Wide range, versatile and flexible
to cover all applications.
ROX-400 ROX-600 ROX-800
ROX-1100 ROX-2000
Mist Eliminators at the best …Engineered to overcome many of the short falls of other technologies and designs. The design minimizes the reliance on filters, provides exceptional fluid drainage, suitable for high mist applications, exceptional air quality, low maintenance and low life-cycle cost. Mist eliminators that will contribute to the bottom line… After all, an unclean plant is an expensive plant, to company & employees. Contaminated air causes health problems, absenteeism, increased equipment & facility maintenance, all translates to production and profit losses. Mist eliminators that exceeds plant air quality by broad margins… Don’t be mislead by efficiency claims, it is easy to be 99% efficient by removing large droplets, yet exhaust air remains above today’s air quality demands. Exhaust mist measurement is what matters. Clean air…typically less than 0.020 mg/m3, recommended plant limit 0.5mg/m3. Let our sales experts show you. AEROEX Advantages • Removes mist, smoke and bacteria. • 90 – 95% of mist separated without filters. • Unique permanent 2nd stage oil droplet agglomerator filter. • Life cycle greater than 10 years, 1st & 2nd separation stages. • Fluid readily drains to reduce evaporation and odors. • Low life cycle costs. • Machine mount, central systems & ducted exhaust.
Leading edge technology for metalworking emissions solutions
Engineered to overcome the shortfalls of other designs
1st and 2nd stages… revolutionary separation
technique !
• High separationefficiency
• Long Life cycle >10 years
• Cross-flow design
The innovative 1st stage mechanical elements separates 90 – 95% of the mist and solids. The fluid drains out of the air flow, reducing evaporation and odors. No other product is this effective and uses no consumables.
The 2nd stage oil droplet agglomerator is an unique depth filter, layers of stainless steel wire mesh weaved with oil attracting fibers. Efficiency is high as the air travels through a bed of coarse and fine fibers at low velocity. Channels between each layer provide exceptional fluid drainage. Optional is an On-Line Cleaning System for flushing out congealed coolant concentrate and fine solids. Alternatively, the media can be cleaned in place with coolant or water hose. On most applications, cleaning is only every 2 – 5 years. The media is very durable, it even looks bullet proof, lasting 10 – 15 years on most applications. Must select coolant filter or oil filter.
The 3rd stage filter is a policing filter to capture sub-micron mist, smoke and bacteria. A selection of filter options are available from 90% ASHRAE (MERV 14) to HEPA 99.97% @ 0.3 microns. Our HEPA 95% @ 0.3 microns is made exclusively for oil mist with heavy duty microglass media. No other product holds as much oil or lasts as long. Typical life is 2 – 4 years.
Cross Flow Filter Design of 1st & 2nd stages provides optimum separation and oil drainage. In up-flow mist collectors, the oil must drip directly into the air flow and even onto the filter below. This can greatly reduce air flow and filter life
Model cfm hp Voltage Dimensions (inches) Weight (lbs) Inlet (inches) ROX-400 400 0.75 115/220/460/575 26/34 x 21 x 36 ht 210 6 ROX-600 600 0.75 115/220/460/575 26/34 x 21 x 36 ht 210 6 ROX-800 800 1.5 230/460/575 39 x 25 x 38 ht 330 8 ROX-1100 1100 1.5 230/460/575 39 x 25 x 38 ht 330 8 ROX-2000 2000 3 230/460/575 58 x 26 x 52 ht 450 10
Distributed by:
AEROEX Technologies Inc. 17 Hamilton RoadBarrie, ON, Canada, L4N 8Y6 Tel: 705-734-0549 Fax: 705-734-1013
Sales Office Tel: 905-655-7295 Email: [email protected]
www.aeroex.com
ROX-400 Mist Eliminator
AEROEX Technologies Inc. 17 Hamilton RoadBarrie, ON, Canada, L4N 8Y6 Tel: 705-734-0549 Fax: 705-734-1013
Sales Tel: 905-655-7295 e:mail: [email protected] www.aeroex.com
Our smallest but big on ability! Suitable for small to medium machine tools up to 125 ft³ enclosures. Ideal for high pressure coolant.
The innovative 1st stage mechanical elements separates up to 95% of the mist.
The 2nd stage agglomerator is very unique, manufacture in layers of stainless steel wire mesh weaved with oil attracting fibers. Efficiency is high as the air travels though a bed of coarse and fine fibers at a low velocity. Channels between each layer provide exceptional fluid drainage. Optional is a On-Line Cleaning system for flushing out congealed coolant concentrate and fine solids. Alternatively, the media can be cleaned in placed with coolant or water hose. On most applications, cleaning is only every 2 - 5 years. The 2nd stage media is very durable, lasting 10 - 15 years. Must select coolant or oil filter.
