Alternative Fuel & PowerOur Product Commitment:
Non-Toxic
Non-Reactive
Non-Carcinogenic
Readily Biodegradable
Derived from renewable biobased
resources
Safe to use, store and dispose of
Alternative Fuel & PowerSAFE CARE® products
do not contain:
Petroleum distillates Phenolics
Glycol ethers Sulfonics
Terpenes Synthetics
Chlorines Builders / reagents
Caustics Ammoniates
Silicones Metasillicates
Dyes / Fragrances Aldehydes
Cleaners, Solvents & Specialty Products
Safely Cleaning Planet Earth®
Core Products:
SC-1000 Aqueous Cleaner Concentrate
SC-Aircraft & Metal Cleaner Concentrate
SC-SuperSolv Safety Solvent
SC-EZ-Solv Safety Solvent
SC-MaxiSolv Safety Solvent
SC-ActiSolv Safety Solvent
SC-OmniBrite Acid
SC-Safe-T-Solv Concrete Cleaner
Cleaners, Solvents & Specialty Products
Safely Cleaning Planet Earth®
Our most versatile and powerful non-ionic surfactant
cleaner used in a variety of industrial applications.
Certifications include:
USEPA National Oil & Hazardous Substances
Pollution Contingency Program (NCP)
USEPA Design for the Environment (DfE)
USDA NSF #046649 – A1 & L1
California SCAQMD – Clean Air Solvent
NSN 6850-01-474-1273 (5 gal.)
NSN 6850-01-474-1311 (55 gal.)
SC-1000 Aqueous Cleaner Concentrate
Cleaners, Solvents & Specialty Products
Safely Cleaning Planet Earth®
SC-1000 Aqueous Cleaner Concentrate
SC-1000 can not create a
standing emulsion - illustrates
the separation of crude oil and water using
SC-1000 Aqueous Cleaner Concentrate.
Cleaners, Solvents & Specialty Products
Safely Cleaning Planet Earth®
SC-Aircraft & Metal Cleaner Concentrate
An advanced surfactant system especially formulated for
use on non-ferrous and soft metal surfaces such as
aluminum. Certifications include:
US Air Force MIL-PRF-87937D, Type IV
US Navy MIL-PRF-85570C, Type II
BOEING D6-17487, Revision N
California SCAQMD – Clean Air Solvent
NSN 6850-01-433-0873 (5 gal.)
NSN 6850-01-429-2371 (55-gal.)
NSN 6850-01-506-7708 (bulk)
Cleaners, Solvents & Specialty Products
Safely Cleaning Planet Earth®
Surfactant Technology
Schematic illustration of the manner in which the
colloid particles called micelles perform in reducing
surface tension of water in a very dilute solution.
Industrial
Applications
Transportation:
Aviation
Marine
Rail/Bus
Trucking
Automotive
Transportation:
Exterior / Interior Cleaning
Graffiti, Tar & Gum Removal
Engine Degreasing
Tire & Wheel Cleaning
Carpet & Upholstery Cleaning
Parts Washing
Industrial:
Manufacturing
Facilities Maintenance
Process Cleaning
Equipment Maintenance
Industrial:
Janitorial: Floors, Walls, Restrooms,
Kitchens, Drains, Carpets
Facilities Maintenance: Interior &
Exterior, Pressure Washing, Concrete
Cleaning
Process Cleaning: Ultra-Sonic, Parts
Washing (solvent & water-based)
Equipment Maintenance:
Heavy deposits of asphaltenes were first removed with a
spatula, then SC-EZ-Solv was spray applied and agitated
with a plastic brush to loosen the hydrocarbon build-up.
A 50% solution of SC-1000 Aqueous Cleaner was
used with a pressure washer as a final step in
removing the hydrocarbon soil
Oil spill barriers were cleaned with SC-EZ-Solv and SC-
1000 Aqueous Cleaner. Spray SC-EZ-Solv and agitate with
a brush to loosen the heavy asphaltene deposits.
A 6% solution of SC-1000 Aqueous Cleaner was used as
a final step to remove the hydrocarbon soil and solvent.
Cleaning large pistons from
Wartsila engines in pump
station using SC-Supersolv™
Safety Solvent.
For cleaning petroleum hydrocarbon, SC-1000 Aqueous
Cleaner at a 50% solution was sprayed on and wiped off.
A bath of SC-OmniBrite Acid
is used to clean copper fin
coils. Dwell time will vary
depending on the soil.
For parts washing, SC-1000 Aqueous
Cleaner at a 50% solution is a typical dilution.
SC-1000 Aqueous Cleaner was
used at a 50% solution and allowed
to dwell for 30 minutes to remove
baked on soil.
SC-Aircraft & Metal Cleaner Concentrated is diluted to a
10% solution for routine exterior cleaning
SC-1000 Aqueous Cleaner is diluted to a 5-10% solution for
exterior cleaning of stainless steel passenger trains using a
pressure washer.
To remove acrylic spray paint, apply SC-Graffiti, Tar &
Gum Remover, wipe with a rag, then rinse with a 3-5%
solution of SC-1000 Aqueous Cleaner.
Spray paint will immediately
release from metal surfaces.
After
Brake cleaning machine that was cleaned using a 50/50
blend of SC-Supersolv and SC-1000 Aqueous Cleaner
at a 20% solution.
Municipal buses are pretreated with a 10% solution
of SC-1000 Aqueous Cleaner before going through
the wash tunnel.
When the advertising sign was removed, heavy soil was
cleaned using a 50/50 blend of SC-Supersolv and SC-
1000 Aqueous Cleaner at a 5 - 10% solution.
Tunnel washing with a 2 – 5% solution of
SC-1000 Aqueous Cleaner
Airport runways were cleaned
using a 5% solution of SC-Safe-
T-Solv Concrete Cleaner that
was brushed on and rinsed with
a pressure washer.
We challenge
you to
“Close the circle…
Thank you
Recommended