Cast Iron End Suction Motor Pumps (to EN733) GSD
* All specifications are subject to change without prior notice.* Dimensional details are provided for reference only.
EBARA Pumps Malaysia Sdn Bhd6, Jalan TP3, UEP Subang Jaya Industrial Park,47620 Subang Jaya, Selangor, Malaysia.Tel : 03-8023 6622 Fax : 03-8023 9355Email : [email protected] Website : www.ebara.com.my
EPM GD 0719
Authorised dealer:
PUMP
FEATURES
APPLICATIONS
Cast Iron End Suction Motor Pumps(to EN733) Type GSD
• Water supply & pressure bossting• Building services & cooling towers• Industrial• Irrigation, etc.
RANGE
• 37 pump end sizes• Nominal impeller sizes from 125 to 400mm• 1.5 to 110 kW 2 pole motors• 1.1 to 75 kW 4 pole motors• Discharge sizes from 32mm to 150mm• Flows to 800m3/h; Heads to 150m
A versatile high quality compact close coupled motor pump suitable or many applications where water needs to be transferred or boosted.
• Pump dimensions to EN733• High efficiency hydraulic design (MEI > 0.6 all models)• Cast Iron/Bronze/Stanless steel construction• Compact close coupled design.• SiC/C/EPDM Burgmann seal• Front & rear bronze wear rings• 16 bar casings [to ISO5199] (24 bar hydrostatic test pressure)
• Precision 2 piece stub shaft & hub design• Quality high efficiency WEG motors
CONFIGURATIONS
Pumpsets with motors over 90 frame* are fitted with spacers for ease of installation and maintenance. There are various types and combinations of spacers depending on the model. The motors are bolted to the motor spacers, so that the complete rotating element with motor and spacers is a single rigid assembly that can be “slid” back for ease of maintenance and reassembly.
3A161
Motor spacers
3B
(Solid bar/paint)
3C
4A
162
Front view(Cast iron/paint)
5A162
Front view
Pump spacers(Cast iron/paint)
Motor spacers&
161
5B
Front view
(Solid bar/paint)
1A095
Stay
2A
No spacers
6A
Motor spacer(Folded base)
161
6B
(Folded base/Zn)
GSD4 40-315/4.0 kW* plus
GSD4 100-160/2.2 kWGSD4 100-160/3.0 kWGSD4 100-200/3.0 kW
Applies to 90 frame motors*
095Item
162
161
StayDescription
Folded steelMaterial
PaintFinish
1Qty.
1AApplies to
4A,5A,5B
3B,5B3A,5A
3C6A6B
2,4,6
22211
Pump spacer Cast iron Paint
Motor spacer Folded steel
Steel bar Paint
Paint
Channel (down)Channel (side)BaseplateBaseplate
Rectangular-
-
Style
Zn plated
Zn plated
Zn plated
Specifications: Stays, Motor spacers, Pump spacers
161
162161
161
161
Pump spacers
(Folded Channel/Zn)
(Folded Channel/Zn)
(Folded Channel/Zn)
(Folded base/paint)
GSD4 40-315/4.0 kW* following models use a stay instead of motor spacers
GSD4 100-160/2.2 kWGSD4 100-160/3.0 kWGSD4 100-200/3.0 kW
All models with 90 frame motors (and the 4 models above) have a single stay as
shown on the drawing.Stay
