30-33RePlant® Surgical Sequence & Drills
Table of Contents
1
2-3
4-9
10
11
14
13
15-17
18-19
20
Page #
RePlant®, RePlus® & ReActiveTM
Implants
Straight Abutment & Ancillary Components
Healing Collars, Transfers,Analogs & Alignment Tools
Procedures for TitaniumFMT / Temporary Abutment
25
21-24
Surgical & ProstheticInstruments
RePlus® & ReActiveTM
Fixture Mount Packaging
Selection Chart for Implant & StraightAbutment Components
Procedures for ContouredAbutments & Lab Alignment Tools
Selection Chart for PartiallyEdentulous Restorations
Abutments for Partially EdentulousRestorations
Screw-Receiving, Ball, GPSTM
Abutments & Components
RePlus® & ReActiveTM SurgicalSequence & Drills
Implant Design & Surface
Implant Dimensions & ProductLabel Description
12
26-29
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:49 Page 1
The bodies of the RePlus® and ReActiveTM implants are tapered evenly from the top to facilitate insertion into an undersized socket insoft bone providing compression that increases initial stability (G. Niznick: Clinical Oral Health 2000 “Achieving Success in Soft Bone”).The RePlant® implant is designed with a straight/tapered profile matching that of the NobelReplace Implant (Nobel Biocare). Mini-threads start 1.0mm below the crest of the bone and extend approximately 2.0 mm before transitioning into double-lead threads to the apex of the implant. The mini-threads, half the depth and pitch of the double-lead body threads, reduce stress in the criticalcrestal bone region, while double-lead threads reduce the number of turns required to seat the implant. Vertical cutting groovesextend halfway up the implant from the apex for self-tapping insertion. All three implants are available with SBM textured surfaceover the entire implant and HA is an option for RePlus® and ReActiveTM.
Mini-threads with Double-lead Threads for Faster Insertion
DoubleLead
Threads
QuadrupleLead Mini-
Threads
Implant Design & Surface
RePlant® duplicates the body designof NobelReplace
0.3mm 0.45mm
0.85mm
Buttress ThreadStandard “V” Thread
0.6mm
ReActiveTM offers greater thread engagement bytapering the inside thread diameter (ID) at 3o while
the outside thread diameter (OD) tapers at 1.5o
3.0 Deg.ID Taper
1.5 Deg.ID Taper
The 1.5o taper to the OD of the RePlus® and ReActiveTM implants
facilitate bone expansion for increased stability.
All three Implant Direct Tri-Lobeimplants have Mini-threads for reduced stress near the crest of
bone, and double-lead threads on the body for 2X faster insertion
1.5 Deg. OD Taper
SBM™ and HA Coated Surface OptionsSBM surface is created by using a Soluble Blast Media of Hydroxylapatite (HA) crystals to create a medium-rough texture. We usethe same vendor for its SBM and HA coated surface treatments as used by Paragon Implant Company from 1992-2000 whenthese studies were conducted.
Animal Studies Bone Response to SBM SurfaceSEM's of Our Surfaces
Mini-threads textured by blasting with SBM™: Blasted with Soluble HA ParticlesHA Coating: High Crystalline 40u layer
RePlus® & ReActiveTM Implants have an HA
SBM Surface 50X
HA Surface 50X
SBM Surface 20X
HA Surface 20X
1
1.5 Deg.OD Taper
1.5 Deg. OD Taper
Standard “V” Thread
RePlus® features threads with the same 1.5o taper to the inside (ID) and outside (OD) thread
diameters for optimum soft bone compression
Brazilian Study* Shows SBM Provides Superior Bone Contact
Mean Percentage of Bone Contact%
80
70
60
50
40
30
20
10
SBM HA TPS Machined
62.7558.89
48.9141.70
LSU Study* Shows SBMProvides Superior Bone Contact%
80
70
60
50
40
30
20
10
SBM HA TPS Machined
63.8
57.6 52.7
36
2
3.7mmD RePlus®3.1mmD Apex
4.2mmD RePlus®3.6mmD Apex
4.3mmD Platform
4.7mmD RePlus®4.1mmD Apex
RePlus® and ReActiveTM Implants
RePlant® Implants
5.0mmD Platform
5.7mmD RePlus®5.1mmD Apex
3.5mmD RePlant®2.6mmD Apex
4.3mmD RePlant®2.7mmD Apex
1mm Unthreaded Collar
3.0mmL
5.8mmL
4.0mmL
Implant Design & Dimensions with NobelReplace Compatible Tri-Lobe Connection
1mm Unthreaded Collar
3.5mmD Platform 4.3mmD Platform 5.0mmD Platform 6.0mmD Platform
M1.8 InternalThread
SBM SurfaceTexture
M2.0 InternalThread
M1.8 InternalThread
M2.0 InternalThread
ImplantLength(13mm)
6.5mmL 6.9mmL
3.5mmD Platform
4.0mmL3.0mmL
SBM SurfaceTexture
6.1mmL
0.3mm Supra-Crestal
ImplantLength(13mm)
6.0mmD RePlant®3.7mmD Apex
5.0mmD RePlant®3.1mmD Apex
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:49 Page 3
Product Labeling: Definitions & Descriptions
4.
3 4.
3
RePlant™ Implant 604313604313
6043
13xxxxxxxxxxxx
SBM™
4
.3 4.3
6043
13xxxxxxxxxxxx
mm
mm
Body
Pla
tform
mm
mm
Body
Pla
tform
4.3mm Diam 13mm
4.3mm Diam
# #
RePla
nt™
RePla
nt™
RePlant® Implant Vial and Cap Label
1) Our products carry the CE mark and fulfill the requirementsof the Medical Device Directive 93/42/EEC
2) Manufacturer Symbol3) Product code or reference number4) Product description5) Use before expiration date (XXXX-XX)6) Gamma sterilization symbol7) Single-use only symbol8) Caution: US law restricts the sale of these devices
by or on the order of a dentist or physician9) Tamper proof symbol
10) Refer to Instructions For Use (IFU)11) Lot number (XXXXXXXXXX)12) Implant body diameter color reference on surgical tray13) Implant prosthetic platform diameter (written and color-coded)14) Non-sterile symbol
3
1
4
5
6
7 11
12
13
8 10
60 = RePlant® SBM43 = 4.3mmD body diameter13 = 13mmL body length
4.3
RePlant Straight Abutment6043-21 6043-21
Length: 1mm
Platform: 4.3mm Diam RePla
nt Stra
ight A
butm
ent
# 604
3-21
xxxxxxxxxxxx
xxxxxxxxxxxx
# 604
3-21
4.3
RePla
nt Stra
ight A
butm
ent
Includes: Dual-Grip Screw, Transfer &
Comfort Cap
™
TM TM
mmPla
tform
mmPla
tform
RePlant® Prosthetic Vial and Cap Label
3
1
4
7
8
14 11
13
13
109
60 = RePlant® prosthetics43 = 4.3mmD platform diameter-21= prosthetic specific code
9
2
2
3
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:49 Page 4
4.3mmDImplant
6.0mmDImplant
5.0mmDImplant
3.5mmDImplant
3.5mmDPlatform
4.3mmDPlatform
5.0mmDPlatform
6.0mmD Platform
Placing Carrier/Transfers & Making Impressions
Carrier/Transfer
Color-coded Titaniumfixture-mount carrier
Align flat to labial forindexing of tri-lobe
Fixture-mount isscrew-retained
Use fixture-mount asclosed tray transfer
Cover Screw
4
RePlant® Two-PieceImplant System Featuring:
• Straight/Tapered body design and dimensions match NobelReplace® Tapered Groovy implant allowing insertion with Nobel Biocare’s drills