The 3rd stage polishing filter or HEPA filter captures sub-micron mist, smoke and bacteria. Typical life is 2 – 4 years. Choose your filter and air quality, see filter options in specifications below. The HEPA filter is made with exclusive heavy duty filter media, no other product holds as much oil or lasts as long.
Specifications: Air flow Filter pressure Filter options (3rd stage)
ROX-400-1 ROX-400-2 ROX-400-3
Motor rating Voltage (amps)
Speed Temperature (max) Weight Length Width Height Inlet connection Sound level Clean air measurement
300 – 420 cfm 0 – 3.5” wg
1 x 4” - MERV 14 (low – medium mist) 2 x 4” – MERV 14 (low - high mist) 12” HEPA 95% @ 0.3microns (all mist & smoke) 0.75 hp 115/230/1/60 (13.8/6.9) 230/460/3/60 (3.2/1.6) 575/3/60 (1.2) 3450 rpm 160°F / 70°F 210 lbs (a) 26” (b) 30” (c) 34” 21” 33” 6” / 152 mm 70 dB(A) < 0.020 mg/m³
Optional: 2nd stage coolant filter 2nd stage oil filter On-Line Cleaning System
Accessories: Installation kit Suction hose Machine adaptor for hose Chip strainer
Motor starter panel VFD motor starter Floor mount stand Wall mount bracket
3rd stage filter options One 4” filter makes compact dimensions for mounting on small machines. Two 4” filters will provide HEPA quality air. 12” HEPA filter for the best quality air.
ROX-600 Mist Eliminator
AEROEX Technologies Inc. 17 Hamilton Road Barrie, ON, Canada, L4N 8Y6 Tel: 705-734-0549 Fax: 705-734-1013
Sales Tel: 905-655-7295 e:mail: [email protected] www.aeroex.com
Small but big on ability! Suitable for small to medium machine tools up to 175 ft³ enclosures. Ideal for high pressure coolant.
The innovative 1st stage mechanical elements separates up to 95% of the mist.
The 2nd stage agglomerator filter is very unique, manufacture in layers of stainless steel wire mesh weaved with oil attracting fibers. Efficiency is high as the air travels though a bed of coarse and fine fibers at a low velocity. Channels between each layer provide exceptional fluid drainage. Optional is a On-Line Cleaning system for flushing out congealed coolant concentrate and fine solids. Alternatively, the media can be cleaned in placed with coolant or water hose. On most applications, cleaning is only every 2 - 5 years. The 2nd stage media is very durable, lasting 10 - 15 years. Must select coolant or oil filter.
The 3rd stage polishing filter or HEPA filter captures sub-micron mist, smoke and bacteria. Typical life is 2 – 4 years. Choose your filter and air quality, see filter options in specifications below. The HEPA is made with exclusive heavy duty filter media, no other product holds as much oil or lasts as long.
Specifications: Air flow Filter pressure (3rdstage) Filter options (3rd stage)
ROX-600-1 ROX-600-2 ROX-600-3
Motor rating Voltage (amps)
Speed Temperature (max) Weight Length Width Height Inlet connection Sound level Clean air measurement
475 – 640 cfm 0 – 3.5” wg
1 x 4” – MERV 14 (low - medium mist) 2 x 4” – MERV 14 (low - high mist) 12” HEPA 95% @ 0.3 microns (all mist & smoke) 0.75 hp 115/230/1/60 (13.8/6.9) 230/460/3/60 (3.2/1.6) 575/3/60 (1.2) 3450 rpm 160°F / 70°F 210 lbs (a) 26” (b) 30 (c) 34” 21” 33” 6” 70 dB(A) < 0.025 mg/m³ (HEPA)
Optional: 2nd stage coolant filter 2nd stage oil filter On-Line Cleaning System
Accessories: Installation kit Suction hose Machine adaptor for hose Chip strainer
Motor starter panel VFD motor starter Floor mount stand Wall mount bracket
3rd stage filter options One 4” filter makes compact dimensions for mounting on small machines. Two 4” filters will provide HEPA quality air. 12” HEPA filter for best quality air.
ROX-800 Mist Eliminator
AEROEX Technologies Inc. 17 Hamilton Road Barrie, ON, Canada, L4N 8Y6 Tel: 705-734-0549 Fax: 705-734-1013
Sales Tel: 905-655-7295 e:mail: [email protected] www.aeroex.com
For medium size machine tools! Suitable for medium to large machine tools up to 250 ft³ enclosures. Ideal for high pressure coolant.