Cast Iron End Suction Motor Pumps (to EN733) Cast Iron End Suction Motor Pumps (to EN733) GSDGSD
PERFORMANCE CHART
SPECIFICATIONS
0.2 0.3 0.4 0.6 0.8 1 2 3 4 6 10
3
456
10
15
20
30
40
60
m³/min
32-200
32-250
50-125
65-125
40-160 50-160 65-160 80-160
100-160
40-200 50-20065-200 80-200
100-200125-200
150-200
40-25050-250 65-250 80-250 100-250
125-250150-250
40-31550-315
65-31580-315
100-315
125-315
150-315
80-400100-400
125-400150-400
1.5
1.5
1.5
1.5
1.5
1.51.5
2.2
2.2
2.2
2.22.2
2.2
2.2
2.2
3
3
3
3
3
3
4
4 4
4
4
4
5.5
5.5
5.5
5.5
5.5
5.5
7.57.5
7.5
7.5
7.5
7.5
7.5
7.5
11
1111
11
11 11
11
1515
15
1515
15
15
18.5
18.5
18.5
18.5
18.5
22
2222
22
22
22
30
30
30
30
30
30
37
3737
37
3737
4545
45
45
45
55
55
55
55
75
75
75
1.1
1.1
1.1
1.1
1.1
1.1
4
4
2
8
50
80 0.1
8 03 0402 80 200 400 600 800300100606 01
2 6 8 10 20 30 60 80 100 200403 4
m³/h
l/s
mTo
tal H
ead
Capacity
GSD 4P 50 Hz1500 RPM Synchronous
speed
m³/min
10020 40 60 80 200 400 600
4 6 8 10 20 40 60 80 100 200
0.2 0.3 0.4 0.6 0.8 1 2 3 4 6 10
8
10
15
20
30
40
60
80
100
150
4
35.5
5.5
5.5
7.5
7.5
7.5
7.5
9.2
9.2
9.29.2
11
11
11
11
11
15
15
15
15
18.518.5
18.518.5
18.5
22
2222
3030
30
30
37
37
37
37
45
45
45
55
5555
75
11
15
30
37
75
9090
110
1.51.5
2.2
2.2
4
4
3
3
3
5.5
5.5
5.5
7.5
9.2
11
11
15
15
18.5
18.5
18.5
22
22
30
30
3037
37
45
45
45
55
55
55
55
75
75 75
75
75
75
75
90
90
90
110
110
110
110
80-250
100-160
100-200
100-250
125-200
150-200
32-125
32-160
32-200
32-250
40-125
40-160
40-200
40-250
40-315
65-125
50-160
65-160
50-20065-200
50-250 65-250
50-315
80-160
80-200
65-315
50-125
m³/h
l/sCapacity
mTo
tal H
ead
GSD 2P 50 Hz3000 RPM Synchronous
speed
Model code: 80-250Discharge size - mm Nominal impeller diameter - mm
Supplied as standard with spacers and/or
supports where required.
Available mounted on a galvanised steel baseplate.
Configuration with motor spacers, pump spacers, and/or stays varies depending
on pump/motor combination.
The GSD is a versatile high quality compact close coupled motor pump, and with 237 pump end/motor combinations available there are models suitable for many applications and duties wherever water needs to be transferred or boosted.
Standard OptionPump Type Close coupled end suction motor pump
to EN733 (Pump end dimensions)#
Flanges DIN/EN PN 16 (EN 1092-1)
Scope Pump discharge 32 mm to 150 mmMotor power 2 Pole: 1.5 to 110 kW
4 Pole: 1.1 to 75 kW
Performance 2 pole: (Q) 8 - 800 m³/hr (H) 10 - 150 m hd4 pole: (Q) 4 - 650 m³/hr (H) 3 - 70 m hd
Type Water
Temperature -10° to +120°C
Max. allowable working pressure (MAWP) 16 Bar*
Max. allowable suction pressure (MASP)** <16 Bar-Pump shut-off pressure (PSP)
Construction Impeller Closed centrifugal
Shaft Stub shaft & hub
Mechanical seal Single spring, rubber bellows (to EN12756)