• Tri-Lobe color-coded platform is compatible with NobelReplace® abutments
• SBM (Soluble Blast Media) textured surface to top of implant
• Color-coded fixture-mount usable as a transfer and shortened for use as a temporary abutment
• Use of titanium alloy for an increase in strength compared to Nobel Biocare’s Tri-Lobe implants manufactured from CP titanium
RePlant®Packaging
RePlant®
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:50 Page 5
3.5mmD
6.0mmD
Code Diameter Length Platform603508 3.5mmD 8mmL 3.5mmD603510 3.5mmD 10mmL 3.5mmD603511 3.5mmD 11.5mmL 3.5mmD603513 3.5mmD 13mmL 3.5mmD603516 3.5mmD 16mmL 3.5mmD
Code Diameter Length Platform604308 4.3mmD 8mmL 4.3mmD604310 4.3mmD 10mmL 4.3mmD604311 4.3mmD 11.5mmL 4.3mmD604313 4.3mmD 13mmL 4.3mmD604316 4.3mmD 16mmL 4.3mmD
Code Diameter Length Platform605008 5.0mmD 8mmL 5.0mmD605010 5.0mmD 10mmL 5.0mmD605011 5.0mmD 11.5mmL 5.0mmD605013 5.0mmD 13mmL 5.0mmD605016 5.0mmD 16mmL 5.0mmD
Code Diameter Length Platform606008 6.0mmD 8mmL 6.0mmD606010 6.0mmD 10mmL 6.0mmD606011 6.0mmD 11.5mmL 6.0mmD606013 6.0mmD 13mmL 6.0mmD606016 6.0mmD 16mmL 6.0mmD
5
4.3mmD
604310 604313 604316
5.0mmD
605010 605013 605016
606010 606013 606016
604311
605011
606011
RePlant®: Two-Piece Implant
605008
604308
USE REPLANT SURGICAL TRAY OR NOBEL BIOCARE’S TAPERED REPLACE IMPLANT DRILLS FOR INSERTION OF REPLANT IMPLANT
SBM Surface Implants Includes Fixture Mount, Dual-Grip™ Fixation and Cover Screw
603510 603511 603513 603516603508
Code Platform6035-01 3.5mmD6043-01 4.3mmD6050-01 5.0mmD6060-01 6.0mmD
Replacement Surgical Cover Screws
6043-01 6050-01 6060-016035-01
Components include Dual-Grip™ feature for use with1.25mmD Hex Tool or Nobel Unigrip ScrewDriver
606008
RePlant®
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:50 Page 6
Cover Screw
RePlus® Two-Piece Implant System Featuring:
4.7mmDImplant
3.7mmD & 4.2mmD Implant
RePlus® Packaging
3.5mmD Platform
4.3mmDPlatform
5.7mmDImplant
• Tri-Lobe color-coded platform is compatible with NobelReplace® abutments
• Color-coded fixture-mount usable as a transfer and shortened for use as a straight final abutment with snap-on comfort cap
• Surface options: SBM (Soluble Blast Media) or HA-coated
• Platform-switching with RePlant® and NobelReplace abutments
step 1 step 2 step 3 step 4
Fixture-Mount Transfer: Shortened for final abutment with Snap-on Comfort Cap and Transfer
Fixture-MountTransfer
Snap-OnComfort Cap
5.0mmD Platform
6
RePlus®
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:50 Page 7
4.2mmD
4.7mmD
7
RePlus®: Two-Piece Implant
RePlus®
3.7mmD
SBM Code HA Code Diameter Length Platform703708 713708 3.7mmD 8mmL 3.5mmD703710 713710 3.7mmD 10mmL 3.5mmD703711 713711 3.7mmD 11.5mmL 3.5mmD703713 713713 3.7mmD 13mmL 3.5mmD703716 713716 3.7mmD 16mmL 3.5mmD
SBM Code HA Code Diameter Length Platform704208 714208 4.2mmD 8mmL 3.5mmD704210 714210 4.2mmD 10mmL 3.5mmD704211 714211 4.2mmD 11.5mmL 3.5mmD704213 714213 4.2mmD 13mmL 3.5mmD704216 714216 4.2mmD 16mmL 3.5mmD
Includes Fixture Mount with Dual-Grip™ FixationScrew, Cover Screw and Comfort Cap
703710713710
703713713713
703716713716
703708713708
703711713711
704210714210
704213714213
704216714216
704208714208
704211714211
SBM Code HA Code Diameter Length Platform704708 714708 4.7mmD 8mmL 4.3mmD704710 714710 4.7mmD 10mmL 4.3mmD704711 714711 4.7mmD 11.5mmL 4.3mmD704713 714713 4.7mmD 13mmL 4.3mmD704716 714716 4.7mmD 16mmL 4.3mmD
704710714710
704713714713
704716714716
704708714708
704711714711
SBM Code HA Code Diameter Length Platform705708 715708 5.7mmD 8mmL 5.0mmD705710 715710 5.7mmD 10mmL 5.0mmD705711 715711 5.7mmD 11.5mmL 5.0mmD705713 715713 5.7mmD 13mmL 5.0mmD705716 715716 5.7mmD 16mmL 5.0mmD
5.7mmD
705710715710
705713715713
705716715716
705708715708
705711715711
SBM and HA Surface Implants
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:51 Page 8
Cover Screw
ReActiveTM Two-Piece Implant System Featuring: ReActiveTM Packaging
3.5mmD Platform
4.3mmDPlatform
• Tri-Lobe color-coded platform is compatible with NobelReplace® abutments
• Color-coded fixture-mount usable as a transfer and shortened for use as a platform-switching straight final abutment
• Surface options: SBM (Soluble Blast Media) or HA-coated
• Platform-switching with RePlant® and NobelReplace abutments
• Buttress threads with increased thread depthproviding greater surface area for bone attachment and primary implant stability
Fixture-MountTransfer
5.0mmDPlatform
8
ReActiveTM
Placing Carrier/Transfers &Taking Impressions
Color-coded titaniumfixture-mount carrier
Align flat to labial forindexing of tri-lobe
Fixture-mount isscrew retained
Use fixture-mount asclosed tray transfer
step 1 step 2
Fixture-Mount Transfer:Shortened to fabricate
final abutment
5.7mmDImplant
3.7mmD & 4.2mmD Implant
4.7mmDImplant
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:51 Page 9
9
3.7mmD
SBM Code HA Code Diameter Length Platform753708 763708 3.7mmD 8mmL 3.5mmD753710 763710 3.7mmD 10mmL 3.5mmD753711 763711 3.7mmD 11.5mmL 3.5mmD753713 763713 3.7mmD 13mmL 3.5mmD753716 763716 3.7mmD 16mmL 3.5mmD
SBM Code HA Code Diameter Length Platform754208 764208 4.2mmD 8mmL 3.5mmD754210 764210 4.2mmD 10mmL 3.5mmD754211 764211 4.2mmD 11.5mmL 3.5mmD754213 764213 4.2mmD 13mmL 3.5mmD754216 764216 4.2mmD 16mmL 3.5mmD
ReActiveTM: Two-Piece Implant
SBM and HA Surface Implants
ReActiveTM
753710763710
753713763713
753716763716
753708763708
753711763711
4.2mmD
754210764210
754213764213
754216764216
754208764208
754211764211
SBM Code HA Code Diameter Length Platform754708 764708 4.7mmD 8mmL 4.3mmD754710 764710 4.7mmD 10mmL 4.3mmD754711 764711 4.7mmD 11.5mmL 4.3mmD754713 764713 4.7mmD 13mmL 4.3mmD754716 764716 4.7mmD 16mmL 4.3mmD
4.7mmD
754710764710
754713764713
754716764716
754708764708
754711764711
SBM Code HA Code Diameter Length Platform755708 765708 5.7mmD 8mmL 5.0mmD755710 765710 5.7mmD 10mmL 5.0mmD755711 765711 5.7mmD 11.5mmL 5.0mmD755713 765713 5.7mmD 13mmL 5.0mmD755716 765716 5.7mmD 16mmL 5.0mmD
5.7mmD
755710765710
755713765713
755716765716
755708765708
755711765711
Includes Fixture Mount with Dual-Grip™ FixationScrew and Cover Screw
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:51 Page 10
10
The RePlant®, RePlus® and ReActiveTM implants are mounted on color-coded fixture-mounts, designed for use as implant level transfers or shortened to function as abutments. A cover screw is included in each vial. The RePlus® fixture-mount is provided with a snap-on comfort cap.
