Wasabi Application Note: Commvault
Version: 2017-07-23
Introduction
Wasabi recognizes that most of our customers use our service as part of a broader solution that includes a wide variety of storage applications, gateways, and other storage platforms. In support of our customer’s storage solution ecosystem, Wasabi continually tests and certifies a range of storage related products for use with our service. This application note describes how to use the Commvault platform with the Wasabi ser-vice.
You can configure the Commvault data management tool to use Wasabi storage. This document provides the required configuration and procedures to make the Wasabi S3 interface work with the Commvault applica-tion. This document does not describe details about the application installation, but instead assumes that:
The product being tested for interoperability with Wasabi is already installed in the user’s environment.
The user is familiar with AWS S3 interface concepts, and how to create a storage bucket and access/secret key set on Wasabi.
The information in this application note was verified by the Wasabi Performance and Certification Team (PACT) using the Wasabi service in July 2017 and Commvault Commcell Console, version 11.
Please contact Wasabi Customer Support if you have additional questions.
Technical Support The Wasabi web site has the latest product information. Use this resource to review product information, download software updates, contact technical support, access the Wasabi knowledge base, or provide feed-back on Wasabi documentation and online help:
www.wasabi.com
Use this email address to contact a Wasabi Customer Support representative:
Wasabi Application Note: Commvault, Version 2017-07-23 2
Required Configuration
Configuration step: Tool: Refer to:
1. Set up a Wasabi bucket. Wasabi Management Console
Wasabi Management Console User Guide
2. Create and copy a Wasabi access key ID and secret access key.
Wasabi Management Console
Wasabi Management Console User Guide
3. Set up a Commvault storage library. Commvault Commcell Console
Commvault documentation and the examples below
4. Set up a Commvault storage policy. Commvault Commcell Console
Commvault documentation and the examples below (page 6)
5. Back up the Commvault storage library folder to Wasabi.
Commvault Commcell Console
Commvault documentation and the examples below (page 9)
Set Up a Commvault Storage Library
In Commvault Storage Resources, right-click on Libraries and select Add. Then, select Cloud Storage Library. On the Add Cloud Storage dialog, enter general information and be sure to include:
Field Entry
Type Amazon S3
Authentication Access & Secret Keys
Service Host s3.wasabisys.com
Access Key ID Enter the key that you created and copied in Step 2 of the Required Configura-tion, above
Secret Access Key Enter the key that you created and copied in Step 2 of the Required Configura-tion, above
Bucket Enter the name of the bucket that you set up in Step 1 of the Required Configura-tion, above
Refer to the following examples.
Wasabi Application Note: Commvault, Version 2017-07-23 3
Wasabi Application Note: Commvault, Version 2017-07-23 4
Wasabi Application Note: Commvault, Version 2017-07-23 5
Set Up a Commvault Storage Policy
In Policies, right-click on Storage Policies and select New Storage Policy. Using the Create Storage Policy Wiz-ard, define the policy (such as Wasabi Cloud):
Wasabi Application Note: Commvault, Version 2017-07-23 6
Enter information and be sure to include:
Option Response
Storage Policy Type Data Protection and Archiving
Use Existing Global Deduplication Policy
No
Library for Primary Copy Select the storage library that you set up, above. For example:
Wasabi Application Note: Commvault, Version 2017-07-23 7
Enter remaining information as appropriate for your application. For example:
Wasabi Application Note: Commvault, Version 2017-07-23 8
Back Up the Commvault Storage
Library Folder to Wasabi
Right-click on the file system folder to be backed up and select Properties. Specify the General subclient prop-erties. For example:
Wasabi Application Note: Commvault, Version 2017-07-23 9
On the Storage Device tab, be sure to select the Data Storage Policy as the one you set up above (such as Wasabi Cloud):
Once the properties are set up, right-click on the file system folder to be backed up and select Backup.
Wasabi Application Note: Commvault, Version 2017-07-23 10
Copyright
Notice Information in this guide is subject to change without notice. Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this guide may be reproduced or transmitted in any form by means electronic or mechanical, for any purpose, without express written permission of Wasabi Technologies, Inc.
Trademarks WASABI and the WASABI Logo are trademarks of Wasabi Technologies, Inc. and may not be used without permission of Wasabi Technologies, Inc. All other names are used for identification purposes only and are trademarks or registered trademarks of their respective companies.
Copyright © 2017by Wasabi Technologies, Inc.
111 Huntington AvenueBoston, MA 02199
United States
All Rights Reserved
Visit us at http://www.wasabi.com
Wasabi Application Note: Commvault, Version 2017-07-23 11