TRUCKS
CIFA_TS_GB_0711_rev04
SPECIFICATION
TRUCKS SPECIFICATION
Page intentionally left empty
TRUCK-MOUNTED CONCRETE PUMP
INFO FOR ALL TRUCKS
All trucks equipped with an engine electrical managed must have the electronic control and related electric cables suitable for the external manual command.
The trucks delivered to CIFA must have the features listed in this manual.
Important
The trucks must respect the manufactures specification depending on the desti-nation country and type of equipment installed.
TRUCKS SPECIFICATION
TRUCKS SPECIFICATION
Page intentionally left empty
TRUCK-MOUNTED CONCRETE PUMP
ASTRAq TRUCK SPECIFICATIONS
Mod. Chassis WB mm Axel front weight Kg
Axel rear weight Kg mod.PA Technical
weight Kg
Astra HD 8 4x2 4200 8000 12000 K20L 18000
Astra HD 8 4x2 4600 8000 12000 KZR24 18000
Astra HD 8 6x4 3500/3800 + 1350 8000 19000 KZR24 26000Astra HD 8 6x4 4100+1350 8000 19000 K2 26000Astra HD 8 6x4 4100+1350 8000 19000 K31L 26000Astra HD 8 6x4 4100+1350 8000 19000 K35L 26000Astra HD 8 6x4 4500+1350 8000 26000 K36* 33000
Astra HD 8 6x4 4500+1450 8000 26000 K38L* 33000
* Only for area extra CE
Astra HD 8 8x4 1900+2350+1450 8000+8000 19000 K31L 32000
Astra HD 8 8x4 1900+2350+1450 8000+8000 19000 K36 32000
Astra HD 8 8x4 1900+2350+1450 8000+8000 19000 K35L 32000
Astra HD 8 8x4 1900+2850+1450 8000+8000 19000 K38L 32000
Astra HD 8 8x4 1900+2600/2850+1450 8000+8000 19000 K41L 32000
Astra HD 8 8x4 1900+4100+1450 9000+9000 32000 K48 * 48000
Astra HD 8 8x4 1900+4100+1450 9000+9000 32000 K52L* 48000
Astra HD 8 10x4 1900+4100+1450+1400 9000+9000 32000+12000 K58L * 54000
* Consider for K48 - K52L - K58L you need road permission
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
q P.T.O. SPECIFICATIONSPTO Model
Model PAENGINE PTO GEAR BOX PTO
Version PA with PTO Multipower rapp.1,29 flange din120 ZF NH1-C rapp.0,91/1,09Version PA HPG with PTO NMV rapp.1,55 IVECO code CCM 10819 ZF NH1-C rapp.0,91/1,09
q CHASSIS SPECIFICATIONS- Short Cabin- 2 flashing light on the top of the cabin- Acustic Horne on truck reverse motion- Cable eletric for PTO (Astra code 029)- Not possible OMSI with electronic gear box
ASTRA
q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440
HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480
TRUCK-MOUNTED CONCRETE PUMP
IVECOq TRUCK SPECIFICATIONS
Mod. Chassis WB mm Axel front weight Kg
Axel rear weight Kg mod.PA Technical
weight Kg
Euro cargo. 4x2 4185 7500 12000 K20L 18000
Trakker 4x2 4200 7500 12000 K20L 18000
Trakker 4x2 4500 8000 12000 KZR24 18000
Trakker 6x4 3500/3820+1380 8000 19000 KZR24 26000Trakker 6x4 4200+1380 8000 19000 K2 26000Trakker 6x4 4200+1380 8000 19000 K31L 26000Trakker 6x4 4200+1380 8000 19000 K35L 26000Trakker 6x4 4500+1380 8000 19000 K36 26000Trakker 6x4 4500+1380 8000 26000 K38L * 33000
* Only for area extra CE
Trakker 8x4 1875+2375+1380 8000+8000 19000 K31L 32000
Trakker 8x4 1875+2375+1380 8000+8000 19000 K36 32000
Trakker 8x4 1875+2375+1380 8000+8000 19000 K35L 32000
Trakker 8x4 1875+2875+1380 8000+8000 19000 K38L 32000
Trakker 8x4 1875+2875+1380 8000+8000 19000 K41L 32000
Trakker 8x4 1875+3945+1380 9000+9000 26000 K48 * 44000
Trakker 8x4 1875+3945+1380 9000+9000 26000 K52L * 44000
Trakker 10x4 1875+3145+1380+1400 9000+9000 26000+10000 K52L * 54000Trakker 10x4 1875+4125+1380+1400 9000+9000 26000+12000 K58L * 54000
* Consider for K48 - K52L - K58L you need road permission
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
q P.T.O. SPECIFICATIONSPTO Model
Model PAENGINE PTO GEAR BOX PTO
Version PA with PTO Multipower rapp.1,29 flange din120 ZF NH1-C rapp.0,91/1,09Version PA HPG with PTO NMV rapp.1,55 IVECO code CCM 10819 ZF NH1-C rapp.0,91/1,09
q CHASSIS SPECIFICATIONS- Short Cabin- 2 flashing light on the top of the cabin- Acustic Horne on truck reverse motion- Not possible OMSI with electronic gear box- For chassis 4 and 5 axle we ask for low silence behind 2°axle
IVECO
q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440
HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480
TRUCK-MOUNTED CONCRETE PUMP
MERCEDESq TRUCK SPECIFICATIONS
Mod. Chassis WB mm Axel front weight Kg
Axel rear weight Kg mod.PA Technical
weight Kg
Actros 4x2 4200 7500 12000 K20L 18000
Actros 4x2 4500 7500 12000 KZR 24 18000
Actros 6x4 3600/3900+1350 7500 19000 KZR 24 26000Actros 6x4 4200+1350 7500 19000 K2 26000Actros 6x4 4200+1350 7500 19000 K31L 26000Actros 6x4 4200+1350 7500 19000 K35L 26000Actros 6x4 4500+1350 7500 19000 K36 26000Actros 6x4 4500+1350 7500 26000 K38L* 33000
* Only for area extra CE
Actros 8x4 1700+2500+1350 7500+7500 19000 K35L 32000
Actros 8x4 1700+2500+1350 7500+7500 19000 K31L 32000
Actros 8x4 1700+2800+1350 7500+7500 19000 K38L 32000
Actros 8x4 1700+2800/3200+1350 8000+8000 19000 K41L 32000
Actros 32.44 8x4 1700+3700+1350 8000+8000 19000 K45H 32000
Actros 8x4 1700+4200/4400+1350 9000+9000 26000 K48 * 44000
Actros 8x4 1700+4200+1350 9000+9000 26000 K52L * 44000
Actros 10x4 1700+2800+1350+1450 9000+9000 26000+9000 K52L * 54000Actros 10x4 2020+3980+1350+1350 9000+9000 26000+12000 K58L * 54000
* Consider for K48 - K52L - K58L you need road permission.
