visionsystems
T: 01444 235621 E: [email protected] www.baty.co.uk
Baty International has been in business since 1932.O r i g i n a l l y, a manufacturer of high precision dial indicatorsand other associated instruments such as cylinder boregauges.
Baty soon diversified into non-contact measurement w i t hOptical Profile Projectors and the Baty ‘Shadograph’ serieshas since become an industry standard in profile projectors.These products are still manufactured in Sussex inaccordance with ISO 9001:2000.
For decades Baty has employed a team of Field BasedService Engineers. Today, our service department is thelargest ISO 9001:2000 accredited Projector ServiceOrganisation in the UK offering on-site Service, Training,Retrofits, and Repair for all makes of Profile Projectors andVision Systems.
In keeping with its gauging roots, Baty acquired John Bulland British Indicators, extending its gauging range toinclude calipers and flexible fixturing.
The range was then completed in the eighties when ourfirst camera based Video Inspectors were developed. VideoEdge Detection (VED) was soon added giving rise toincreased accuracy, repeatability and measuring speed.
Now all our Vision Systems offer the best of both worldswith the combination of non-contact (VED) and contactmeasurement using Renishaw’s extensive touch proberange.
Today, Baty is an ISO 9001:2000 accredited company thatoffers a range of Metrology Instruments from Hand Tools toVision Systems, offering measuring solutions for almostevery measurement application in modern manufacturingand now, we’ve put them together into one catalogue foryour convenience.
So, whether you need a digital caliper or a full CNC multi-sensing Vision System...
...it’s here.
We look forward to talking to you.
Geoff JacksonManaging Director
Tel +44 (0) 1444 235621
Fax +44 (0) 1444 246985
Email: [email protected]
Website: www.baty.co.uk
T: 01444 235621 E: [email protected] www.baty.co.uk 3
VuMaster – 2D Manual / 2D CNC 4
2D Fusion Software 5
Venture – 3D Manual 6
Venture – 3D Manual Fusion 3D Software 7
Fusion Software 8
Venture – 3D CNC 10
Venture Options 12
Flexmaster Fixtures 13
Shadomaster 14
Venture Plus 16
Vision Systems Technical Specification 18
CONTENTS
T: 01444 235621
VuMaster is a manual 2D visionsystem with a massive difference.
Due to the newly patentedColourmap™ scale system, theVuMaster does not have a conventionalstage or encoders – just a floatingmeasuring camera that movesanywhere in the measuring range. The result is fast, accurate, ‘non contact’measurement over a much largermeasuring range – 400mm x 300mm to be exact!
Because the camera moves and the partstays still, there is often no need forexpensive and time consuming workholding devices.
VuMaster is either operated manually orinspection routines can be recorded andstored. When played back, these‘programs’ guide the operator througha pre-defined inspection procedurerecreating the same lighting conditionsand using ‘Video Edge Detection’ toautomatically ’capture’ feature data.
Finally, a report is generated in the formof a fully dimensioned drawing of themeasured part.
Standard features● Large 400mm x 300mm measuring
range
● Patented measuring technology
● Teach and repeat part programming
● Video edge detection
● Digital zoom
● Fully integrated system – everything is included: built-in PC, 19" flat screen monitor and printer
● Programmable segmented LEDlighting system
● Motorised autofocus
● Image grab
* CNC option available
4
VUMASTER – 2D MANUAL / 2D CNC
E: [email protected] www.baty.co.uk
Baty’s PC based Fusion software ispowerful and easy to use. The graphicaluser interface minimises keyboard useand the need for multiple toolbars. Theresult is a software package thatenables the user to produce a fullydimensioned drawing of the measuredpart in minutes!
Other standard reports include tabulated results and multiple partreports all of which can be exported toExcel® in a single click.
Video Edge DetectionVideo edge detection (VED) ensures arepeatable result without relying on theskill of the operator. Hundreds of datapoints can be taken in an instant tocalculate standard geometric features.Standard VED tools include arc, circle,line, point, focus and curve.
