What happens when you mix enzyme and substrate…
Velocity = P/t or -S/tP
rodu
ct
Time
Rate constants are defined for reactions
• V = P/t = -S/t = k1[S]
• k1 is called the rate constant and has units of s-1
• If k1 is small, the reaction rate is slow, if large the reaction is fast
• A k of 0.03 s-1 indicates that 3% of the available S will be converted to P in 1 sec
The “order” of reactions
• A zero order reaction is when the reaction is independent of substrate concentration ([S] >> [E]). System is saturated, V = k1
• A first order reaction is what we have looked at, the rate depends on the first pwer of the concentration of S
• A second order reaction occurs when two substrate molecules are necessary to form product
Rate is related to activation energy
• k = (kT/h) e-G|/RT
Lower activation energy means a higher reaction rate and vice versa
Molecular parameters from reaction rates
Assume the conversion of ES to E + P is non-reversible, then the rate of product formation or reaction velocity is dependent solely on [ES] and k2
E + S ES E + Pk1
k-1
k2
v = d[P]/dt = k2[ES] (1)
If we could measure v and [ES] then we could determine k2, however[ES] is not usually measurable. We can measure substrate (or product)concentrations and the total concentration of enzyme [E]t.
[E]t = [E] + [ES] = free enzyme + enzyme in complex with substrate (2)
Thus, we want to express the rate, v, in terms of substrate concentration[S], and total enzyme concentration [E]t.
Ks = k-1/k1 = [E][S]/[ES]
E + S ES E + Pk1
k-1
k2
From this equation:
Under certain circumstances (if k-1 >>k2), E and S are in equilibrium with ES, with an equilibrium dissociation constant Ks.
However, this assumption is not always valid, thus it is of more general use to introduce the concept of the steady state.
In steady state, the rates of formation and breakdown of [ES] are equal:
k1[E][S] = k-1[[ES] + k2 [ES]
Rearrange to give [ES] = (k1/k-1+k2)[E][S]
Define a constant Km = (k-1+k2/ k1)
Km[ES] = [E][S] (3)
Recall we want to get a formula with measurable quantities [S] and [E]t
Rearrange equation 2 (solve for [E]) and plug into 3 to get:
Km[ES] = [E]t[S] – [ES][S]
Transfer second term on right side to left side to get:
[ES](Km + [S]) = [E]t[S]
Rearrange to
[ES] = [E]t[S]/(Km + [S])
Using equation 1 we can finally solve for v, velocity
v = k2[E]t[S]/(Km + [S]) (4)
This formula is referred to as the Michaelis-Menten equation
Consider a graph that we can construct from the measurable quantities v and [S]
v =
cha
nge
in p
rodu
ct
c
hang
e in
tim
e
Increasing [substrate]At high substrate concentrations, the reaction reaches aMaximum velocity Vmax, because the enzyme molecules aresaturated; every enzyme is occupied by substrate and carryingout the catalytic step
[S] = Km
From these relationships, consider the following:
What is Km and what does it mean?
Km is a ratio of rate constants:
Km = (k-1+k2/ k1)
Thus in our catalyzed reaction, if k2 is much smaller than k-1, Km= k-1/k1 = Ks, the equilibrium constant for [ES] formation.In this case, a large Km means k-1 >>k1, thus the enzyme bindsthe substrate very weakly. However, in a separate instancea large k2 can have a similar effect on Km.
Thus, what is the utility of Km?
The most useful way to think of Km is reflected in the plotof a reaction that follows the Michaelis-Menten equation
In this plot, Km is numerically equal to the substrateConcentration at which the reaction velocity equals half of
its maximum value.
Where [S] = Km, the Michaelis-Menton equation simplifies to
v = Vmax/2
Thus, an enzyme with a high Km requires a higher substrate concentration to achieve a given reaction velocity than an enzyme with a low Km.
