BUILDING ON A 60-YEAR TRADITION OF INNOVATION, QUALITY AND DELIVERY
About usVictor Machining is the latest addition to the Victor Hydraulics
operation.
Established over 60 years ago, Victor Hydraulics is the principal
manufacturer of hydraulic cylinders in New Zealand, and a key
supplier to the New Zealand, Australian and global markets.
To ensure we remain at the forefront our industry, we are firmly
committed to a programme of continual product and process
improvement. As part of this commitment, we have achieved
a number of international benchmark standards.
We were the first manufacturer in New Zealand to achieve
the stringent John Deere JDS-G223 quality standard, which
champions customer service, design, quality, cost and on-time
delivery. We have also achieved Key supplier status in John
Deere Achieving Excellence Programme, as part of our
decade-long partnership with Waratah.
We are currently the only hydraulic cylinder business in Australasia to achieve ISO 9001 accreditation
for the design, manufacture and supply of hydraulic cylinders.
With a proud health and safety record, we have also achieved AS/NZS 4801 and BS OHSAS 18001
for the management of Occupational Health and Safety for the design, manufacture and supply of
hydraulic cylinders.
As well as significant plant development, we invest strongly in our staff, including multi-discipline
training, health and safety, and professional development. Located in Christchurch, Victor employs
over 80 staff with diverse skill sets across two manufacturing sites.
12 KLONDYKE DRIVE, CHRISTCHURCH 8042
P.O. BOX 16235, CHRISTCHURCH 8441, NEW ZEALAND
PH: +64 3 344 2700 | FAX: +64 3 344 2701
EMAIL: [email protected]
VICTOR.CO.NZ
Tube bending
Contact the Victor team to discuss how we can add value to your business.
INNOVATION | QUALITY | DELIVERY
We believe in setting the benchmark high and then aiming even higher. This enables us to offer a greater range of services and support, while ensuring the same high level of service, and consistency of quality and supply Victor is known for.
With the support of our flagship production facility, we are able to offer additional finishing services. To ensure a superior end product, we can provide a high quality paint finish through the recent installation of an automated paint mixing room, spray booth and drying oven for the electrostatic application of two pot epoxy paint finishes.
Victor is able to offer high precision tube bending to companies looking to outsource their specialist
machining operations. Traditionally, Victor specialised in the design and maufacture of premium hydraulic
cylinders, predominantly for the primary sector. With the addition of a purpose-built machining facillity,
we are now able to respond to high market demand from companies across a range of industries looking
to outsource production requirements to a trusted name in manufacturing.
Specialist tube bending
The Hanjie HC-380R2 is a high-tech CNC rotary draw tube
bender, utilising complex and sophisticated tooling. With cutting
edge technology, this machine has the capability to deliver a
range of bending solutions – from large scale production runs,
to customised multiple-bend projects. Fully programmable, the
HC-380R2 is ideal for bending tubes and hollow square sections
for a range of applications and sectors.
Our highly trained team is also able to process multiple bends
and differing planes, and produce severe bends with high quality
requirements. With an advanced operating system, the HC-380R2
also provides the flexibility for difficult tube specifications.
The geometric precision of the process prevents wrinkles and
ovalisation, ensuring a smooth finish. The tooling can also be
reconfigured to meet specific product requirements.
Our ability to deliver high-tech tube bending,
combined with a comprehensive range of
component and specialist machining services
enable us to support a number of sectors and
applications.
This includes aerospace, agriculture, construction,
container handling, power generation, general
engineering, forestry, marine, materials handling,
mining, transportation, oil and gas, and waste
management.
Our cutting edge technology is supported by
highly trained and experienced machinists, as well
as an expert in-house design and engineering team.
Working alongside your product and development
team, we can build an understanding of key areas
of performance and how these can be significantly
improved through the development of technology.
With full in-house analytical capacity, we can
provide 3D modelling, finite element analysis,
mathematical CAD and CAM utilising GibbsCAM
software, and stress and fatigue life predictions.
