SUPPLIERS TO INDUSTRY
WWW.TRADEZONE.CO.NZ
Valid from 1st April to 31st May 2014 • VOL 137
(North Island Stores Only) (South Island Stores Only)
WIN the Xcel-Arc TIG200AC/DC Welder Package: To WIN simply buy any Esseti or Xcel-Arc product featured in pages 2 through 5 and complete an entry form to enter the nationwide draw, Value $3,400.00 See in store or www.tradezone.co.nz for details.
WIN AN AMAZING XCELARC
TIG200 AC/DC WELDERWINNER TAKES ALL !
CAUTIONCONTAINS EXTREMELY
HOT WELDING & CUTTING DEALS
WELDING &FABRICATIONPROMOTION
Caliper #137.indd 1 13/03/14 4:17 PM
WARRANTY
WARRANTY
2
Power Supply 415 -3 +/- 15%Wire Feeder Type Gear Driven 4 RollDuty Cycle @ 40°c 40% @ 500AmpsCurrent Range MIG 40A - 500 AmpsCurrent Range MMA 20A - 500 Amps
• Industrial 500 Amp Power Source • 10m Long Interconnecting Cables • Control Settings at the Wire Feeder• 4 Drive Roll Separate Wire Feeder• Digital Meters• Crater Current Setting• 2/4T Trigger Function• Trolley with Accessory Drawer
XA-MIG500SWF-SP
XA-MIG500 AMP welder M.T.S MIG-TIG-STIck InverTer
500 AMPS of Pure GrunT
TIG TORCH IS OPTIONAL & EXTRAc/w Mig Torch, Arc Set & regulatorCompliant to AS/NZ 60947 Standard
Power Supply 415v - 3Ph Duty Cycle @ 25°c 70% @ 350ACurrent Range MIG 30 - 350ACurrent Range MMA 10- 350ARated Power 15 KVADimensions (LxWxH) 900x400x670mm Weight 60kg
350AMP, 415volT 3 PHASelIfT Arc dc TIG - STIck (MMA)dIGITAl MeTerS, vrd SAfeTYSPoolGun connecTIon
c/w Mig Torch, Arc Set & regulatorTig Torch is Optional and Extra
XA-MIG350MTS-SP
XA MIG350MTS
XA-MIG250D-SP
Power Supply 230v - 1Ph Duty Cycle @ 25°c 60% @ 250ACurrent Range MIG 30 - 250ACurrent Range MMA 10- 200A Current Range TIG 10- 250ARated Power 10.8 KVADimensions (LxWxH) 620x290x500mm Weight 35kg
XA-MIG250d - digital control250AMP - 230v - 15kG SPool MIG, lIfT Arc dc TIG, STIckSPool Gun reAdY, vrd SAfeTY
XA260 Suregrip Digital Control Mig torch allows you to adjust wire feed speed and voltage settings during real time welding providing you the ultimate in control.
GenuIS! dIGITAl TorcH reMoTe
c/w digital Mig Torch Arc Set & regulatorTig Torch is Optional and Extra
MIG - PulSe MIG - TwIn PulSe MIG - dc TIG - dc PulSe TIGPulSe MIG welder - MulTIfuncTIon - 230v
• 250 Amp 230V • Simple Operation • Synergic Double Pulse • High Speed Mig/Mag• DC Tig Synergic & Manual• MMA Synergic & Manual • Push Pull Gun Ready• Trolley with Drawer• 20-250 Amps • Weight 60Kg
TIG fInISH weldS wITH MIG
with Mig Torch, Arc Set & regulatorTig Torch is Optional and Extra
V0066AA
MIG TorcHeS• High Quality • Superior Comfort • Euro Connection • Binzel Style Parts
Power Supply 230v - 1Ph Duty Cycle @ 25°c 60% @ 250ACurrent Range MIG 30 - 250ACurrent Range MMA 10- 250ARated Power 12 KVADimensions (LxWxH) 900x400x670mm Weight 58kg
250AMP, 230volT 1 PHASelIfT Arc dc TIGdIGITAl MeTerS, vrd SAfeTYSPoolGun connecTIon
c/w 4m Mig Torch, Arc Set & Gauged flow regulatorTig Torch is Optional and Extra
XA-MIG250MTS-SP
XA-MIG250MTS MIG250A SInGle PHASe MIG BeST PrIce!
SuPer SHArP PrIce!
MIG200rz MIG/MMA
Power Supply 230v - 1Ph Duty Cycle @ 25°c 45% @ 200ACurrent Range MIG 30 - 200ACurrent Range MMA 10- 200ARated Power 7.0 KVADimensions (LxWxH) 470x190x380mm Weight 18kg
200 AMP - 230v - 5kG SPool MIG/STIck - Spool Gun ready
Compliant to AS/NZ 60947 Standard
• 200 Amp 230V • MIG Gas/Gasless• Spool Gun Ready • Hot Start Electrode• Takes 5Kg Spool • Light Weight
XA15-4 XA15 Mig Torch 180A x 4m $134.78 +GST $155.00 inc GSTXA25-4 XA25 Mig Torch 230A x 4m $173.04 +GST $199.00 inc GSTXA24-4 XA24 Mig Torch 250A x 4m $213.04+GST $245.00 inc GSTXA36-4 XA36 Mig Torch 320A x 4m $278.26 +GST $320.00 inc GST
Xcel-Arc SureGrIP
oPTIonAl TIG TorcH kIT deAlXA17V SUREGRIP TIG TORCH x 4mTIG SPARES PARTS KIT
XA-TK3
XA-MIG200RZ-SP
Razorweld$4,975.00 GST Incl.
$4,326 09 $2,180.00 GST Incl.
$1,895 65
$1,599.00 GST Incl.
$1,390 43
$3,150.00 GST Incl.
$2,739 13
$5,999.00 GST Incl.
$5,216 52
$1,995.00 GST Incl.
$1,734 78
$178.00 GST Incl.
$15478
3
New Generation Technology Razorweld
THe BeST 230v - 200 AMP TIG Acdc on THe PlAneTMULTI WAVE-the most innovative power source system specifically developed for Tig AC/DC. The welding performance is enhanced solely to the new advanced “MULTI WAVE” welding technological development
dIGITAl! MulTIwAve TIG Ac/dc 200A
MulTI wAve AdvAnTAGeAc/dc weldInG lIke You’ve never HAd Before
Power Supply 230V +/- 15%Duty Cycle @ 25°c 80% @200 AmpsCurrent Range TIG AC 10A - 200 AmpsCurrent Range TIG DC 05A - 200 AmpsCurrent Range MMA 20A - 160 AmpsRated Power 5.4 KVAWeight 18 KgDimensions (LxWxH) 310x430x550mm
• MIX AC welding for thicker material and higher speed.• MIX DC innovative system allows welding gaps without filler material.
V0095AA-SP
C/w - Arc Set 4m, Carry CaseTig Torch is optional and extra
XA-Arc170 SuPer deAl !
• 170 Amp 230V, • Electrode Hot Start • Adjustable Arc Force • Tig Lift Arc - Soft Start • 60% Duty Cycle • 10 -170 Amps • Weighs 5.2 Kg • Generator Compatible
MMA/TIG dc InverTer welderPerforMAnce Proven!relIABIlTY confIrMed!Compliant to AS/NZ 60947 Standard
XA-Arc200 MMA/TIG dc InverTer200A dc MMA/TIG
Industrial 200Amp 230v Stick electrode (MMA) lift Arc dc Tig• On/Off VRD Select • Electrode Hot Start • Adjustable Arc Force • Tig Lift Arc - Soft Start • 50% Duty Cycle • 10 -200 Amps • Weighs 8.2 Kg • Generator CompatibleAS/NZ 60947 Standard Compliant
c/w Arc Set x 4m Tig Torch is Optional & Extra
BonuS PAckeT 3.2XAGP elecTrodeS !
XA-ARC200-SP
MONTH 24Machine warranty
TIG -HF Arc Ignition - Stick (MMA) 2T/4T Trigger - Pulse SelectDown Slope - Post GasRemote Amp Control Select
XA TIG180PR Machine XA17x8m Torch + Spares Earth Lead & Arc LeadArgon Flowmeter
XA-TIG180P dc TIG/Hf InverTer PulSe welder180AMP, 230volT SInGle PHASeInduSTrIAl dc TIG InverTer
PAckAGe deAl:
MONTH 24Machine warranty
Compliant to AS/NZ 60947 Standard
dIGITAl TIG 200A dc PulSeInduSTrIAl 40kHz InverTer200AMP - 230v SInGle PHASe full function digital control
Power Supply 230v - 1Ph Duty Cycle @ 25°c 45% @ 200ACurrent Range TIG 05 - 200ACurrent Range MMA 10- 160ARated Power 7.0 KVADimensions (mm) 400x150x260 Weight 9kg
• DC TIG HF Arc Ignition • Pulse Frequency 0.5 - 200Hz • Peak & Base Current Control • Pulse Width Adjustment• 2T/4T Trigger, Spot Time• Start & Final Current Control • Pre & Post Gas Flow Control • Up & Down Slope Control • MMA Arc Ignition Control • MMA Arc Force Control • Approved AS/NZ 60947 Standard
c/w XA26 x 8m Tig Torch, earth lead 4m, Arc lead 4m Twin flow Argon regulator, Machine & Gear carry Bag
XA-TIG200PRZ-SP
c/w XA26Tig Torch 4m Arc lead Set & regulator
XA-TIG200RZ ACDC-SP
new dIGITAl funcTIonXA-TIG200 dIGITAl Ac/dc 200 AMP InverTer
lIMITed InTroducTorY offer!