Profile ScanningThe curve tool automatically traces theprofile of an undefined part. Theresulting data-point cloud can then becompared to a pre-toleranced DXFmaster for best fit analysis.
Once ‘fitted’ the data points appear redor green to indicate whether intolerance. In addition to best fit,conventional dimensions can also beapplied to the scan.
SPC IncludedBaty Fusion software will also display SPC batch information for multiplecomponents. Information given includesmaximum value in batch, minimumvalue, user definable sigma value, CPand CPK value, mean shift and alsoplots two different charts of the batchdata. SPC data can also be exported toExcel™ for further analysis.
Dimensioned Part ViewMeasured results are displayed in theform of a fully dimensioned drawing.Dimensions within the specifiedtolerance are shown in green whilstdimensions out of tolerance are shownin red for immediate visual status of themeasured part.
5
Bench Top System
640 800
762583
2D FUSION SOFTWARE
The highly successful Venture rangeincludes both manual and full CNCsystems that cover two standardmeasuring ranges:
The VI-2510 has a 250mm x 125mm x165mm X,Y,Z measuring capacity andthe VI-3030 has 300mm x 300mm x165mm.
The original design brief was to bringtogether high-end software functionalitywith a proven mechanical design at acompetitive price. With over 20 yearsexperience as a manufacturer of visionsystems and over 75 years in metrology,Baty have built up a sound knowledgeof vision application re q u i re m e n t s .W h e t h e r manual or CNC, we believethe newly revised Venture rangeincludes more functionality as standardthan any other vision system packageon the market.
Venture QC3This is a manually operated 3D visionsystem designed for the shop floor. Thefully integrated QC300 measuringsystem has a colour touch screen sothere is no need for a mouse orkeyboard to clutter the workstation.
Full geometric functionality is includedso features like circles, lines arcs andpoints can be measured using dedicatedtools. Data points are automaticallytaken along the edge of the featureusing video edge detection, then allmeasurements are automatically savedin the on-screen features list.
The programmable LED lighting is alsocontrolled using the touch screen.Surface, through the lens and profilelighting conditions can be adjusted toensure that the feature edge is perfectlyilluminated.
Tolerances are set for each dimension sothat the final inspection report clearlydisplays a pass or fail status.
For parts that need to be measuredregularly, measurement routines can be‘recorded’, saved and played back.During this process the operator isguided through the process by thedisplay. Magnification, VED toolpositioning, number of data pointsrequired and the exact lightingconditions are all reproduced by thesystem ensuring that each part in abatch is measured the same way foroptimum repeatability.
Standard Venture system featuresinclude:● High resolution 0.5 µm scales for
increased accuracy● 6.5:1 Zoom lens● Programmable segmented LED lighting
system● Z axis dovetail slide mount for increased
Z axis capacity● High precision cross-roller stage● Ultra-smooth plain rod drives
Standard QC3 features:● Auto video edge detection tools● Auto programming● On screen focus meter (Man) / Auto-
focus (CNC)● Colour touch screen display
VENTURE – 3D MANUAL
T: 01444 2356216
Venture AB3-VThis model features Baty’s powerfulFusion software with full 3Dfunctionality. The measured part cannow be dimensioned in all threeprojections showing true 3D results.
Touch ProbeThe popular Renishaw Touch probeoption often helps to solve complex 3Dmeasurement applications. Fusionallows the use of both touch probe andcamera measurements in the sameinspection so that features that are outof the camera’s view can be measuredwithout re-positioning the part.
As with all Ventures, a high precisionzoom lens is featured as standard. Thismanual version has 6 preset zoompositions which provide a magnificationrange from approx. 30x – 200x* whichcan be extended with the use ofauxiliary lenses. Each preset position ispre-calibrated enabling the user toquickly select the optimummagnification for each measurementand continue measuring.
Easy ReportingIn addition to a graphical representationof the measured part, detailed reportscan be instantly created showing thefeature name, nominal dimension,actual, error, upper and lower limits anda green pass or red fail label for eachmeasured dimension in tabulatedformat. Geometric tolerance details can also be displayed along with athumbnail view of the part and batch/customer information.