What are some enzyme’s Km’s
In considering Vmax mathematically, by making [S] muchlarger than Km the Michaelis-Menten equation simplifies to:
Vmax = k2[E]t
Thus, another way of writing the Michaelis-Menten rateEquation is:
v = Vmax[S] / (Km + [S])Typically, all of this is an oversimplification, and enzyme-Mediated catalysis looks more like:
E + S ES EP E + P k1
k-1
k2 k3
In this more complex system, k2 must be replaced with a more general constant, called kcat
v = kcat [E]t [S]/ (Km + [S])
In the two step reaction we considered first, kcat = k2. For more complex reactions, kcat is a combination of rate constants for all reactions between ES and E + P.
kcat is a rate constant that reflects the maximum number of molecules of substrate that could be converted to product each second per active site. Because the maximum rate is obtained at high [S], when all the active sites are occupied with substrate, kcat (the turnover number) is a measure of how rapidly an enzyme can operate once the active site is filled.
kcat = Vmax/[E]t
What are some kcat values?
Under physiological conditions, enzymes usually do notoperate under saturating substrate conditions. Typically, theratio of [S] to Km is in the range of 0.01-1.0.
When Km >> [S], the Michaelis-Menten equation simplifies to:
v = kcat/Km ([E]t[S])
The ratio kcat/Km is referred to as the specificity constantwhich indicates how well an enzyme can work at low [S].The upper limit of kcat/Km is in the range of 108 to 109 dueto limits of diffusion theory.
Both kinetic parameters contribute to enzyme efficiency
Lineweaver-Burk plots are convenient for determination of Km and kcat
Lineweaver-Burk plots result from taking a double reciprocalof the Michaelis-Menten equation.
v = Vmax[S] / (Km + [S])
1/v = Km/(Vmax[S]) + 1/Vmax
Plotting 1/v on the y-axis and 1/[S] on the x-axis (both known quantities)
The slope is equal to Km/Vmax, the y-intercept is 1/Vmax
And the x-intercept is –1/Km
Kinetics of enzymes with multiple substrates
Ordered Ping-Pong
Enzyme Inhibition – distinct from Lehninger
Competitive Non-competitive
An uncompetitive inhibitor binds to ES
Uncompetitive
Irreversible inhibition destroy enzyme function
• Suicide inactivators
Substrate binding influences rates of activity
Cooperativity Hysteresis
Enzyme modification can alter their activity
• Types of modification– Reversible, non-covalent binding of regulatory
compounds or proteins• Enzymes modified in this manner are called
Allosteric – threonine dehydratase is an example
– Reversible, covalent modification such as phosphorylation (LHCII in chloroplasts)
– Activation via proteolytic cleavage
Regulation of an enzyme’s activityvia post-translational mechanisms
Allostery
Phosphofructokinase
Aspartate carbamoyl transferase
Glycogen phosphorylase
Calmodulin
Modulators can be stimulatory or inhibitory
•A stimulator or activator is often the substrate itself (homotropic)•When the modulator is a molecule other than the substrate the enzyme is said to be heterotropic•Note that allosteric enzymes don’t necessarily have just active sites, but include other sites for modulator binding•Only in homotropic enzymes are active sites also regulatory sites
Allosteric enzymes exist in different “states”
Properties of allosteric enzymes
• Sigmoidal instead of hyperbolic Michaelis-Menten plots
• Reflects cooperative interactions between multiple subunits (allosteric enzymes often contain multiple subunits)
Substrate-activity curves for allosteric enzymes
Enzymes can be covalently modified with a wide assortment of groups
• Phosphoryl, adenylyl, methyl, etc.
• One third to one half of all proteins in a eukaryotic cell are phosphorylated
• Tyrosine, serine, threonine, and histidine are known amino acids to accept phosphate groups from enzymes known as protein kinases
Phosphorylation regulates glycogen phosphorylase
• Catalyzes the
removal of a glucose
from the polymer
glycogen in the form
of G1P
Although covalent –
reversible
Some enzymes are made as inactive precursors
• These inactive precursors are called zymogens or proproteins
• For instance, the serine proteases involved in insect immunity (Kanost) are synthesized as zymogens and are active only following cleavage
• In addition, these enzymes are also regulated by interactions with other cellular proteins
Activation by subtraction
•Naturally, biology is more complicated than one enzyme exhibiting one mode of regulation.
•Enzymes can be regulated by multiple mechanisms!
Enzymes have optimal pH’s
• Given what you know about the ionizable states of various amino acids, this is not surprising.