Fixture-Mount Packaging
All the implants come in a sterile vial
Prepare surgical site withdouble cutting step drill
Insert implant into osteotomy Index fixture-mount flat to labial
Attach abutment using 30Ncm in hardbone & finger pressure in soft bone
Check for occlusal clearanceprior to attaching comfort cap
Test retention & rotate ifnecessary to increase retention
Suture soft tissue aroundcomfort cap
Remove colored section from fixture-mount through groove to createa final straight abutment
Attach fixture-mount to corresponding color-coded implant analog
Remove implant assembly witha fixture-mount drill or ratchet
Each cap is color-coded byplatform diameter of implant
Each label is color-coded withtwo tear-off labels
Drop implant assembly out of vial onto a sterile surface
Remove fixture-mount Remove the holder containingthe cover screw & comfort cap
The flat of the fixture mountaligned the lobe to the labial
Snap-on comfort cap is locatedin the top portion of holder
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:51 Page 11
During implantplacement, indexthe flat of theFixture-Mount
Pour the working castin dental stone withsoft tissue replicationmaterial
Option 2: Stage-One transfer followed by laboratory procedures for abutment preparation and provisionalization
Attach the AngledAbutment to theImplant Analog in theworking cast with a1.25mmD Hex Tool
Block out the top of the Fixture-Mountand make aconventional transfer impression
Attach theCover Screwand submergeimplant
Attach the Fixture-Mount to the ImplantAnalog and seat intothe negative of theimpression
Remove the Fixture-Mount from the working cast with the1.25mmD Hex Tool
Modify angle ofabutment andrefine margins as required
Fabricate the temporary crown
Occlude screwaccess hole andconfirm contour of restoration
Cement theprovisionalrestoration
At Stage-2 surgery,attach the preparedabutment and tighten to 30Ncmwith a Torque Wrench
To establish the optimum angle of the abutment, indexthe flat surface of the Fixture Mount/Transfer eithertoward or away from the desired direction of abutmentangle at the time of implant placement.
Orienting the 15º Angled AbutmentThe flat side of the Fixture Mount/Transfer [Fig. 1] and the angle of the 15° abutment [Fig. 2]are manufactured to align with the outer radius of one of the implant’s three internal lobes.
Option 1: Attaching an Angled Abutment and chairside procedures for preparation
Common procedures for abutment placement, margin finessing, impressing and placement of restoration
Remove theHealing Collar with a1.25mmDHex Tool
Attach provisionalrestorationand cementonto thepreparedabutment
Attach the abutmentwith the1.25mmDHex Tool
Tighten to 30Ncm witha TorqueWrench
Make animpressionfollowingstandardclinicalprocedures
Mark the requiredmodifications to achieveappropriate clearance
Finesse themargins witha high-speedbur andcopious irrigationprior to finalimpressing
Attach the abutment to the correspondingImplant Analog.Reduce the abutmentto achieve appropriate clearance
Follow standard laboratory procedures, fabricate thefinal restoration and cementonto the prepared abutment
Fig. 2 The two-piece, 15º AngledAbutment consists of an angled
body and a fixation screw Fig. 1Fixture Mount/Transfer
Detach the abutmentwith the1.25mmDHex Tool
Clinical & Laboratory Procedures for Contoured Abutments
11
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:51 Page 12
12
7. Seat denture over Titanium TemporaryAbutment to confirm passive placement. Checkocclusion with opposing arch. Occlude screwaccess hole with cotton pellet.
1. Unthread the healing collars from the implantusing appropriate driver. The top of the implantsare exposed.
10. Optional step: Attach implant analogs tobase of denture. Pour a soft tissue working castto prevent engagement with undercuts.Articulate with opposing arch.
6. Use acrylic trimmer to drill holes throughdenture corresponding to marked positions.
3. Place the fixation screw through theabutment and tighten in place using the appropriate driver. The torque value of the fixation screw is determined by clinician.Standard torque value is 30Ncm.
12. Attach prosthesis to implants and tighten inplace using the appropriate tooling. Occludescrew access holes with material of choice.
2. Use the prepared implant fixture mount as atemporary abutment (reshaping of tri-lobe atapex is essential) or select the TitaniumTemporary Abutment matching the implantprosthetic platform.
11. Remove denture and trim the prosthesis toallow access for patient cleaning. The prosthesisis now a fixed restoration, removable by clinician only.
5. Mark position of Titanium TemporaryAbutments on under surface of denture withindelible marker.
4. Confirm there is less than 40 degrees of relative divergence between abutments to besplinted together.
8. Use autopolymerizing acrylic or similar lightcure material to attach prosthesis to TitaniumTemporary Abutments. Allow to set prior toremoval from mouth.
9. Remove prosthesis from the mouth, flip over to expose tissue side. Use additional autopolymerizing resin to fill in any voidsaround the processed abutments.
Clinical Procedures for Titanium Temporary Abutment/Fixture-Mount
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:51 Page 13
13
Contoured Abutments with 0, 30, 60 or 90 Degree Tri-Lobe Offset
Implant with tri-lobe aligned to labial. Rotate transfer and seat mating tri-lobes.
Make transfer impression using vinylpolysiloxane material.
Evaluate rotational position of tri-lobefor selection of straight and angled contoured abutments
1. Tri-Lobe aligned perpendicular tolabial. (0 degrees offset)
1. Tri-Lobe aligned 30 degrees counter-clockwise to line perpendicular to labial.
1. Tri-Lobe aligned 60 degrees counter-clockwise to line perpendicular to labial.
1. Tri-Lobe aligned 90 degrees counter-clockwise to lineperpendicular to labial.
2. Dimple of Alignment Tool isperpendicular to labial: 0 degree offset of implant tri-lobe.
2. Dimple on the tool is 1 facet (30 degrees) counter-clockwise toline perpendicular to labial.
2. Dimple on the tool is 2 facets (60 degrees) counter-clockwise toline perpendicular to labial.
2. Dimple on the tool is 3 facets (90 degrees) counter-clockwise toline perpendicular to labial.
3. Use 0 degree tri-lobe offsetContoured Abutment when tool isinserted as above.
3. Use 30 degree tri-lobe offsetContoured Abutment when tool isinserted as above.
3. Use 60 degree tri-lobe offsetContoured Abutment when tool isinserted as above.
3. Use 90 degree tri-lobe offsetContoured Abutment when tool isinserted as above.
Attach transfer to matching coloredimplant analog. Insert transfer andpour impression.
