Embed Size (px)
Citation preview
Making Education OPEN and FUN!
Building a Toy CarFun Do LabsTM2
fun2dolabs.org
Requirements - 1
Cell 9vChasis Tyres
Fun Do Labs2
Cell 9vGeared Motor Dummy WheelSwitch
Fun Do Labs2
Requirements - 2
ChasisChasis is a frame which is used to connect the internal parts
like motor, tyres etc.
Fun Do Labs2
TyresTyres are used for moving the car
Fun Do Labs2
BatteryBattery is used to power the circuit
Fun Do Labs2
SwitchSwitch is used for making and breaking flow of current in circuits
Fun Do Labs2
Geared MotorGeared motor is used for moving the tyres
Fun Do Labs2
Dummy MotorDummy motor can be attached to tyres
Fun Do Labs2
Fun Do Labs2
Step - 1Attach dummy motors in chasis
Step - 2Attach geared motors in chasis
Fun Do Labs2
Step - 3Insert screw in geared motor hole
Fun Do Labs2
Step - 4Tighten the screws with nuts
Fun Do Labs2
Step - 5Attach tyres to shafts of geared motors
Fun Do Labs2
Step - 6Attach tyres to shafts of dummy motors
Fun Do Labs2
Step - 7Fix battery & switch using double tape or some adhesive
Fun Do Labs2
Step - 8Attach left motor grey wire with right motor white wireAttach left motor white wire with right motor grey wire
(Refer to connection diagram)Fun Do Labs2
Step - 9Attach one of the switch wire to any wire of the motor
(Refer to connection diagram)
Fun Do Labs2
Step - 10Switch on/o� to control the car
Fun Do Labs2
Battery
-+
SwitchMotor1
Motor2
Connection Diagram