The innovative 1st stage mechanical elements separates up to 95% of the mist. The 2nd stage agglomerator is very unique, manufacture in layers of stainless steel wire mesh weaved with oil attracting fibers. Efficiency is high as the air travels though a bed of coarse and fine fibers at a low velocity. Channels between each layer provide exceptional fluid drainage. Optional is a On-Line Cleaning system for flushing out congealed coolant concentrate and fine solids. Alternatively, the media can be cleaned in placed with coolant or water hose. On most applications, cleaning is only every 2-3 years. The 2nd stage media is very durable, lasting 10 – 15 years. Must select coolant or oil filter.
The 3rd stage HEPA filter captures sub-micron mist, smoke and bacteria. Exclusive heavy duty media, no other product holds as much oil or lasts as long. Typical life is 2 – 4 years.
Specifications: Air flow Pressure (HEPA) HEPA Filter Motor rating Voltage (amps)
Speed Temperature (max) Weight Length Width Height (motor) Inlet connection Sound level Clean air measurement
700 – 850 cfm 0 – 3.5” wg 95% @ 0.3 microns 1.5 hp 230/460/3/60 (4.1/2.1) 575/3/60 (2.0) 3450 rpm 160°F / 70°C 330 lbs / 150 kg 40” / 1016 mm 25” / 635 mm 32” / 813 (43” / 1052 mm) 8” 76 dB(A) @ 1m < 0.020 mg/m³
Optional: 2nd stage coolant filter 2nd stage oil filter On-Line Cleaning System HEPA 99.97% @ 0.3 microns
Accessories: Installation kit Suction hose Machine adaptor for suction hose Chip strainer Motor starter panel VFD motor starter
ROX-1100 Mist Eliminator
AEROEX Technologies Inc. 17 Hamilton Road Barrie, ON, Canada, L4N 8Y6 Tel: 705-734-0549 Fax: 705-734-1013
Sales Tel: 905-655-7295 e:mail: [email protected] www.aeroex.com
For medium size machine tools! Suitable for medium to large machine tools up to 350 ft³ enclosures. Ideal for high pressure coolant.
The innovative 1st stage mechanical elements separates up to 95% of the mist. The 2nd stage agglomerator is very unique, manufacture in layers of stainless steel wire mesh weaved with oil attracting fibers. Efficiency is high as the air travels though a bed of coarse and fine fibers at a low velocity. Channels between each layer provide exceptional fluid drainage. Optional is a On-Line Cleaning system for flushing out congealed coolant concentrate and fine solids. Alternatively, the media can be cleaned in placed with coolant or water hose. On most applications, cleaning is only every 2 - 3 years. The 2nd stage media is very durable, lasting 10 - 15 years. Must select coolant or oil filter.
The 3rd stage HEPA filter captures sub-micron mist, smoke and bacteria. Exclusive heavy duty media, no other product holds as much oil or lasts as long. Typical life is 2 – 4 years.
Specifications: Air flow Pressure (HEPA) HEPA filter Motor rating Voltage (amps)
Speed Temperature (max) Weight Length Width Height (motor) Inlet connection Sound level Clean air measurement
950 – 1170 cfm 0 – 3.5” wg 95%@ 0.3 microns 1.5 hp 230/460/3/60 (4.1/2.1) 575/3/60 (2.0) 3450 rpm 160°F / 70°C 330 lbs / 150 kg 40” / 1016 mm 25” / 635 mm 32” / 813 (43” / 1052 mm) 8” 77 dB(A) @ 1m < 0.020 mg/m³
Optional: 2nd stage coolant filter 2nd stage oil filter On-Line Cleaning System HEPA 99.97% @ 0.3 microns
Accessories: Installation kit Suction hose Machine adaptor for suction hose Chip strainer Motor starter panel VFD motor starter
ROX-2000 Mist Eliminator
AEROEX Technologies Inc. 17 Hamilton Road Barrie, ON, Canada, L4N 8Y6 Tel: 705-734-0549 Fax: 705-734-1013
Sales Tel: 905-655-7295 e:mail: [email protected] www.aeroex.com
For Large machine tools and central systems. Suitable for machine tools up to 600 ft³ enclosures. Ideal for high pressure coolant.