0 degrees offset 30 degrees offset 60 degrees offset 90 degrees offset
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:51 Page 14
Tri-lobe Selection Chart
6035-31C6035-32C
6035-316035-32
6043-31C6043-32C
6043-316043-32
6035-30L 6043-30L
6035-21 6035-22 6035-23 6043-21 6043-22 6043-23
30/60/90°
6035-52-306035-52-606035-52-90
30/60/90°
6035-32-306035-32-606035-32-90
6035-51-15C6035-52-15C
6043-51-15C6043-52-15C
6043-516043-52
6035-516035-52
6035-51-08C6035-52-08C
6035-40†6035-41
†6035-49†6035-46 6035-47 6043-40†6043-41
†6043-46
†non-engaging
3037
3037-02
6043-05
Carrier/Transfer
14
3037-26
4.3mmD Platform3.5mmD Platform
6035-72 6035-74 6043-72
6035-61 6035-62 6035-64 6043-61 6043-62 6043-646035-64-15 6035-64-30
6035-94-15 6035-94-30 6035-91 6035-92 6035-93 6035-94 6035-95 6043-91 6043-92 6043-93 6043-94
6035-136035-016035-15
6043-136043-016043-15
6035-13N6035-15N
6035-086035-056043-15N6043-13N6035-06
Cover Screws, Healing Collars,Implant Transfers & Analogs
Straight Abutments, Comfort Caps, Transfers & Analogs
Lab Abutments & Engaging & Non-Engaging
Abutments
Ball, GPS™ & Screw-Receiving
Overdenture Abutments
Straight & AngledContoured Abutments
30/60/90°
6043-32-306043-32-606043-32-90
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:52 Page 15
15
6050-31C6050-32C
6050-316050-32
6050-30L 6060-30L
6060-316060-32
6.0mmD Platform5.0mmD Platform
6050-21 6050-22 6050-23 6060-21 6060-22 6060-23
30/60/90°
6050-52-306050-52-606050-52-90
30/60/90°
6050-32-306050-32-606050-32-90
6060-516060-52
6050-51-15C6050-52-15C
6050-516050-52
6043-51-15C6043-52-15C
6043-516043-52
6050-51-08C6050-52-08C
6043-51-08C6043-52-08C
†6043-496043-47 6050-40†6050-41
†6050-49†6050-46 6050-47 †6060-49†6060-46 6060-47
30653057-02 3065-023047-02
3047-26 3057-26 3065-26
6050-066050-05
Carrier/Transfer
6060-06
Carrier/Transfer
6043-06
Carrier/Transfer
6060-05
6043-74 6050-72 6050-74 6060-72 6060-74
6050-61 6050-62 6050-64 6060-61 6060-62 6060-646043-64-15 6043-64-30 6050-64-15 6050-64-30
6043-94-15 6043-94-30 6050-94-15 6050-94-306043-95 6050-91 6050-92 6050-93 6050-94 6050-95
6050-136050-15
6050-01 6060-136060-15
6060-016050-13N6050-15N
6060-13N6060-15N
6050-08 6060-086043-08
3047 3057
30/60/90°
6043-52-306043-52-606043-52-90
30/60/90°6060-32-306060-32-606060-32-90
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:54 Page 16
Code Platform Replacement Screw - 2ea6035-05 3.5mmD 1000-286043-05 4.3mmD 1000-276050-05 5.0mmD 1000-276060-05 6.0mmD 1000-27
Closed-Tray Implant Transfers
Healing Collars
Narrow Healing Collars
Open-Tray Implant Transfers
Implant Analogs
Lab Abutment Alignment Tools
16
Healing Collars, Transfers, Analogs & Alignment Tools
Code Platform6035-06 3.5mmD6043-06 4.3mmD6050-06 5.0mmD6060-06 6.0mmD 6060-066050-066043-066035-06
Code Width Length Platform6035-13 4.6mmD 3mmL 3.5mmD6035-15 4.6mmD 5mmL 3.5mmD6043-13 5.6mmD 3mmL 4.3mmD6043-15 5.6mmD 5mmL 4.3mmD6050-13 6.1mmD 3mmL 5.0mmD6050-15 6.1mmD 5mmL 5.0mmD6060-13 6.6mmD 3mmL 6.0mmD6060-15 6.6mmD 5mmL 6.0mmD
6035-13
6035-15
6043-13
6043-15
6050-13
6050-15
6060-13
6060-15
Code Width Length Platform6035-13N 3.5mmD 3mmL 3.5mmD6035-15N 3.5mmD 5mmL 3.5mmD6043-13N 4.3mmD 3mmL 4.3mmD6043-15N 4.3mmD 5mmL 4.3mmD6050-13N 5.0mmD 3mmL 5.0mmD6050-15N 5.0mmD 5mmL 5.0mmD6060-13N 6.0mmD 3mmL 6.0mmD6060-15N 6.0mmD 5mmL 6.0mmD
6035-13N
6035-15N
6043-13N
6043-15N
6050-13N
6050-15N
6060-13N
6060-15N
Code Platform6035-07 3.5mmD6043-07 4.3mmD6050-07 5.0mmD6060-07 6.0mmD 6043-076035-07 6060-076050-07
6035-051000-271000-28 6043-05 6050-05 6060-05
Code Platform Replacement Screw - 2ea6035-08 3.5mmD 1000-126043-08 4.3mmD 1000-116050-08 5.0mmD 1000-116060-08 6.0mmD 1000-11 6035-08 6043-08 6050-08 6060-081000-111000-12
Includes Dual-Grip™ Fixation Screw
Components include Dual-Grip™ feature for use with1.25mmD Hex Tool or Nobel Unigrip ScrewDriver
Includes Long Fixation Screw[Requires 1.25mmD Hex Tool]
Components include Dual-Grip™ feature for use with1.25mmD Hex Tool or Nobel Unigrip ScrewDriver
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:55 Page 17
Straight Abutment Analogs Includes Castable Coping
Code Abutment Width3037 3.7mmD3047 4.7mmD3057 5.7mmD3065 6.5mmD
Straight Abutment Comfort Caps
Straight Abutments
Straight Abutment Transfers
Code Platform Collar Heights Use Analog Replacement Screw6035-21 3.5mmD 1mm 3037 1000-236035-22 3.5mmD 2mm 3037 1000-236035-23 3.5mmD 3mm 3037 1000-236043-21 4.3mmD 1mm 3047 1000-226043-22 4.3mmD 2mm 3047 1000-226043-23 4.3mmD 3mm 3047 1000-226050-21 5.0mmD 1mm 3057 1000-226050-22 5.0mmD 2mm 3057 1000-226050-23 5.0mmD 3mm 3057 1000-226060-21 6.0mmD 1mm 3065 1000-226060-22 6.0mmD 2mm 3065 1000-226060-23 6.0mmD 3mm 3065 1000-22
17
Straight Abutments, Snap-on Transfers & Lab Analogs
Includes Transfer, Comfort Cap &Fixation Screw with Dual-Grip™
Code Abutment Width3037-26 3.7mmD3047-26 4.7mmD3057-26 5.7mmD3065-26 6.5mmD
Code Abutment Width3037-02 3.7mmD3047-02 4.7mmD3057-02 5.7mmD3065-02 6.5mmD 3037-02
3037
Code Abutment Width3037-28 3.7mmD3047-28 4.7mmD3057-28 5.7mmD3065-28 6.5mmD
Straight Abutment Castable Copings
3047-28 3057-28 3065-283037-28
3047-02 3057-02 3065-02
3047-26 3057-26 3065-263037-26
6043-23 6060-236050-23
6035-22 6043-22 6060-226050-22
6035-21 6043-21 6060-216050-21
6035-23
306530573047
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:56 Page 18
Includes Dual-Grip™ Fixation Screw
Code Platform Angulation Collar Heights Replacement Screw6050-31C 5.0mmD 0° 1mm 1000-226050-32C 5.0mmD 0° 2mm 1000-226050-51-08C 5.0mmD 8° 1mm 1000-226050-52-08C 5.0mmD 8° 2mm 1000-226050-51-15C 5.0mmD 15° 1mm 1000-226050-52-15C 5.0mmD 15° 2mm 1000-226050-30CB 5.0mmD - .5mm 1000-22