Note for K45H: in order to allow a total weight < 32 ton the truck chessis shall weight less than 10.5 ton.
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
q P.T.O. SPECIFICATIONSPTO Model
Model PAENGINE PTO GEAR BOX PTO
Version PA with PTO PTO NMV 200 Cod. M.B. N 56 rapp.1,48 flange Din 120
Gear box PTO Cod. M.B. NH2
q CHASSIS SPECIFICATIONS- Short Cabin - Engine Air filter MB code M97- 2 flashing light on the top of the cabin - Controller PSM MB code EM8 EM9- Acustic Horne on truck reverse motion - Not possible OMSI with electronic gear box- For HPG pumping Unit engine power 450 Hp - For K20L min engine power 280 Hp- Silence type MB code KKH7 (after 2° axle) NO Vertical
MERCEDES
q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440
HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480
TRUCK-MOUNTED CONCRETE PUMP
MANq TRUCK SPECIFICATIONS
Mod. Chassis WB mm Axel front weight Kg
Axel rear weight Kg mod.PA Technical
weight Kg
Man TGS 4x2 4200 7100 11500 K20L 18000
Man TGS 4x2 4500 7500 12000 KZR24 18000
Man TGS 6x4 3600/3900+1400 7500 19000 KZR24 26000Man TGS 6x4 4200+1400 7500 19000 K35 26000Man TGS 6x4 4200+1400 7500 19000 K2X 26000Man TGS 6x4 4200+1400 7500 19000 K31L 26000Man TGS 6x4 4200+1400 7500 19000 K35L 26000Man TGS 6x4 4500+1400 7500 19000 K36 26000Man TGS 6x4 4500+1400 7500 26000 K38L* 33000
* Only for area extra CE
Man TGS 8x4 1795+2505+1400 7500+7500 19000 K31L 32000
Man TGS 8x4 1795+2505+1400 7500+7500 19000 K35L 32000
Man TGS 8x4 1795+2980+1400 7500+7500 19000 K38L 32000
Man TGS 8x4 1795+2980/3205+1400 8000+8000 19000 K41L 32000
Man TGS 32.440 BB 1795+3505+1400 8000+8000 19000 K45H 32000
Man TGS 8x4 1795+4105+1400 9000+9000 26000 K48 * 42000
Man TGS 8x4 1795+4105+1400 9000+9000 26000 K52L * 44000
* Consider for K48 - K52L you need road permission
Note for K45H: in order to allow a total weight < 32 ton the truck chessis shall weight less than 10.5 ton.
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
q P.T.O. SPECIFICATIONSPTO Model
Model PAENGINE PTO GEAR BOX PTO
Version PA with PTO NMV 221 rapp.1,55 MAN code 125CMM
ZF NH1-C rapp.0,91/1,09 MAN code 122QHM
q CHASSIS SPECIFICATIONS- Short Cabin - Lowered bellows on last axle MAN code ZW003M
KSW262CN- 2 flashing light on the top of the cabin - ECU KSM - MAN code 203ER- Acustic Horne on truck reverse motion - Engine start-stop external control MAN code 280HLM- Silence to shift between 2/3 axle - NO vertical - Integral air filter Cod.MAN 201AR- Not possible OMSI with electronic gear box
MAN
q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440
HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480
TRUCK-MOUNTED CONCRETE PUMP
RENAULTq TRUCK SPECIFICATIONS
Mod. Chassis WB mm Axel front weight Kg
Axel rear weight Kg mod.PA Technical
weight Kg
Midlum 4x2 4100 6300 10900 K20L 18000
Kerax 4x2 4500 7500 12000 KZR24 18000
Kerax 6x4 3495/3845+1375 7500 19000 KZR24 26000Kerax 6x4 4195+1375 7500 19000 K2 26000Kerax 6x4 4195+1375 7500 19000 K31 26000Kerax 6x4 4195+1375 7500 19000 K35L 26000Kerax 6x4 4495+1375 7500 19000 K36 26000
Kerax 8x4 2040+2305+1370 7500+7500 19000 K36 32000
Kerax 8x4 2040+2305+1370 7500+7500 19000 K35L 32000
Kerax 8x4 2040+2305+1370 7500+7500 19000 K31L 32000
Kerax 8x4 2040+3005+1370 7500+7500 19000 K38L 32000
Kerax 8x4 2040+2455/3005+1370 8000+8000 19000 K41L 32000
Kerax 8x4 2040+3955+1370 9000+9000 26000 K48 * 44000
Kerax 8x4 2040+3955+1370 9000+9000 26000 K52L * 44000
* Consider for K48 - K52L you need road permission
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
q P.T.O. SPECIFICATIONSPTO Model
Model PAENGINE PTO GEAR BOX PTO
Version PA with PTO NMV 221 rapp.1,55 flange Din 150 PTO ZF 81Z1C rapp.0,92/1,09
q CHASSIS SPECIFICATIONS- Short Cabin- 2 flashing light on the top of the cabin- Acustic Horne on truck reverse motion
- ECU BBM Predisposition for bodybilding- Not possible OMSI with electronic gear box- Modification Air filter and silence behind 2°axle.Note see: “info product” see body builder info-predisposition movement SCR and Air filter on www.Renault-truck.com
RENAULT
q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440
HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480
TRUCK-MOUNTED CONCRETE PUMP
DAFq TRUCK SPECIFICATIONS
Mod. Chassis WB mm Axel front weight Kg
Axel rear weight Kg mod.PA Technical
weight Kg
Daf CF 4x2 4200 7500 11500 K20L 18000
Daf CF 4x2 4500 7500 12000 KZR24 18000
Daf CF 6x4 3850+1400 7500 19000 KZR24 26000Daf CF 6x4 4300+1400 7500 19000 K2X 26000Daf CF 6x4 4300+1400 7500 19000 K31L 26000Daf CF 6x4 4300+1400 7500 19000 K35L 26000Daf CF 6x4 4850+1400 7500 19000 K36 26000