XA-ARC170-SP
MONTH 24Machine warranty
XA-TIG180PR-SP
New Generation Technology Razorweld
• AC/DC TIG HF Arc Ignition • AC Square Wave Balance Control • Pulse Frequency 0.5 - 200Hz • Peak & Base Current Control • Pulse Width Adjustment• 2T/4T Trigger, Spot Time• Start & Final Current Control • Pre & Post Gas Flow Control • Up & Down Slope Control • MMA Arc Ignition Control • MMA Arc Force Control • Approved AS/NZ 60947 Standard
MONTH 24Machine warranty
$1,550.00 GST Incl.
$1,347 83
$4,200.00 GST Incl.
$3,652 17
$2,995.00 GST Incl.
$2,604 35
$1,785.00 GST Incl.
$1,552 17
$592.00 GST Incl.
$51478
$770.00 GST Incl.
$66957
WELDERST-SHIRT WIDE VIEW
HELMET
4
For Confined Spaces, Inspection, Tank Work, Pipe Welding, Military, Remote & Mobile Welding, Ideal for Hard Hat situations. Available in Blue, Silver & Bronze
new IMProved Model wITH P.f.c
PlASMA cuTTer 230vcuTS 15mm Steel - SeverS 25mm Steel
XA-CUT40RZ-SP
new Generation Technology A Cut Above The Rest
MONTH 24Machine warranty
40 Amp - 230V 1 Phase30% Duty Cycle @ 40°C PFC - Power Factor CorrectionCNC Compatible Weight 12.2Kg Quality TorchIndustrial Quality Approved AS/NZ 60947 Standard
c/w Plasma Torch Torch Spares kit & earth lead
InduSTrIAl InverTer PlASMA cuTTerHIGH PerforMAnce 55 AMP• Industrial 3 Phase 415V• Euro Connection Torch• HF Start• 20mm Maximum Cut• European Plasma Torch• Portable - 21kgHeavy duty TecMo 100 Amp Plasma Torch with Spares
XA-cuT55 AIr PlASMA cuTTer - 20MM cuT
XA-CUT55-SPC/w - Plasma Torch, Spares Kit Earth Lead, Air Regulator
InduSTrIAl InverTer PlASMA cuTTerHIGH PerforMAnce 105 AMP• Industrial 3 Phase 415V• Euro Connection Torch• HF Start• 30mm Maximum Cut• European Plasma Torch• Portable - 30kg
Heavy duty SureGrIP 150A Plasma Torch with Spares
XA-cuT105 AIr PlASMA cuTTer - 30MM cuT
XA-CUT105-SPC/w - Plasma Torch, Spares Kit Earth Lead, Air Regulator
4 SensorsShade 9-13Delay to Dark TimerSensitivity AdjustmentSolar Powered Battery Grind Warning Flash Low Amp Tig Capable
AS4000w wIde Screen HelMeTBIG 100mm x 60mm vISIon AreA
HIGH QuAlITY - TIG oPerABle - AnSI z87.1 APProved AS4000W-SP
GrInd Mode funcTIon
WARRANTY
AS3000F
High Quality 2 Independent Sensors Solar Cell PoweredAdjustable Shade 9-13Adjustable SensitivityAdjustable Delay to Clear
AuToweld AS3000f HelMeTBeST PerforMAnce And relIABIlITY
WIDE SCREEN
XA-10-1027-L GDS Tig Welding Gloves-LargeXA-10-1027-XL GDS Tig Welding Gloves-X Large
G.d.S ulTIMATe TIG Glove
wArnInG! once You uSe THeM You’ll Be Hooked .
HeAT reflecTIve HeAvY duTY weldInG GloveS Full Aluminised PFR Rayon heat reflective forehand giving prolonged, superior radiant heat protection during welding. The aluminised Herringbone pattern reflects 95% of radiant heat allowing you make longer better quality welds. The unique 3 dimensional finger construction offers unrestricted mobility and sensitivity of fingers, the glove construction pattern offers an excellent fit and the materials used are specially processed for superior pliability.
AMAzInG! AuToMATIc weldInG GoGGleS • Arc Welding • Mig Welding • Tig Welding • Plasma Cutting • Gas Welding
Technical DataReaction Time 0.05msSensors 2 x IndependentShade: 5-7-9-11-13Sensitivity AdjustableDelay Control AdjustablePower Supply Battery, Solar CellsOperating Temp -10°C to 55°CStandards ANSI Z87.1 / DINWarranty 12 months
New!Face Clip
Shield
wArnInG! Developed by a Welder for TIG welding. Constructed out of 3 types of leather -“deer skin” palm for excellent finger tip sensitivity “goat skin” back for dexterity and heat protection & cowhide cuff for durable wrist & forearm protection. 100% Kevlar stitched for strength & better protection against seam burn out.
SuPer SHArP PrIce!
MASSIve SAvInG $1,000.00
CRAZY
AMAZING
PRICE!
XA-10-2755-L XA Heat Reflective Glove - LXA-10-2755-XL XA Heat Reflective Glove - XL
XA1390/S
Xcel-Arc AnTI SPATTer Special formulation Allows Surface Painting After useSilicon free - Benzene freenon - flammable - cfc free
400g Aerosol can
WLSIL-SP
WARRANTY
$2,470.00 GST Incl.
$2,147 83
$1,440.00 GST Incl.
$1,252 17
$3,740.00 GST Incl.
$3,252 17
$299.00 GST Incl.
$26000
$395.00 GST Incl.
$34348
$135.00 GST Incl.
$11739
$35.00 GST Incl.
$3043 PAIR
$8.50 GST Incl.
$7 39
$23.00 GST Incl.
$20 00 PAIR
WELDERST-SHIRT
5
$560.00 GST Incl.