Code Platform Angulation Collar Heights Replacement Screw6035-31C 3.5mmD 0° 1mm 1000-236035-32C 3.5mmD 0° 2mm 1000-236035-51-08C 3.5mmD 8° 1mm 1000-236035-52-08C 3.5mmD 8° 2mm 1000-236035-51-15C 3.5mmD 15° 1mm 1000-236035-52-15C 3.5mmD 15° 2mm 1000-236035-30CB 3.5mmD - .5mm 1000-23
Code Platform Angulation Collar Heights Replacement Screw6043-31C 4.3mmD 0° 1mm 1000-226043-32C 4.3mmD 0° 2mm 1000-226043-51-08C 4.3mmD 8° 1mm 1000-226043-52-08C 4.3mmD 8° 2mm 1000-226043-51-15C 4.3mmD 15° 1mm 1000-226043-52-15C 4.3mmD 15° 2mm 1000-226043-30CB 4.3mmD - .5mm 1000-22
Includes Dual-Grip™ Fixation Screw
Code Platform Collar Heights Replacement Screw6035-31 3.5mmD 1mm 1000-236035-32 3.5mmD 2mm 1000-236043-31 4.3mmD 1mm 1000-226043-32 4.3mmD 2mm 1000-226050-31 5.0mmD 1mm 1000-226050-32 5.0mmD 2mm 1000-226060-31 6.0mmD 1mm 1000-226060-32 6.0mmD 2mm 1000-22
Straight Titanium Contoured Abutments
18
Straight & Angled Contoured, Titanium & Zirconia Abutments
6043-31 6050-31 6060-316035-31
6043-32 6050-32 6060-326035-32
Code Platform Collar Heights Replacement Screw6035-51 3.5mmD .75mm 1000-236035-52 3.5mmD 2mm 1000-236043-51 4.3mmD .75mm 1000-226043-52 4.3mmD 2mm 1000-226050-51 5.0mmD .75mm 1000-226050-52 5.0mmD 2mm 1000-226060-51 6.0mmD .75mm 1000-226060-52 6.0mmD 2mm 1000-22
15º Angled Titanium Contoured Abutments
6043-51 6050-51 6060-516035-51
6043-52 6050-52 6060-526035-52
Includes Dual-Grip™ Fixation Screw0°, 8° & 15° Zirconia Contoured Abutments
6035-52-15C6035-32C
6043-51-15C6043-31C
6050-51-08C 6050-51-15C6050-31C
6050-52-08C 6050-52-15C
6035-30CB
6043-30CB
6050-30CB
6035-31C 6035-51-08C 6035-51-15C
6043-32C 6043-52-08C 6043-52-15C
6050-32C
6043-51-08C
6035-52-08C
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:56 Page 19
Includes Dual-Grip™ Fixation Screw
Includes Dual-Grip™ Fixation Screw
Includes Dual-Grip™ Fixation Screw
19
Straight Full Contour Abutments
Code Collar Heights Platform Replacement Screw6035-30L - 3.5mmD 1000-236043-30L - 4.3mmD 1000-226050-30L - 5.0mmD 1000-226060-30L - 6.0mmD 1000-22 6035-30L 6043-30L 6050-30L 6060-30L
Angled, Contoured & Lab Titanium Abutments
Code Collar Heights Platform Replacement Screw6035-32-30 2mm 3.5mmD 1000-236035-32-60 2mm 3.5mmD 1000-236035-32-90 2mm 3.5mmD 1000-236043-32-30 2mm 4.3mmD 1000-226043-32-60 2mm 4.3mmD 1000-226043-32-90 2mm 4.3mmD 1000-226050-32-30 2mm 5.0mmD 1000-226050-32-60 2mm 5.0mmD 1000-226050-32-90 2mm 5.0mmD 1000-226060-32-30 2mm 6.0mmD 1000-226060-32-60 2mm 6.0mmD 1000-226060-32-90 2mm 6.0mmD 1000-22
Angled Contoured Abutments with 30, 60 & 90 Degree offset Tri-Lobe
Straight Contoured Abutments with 30, 60 & 90 Degree offset Tri-Lobe
Code Collar Heights Platform Replacement Screw6035-52-30 2mm 3.5mmD 1000-236035-52-60 2mm 3.5mmD 1000-236035-52-90 2mm 3.5mmD 1000-236043-52-30 2mm 4.3mmD 1000-226043-52-60 2mm 4.3mmD 1000-226043-52-90 2mm 4.3mmD 1000-226050-52-30 2mm 5.0mmD 1000-226050-52-60 2mm 5.0mmD 1000-226050-52-90 2mm 5.0mmD 1000-22
6035-52-30 6043-52-30 6050-52-30
6035-52-90 6043-52-90 6050-52-90
6050-52-606043-52-606035-52-60
6035-32-30
6035-32-60
6035-32-90
6060-32-30
6060-32-60
6043-32-90
6043-32-30
6043-32-60
6050-32-90
6050-32-30
6050-32-60
6060-32-90
Code Platform1000-23 3.5mmD only (short)1000-28 3.5mmD only (long)1000-22 4.3, 5.0 and 6.0mmD (short)1000-27 4.3, 5.0 and 6.0mmD (long)
Replacement Fixation Screws
1000-281000-23 1000-271000-22
Components include Dual-Grip™ feature for use with1.25mmD Hex Tool or Nobel Unigrip ScrewDriver
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:57 Page 20
Includes Dual-Grip™ Fixation Screw
Includes Dual-Grip™ Fixation Screw
Includes Dual-Grip™ Fixation Screw
Includes Dual-Grip™ Fixation Screw
Titanium Non-Engaging Temporary Abutments
Plastic Non-Engaging Castable Abutments
Engaging & Non-Engaging Abutments
Code Collar Heights Platform Replacement Screw6035-46 - 3.5mmD 1000-236043-46 - 4.3mmD 1000-226050-46 - 5.0mmD 1000-226060-46 - 6.0mmD 1000-22
Code Collar Heights Platform Replacement Screw6035-49 - 3.5mmD 1000-236043-49 - 4.3mmD 1000-226050-49 - 5.0mmD 1000-226060-49 - 6.0mmD 1000-22
Code Collar Heights Platform Replacement Screw6035-40 1mm 3.5mmD 1000-236043-40 1mm 4.3mmD 1000-226050-40 1mm 5.0mmD 1000-22
Gold Engaging Cast-to Abutments
6035-40 6043-40 6050-40
Code Collar Heights Platform Replacement Screw6035-41 1mm 3.5mmD 1000-236043-41 1mm 4.3mmD 1000-226050-41 1mm 5.0mmD 1000-22
Gold Non-Engaging Cast-to Abutments
6035-41
6035-46 6043-46 6050-46 6060-46
Includes Dual-Grip™ Fixation ScrewPlastic Engaging Temporary Abutments
Code Collar Heights Platform Replacement Screw6035-47 - 3.5mmD 1000-286043-47 - 4.3mmD 1000-276050-47 - 5.0mmD 1000-276060-47 - 6.0mmD 1000-27
20
6035-47 6043-47 6050-47 6060-47
6035-49 6043-49 6050-49 6060-49
6043-41 6050-41
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:58 Page 21
21
**1000-84**1000-87 1000-85 1000-81 1000-82 1000-88 1000-83 1000-86
*1000-68*4000-13
Open-Tray Transfer Closed-Tray Transfer
Gold Titanium Plastic Gold/Plastic Titanium
1000-61 1000-62 1000-63
1000-64 1000-65 1000-66 1000-67 1000-69
Selection Chart: Overdenture & Screw-Retained Restorations
BallAbutment
Components
6035-726035-74
6043-726043-74
6050-726050-74
6060-726060-74
Ball Abutments
OverdentureAbutments
Overdenture Copings
OverdentureAbutment
Components
6035-616035-626035-64
6043-616043-62 6043-64
6050-616050-626050-64
6060-616060-626060-64
6035-64-306035-64-15
6043-64-306043-64-15
Overdenture Abutments (*Includes Transfer and Comfort Cap)