Daf CF 8x4 2050+2300+1400 7500+7500 19000 K31L 32000
Daf CF 8x4 2050+2300+1400 7500+7500 19000 K36 32000
Daf CF 8x4 2050+2300+1400 7500+7500 19000 K35L 32000
Daf CF 8x4 2050+2850+1400 7500+7500 19000 K38L 32000
Daf CF 8x4 2050+2550/2950+1400 8000+8000 19000 K41L 32000
Daf CF 8x4 2050+4100+1400 9000+9000 26000 K48 * 44000
Daf CF 8x4 2050+4100+1400 9000+9000 26000 K52L* 44000
* Consider for K48 - K52L you need road permission
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
DAFq P.T.O. SPECIFICATIONS
PTO Model
Model PAENGINE PTO GEAR BOX PTO
Version PA with PTO Engine PTO rapp.1,20 flange DIN 120 ZF NH1-C rapp.0,91/1,09Version PA HPG with PTO NMV 221 rapp.1,55 flange 150 ZF NH1-C rapp.0,91/1,09
q CHASSIS SPECIFICATIONS- Short Cabin - Air filter integrated on the cabin- 2 flashing light on the top of the cabin - Not possible OMSI with electronic gear box- Acustic Horne on truck reverse motion- Modification silence behind 2°axle- ECU BBM + software for external control engine
q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440
HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480
TRUCK-MOUNTED CONCRETE PUMP
VOLVOq TRUCK SPECIFICATIONS
Mod. Chassis WB mm Axel front weight Kg
Axel rear weight Kg mod.PA Technical
weight Kg
Volvo FLH4x2 4100 7100 11500 K20L 18000
Volvo FM4x2 4600 7500 12000 KZR24 18000
Volvo FM 6x4 3500/3900+1370 7500 19000 KZR24 26000Volvo FM 6x4 4300+1370 7500 19000 K2 26000Volvo FM 6x4 4300+1370 7500 19000 K31L 26000Volvo FM 6x4 4300+1370 7500 19000 K35L 26000Volvo FM 6x4 4600+1370 7500 19000 K36 26000
Volvo FM8x4 1995+2305+1370 7500+7500 19000 K31L 32000
Volvo FM8x4 1995+2305+1370 7500+7500 19000 K36 32000
Volvo FM8x4 1995+2305+1370 7500+7500 19000 K35L 32000
Volvo FM8x4 1995+2605+1370 7500+7500 19000 K38L 32000
Volvo FM8x4 1995+2605/2905+1370 8000+8000 19000 K41L 32000
Volvo FM8x4 1995+4105+1370 9000+9000 26000 K48 * 44000
Volvo FM8x4 1995+4105+1370 9000+9000 32000 K52L* 44000
Volvo FM10x4 1995+4005+1370+1400 9000+9000 32000+10000 K58L* 54000
* Consider for K48 - K52L - K58L you need road permission The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
q P.T.O. SPECIFICATIONSPTO Model
Model PAENGINE PTO GEAR BOX PTO
Note: Truck configuration only with coupler OMSI
q CHASSIS SPECIFICATIONS- Short Cabin - Air filter integrated on the cabin- 2 flashing light on the top of the cabin - Not possible OMSI with electronic gear box- Acustic Horne on truck reverse motion- ECU BBM Predisposition for bodybilding- For chassis 4 and 5 axle we ask for low silence behind 2°axle
VOLVO
q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440
HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480
TRUCK-MOUNTED CONCRETE PUMP
q TRUCK SPECIFICATIONS
Mod. Chassis WB mm Axel front weight Kg
Axel rear weight Kg mod.PA
Technical weight
Kg
Serie P/R 4x2 4100 7100 11500 K20L 18000
Serie P/R 4x2 4500 7500 12000 KZR24 18000
Serie P/R 6x4 3500/3900+1445 7500 19000 KZR24 26000Serie P/R 6x4 4100+1445 7500 19000 K2 26000Serie P/R 6x4 4100+1445 7500 19000 K31L 26000Serie P/R 6x4 4100+1445 7500 19000 K35L 26000Serie P/R 6x4 4500+1445 7500 19000 K36 26000
Serie P/R 8x4 1940+2160+1445 7500+7500 19000 K36 32000
Serie P/R 8x4 1940+2160+1445 7500+7500 19000 K35L 32000
Serie P/R 8x4 1940+2160+1445 7500+7500 19000 K31L 32000
Serie P/R 8x4 1940+2960+1445 7500+7500 19000 K38L 32000
Serie P/R 8x4 1940+2560/2960+1445 8000+8000 19000 K41L 32000
Serie P/R 8x4 1940+3960/4160+1445 9000+9000 26000 K48 * 44000
Serie P/R 8x4 1940+3960/4160+1445 9000+9000 32000 K52L * 44000
Serie P/R 10x4 1940+2560+1445+1305 9000+9000 30000+9000 K52L* 54000Serie CB 10x4 1940+4160+1445+1305 9000+9000 30000+9000 K58L* 54000
* Consider for K48 - K52L - K58L you need road permission
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
SCANIA
TRUCK-MOUNTED CONCRETE PUMP
SCANIAq P.T.O. SPECIFICATIONS
PTO Model
Model PAENGINE PTO GEAR BOX PTO
Note: Truck configuration only with coupler OMSI
q CHASSIS SPECIFICATIONS- Short Cabin-CP14 - Air filter integrated on the cabin- 2 flashing light on the top of the cabin - program system for central unit SOPS fonic wheel 6 teeth- Acustic Horne on truck reverse motion - ECU BWS Predisposition for bodybilder- Not possible OMSI with electronic gear box- For chassis 4 and 5 axle we ask for low silence behind 2°axle
q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440
HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480
MAGNUM
INFO FOR ALL TRUCKS
All trucks equipped with an engine electrical managed must have the electronic control and related electric cables suitable for the external manual command.
