ENGINECF6-80C2

By Ccoyure Tito

CF6-80C2

HIGH BYPASS RATIO, DUAL ROTOR, TURBOFAN ENGINE

INTRODUCTION - POWER PLANT GENERAL

GENERAL COMPONENT LOCATIONS

(P61)

PURPOSELOCATIONCHARACTERISTICSREMOVAL & INSTALLATION

CAUTION: DURING REMOVAL & INSTALLATION, DO NOT LEAVE TOOLS OR OTHER

OBJECTS IN AIR INLET

CAUTION: ADJUST SLING TO TAKE ONLY

WEIGHT OF INLET COWL

INLET COWL

PURPOSELOCATIONCHARACTERISTICSOPERATIONS & LIMITATIONS REMOVAL & INSTALLATION

WARNING: ENSURE THAT HOLD- OPEN ROD IS FULLY EXTENDED AND LOCKED. RED BAND & “UNLOCKED”

CAUTION: DO NOT ALLOW FAN COWL PANEL TO SLAM CLOSED

FAN COWL PANELS

WARNING: ADEQUATELY SUPPORT FAN COWL

PANEL DURING HANDLING. WEIGH

APROX. 50 KG EACH

CAUTION: RAISING OR LOWERING AFTER REMOVAL MAY DAMAGE UPPER COWL SEAL. LIFT PANEL OUTWARD

FROM STRUT HINGE

FAN COWL REMOVAL AND INSTALATION

ADJUSTMENTTEST- Force req. to close latches

CAUTION: DO NOT USE OVER 100 POUNDS (445

N) FORCE TO PUSH LATCH HANDLE CLOSED.

CAUTION: DO NOT ROTATE KEEPER EYEBOLT TO ADJUST LATCH TENSIONGAP: .06 A 0.18”

FAN COWL PANEL LATCH ADJUSTMENT

FAN COWL CHINE

THRUST REVERSER

THRUST REVERSER TENSION LATCHES

CLOSING FORCE: 0.5 A 2.5”

THRUST REVERSER TENSION LATCH ADJUSTMENT

THRUST REVERSER LATCH ASSEMBLY

RELIEF VALVE: 4350 – 4500 PSIG

THRUST REVERSER OPENING ACTUATOR

THRUST REVERSER OPENING / CLOSING

CORE COWL PANELS

CORE CORE PANEL WEIGH APROX 41 KG

CORE COWL REMOVAL & INSTALLATION

CORE COWL PANEL LATCH ADJUSTMENT

TURBINE EXHAUST SLEEVE AND PLUG

ENGINE MOUNTS

FORWARD AND AFT ENGINE MOUNTS

ENGINE VENTS AND DRAINS

DRAIN MAST AND MODULE

POWER PLANT HAZARD AREAS

ENGINE ENTRY CORRIDOR

ENGINE NOISE HAZARD AREA