Overdenture Abutment Transfers, Analog & Comfort Cap
Ball Abutments (**Includes Transfer and Comfort Cap)
Ball Attachments
GPS™Abutment
Components
GPS™ Abutments
GPS™ Abutments (***Includes Transfer, Abutment Housing Kit and Comfort Cap)
GPS™ Attachments
6050-64-306050-64-15
OD AbutmentComfort Cap
Transfers and Analog
***1000-94
1000-92C
1000-95
1000-92E
1000-98S1000-93***4500-26
1000-92R1000-92G
6.0mmD Platform3.5mmD Platform 5.0mmD Platform4.3mmD Platform
6035-94-30 6035-94-15
6043-94-306043-94-15
6050-94-306050-94-15
6035-916035-926035-936035-946035-95
6043-916043-926043-936043-946043-95
6050-916050-926050-936050-946050-95
1000-92B1000-92P 1000-92W 1000-98SI 1000-96
***1000-91W1000-91
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:59 Page 22
Screw-Receiving & Ball Abutments
Code Collar Heights Platform6035-61 1mm 3.5mmD6035-62 2mm 3.5mmD6035-64 4mm 3.5mmD6043-61 1mm 4.3mmD6043-62 2mm 4.3mmD6043-64 4mm 4.3mmD6050-61 1mm 5.0mmD6050-62 2mm 5.0mmD6050-64 4mm 5.0mmD6060-61 1mm 6.0mmD6060-62 2mm 6.0mmD6060-64 4mm 6.0mmD
Overdenture Abutments
Ball Abutments
Code Description Platform6035-64-15 15° Angled Abutment 3.5mmD6043-64-15 15° Angled Abutment 4.3mmD6050-64-15 15° Angled Abutment 5.0mmD6035-64-30 30° Angled Abutment 3.5mmD6043-64-30 30° Angled Abutment 4.3mmD6050-64-30 30° Angled Abutment 5.0mmD
Angled Overdenture Abutments
Code Collar Heights Platform6035-72 2mm 3.5mmD6035-74 4mm 3.5mmD6043-72 2mm 4.3mmD6043-74 4mm 4.3mmD6050-72 2mm 5.0mmD6050-74 4mm 5.0mmD6060-72 2mm 6.0mmD6060-74 4mm 6.0mmD
Includes Transfer & Comfort Cap[Requires 1.25mmD Hex Tool]
Includes Dual-Grip™ Abutment Screw, Transfer &Comfort Cap [Screw Top requires 2.5mmD Hex Tool]
Includes Transfer & Comfort Cap[Requires 1.25mmD Hex Tool]
22
6035-72 6043-72 6050-72
6035-74 6043-74 6050-74
6060-72
6060-74
6035-61 6050-61 6060-61
6035-62 6050-62 6060-62
6043-61
6043-62
6050-64 6060-646043-646035-64
6035-64-30 6043-64-30 6050-64-30
6035-64-15 6043-64-15 6050-64-15
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 16:59 Page 23
GPSTM Abutments
Code Collar Heights Platform6035-91 1mm 3.5mmD6035-92 2mm 3.5mmD6035-93 3mm 3.5mmD6035-94 4mm 3.5mmD6035-95 5mm 3.5mmD6043-91 1mm 4.3mmD6043-92 2mm 4.3mmD6043-93 3mm 4.3mmD6043-94 4mm 4.3mmD6043-95 5mm 4.3mmD6050-91 1mm 5.0mmD6050-92 2mm 5.0mmD6050-93 3mm 5.0mmD6050-94 4mm 5.0mmD6050-95 5mm 5.0mmD
GPS™ Abutments & Angled Base Components
Includes Transfer, Comfort Cap, GPSTM Abutment Housing Kit &White Male Liner [use with 1.25mmD Hex Tool or NobelUnigrip ScrewDriver]
23
6035-92 6035-93
6043-91 6043-93 6043-94
6035-91
6043-92
6035-94 6035-95
6043-95
6050-93 6050-946050-926050-91 6050-95
Code Description Platform6035-94-15 15° Angled Abutment 3.5mmD6043-94-15 15° Angled Abutment 4.3mmD6050-94-15 15° Angled Abutment 5.0mmD6035-94-30 30° Angled Abutment 3.5mmD6043-94-30 30° Angled Abutment 4.3mmD6050-94-30 30° Angled Abutment 5.0mmD
Angled GPSTM Abutments Includes Abutment Screw, Transfer, Comfort Cap, GPSTM AbutmentHousing Kit & White Male Liner [GPSTM Top requires 1.25mmD Hex Tool]
6035-94-30 6043-94-30 6050-94-30
6035-94-15 6043-94-15 6050-94-15
Code Description1000-60 Replacement Screw Top for Angled Base [Requires 2.5mmD Hex Tool]1000-70 Replacement Ball Top for Angled Base [Requires 1.25mmD Hex Tool]1000-90 Replacement GPSTM Top for Angled Base [Requires 1.25mmD Hex Tool]
Replacement Tops for Angled Abutments Includes Transfer & Comfort Cap
1000-901000-701000-60
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 17:00 Page 24
Code Description1000-96 Core Tool - Male Removal & Seating Tool
GPSTM Instrumentation
Ball Abutment Components
Code Platform Description1000-61 5.0mmD Aluminum Analog1000-62 5.0mmD Open-Tray Transfer plus Fixation Screw1000-63 5.0mmD Closed-Tray Transfer plus Fixation Screw1000-68 5.0mmD Plastic Abutment Transfer - 2ea4000-13 5.0mmD Plastic Comfort Cap - 2ea1000-14 - Replacement Open-Tray Fixation Screw - 2ea1000-15 - Replacement Closed-Tray Fixation Screw - 2ea
Code Description1000-94 Impression Coping - 2ea1000-95 Abutment Analog 4mmD - 2ea1000-97 Abutment Parallel Post - 4ea4500-26 Comfort Cap - 2ea1000-99 Plastic Abutment Angle Measure Guide
Code Description1000-81 Ball Abutment Housing - 2ea1000-82 Nylon Liner - 2ea1000-83 Nylon Liner Transfer - 2ea1000-84 Ball Abutment Transfer - 2ea1000-85 Ball Abutment Analog1000-86 Ball Abutment Tools1000-87 Ball Abutment Comfort Cap - 2ea1000-88 Ball Abutment Housing & Nylon Liner
24
GPSTM Abutment Transfer, Analogs & Alignment Tools
Ancillary Components for Overdenture & Screw-Retained Restorations
Screws require 1.25mmD Hex ToolOverdenture Abutment Comfort Cap, Transfers & Analog
1000-82
1000-84
1000-861000-85 1000-87 1000-88
1000-831000-81
1000-681000-61 1000-62 1000-63 4000-13
1000-99
1000-97
1000-95
4500-26
1000-94
Code Retention Force Description1000-92W 5.0lbs Internal Replacement Male White - 4ea1000-92P 3.0lbs Internal Replacement Male Pink - 4ea1000-92B 1.5lbs Internal Replacement Male Blue - 4ea1000-92C 4.5lbs External Replacement Male Clear - 4ea1000-92G 3.0lbs External Replacement Male Green - 4ea1000-92E 2.0lbs External Replacement Male Orange - 4ea1000-92R 1.0lb External Replacement Male Red - 4ea1000-91 - GPSTM Abutment Housing Kit - 1ea1000-91W - GPSTM Housing Kit w/ White Internal Male- 1ea1000-93 - Black Processing Male - 4ea1000-98SI Assorted Internal Processing Cap/Male Kit - 1ea1000-98S Assorted External Processing Cap/Male Kit - 1ea
GPSTM Abutment Components
Overdenture Abutment Components