The trucks delivered to CIFA must have the features listed in this manual.
All veicols with festures different from the following specification should cause delay on delivery and the charge for the modification needed.
Important
The trucks must respect the manufactures specification depending on the destination country and type of equipment installed.
TRUCKS SPECIFICATION
TRUCKS SPECIFICATION
Page intentionally left empty
MAGNUM
q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front
weight KgAxel rear weight Kg model Technical
weight Kg
HD8 - 6x4 3500+1450 8000 13000+13000 80MK24 33000
HD8 - 8x4 1900+2350+1450 8000+8000 13000+13000 80MK20 40000
HD8 - 8x4 1900+2350+1450 8000+8000 13000+13000 80MK24 40000
HD8 - 8x4 1900+2350+1450 8000+8000 13000+13000 80MK28L 40000
HD8 - 8x4 1900+2350+1450 8000+8000 13000+13000 115MK24 40000
HD8 - 8x4 1900+2350+1450 8000+8000 13000+13000 115MK28L 40000
HD8 - 8x4 1900+2350+1450 8000+8000 13000+13000 115MK32L 40000
ASTRA
MAGNUM
q MOTORIZATION SPECIFICATIONSModel PTO
Model Magnum
ENGINE PTO GEAR BOX PTO DOUBLE
GEAR BOX PTO SINGLE
ENGINE MOTOR
MULTIPOWERratio 1-1.29 900Nm FLANGE DIN 120-8 holes
ZF.N221/10 rapp.1.36-1.62FLANGE DIN 100-6 Holes andNL/1-C ratio 0.91-1.09 overturned version low direction on the right.
ZF NH1-C ratio 0.91-1.09
RH PTO PB607L-GPT405 l lRH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l
q CHASSIS SPECIFICATIONS- SHORT CABIN - ELECTRIC CABLE PTO (Astra code 029)- 2 FLASHING LIGHT ON THE TOP OF THE CABIN -GEAR BOX PTO DOUBLE WITH FLANGE IN LOW- ACUSTIC HORNE ON TRUCK REVERSE MOTION- PREDISPOSITION LATERAL MARKER LIGTH
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
ASTRA
MAGNUM
q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front
weight KgAxel rear weight Kg mod.MA Technical
weight Kg
TRAKKER 6x4 3500+13803820+1380 8000 13000+13000 80MK24 33000
TRAKKER 8x4 1875+2375+1380 8000+8000 13000+13000 80MK20 41000
TRAKKER 8x4 1875+2375+1380 8000+8000 13000+13000 80MK24 41000
TRAKKER 8x4 1875+2375+1380 8000+8000 13000+13000 80MK28L 41000
TRAKKER 8x4 1875+2375+1380 8000+8000 13000+13000 115MK24 41000
TRAKKER 8x4 1875+2375+1380 8000+8000 13000+13000 115MK28L 41000
TRAKKER 8x4 1875+2375+1380 8000+8000 13000+13000 115MK32L 41000
IVECO
MAGNUM
q MOTORIZATION SPECIFICATIONSPTO Model
Model Magnum
ENGINE PTO GEAR BOX PTO DOUBLE
GEAR BOX PTO SINGLE
ENGINEMOTOR
MULTIPOWERratio 1-1.29flange DIN 120-8 holes900Nm
ZF.N221/10 ratio 1.36-1.62flange DIN 100-6 holes andNL/1-C ratio 0.91-1.09 overturned version low direction on the right.
