Circulator pump

Parts and materials

1.Top Screw:Brass2.O-ring:NBR3.Nameplate:Plastic4.Motor housing:Aluminium5.Screw:Stainless steel6.Stator7.Stator jacket:Nylon8.O-ring:NBR9.Rotor Can:SST10.Bearing:Ceramic11.Rotor:Brass12.Rotor shaft:Ceramic13.Back plate:SST14.Gasket:NBR15.Impeller:PP16.Inlet ring:SST17.Pump body:Cast iron18.Capacitor19.Terminal box:Nylon20.Screw:Stainless steel21.Cable grip:Nylon22.Terminal box:Nylon

Exploded view

Parts

Pump body

-cast iron: good pressure resistance (maximum working pressure: 6 bar)- inlet ring in the middle made of stainless steel

Impeller

-polypropylene (PP)-using metal component to connect the impeller with the ceramic rotor shaft (clamp connection)

Back plate

-stainless steel-ceramic bearing in the middle: high hardness, high temperature resistance

Rotor

-brass: alloy of copper and zink

Rotor can

-Stainless steel-Closes the part of the pump where water can be ( the water can’t reach the electrical part of the pump)

Stator

Terminal box

-nylon-capacitor (smoothing the output of the power supplies)

Power range system