$48696
GASleSS MIG wIre
XAE71TGS08450.8mm x 4.54kg Spool
XAE71TGS09450.9mm x 4.54kg Spool
fluX cored GASleSS wIre GreAT for ouTdoor uSe
SMooTH STABle Arc
XAE71T1112451.2mm x 4.54kg Spool
Precision Level Layer Wound • Triple De-oxidised • X-Ray Quality Smooth Feeding • Clean Weld Finish • International Approvals
Manufactured & Compliant to AS/NZ4267 Standard
1 x Heavy Duty Tool Box 1 x 10 Metre Twin Line Hose Set1 x Oxygen Regulator1 x Acetylene or LPG Regulator 1 x Blow Pipe Handle1 x Cutting Attachment 3 x Cutting Nozzles 1 x Mixer & 3 x Weld / Braze Tips 1 x Heating Tip Acetylene Only1 x Oxygen Flash Back Arrestor 1 x Fuel Gas Flash Back Arrestor1 x Combination Spanner1 x Radius Bar and Pivot1 x Roller Guide & Tip Cleaner Set 1 x Welding / Cutting Goggles
InduSTrIAl cuTTInG weldInG & BrAzInG SeTSoXYGen AceTYlene And lPG GAS SeTS
AMAZING PRICE
XG-GSK-A1 (ACETYLENE) - XG-GSK-LPG1 (LPG)
IncludeS reGulATor flASH BAck ArreSTorS
PrecISIon level lAYer wound e-70S-6 -TrIPle de-oXIdISedNo.8 SolId MIG weldInG wIre
Code Product Desc r ip t ion +GST Inc lus iveXA530805 5356 x 0.8mm Al Mig Wi re x 0.45kg $13.04 $15.00 XA531005 5356 x 1.0mm Al Mig Wi re x 0.45kg $12.61 $14.50 XA531205 5356 x 1.2mm Al Mig Wi re x 0.45kg $12.00 $13.80
XA531020 5356 x 1.0mm Al Mig Wi re x 2.0kg $50.43 $58.00
XA531220 5356 x 1.2mm Al Mig Wi re x 2.0kg $47.83 $55.00
• High Quality • Triple Shaved • X-Ray quality• Precision Layer Wound • Smooth Feeding• Low Fume Factor • Clean Welds • Approvals• AWS, ABS, CWB, Lloyds, DNV, TUV, DB
AluMInIuM MIG wIreTrIPle dIAMond SHAved PrecISIon lAYer wound
XAN80805 0.8mm x 5.0kg XAN80905 0.9mm x 5.0kg
XAN80815 0.8mm x 15.0kg XAN80915 0.9mm x 15.0kg
XAN81015 1.0mm x 15.0kg XAN81215 1.2mm x 15.0kg
XAN80605 0.6mm x 5.0kg
No.8WIRE
No.8WIRE
Par t No. Type 10pc Pkt +GST Inc lus iveWT20-16-175 Thor ia ted 1.6mm $16.96 $19.50 WT20-24-175 Thor ia ted 2.4mm $ 34.78 $40.00
WZ8-24-175 Z i rcon iated 2.4mm $ 34.78 $40.00
WZ8-32-175 Z i rcon iated 3.2mm $ 72.17 $83.00
TunGSTen elecTrodeSSuPerIor eleMenT MIX SuPer fIne GrAIn STrucTureSeAMleSS eXTruSIonGround PolISHed fInISH
Code Size x 5Kg +GST Inc lus iveXA316LSI -10T 1.0mm $137.39 $158.00 XA316LSI -16T 1.6mm $ 105.22 $121.00XA316LSI -20T 2.0mm $ 113.04 $130.00XA316LSI -24T 2.4mm $ 113.04 $130.00
STAInleSS STeel TIG wIre 316lSiID STAMPED BOTH ENDS - INTERNATIONAL APPROVALS
INDUSTRIAL GAS REGULATORS
OXYGEN - XG-OXYLGACETYLENE - XG-ACELGLPG - XG-LPGRG
XCEL- GAS
XCEL- GAS
Xcel-Gas regulators are reliable affordable high performance regulators independently tested and compliant to AS4267
• All Positions • Welds Galvanised Steel • Excellent Finish • Site Welding • Smooth Arc • Self Lifting Slag • Great Price
GenerAl PurPoSe elecTrodeS
Code Product Desc r ip t ion +GST Inc lus iveXAGP25 XAGP E lec t rode 2.5mm x 2.5kg Pkt $18.26 $21.00 XAGP32-25 XAGP E lec t rode 3.2mm x 2.5kg Pkt $18.26 $21.00 XAGP32 XAGP E lec t rode 3.2mm x 5.0kg Pkt $27.83 $32.00
XAGP40 XAGP E lec t rode 4.0mm x 5.0kg Pkt $26.96 $31.00
GAS SHIelded fluX-cored MIG wIre
XC-712121.2mm x 15kg Spool
e71T-1 fluX core MIG wIrePrecision layer wound - vacuum Sealed• Smooth Arc Transfer • Low Spatter• Fast Freezing Slag • All Position Welding• Smooth Bead Finish • CO² & Mixed Gas • International Approvals
Xc-712 x 1.2mm x 15kg Spool
$92.00 GST Incl.
$80 00
$110.00 GST Incl.
$95 65
$65.00 GST Incl.
$56 52
$40.00 GST Incl.
$34 78$29.00 GST Incl.
$25 22$52.00 GST Incl.
$45 22$50.00 GST Incl.
$43 48
$103.00 GST Incl.
$89 57$99.00 GST Incl.
$86 09
$92.00 GST Incl.
$80 00$92.00 GST Incl.
$80 00
6
Cutting DisCs inoxFor cutting stainless steel rust and acid proofed steels, hardox, hardened steels, high alloyed steels, high tensile steels, galvanized parts. Made in Germany.
Code Model +GST InclusiveDISC-XT10-100 100 x 1.0 x 16mm $2.17 $2.50DISC-XT10-115 115 x 1.0 x 22.23mm $2.35 $2.70DISC-XT10-125 125 x 1.0 x 22.23mm $2.61 $3.00DISC-XT10-180 180 x 1.5 x 22.23mm $3.91 $4.50DISC-XT10-230 230 x 1.9 x 22.23mm $4.43 $5.10
WELDing BLAnKEtWB6636-5180Carbonized Acrylic felt welding blanket – great for use in the automotive industry. Protects cars windows and metal from fling sparks. Wilsons Panther felt pads are fire and heat resistant, made of carbon fibre, this welding felt is designed to withstand temperatures of up to 1648 degrees C. 1800 x 1800mm.
go-sPECs ii WELDing sHADE 5 LEns GG-45WS5AF
Soft closed cell foam fills gaps between face and lens.
Choose between a strap or sidearms. Flame retardant foam
and strap. Supercoat™, antifog lenses.
WELDing CuRtAin RED WC-6636-25Maintains good visibility in and out of welding booths while minimising the arc glare. 1800 x 1800.
DisPosABLE mAsKs P2 JS-823MLBGood disposable option provide protection against welding fumes and odour. Exhalation valve provides greater wearer comfort. The construction of the mask provides good fit and protection and will not lose shape. Box of 10.
tig WELDing gLoVEsW-TIG Full pigskin palm. Split pigskin cuff. 300mm long
$81.00 GST Incl.
$70 43
$44.80 GST Incl.
$38 96
$41.40 GST Incl.
$36 00
$10.50 GST Incl.
$9 13
$27.00 GST Incl.
$23 48
$69.00 GST Incl.
$60 00
$189.00 GST Incl.
$164 35 BACK HANDPAD
BACK HANDPAD
WELDERs FiRst AiD KitFAK209116Unitized boxes for easy identification and refill.
DuAL ADHEsiVE systEm6121705 Repair most anything. Bonds plastics, metals, and rubber in seconds. Fills cracks, gaps and holes. Will not dry out in bottle, guaranteed for 12 months.
ELECtRiCAL LEADs2.5mm cable, Limited voltage drop.
EL10A30 10amp. 30m.
EL15A3015amp. 30m.
$127.00 GST Incl.
$110 43$127.00 GST Incl.
$110 43
7
AngLE gRinDER 125mmG13SR3Heat resistant, high powered 730w motor. Strong alloy gearbox.
AngLE gRinDER 125mmG13SB3Super heavy duty 1300w. This high powered, compact angle grinder offers superior performance in a small package. Ideal for heavy duty workshop use where one handed operation is a requirement.
Cut oFF sAWCC14SF2000w motor, quick release vice, spindle lock, capable of cutting shaped steel up to 130 x 130mm.
HEAVy Duty DRiLL 13mmD13VB32 speed variable and reversible, 790w motor
AngLE gRinDER 125mmG13YC2Full Spec, 125mm Electronic Safety Angle Grinder. 1500w motor with full range of electronic protection features & paddle switch.
AngLE gRinDER 230mmG23MR 2400w motor. Cybernetic body features super-tough alloy outer casing with a double insulating polycarbonate layer on the inside. This provides excellent heat dissipation anti-vibration 3 position side handle reduces strain on the operator.
DiE gRinDERGP3VVariable speed, 7000 - 29000rpm. 705w motor.
CoRDLEss DRiLL DRiVER 18VDS18DSDL(GJ)Massive 92Nm of Brutal Power!! Comes with 2 x 5.0Ah Li-ion Batteries. Ultra high capacity for unrivalled run time.
18V CoRDLEss AngLE gRinDER
[BARE tooL]G18DSLNN
New from Hitachi, this brilliant cordless grinder has all the features of a conventional electric
grinder with the added benefit of portability where access to
power is limited.
18V PRo sERiEs HigH toRquE tWin PACKKC18DSDL(GB)Includes Pro Series Driver Drill. Pro Series Impact Driver & 2 x 5.0Ah Li-ion Batteries.Ultra high capacity for unrivalled run time.
CoRDLEss imPACt DRiLL 18V [BARE tooL]WR18DSHLNNMax torque: 480Nm. Convenient rocker switch for forward/reverse. Variable speed and reverse. Ultra-bright LED light to illuminate work area.
$861.00 GST Incl.
$748 70
$689.00 GST Incl.
$599 13
$243.00 GST Incl.
$21130
$425.00 GST Incl.
$369 57
$134.00 GST Incl.
$116 52
$228.00 GST Incl.
$198 26
$389.00 GST Incl.
$338 26
$372.00 GST Incl.
$323 48
$429.00 GST Incl.
$373 04
$285.00 GST Incl.
$247 83
$489.00 GST Incl.
$425 22
ANGLEGRINDER
+FREE5.0Ah Li-Ion
Battery[Via Redemption]
PURCHASE onE of tHESE onE of tHESE =
8
AngLE gRinDER 125mmGA5040C1400w. Super Joint System II developed for effective vibration absorption. Electronic current limiter, speed control and soft start. Anti-restart function. Re-designed durable gear housing. Ergonomically best possible barrel grip.
AngLE gRinDER 125mm9565P1100w. Paddle” SwitchSlim ergonomical design. Heavy duty gearbox. SJS system protects operator if tool is jammed in workpiece.