ZF NH1-C ratio 0.91-1.09
RH PTO PB607L-GPT405 l lRH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l
IVECO
q CHASSIS SPECIFICATIONS- SHORT CABIN -GEAR BOX PTO DOUBLE WITH FLANGE IN LOW- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION- LOW VERSION SILENCER 2°/3° AXLE (no Vertical)- PREDISPOSITION LATERAL MARKER LIGTH
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
MAGNUM
q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front
weight KgAxel rear weight Kg model Technical
weight Kg
ACTROS 6x4 3600+1350 8000 13000+13000 80MK24 33000
ACTROS 8x4 1700+2500+13501700+2800+1350 8000+8000 13000+13000 80MK20 41000
ACTROS 8x4 1700+2500+13501700+2800+1350 8000+8000 13000+13000 80MK24 41000
ACTROS 8x4 1700+2500+13501700+2800+1350 8000+8000 13000+13000 80MK28L 41000
ACTROS 8x4 1700+2500+13501700+2800+1350 8000+8000 13000+13000 115MK24 41000
ACTROS 8x4 1700+2500+13501700+2800+1350 8000+8000 13000+13000 115MK28L 41000
ACTROS 8x4 1700+2500+13501700+2800+1350 8000+8000 13000+13000 115MK32L 41000
MERCEDES
MAGNUM
q CHASSIS SPECIFICATIONS- ELASTIC JOINT MB Type N54 - PSM ELECTRONIC GEARBOX (MB code EM 8/9)
- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - PTO version: Movement AD BLU CENTRAL (See Note*)
- ACUSTIC HORNE ON TRUCK REVERSE MOTION - ENGINE AIR FILTER (MB code M97)
- PREDISPOSITION LATERAL MARKER LIGTH - GEAR BOX PTO DOUBLE WITH FLANGE IN HIGH- SHORT CABIN: VERTICAL EXHAUST SILENCE (MB code K68)
- MEDIUM CABIN: EXHAUST SILENCE (2°-3° AXLE) MB code KKH7 - Only 80 MK Model
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
q MOTORIZATION SPECIFICATIONSModel PTO
Model Magnum
ENGINE PTO ENGINE PTO GEAR BOX PTO DOUBLE
GEAR BOX PTO SINGLE
ENGINEMOTORMB-N52-1,15
Flange:DIN 100 6 holes-600Nm
MB-N56-1,48Flange: DIN 120 8 holes-1500Nm
MB-ND7-1,36/1,62 MB-NH2C 1,07/1,29
RH PTO PB607L-GPT405 l l
RH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l
Note * -Movement AD BLU 600 mm towards rear
MERCEDES
MAGNUM
q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front
weight KgAxel rear weight Kg modell Technical
weight Kg
TGS 6x4 3600+14003900+1400 8000 13000+13000 80MK24 33000
TGS 8x4 1795+2505+1400 8000+8000 13000+13000 80MK20 41000
TGS 8x4 1795+2505+1400 8000+8000 13000+13000 80MK24 41000
TGS 8x4 1795+2505+1400 8000+8000 13000+13000 80MK28L 41000
TGS 8x4 1795+2505+1400 8000+8000 13000+13000 115MK24 41000
TGS 8x4 1795+2505+1400 8000+8000 13000+13000 115MK28L 41000
TGS 8x4 1795+2505+1400 8000+8000 13000+13000 115MK32L 41000
MAN
MAGNUM
q MOTORIZATION SPECIFICATIONSModel PTO
Model Magnum
ENGINE PTO GEAR BOX PTO DOUBLE
GEAR BOX PTO SINGLE ENGINE
MOTORPTO MAN Cod. 120KHratio 1,23 - 870Nm
ZF 221/10B -R. 1,35/1,62 flange 100 -6 holes. Cod. MAN 122 IP + ZF NL1C cod. MAN 122 OV
ZF NH1C MAN code 122 QHM
RH PTO PB607L-GPT405 l lRH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l
q CHASSIS SPECIFICATIONS- SHORT CABIN START/STOP ESTERNAL CONTROL (Code 280 HLM)- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - SILENCER TO SHIFT BETWEEN 2nd and 3rd AXLE
(See drawing)- ACUSTIC HORNE ON TRUCK REVERSE MOTION - ENGINE AIR FILTER (Code 201 ASS)- PREDISPOSITION LATERAL MARKER LIGTH GEAR BOX PTO DOUBLE WITH FLANGE IN LOW- LOWERED BELLOWS ON 4th AXLE (Code KSW 262 CN)- KSM ELECTRONIC GEARBOX (code 203 ER)
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
MAN
MAGNUM
RENAULTq TRUCK SPECIFICATIONS
Mod. Chassis WB mm Axel front weight Kg
Axel rear weight Kg model Technical
weight Kg
KERAX 6x4 3495 + 13703845 + 1370 8000 13000+13000 80MK24 33000
KERAX 8x4 2040+2305+13702040+2455+1370 8000+8000 13000+13000 80MK20 41000
KERAX 8x4 2040+2305+13702040+2455+1370 8000+8000 13000+13000 80MK24 41000
KERAX 8x4 2040+2305+13702040+2455+1370 8000+8000 13000+13000 80MK28L 41000
KERAX 8x4 2040+2305+13702040+2455+1370 8000+8000 13000+13000 115MK24 41000
KERAX 8x4 2040+2305+13702040+2455+1370 8000+8000 13000+13000 115MK28L 41000
KERAX 8x4 2040+2305+13702040+2455+1370 8000+8000 13000+13000 115MK32L 41000
MAGNUM
q MOTORIZATION SPECIFICATIONSModel PTO
Model Magnum
ENGINE PTO GEAR BOX PTO DOUBLE
GEAR BOX PTO SINGLE
ENGINEMOTOR
PAM 100 ratio 1-1,08 flange DIN1006 holes 800Nm
ZF 221/10B ratio 1,35/1,62Flange 100 6 holes + 81Z2-C ratio 0,77/0,92 overturned version low direction on the right.
