8/2/2019 Wireless Led (2)
1/19
Anuj tomar
0902731018
Ec 3rd year
8/2/2019 Wireless Led (2)
2/19
Introduction of wireless led
Led
Wireless led
Working
Application
AdvantageDisadvantage
conclusion
8/2/2019 Wireless Led (2)
3/19
Wireless telecommunications is the transfer ofinformation betweentwo or more points thatare not physically
connected. Distances can be short,
such as a few meters fortelevision remotecontrol, or as far as
thousands or evenmillions of kilometersfor deep-space radiocommunications.
8/2/2019 Wireless Led (2)
4/19
Wireless led is work on the principal ofinduction.
They can transmit the message signal without
the use of wires so they are called WIRELESSLED.
They used the fm modulation for modulationof audio frequency signal.
They are mainly avaliable in red colour.
8/2/2019 Wireless Led (2)
5/19
8/2/2019 Wireless Led (2)
6/19
A light-emittingdiode (LED) isa semiconductor light source.
LEDs are used as indicatorlamps in many devices andare increasingly used forother lighting.
Introduced as a practicalelectronic component in1962, early LEDs emittedlow-intensity red light, butmodern versions are
available across thevisible, ultraviolet,and infrared wavelengths,with very high brightness.
8/2/2019 Wireless Led (2)
7/19
important characteristic is that they aresemiconductor devices capable of fast switchingwith the addition of appropriate electronics.
LEDs can be used as communication devices fortransmitting and broadcasting audio and digitalinformation.
Hence, they can become part of wireless optical
communication systems. This article describes an information system for the
broadcasting of audio and digital signals usingvisible LEDs.
8/2/2019 Wireless Led (2)
8/19
STAGE 1 STAGE 2
8/2/2019 Wireless Led (2)
9/19
Serialcommunicationinterface
receiver
Serial
commincation
8/2/2019 Wireless Led (2)
10/19
8/2/2019 Wireless Led (2)
11/19
As a traffic light controller
It is used in moving message display
boards Wireless led can be used as
communication device in
transmitting and broadcasting audioinformation
It is also used in meseum and
8/2/2019 Wireless Led (2)
12/19
Due to its low power consumption andmaintenance led are being exchanged withincandescent lights in us and other countries.
It consumes only 15-20w power in compare toincandescent light 150w ,which become very costlywhen used in array of traffic lights.
These led,s are used for transmitting the message
,that can be announced until the next signal ischange.
These led are used for broadcasting the local trafficinformation to both pedestrains and local users.
8/2/2019 Wireless Led (2)
13/19
8/2/2019 Wireless Led (2)
14/19
8/2/2019 Wireless Led (2)
15/19
The superiority of wireless light emittingdiodes (LEDs) over incandescent lights, due tolong life expectancy, high tolerance to
humidity, low power consumption, andminimal heat generation, is well supported.
No need of wire in wireless led.
To control the traffic signals.
Transfer the information, signal easily from oneplace to another place.
8/2/2019 Wireless Led (2)
16/19
High setup cost
Necessity of strong network.
They are only used for short distancecommunicatoin.
Maintenance of wireless is not easy.
LED performance largely depends on the ambienttemperature of the operating environment.
LEDs must be supplied with the voltage above thethreshold and a current below the rating. This caninvolve series resistors or current-regulated powersupplies.
8/2/2019 Wireless Led (2)
17/19
High-brightness LEDs are getting morepopular and are opening up a number of newapplications, especially with improved
efficiency and new colors. Wireless led based on the fast switching of
LEDs and the modulation of visible light isdeveloped into a new kind of information
system.
It can be used as an information beacon forshort-distance communication.
8/2/2019 Wireless Led (2)
18/19
8/2/2019 Wireless Led (2)
19/19