AngLE gRinDERs 850WSlim motor housing for optimum handling. Die cast aluminium gear housing for strength and heat dissipation.
inox tHin Cut oFF WHEELsSuitable for cutting mild steel
Code Model +GST Inclusive SR9100 100 x 1.0 x 16mm $1.48 $1.70SR9102 100 x 1.6 x 16mm $1.48 $1.70SR9115 115 x 1.0 x 22mm $1.57 $1.80SR9116 115 x 1.6 x 22mm $1.57 $1.80SR9125 125 x 1.0 x 22mm $1.57 $1.80SR9126 125 x 1.6 x 22mm $1.57 $1.80SR9180 180 x 1.6 x 22mm $3.04 $3.50SR9230 230 x 1.9 x 22mm $3.48 $4.00
LARgE Cut oFF WHEELsCode Model +GST Inclusive SR5300 300 x 2.8 x 25.4mm $6.00 $6.90SR5350 350 x 3.0 x 25.4mm $8.52 $9.80SR5400 400 x 3.2 x 25.4mm $11.57 $13.30
gP Cut oFF WHEEL Code Model +GST Inclusive SR4100 100 x 2.4 x 16mm $1.48 $1.70SR4115 115 x 2.4 x 22mm $1.52 $1.75SR4125 125 x 2.4 x 22mm $1.57 $1.80SR4180 180 x 2.5 x 22mm $2.57 $2.95SR4230 230 x 3.0 x 22mm $3.48 $4.00
inox DC WHEELsCode Model +GST Inclusive SR3100 100 x 6 x 16mm $2.09 $2.40SR3115 115 x 6 x 22mm $2.26 $2.60SR3125 125 x 6 x 22mm $2.43 $2.80SR3180 180 x 7 x 22mm $3.74 $4.30SR3230 230 X 7 X 22mm $5.57 $6.40
FLAP DisC FiBRE BACK 60 gRit Fibre backing prevents harsh grinding into workpiece
Code Model +GST Inclusive GAFA10016060 100 x 16mm $8.61 $9.90GAFA11522060 115 x 22mm $10.35 $11.90GAFA12722060 127 x 22mm $11.22 $12.90
sAnDER PoLisHER 180mm9227CBElectronic speed control maintains constant speed under load, critical for a professional finish. Fast and powerful for clear coat finishes. Variable speed with preset stepped speed dial, ideal for ultra slow polishing. Hook and loop for quick paper change.
ABRAsiVE Cut oFF sAW 355mmACS356Can cut round 100mm diameter, square 100 x 100mm, rectangle 130 x 105mm.
Big WiPEs inDustRiAL 80 PACK66 2020One Wipe shifts the lot. Effortlessly clean paint (Oil, water and hammer finish), adhesives, silicone, epoxy, PU Foam, oil, grease and more from hands, tools and surfaces.
stAinLEss stEEL CLEAnER 473mLSG18303This ready-to-use, high-tech formula was created to clean stainless steel surfaces of smudges, streaks, fingerprints, and water stains and protects from spills and daily wear-and-tear.
$24.90 GST Incl.
$2165
$16.90 GST Incl.
$14 70
simPLE gREEn 3.78LSG13052The ultimate non toxic, biodegradable cleaner, degreaser. Comes with a 946ml spray bottle.
$39.00 GST Incl.
$33 91
$287.00 GST Incl.
$249 57
$149.00 GST Incl.
$129 57
$142.00 GST Incl.
$123 48
$487.00 GST Incl.
$423 48$299.00 GST Incl.
$260 00
$215.00 GST Incl.
$186 96
2200Watt
W85-115 115mm
W85-125 125mm
BONUSPOLISH PAD
9
ZinC itA quick-drying zinc-rich coating that offers similar advantages to hot-dip galvanizing. 95% highest purity zinc in the dried film. NZFSA Approved C23.
BRigHt ZinC A quick drying zinc-rich coating for metal protection where a bright galvanized finish is required. More than 50% highest purity zinc in the dried film. NZFSA Approved C23.
5.56 4 LitRE5007Lubricates moving parts for smooth action. Comes with applicator. Breaks through rust and corrosion. Displaces water from wet equipment.Protective film for ongoing corrosion protection.Complete with applicator. NZFSA Approved C14.
stAinLEss stEEL PoLisH 75mLPOLS-075Designed to shine polished stainless steel to an extremely high lustre without scratching.
mEtAL PoLisH 265mLPOLM-1035For all metal surface types. It provides a brilliant high gloss finish. Removes dirt and surface rust in a single treatment leaving a protective coating.
WELD Anti-sPAttER 400mL3358Contains release agents to prevent welding spatter from permanently adhering to metal. NZFSA Approved C12.
Rust ConVERtERA unique fast drying coating formulated to stop rust instantly and prevent future rusting. NZFSA Approved C23.
FLAW FinDER KitY6425433 step process cleaner, dye & developer kit for detecting cracks in welded joints & engineering components. NZFSA & AsureQuality Approved.
$77.70 GST Incl.
$67 57
$29.90 GST Incl.
$26 00
$10.30 GST Incl.
$8 96
CoPPER Anti-sEiZE & LuBRiCAting ComPounDSafe for use on both ferrous and non-ferrous metals.Protects parts up to 982° C. Does not compromise integrity of soft metals. Heat aging won’t affect lubricity of product. NZFSA Approval C12.
niCKEL Anti-sEiZE & LuBRiCAting ComPounD Copper-free formulation - For all metals, especially stainless steel.Protects fasteners and metal surfaces from seizing and galling.High temperature resistance - Protects parts up to +1315°C.NZFSA Approved C12.
RED oxiDE PRimER 400mL2091For long term protection of structural steel and iron. High levels of anti-corrosive zinc components. NZFSA Approved C23.
$13.80 GST Incl.
$12 00$52.90 GST Incl.
$46 00
$27.10 GST Incl.
$23 57$14.00 GST Incl.
$12 17
$11.90 GST Incl.
$10 35
$17.10 GST Incl.
$14 87$19.20 GST Incl.
$16 70$61.00 GST Incl.
$53 04$69.00 GST Incl.
$60 00
$10.60 GST Incl.
$9 22$46.90 GST Incl.
$40 78$27.50 GST Incl.
$23 913147 75ml Tube 3193 500ml Tin 3197 400ml Aerosol
$7.90 GST Incl.
$6 87$32.90 GST Incl.
$28 61$24.40 GST Incl.
$21 223145 75ml Tube 3183 500ml Tin 3195 400ml Aerosol
2087 Bright Zinc 400ml 2187 Bright Zinc 1 Litre2085 Zinc It 350gm 2185 Zinc It 1 Litre
18418 1 Litre 14610 425g Aerosol
10
WiRE WHEELs High performance cable crimped wire, provides a 50% longer lasting brush.
WHEW-1505 150 x 20mm
WHEW-2005 200 x 20mm
WIRE BRushEs
tWist Knot 65mmCode Model +GST InclusiveBRUH-6510 M10 Multi Fit $22.52 $25.90BRUH-6514 M14 x 2 $22.52 $25.90
CRimPED WiRE 75mmCode Model +GST InclusiveBRUH-7510 M10 Multi Fit $24.26 $27.90BRUH-7514 M14 x 2 $24.26 $27.90
BEVEL BRusH 115mm28505055M14 x 2. Designed with a max rpm of 12,000.
PLAtFoRm BRoom786518Dense java fill 1.35m handle.450mm wide.
WELDing & Cutting Kit oxy/ACEtyLEnEWCD9011PAWelds to 10mm (size 20 tip) and cuts to 150mm. Comes with flashback arrestors.
WELDing & Cutting Kit LPgWCD9011LPComes with flashback arrestors.
mini muLti AngLE mAgnEtMAGM-MS346AT59 x 51 x 16mm. 10kg pull. Holding at multiple angles while soldering, brazing and welding at 30°, 45°, 60° and 90°.
unBREAKABLE g CLAmPsMade from UNBREAKABLE SG Iron. Deep threads give smooth, slip free operation.
mAgnEt squAREMAGS-MS45111 x 95 x 19mm. 30kg pull force.
$32.00 GST Incl.
$27 83
$29.00 GST Incl.
$25 22
$11.90 GST Incl.
$10 35
$23.90 GST Incl.
$20 78$27.90 GST Incl.
$24 26
$29.00 GST Incl.
$25 22
$22.00 GST Incl.
$19 13
$5.30 GST Incl.
$4 61
$12.50 GST Incl.
$10 87
$48.50 GST Incl.
$42 17
$42.00 GST Incl.
$36 52
$21.50 GST Incl.
$18 70
$49.90 GST Incl.
$43 39
WELDing mAgnEtsMagnetic blocks used when welding sheet metal and pipes etc. For welding and mounting work at 90° or 45° angles. Intended for both flat and round work pieces.
