with White-box testing

d. Both a and b

Report an issue with this question

Item No: 39 of 40 Time Remaining: 0:28:38

Question:

What is the difference between Regression testing and Retesting?

a. Retesting is done by programmers while Regression testing is done by testers

b. Retesting checks for unexpected side-effects while Regression testing ensures that the original fault has been corrected

c. Retesting ensures that the original fault has been corrected while Regression testing checks for other unexpected side-effects

d. There is no difference between Regression testing and Retesting

Report an issue with this questionItem No: 40 of 40

Time Remaining: 0:28:25 Question:

Which of the following models of software development incorporates testing into the whole software development life cycle?

a. Agile model

b. Waterfall model

c. V-Model

d. Spiral model