General Health System VPN Instructions for iPhone or iPadThese instructions do not work while connected to “BRGWNET” internal network.
Table of ContentsVPN Instructions for iPhone or iPad............................................................................................................1
Installation and Configuration.................................................................................................................1
Establishing a VPN Connection................................................................................................................2
Prerequisites........................................................................................................................................2
Detailed Steps......................................................................................................................................2
Feedback.....................................................................................................................................................4
VPN Instructions for iPhone or iPad
Installation and Configuration
You can install the Cisco AnyConnect Secure Mobility client for Apple iOS from the Apple App Store, as follows:
1. Open the App Store.
2. Select Search. 3. In the Search Box, enter anyconnect and tap cisco anyconnect in the Suggestions list. 4. Tap AnyConnect. 5. Tap Free, then INSTALL APP. 6. Select Install.7. Tap the Cisco AnyConnect Secure Mobility Client icon.
8. A confirmation opens the first time you start AnyConnect on the device, tap OK.
9. Tap Add VPN Connection Note: Figure on the right shows the screen for the iPad.
General Health System VPN Instructions for iPhone or iPadThese instructions do not work while connected to “BRGWNET” internal network.
10. Enter the following to configure the BRG VPN:
a. Description: BRG VPNb. Server Address: vpn.brgeneral.org
11. Tap Save
Establishing a VPN Connection
PrerequisitesEnsure that you are not connected to BRGWNET wireless network. You must have a LAN connection or a connection to your service provider outside of the hospital network.
Detailed Steps1. Open the Cisco AnyConnect Secure Mobility Client icon.
2. Tap ON
General Health System VPN Instructions for iPhone or iPadThese instructions do not work while connected to “BRGWNET” internal network.
3. You will be prompted to login.
a. Make sure the GHSSSL Group is selected.b. Enter your Usernamec. Enter your Password
4. Tap Connect5. You will see Status Connected as well as VPN listed in iPhone/iPad status bar.
General Health System VPN Instructions for iPhone or iPadThese instructions do not work while connected to “BRGWNET” internal network.
6. To disconnect, open Cisco AnyConnect and tap OFF
FeedbackFor immediate support, please call 225-381-6440 or email [email protected].
Please provide feedback on this process and documentation to Brandon Woods or Brittany Hatcher.
For more detailed information on the AnyConnect settings go to this link:http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect30/user/guide/ipad-ugac-ios.pdf