®
®
sCRAtCH BRusHEsWith plastic Handles224324 Steel 28 gauge wire.
225223 316 Stainless Steel
CLAG-SG205 205mm CLAG-SG245 245mm CLAG-SG305 305mm
MH75 120 x 82mm
MH90 120 x 100mm
MH75
MH90
$399.00 GST Incl.
$346 96 EA
MINIHEARTH BRUSH
100mmBEVEL BRUSH
11
WELDing tABLETABW-TS3020760 x 510mm. Corner guides for easy set up.
unBREAKABLE ViCEsUnbreakable SG Iron
VisE gRiPs 150mm
VisE gRiPs 275mm
VisE gRiP 75mmT7CR Standard
LoCKing PLiERs
T6R Standard C Clamp
T11R Standard C Clamp
406 275mm C Clamp
T6SP C Clamp with Swivel Pads
T11SP C Clamp with Swivel Pads
406SP C Clamp with Swivel Pads
LoCKing PLiER PACKT544TIncludes 2 x 275mm Welding Clamps, 2 x 150mm Welding Clamps1 x 250mm standard Vise Grip.
VisE gRiP sEt 3PCT323SContains 150mm long nose. 175 & 250mm standard vise grips.
mAgnEtiC BAsE DRiLLHMPR035920w motor. Weighs just 10kg.Capacity of 35mm diameter & 52mm depth of cut.
g-CLAmPsFrames are stressed and shaped to absorb tensions and compressions well within the limit from the material from which they are made.
Code Model +GST InclusiveT120/6 150mm $27.83 $32.00T120/8 200mm $39.13 $45.00T120/10 250mm $56.52 $65.00T120/4 100mm $20.52 $23.60T120/12 300mm $84.00 $96.60
sWitCHABLE mAgnEtiC HoLDERTQ8027Heavy duty design. Super strong magnet (on/off switch). Suitable for straight, 90deg, 45deg & curved steel.
mAgnEtiC BAsE DRiLLHMPR040Featuring an 1020w Motor, Powerful Dual Coil Magnet, Capacity of 40mm Diameter & 52mm Depth of Cut. The ability to easily accept twist drills up to 13mm using the optional chuck & adaptor.
$59.90 GST Incl.
$52 09
$29.90 GST Incl.
$26 00
$27.60 GST Incl.
$24 00
$48.00 GST Incl.
$41 74
$26.00 GST Incl.
$22 61
$32.80 GST Incl.
$28 52
$52.00 GST Incl.
$45 22
$31.00 GST Incl.
$26 96
$59.00 GST Incl.
$5130
$199.00 GST Incl.
$173 04$183.00 GST Incl.
$159 13$229.00 GST Incl.
$199 13
$210.00 GST Incl.
$182 61
$1,499.00 GST Incl.
$1,303 48$1,999.00 GST Incl.
$1,738 26
VICB-MSG05 125mm VICB-MSG06 150mm
VISE-GRIPT SHIRT
®
12
WELDing CARtTQ6030Sturdy Steel Construction. Ideal for Arc/Mig Welders and Gas Bottle. Top Tray – 500(L) x 320(W)mm. Bottom Tray – 660(L) x 320(W)mm
tRADE HACKsAW225-PLUSRobust frame Blade can be locked at 55° or the conventional 90° position. Blade storage section.
WELDERs CHiPPing HAmmERsSturdy, alloy steel are heat treated for long life. Come with a tough plastic handle.
JumBo PRy BAR 780mm301070Made from alloy steel and comes with a hand grip.
muLti PuRPosE mig PLiERsTQ9058Specifically designed for CO2 Welding Torches. 200mm, spring loaded with vinyl handle. SPE1487
Locking Plier 250mm
tRADE HACKsAW325Centred blade for correct balance and spring tensioned blade loading mechanism for quick blade changes.
WELDing ViCE 125mmWVF125Fits all shapes and sizes of steel for right angle welding. Copper thread for conductivity.
ADJustABLE PRy BAR301186Adjusts 540 - 810mm. Podger end designed for aligning and prying.
PRy BAR sEt RoLLED HEAD
301673Chrome vanadium steel fully hardened and heat treated. 150, 300, 400, 500mm.
mAgnEtiC sWEEPER 610mmTQ1167
Pick up metal shavings & other ferrous objects up to 14Kg.
$99.00 GST Incl.
$86 09
$139.00 GST Incl.
$120 87
HOTPRICE
GREATVALUE
NOGAEDGE OFF
$19.90 GST Incl.
$17 30
SPE1488 Locking Plier C Clamp 275mm
sELF LoCKing PLiERsAutomatically lock on any size without adjusting. 15% thinner handle for easier grip and more power. No pinch easy squeeze release lever stays locked until you release it. Set & Forget” Set desired clamp pressure, from slight to extreme and jaws. Automatically adjust to any size with equal grip pressure.
NOGAEDGE OFF
$63.00 GST Incl.
$54 78
$59.00 GST Incl.
$51 30
$39.00 GST Incl.
$33 91$69.00 GST Incl.
$60 00
$87.00 GST Incl.
$75 65
$59.00 GST Incl.
$51 30
$39.90 GST Incl.
$34 70
$33.00 GST Incl.
$28 70$35.00 GST Incl.
$30 43
$47.00 GST Incl.
$40 87
$119.00 GST Incl.
$103 48
PRyBAR sEt 4PC2484/S4With sizes 200, 300, 450, 600mm.
MA37002 12oz MA37003 16oz
13
FLExiBLE RuLE 600mm321901You can bend this right around so that the ends touch making it ideal for measuring round bar stock. Graduations on both upper and lower edges with numerical markings in centre only. Made in Japan!
tRADEsmAn RADioUT-1000SPLASH PROOF AM-FM RADIO 12 VOLT / 9 WATT RMS.AM/FM analog radio.Water resistant.Built Trade Tuff.Function switch power off/radio/AUX.High sensitivity, excellent sound performance.Built-in AC power cord (2.25 mtr).12V DC jack.Can be powered by D size batteries.
DigitAL inCLinomEtER 150mmLS160With a pipe groove and magnetic base. Accurate to +/- 0.1 degrees. Audible alarm which beeps faster as you get closer to horizontal becoming a continuous tone. Measures in degrees and percentage.
tAPE mEAsuREsGrip holds on this model. All metallic components are made from Stainless Steel. Nylon coated blade.
KL905-120 1200mm KL905-180 1800mmConDoR LEVELsProguard finish delivers superior corrosion protection. OPTI-VISION Red horizontal vial creates highly visible red bubble edges, for exact placement between the reading lines and optimal vision in low light.
VEntiLAtion FAnTQ1025300mm diameter. 520 watt, 5 meter flexible tube. Air delivery - 60/70 M3 Min. Ideal for welding, workshops, basement ventalation.
toRPEDo LEVELLS164-3
With three perpendicular beams, and four vials at 45°, 90° and 180° (2 vials). This level has a v groove magnetic base for
attaching to pipe or flat steel, and a levelling plate for use on flat surfaces.
toRPEDo LAsERLS164-1
With a laser dot/vertical/horizontal line. Adjustable bubble for recalibration, magnetic base and soft bag. Accuracy 1 mm in 5 meters.
tooLBox LEVEL 250mmKL724
Accuracy: 0.5mm/m.Two solid acrylic shockproof vials
sAnD BLAsting CABinEtTQ3009Bench Top Model with Top Opening Door.4 Ceramic Nozzle Tips - 4.5, 5.0, 6.0 & 7.0mm (ID).Additional Transparent Shields. CFM 5 @ 80 psi (Optimum Operating).Complete with Gun, Gloves, Thread Tape. Dimensions 520(H) x 640(L) x 510(W)mm.
Auto LoCK tAPE mEAsuRE 8mTA378525mm wide. Features bottom lock for easy blade contol.
$325.00 GST Incl.
$282 61
HOTPRICE
$68.50 GST Incl.
$59 57
$12.90 GST Incl.
$11 22
$18.90 GST Incl.
$16 43
$69.00 GST Incl.
$60 00
$29.00 GST Incl.
$25 22
$95.00 GST Incl.
$82 61
$39.00 GST Incl.
$33 91
$45.00 GST Incl.
$39 13
$159.00 GST Incl.
$138 26
$147.20 GST Incl.
$128 00$145.00 GST Incl.
$126 09
$499.00 GST Incl.
$433 91
TA3375 5m x 19mm TA3380 8m x 25mm
14
FLooD LigHt tRiPoD 160LEDQ1148600 Lumens. 2 - 3 Hours work time. Fold out tripod. 3 metre cable. 240V power & charger. Rechargeabale lithium battery - 7.4V 220mah.qest@ LED Lights feature impact resistant casing that is dust and splash proof (IP44). 5mm white LED’s giving up to 100,000 hours life. Unlike Halogens LED work lights remain cool to touch with no heat generated. Full compliance to AS/NZ Electrical Standards.