81Z1C - Ratio 0.92-1.09
RH PTO PB607L-GPT405 l lRH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l
q CHASSIS SPECIFICATIONS- SHORT CABIN - ECU BBM PREDISPOSITION FOR BODYBUILDER- 2 FLASHING LIGHT ON THE TOP OF THE CABIN -GEAR BOX PTO DOUBLE WITH FLANGE IN LOW- ACUSTIC HORNE ON TRUCK REVERSE MOTION- PREDISPOSITION LATERAL MARKER LIGTH- MODIFY EXHAUST SYSTEM AFTER 2nd AXLE AND ENGINE AIR FILTER (See Note “ MOVEMENT PREDISPOSITION SCR AND ENGINE AIR FILTER” ON WEB SITE - www.Renault-truck.com)
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
RENAULT
MAGNUM
DAF
q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front
weight KgAxel rear weight Kg model Technical
weight Kg
CF 85 FAT 6x4 3850+1400 8000 13000+13000 80MK24 33000
CF 85 FAD 8x4 2050+2300+1400 8000+8000 13000+13000 80MK20 41000
CF 85 FAD 8x4 2050+2300+1400 8000+8000 13000+13000 80MK24 41000
CF 85 FAD 8x4 2050+2300+1400 8000+8000 13000+13000 80MK28L 41000
CF 85 FAD 8x4 2050+2300+1400 8000+8000 13000+13000 115MK24 41000
CF 85 FAD 8x4 2050+2300+1400 8000+8000 13000+13000 115MK28L 41000
CF 85 FAD 8x4 2050+2300+1400 8000+8000 13000+13000 115MK32L 41000
MAGNUM
q MOTORIZATION SPECIFICATIONSModel PTO
Model Magnum
ENGINE PTO GEAR BOX PTO DOUBLE
GEAR BOX PTO SINGLE
ENGINEMOTOR
ENGINE PTOFlange DIN 120 8 holesratio 1:1,20 800Nm
ZF N.221/10B ratio 1,36-162Flange DIN 100 6 holes + ZF NL 1C ratio 0,91-1,09 overturned version low direction on the right.
ZF NH1C ratio 0.91-1.09
RH PTO PB607L-GPT405 l lRH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l
q CHASSIS SPECIFICATIONS- SHORT CABIN - MOVEMENT EXHAUST SYSTEM AFTER 2nd AXLE
(8x4) - See Bulletin CIFA Mktg 01/2008.- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - MOVEMENT EXHAUST SYSTEM 500 mm TOWARDS
THE REAR (6x4) - See Bulletin CIFA Mktg 01/2008.- ACUSTIC HORNE ON TRUCK REVERSE MOTION ECU-BBM PREDISPOSITION FOR BODYBUILDER- PREDISPOSITION LATERAL MARKER LIGTH SOFTWARE BBM+SC FOR EXTERNAL CONTROL
ENGINE (Cod.DAF 1690720 SELCO 0797)- ENGINE AIR FILTER INTEGRATED IN THE CABIN -GEAR BOX PTO DOUBLE WITH FLANGE IN LOW
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
DAF
MAGNUM
VOLVOq TRUCK SPECIFICATIONS
Mod. Chassis WB mm Axel front weight Kg
Axel rear weight Kg model Technical
weight Kg
FM 6x4 3700+13703900+1370 8000 13000+13000 80MK24 33000
FM 8x4 1995+2305+13701995+2605+1370 8000+8000 13000+13000 80MK20 41000
FM 8x4 1995+2305+13701995+2605+1370 8000+8000 13000+13000 80MK24 41000
FM 8x4 1995+2305+13701995+2605+1370 8000+8000 13000+13000 80MK28L 41000
FM 8x4 1995+2305+13701995+2605+1370 8000+8000 13000+13000 115MK24 41000
FM 8x4 1995+2305+13701995+2605+1370 8000+8000 13000+13000 115MK28L 41000
FM 8x4 1995+2305+13701995+2605+1370 8000+8000 13000+13000 115MK32L 41000
MAGNUM
q MOTORIZATION SPECIFICATIONSModel PTO
Model Magnum
ENGINE PTO ENGINE PTO GEAR BOX PTO DOUBLE
GEAR BOX PTO SINGLE
ENGINEMOTOR
PTER 1400 ratio 1-1,26flange SAE 1400 4 holes EPTT 650NM
PTER 1400 ratio 1-1,26flange SAE 1400 4 holesEPTT 1000Nm
PTRD D1 rapp. 1-1,30/1,62flangia SAE and enclo-sed heat exchanger
PTRD-D ratio 1.08-1.12
RH PTO PB607L-GPT405 l lRH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l
q CHASSIS SPECIFICATIONS- SHORT CABIN - 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION - FOR MODIFICATION EXHAUST SYSTEM AFTER
2nd AXLE See “SERVICE INFO” on VOLVO WEB SITE.- PREDISPOSITION LATERAL MARKER LIGTH - ENGINE AIR FILTER INTEGRATED IN THE CABIN- ECU BBM PREDISPOSITION FOR BODYBUILDER -GEAR BOX PTO DOUBLE WITH FLANGE IN HIGH
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
VOLVO
MAGNUM
SCANIAq TRUCK SPECIFICATIONS
Mod. Chassis WB mm Axel front weight Kg
Axel rear weight Kg model Technical
weight Kg
SERIE P.R 6x4 3700+14453900+1445 8000 13000+13000 80MK24 33000
SERIE P.R 8x4 1940+2360+14451940+2560+1445 8000+8000 13000+13000 80MK20 41000
SERIE P.R 8x4 1940+2360+14451940+2560+1445 8000+8000 13000+13000 80MK24 41000
SERIE P.R 8x4 1940+2360+14451940+2560+1445 8000+8000 13000+13000 80MK28L 41000
SERIE P.R 8x4 1940+2360+14451940+2560+1445 8000+8000 13000+13000 115MK24 41000
SERIE P.R 8x4 1940+2360+14451940+2560+1445 8000+8000 13000+13000 115MK28L 41000
SERIE P.R 8x4 1940+2360+14451940+2560+1445 8000+8000 13000+13000 115MK32L 41000
MAGNUM
q MOTORIZATION SPECIFICATIONSModel PTO
Model Magnum
ENGINE PTO GEAR BOX PTO DOUBLE
GEAR BOX PTO SINGLE
ENGINEMOTOREK 740 ratio 1:1
Flange SAE 1400 4 holes 2000Nm
EG 661 ratio 1,28:1,58Flange SAE 1400
EG 652 ratio 0,82:1,03only Gear GRS 0905
RH PTO PB607L-GPT405 l lRH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l
q CHASSIS SPECIFICATIONS- SHORT CABIN CP 14 or CP 16 - MEDIUM CABIN CG 16 (Contact CIFA Technical Dep.)- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - MEDIUM CABIN CR 16 (Not Available)- ACUSTIC HORNE ON TRUCK REVERSE MOTION - ENGINE AIR FILTER INTEGRATED IN THE CABIN- PREDISPOSITION LATERAL MARKER LIGTH - ECU BWS predisposition for bodybuilder- FOR MODIFICATION EXHAUST SYSTEM AND BATTERIE BOX AFTER 2nd AXLE
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
SCANIA
TRUCK MIXER
TRUCKS SPECIFICATION
INFO FOR ALL TRUCKS
All trucks equipped with an engine electrical managed must have the electro-nic control and related electric cables suitable for the external manual com-mand.