The entire report can be duplicated asan Excel workbook for email.
Standard Fusion system features include:● Fully dimensioned part view● CAD import / export● Profile scanning and best fit to CAD master● SPC batch information including control
charts● Auto output to excel● 64 LED programmable segmented surface
illumination● Advanced video edge detection● TTL light and collimated profile illumination
Venture AB3-V options:● Motorised Z axis● Autofocus● Renishaw touch probe● Manually indexable rotary axis
Venture AB3-V
Advanced video edge detection tools and LEDlighting are standard on Fusion based systems
VENTURE – 3D MANUAL FUSION 3D SOFTWARE
E: [email protected] www.baty.co.uk 7
8
Fusion metrology software has beenthe foundation for Baty's camerabased inspection systems for thelast decade. The combination ofease of use, advanced edgedetection and graphical reportinghas established this remarkablesoftware as the standard by whichother vision packages are measured.
Dimensioned Part View
Measured results are displayed in theform of a fully dimensioned drawing.Dimensions within the specifiedtolerance are shown in green whilstdimensions out of tolerance are shownin red for immediate visual status of themeasured part.
Geometric tolerances can also bedisplayed using the standard drawingpractice. The final dimensioned partview can then be printed as anengineering drawing with a traditionaldrawing frame containing companydetails, customer and part details, dateand inspection name.
SPC Included
Baty Fusion software will also displaySPC batch information for multiplecomponents. Information given includesmaximum value in batch, minimumvalue, user definable sigma value, CPKvalue, mean shift and also plots twodifferent charts of the batch data.
Easy Reporting
In addition to the graphicalrepresentation above, detailed reportscan be instantly created showing thefeature name, nominal dimension,actual, error, upper and lower limits anda green pass or red fail label for eachmeasured dimension in tabulatedformat. Geometric tolerance details canalso be displayed along with athumbnail view of the part andbatch/customer information.
The entire report can be duplicated asan Excel workbook for email.
FUSION SOFTWARE
T: 01444 235621
Video Edge Detection
Video edge detection (VED) ensures arepeatable result without relying on theskill of the operator. Hundreds of datapoints can be taken in an instant tocalculate standard geometric features.Standard VED tools include arc, circle,line, point, focus and curve.
Profile ScanningThe curve tool automatically traces theprofile of an undefined part. Theresulting data-point cloud can then becompared to a pre-toleranced DXFmaster for best fit analysis.
Touch Probe CompatibleFusion metrology software is ready toaccept touch probe measurements aswell as optical and camera based.Offsets for each measuring system canbe calculated enabling you to use acombination of non-contactmeasurements in the same inspection.An optional probe storage rack can alsobe used to allow automatic probechanges mid program.
CNC OperationThe CNC option enables fully automaticpart inspection with teach and repeatprogramming and manual joystickcontrol. Parts can be palletised for batchinspection and reports are generatedautomatically.
CAD Option
Allows measurement data points takenanywhere on the part surface to becompared to a 3D IGES or TIFF CADmodel.
FUSION SOFTWARE
E: [email protected] www.baty.co.uk 9
1 0
Venture CNC models take the powerof fusion software one stage furt h e rby completely automating theinspection process. Now advancedf e a t u res like scanning and best fittingcan be done quickly without takingup the time of skilled operators. CNC programming is a simple teachand repeat process. Just measure thepart once and a full CNC program iscreated automatically. The zoom lenscan also be controlled so thatmagnification changes are all recordedinto the program.
Large Measurement VolumeThe use of a touch probe is optimisedon a CNC system. Measurements fromdata points taken using the touch probecan be combined with those takenusing video edge detection for optimumspeed and reduced inspection times.
A probe changer rack can be installedso that probe modules fitted with avariety of pre-calibrated styli can also beused in the same inspection. When achange of stylus is required, the systemautomatically puts the current probemodule back in the rack and picks upthe next to continue the inspectionprocess.
When programming using the touchprobe, use only the minimum pointsrequired to define each element. Thensimply edit in the optimum number ofpoints for each element. The new probepath is then automatically created whenthe program is played, cutting downboth programming and inspection time.