WoRKLigHt 20W EPistARQ11971600 Lumens.LP44 rated (dustproof, waterproof, splashproof). Adjustable light angle – vertically & horizontally. 7.4V 8800mah rechargeable lithium battery.
HyDRAuLiC PiPE BEnDER022Solid Construction. Supplied with 6 Formers 1/2 to 2”. Pipe Capacity 2mm Wall Thickness.
gRAVity ConVEyoRsComplete with adjustable stands and steel rollers.
CGL1P3450STS 1500 x 450mm150mm pitch. 2 stands.
CGL3P3450STS 3000 x 450mm150mm pitch, 3 stands.
sWiVEL BLoW toRCH KitJP211056360° Hands Free Swivel Arm with Auto Ignition.Disposable MAP/PRO™ Cartridge 399g.Solders 3.18 to 76 mm (1/8 - 3 ”) Copper Pipe.Brazes 1.5 to 25.4 mm (1/16 - 1 ”) Copper Pipe.
BLoW toRCH KitJP211334With pinpoint burner. Adjustable flame.Solders to a max. pipe dia. of 6mm.
no 1 AngLE BEnDER062
Capacity: Flat Bar: 80mm x 6mm or 60mm x 8mm. Square: 20mm x 20mm.
migHty tougH HAnD tRoLLEyMTR100Puncture proof wheels. Heavy duty 300kg capacity.
$113.90 GST Incl.
$99 04
$72.50 GST Incl.
$63 04
$280.00 GST Incl.
$243 48
$299.00 GST Incl.
$260 00
$217.00 GST Incl.
$188 70
$918.00 GST Incl.
$798 26
$918.00 GST Incl.
$798 26
$566.00 GST Incl.
$492 17
$1,339.00 GST Incl.
$1,164 35
HEAVYDUTY
SOLIDCAST
gAs toRCH KitGAST-TS4000TKSuitable for Propylene & Propane fuel. Lock button keeps torch lit for finger free use. Instant on/off trigger igniter with simple one-handed operation. Cast aluminium body for durability.
$137.00 GST Incl.
$119 13
15
DRiLL sEt2007-M21 - 10mm.0.5mm rises. HSS.
DRiLL sEt mEtRiC174971TZ25 HSS drills 1.0 - 13.0 x 0.5mm rises.
tAP & DiE sEtM500M16Includes taps and button dies 3 - 12mm, plus tap wrenches.
nogA sEtNOSP1007For deburring, cleaning, finishing and countersinking.
DRiLL sEts
DRiLL sEt mEtRiC175097Contains 25 sizes: 1mm to 13mm drills in 0.5mm rises.
DRiLL sEt mEtRiC 25PCSPE15031 - 13mm in 0.5mm rises. For drilling metal, wood or plastic.
CARBiDE BuR sEt 5PC918CRSET5MMade from solid carbide (K30) Shank = S45C Steel. The double cut bur allows for rapid stock removal in harder materials.
nogA DEBuRRERNONG8350Deburrs steel, aluminium, plastic, brass and cast iron.
$63.00 GST Incl.
$54 78
$113.90 GST Incl.
$99 04
$43.50 GST Incl.
$37 83
$95.20 GST Incl.
$82 78
$37.00 GST Incl.
$32 17
$165.00 GST Incl.
$143 48
$127.00 GST Incl.
$110 43
$188.00 GST Incl.
$163 48
8 METRETAPE
MASONRY DRILL SET
NOGA
NOGA
HoLEsAW sEt quiCK CHAngEBLQC7065-S19 Holesaw sizes 6 – 60mm plus an extra pilot drill and a universal quick change chuck to suit 1/4’’ & 3/8’’ hex shanks.
$219.00 GST Incl.
$190 43DRILL SET
SCRIBER
EnginEERs squARE sEt 4PCGZ01011Hardened spring steel blades. Precisely ground stock and blade. 50, 100, 150mm.
$99.00 GST Incl.
$86 09
$19.90 GST Incl.
$17 30$45.00 GST Incl.
$39 13$89.00 GST Incl.
$77 39
BL-M1 11pc1 - 6mm x 0.5mm increments
BL-M2 19pc1 - 10mm x 0.5mm increments
BL-M3 25pc1 - 13mm x 0.5mm increments
NOGA
16
ComBinAtion squARE 300mm267CS3030Stainless steel. With mitre square, spirit level, plumb level, 45degree level, height gauge. Straight edge and scriber.
mAgnEtiC BAsEsAccepts dial indicators and DTI’s. With on/off switch.
DiAL tEst inDiCAtoR513-404E Range 0.8mm grads 0.01mm. Dial reading 0 - 40 - 0. Face dia. 39mm.
HooK & sCRAPER sEt301008BPContains multi purpose scraper 285mm, multi purpose scraper 210mm, scratch awl 200mm, cotter pin puller 225mm, radiator hose remover 175mm.
tooL BACKPACKTIR-22419-RConstructed from lightweight 600 denier polyester material for strength and durability and comfort. Perfect for carrying tools when accessing hard to reach work sites. Twelve exterior webbed loops for tools and fasteners and a snap hook for attaching key chains. Eleven interior pockets as well as multiple zippered compartments for extra storage.
BACK PACK tooL stoRAgETIR-5000Perfect for carrying tools when accessing remote job sites. Multiple exterior pockets and twelve interior pockets for tools and fasteners. Digital audio pouch with an earphone slot.
DiAL inDiCAtoR2046S10mm x 0.01mm with accuracy certificate.
PRotouCH REtRACtABLE KniFET1774106Safe lock system to prevent blade from slipping during use.
sCAFFoLDERs LEVEL 250mmST81SM-250
250mm long with magnets in base. Milled working face. Pressure die-cast light alloy body.
Highly shock absorbent.
PiCK uP tooLULHT-2Lifts 3.5lbs without powercap. Powercap on increases lifing power by 45%. Telescopes 168 - 831mm.
PiCK & HooK sEt2633/S4Miniature awls, hooks and picks for scribing, alignment, O-ring removal, piercing holes in leather or fabrics and for cleaning nooks and crannies.
$75.00 GST Incl.
$65 22
$39.00 GST Incl.
$33 91
$17.40 GST Incl.
$15 13
$73.00 GST Incl.
$63 48
$36.00 GST Incl.
$31 30
$35.00 GST Incl.
$56 52
$16.00 GST Incl.
$13 91
$89.00 GST Incl.
$7739
$129.00 GST Incl.
$112 17
$142.00 GST Incl.
$123 48FLAT
SCRAPER
HEx KEy sEt 2PCT22199Proguard Finish delivers superior corrosion protection. Metric & imperial sets.
$34.50 GST Incl.
$30 00
HOTPRICE
GREATVALUE
EASY BLADE
CHANGE
Magnetic Bases & DiaL inDicatORs
$65.50 GST Incl.
$56 96$69.00 GST Incl.
$60 00
7010S-10 Standard
7011S-10 Fine Adjustment
17
stoRAgE ComBo 2PCRS53569 drawer Tool Chest & 7 drawer Roll Cabinet.
PRoFEssionAL tooL CHEst 8DWR RMS61571042 W x 449 D x545 H mm. Ball-bearing slides on each drawer. Internal lock system.
FoLD uP tooL BoxKT874023 Section Fold Up Tool Box. Tubular handle, curved hinge and flangereinforced design. 255 x 470 x 220mm.
soCKEt sEt 39PCKT2539MR6pt 1/4” Drive Std Sockets: 4 - 13mm, Torx Bits: T8-T40, Hex Bits: 3-10mm, Star Sockets: E4-E8.
PRoFEssionAL RoLLER CABinEt 11DWRRMS61581065 W x 460 D x 975 H mm. Ball-bearing slides on each drawer. Internal lock system.
soCKEt sEt 23PCKBT27591/2” drive ranging 10 - 32mm.
1/2” DR soCKEt sEt 25PCKT4226MR02Ranges 10 - 32mm with standard accessories. 1/2” drive.
soCKEt sEt 26PCGCAD26083/4” Drive. Ranging 22 - 50mm & 7/8” - 2”.
$111.00 GST Incl.
$96 52
$113.00 GST Incl.
$98 26
soCKEt sEt 39PCKBT27603/8” drive ranging 6 - 22mm & (Deep) 10 - 14mm.
$109.00 GST Incl.
$94 78
$899.00 GST Incl.
$781 74
$1,147.00 GST Incl.
$997 39$840.00 GST Incl.
$730 43
$573.00 GST Incl.
$498 26
soCKEt sEt 43PCGCAD43031/2” Drive.Ranging 8 - 32mm & 3/8 - 1.1/4”.
$239.00 GST Incl.
