1. ROMEO N. ALBAYALDE ([email protected]) Tools in
PC Hardware Servicing
2. Electrostatic Discharge (ESD) Tools Anti-Static Wrist Trap
is used to prevent ESD damage to computer equipment.
3. Electrostatic Discharge (ESD) Tools Anti-Static Mat is used
to stand on or place hardware on to prevent static electricity from
building up.
4. Hand Tools Flat Head Screwdriver is used to tighten or
loosen screws with slotted heads. Philips Screwdriver is used to
tighten or loosen screws with cross-heads.
5. Hand Tools Torx Screwdriver is used to loosen or tighten
screws with star-like depression on its head. This feature is
mainly found on laptops. Hex Driver is used to loosen or tighten
nuts in the same way that a screwdriver tighten screws. It sis also
called nut driver.
6. Hand Tools Needle-Nose Plier is used to hold small parts. It
is also used to bend, re-position, and cut wires. Wire Cutter is
used to strip and cut wires.
7. Hand Tools Tweezers is used to manipulate small parts. Part
Retriever is used to retrieve parts from locations that is to small
for your hand to fit.
8. Hand Tools Flashlight is used to light up areas in the
system unit that you can not see well.
9. Cleaning Tools Lint-free Cloth is used to clean different
computer parts without scratching or leaving debris. Compressed Air
is used to blow away dust and debris from computer parts without
touching the components.
10. Cleaning Tools Cable Ties are used to bundle cables neatly
inside and outside the system unit. Parts Organizer is used to hold
screws, jumpers, fasteners and other small parts and prevents them
from getting mixed together.
11. Diagnostic Tool Multitester is used to test the integrity
of circuits and the quality of electricity running through the
different components. Loopback Adapter is used to test the
functionality of computer ports.