Materials Casing Cast iron (FC250)
Impeller
Casing wear ring
Bronze (CAC 406)
Bronze (CAC 406)
Shaft 420 Stainless steel (wetted part)
Mechanical Seal SiC/Carbon/EPDM
Back cover Cast iron (FC250)
Motor bracket Cast iron (FC250)
Spacers Refer page 11
Motor Type WEG W21
Efficiency Std IE3 (or E2)
Enclosure IP55
Insulation class Class F
Motor frame material Aluminium Cast Iron Supply Motor pump c/w spacers where required. On galvanised steel baseplate
** MASP < MAWP - PSP
Liquid handled
* 16 Bar rating to ISO5199
(up to 200 Fr.) (225 Fr. & above)
# Except model 150-315
Cast Iron End Suction Motor Pumps (to EN733) Cast Iron End Suction Motor Pumps (to EN733) GSDGSD
PERFORMANCE CHART
SPECIFICATIONS
0.2 0.3 0.4 0.6 0.8 1 2 3 4 6 10
3
456
10
15
20
30
40
60
m³/min
32-200
32-250
50-125
65-125
40-160 50-160 65-160 80-160
100-160
40-200 50-20065-200 80-200
100-200125-200
150-200
40-25050-250 65-250 80-250 100-250
125-250150-250
40-31550-315
65-31580-315
100-315
125-315
150-315
80-400100-400
125-400150-400
1.5
1.5
1.5
1.5
1.5
1.51.5
2.2
2.2
2.2
2.22.2
2.2
2.2
2.2
3
3
3
3
3
3
4
4 4
4
4
4
5.5
5.5
5.5
5.5
5.5
5.5
7.57.5
7.5
7.5
7.5
7.5
7.5
7.5
11
1111
11
11 11
11
1515
15
1515
15
15
18.5
18.5
18.5
18.5
18.5
22
2222
22
22
22
30
30
30
30
30
30
37
3737
37
3737
4545
45
45
45
55
55
55
55
75
75
75
1.1
1.1
1.1
1.1
1.1
1.1
4
4
2
8
50
80 0.1
8 03 0402 80 200 400 600 800300100606 01
2 6 8 10 20 30 60 80 100 200403 4
m³/h
l/s
mTo
tal H
ead
Capacity
GSD 4P 50 Hz1500 RPM Synchronous
speed
m³/min
10020 40 60 80 200 400 600
4 6 8 10 20 40 60 80 100 200
0.2 0.3 0.4 0.6 0.8 1 2 3 4 6 10
8
10
15
20
30
40
60
80
100
150
4
35.5
5.5
5.5
7.5
7.5
7.5
7.5
9.2
9.2
9.29.2
11
11
11
11
11
15
15
15
15
18.518.5
18.518.5
18.5
22
2222
3030
30
30
37
37
37
37
45
45
45
55
5555
75
11
15
30
37
75
9090
110
1.51.5
2.2
2.2
4
4
3
3
3
5.5
5.5
5.5
7.5
9.2
11
11
15
15
18.5
18.5
18.5
22
22
30
30
3037
37
45
45
45
55
55
55
55
75
75 75
75
75
75
75
90
90
90
110
110
110
110
80-250
100-160
100-200
100-250
125-200
150-200
32-125
32-160
32-200
32-250
40-125
40-160
40-200
40-250
40-315
65-125
50-160
65-160
50-20065-200
50-250 65-250
50-315
80-160
80-200
65-315
50-125
m³/h
l/sCapacity
mTo
tal H
ead
GSD 2P 50 Hz3000 RPM Synchronous
speed
Model code: 80-250Discharge size - mm Nominal impeller diameter - mm
Supplied as standard with spacers and/or
supports where required.
Available mounted on a galvanised steel baseplate.
Configuration with motor spacers, pump spacers, and/or stays varies depending
on pump/motor combination.
The GSD is a versatile high quality compact close coupled motor pump, and with 237 pump end/motor combinations available there are models suitable for many applications and duties wherever water needs to be transferred or boosted.