• Amino acids with ionizable side chains can have important catalytic and structural roles, by changing their protonation state you are likely interfering with their function.
Remember …
• In closely packed protein environments, the pKa of amino acid side chains can be significantly altered.
• For example, a nearby positive charge can lower the pKa of a lysine residue, and a nearby negative charge can increase it (bacteriorhodopsin)
• Such effects can shift the pKa by 2 or more pH units.
• Check out Thematics
Enzymes also have optimal temperatures
• Rate constants ~double
every ten degrees or so
(Arrehenius plot)
Eventually too high temp
disrupts molecular interactions
and denatures protein
Proteins built to work at
different temperatures,
thermophilic, mesophilic,
and psychrophilic
What is enzyme catalysis?
A catalyst is a substancethat accelerates a chemicalreaction without itself undergoing any net change
How do enzymes work?
Fre
e en
ergy
Thermodynamics of catalysis
G0 = H0 – TS0
-RTlnKeqG = Gibbs Free energy
H = Change in heat (energy)of formation
S = Degree of randomness
How do enzymes work?
Transition state vs. Ground State theory
As Pauling among others suggested is catalysis aresult of an enzyme having a higher affinity for thetransition state
Do enzymes accelerate catalysis by putting substrates in close proximity?
OR
Still to this day a topic of debate, but presently it seems to be a little of both
Affinity for the Transition state
E + S E + (S)*
E + S ES (ES)*
knon
kcat
Ks
KTS
KTS = [E][S]*/[ES]* = [(kcat/Km)/knon]-1
For Triosephosphate isomerase KTS = 10-12, and Km = 10-4
Thus, this enzyme binds the transition state eight orders of magnitudemore strongly than the substrate.
Recognition of transition state effects have led to developments in analogs and catalytic antibodies
Specific catalytic mechanisms
General acid-base catalysis Covalent catalysis Metal Ion catalysis (nucleophile, electrophile)
-Carbonic Anhydrase-Serine proteases-Phosphoryl transfer
Most Enzymes use combinations of these mechanisms
Chymotrypsin is a serine protease
Domain duplication and evolution
Substrate binding and catalysis
Establishing a relationship between catalytic mechanism and substrate specificity
Crystal structures of proteins with inhibitors can be insightful
Convergent evolution in proteins
Structural maintenance of active sites
Investigating the structure-function relationshipof proteins
Chemical Modification
Site-directed mutagenesis
Fluorescent labeling
Protein structure determination
One is not enough! Need to use combinations of these methods!
Certain chemicals can react with specific aminoacids to form covalent complexes
N-ethylmaleimide (NEM) reacts with free cysteines
reagent which modifies H, Y or K residues = DEPC, diethyl pyrocarbonatereagent which modifies H, Y or W residues = NBS, N-Bromosuccinimidereagent which modifies H or carboxyl = Woodward's K; N-ethyl-5-phenylisoxazolium 3'sulfonatereagents which modify lysine or primary amino acid residues = Succinic anhydride; TNBS, 2,4,6-trinitrobenzenesulfonic acid)reagent which modifies Y residues = N-acetylimidazolereagent which modifies SER residues = PMSF, Phenylmethyl sulfonamidereagent which modifies R residues = phenylglyoxal
http://www.stratagene.com/manuals/200516.pdf
Amino acids that are close together have been observed to be similar in properties in proteins
Dayhoff matrix
Variant not mutant
Defining roles of amino acids in catalysis through kinetics
Assisted catalysis
• Substrate
• Buffer
Scanning mutagenesis
Alanine scanning mutagenesis - considered semi-conservativeat most positions important for structure, but non-conservativeat most positions important for catalysis
Cysteine scanning mutagenesis – puts a functional group atpositions throughout the protein sequence
FASEB J 1998 Oct;12(13):1281-99 Cys-scanning mutagenesis: a novel approach to structure function relationships in polytopic membrane proteins. Frillingos S, Sahin-Toth M, Wu J, Kaback HR
Example of scanning mutagenesis (lactose permease)
417 amino acid residues
Fluorescent labeling allows you to examine the conformation of the protein
N-(1-pyrene)maleimide
Fluorescence resonance energy transfer (FRET) is away of measuring intra and intermolecular distances