A9-005
Wireline Accessories
Aluminum 70 ft Articulated Mastfor Slickline and Wireline
ProfileProfileThe KOLLER Aluminum Articulated Mast has been designed to support slickline and wireline well intervention.
The support of rig up, rig down and operational forces are the main purpose of the mast. One main and two auxiliary winches assist the operator by lifting pressure control equipment.
The slickline wire or the wireline cable can be taken by the mast top sheave, by a separate top sheave lifted by one auxiliary winch or by a top sheave mounted on top of the PCE. The lightweight alumi-num design allows helicopter transports and low capacity crane lifts. A hydraulic rig up and rig down of the mast makes the mast operation easy for the crew.
• Aluminum lattice mast design• DNVGL-ST-0378 certificate for “Standard for offshore
and platform lifting appliances” (former DNV 2.22)• DNVGL-ST-E273 certificate for “Portable offshore
units” (former DNV 2.7-3; Class R30 for 3 m wave height)
• 6,500 lbs / 3.000 kg hydraulic main winch (with dual line block; 2,800 lbs / 1.300 kg single line lift)
• 1,100 lbs / 500 kg hydraulic auxiliary winch (with dual line block; 550 lbs / 250 kg single line lift)
• 220 lbs / 100 kg manual auxiliary winch• Hydraulic controls• Hydraulic supply by separate power pack or by KOLLER
winch power pack• Foldable outriggers for mast support
Options• Machinery Directive 2006/42/CE declaration of
conformity• ATEx 2014/34/EU, Zone I declaration of conformity• 45 ft and 90 ft mast heights• Hydraulic second auxiliary winch• Jacking wheels
Wireline Units &Accessories
Well Servicing Products
Transport position
T: +49 5141 9898-0 F: +49 5141 9898-98Bruchkampweg 5 29227 Celle/[email protected] www.koller-celle.com scan with your smartphone
Operation dimensionsLength incl. outriggers 6,700 mm / 21.98 ftWidth incl. outriggers 5,100 mm / 16.73 ftHeight 21,900 mm / 79.50 ftHeight PCE 19,800 mm / 65.00 ft
(from ground to hook incl. 1,000 mm / 3.28 ft lift)
Max. mast reach 1,020 mm / 3.90 ft (from mast base structure to PCE center line)
Hydraulic supply requiredPressure 210 bar / 3,000 psiFlow rate 40 l/min / 10.5 USGal/min
SpecificationsMax. Slickline / Wireline pull 2,700 kg / 6,000 lbsSafe total mast load 5,450 kg / 12,000 lbsHydr. main winch capacity single line pull dual line pull
1,300 kg / 2,800 lbs 2,950 kg / 6,500 lbs
Hydr. auxiliary winch capacity single line pull dual line pull
250 kg / 550 lbs
500 kg / 1,100 lbsManual auxiliary winch capacity 100 kg / 220 lbsMax. wind speeds guyed not guyed rig up / down
60 mph / 27 m/s / 96 km/h / 52 Knots 30 mph / 13 m/s / 47 km/h / 39 Knots 25 mph / 11 m/s / 40 km/h / 21 Knots
Temperature range -20 / 50°C / -4 / 122°F
Transport dimensionsLength 7,800 mm / 25.60 ftWidth 1,530 mm / 5.00 ftHeight 1,940 mm / 1.94 ftWeight without auxiliary equipment with auxiliary equipment (sheaves, guy wires, etc.)
1,500 kg / 3,300 lbs 1,620 kg / 3,570 lbs
Aluminum 70 ft Articulated Mast for Slickline and Wireline
A9-005 Rev.01