Code Platform Description1000-64 5.0mmD Gold Coping1000-65 5.0mmD Titanium Coping1000-66 5.0mmD Plastic Coping1000-67 5.0mmD Gold & Plastic Coping1000-69 5.0mmD Titanium Temporary Coping 1000-05 - Coping Fixation Screw - 2ea1000-25 - Dual-Grip™ Coping Fixation Screw - 2ea
1000-661000-65 1000-67
1000-05
1000-64 1000-691000-25
Includes Fixation Screw [1000-05], optional Dual-Grip™ Fixation Screw [1000-25]
1000-96
1000-92B
1000-92E1000-92P
1000-98S
1000-911000-91W
1000-92G1000-92W
1000-98SI
1000-92C
1000-92R
1000-93
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 17:01 Page 25
Code DescriptionHT1.25L 1.25mmD Straight Hex Tool Extra Long (For use with Torque Wrench)HT1.25 1.25mmD Straight Hex Tool Long (For use with Torque Wrench)
HT1.25S 1.25mmD Straight Hex Tool Short (For use with Torque Wrench)HT2.0 2.0mmD Straight Hex Tool LongHT2.0S 2.0mmD Straight Hex Tool ShortHT2.5 2.5mmD Straight Hex Tool-Long (with retentive O-ring)HT2.5S 2.5mmD Straight Hex Tool-Short (with retentive O-ring)HT3.0 3.0mmD Straight Hex Tool-LongHT3.0S 3.0mmD Straight Hex Tool-Short
Tapered Hex Tools
Code DescriptionTHT1.25 1.25mmD Tapered Hex Tool-LongTHT1.25S 1.25mmD Tapered Hex Tool-Short
Hex Drills
Code DescriptionHD1.25 1.25mmD Hex DrillHD2.0 2.0mmD Hex DrillHD2.5 2.5mmD Hex Drill (with retentive O-ring)HD3.0 3.0mmD Hex Drill
Ancillary Instruments
Code DescriptionR Ratchet
TW30 30Ncm Torque WrenchTW35 35Ncm Torque WrenchSSH2.5 2.5mmD Stainless Steel Handle (with retentive O-ring)
FMD Fixture Mount Drill (with retentive O-ring)PAR Paralleling Tool 2.8/2.3
LDRILL Locator Drill (2.3mmD)DE Drill ExtenderTWM Multi-Setting Torque Wrench (15, 20, 25, 30, 35, 40, 45, 50 & 60Ncm)ABH Analog Holder
Surgical Trays
Code DescriptionST Empty Surgical Kit for RePlus® & ReActiveTM System ImplantsBST Basic Surgical Kit for RePlus® & ReActiveTM System ImplantsCST Surgical Kit for RePlus® & ReActiveTM System ImplantsRST Empty Surgical Kit for RePlant® System ImplantsRBST Basic Surgical Kit for RePlant® System ImplantsRCST Surgical Kit for RePlant® System Implants
Straight Hex Tools
25
RST RCSTRBST
ST CSTBST
HT3.0HT2.5HT2.0HT1.25
HT2.5S HT3.0SHT2.0SHT1.25S
Surgical & Prosthetic Instruments
THT1.25STHT1.25
HD1.25 HD3.0HD2.0 HD2.5
R TW30
PARFMD DELDRILL
ABH
TWM
HT1.25L
TW35 SSH2.5
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 17:01 Page 26
26
Pilot Drills
Code DescriptionSD2.3 2.3/2.0mmD Step Drill with 6-16 markingsSD2.3S 2.3/2.0mmD Step Drill with 6-10 markingsSD2.8 2.8/2.3mmD Step Drill with 6-16 markingsSD2.8S 2.8/2.3mmD Step Drill with 6-10 markings
SD2.3 SD2.3S SD2.8 SD2.8S
Surgical Drills: RePlus® & ReActiveTM Implants
3.7mmD Implants
Code DescriptionSD3.4 3.4/2.8mmD Step Drill with 6-16 markingsSD3.4S 3.4/2.8mmD Step Drill with 6-10 markingsCBD3.7 Cortical Bone Drill for 3.7mmD Implants
SD3.4 SD3.4S CBD3.7
4.7mmD Implants
Code DescriptionSD4.4 4.4/3.8mmD Step Drill with 6-16 markingsSD4.4S 4.4/3.8mmD Step Drill with 6-10 markingsCBD4.7 Cortical Bone Drill for 4.7mmD Implants
SD4.4 SD4.4S
4.2mmD Implants
Code DescriptionSD3.8 3.8/3.4mmD Step Drill with 6-16 markingsSD3.8S 3.8/3.4mmD Step Drill with 6-10 markingsCBD4.2 Cortical Bone Drill for 4.2mmD Implants
SD3.8 SD3.8S
5.7mmD Implants
Code DescriptionD5.1 5.1mmD Straight Drill with 6-16 markingsD5.1S 5.1mmD Straight Drill with 6-10 markingsSD5.4 5.4/4.8mmD Step Drill with 6-16 markingsSD5.4S 5.4/4.8mmD Step Drill with 6-10 markingsCBD5.7 Cortical Bone Drill for 5.7mmD Implants
D5.1 D5.1S SD5.4 SD5.4S
Optional Drills
Code DescriptionSD4.8 4.8/4.4mmD Step Drill with 6-16 markingsSD4.8S 4.8/4.4mmD Step Drill with 6-10 markings
SD4.8 SD4.8S
CBD4.2
CBD4.7
CBD5.7
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 17:02 Page 27
SD3.43.4/2.8mmD
CBD3.7SD2.82.8/2.3mmD
SD2.32.3/2.0mmD
Dense Bone FinalSoft Bone Final OptionalBone Contour
SD4.44.4/3.8mmD
SD4.84.8/4.4mmD
SD3.83.8/3.4mmD
SD5.45.4/4.8mmD
CBD5.7D5.1 5.1mmD
SD3.43.4/2.8mmD
SD2.82.8/2.3mmD
Optional OptionalOptional
SD2.32.3/2.0mmD
Dense Bone FinalSoft Bone Final OptionalBone Contour
SD3.83.8/3.4mmD
CBD4.2SD3.43.4/2.8mmD
SD2.82.8/2.3mmD
Optional
SD2.32.3/2.0mmD
Dense Bone FinalSoft Bone Final OptionalBone Contour
SD4.44.4/3.8mmD
CBD4.7SD3.83.8/3.4mmD
SD3.43.4/2.8mmD
SD2.82.8/2.3mmD
Optional
SD2.32.3/2.0mmD
Dense Bone FinalSoft Bone Final OptionalBone Contour
27
RePlus® & ReActiveTM Drill Sequence
3.7mmD RePlus® & ReActiveTM Tapered Implant
4.2mmD RePlus® & ReActiveTM Tapered Implant
4.7mmD RePlus® & ReActiveTM Tapered Implant
5.7mmD RePlus® & ReActiveTM Tapered Implant
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 17:02 Page 28
28
Complete Surgical Tray Contents
THT1.25S HT1.25S HT2.0S HT2.5S HT3.0S
THT1.25
PAR (4)
LDRILL DE
R
SSH2.5
HT1.25 HT2.0 HT2.5 HT3.0
HD2.0HD1.25FMD HD3.0HD2.5
SD3.4 SD3.4SSD2.8 SD2.8S SD3.8 SD3.8S SD4.4 SD4.4S SD4.8 SD4.8S
D5.1 D5.1S
SD2.3 SD2.3S
SD5.4 SD5.4S
CBD5.2CBD4.7CBD4.2CBD3.7CBD3.2
CBD5.7
lower level of surgical tray
29
Surgical Tray
Inside EmptyTray
Lid
Surgical Tray Contents Complete Kit Basic Kit Conversion KitCode DescriptionST Empty Surgical Tray X X X
SD2.3 2.3/2.0mmD Step Drill-Long X XSD2.3S 2.3/2.0mmD Step Drill-Short XSD2.8 2.8/2.3mmD Step Drill-Long X XSD2.8S 2.8/2.3mmD Step Drill-Short XCBD3.2 3.2mmD Cortical Drill X XSD3.4 3.4/2.8mmD Step Drill-Long X XSD3.4S 3.4/2.8mmD Step Drill-Short XCBD3.7 3.7mmD Cortical Drill X XSD3.8 3.8/3.4mmD Step Drill-Long X X XSD3.8S 3.8/3.4mmD Step Drill-Short X XCBD4.2 4.2mmD Cortical Drill X XSD4.4 4.4/3.8mmD Step Drill-Long X XSD4.4S 4.4/3.8mmD Step Drill-Short XCBD4.7 4.7mmD Cortical Drill X XSD4.8 4.8/4.4mmD Step Drill-Long X X XSD4.8S 4.8/4.4mmD Step Drill-Short X XCBD5.2 5.2mmD Cortical Drill X XD5.1 5.1mmD Straight Drill-Long X XD5.1S 5.1mmD Straight Drill-Short XSD5.4 5.4/4.8mmD Step Drill-Long X XSD5.4S 5.4/4.8mmD Step Drill-Short XCBD5.7 5.7mmD Cortical Drill X X