Standard OptionPump Type Close coupled end suction motor pump
to EN733 (Pump end dimensions)#
Flanges DIN/EN PN 16 (EN 1092-1)
Scope Pump discharge 32 mm to 150 mmMotor power 2 Pole: 1.5 to 110 kW
4 Pole: 1.1 to 75 kW
Performance 2 pole: (Q) 8 - 800 m³/hr (H) 10 - 150 m hd4 pole: (Q) 4 - 650 m³/hr (H) 3 - 70 m hd
Type Water
Temperature -10° to +120°C
Max. allowable working pressure (MAWP) 16 Bar*
Max. allowable suction pressure (MASP)** <16 Bar-Pump shut-off pressure (PSP)
Construction Impeller Closed centrifugal
Shaft Stub shaft & hub
Mechanical seal Single spring, rubber bellows (to EN12756)
Materials Casing Cast iron (FC250)
Impeller
Casing wear ring
Bronze (CAC 406)
Bronze (CAC 406)
Shaft 420 Stainless steel (wetted part)
Mechanical Seal SiC/Carbon/EPDM
Back cover Cast iron (FC250)
Motor bracket Cast iron (FC250)
Spacers Refer page 11
Motor Type WEG W21
Efficiency Std IE3 (or E2)
Enclosure IP55
Insulation class Class F
Motor frame material Aluminium Cast Iron Supply Motor pump c/w spacers where required. On galvanised steel baseplate
** MASP < MAWP - PSP
Liquid handled
* 16 Bar rating to ISO5199
(up to 200 Fr.) (225 Fr. & above)
# Except model 150-315
Cast Iron End Suction Motor Pumps (to EN733) GSD
* All specifications are subject to change without prior notice.* Dimensional details are provided for reference only.
EBARA Pumps Malaysia Sdn Bhd6, Jalan TP3, UEP Subang Jaya Industrial Park,47620 Subang Jaya, Selangor, Malaysia.Tel : 03-8023 6622 Fax : 03-8023 9355Email : [email protected] Website : www.ebara.com.my
EPM GD 0719
Authorised dealer:
PUMP
FEATURES
APPLICATIONS
Cast Iron End Suction Motor Pumps(to EN733) Type GSD
• Water supply & pressure bossting• Building services & cooling towers• Industrial• Irrigation, etc.
RANGE
• 37 pump end sizes• Nominal impeller sizes from 125 to 400mm• 1.5 to 110 kW 2 pole motors• 1.1 to 75 kW 4 pole motors• Discharge sizes from 32mm to 150mm• Flows to 800m3/h; Heads to 150m
A versatile high quality compact close coupled motor pump suitable or many applications where water needs to be transferred or boosted.
• Pump dimensions to EN733• High efficiency hydraulic design (MEI > 0.6 all models)• Cast Iron/Bronze/Stanless steel construction• Compact close coupled design.• SiC/C/EPDM Burgmann seal• Front & rear bronze wear rings• 16 bar casings [to ISO5199] (24 bar hydrostatic test pressure)
• Precision 2 piece stub shaft & hub design• Quality high efficiency WEG motors
CONFIGURATIONS
Pumpsets with motors over 90 frame* are fitted with spacers for ease of installation and maintenance. There are various types and combinations of spacers depending on the model. The motors are bolted to the motor spacers, so that the complete rotating element with motor and spacers is a single rigid assembly that can be “slid” back for ease of maintenance and reassembly.
3A161
Motor spacers
3B
(Solid bar/paint)
3C
4A
162
Front view(Cast iron/paint)
5A162
Front view
Pump spacers(Cast iron/paint)
Motor spacers&
161
5B
Front view
(Solid bar/paint)
1A095
Stay
2A
No spacers
6A
Motor spacer(Folded base)
161
6B
(Folded base/Zn)
GSD4 40-315/4.0 kW* plus
GSD4 100-160/2.2 kWGSD4 100-160/3.0 kWGSD4 100-200/3.0 kW
Applies to 90 frame motors*
095Item
162
161
StayDescription
Folded steelMaterial
PaintFinish
1Qty.
1AApplies to
4A,5A,5B
3B,5B3A,5A
3C6A6B
2,4,6
22211
Pump spacer Cast iron Paint
Motor spacer Folded steel
Steel bar Paint
Paint
Channel (down)Channel (side)BaseplateBaseplate
Rectangular-
-
Style
Zn plated
Zn plated
Zn plated
Specifications: Stays, Motor spacers, Pump spacers
161
162161
161
161
Pump spacers
(Folded Channel/Zn)
(Folded Channel/Zn)
(Folded Channel/Zn)
(Folded base/paint)
GSD4 40-315/4.0 kW* following models use a stay instead of motor spacers
GSD4 100-160/2.2 kWGSD4 100-160/3.0 kWGSD4 100-200/3.0 kW
All models with 90 frame motors (and the 4 models above) have a single stay as
shown on the drawing.Stay