The trucks delivered to CIFA must have the features listed in this manual.
All trucks with festures different from the following specification should cause delay on delivery and the charge for the modification needed.
Important
The trucks must respect the manufactures specification depending on the destination country and type of equipment installed.
Page intentionally left empty
TRUCK MIXER
ASTRA
q MOTORIZATION SPECIFICATIONSModel PTO
Model TRUCK MIXER
ENGINE PTOENGINE MOTOR
MULTIPOWERratio 1,29 900NmFLANGE DIN 120-8 holes
SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l
q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front
weight KgAxel rear weight Kg modello Technical
weight KgHD8 - 6x4 3500+1450 8000 19000 SL7/SLA7 33000HD8 - 6x4 3500+1450 8000 26000 SL8/SLA8 33000HD8 - 6x4 3800+1450 9000 32000 SL9 40000
HD8 - 8x4 4250+1450 7500+7500 26000 SL9/SLA9 41000HD8 - 8x4 4250+1450 8000+8000 26000 SL10/SLA10 41000HD8 - 8x4 4750+1450 8000+8000 32000 SL12/SLA12 48000HD8 - 8x4 4750+1450 9000+9000 32000 HD12+* 48000
* only for area extra CE
q CHASSIS SPECIFICATIONS- SHORT CABIN- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION- ELECTRIC PREDISPOSITION FOR PTO CON.ASTRA 029
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCK MIXER
q MOTORIZATION SPECIFICATIONSModel PTO
Model TRUCK MIXER
ENGINE PTOENGINE MOTOR
MULTIPOWERrate 1,29 900NmFLANGE DIN 120-8 holes
SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l
q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front
weight KgAxel rear weight Kg model Technical
weight KgTRAKKER 6x4 3500+1380 7500 19000 SL7/SLA7 33000TRAKKER 6x4 3500/3820+1380 7500 26000 SL8/SLA8 33000TRAKKER 6x4 3820+1380 9000 32000 SL9 40000
TRAKKER 8x4 4250+1380 7500+7500 26000 SL9/SLA9 41000TRAKKER 8x4 4250+1380 8000+8000 26000 SL10/SLA10 41000TRAKKER 8x4 5020+1380 8000+8000 29200 SL12 45000TRAKKER 8x4 5020+1380 8000+8000 29200 SLA12 45000TRAKKER 8x4 5020+1380 8000+8000 29200 HD12+* 45000
* only for area extra CE
q CHASSIS SPECIFICATIONS- SHORT CABIN- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
IVECO
TRUCK MIXER
MERCEDES
q MOTORIZATION SPECIFICATIONSModel PTO
Model TRUCK MIXER
ENGINE PTOENGINE MOTOR
PTO MB N52 rate 1,15 600NmFlange DIN 100 6 holes
SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l
q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front
weight KgAxel rear weight Kg model Technical
weight KgAXOR ACTROS
6x4 3600+1350 7500 19000 SL7/SLA7 33000
AXOR ACTROS 6x4 3600+1350 7500 26000 SL8/SLA8 33000
ACTROS 6X4 3900+1350 9000 32000 SL9 40000
AXOR ACTROS 8x4 4200+1350 7500+7500 26000 SL9/SLA9 41000
AXOR ACTROS 8x4 4200+1350 8000+8000 26000 SL10/SLA10 41000
AXOR ACTROS 8x4 4500+1350 8000+8000 32000 SL12 48000
AXOR ACTROS 8x4 5100+1350 8000+8000 32000 SLA12 48000
AXOR ACTROS 8x4 5100+1350 9000+9000 32000 HD12+* 48000
* only for area extra CE
q CHASSIS SPECIFICATIONS- SHORT CABIN - ECU PSM (MB code EM8/9)- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION- ELASTIC JOINT (MB code N54) Only SL Model
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCK MIXER
MAN
q MOTORIZATION SPECIFICATIONSModel PTO
Model TRUCK MIXER
ENGINE PTOENGINE MOTOR
PTO MAN COD. 120KHrate 1,23 870NmFlange DIN 100 6 holes
SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l
q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front
weight KgAxel rear weight Kg model Technical
weight KgMAN TGS
6x4 3600+1400 7500 19000 SL7/SLA7 33000
MAN TGS6x4 3600+1400 7500 26000 SL8/SLA8 33000
MAN TGS 6X4 3900+1400 9000 32000 SL9 40000
MAN TGS8x4 4300+1400 7500+7500 26000 SL9/SLA9 41000
MAN TGS8x4 4300+1400 8000+8000 26000 SL10/SLA10 41000
MAN TGS8x4 4775+1400 8000+8000 32000 SL12/SLA12 48000
MAN TGS8x4 4775+1400 9000+9000 32000 HD12+* 48000
* only for area extra CE
q CHASSIS SPECIFICATIONS- SHORT CABIN- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION- ECU KSM (MAN code 203ER)