Standard CNC System FeaturesInclude:● Teach and repeat programming● Programmable segmented LED
lighting● High resolution 0.5µm scales for
increased accuracy● CAD import / export● Scanning & best fitting● Fully dimensioned part view● SPC included● One click output to Excel™● Autofocus● 165mm Z axis measuring range
on adjustable dovetail slide● 250mm x 125mm and
300mm x 300mm XY stages available
● Auto program from CAD
Every system is supplied with a factory calibration certificate and can be supplied with our own glass reference standard for field of view pixel calibration and verification of measurements.
VENTURE – 3D CNC
T: 01444 235621
Graphical reports show the measuredpart as a dimensioned drawing with ‘intolerance’ dims shown in green and‘out of tolerance’ dims shown in red foran instant pass / fail classification.Geometric call outs can also be shownas well as datum features and trueposition.
Supplementary tabulated reports shownominals as well as tolerance valueswith a ‘PASS’ or ‘FAIL’
SPC information can either be reportedor exported to excel. Distribution andcontrol charts are also produced.
Programmable Segmented LightLighting is critical to ensure that thecorrect edge is measured. Baty’s newprogrammable LED lighting head allowsthe user to define any segment patternto be switched on. This means thatoblique lighting conditions can beachieved to illuminate more difficult edges.
Segments can then be rotated andintensity varied to suit the radialposition of the edge. Once set, thelighting condition for each measuredfeature is now automaticallyprogrammed and will be reproduced bythe software each time a new part ismeasured. Through the lens (TTL)lighting is included for applications likeblind bore measurement. 64 whiteLED’s are used to ensure Venture’s highquality colour image is achieved.
Only now can this functionality becombined with traditional touch probetechnology to offer the ultimate in largeformat multi-sensing Vision systems –Venture Plus.
Advanced errormapping.
Once the X-Z and Y-Zalignment and calibrationis completed, everyVenture goes through anerror mapping processusing a calibrated mastergrid as a reference. Anyerrors in X, Y, Xdy, Ydx and X-Y squareness are compensated and verified. The grid is then re-positioned in the Z axisand the process repeatedto eliminate Xdz and Ydzerrors.
The Venture range of products aredesigned and built at Baty's Burgess Hillfactory in the south of England. Thelatest 3D modelling techniques wereused to optimise the new base / columndesign to ensure stability.
Touch Pro b e
The popular Renishaw Touch probe option can becombined with a probe module storage rack forautomatic probe changes.
VENTURE – 3D CNC
E: [email protected] www.baty.co.uk 1 1
1 2
CAD
3D CAD models (STEP or IGES) can beimported and are shown in a floatingwindow. After alignment to the CADmodel, points are taken anywhere onthe part surface and displayed on theCAD model. The points appear colourcoded so as to indicate their distancefrom the nominal surface.
Rotary Axis
A rotary indexing device is used torotate the part and bring the requiredfeatures into the camera view.
Rotations are automatically recordedinto the inspection program.
6 jaw keyless chuck to suit O/D rangeof 2-44mm can be mountedhorizontally (as shown) or vertically.
A CNC rotary axis is used to rotate thepart to a pre-determined angle for thenext set of measurements to be taken.
SA-196
Cast vee blocks and extended centresfor the 2510 Venture model
UFB-3030
Universal fixture base provides fixturemounting slots compatible with allprojector accessories.
Venture Stand
Rigid steel stand with granite top andintegral PC / controller shelf for Venture2510 and 3030 models
CAL-MAG 2 Glass ReferenceStandard
Calibration standard with nominaldiameters for field of viewmeasurement verification and pixelcalibration.
SA-196
UFB-3030
Venture Stand
CAL-MAG 2
660111 179 1000
VENTURE OPTIONS
T: 01444 235621
Flexmaster components introducenew technology. Our self-wedgingclamps offer near zero clampingforce. Sliding t-nut tooling blocksprovide an infinite variety of fixturesolutions.
Even the corner joiners for our frameare dual purpose, providing ridges thatallow backlighting to illuminate edgesfor inspection.