Hex ToolsTHT1.25 1.25mmD Tapered Hex Tool-Long X XTHT1.25S 1.25mmD Tapered Hex Tool-Short XHT1.25 1.25mmD Straight Hex Tool-Long X XHT1.25S 1.25mmD Straight Hex Tool-Short XHT2.0 2.0mmD Hex Tool-Long X XHT2.0S 2.0mmD Hex Tool-Short XHT2.5 2.5mmD Hex Tool-Long X XHT2.5S 2.5mmD Hex Tool-Short XHT3.0 3.0mmD Hex Tool-Long X XHT3.0S 3.0mmD Hex Tool-Short XHD1.25 1.25mmD Hex Drill X XHD2.0 2.0mmD Hex Drill X XHD2.5 2.5mmD Hex Drill X XHD3.0 3.0mmD Hex Drill X X
Ancillary InstrumentationFMD Fixture Mount Drill XLDRILL Locator Drill X XDE Drill Extender X XR Ratchet X X
PAR (x4) Paralleling Tool 2.8/2.3 X XSSH2.5 2.5mmD Stainless Steel Handle X
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 17:03 Page 30
Dense Bone Drills
30
Code DescriptionRDB3 3.2mmD Dense Bone Drill for 3.5mmD ImplantRDB4 4.0mmD Dense Bone Drill for 4.3mmD ImplantRDB5 4.7mmD Dense Bone Drill for 5.0mmD ImplantRDB6 5.7mmD Dense Bone Drill for 6.0mmD Implant
RDB6RDB5RDB4RDB3
RePlant® Insertion Tools
Code DescriptionRTT3 Stainless Steel Tri-Lobe Insertion Tool for 3.5mmD ImplantRTT4 Stainless Steel Tri-Lobe Insertion Tool for 4.3mmD ImplantRTT5 Stainless Steel Tri-Lobe Insertion Tool for 5.0mmD ImplantRTT6 Stainless Steel Tri-Lobe Insertion Tool for 6.0mmD Implant
RTT6RTT5RTT4RTT3
RePlant® Insertion Drills
Code DescriptionRTD3 Stainless Steel Tri-Lobe Insertion Drill for 3.5mmD ImplantRTD4 Stainless Steel Tri-Lobe Insertion Drill for 4.3mmD ImplantRTD5 Stainless Steel Tri-Lobe Insertion Drill for 5.0mmD ImplantRTD6 Stainless Steel Tri-Lobe Insertion Drill for 6.0mmD Implant
RTD6RTD5RTD4RTD3
Surgical Drills: RePlant® & NobelReplace™ Tapered Groovy Implants
Soft Bone Drills
Code DescriptionRSB3 2.8/2.3mmD Step Drill for 3.5mmD ImplantRSB3S 2.8/2.3mmD Short Step Drill for 3.5mmD ImplantRSB4 3.4/2.8mmD Step Drill for 4.3mmD ImplantRSB4S 3.4/2.8mmD Short Step Drill for 4.3mmD ImplantRSB5 4.2/3.3mmD Step Drill for 5.0mmD ImplantRSB5S 4.2/3.3mmD Short Step Drill for 5.0mmD ImplantRSB6 5.1/4.2mmD Step Drill for 6.0mmD ImplantRSB6S 5.1/4.2mmD Short Step Drill for 6.0mmD Implant
RSB5 RSB5S RSB6 RSB6S
Latch head connection for use with Surgical Motor
Pilot Drills for All Implants
Code DescriptionSD2.3 2.3/2.0mmD Step Drill with 6-16 markingsSD2.3S 2.3/2.0mmD Step Drill with 6-10 markings
Square connection for use with Ratchet or Torque Wrench
SD2.3 SD2.3S
RSB3 RSB3S RSB4 RSB4S
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 17:04 Page 31
RDB33.2mmD
RSB32.8/2.3mmD
SD2.32.3/2.0mmD
Dense Bone FinalSoft Bone Final
RSB54.2/3.3mmD
RDB65.7mmD
RSB65.1/4.2mmD
RSB43.4/2.8mmD
RSB32.8/2.3mmD
Optional
SD2.32.3/2.0mmD
Dense Bone FinalSoft Bone Final
RDB44.0mmD
RSB43.4/2.8mmD
RSB32.8/2.3mmD
Optional
SD2.32.3/2.0mmD
Dense Bone FinalSoft Bone Final
RDB54.7mmD
RSB54.2/3.3mmD
RSB43.4/2.8mmD
RSB32.8/2.3mmD
Optional
SD2.32.3/2.0mmD
Dense Bone FinalSoft Bone Final
31
RePlant® Drill Sequence
3.5mmD RePlant® Straight / Tapered Implant
4.3mmD Straight / Tapered Implant
5.0mmD Straight / Tapered Implant
6.0mmD Straight / Tapered Implant
Surgical Drills: RePlant® & NobelReplace™ Tapered Groovy Implants
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 17:04 Page 32
32
Surgical Tray for RePlant® & NobelReplace™ Tapered Groovy Implants
RSB6 RSB6SRSB5 RSB5S RDB5
RTT3 RTT4 RTT5 RTT6HT2.5S
RSB4 RSB4SSD2.3 SD2.3S RDB3RSB3 RSB3S RDB4 RDB6
PAR (4)
LDRILL DE
HT2.5
RTD3 RTD4 RTD5 RTD6
FMD HD1.25
HD2.5
R
SSH2.5
lower level of surgical tray
HT1.25STHT1.25S
HT1.25THT1.25
33
Surgical Trays - RePlant® Complete, Basic & Upgrade Kit
Inside EmptyTray
Lid
Surgical Tray Contents Complete Kit Basic Kit Upgrade KitCode Description
RST Empty Surgical Tray X X
SD 2.3 2.3/2.0mmD Step Drill-Long X X
SD2.3S 2.3/2.0mmD Step Drill-Short X X
RSB3 2.8/2.3mmD Step Drill for 3.5mmD Implant X X
RSB3S 2.8/2.3mmD Short Step Drill for 3.5mmD Implant X X
RSB4 3.4/2.8mmD Step Drill for 4.3mmD Implant X X
RSB4S 3.4/2.8mmD Short Step Drill for 4.3mmD Implant X X
RSB5 4.2/3.3mmD Step Drill for 5.0mmD Implant X X
RSB5S 4.2/3.3mmD Short Step Drill for 5.0mmD Implant X X
RSB6 5.1/4.2mmD Step Drill for 6.0mmD Implant X X
RSB6S 5.1/4.2mmD Short Step Drill for 6.0mmD Implant X X
RDB3 3.2mmD Dense Bone Drill for 3.5mmD Implant X X
RDB4 4.0mmD Dense Bone Drill for 4.3mmD Implant X X
RDB5 4.7mmD Dense Bone Drill for 5.0mmD Implant X X
RDB6 5.7mmD Dense Bone Drill for 6.0mmD Implant X X
THT1.25 1.25mmD Tapered Hex Tool-Long X X
THT1.25S 1.25mmD Tapered Hex Tool-Short X X
HT1.25 1.25mmD Straight Hex Tool-Long X X
HT1.25S 1.25mmD Straight Hex Tool-Short X XHT2.5 2.5mmD Straight Hex Tool-Long X X
HT2.5S 2.5mmD Straight Hex Tool-Short X X
HD1.25 1.25mmD Hex Drill X X
HD2.5 2.5mmD Hex Drill X X
RTT3 Tri-Lobe Insertion Tool for 3.5mmD Implant X X
RTT4 Tri-Lobe Insertion Tool for 4.3mmD Implant X X
RTT5 Tri-Lobe Insertion Tool for 5.0mmD Implant X X
RTT6 Tri-Lobe Insertion Tool for 6.0mmD Implant X XRTD3 Tri-Lobe Insertion Drill for 3.5mmD Implant X X
RTD4 Tri-Lobe Insertion Drill for 4.3mmD Implant X X
RTD5 Tri-Lobe Insertion Drill for 5.0mmD Implant X X
RTD6 Tri-Lobe Insertion Drill for 6.0mmD Implant X X
FMD Fixture Mount Drill X X
LDRILL Locator Drill X X
DE Drill Extender X X
R Ratchet X X
PAR (x4) Paralleling Tool 2.8/2.3 X X
SSH2.5 2.5mmD Stainless Steel Handle X X
EU_Tri-Lobe Catalog 2013 INT.qxp:Layout 1 24/02/14 17:05 Page 34