$207 83
$420.00 GST Incl.
$365 22
$239.00 GST Incl.
$207 83
$120.00 GST Incl.
$104 35
8PC 1/2” DR DEEP SOCKET
SET
POWERBUILT CAP
BIGDEAL
tooL sEt 99PCGCAZ0038
3 Draw Tool Box with Lift Up Lid1/4” Drive Socket Set 4-13mm
1/2” Drive Socket Set 10-32mmCombination & double ring spanners
Screwdrivers, pliers, circlip pliers, hex keys.
Solid Construction
18
soCKEt sEt 35PC3279AM3/8” Drive ranging 5/16 - 7/8” & 9 - 22mm.Made in Japan.
soCKEt sEt 36PC4279AM1/2” Drive ranging 3/8 - 1.1/4” & 10 - 32mm. Made in Japan.
ADJustABLE WREnCHEsCode Size +GST Inclusive644040HS 150mm $11.91 $13.70644041HS 200mm $15.48 $17.80644042HS 250mm $18.70 $21.50644043HS 305mm $27.83 $32.00940208HS 380mm $51.30 $59.00WES5011 450mm $80.00 $92.00WES5012 600mm $126.09 $145.00
soCKEt sEt 23PC527-71231/4” drive ranging 4 - 12mm & 3/16 - 7/16”.
RoE sPAnnER sEt 26PCKT1226MR6 - 32mm.
sPEED WREnCH sEt 12PCKT12112MR8 - 24mm. For fine movement of fasteners with 5 degrees of movement increments.
soCKEt sEtS140TThe new Bahco Go-Thru drive system allows good accessibility in confined spaces and to long screws. Comes with a high quality 72 teeth reversible ratchet with two component (flex) handle. 10 - 24mm.
soCKEt sEt 33PC527-83333/8” drive ranging 6 - 22mm & 1/4 - 7/8”.
ADJustABLE WREnCHEsFeatures an adjustable jaw that allows the tightening and release of both pipes and bolts and nuts.
Code Size +GST Inclusive 9070P 150mm $33.83 $38.909071P 200mm $41.30 $47.509072P 250mm $54.35 $62.509073P 300mm $66.00 $75.90
ADJustABLE WREnCHEsChrome alloy steel. Made in Spain. Ole!
Code Size +GST InclusiveIG77-04 100mm $18.26 $21.00IG77-06 150mm $19.04 $21.90IG77-08 200mm $22.26 $25.60IG77-10 250mm $28.52 $32.80IG77-12 300mm $38.70 $44.50IG77-15 375mm $68.70 $79.00IG77-18 450mm $106.52 $122.50IG77-24 600mm $260.00 $299.00IG771-30 750mm $458.26 $527.00
stARtER tooL sEt 119PCKT911-StarterSee in store for a full listing. Made in Taiwan.
$91.00 GST Incl.
$79 13$114.00 GST Incl.
$99 13
$59.00 GST Incl.
$51 30
$309.00 GST Incl.
$268 70$343.00 GST Incl.
$298 26
$319.00 GST Incl.
$277 39
$999.00 GST Incl.
$868 70
$331.00 GST Incl.
$287 83
11 PIECEROE SPANNER
SET
STUBBY SPANNER
SET
2 CANS OF COCA COLAWITH EVERY WRENCH
GREATVALUE
19
sCREWDRiVER sEt 31PCWST6068Comes with slotted, phillips, pozidrive screwdrivers, magnetic pick up and a range of screwdriver bits.
sCREWDRiVER sEt 14PCKT35114MR01With phiilips and flat tip screwdrivers.Includes an insulated screwdriver.
RigHt AngLED DRiVERFTGC08081:1 speed rotation. Allows easy access into tight corners. Quick change chuck. Use with screwdriver bits, hex drills etc.
HEx DRiVE Bit sEt 31PCGABW3103Handy set of popular bits. 1/4” hex mini Bit Ratchet. Includes flat, phillips, pozi, square, torx & hex bits.
sCREWDRiVER sEt 10PC605-10-PC-AUWith phillips, flat tip and robertson.
sCREWDRiVER sEt 13PC108-0013With slotted, phillips, pozi and robertson screwdrivers.
Bit sit 40PCGAAD400210mm hex bits. Selection of 30mm & 75mm long bits. Selection of Spline, Hex, Star bits. 3/8” & 1/2”. Quick change bit holder.
AttACK DRiVERAN112AHeavy duty attack driver complete with case and 4 bits.
$86.30 GST Incl.
$75 04$69.90 GST Incl.
$60 78
$39.90 GST Incl.
$34 70
mini RAtCHEt sEt 15PCKT2515MRWith a popular range of bits and a mini ratchet.
$31.10 GST Incl.
$27 04
$45.00 GST Incl.
$39 13
$43.00 GST Incl.
$37 39
$94.70 GST Incl.
$82 35
$91.00 GST Incl.
$79 13
$43.90 GST Incl.
$38 17
A child asked his father, “How were people born?” So his father said, “Adam and Eve made babies, then their babies became adults and made babies, and so on.” The child then went to his mother, asked her the same question and she told him, “We were monkeys then we evolved to become like we are now.” The child ran back to his father and said, “You lied to me!” His father replied, “No, your mom was talking about her side of the family.”
MADE IN GERMANY
20
oFFsEt AViAtion sniP sEtMW6510-SET2Left and right hot drop forged snips for strength and durability. Made in USA.
AViAtion sniP sEt MW6716-SET3Hot drop-forged molybdenum alloy steel blades for strength,durability. and longer lasting cutting edge life * Soft grips * Made in the U S A.
Long Pin PunCH sEt 8PCM701PP8L Contains 8 long series pin punches 2.5 - 10mm.Long Series Pin Punches for machine shop and motor service work. These Long Series pin punches are extra-long, measuring 200mm. The bodies are 113mm and the drive pin sections are 88mm long. They are well proportioned, hardened, properly tempered and have a knurled grip.
Pin PunCH sEt 8PCRTP8Contains 3mm taper punch, and 2, 3, 4, 5, 6, 7, 8, 10mm x 150mm Pin Punches.
tRADE PLiERsTaiwan made Trade pliers.
Code Model +GST InclusiveKT6311-06 Long Nose 163mm $16.96 $19.50KT6311-08 Long Nose 203mm $21.74 $25.00KT6211-06 Diagonal 163mm $16.96 $19.50KT6231-08 Diagonal 200mm $21.74 $25.00KT6111-06 Linesman 163mm $16.96 $19.50KT6111-08 Linesman 213mm $21.74 $25.00KT6411-06 End Nipper 165mm $21.74 $25.00
gERmAn tRADE PLiERsCode Model +GST Inclusive
NWS14062-205 Long Nose 205mm $48.00 $55.20
NWS109262-225 Combination Plier 225mm $48.00 $55.20
NWS13862-200 Side Cutter 200mm $48.00 $55.20
NWS165112-300 Waterpump Plier 300mm $60.00 $69.00
AViAtion sniPsCut low carbon cold rolled streel. Non-slip serrated jaws are made from waer resistant molybdenum steel.WS1 WS1 Right CuttingWS2 WS2 Left CuttingWS3 WS3 Straight Cutting
CoLD CHisEL sEt 3PCRCC3With sizes 150, 200, 250mm.
BALL PEin HAmmERsWith hickory handles for a long working life.
Code Size +GST InclusiveH328 4oz $12.43 $14.30H330 8oz $14.52 $16.70H332 12oz $17.39 $20.00H334 16oz $20.78 $23.90H336 24oz $27.13 $31.20H338 32oz $28.26 $32.50H340 40oz $30.43 $35.00
PunCH & CHisEL sEt 11PCRCP11Set of 3 cold chisels & 8 punches
$92.00 GST Incl.
$80 00$99.00 GST Incl.
$86 09 $45.90 GST Incl.
$39 91
$69.00 GST Incl.
$60 00
$59.00 GST Incl.
$5130
$52.00 GST Incl.
$45 22 EA
$149.00 GST Incl.
$129 57
21
BoLt CuttERsChrome molybdenum steel jaws. Large super grip handles. PoWERBARs
CFBC12153/8” Drive. 375mm
CFBC16241/2”Drive. 600mm.
CLuB HAmmER 3LB611-2048Fibre shaft & drop forged head.
CiRCLiP PLiER sEt 4PCGPAQ04017” Straight Internal & External, 7” Bent Internal & External. Heavy duty canvas wallet.
LEVER RiVEtERJBAB32644 interchangeable heads. Rivet sizes - 3.2, 4, 4.8, 6.4mm.