Standard kits include the following:
Components
Fixture frame assembly, including thefollowing:
4 off linear slide-frames with t-slots,and laser marked reference scales
4 off ridged two-way T-nuts for cornerjoining and part location
4 off sliding hold-down brackets withslots for 2 axis adjustment to mount t-slot frames to venture stage frame
Fasteners
30 off stainless grub screws
3 off long T-nuts
6 off short T-nuts
2 off T-nuts with machined vee in end
12 off locknut with threaded ID. (Foruse with clamp rods, thumbscrew, andspherical locator pin)
Clamps and Rods
2 off narrow ‘soft-touch’ self-wedgingtail-spring clamp
2 off wide ‘soft-touch’ self-wedgingtail-spring clamp
2 off self-wedging V-clamp
2 off ridged corner locator clamp
3 off stainless clamp rod. (Use withlocknut to attach rods to slide-frame,for self-wedging clamps)
3 off stainless clamp rod
2 off stainless clamp rod
Locators
3 off sliding tool blocks with threadedholes for vertical clamp and adjustment
4 off adjustable rest button, stainless,spherical top
2 off additional ridged two-way t-nutsfor part location
1 off case
1 3
FM-2510 Kit
FLEXMASTER FIXTURES
E: [email protected] www.baty.co.uk
The ShadoMaster is a horizontalcamera based video inspectionsystem that is particularly aimed atturned part measurement.
The cast iron stage has tooling slotsaligned with the optical path tofacilitate the mounting of work holdingfixtures such as vee-blocks and centres.
A selection of video edge scanningtools are used to scan the profile of theshaft and Baty’s Fusion software convert sthis scanned data into a dimensioneddrawing of the measured part.
Interchangeable fixed objective lensesare used to determine the field of viewand pixel size which can be sub-micronfor close tolerance requirements.
The VI-3015H can measure shafts up to300mm in length with a maximumdiameter of 150mm providing theoverall weight does not exceed 25KG
The PC based controller runs on aWindows 7 operating system and iscompletely integrated within the chassisso the installation is both quick andeasy with no trailing cables. The systemis also supplied with LED surfaceillumination which is ideal forilluminating the various facets of formcutting tools for example. The LEDlighting consists of 16 high intensitywhite LEDS which can be switched onin clusters to form a segment which canbe radially positioned by using themouse. This means that the light can bepositioned exactly where it needs to bein order for the edge detection tools tomeasure the edges that you areinterested in. Once programmed, thelighting conditions are reproduced bythe software for every inspection toensure optimum repeatability.
1 4
ShadoMasterVI-3015
Programmable LED illuminationallows surface features to bemeasured using video edgedetection
SHADOMASTER
T: 01444 235621
The ShadoMaster 3015 has a solidcast iron stage 300 x 150 x 60 X,Y,Zmeasuring range. Dovetail slotsprovide mounting for work holdingaccessories which are naturallyaligned with the optical path.
A choice of 5 interchangeable fixedobjective lenses provide a magnificationrange from 20x to 200x and digitalzooming allows further enhancement toover 800x.
● PC based 3 axis Fusion software withfull 3D geometric functionality
● Enhanced video edge detection tools with autofocus, auto program from dxf
● CNC profile scanning and best fit analysis, SPC
● Part view can be printed as dimensioned drawing
● Programmable segmented LED surface lighting provides a detailed colour surface image and a collimated profile light ensures a crisp profile image
● PC controller is integral and 2 x 19" LCD monitors are chassis mounted with keyboard shelf for ease of use
● Automatic shaft profile scan
Profile Scanning
The curve tool automatically traces theprofile of an undefined part. Theresulting data-point cloud can then becompared to a pre-toleranced DXFmaster for best fit analysis.
Once ‘fitted’ the data points appear redor green to indicate whether intolerance. In addition to best fit,conventional dimensions can also beapplied to the scan.
SPC Included
Baty Fusion software will also display SPC batch information for multiplecomponents. Information given includesmaximum value in batch, minimumvalue, user definable sigma value, CPand CPK value, mean shift and alsoplots two different charts of the batchdata. SPC data can also be exported toExcel™ for further analysis.