The innovative 1st stage mechanical elements separates up to 95% of the mist. The 2nd stage agglomerator is very unique, manufacture in layers of stainless steel wire mesh weaved with oil attracting fibers. Efficiency is high as the air travels though a bed of coarse and fine fibers at a low velocity. Channels between each layer provide exceptional fluid drainage. Optional 2nd stage filter wrap for oil and fine mist applications. Optional On-Line Cleaning system for flushing out congealed coolant concentrate and fine solids. Alternatively, the media can be cleaned in placed with coolant or water hose. On most applications, cleaning is only every 2 - 3 years. The 2nd stage media is very durable, lasting 10 – 15 years. Must select coolant or oil filter.
The 3rd stage HEPA filter captures sub-micron mist, smoke and bacteria. Exclusive heavy duty media, no other product holds as much oil or lasts as long. Typical life is 2 – 4 years.
Specifications: Air flow 1700 –2300 cfm Pressure (HEPA) HEPA Filter Motor rating Voltage (amps)
Speed Temperature (max) Weight Length Width Height Inlet connection Sound level Clean air measurement Color
0 – 3.5” wg 95% @ 0.3 microns 3 hp 230/460/3/60 (7.34/3.67) 575/3/60 (2.94) 3450 rpm 160°F / 70°C 450 lbs / 205 kg 55” (1390 mm) 26” (665 mm ) 67” ( 1700 mm) 10” 75 dB(A) @ 1m < 0.020 mg/m³ off white
Optional: 2nd stage coolant filter 2nd stage oil filter On-Line Cleaning System HEPA 99.97% @ 0.3 microns VFD motor starter control panel (45 – 60 hz)
Accessories: Installation kit Suction hose Machine adaptor for suction hose connection Chip strainer
AEROEX Technologies Inc. 17 Hamilton RoadBarrie, ON, Canada, L4N 8Y6 Tel: 705-734-0549 Fax: 705-734-1013
Sales Tel: 905-655-7295 e:mail: [email protected] www.aeroex.com
Typical Installation
Space for filter removal Motor Starter
(see motor starter leaflet for options)
Oil Drain Hose (2) * 2 x 10 ft with hose clamps and air lock
Suction hose * 6ft with hose clamps
Machine adaptor * (flange with hose nipple)
Chip strainer * Mount in machine tool enclosure over suction inlet.
Installation Options: Installation kit * Motor starter panel Pillar stand Wall mount bracket Plug & Play system, (floor stand with all accessories for quick installation)
Motor Starter Panels Options
1. Motor Starter Panel, NEMA 12 Start/stop, overloads, no pilot light
2. Motor Starter Panel, NEMA 12 Start/stop, overloads, pilot light
3. Motor Starter Panel, NEMA 12 Fused disconnect switch, start/stop, overloads, pilot light.
4. Motor Starter Panel, NEMA 12
Remote control with 24 VDC signal (M code) Fused disconnect switch, overloads, pilot light.
5. Motor Starter Panel, NEMA 12
Remote control with 24 VDC signal (M code) Overloads, pilot light.
6. VFD Motor Starter
Invertek Optidrive VFD NEMA 4X enclosure Start / Stop buttons Overloads and other parameters programmed. For those that want adjustable air flow control.
AEROEX Technologies Inc. 17 Hamilton Road Barrie, ON, Canada, L4N 8Y6 Tel: 705-734-0199 or 0549 Fax: 705-734-1013 e:mail: [email protected]
Sales Tel: 905-655-7295 e:mail: [email protected] www.aeroex.com
AEROEX Technologies Inc.17 Hamilton RoadBarrie, ON, Canada, L4N 8Y6 Tel: 705-734-0549 Fax: 705-734-1013
Sales Tel: 905-655-7295 e:mail: [email protected]
www.aeroex.com
Sizing Guidelines for Mist Eliminators • Machines with low mist generation, infrequent door opening and
large machines, ie medium to large milling machines Enclosure volume (ft³) x 1 to 3 = cfm
• Machines with medium mist generation, average door opening Enclosure volume (ft³) x 4 to 5 = cfm
• Machines with high mist/smoke generation & frequent door opening Enclosure volume (ft³) x 6 to 10 = cfm
• For open areas add 75 – 200 cfm per ft². • Hoods :- 150 – 250 cfm/ft² • Note: multiplier is the number of air exchanges per minute,
ie 4 would be 4 air exchanges per minute or every 15 seconds. 100 ft³ enclosure x 4 = 400 cfm
Air Duct Sizing On central systems, air flow can be controlled by using the correct duct diameter.
Diameter Approx cfm 3” 125 - 175 4” 200 - 300 5” 325 - 475 6” 500 - 675 7” 700 – 900 8” 900 – 1200 10” 1600 – 2100 12” 2100 - 2800