BEnCH DRiLL PREssDP305BThe Tooline DP305B Bench Drill Press has a net weight of 34 kilograms, and an overall height of 870mm. The chuck to base measures at 538mm and the chuck to table measures at 413mm.The table size is 245 x 240mm, with the chuck measuring 16mm. The maximum spindle travel is 80mm, and the spindle speeds are 12, 230 - 2470 rpm.The features of the Tooline DP305B Bench Drill Press include an in built light to illuminate workpiece, a fully adjustable table with angle indicator, a cast iron base for added stability, an emergency stop button, a locking depth stop for blind hole drilling and an aluminium motor housing for increased heat dissipation and lighter weight.Compact and lightweight. Ideal for the home or workshop.
gRooVE Joint PLiERs
LoCKing CHAin CLAmP 450mm
DMAB1A18Ideal for turning or holding
awkward shapes.
RiVEtERKT21-20-101Pulls rivets 2.4 - 4.8mm.Industrial quality.
$39.90 GST Incl.
$34 70
$61.00 GST Incl.
$53 04
$79.30 GST Incl.
$68 96
$29.90 GST Incl.
$26 00$23.00 GST Incl.
$20 00
$33.00 GST Incl.
$28 70
$69.00 GST Incl.
$60 00$343.00 GST Incl.
$298 26
$19.10 GST Incl.
$16 61
$39.90 GST Incl.
$34 70
$29.50 GST Incl.
$25 65
$69.90 GST Incl.
$60 78
$51.00 GST Incl.
$44 35
$49.90 GST Incl.
$43 39
400-0113 250mm 400-0114 300mm 400-0117 400mm
315-0270 350mm 315-0275 450mm 315-0271 600mm
22
AiR ComPREssoRAC204040 litre tank, FAD 131LPM, 1500watt (2HP) 2850rpm.
AiR ComPREssoRBigPioneer2652hp. 10bar, 20litre. 7.6cfm, FAD 135lpm.
mini AiR AngLE DiE gRinDER KitGRID-A6314Grinds, deburs, polishes and smoothes rough areas. Ball bearing construction for advanced durability.
HD AiR AngLE gRinDER 125mmGRID-A3042
Light-weight and compact design. Self-locking lever throttle prevents accidental star-ups.
AiR Cut-oFF tooL 75mmTOOC-A2303 Built-in speed regulator and throttle lever. Designed to cut through muffler hose clamps, rusted bolts, fibreglass, sheet metal, etc.
HD AiR imPACt WREnCHWREI-AR36511/2” drive. 400ft/lbs. 5/8” bolt capacity. 4cfm average air consumption.
AiR ComPREssoRSpitfire125011.5cfm, FAD240lpm, 50 litre tank.
AiR HosE AssEmBLiEsCode Model +GST Inclusive
HALF1010A 10m $30.00 $34.50
HALF1020A 20m $51.30 $59.00
HALF1030A 30m $70.43 $81.00
sAnD BLAstERSANB-A3714Gravity feed allows uninterrupted and consistent material flow. Compact and portable with large capacity. (18oz).
HEAVy Duty AiR nEEDLE sCALERSCAA-A4315Light-weight design. Lever throttle control. Excellent for paint, rust, dirt or weld scale removal from irregular and curved surfaces or hard-to-access areas.
AiR RiVEtERW5741-K Pulls 3/32”, 1/8”, 5/32” and 3/16” rivets.
$114.90 GST Incl.
$99 91
$89.90 GST Incl.
$78 17
$87.00 GST Incl.
$75 65
$225.00 GST Incl.
$195 65$269.00 GST Incl.
$233 91
$209.00 GST Incl.
$18174
$199.00 GST Incl.
$173 04
$458.00 GST Incl.
$398 26
$325.00 GST Incl.
$282 61
$899.00 GST Incl.
$78174
5 PIECECUT-OFFWHEELS
HAMMERITE RUSTBEATER
9 PIECEIMPACT SOCKET
SET
10 PACKCUTTING DISCS
23
LEVER ACtion gREAsE gun600ADevelops grease pressures of up to 12,000psi. Delivers up to 1.6g of grease per stroke.
HyDRAuLiC oiL 20LtTellusS2M46Premiun quality, solvent refined & high viscosity.
miCRo toRCH20134Super Bright 21 Lumen ANSI FL1. Light Beam up to 35m. Up to 13.5 Hours operational time. IP67 Water-Proof. 2 x AA size Alkaline Batteries included.
mini toRCH20133
Super Bright 93 Lumen ANSI FL1. Mega Light Beam up to 213m.
Up to 10 Hours operational time. IP67 Water-Proof. 2 x D size Alkaline
Batteries included..
WHEEL DREssERsGZ12070 No 0 - Cutter diameter 1.1/4” (30mm)
GZ12071 No 1 - Dresser Size 11.1/2” (290mm)
BAttERiEs
EnginEERs CHALK 144PCC302100mm long.
FiLE sEt1-478-08-1-2Set of five 8” engineers files in popular cuts with handles.
HEAVy Duty HAnD CLEAnER 2Lt REFiLLSK87045 For extra heavy duty cleaning of grease, oil, ink, and carbon black. Contains all natural biodegradable walnut shell scrubbers.
$83.50 GST Incl.
$72 61
$14.00 GST Incl.
$12 17 EA
$16.90 GST Incl.
$14 70
$25.00 GST Incl.
$21 74
$39.00 GST Incl.
$33 91
$49.00 GST Incl.
$42 61
$63.90 GST Incl.
$55 57
$19.90 GST Incl.
$17 30
$26.50 GST Incl.
$23 04
$171.00 GST Incl.
$148 70
SPARE CUTTERS
CHALKHOLDER
20 LITRE DRUM PUMP
GP GREASE CARTRIDGE
JACK & stAnDs ComBo 3 tonSJG0801Heavy duty 360 degree swivel rear castors. Lifting range 138mm to 495mm. Axle stands Lifting range 285mm to 425mm.
$265.00 GST Incl.
$230 43
23692 6V Lantern
$12.90 GST Incl.
$11 22 EA
23818 AA 24pc23817 AAA 24pc
We are a fair-minded company and try to exceed the requirements of all ‘Fair Trading’ legislation. Prices are current for the period denoted on the cover. Stocks are not always available in all stores all the time but we will try our best to obtain more or equivalent substitutes. Errors and omissions are rare but can happen, so we apologize and try to take all reasonable measures to fix the issue for you.
If you can’t get to us, phone, fax or email and we will send it to you
Fish are smart, sometimes too smart, but the predatory anglers are circling and every so often you have days that are quite simply “mind blowing”.Quiet days are often the result of environmental factors, seasonal fluctuations or missing the change of light early in the morning or late in the evening. In the north the snapper fishing has been challenging and one reason that was suggested to me was a late spawn caused by a slower increase in water temperature.
Yesterday I was part of a charter boat crew out of Auckland and we were plagued by juvenile kingfish. Admittedly we also managed to take home a feed of snapper but we were
surrounded by schools of small kahawai and kingfish.The Captains belief is that it has indeed been challenging but we could be in for a late flurry. Those of us who were able to employed a strayline rig while the beginners utilized the standard ledger rig with a sinker on the bottom and two droppers. The bait selection consisted of pilchards and squid and both were devoured often by small fish.
A handy rule to remember in these situations is “big bait, big fish” and add to that hooks in the 8/0 plus category if you want to avoid an endless process of midgets. The predatory capability of your average angler is enhanced by the array of choices available at the terminal end of your
tackle. I have friends who refuse to fish any other way than with soft baits and others who have tried soft baiting once and given up. My advice is don’t be afraid to experiment and also persevere. New techniques such as the use of soft baits or slow jigs can take time to master. On slow days I add small baits to slow jig hooks and often have great success.Over Christmas my family and I were in the North and I fished in the Bay of Islands. I have several favourite spots in the “Bay” and late one afternoon
we cruised out on to a favoured patch of foul ground. It took me two attempts to get the boat in the right position with the fish behind us, down current and in front of the structure. We anchored, drifted back in to position and I told my cobber to throw out a soft bait before dropping the berley.
He heaved the soft bait out 40 metres behind the stern and put the rod in the holder. As he lowered the berley something grabbed the soft bait. Mr Rod Holder had done it again! It is amazing how often that works and of course Craig will always say it was pure skill.That fish turned out to be a 25 pound snapper that currently sits in the taxidermists freezer.Predatory anglers we may be but it is nice to have a bit of luck. I also had a very good reason to change my outboard motor recently. The other brand was superb and I have always said my choice would be either Yamaha or Honda. Well, I now have a Honda 250HP silver bullet which replaces the other 225. Honda have always claimed significant fuel savings which I confess I treated with some scepticism. The reality is that I am getting a fuel saving of at least 25%. It is massive!
As I sit here I can see my Surtees sitting in the shed and there also sits that big beautiful motor beckoning me to head out and start it up. I get an extra days fishing out of a tank of gas and that is an incentive to hang up the sign that says, “Gone Fishin!”
Tight Lines!
Tackle Talk By Graeme Sinclair