1 5
Standard system features include:● Collimated profile light ideal for shaft measurement
● Choice of 5 fixed objective lenses from 20x - 200x
● 300mm x 150mm measuring range.
● Programmable LED surface illumination with Autofocus for pocket depth measurement
● Integral Windows 7 controller
● Helix light adjustment for screw thread measurement
● Auto program from CAD
958 804
496
905
SHADOMASTER
E: [email protected] www.baty.co.uk
1 6
Venture Plus VP-6460
The Venture Plus range includes allof the standard Venture featureswith a little more... measuringrange that is.
Large Measurement VolumeThe Venture Plus is available in threemodels:
VP-6460 with 640mm x 600mm x250mm measuring range
VP6490 with 640mm x 900mm x250mm measuring range
VP100150 with 1000mm x 1500mm x400mm measuring range
The bridge type construction is allaluminium resulting in low inertia andlow thermal mass. Air bearings are usedon all axes and a granite Y beam isused for increased accuracy. This ensure sthat the machine will expand a n dcontract uniformly with temperaturechanges ensuring minimal distortion andsubsequent errors. Ambient temperaturecan be compensated for within theFusion software making Venture Plusideal for use on the shop floor.
Complete with our standard zoomoptics and lighting, Venture Plus offersthe same level of camera basedfunctionality as every other Venture.
Standard CNC System FeaturesInclude:● Teach and repeat programming● Programmable segmented LED
lighting● High resolution 0.5µm scales for
increased accuracy● CAD import / export● Scanning & best fitting● Fully dimensioned part view● SPC included● One click output to Excel™● Autofocus● Renishaw TP20 touch probe joint
VENTURE PLUS
T: 01444 235621
Venture Plus additional featuresinclude:● Rigid, low mass bridge construction
● Integral zoom optics
● Patented light table technology
● 250mm Z axis measuring range
● 640mm x 640mm and 640mm x 940mm bridge formats available
● New 1000mm x 1500mm x 400mm model now available
● Optional automatic temperaturecompensation
● Optional multi function joystick with colour touch screen display
Options include:
Multi-function joystick with colour touch screen
Features:● High quality 3 axis hall effect joystick
● Speedwheel for feedrate control
● High resolution colour touch screen
● Easy to use graphic interface
● Hardwired emergency stop button
● Built in speaker for audio feedback
● Left and right handed operation
● 3m CAT5 cable easily extendable
● Remote operation of Windows PC
● Software extendable user interface
1 7
496
10301330
8501150810
1140
VENTURE PLUS
E: [email protected] www.baty.co.uk
1 8
MANUAL SYSTEMSVM-4030 VuMaster VI-2510 Venture VI-3030 Venture ShadoMaster VI-3015
X, Y, Z measuring range (mm) 400 x 300 250 x 125 x 165 300 x 300 x 165 300 x 150 x 40
Workstage area (mm) 420 x 320 414 x 262 464 x 462 475 x 127
Max workpiece load (kg) 25 25 25 15
Drive type Manual Manual Manual Manual
Bearings Air bearings Cross roller rail guide Cross roller rail guide Cross roller rail guide
Camera type 2048 x 1590 pixel colour USB2 camera with 8 x 9mm chip and dynamic latch
Optics / lighting Fixed objective telecentric Interchangeable fixed objectivelens with programmable telecentric lenses with
LED lighting programmable 16LEDsurface and collimated
profile lighting