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCK MIXER
RENAULT
q MOTORIZATION SPECIFICATIONSModel PTO
Model TRUCK MIXER
ENGINE PTOENGINE MOTOR
PTO RENAULT PAM 100 - rate 1,08 800NmFlange DIN 100
SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l
q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front
weight KgAxel rear weight Kg model technical
weight KgKERAX
6x4 3495+1375 7500 19000 SL7/SLA7 33000
KERAX6x4 3495+1375 7500 26000 SL8/SLA8 33000
KERAX6x4 3850+1375 9000 32000 SL9 40000
KERAX8x4 4345+1370 7500+7500 26000 SL9/SLA9 41000
KERAX8x4 4345+1370 8000+8000 26000 SL10/SLA10 41000
KERAX8x4 4495+1370 8000+8000 32000 SL12 48000
KERAX8x4 5045+1370 8000+8000 32000 SLA12 48000
KERAX8x4 5045+1370 8000+8000 32000 HD12+* 48000
* only for area extra CE
q CHASSIS SPECIFICATIONS- SHORT CABIN - ECU BBM PREDISPOSITION FOR BODYBUILDER- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCK MIXER
DAF
q MOTORIZATION SPECIFICATIONSModel PTO
Model TRUCK MIXER
ENGINE PTO
ENGINE MOTOR
ENGINE PTORatio 1. 1,2 800NmFlange DIN 120 8 holes - anticlockwise rotation
SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l
q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front
weight KgAxel rear weight Kg model Technical
weight KgCF 6x4 3350/3850+1400 7500 19000 SL7/SLA7 33000CF 6x4 3350/3850+1400 7500 26000 SL8/SLA8 33000CF 6x4 3850+1400 9000 32000 SL9 40000
CF 8x4 4350+1400 7500+7500 26000 SL9/SLA9 41000CF 8x4 4350+1400 8000+8000 26000 SL10/SLA10 41000CF 8x4 4600+1400 8000+8000 32000 SL12 48000CF 8x4 5000+1400 8000+8000 32000 SLA12 48000CF 8x4 5000+1400 9000+9000 32000 HD12+* 48000
* only for area extra CE
q CHASSIS SPECIFICATIONS- SHORT CABIN - ECU BBM PREDISPOSITION FOR BODYBUILDER- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCK MIXER
VOLVO
q MOTORIZATION SPECIFICATIONSModel PTO
Model TRUCK MIXER
ENGINE PTOENGINE MOTOR
PTO VOLVO PTER 1400rate 1,26 Flange SAE 1400EPTT 650NM
SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l
q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front
weight KgAxel rear weight Kg model Technical
weight KgFM 6x4 3400/3700+1370 7500 19000 SL7/SLA7 33000FM 6x4 3400/3700+1370 7500 26000 SL8/SLA8 33000FM 6x4 3900+1370 9000 32000 SL9 40000
FM 8x4 4300+1370 7500+7500 26000 SL9/SLA9 41000FM 8x4 4300+1370 8000+8000 26000 SL10/SLA10 41000FM 8x4 4600+1370 8000+8000 32000 SL12 48000FM 8x4 4900+1370 8000+8000 32000 SLA12 48000FM 8x4 5100+1370 9000+9000 32000 HD12+* 48000
* only for area extra CE
q CHASSIS SPECIFICATIONS- SHORT CABIN - ECU BBM PREDISPOSITION FOR BODYBUILDER- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCK MIXER
SCANIA
q MOTORIZATION SPECIFICATIONSModel PTO
Model TRUCK MIXER
ENGINE PTOENGINE MOTOR
PTO SCANIA EK 740rate 1,1 2000NmFlange SAE 1400
SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l
q TRUCK SPECIFICATIONS
Mod. Chassis WB mm Axel front weight Kg
Axel rear weight Kg model Technical
weight KgSERIE P/R 6x4 3500/3700+1445 7500 19000 SL7/SLA7 33000SERIE P/R 6x4 3500+1445 7500 26000 SL8 33000SERIE P/R 6x4 3700+1445 7500 26000 SLA8 33000SERIE P/R 6x4 3900+1445 9000 32000 SL9 40000
SERIE P/R 8x4 4100+1445 8000+8000 26000 SL9/SLA9 41000SERIE P/R 8x4 4300+1445 8000+8000 26000 SL10/SLA10 41000SERIE P/R 8x4 4500+1445 8000+8000 32000 SL12 48000SERIE P/R 8x4 4700+1370 8000+8000 32000 SLA12 48000SERIE P/R 8x4 4700+1370 9000+9000 32000 HD12+* 48000
* only for area extra CE
q CHASSIS SPECIFICATIONS- SHORT CABIN CP14 - FOR SLA8 AND SLA12 ONLY ORIZZONTAL SILEN-
CER- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - ECU BWS PREDISPOSITION FOR BODYBUILDER
- ACUSTIC HORNE ON TRUCK REVERSE MOTION
- FOR CABIN CP16 OR CR16 TO BE VERIFIED BY CIFA TECH NICAL DEP.
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCKS SPECIFICATION
Page intentionally left empty
Cifa S.p.A.via Stati Uniti d’America, 26I - 20030 Senago (Milano)
tel. +39.02.99013.1fax +39.02.9981157
www.cifa.com