In addition, we specialise in mechanical product
design and analysis, and product documentation –
including purchase specifications and maintenance
specifications.
Machining services
From quality processing of specialist components,
to the design and production of a complete
customised solution for your business, we can
work with your team at a level of input that suits
your supply chain.
T +64 3 344 2700 E [email protected] | VICTOR.CO.NZ
Capability
At Victor, we’re setting the industry standard
through innovative design and technology, internationally
recognised quality and customised service delivery.
The HC-380R2 rotary draw tube bender offers a range
of tube bending solutions.
This state-of-the-art machinery is 4-axis CNC controlled.
This enables feeding, rotation, bending and bend-head
horizontal movement with a bend accuracy of +/-0.05
degrees.
Two-stack bending allows for two different bend radii
to be integrated into the same workpiece.
The PC-based control also supports 3D simulation
software to ensure complete design control, accurate
bending and minimal waste.
Bending angle: maximum 200 degrees
Draw bending radius: maximum 150mm
Bending length With mandrel: 2m Without mandrel: unlimited
The HC-380R2 is able to accommodate various
materials, including steel, stainless steel, aluminium
and superalloys.
Bending of mild steel tubes up to 38mm diameter and 2mm wall thickness
Bending of stainless steel tubes up to 32mm diameter and 1.8mm wall thickness
Bending of mild steel squares up to 32mm and 1.8mm section
With the support of our flagship production facility, we are able to offer additional finishing services. To ensure a superior end product, we can provide a high quality paint finish through the recent installation of an automated paint mixing room, spray booth and drying oven for the electrostatic application of two pot epoxy paint finishes.
Victor is able to offer high precision tube bending to companies looking to outsource their specialist
machining operations. Traditionally, Victor specialised in the design and maufacture of premium hydraulic
cylinders, predominantly for the primary sector. With the addition of a purpose-built machining facillity,
we are now able to respond to high market demand from companies across a range of industries looking
to outsource production requirements to a trusted name in manufacturing.
Specialist tube bending
The Hanjie HC-380R2 is a high-tech CNC rotary draw tube
bender, utilising complex and sophisticated tooling. With cutting
edge technology, this machine has the capability to deliver a
range of bending solutions – from large scale production runs,
to customised multiple-bend projects. Fully programmable, the
HC-380R2 is ideal for bending tubes and hollow square sections
for a range of applications and sectors.
Our highly trained team is also able to process multiple bends
and differing planes, and produce severe bends with high quality
requirements. With an advanced operating system, the HC-380R2
also provides the flexibility for difficult tube specifications.
The geometric precision of the process prevents wrinkles and
ovalisation, ensuring a smooth finish. The tooling can also be
reconfigured to meet specific product requirements.
Our ability to deliver high-tech tube bending,
combined with a comprehensive range of
component and specialist machining services
enable us to support a number of sectors and
applications.
This includes aerospace, agriculture, construction,
container handling, power generation, general
engineering, forestry, marine, materials handling,
mining, transportation, oil and gas, and waste
management.
Our cutting edge technology is supported by
highly trained and experienced machinists, as well
as an expert in-house design and engineering team.
Working alongside your product and development
team, we can build an understanding of key areas
of performance and how these can be significantly
improved through the development of technology.
With full in-house analytical capacity, we can
provide 3D modelling, finite element analysis,
mathematical CAD and CAM utilising GibbsCAM
software, and stress and fatigue life predictions.
In addition, we specialise in mechanical product
design and analysis, and product documentation –
including purchase specifications and maintenance
specifications.
Machining services
From quality processing of specialist components,
to the design and production of a complete
customised solution for your business, we can
work with your team at a level of input that suits
your supply chain.
T +64 3 344 2700 E [email protected] | VICTOR.CO.NZ
Capability
At Victor, we’re setting the industry standard
through innovative design and technology, internationally
recognised quality and customised service delivery.
The HC-380R2 rotary draw tube bender offers a range
of tube bending solutions.
This state-of-the-art machinery is 4-axis CNC controlled.
This enables feeding, rotation, bending and bend-head
horizontal movement with a bend accuracy of +/-0.05
degrees.
Two-stack bending allows for two different bend radii
to be integrated into the same workpiece.
The PC-based control also supports 3D simulation
software to ensure complete design control, accurate
bending and minimal waste.
Bending angle: maximum 200 degrees
Draw bending radius: maximum 150mm
Bending length With mandrel: 2m Without mandrel: unlimited
The HC-380R2 is able to accommodate various
materials, including steel, stainless steel, aluminium
and superalloys.
Bending of mild steel tubes up to 38mm diameter and 2mm wall thickness
Bending of stainless steel tubes up to 32mm diameter and 1.8mm wall thickness
Bending of mild steel squares up to 32mm and 1.8mm section
With the support of our flagship production facility, we are able to offer additional finishing services. To ensure a superior end product, we can provide a high quality paint finish through the recent installation of an automated paint mixing room, spray booth and drying oven for the electrostatic application of two pot epoxy paint finishes.
Victor is able to offer high precision tube bending to companies looking to outsource their specialist
machining operations. Traditionally, Victor specialised in the design and maufacture of premium hydraulic
cylinders, predominantly for the primary sector. With the addition of a purpose-built machining facillity,
we are now able to respond to high market demand from companies across a range of industries looking
to outsource production requirements to a trusted name in manufacturing.
Specialist tube bending
The Hanjie HC-380R2 is a high-tech CNC rotary draw tube
bender, utilising complex and sophisticated tooling. With cutting
edge technology, this machine has the capability to deliver a
range of bending solutions – from large scale production runs,
to customised multiple-bend projects. Fully programmable, the
HC-380R2 is ideal for bending tubes and hollow square sections
for a range of applications and sectors.
Our highly trained team is also able to process multiple bends
and differing planes, and produce severe bends with high quality
requirements. With an advanced operating system, the HC-380R2
also provides the flexibility for difficult tube specifications.
The geometric precision of the process prevents wrinkles and
ovalisation, ensuring a smooth finish. The tooling can also be
reconfigured to meet specific product requirements.
Our ability to deliver high-tech tube bending,
combined with a comprehensive range of
component and specialist machining services
enable us to support a number of sectors and
applications.
This includes aerospace, agriculture, construction,
container handling, power generation, general
engineering, forestry, marine, materials handling,
mining, transportation, oil and gas, and waste
management.
Our cutting edge technology is supported by
highly trained and experienced machinists, as well
as an expert in-house design and engineering team.
Working alongside your product and development
team, we can build an understanding of key areas
of performance and how these can be significantly
improved through the development of technology.
With full in-house analytical capacity, we can
provide 3D modelling, finite element analysis,
mathematical CAD and CAM utilising GibbsCAM
software, and stress and fatigue life predictions.
In addition, we specialise in mechanical product
design and analysis, and product documentation –
including purchase specifications and maintenance
specifications.
Machining services
From quality processing of specialist components,
to the design and production of a complete
customised solution for your business, we can
work with your team at a level of input that suits
your supply chain.
T +64 3 344 2700 E [email protected] | VICTOR.CO.NZ
Capability
At Victor, we’re setting the industry standard
through innovative design and technology, internationally
recognised quality and customised service delivery.
The HC-380R2 rotary draw tube bender offers a range
of tube bending solutions.
This state-of-the-art machinery is 4-axis CNC controlled.
This enables feeding, rotation, bending and bend-head
horizontal movement with a bend accuracy of +/-0.05
degrees.
Two-stack bending allows for two different bend radii
to be integrated into the same workpiece.
The PC-based control also supports 3D simulation
software to ensure complete design control, accurate
bending and minimal waste.
Bending angle: maximum 200 degrees
Draw bending radius: maximum 150mm
Bending length With mandrel: 2m Without mandrel: unlimited
The HC-380R2 is able to accommodate various
materials, including steel, stainless steel, aluminium
and superalloys.
Bending of mild steel tubes up to 38mm diameter and 2mm wall thickness
Bending of stainless steel tubes up to 32mm diameter and 1.8mm wall thickness
Bending of mild steel squares up to 32mm and 1.8mm section
BUILDING ON A 60-YEAR TRADITION OF INNOVATION, QUALITY AND DELIVERY
About usVictor Machining is the latest addition to the Victor Hydraulics
operation.
Established over 60 years ago, Victor Hydraulics is the principal
manufacturer of hydraulic cylinders in New Zealand, and a key
supplier to the New Zealand, Australian and global markets.
To ensure we remain at the forefront our industry, we are firmly
committed to a programme of continual product and process
improvement. As part of this commitment, we have achieved
a number of international benchmark standards.
We were the first manufacturer in New Zealand to achieve
the stringent John Deere JDS-G223 quality standard, which
champions customer service, design, quality, cost and on-time
delivery. We have also achieved Key supplier status in John
Deere Achieving Excellence Programme, as part of our
decade-long partnership with Waratah.
We are currently the only hydraulic cylinder business in Australasia to achieve ISO 9001 accreditation
for the design, manufacture and supply of hydraulic cylinders.
With a proud health and safety record, we have also achieved AS/NZS 4801 and BS OHSAS 18001
for the management of Occupational Health and Safety for the design, manufacture and supply of
hydraulic cylinders.
As well as significant plant development, we invest strongly in our staff, including multi-discipline
training, health and safety, and professional development. Located in Christchurch, Victor employs
over 80 staff with diverse skill sets across two manufacturing sites.
12 KLONDYKE DRIVE, CHRISTCHURCH 8042
P.O. BOX 16235, CHRISTCHURCH 8441, NEW ZEALAND
PH: +64 3 344 2700 | FAX: +64 3 344 2701
EMAIL: [email protected]
VICTOR.CO.NZ
Tube bending
Contact the Victor team to discuss how we can add value to your business.
INNOVATION | QUALITY | DELIVERY
We believe in setting the benchmark high and then aiming even higher. This enables us to offer a greater range of services and support, while ensuring the same high level of service, and consistency of quality and supply Victor is known for.
BUILDING ON A 60-YEAR TRADITION OF INNOVATION, QUALITY AND DELIVERY
About usVictor Machining is the latest addition to the Victor Hydraulics
operation.
Established over 60 years ago, Victor Hydraulics is the principal
manufacturer of hydraulic cylinders in New Zealand, and a key
supplier to the New Zealand, Australian and global markets.
To ensure we remain at the forefront our industry, we are firmly
committed to a programme of continual product and process
improvement. As part of this commitment, we have achieved
a number of international benchmark standards.
We were the first manufacturer in New Zealand to achieve
the stringent John Deere JDS-G223 quality standard, which
champions customer service, design, quality, cost and on-time
delivery. We have also achieved Key supplier status in John
Deere Achieving Excellence Programme, as part of our
decade-long partnership with Waratah.
We are currently the only hydraulic cylinder business in Australasia to achieve ISO 9001 accreditation
for the design, manufacture and supply of hydraulic cylinders.
With a proud health and safety record, we have also achieved AS/NZS 4801 and BS OHSAS 18001
for the management of Occupational Health and Safety for the design, manufacture and supply of
hydraulic cylinders.
As well as significant plant development, we invest strongly in our staff, including multi-discipline
training, health and safety, and professional development. Located in Christchurch, Victor employs
over 80 staff with diverse skill sets across two manufacturing sites.
12 KLONDYKE DRIVE, CHRISTCHURCH 8042
P.O. BOX 16235, CHRISTCHURCH 8441, NEW ZEALAND
PH: +64 3 344 2700 | FAX: +64 3 344 2701
EMAIL: [email protected]
VICTOR.CO.NZ
Tube bending
Contact the Victor team to discuss how we can add value to your business.
INNOVATION | QUALITY | DELIVERY
We believe in setting the benchmark high and then aiming even higher. This enables us to offer a greater range of services and support, while ensuring the same high level of service, and consistency of quality and supply Victor is known for.