Resolution 0.001mm 0.0005mm 0.0005mm 0.0005mm
Accuracy 7.5µm 2+L / 100 2+L / 100 2+L / 100
Max field of view (FOV) 12mm 16mm* 16mm* 13.5mm
Magnification 20x 350x 20x - 200x optical magnificationusing fixed lenses with
digital zoom enhancementto over 1200x
Touch probe option available No Yes Yes No
Probe type N/A Renishaw TP20 Renishaw TP20 N/A
Change rack compatible? N/A N/A N/A N/A
*using optional 0.5x adapter lens
6.5:1 detent zoom lens. Fully programmablesoftware controlled white LED segmented surfacelighting head with understage and through the
lens (TTL) lighting as standard
Optical zoom ratio 27x - 175x on 17’’ monitor with digital zoom enhancement to over 1200x
VM-4030VuMaster
400 x 300
420mm x 320mm
25
CNC / handwheel
Air bearings
100mm / sec
0.001mm
7.5µm
12mm
20-350x
No
N/A
N/A
VI-2510Venture
250 x 125 x 165
414mm x 262mm
25
CNC / joystick
Cross roller rail guide
200mm / sec
0.0005mm
2+L / 100
16mm*
Yes
Renishaw TP20
Yes
VI-3030Venture
300 x 300 x 165
464mm x 462mm
25
CNC / joystick
Cross roller rail guide
200mm / sec
0.0005mm
2+L / 100
16mm*
Yes
Renishaw TP20
Yes
VP-6460Venture Plus
640 x 600 x 250
700mm x 940mm
75
CNC / joystick
Air bearings
350mm / sec
0.0005mm
2.5+L / 150
16mm*
Yes
Renishaw TP20
Yes
VP-6490Venture Plus
640 x 900 x 250
700mm x 1240mm
75
CNC / joystick
Air bearings
350mm / sec
0.0005mm
2.5+L / 150
16mm*
Yes
Renishaw TP20
Yes
VP-100150Venture Plus
1000 x 1500 x 400
1050mm x 1850mm
75
CNC / joystick
Air bearings
350mm / sec
0.0005mm
2.5+L / 150
16mm*
Yes
Renishaw TP20
Yes
VI-3015ShadoMaster
300 x 150 x 40
475mm x 127mm
15
CNC / joystick
Cross roller rail guide
100mm / sec
0.0005mm
2.5+L / 150
13.5mm
Yes
Renishaw TP20
No
X, Y, Z measuring range (mm)
Workstage area
Max workpiece load (kg)
Drive type
Bearings
Max drive speed
Camera type
Optics / lighting
Resolution
Accuracy
Max field of view (FOV)
Magnification
Touch probe option available
Probe type
Change rack compatible?
6.5:1 detent zoom lens. Fully programmable software controlled white LED segmented surface lighting headwith understage and through the lens (TTL) lighting as standard
Fixed objectivetelecentric lens
with programmableLED lighting
2048 x 1590 pixel colour USB2 camera with 8 x 9mm chip and dynamic latch
CNC SYSTEMS
*using optional 0.5x adapter lens
VISION SYSTEMS TECHNICAL SPECIFICATION
T: 01444 235621
Burgess HillGoddards GreenA2300TwinehamHickstead Village
Burgess HillGoddards GreenA2300
VictoriaInd. Est.
TownCentre
HassocksA273
Sectiondetailed on left
Superstore
Haywards Hth A273BrightonLondonInd. Est.
Town CentreB2036DitchlingCommon(B2113)
Haywards HeathA273WivelsfieldStation
CONSORT
VICTORIA
BRAYBONBUSINESS
PARK
LEY
Burgess HillHassocksA273
Burgess HillHassocksA273
A273 ToHaywardsHeath &
HaywardsHeath
A273 ToA23 &
Brighton
To Crawley& Gatwick
Airport
LOCATOR MAP
To Brighton
THE TRIANGLE
VICTORIAIND. EST.
DO IT ALL
TESCO
TESCO
HICKSTEADSHOWGROUND
How to find us...
Baty International
Victoria Road, Burgess Hill, West Sussex RH15 9LR
Tel +44 (0) 1444 235621
Fax +44 (0) 1444 246985
Email: [email protected]
Website: www.baty.co.uk
E: [email protected] www.baty.co.uk
Baty International
Victoria Road, Burgess Hill,
West Sussex RH15 9LR
Tel +44 (0) 1444 235621
Fax +44 (0) 1444 246985
Email: [email protected]
Website: www.baty.co.uk
Official sponsors of British Superbike Team
Distributed by: