TIOMOS HINGE SYSTEM
The hinge for the door to the future:Maximum stability. Integrated damper.Stylish design.
www.grass.at
TIOMOS HINGE SYSTEM
With Tiomos a visionhas become reality.
Hinges were already used in ancient times.With Tiomos, GRASS is now opening a new chapter that will inspire the furniture makers of the future. The development of Tiomos has benefited from several decades of know-how and experience. Years of research have been dedicated to reconceptualising and developing every detail and function from the bottom up. The result is a very elegant movement system which already meets all technical and functional requirements of the future.
1
Soft-close inside.The whole damper technology isconcealed inside the hinge arm.
Three levels for individual comfort.In addition to its many special functions, timeless design and unique character,Tiomos offers stepwise adjustment of the damping level.The action of the Soft-close damper can be easily adjusted to individualrequirements – a turn of the lever is all that is needed.
For stronger damping action, turn the adjustment leverby 90° to the right.
Tiomos hinges leave the factory with the adjustment lever in thehorizontal position.
For a gentler closing action, theadjustment lever of the Soft-Close damperis turned to the left by 90°.
2
TIOMOS HINGE SYSTEM
In most cases a masterpiece is the sum total of small strokes of genius. Tiomos is the best example to prove the point.
One of the outstanding characteristics of the new hinge system is the Soft-Close damper which can be adjusted in stages and which is fully concealed within the hinge arm. The complex inner workings of this high-tech hinge are hidden from view, much like a Swiss clock movement, and cannot fail to impress with their unique damping characteristics. The closing process in each movement phase is smooth and completely without transition, irrespective of the size and weight of the door.
One range to cover all applications.
Consistent design solutions are only possible when all kinds of door applica-tions can be covered by a single hinge system. The systematically extended Tiomos range provides perfect move-ment solutions for nearly all applica-tions, from glass, mirror or aluminium frame doors through to doors opening at variable wide angles. With and with-out damping function.
You can tell the quality of a hinge system by how long a hinge will function without developing a fault and how much it will drop under load. Tiomos has achieved exception-ally positive values in tests for durability and for dropping under load.
Perfect alignmentwith a twist of the hand.
For fine adjustment, the Tiomos hinge system offers three movement dimensions:depth adjustment by +3 to -2 millimetres; it is based on a worm gear principle and is continuous and self-locking; the height can be adjusted by +/- 2.5 millimetres; the overlay adjustment is +/- 2 millimetres with limit stop.
Another stroke of genius is the new kinematics inside Tiomos.
Thanks to physically optimised lever movements, furniture doors are extremely easy to open.In addition, this unique kinematic mechanism makes unprecedented alignment possible with minimum gaps.These unique characteristics of the new hinge system are of special benefit to furniture designers because the reduction in gaps and reveals opens up new possibilities in furniture design.
3
4
TiomosProduct Overview.
Opening angle Drill hole Short description Full overlay Overlay Half overlay Inset Page
110°
35 mm
TIOMOS 110
•Optimum reveals for door thicknesses up to 24 mm
•Convenient depth adjustment via worm gear
6
120°
35 mm
TIOMOS 120
•Optimum reveals for door thicknesses up to 22 mm
•Convenient depth adjustment via worm gear
10
160°
35 mm
TIOMOS 160
•For cupboards with inset drawers and shelves•Doorthicknessesupto32mm•Shallowcupdepth
14
95°
35 mm
TIOMOS 95
•Optimum reveals for door thicknesses up to 30 mm
•Convenient depth adjustment via worm gear
18
110°
35 mm
TIOMOS 110 AL
•Optimum reveals for aluminium frames up to max. 24 mm frame thickness and 22 mm frame width
•Hingenotvisiblefromtheoutside
22
110°
35 mm
TIOMOS 110/90E
•Hinge for blind corner application•Convenient depth adjustment
via worm gear
24
110°
35 mm
TIOMOS 110/30A
•For 30° angled cabinets•Convenient depth adjustment
via worm gear
28
110°
35 mm
TIOMOS 110/30E
•For 30° angled cabinets•Convenient depth adjustment
via worm gear
32
110°
35 mm
TIOMOS 110/37A
•For 37° angled cabinets•Convenient depth adjustment
via worm gear
36
110°
35 mm
TIOMOS 110/37E
•For 37° angled cabinets•Convenient depth adjustment
via worm gear
40
5
Opening angle Drill hole Short description Full overlay Overlay Half overlay Inset Page
110°
35 mm
TIOMOS 110/45A
•For 45° angled cabinets•Convenient depth adjustment
via worm gear
44
110°
35 mm
TIOMOS 110/45E
•For 45° angled cabinets•Convenient depth adjustment
via worm gear
48
120°
35 mm
TIOMOS 120/-15A
•For -15° angled cabinets•Convenient depth adjustment
via worm gear
120°
35 mm
TIOMOS 120/-30A
•For -30° angled cabinets•Convenient depth adjustment
via worm gear
56
120°
35 mm
TIOMOS 120/-45A
•For -45° angled cabinets•Convenient depth adjustment
via worm gear
60
Accessories
•Hinge arm•Openinganglereductionclip•Fixingscrews
64
Mounting plates for Tiomos hinges
66
Technical information
72
TIPMATIC
•For handle-free wooden doors and aluminium frame doors
•Forhandle-freeglassandmirrordoors•Assemblyaids
78
52
6
•Opening angle 110°•Optimum reveals for door thicknesses
up to 24 mm•Convenient depth adjustment
via worm gear•3-dimensional adjustment with
appropriate mounting plate
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)• Without integrated damper•Without self-closing mechanism
(without spring)
110°
ORDER INFORMATION FOR DRILLING PATTERN 45/9.5
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay 1 0
■ - - 50 F028138519217 F028138523217 F017139329217
- ■ - 50 F045138457217 F045138461217 F034139300217
- ■ ■ 50 F046138579217 – F035139357217
Overlay 1 3
■ - - 50 F028138520217 F028138524217 F017139330217
- ■ - 50 F045138458217 F045138462217 F034139301217
- ■ ■ 50 F046138580217 – F035139358217
Half overlay 2 9.5
■ - - 50 F028138521217 F028138525217 F017139331217
- ■ - 50 F045138459217 F045138463217 F034139302217
- ■ ■ 50 F046138581217 – F035139359217
Inset 2 19
■ - - 50 F028138522217 F028138526217 F017139332217
- ■ - 50 F045138460217 F045138464217 F034139303217
- ■ ■ 50 F046138582217 – F0351393602171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
COVER CAPS
Designation Cranking Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
0/3/9.5/19 On request 100/1000 F072135500547
Hinge arm cover capSteel, long, nickel-plated, not imprinted
0, 3 On request 100/1000 F072135504547
Hinge cup cover capSteel, nickel-plated, not imprinted
0/3/9.5/19 On request 50/500 F072135503540
Tiomos mounting plates 66
Technical information 72
TIPMATIC 78
Assembly aids 83
Accessories 64
ACCESSORIES
Designation PU Item No.
Opening angle reduction clip 85°
50/500 F072135751540
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Designation PU Item No.
Countersunk wood screw Ø 3.5 x 15 mm
5000 F146073976256
TIOMOS 110 110° hinge (door thicknesses up to 24 mm)
7
INSTALLATION INFORMATION All dimensions in millimetres
Full overlay K0 Overlay K3 Half overlay K9.5 Inset1 K19
84.5
3-7
F12
24
13
84.5
3-7
24
F15 10
3-7
84.5
31
2 x F21.5
F3.5 31
86
40.5
F
3-7
Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 21 Set mounting plate back by door
thickness +1.5 mm
Doo
r ov
erla
y
0Cup distance
3 4 5 6 722.0 021.0 020.0 0 219.0 0 2 318.5 3.518.0 0 2 317.5 3.517.0 2 316.5 3.516.0 2 315.5 3.515.0 314.5 3.5
Mounting plate height
Doo
r ov
erla
y
3Cup distance
3 4 5 6 719.0 018.0 017.0 0 216.516.0 0 2 315.5 3.515.0 0 2 314.5 3.514.0 2 313.5 3.513.0 2 312.5 3.512.0 311.5 3.5
Mounting plate height
Doo
r ov
erla
y9.5
Cup distance3 4 5 6 7
12.5 011.5 010.5 0 210.09.5 0 2 39.0 3.58.5 0 2 38.0 3.57.5 2 37.0 3.56.5 2 36.0 3.55.5 35.0 3.5
Mounting plate height
Doo
r re
veal
19Cup distance
3 4 5 6 70.0 0 2 30.5 3.51.0 0 2 31.5 3.52.0 2 33.0 2 34.0 3
Mounting plate height
MINIMUM GAP
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 1.0 1.0 1.0 1.22 1.22
22.0 1.0 1.0 1.0 1.0 1.52
21.0 1.0 1.0 1.0 1.0 1.22
20.0 1.0 1.0 1.0 1.0 1.019.0 1.0 1.0 1.0 1.0 1.018.0 1.0 1.0 1.0 1.0 1.017.0 1.0 1.0 1.0 1.0 1.016.0 1.0 1.0 1.0 1.0 1.0
Minimum gap2 At 85° opening angle the value is 1.0
MINIMUM REVEAL
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 2.4 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
OPENING ANGLE 85°
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
36.0 11.1 10.3 9.7 9.1 8.530.0 5.4 4.8 4.4 4.3 4.228.0 3.7 3.6 3.5 3.4 3.326.0 2.9 2.8 2.8 2.7 2.624.0 2.2 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.716.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F) 3 at 85°3 Values w. opening angle red. clip 85°
NOTES
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
For door thicknesses of 24 mm and above, a trial fitting is recommended.
DRILLING PATTERNS 45/9.5
Screw fixing Press fitting
9.5
45
35+0.1
45
8 9.5
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
TIOMOS 110 110° HINGE
8
ORDER INFORMATION FOR DRILLING PATTERN 48/9
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 50 F028138093217 F028138097217 F017139329217
- ■ - 50 F045138000217 F045138004217 F034139300217
- ■ ■ 50 F046138184217 – F035139357217
Overlay 1 3
■ - - 50 F028138094217 F028138098217 F017139330217
- ■ - 50 F045138001217 F045138005217 F034139301217
- ■ ■ 50 F046138185217 – F035139358217
Half overlay 2 9.5
■ - - 50 F028138095217 F028138099217 F017139331217
- ■ - 50 F045138002217 F045138006217 F034139302217
- ■ ■ 50 F046138186217 – F035139359217
Inset 2 19
■ - - 50 F028138096217 F028138100217 F017139332217
- ■ - 50 F045138003217 F045138007217 F034139303217
- ■ ■ 50 F046138187217 – F0351393602171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/9
Screw fixing Press fitting
9
48
35+0.1
48
8 9
35+0.1
Combination drilling pattern for Impresso
48
8 9
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 42/11
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 50 F028138337217 F028138341217 F017139414217
- ■ - 50 F045138275217 F045138279217 F034139385217
- ■ ■ 50 F046138397217 – F035139442217
Overlay 1 3
■ - - 50 F028138338217 F028138342217 F017139415217
- ■ - 50 F045138276217 F045138280217 F034139386217
- ■ ■ 50 F046138398217 – F035139443217
Half overlay 2 9.5
■ - - 50 F028138339217 F028138343217 F017139416217
- ■ - 50 F045138277217 F045138281217 F034139387217
- ■ ■ 50 F046138399217 – F035139444217
Inset 2 19
■ - - 50 F028138340217 F028138344217 F017139417217
- ■ - 50 F045138278217 F045138282217 F034139388217
- ■ ■ 50 F046138400217 – F0351394452171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 42/11
Screw fixing Press fitting
11
42
35+0.1
42
8 11
35+0.1
Combination drilling pattern for Impresso
42
8 11
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110 110° hinge (door thicknesses up to 24 mm)
9
ORDER INFORMATION FOR DRILLING PATTERN 52/5.5
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 50 F028138701217 F028138705217 F017139499217
- ■ - 50 F045138639217 F045138643217 F034139470217
- ■ ■ 50 F046138761217 – F035139527217
Overlay 1 3
■ - - 50 F028138702217 F028138706217 F017139500217
- ■ - 50 F045138640217 F045138644217 F034139471217
- ■ ■ 50 F046138762217 – F035139528217
Half overlay 2 9.5
■ - - 50 F028138703217 F028138707217 F017139501217
- ■ - 50 F045138641217 F045138645217 F034139472217
- ■ ■ 50 F046138763217 – F035139529217
Inset 2 19
■ - - 50 F028138704217 F028138708217 F017139502217
- ■ - 50 F045138642217 F045138646217 F034139473217
- ■ ■ 50 F046138764217 – F0351395302171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 52/5.5
Screw fixing Press fitting
52
5.5
35+0.1
10
52
5.5
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 635+0.1
CUP DIMENSIONS
40 (4
0.5)
67 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
40 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 48/6
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 50 F028138883217 F028138887217 F017139499217
- ■ - 50 F045138821217 F045138825217 F034139470217
- ■ ■ 50 F046138943217 – F035139527217
Overlay 1 3
■ - - 50 F028138884217 F028138888217 F017139500217
- ■ - 50 F045138822217 F045138826217 F034139471217
- ■ ■ 50 F046138944217 – F035139528217
Half overlay 2 9.5
■ - - 50 F028138885217 F028138889217 F017139501217
- ■ - 50 F045138823217 F045138827217 F034139472217
- ■ ■ 50 F046138945217 – F035139529217
Inset 2 19
■ - - 50 F028138886217 F028138890217 F017139502217
- ■ - 50 F045138824217 F045138828217 F034139473217
- ■ ■ 50 F046138946217 – F0351395302171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/6
Screw fixing Press fitting
6
35+0.1
48 48
10 6
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110 110° HINGE
10
•Opening angle 120°•Optimum reveals for door thicknesses
up to 22 mm•Convenient depth adjustment
via worm gear• 3-dimensional adjustment with
appropriate mounting plate
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)•Without integrated damper• Without self-closing mechanism
(without spring)
120°
ORDER INFORMATION FOR DRILLING PATTERN 45/9.5
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay 1 0
■ - - 50 F028138547217 F028138551217 F017139343217
- ■ - 50 F045138485217 F045138489217 F034139314217
- ■ ■ 50 F046138607217 – F035139371217
Overlay 1 3
■ - - 50 F028138548217 F028138552217 F017139344217
- ■ - 50 F045138486217 F045138490217 F034139315217
- ■ ■ 50 F046138608217 – F035139372217
Half overlay 2 9.5
■ - - 50 F028138549217 F028138553217 F017139345217
- ■ - 50 F045138487217 F045138491217 F034139316217
- ■ ■ 50 F046138609217 – F035139373217
Inset 2 19
■ - - 50 F028138550217 F028138554217 F017139346217
- ■ - 50 F045138488217 F045138492217 F034139317217
- ■ ■ 50 F046138610217 – F0351393742171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
ACCESSORIES
Designation PU Item No.
Opening angle reduction clip 85°
50/500 F072135751540
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Designation PU Item No.
Countersunk wood screw Ø 3.5 x 15 mm
5000 F146073976256
TIOMOS 120 120° hinge (door thicknesses up to 24 mm)
COVER CAPS
Designation Cranking Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
0/3/9.5/19 On request 100/1000 F072135500547
Hinge arm cover capSteel, long, nickel-plated, not imprinted
0, 3 On request 100/1000 F072135504547
Hinge cup cover capSteel, nickel-plated, not imprinted
0/3/9.5/19 On request 50/500 F072135503540
11
INSTALLATION INFORMATION All dimensions in millimetres
Full overlay K0 Overlay K3 Half overlay K9.5 Inset1 K19
84.5
3-7
F
24
12.5 13
84.5
3-7
24
F15.5 10 3.522
84.5
31
2 x F F
3-7
86
40.5
F
3-7
31.5
Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 21 Set mounting plate back by door
thickness +1.5 mm
Doo
r ov
erla
y
0Cup distance
3 4 5 6 722.0 021.0 020.0 0 219.0 0 2 318.5 3.518.0 0 2 317.5 3.517.0 2 316.5 3.516.0 2 315.5 3.515.0 314.5 3.5
Mounting plate height
Doo
r ov
erla
y
3Cup distance
3 4 5 6 719.0 018.0 017.0 0 216.516.0 0 2 315.5 3.515.0 0 2 314.5 3.514.0 2 313.5 3.513.0 2 312.5 3.512.0 311.5 3.5
Mounting plate height
Doo
r ov
erla
y9.5
Cup distance3 4 5 6 7
12.5 011.5 010.5 0 210.09.5 0 2 39.0 3.58.5 0 2 38.0 3.57.5 2 37.0 3.56.5 2 36.0 3.55.5 35.0 3.5
Mounting plate height
Doo
r re
veal
19Cup distance
3 4 5 6 70.0 0 2 30.5 3.51.0 0 2 31.5 3.52.0 2 33.0 2 34.0 3
Mounting plate height
MINIMUM GAP
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 1.2 2.1 3.0 3.9 4.722.0 1.0 1.1 2.0 2.9 3.821.0 1.0 1.0 1.6 2.4 3.320.0 1.0 1.0 1.1 2.0 2.919.0 1.0 1.0 1.0 1.5 2.418.0 1.0 1.0 1.0 1.0 1.917.0 1.0 1.0 1.0 1.0 1.516.0 1.0 1.0 1.0 1.0 1.0
Minimum gap
MINIMUM REVEAL
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 6.4 5.4 4.4 3.4 2.422.0 3.0 2.0 1.5 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 1.0 1.0 1.0 1.0 1.516.0 1.0 1.0 1.0 1.0 1.0
Minimum reveal (F)
OPENING ANGLE 85°
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
36.0 11.1 10.3 9.7 9.1 8.530.0 5.4 4.8 4.4 4.3 4.228.0 3.7 3.6 3.5 3.4 3.326.0 2.9 2.8 2.8 2.7 2.624.0 2.2 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.716.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F) 2 at 85°2 Values w. opening angle red. clip 85°
NOTES
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
For door thicknesses of 24 mm and above, a trial fitting is recommended.
DRILLING PATTERNS 45/9.5
Screw fixing Press fitting
9.5
45
35+0.1
45
8 9.5
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
TIOMOS 120 120° HINGE
12
ORDER INFORMATION FOR DRILLING PATTERN 48/9
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 50 F028138121217 F028138125217 F017139343217
- ■ - 50 F045138028217 F045138032217 F034139314217
- ■ ■ 50 F046138212217 – F035139371217
Overlay 1 3
■ - - 50 F028138122217 F028138126217 F017139344217
- ■ - 50 F045138029217 F045138033217 F034139315217
- ■ ■ 50 F046138213217 – F035139372217
Half overlay 2 9.5
■ - - 50 F028138123217 F028138127217 F017139345217
- ■ - 50 F045138030217 F045138034217 F034139316217
- ■ ■ 50 F046138214217 F035139373217
Inset 2 19
■ - - 50 F028139017217 F028139018217 F017139346217
- ■ - 50 F045139019217 F045139020217 F034139317217
- ■ ■ 50 F046139021217 – F0351393742171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/9
Screw fixing Press fitting
9
48
35+0.1
48
8 9
35+0.1
Combination drilling pattern for Impresso
48
8 9
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 42/11
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 50 F028138365217 F028138369217 F017139428217
- ■ - 50 F045138303217 F045138307217 F034139399217
- ■ ■ 50 F046138425217 – F035139456217
Overlay 1 3
■ - - 50 F028138366217 F028138370217 F017139429217
- ■ - 50 F045138304217 F045138308217 F034139400217
- ■ ■ 50 F046138426217 – F035139457217
Half overlay 2 9.5
■ - - 50 F028138367217 F028138371217 F017139430217
- ■ - 50 F045138305217 F045138309217 F034139401217
- ■ ■ 50 F046138427217 – F035139458217
Inset 2 19
■ - - 50 F028139027217 F028139028217 F017139558217
- ■ - 50 F045139029217 F045139030217 F034139559217
- ■ ■ 50 F046139031217 – F0351395602171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 42/11
Screw fixing Press fitting
11
42
35+0.1
42
8 11
35+0.1
Combination drilling pattern for Impresso
42
8 11
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 120 120° hinge (door thickness up to 24 mm)
13
ORDER INFORMATION FOR DRILLING PATTERN 52/5.5
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 50 F028138729217 F028138733217 F017139513217
- ■ - 50 F045138667217 F045138671217 F034139484217
- ■ ■ 50 F046138789217 – F035139541217
Overlay 1 3
■ - - 50 F028138730217 F028138734217 F017139514217
- ■ - 50 F045138668217 F045138672217 F034139485217
- ■ ■ 50 F046138790217 – F035139542217
Half overlay 2 9.5
■ - - 50 F028138731217 F028138735217 F017139515217
- ■ - 50 F045138669217 F045138673217 F034139486217
- ■ ■ 50 F046138791217 – F035139543217
Inset 2 19
■ - - 50 F028139022217 F028139023217 F017139555217
- ■ - 50 F045139024217 F045139025217 F034139556217
- ■ ■ 50 F046139026217 – F0351395572171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 52/5.5
Screw fixing Press fitting
52
5.5
35+0.1
10
52
5.5
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 635+0.1
CUP DIMENSIONS
40 (4
0.5)
67 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
40 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 48/6
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 50 F028138911217 F028138915217 F017139513217
- ■ - 50 F045138849217 F045138853217 F034139484217
- ■ ■ 50 F046138971217 – F035139541217
Overlay 1 3
■ - - 50 F028138912217 F028138916217 F017139514217
- ■ - 50 F045138850217 F045138854217 F034139485217
- ■ ■ 50 F046138972217 – F035139542217
Half overlay 2 9.5
■ - - 50 F028138913217 F028138917217 F017139515217
- ■ - 50 F045138851217 F045138855217 F034139486217
- ■ ■ 50 F046138973217 – F035139543217
Inset 2 19
■ - - 50 F028139032217 F028139033217 F017139555217
- ■ - 50 F045139034217 F045139035217 F034139556217
- ■ ■ 50 F046139036217 – F0351395572171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/6
Screw fixing Press fitting
6
35+0.1
48 48
10 6
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 120 120° HINGE
14
•Opening angle 160°•Convenient depth adjustment
via worm gear•For cabinets with inset drawers
or pull-out shelves•Up to 32 mm door thickness•3-dimensional adjustment with
appropriate mounting plate•Minimum reveals•Shallow cup depth
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)•Without integrated damper•Without self-closing mechanism (without
spring)
160°
ORDER INFORMATION FOR DRILLING PATTERN 45/9.5
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay 1 0
■ - - 25 F028138561213 F028138564213 F017139350213
- ■ - 25 F045138499213 F045138502213 F034139321213
- ■ ■ 25 F046138621213 – F035139378213
Overlay 1 3
■ - - 25 F028138562213 F028138565213 F017139351213
- ■ - 25 F045138500213 F045138503213 F034139322213
- ■ ■ 25 F046138622213 – F035139379213
Half overlay 1 9.5
■ - - 25 F028138563213 F028138566213 F017139352213
- ■ - 25 F045138501213 F045138504213 F034139323213
- ■ ■ 25 F046138623213 – F0351393802131 Cup material: Zamak, nickel-plated / Arm material: Zamak, nickel-plated
ACCESSORIES
Designation PU Item No.
Opening anglereduction clip 120°
50/500 F072135753540
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Designation PU Item No.
Countersunk wood screw Ø 3.5 x 15 mm
5000 F146073976256
MITRED APPLICATION (ON ALL SIDES)
86
8119
3756
1.5
4
23 1
19
1919
13.6
120°
With 0 cranking, mounting plate height 19 mm and cup distance 4 mm, door and cabinet edges can meet at mitred angles on all 4 sides.
Use 120° opening angle reduction clip.
NO INWARD OFFSET
NulleinsprungBei Kröpfung 03 und Montageplatte, Höhe 02,
steht bei 90° die Tür korpusbündig!
For cabinets with inset drawers.
At 0 cranking, and with all mounting plate thicknesses, the door protrudes inwards at 90°. With cranking size 3 and mounting plate height 3 mm, the door will be flush with the cabinet.
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 160 160° wide-angle hinge (door thicknesses up to 32 mm)
15
INSTALLATION INFORMATION All dimensions in millimetres
Full overlay K0 Overlay K3 Half overlay K9.5 Inset 1
3-10
84.5
64
F3.4
13
84.5
3-10
F
10
67
0.4
84.5
3-10
2x F6.1
73.5
3.5F
86
83
3-10
F6
15.6
Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Cranking 0, Mounting plate height 21
1 Set mounting plate back by door thickness +1.5 mm
Doo
r ov
erla
y
0Cup distance3 4 5 6 7 8 9 10
25.0 024.0 023.0 0 222.0 0 2 321.0 0 2 320.0 0 2 319.0 0 2 318.5 3.518.0 0 2 317.5 3.517.0 2 316.5 3.516.0 2 315.5 3.515.0 314.5 3.5
Mounting plate height
Doo
r ov
erla
y
3Cup distance3 4 5 6 7 8 9 10
22.0 021.0 020.0 0 219.0 0 2 318.0 0 2 317.0 0 2 316.5 3.516.0 0 2 315.5 3.515.0 0 2 314.5 3.514.0 2 313.5 3.513.0 2 312.5 3.512.0 311.5 3.5
Mounting plate height
Doo
r ov
erla
y9.5
Cup distance3 4 5 6 7 8 9 10
15.5 014.5 013.5 0 212.5 0 2 311.5 0 2 310.5 0 2 310.0 3.59.5 0 2 39.0 3.58.5 0 2 38.0 3.57.5 2 37.0 3.56.5 2 36.0 3.55.5 35.0 3.5
Mounting plate height
Doo
r re
veal
19Cup distance3 4 5 6 7
0.0 19 210.51.0 19 211.52.0 213.0 214.0
Mounting plate height
MINIMUM GAP
Doo
r th
ickn
ess
Cup distance3 4 5 6 7 8 9 10
32.0 1.0 1.031.0 1.0 1.0 1.030.0 1.0 1.0 1.029.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.028.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.026.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.025.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.024.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.022.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.021.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.020.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.018.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.016.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
Minimum gap
MINIMUM REVEAL
Doo
r th
ickn
ess
Cup distance3 4 5 6 7 8 9 10
32.0 0.2 0.231.0 0.2 0.2 0.2 0.230.0 0.2 0.2 0.2 0.2 0.229.0 0.2 0.2 0.2 0.2 0.2 0.2 0.228.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.026.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.025.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.024.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.022.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.021.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.020.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.018.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.016.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Minimum reveal (F) ■ only possible with 120° angle red. clip
NOTES
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
No reveal is required for door thicknesses up to 28 mm. From 29 mm door thickness, we recommend a trial fitting.
DRILLING PATTERNS 45/9.5
Screw fixing Press fitting
9.5
45
35+0.1
45
8 9.5
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 10
3 (8
)
39 (40.5)
TIOMOS 160 160° WIDE-ANGLE HINGE
16
ORDER INFORMATION FOR DRILLING PATTERN 48/9
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 25 F028138135213 F028138138213 F017139350213
- ■ - 25 F045138042213 F045138045213 F034139321213
- ■ ■ 25 F046138226213 – F035139378213
Overlay 1 3
■ - - 25 F028138136213 F028138139213 F017139351213
- ■ - 25 F045138043213 F045138046213 F034139322213
- ■ ■ 25 F046138227213 – F035139379213
Half overlay 1 9.5
■ - - 25 F028138137213 F028138140213 F017139352213
- ■ - 25 F045138044213 F045138047213 F034139323213
- ■ ■ 25 F046138228213 – F035139380213
1 Cup material: Zamak, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/9
Screw fixing Press fitting
9
48
35+0.1
48
8 9
35+0.1
Combination drilling pattern for Impresso
48
8 9
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 10
3 (8
)
39 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 42/11
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 25 F028138379213 F028138382213 F017139435213
- ■ - 25 F045138317213 F045138320213 F034139406213
- ■ ■ 25 F046138439213 – F035139463213
Overlay 1 3
■ - - 25 F028138380213 F028138383213 F017139436213
- ■ - 25 F045138318213 F045138321213 F034139407213
- ■ ■ 25 F046138440213 – F035139464213
Half overlay 1 9.5
■ - - 25 F028138381213 F028138384213 F017139437213
- ■ - 25 F045138319213 F045138322213 F034139408213
- ■ ■ 25 F046138441213 – F035139465213
1 Cup material: Zamak, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 42/11
Screw fixing Press fitting
11
42
35+0.1
42
8 11
35+0.1
Combination drilling pattern for Impresso
42
8 11
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 10
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 160 160° wide-angle hinge (door thickness up to 32 mm)
17
ORDER INFORMATION FOR DRILLING PATTERN 52/5.5
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 25 F028138743213 F028138746213 F017139520213
- ■ - 25 F045138681213 F045138684213 F034139491213
- ■ ■ 25 F046138803213 – F035139548213
Overlay 1 3
■ - - 25 F028138744213 F028138747213 F017139521213
- ■ - 25 F045138682213 F045138685213 F034139492213
- ■ ■ 25 F046138804213 – F035139549213
Half overlay 1 9.5
■ - - 25 F028138745213 F028138748213 F017139522213
- ■ - 25 F045138683213 F045138686213 F034139493213
- ■ ■ 25 F046138805213 – F035139550213
1 Cup material: Zamak, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 52/5.5
Screw fixing Press fitting
52
5.5
35+0.1
10
52
5.5
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 635+0.1
CUP DIMENSIONS
40 (4
0.5)
67 (64.5) ( ) Impresso
min
. 10
3 (8
)
40 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 48/6
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 25 F028138925213 F028138928213 F017139520213
- ■ - 25 F045138863213 F045138866213 F034139491213
- ■ ■ 25 F046138985213 – F035139548213
Overlay 1 3
■ - - 25 F028138926213 F028138929213 F017139521213
- ■ - 25 F045138864213 F045138867213 F034139492213
- ■ ■ 25 F046138986213 – F035139549213
Half overlay 1 9.5
■ - - 25 F028138927213 F028138930213 F017139522213
- ■ - 25 F045138865213 F045138868213 F034139493213
- ■ ■ 25 F046138987213 – F035139550213
1 Cup material: Zamak, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/6
Screw fixing Press fitting
6
35+0.1
48 48
10 6
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 10
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 160 160° WIDE-ANGLE HINGE
18
•Opening angle 95°•Optimum reveals for door
thicknesses up to 30 mm•Convenient depth adjustment
via worm gear•3-dimensional adjustment
with appropriate mounting plate
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)•Without integrated damper•Without self-closing mechanism
(without spring)
95°
ORDER INFORMATION FOR DRILLING PATTERN 45/9.5 (Available on request)
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay 1 0
■ - - 50 F028138567217 F028138571217 F017139353217
- ■ - 50 F045138505217 F045138509217 F034139324217
- ■ ■ 50 F046138627217 – F035139381217
Overlay 1 3
■ - - 50 F028138568217 F028138572217 F017139354217
- ■ - 50 F045138506217 F045138510217 F034139325217
- ■ ■ 50 F046138628217 – F035139382217
Half overlay 2 9.5
■ - - 50 F028138569217 F028138573217 F017139355217
- ■ - 50 F045138507217 F045138511217 F034139326217
- ■ ■ 50 F046138629217 – F035139383217
Inset 2 19
■ - - 50 F028138570217 F028138574217 F017139356217
- ■ - 50 F045138508217 F045138512217 F034139327217
- ■ ■ 50 F046138630217 – F0351393842171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
ACCESSORIES
Designation PU Item No..
Opening angle reduction clip 85°
50/500 F072135751540
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Designation PU Item No..
Countersunk wood screw Ø 3.5 x 15 mm
5000 F146073976256
TIOMOS 95 95° hinge (door thicknesses up to 36 mm)
COVER CAPS
Designation Cranking Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
0/3/9.5/19 On request 100/1000 F072135500547
Hinge arm cover capSteel, long, nickel-plated, not imprinted
0, 3 On request 100/1000 F072135504547
Hinge cup cover capSteel, nickel-plated, not imprinted
0/3/9.5/19 On request 50/500 F072135503540
19
DRILLING PATTERNS 45/9.5
Screw fixing Press fitting
9.5
45
35+0.1
45
8 9.5
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
INSTALLATION INFORMATION All dimensions in millimetres
Full overlay K0 Overlay K3 Half overlay K9.5 Inset1 K19
3-7
F
1313
24
84.5
F
3-7
1016
24
84.5
3-7
F3.5
2xF 22.5
31
84.5
F
3-7
632
86
40.5
Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 21 Set mounting plate back by door
thickness +1.5 mm
Doo
r ov
erla
y
0Cup distance
3 4 5 6 722.0 021.0 020.0 0 219.0 0 2 318.5 3.518.0 0 2 317.5 3.517.0 2 316.5 3.516.0 2 315.5 3.515.0 314.5 3.5
Mounting plate height
Doo
r ov
erla
y
3Cup distance
3 4 5 6 719.0 018.0 017.0 0 216.516.0 0 2 315.5 3.515.0 0 2 314.5 3.514.0 2 313.5 3.513.0 2 312.5 3.512.0 311.5 3.5
Mounting plate height
Doo
r ov
erla
y9.5
Cup distance3 4 5 6 7
12.5 011.5 010.5 0 210.09.5 0 2 39.0 3.58.5 0 2 38.0 3.57.5 2 37.0 3.56.5 2 36.0 3.55.5 35.0 3.5
Mounting plate height
Doo
r re
veal
19Cup distance
3 4 5 6 70.0 0 2 30.5 3.51.0 0 2 31.5 3.52.0 2 33.0 2 34.0 3
Mounting plate height
MINIMUM GAP
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
36.0 1.0 1.0 1.0 1.0 2.430.0 1.0 1.0 1.0 1.0 1.828.0 1.0 1.0 1.0 1.0 1.726.0 1.0 1.0 1.0 1.2 1.524.0 1.0 1.0 1.0 1.0 1.522.0 1.0 1.0 1.0 1.0 1.520.0 1.0 1.0 1.0 1.0 1.018.0 1.0 1.0 1.0 1.0 1.016.0 1.0 1.0 1.0 1.0 1.0
Minimum gap
MINIMUM REVEAL
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
36.0 10.5 10.0 8.6 7.6 6.730.0 4.0 3.0 2.5 1.9 2.428.0 2.0 1.5 1.5 1.3 1.326.0 1.0 1.0 1.0 1.0 1.024.0 0.6 0.6 0.6 0.6 0.622.0 0.5 0.5 0.5 0.5 0.520.0 0.3 0.3 0.3 0.3 0.318.0 0.2 0.2 0.2 0.2 0.216.0 0.2 0.2 0.2 0.2 0.2
Minimum reveal (F)
NOTES
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
No reveal is required for door thicknesses up to 28 mm. From 29 mm door thickness, we recommend a trial fitting.
TIOMOS 95 95° HINGE
20
ORDER INFORMATION FOR DRILLING PATTERN 48/9 (Available on request)
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 50 F028138141217 F028138145217 F017139353217
- ■ - 50 F045138048217 F045138052217 F034139324217
- ■ ■ 50 F046138232217 – F035139381217
Overlay 1 3
■ - - 50 F028138142217 F028138146217 F017139354217
- ■ - 50 F045138049217 F045138053217 F034139325217
- ■ ■ 50 F046138233217 – F035139382217
Half overlay 2 9.5
■ - - 50 F028138143217 F028138147217 F017139355217
- ■ - 50 F045138050217 F045138054217 F034139326217
- ■ ■ 50 F046138234217 – F035139383217
Inset 2 19
■ - - 50 F028138144217 F028138148217 F017139356217
- ■ - 50 F045138051217 F045138055217 F034139327217
- ■ ■ 50 F046138235217 – F0351393842171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/9
Screw fixing Press fitting
9
48
35+0.1
48
8 9
35+0.1
Combination drilling pattern for Impresso
48
8 9
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 42/11 (Available on request)
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 50 F028138385217 F028138389217 F017139438217
- ■ - 50 F045138323217 F045138327217 F034139409217
- ■ ■ 50 F046138445217 – F035139466217
Overlay 1 3
■ - - 50 F028138386217 F028138390217 F017139439217
- ■ - 50 F045138324217 F045138328217 F034139410217
- ■ ■ 50 F046138446217 – F035139467217
Half overlay 2 9.5
■ - - 50 F028138387217 F028138391217 F017139440217
- ■ - 50 F045138325217 F045138329217 F034139411217
- ■ ■ 50 F046138447217 – F035139468217
Inset 2 19
■ - - 50 F028138388217 F028138392217 F017139441217
- ■ - 50 F045138326217 F045138330217 F034139412217
- ■ ■ 50 F046138448217 – F0351394692171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 42/11
Screw fixing Press fitting
11
42
35+0.1
42
8 11
35+0.1
Combination drilling pattern for Impresso
42
8 11
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 95 95° hinge (door thicknesses up to 36 mm)
21
ORDER INFORMATION FOR DRILLING PATTERN 52/5.5 (Available on request)
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 50 F028138749217 F028138753217 F017139523217
- ■ - 50 F045138687217 F045138691217 F034139494217
- ■ ■ 50 F046138809217 – F035139551217
Overlay 1 3
■ - - 50 F028138750217 F028138754217 F017139524217
- ■ - 50 F045138688217 F045138692217 F034139495217
- ■ ■ 50 F046138810217 – F035139552217
Half overlay 2 9.5
■ - - 50 F028138751217 F028138755217 F017139525217
- ■ - 50 F045138689217 F045138693217 F034139496217
- ■ ■ 50 F046138811217 – F035139553217
Inset 2 19
■ - - 50 F028138752217 F028138756217 F017139526217
- ■ - 50 F045138690217 F045138694217 F034139497217
- ■ ■ 50 F046138812217 – F0351395542171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 52/5.5
Screw fixing Press fitting
52
5.5
35+0.1
10
52
5.5
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 635+0.1
CUP DIMENSIONS
40 (4
0.5)
67 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
40 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 48/6 (Available on request)
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay1 0
■ - - 50 F028138931217 F028138935217 F017139523217
- ■ - 50 F045138869217 F045138873217 F034139494217
- ■ ■ 50 F046138991217 – F035139551217
Overlay 1 3
■ - - 50 F028138932217 F028138936217 F017139524217
- ■ - 50 F045138870217 F045138874217 F034139495217
- ■ ■ 50 F046138992217 – F035139552217
Half overlay 2 9.5
■ - - 50 F028138933217 F028138937217 F017139525217
- ■ - 50 F045138871217 F045138875217 F034139496217
- ■ ■ 50 F046138993217 – F035139553217
Inset 2 19
■ - - 50 F028138934217 F028138938217 F017139526217
- ■ - 50 F045138872217 F045138876217 F034139497217
- ■ ■ 50 F046138994217 – F0351395542171 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/6
Screw fixing Press fitting
6
35+0.1
48 48
10 6
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 95 95° HINGE
22
•Opening angle 110°•Optimum reveals with aluminium frames
up to max. 24 mm frame thickness and 22 mm frame width
•Hinge not visible from the outside•Convenient depth adjustment
via worm gear•3-dimensional adjustment with
appropriate mounting plate
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)•Without integrated damper•Without self-closing mechanism
(without spring)
110°
ORDER INFORMATION
Door overlay View CrankingDamper
without spring
PUItem No.
with withoutClick-on
Screw fixing
Full overlay 1 0
■ - - 25 F028138154213
- ■ - 25 F045138061213
- ■ ■ 25 F046138245213
Overlay 1 3
■ - - 25 F028138155213
- ■ - 25 F045138062213
- ■ ■ 25 F046138246213
Half overlay 2 9.5
■ - - 25 F028138156213
- ■ - 25 F045138063213
- ■ ■ 25 F046138247213
Inset 2 19
■ - - 25 F028138157213
- ■ - 25 F045138064213
- ■ ■ 25 F0461382482131 Cup material: Zamak, nickel-plated / Arm material: steel, nickel-plated2 Cup material: Zamak, nickel-plated / Arm material: Zamak, nickel-plated
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
ACCESSORIES
Designation PU Item No.
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Housing fixing screw M 3 x 6
500 F069073405256
Designation PU Item No.
TIOMOS 110 AL 110° aluminium frame hinge (frame thicknesses up to 24 mm)
COVER CAPS
Designation Cranking Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
0/3/9.5/19 On request 100/1000 F072135500547
Hinge arm cover capSteel, long, nickel-plated, not imprinted
0, 3 On request 100/1000 F072135504547
23
INSTALLATION INFORMATION All dimensions in millimetres
Full overlay K0 Overlay K3 Half overlay K9.5 Inset1 K19
84.5
19
24
F12
1784
.5
19
24
14
F15
84.5
19
F21.5
7.5
31 40.5
31F
86
19
Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 21 Set mounting plate back by door
thickness +1.5 mm
Doo
r ov
erla
y
0Cup distance
19.0 017.0 216.0 315.0 3.5
Mounting plate height
Doo
r ov
erla
y
3Cup distance
16.0 014.0 213.0 312.5 3.5
Mounting plate height
Doo
r ov
erla
y9.5
Cup distance
9.5 07.5 26.5 36.0 3.5
Mounting plate height
Doo
r re
veal
19Cup distance
0.0 02.0 23.0 33.5 3.5
Mounting plate height
MINIMUM REVEAL
Fram
e th
ickn
ess
Cup distance18 19 20 21 22
24.0 2.4 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
INSTALLATION DIMENSIONS Hinge dimensions and reveal calculation with factory setting.
Fixing screws are not included.
M 3 x 6
min. 13.5
42+0.2
10.5
±0.1Ø 3.2
90°
1.3
15±0.2
16.5
1.3
10.5
±0.1
16+0.2
5 ±0.1
15 ±0.2
28±0.1
max. 22
max
. 24
16.5 ±0.1
min.
TIOMOS 110 AL 110° ALUMINIUM FRAME HINGE
24
• Hinge for blind corner constructions•Opening angle 110°•Convenient depth adjustment
via worm gear•3-dimensional adjustment with
appropriate mounting plate•Minimum reveals
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)•Without integrated damper•Without self-closing mechanism (without
spring)
110°
ORDER INFORMATION FOR DRILLING PATTERN 45/9.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Inset 1
■ - - 25 F028138536213 F028138546213 F017139342213
- ■ - 25 F045138474213 F045138484213 F034139313213
- ■ ■ 25 F046138596213 – –1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
ACCESSORIES
Designation PU Item No.
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Countersunk wood screw Ø 3.5 x 15 mm
5000 F146073976256
Designation PU Item No.
TIOMOS 110/90E 110° blind corner hinge (inset)
COVER CAPS
Designation Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
On request 100/1000 F072135500547
Hinge arm cover capSteel, long, nickel-plated, not imprinted
On request 100/1000 F072135504547
Hinge cup cover capSteel, nickel-plated, not imprinted
On request 50/500 F072135503540
25
INSTALLATION INFORMATION All dimensions in millimetres
Inset
74.5min. 90
X31
25.5 3-7
F
X
Dril
ling
dist
. (X) Cup distance
4 5 6 728.0 1 027.0 2 1 026.0 3 2 1 0
Door reveal
X
Dril
ling
dist
. (X) Cup distance
4 5 6 711.0 1 010.0 2 1 09.0 3 2 1 0
Door revealMounting plate height 3
MINIMUM REVEAL
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 2.4 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
NOTES
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
Use standard mounting plate height 3 to ensure that door is flush fitting.
Hinge dimensions and reveal calculation with factory setting.
Door protrudes inwards when fully opened.
DRILLING PATTERNS 45/9.5
Screw fixing Press fitting
9.5
45
35+0.1
45
8 9.5
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
TIOMOS 110/90E 110° bLIND CORNER HINGE
26
ORDER INFORMATION FOR DRILLING PATTERN 48/9
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Inset 1
■ - - 25 F028138110213 F028138120213 F017139342213
- ■ - 25 F045138017213 F045138027213 F034139313213
- ■ ■ 25 F046138201213 – –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/9
Screw fixing Press fitting
9
48
35+0.1
48
8 9
35+0.1
Combination drilling pattern for Impresso
48
8 9
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 42/11
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Inset 1
■ - - 25 F028138354213 F028138364213 F017139427213
- ■ - 25 F045138292213 F045138302213 F034139398213
- ■ ■ 25 F046138414213 – –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 42/11
Screw fixing Press fitting
11
42
35+0.1
42
8 11
35+0.1
Combination drilling pattern for Impresso
42
8 11
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/90E 110° blind corner hinge (inset) other drilling patterns
27
ORDER INFORMATION FOR DRILLING PATTERN 52/5.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Inset 1
■ - - 25 F028138718213 F028138728213 F017139512213
- ■ - 25 F045138656213 F045138666213 F034139483213
- ■ ■ 25 F046138778213 – –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 52/5.5
Screw fixing Press fitting
52
5.5
35+0.1
10
52
5.5
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 635+0.1
CUP DIMENSIONS
40 (4
0.5)
67 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
40 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 48/6
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Inset 1
■ - - 25 F028138900213 F028138910213 F017139512213
- ■ - 25 F045138838213 F045138848213 F034139483213
- ■ ■ 25 F046138960213 – –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/6
Screw fixing Press fitting
6
35+0.1
48 48
10 6
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/90E 110° bLIND CORNER HINGE
28
•For 30° angled cabinets•Opening angle 110°•Convenient depth adjustment
via worm gear •3-dimensional adjustment with
appropriate mounting plate•Minimum reveals
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)•Without integrated damper•Without self-closing mechanism
(without spring)
110°
ORDER INFORMATION FOR DRILLING PATTERN 45/9.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138529213 F017139335213
- ■ - 25 F045138467213 F034139306213
- ■ ■ 25 F046138589213 –1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
COVER CAPS
Designation Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
On request 100/1000 F072135500547
Hinge cup cover capSteel, nickel-plated, not imprinted
On request 50/500 F072135503540
ACCESSORIES
Designation PU Item No.
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Countersunk wood screw Ø 3.5 x 15 mm
5000 F146073976256
Designation PU Item No.
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/30A +30° angle corner cabinet hinge (overlay)
29
INSTALLATION INFORMATION All dimensions in millimetres
Overlay 1
19
1.519
X +
47.5
X
6.5
417.5
5
26
19
1.5
X
1932
X +
47.5
0
410.5
11
19
1.5 3.5
0X +
47.5
X
35 16
6.6
14
Mounting plate height 0 Mounting plate height 6 Mounting plate height 9
Doo
r ov
erla
y
Cup distance3 4 5 6 7
20.5 019.5 018.5 0 217.5 0 2 316.5 0 3.516.0 2 315.5 3.515.0 2 314.5 3.514.0 2 313.5 3.513.0 312.5 3.5 611.5 610.5 6
Mounting plate height
Dimensions for cross mounting plates fixing distance 37
Mounting plate height0 2 3 3.5 6
X 34.0 33.0 32.0 32.0 30.5Cross mounting plate position (X)
Dimensions for linear mounting plates
Mounting plate height0 2 3 3.5
X 17.0 16.0 15.0 15.0Linear mounting plate position (X)
X X
MINIMUM GAP
Doo
r ov
erla
y
Cup distance3 4 5 6 7
24.0 1.0 1.0 1.0 1.2 2.122.0 1.0 1.0 1.0 1.0 1.521.0 1.0 1.0 1.0 1.0 1.220.0 1.0 1.0 1.0 1.0 1.019.0 1.0 1.0 1.0 1.0 1.018.0 1.0 1.0 1.0 1.0 1.017.0 1.0 1.0 1.0 1.0 1.016.0 1.0 1.0 1.0 1.0 1.0
Minimum gap
MINIMUM REVEAL
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 2.4 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
NOTES
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
Hinge dimensions and reveal calculation with factory setting.
DRILLING PATTERNS 45/9.5
Screw fixing
9.5
45
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
TIOMOS 110/30A +30° ANGLE CORNER CAbINET HINGE
30
ORDER INFORMATION FOR DRILLING PATTERN 48/9
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138103213 F017139335213
- ■ - 25 F045138010213 F034139306213
- ■ ■ 25 F046138194213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/9
Screw fixing
9
48
35+0.1
Combination drilling pattern for Impresso
48
8 9
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 42/11
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138347213 F017139420213
- ■ - 25 F045138285213 F034139391213
- ■ ■ 25 F046138407213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 42/11
Screw fixing
11
42
35+0.1
Combination drilling pattern for Impresso
42
8 11
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/30A +30° angle corner cabinet hinge (overlay)
31
ORDER INFORMATION FOR DRILLING PATTERN 52/5.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138711213 F017139505213
- ■ - 25 F045138649213 F034139476213
- ■ ■ 25 F046138771213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 52/5.5
Screw fixing
52
5.5
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 635+0.1
CUP DIMENSIONS
40 (4
0.5)
67 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
40 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 48/6
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138893213 F017139505213
- ■ - 25 F045138831213 F034139476213
- ■ ■ 25 F046138953213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/6
Screw fixing
6
35+0.1
48
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/30A +30° ANGLE CORNER CAbINET HINGE
32
•For 30° angled cabinets•Opening angle 110°•Convenient depth adjustment
via worm gear•3-dimensional adjustment with
appropriate mounting plate•Minimum reveals
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)•Without integrated damper•Without self-closing mechanism
(without spring)
110°
ORDER INFORMATION FOR DRILLING PATTERN 45/9.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138530213 F017139336213
- ■ - 25 F045138468213 F034139307213
- ■ ■ 25 F046138590213 –1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
COVER CAPS
Designation Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
On request 100/1000 F072135500547
Hinge cup cover capSteel, nickel-plated, not imprinted
On request 50/500 F072135503540
ACCESSORIES
Designation PU Item No.
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Countersunk wood screw Ø 3.5 x 15 mm
5000 F146073976256
Designation PU Item No.
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/30E +30° angle corner cabinet hinge (inset)
33
INSTALLATION INFORMATION All dimensions in millimetres
Inset
X
52.5
X +
47.5
19
1.34
32
19
Dimensions for cross mounting platesfixing distance 37
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
22 63.5 61.521 62.520 61.5 60.019 61.0 60.018 59.0 59.017 58.016 57.5 56.515 57.5 55.5
Cross mounting plate position (X)
Mounting plate height 9
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
22 9.5 1221 920 1219 8 9 9.518 8 917 9.516 8 9.515 6 9
Mounting plate height
X
MINIMUM REVEAL
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 2.4 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.615.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
NOTES
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
For door thicknesses of 22 mm and above a trial fitting is recommended.
DRILLING PATTERNS 45/9.5
Screw fixing
9.5
45
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
TIOMOS 110/30E +30° ANGLE CORNER CAbINET HINGE
34
ORDER INFORMATION FOR DRILLING PATTERN 48/9
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138104213 F017139336213
- ■ - 25 F045138011213 F034139307213
- ■ ■ 25 F046138195213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/9
Screw fixing
9
48
35+0.1
Combination drilling pattern for Impresso
48
8 9
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 42/11
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138348213 F017139421213
- ■ - 25 F045138286213 F034139392213
- ■ ■ 25 F046138408213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 42/11
Screw fixing
11
42
35+0.1
Combination drilling pattern for Impresso
42
8 11
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/30E +30° angle corner cabinet hinge (inset)
35
ORDER INFORMATION FOR DRILLING PATTERN 52/5.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138712213 F017139506213
- ■ - 25 F045138650213 F034139477213
- ■ ■ 25 F046138772213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 52/5.5
Screw fixing
52
5.5
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 635+0.1
CUP DIMENSIONS
40 (4
0.5)
67 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
40 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 48/6
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138894213 F017139506213
- ■ - 25 F045138832213 F034139477213
- ■ ■ 25 F046138954213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/6
Screw fixing
6
35+0.1
48
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/30E +30° ANGLE CORNER CAbINET HINGE
36
•For 37° angled cabinets•Opening angle 110°•Convenient depth adjustment
via worm gear•3-dimensional adjustment with
appropriate mounting plate•Minimum reveals
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)•Without integrated damper•Without self-closing mechanism
(without spring)
110°
ORDER INFORMATION FOR DRILLING PATTERN 45/9.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138531213 F017139337213
- ■ - 25 F045138469213 F034139308213
- ■ ■ 25 F046138591213 –1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
COVER CAPS
Designation Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
On request 100/1000 F072135500547
Hinge cup cover capSteel, nickel-plated, not imprinted
On request 50/500 F072135503540
ACCESSORIES
Designation PU Item No.
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Countersunk wood screw Ø 3.5 x 15 mm
5000 F146073976256
Designation PU Item No.
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/37A +37° angle corner cabinet hinge (overlay)
37
INSTALLATION INFORMATION All dimensions in millimetres
Overlay 1
1926
X +
47.5
X
1.5
19
8.5
419
2.5
Mounting plate height 0 Mounting plate height 12 Mounting plate height 12
Doo
r ov
erla
y
Cup distance3 4 5 6 7
21.5 021.0 020.0 019.0 018.5 218.0 0 317.5 217.0 316.5 216.0 315.5 215.0 314.5 614.0 313.0 612.0 611.0 610.0 6
Mounting plate height
Dimensions for cross mounting plates fixing distance 37
Mounting plate height0 2 3 3.5 6
X 33.5 32.0 31.0 31.0 29.0Cross mounting plate position (X)
Dimensions for linear mounting plates
Mounting plate height0 2 3 3.5
X 16.5 15.0 14.0 14.0Linear mounting plate position (X)
19
X +
47.5
X
5
0.2
16381.5
15.5
X X
MINIMUM GAP
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 1.0 1.0 1.0 1.2 2.122.0 1.0 1.0 1.0 1.0 1.521.0 1.0 1.0 1.0 1.0 1.220.0 1.0 1.0 1.0 1.0 1.019.0 1.0 1.0 1.0 1.0 1.018.0 1.0 1.0 1.0 1.0 1.017.0 1.0 1.0 1.0 1.0 1.016.0 1.0 1.0 1.0 1.0 1.0
Minimum gap
MINIMUM REVEAL
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 2.4 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
NOTES
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
We recommend a trial fitting.
DRILLING PATTERNS 45/9.5
Screw fixing
9.5
45
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
TIOMOS 110/37A +37° ANGLE CORNER CAbINET HINGE
19
19
38
X +
47.5
X 1.2
7
17
1.5
38
ORDER INFORMATION FOR DRILLING PATTERN 48/9
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138105213 F017139337213
- ■ - 25 F045138012213 F034139308213
- ■ ■ 25 F046138196213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/9
Screw fixing
9
48
35+0.1
Combination drilling pattern for Impresso
48
8 9
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 42/11
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138349213 F017139422213
- ■ - 25 F045138287213 F034139393213
- ■ ■ 25 F046138409213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 42/11
Screw fixing
11
42
35+0.1
Combination drilling pattern for Impresso
42
8 11
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/37A +37° angle corner cabinet hinge (overlay)
39
ORDER INFORMATION FOR DRILLING PATTERN 52/5.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138713213 F017139507213
- ■ - 25 F045138651213 F034139478213
- ■ ■ 25 F046138773213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 52/5.5
Screw fixing
52
5.5
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 635+0.1
CUP DIMENSIONS
40 (4
0.5)
67 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
40 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 48/6
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138895213 F017139507213
- ■ - 25 F045138833213 F034139478213
- ■ ■ 25 F046138955213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/6
Screw fixing
6
35+0.1
48
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/37A +37° ANGLE CORNER CAbINET HINGE
40
•For 37° angled cabinets•Opening angle 110°•Convenient depth adjustment
via worm gear•3-dimensional adjustment with
appropriate mounting plate•Small opening forces•Minimum reveals
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)•Without integrated damper•Without self-closing mechanism
(without spring)
110°
ORDER INFORMATION FOR DRILLING PATTERN 45/9.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138532213 F017139338213
- ■ - 25 F045138470213 F034139309213
- ■ ■ 25 F046138592213 –1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
COVER CAPS
Designation Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
On request 100/1000 F072135500547
Hinge cup cover capSteel, nickel-plated, not imprinted
On request 50/500 F072135503540
ACCESSORIES
Designation PU Item No.
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Countersunk wood screw Ø 3.5 x 15 mm
5000 F146073976256
Designation PU Item No.
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/37E +37° angle corner cabinet hinge (inset)
41
INSTALLATION INFORMATION All dimensions in millimetres
Inset
19
5.51.3
XX
+ 47
.5
55.5
19
33
Dimensions for cross mounting plates fixing distance 37
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
22 59.0 57.5 56.521 57.5 56.520 56.5 55.019 55.018 56.017 54.5 53.016 54.5 54.0 53.015 53.0 52.5
Cross mounting plate position (X)
Mounting plate height 12
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
22 12 14 1521 12 1420 12 1419 1218 917 9.5 1216 8 9 9.515 8 9
Mounting plate height
X
MINIMUM REVEAL
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
22.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.615.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
NOTES
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
For door thicknesses of 22 mm and above a trial fitting is recommended.
DRILLING PATTERNS 45/9.5
Screw fixing
9.5
45
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
TIOMOS 110/37E 37° ANGLE CORNER CAbINET HINGE
42
ORDER INFORMATION FOR DRILLING PATTERN 48/9
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138106213 F017139338213
- ■ - 25 F045138013213 F034139309213
- ■ ■ 25 F046138197213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/9
Screw fixing
9
48
35+0.1
Combination drilling pattern for Impresso
48
8 9
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 42/11
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138350213 F017139423213
- ■ - 25 F045138288213 F034139394213
- ■ ■ 25 F046138410213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 42/11
Screw fixing
11
42
35+0.1
Combination drilling pattern for Impresso
42
8 11
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/37E +37° angle corner cabinet hinge (inset)
43
ORDER INFORMATION FOR DRILLING PATTERN 52/5.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138714213 F017139508213
- ■ - 25 F045138652213 F034139479213
- ■ ■ 25 F046138774213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 52/5.5
Screw fixing
52
5.5
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 635+0.1
CUP DIMENSIONS
40 (4
0.5)
67 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
40 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 48/6
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138896213 F017139508213
- ■ - 25 F045138834213 F034139479213
- ■ ■ 25 F046138956213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/6
Screw fixing
6
35+0.1
48
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/37E +37 ANGLE CORNER CAbINET HINGE
44
•For 45° angled cabinets•Opening angle 110°•Convenient depth adjustment
via worm gear•3-dimensional adjustment with
appropriate mounting plate•Minimum reveals
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)•Without integrated damper•Without self-closing mechanism
(without spring)
110°
ORDER INFORMATION FOR DRILLING PATTERN 45/9.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138533213 F017139339213
- ■ - 25 F045138471213 F034139310213
- ■ ■ 25 F046138593213 –1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
COVER CAPS
Designation Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
On request 100/1000 F072135500547
Hinge cup cover capSteel, nickel-plated, not imprinted
On request 50/500 F072135503540
ACCESSORIES
Designation PU Item No.
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Countersunk wood screw Ø 3.5 x 15 mm
5000 F146073976256
Designation PU Item No.
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/45A +45° angle corner cabinet hinge (overlay)
45
INSTALLATION INFORMATION All dimensions in millimetres
Overlay 1
19
X +
47.5
28
X
416
.5
7
2.5
1936
X +
47.5
X
0
5.56.6
19
1.5
11.5 19
1.5
6.5
2
1640
X +
47.5
X
16.5
0
Mounting plate height 0 Mounting plate height 8 Mounting plate height 12
Doo
r ov
erla
y
Cup distance3 4 5 6 7
19.5 019.018.5 018.017.5 017.016.5 0 216.015.5 0 215.0 314.5 2 3.514.0 313.5 2 3.513.0 312.5 2 3.512.0 311.0 3 610.0 6
Mounting plate height
Dimensions for cross mounting plates fixing distance 37
Mounting plate height0 2 3 3.5 6
X 30.5 28.5 27.5 27.0 24.5Cross mounting plate position (X)
Dimensions for linear mounting plates
Mounting plate height0 2 3 3.5
X 13.5 11.5 10.5 10.0Linear mounting plate position (X)
X X
MINIMUM GAP
Doo
r ov
erla
y
Cup distance3 4 5 6 7
24.0 1.0 1.0 1.0 1.2 2.122.0 1.0 1.0 1.0 1.0 1.521.0 1.0 1.0 1.0 1.0 1.220.0 1.0 1.0 1.0 1.0 1.019.0 1.0 1.0 1.0 1.0 1.018.0 1.0 1.0 1.0 1.0 1.017.0 1.0 1.0 1.0 1.0 1.016.0 1.0 1.0 1.0 1.0 1.0
Minimum gap
MINIMUM REVEAL
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 2.4 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
NOTES
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
From 22 mm door thickness and above, we recommend a trial fitting.
DRILLING PATTERNS 45/9.5
Screw fixing
9.5
45
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
TIOMOS 110/45A +45° ANGLE CORNER CAbINET HINGE
46
ORDER INFORMATION FOR DRILLING PATTERN 48/9
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138107213 F017139339213
- ■ - 25 F045138014213 F034139310213
- ■ ■ 25 F046138198213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/9
Screw fixing
9
48
35+0.1
Combination drilling pattern for Impresso
48
8 9
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 42/11
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138351213 F017139424213
- ■ - 25 F045138289213 F034139395213
- ■ ■ 25 F046138411213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 42/11
Screw fixing
11
42
35+0.1
Combination drilling pattern for Impresso
42
8 11
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/45A +45° angle corner cabinet hinge (overlay)
47
ORDER INFORMATION FOR DRILLING PATTERN 52/5.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138715213 F017139509213
- ■ - 25 F045138653213 F034139480213
- ■ ■ 25 F046138775213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 52/5.5
Screw fixing
52
5.5
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 635+0.1
CUP DIMENSIONS
40 (4
0.5)
67 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
40 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 48/6
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Overlay 1
■ - - 25 F028138897213 F017139509213
- ■ - 25 F045138835213 F034139480213
- ■ ■ 25 F046138957213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/6
Screw fixing
6
35+0.1
48
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/45A +45° ANGLE CORNER CAbINET HINGE
48
•For 45° angled cabinets•Opening angle 110°•Convenient depth adjustment
via worm gear•3-dimensional adjustment with
appropriate mounting plate•Minimum reveals
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)•Without integrated damper•Without self-closing mechanism
(without spring)
110°
ORDER INFORMATION FOR DRILLING PATTERN 45/9.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138534213 F017139340213
- ■ - 25 F045138472213 F034139311213
- ■ ■ 25 F046138594213 –1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
COVER CAPS
Designation Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
On request 100/1000 F072135500547
Hinge cup cover capSteel, nickel-plated, not imprinted
On request 50/500 F072135503540
ACCESSORIES
Designation PU Item No.
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Countersunk wood screw Ø 3.5 x 15 mm
5000 F146073976256
Designation PU Item No.
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/45E +45° angle corner cabinet hinge (inset)
49
INSTALLATION INFORMATION All dimensions in millimetres
Inset
XX +
47.5
1.2
195.5
31.5
1956
Dimensions for cross mounting plates fixing distance 37
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
22 53.021 53.0 51.520 51.0 50.5 50.019 52.0 50.0 49.018 50.5 48.517 49.016 47.515 49.0 46.0
Cross mounting plate position (X)
Mounting plate height 14
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
22 15.521 14 1520 14 15 15.519 12 15 1518 12 1417 1216 1215 9 12
Mounting plate height
X
MINIMUM REVEAL
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 2.4 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
NOTES
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
We recommend a trial fitting.
DRILLING PATTERNS 45/9.5
Screw fixing
9.5
45
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
TIOMOS 110/45E +45° ANGLE CORNER CAbINET HINGE
50
ORDER INFORMATION FOR DRILLING PATTERN 48/9
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138108213 F017139340213
- ■ - 25 F045138015213 F034139311213
- ■ ■ 25 F046138199213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/9
Screw fixing
9
48
35+0.1
Combination drilling pattern for Impresso
48
8 9
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 42/11
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138352213 F017139425213
- ■ - 25 F045138290213 F034139396213
- ■ ■ 25 F046138412213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 42/11
Screw fixing
11
42
35+0.1
Combination drilling pattern for Impresso
42
8 11
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/45E +45° angle corner cabinet hinge (inset)
51
ORDER INFORMATION FOR DRILLING PATTERN 52/5.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138716213 F017139510213
- ■ - 25 F045138654213 F034139481213
- ■ ■ 25 F046138776213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 52/5.5
Screw fixing
52
5.5
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 635+0.1
CUP DIMENSIONS
40 (4
0.5)
67 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
40 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 48/6
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools
Inset 1
■ - - 25 F028138898213 F017139510213
- ■ - 25 F045138836213 F034139481213
- ■ ■ 25 F046138958213 –
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
DRILLING PATTERNS 48/6
Screw fixing
6
35+0.1
48
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Tipmatic 78
Assembly aids 83
Accessories 64
TIOMOS 110/45E +45° ANGLE CORNER CAbINET HINGE
52
•For -15° angled cabinets•Opening angle 120°•Convenient depth adjustment
via worm gear•3-dimensional adjustment with
appropriate mounting plate•Minimum reveals
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)•Without integrated damper
120°
ORDER INFORMATION FOR DRILLING PATTERN 45/9.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1
■ - - 25 F028138555213 F017139347213
- ■ - 25 F045138493213 F034139318213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
Tiomos mounting plates 66
Technical information 72
Accessories 64
Assembly aids 83
ACCESSORIES
Designation PU Item No.
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Countersunk wood screw Ø 3.5 x 15 mm
5000 F146073976256
Designation PU Item No.
TIOMOS 120/-15A –15° angle corner cabinet hinge (overlay)
COVER CAPS
Designation Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
On request 100/1000 F072135500547
Hinge arm cover capSteel, long, nickel-plated, not imprinted
On request 100/1000 F072135504547
Hinge cup cover capSteel, nickel-plated, not imprinted
On request 50/500 F072135503540
53
INSTALLATION INFORMATION All dimensions in millimetres
Overlay 1
1922.5
75°
19
14.5 4
XX
+ 47
.5
17
1.5
Mounting plate height 2
Doo
r ov
erla
y
Cup distance3 4 5 6 7
18.0 017.0 016.0 015.0 014.5 2 314.0 0 3.513.5 2 313.0 3.512.5 2 312.0 3.511.5 3 611.0 3.510.5 3 610.0 3.59.5 68.5 6
Mounting plate height
Dimensions for cross mounting plates fixing distance 37
Mounting plate height0 2 3 3.5 6
X 40 40.5 40.5 41 41.5Cross mounting plate position (X)
Dimensions for linear mounting plates
Mounting plate height0 2 3 3.5
X 23 23.5 23.5 24Linear mounting plate position (X)
XX
MINIMUM REVEAL
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 6.4 5.4 4.4 3.4 2.422.0 3.0 2.0 1.5 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 1.0 1.0 1.0 1.0 1.516.0 1.0 1.0 1.0 1.0 1.0
Minimum reveal (F)
NOTES
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
We recommend a trial fitting.
DRILLING PATTERNS 45/9.5
Screw fixing
9.5
45
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
TIOMOS 120/-15A –15° ANGLE CORNER CAbINET HINGE
54
ORDER INFORMATION FOR DRILLING PATTERN 48/9
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1
■ - - 25 F028138129213 F017139347213
- ■ - 25 F045138036213 F034139318213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
DRILLING PATTERNS 48/9
Screw fixing
9
48
35+0.1
Combination drilling pattern for Impresso
48
8 9
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 42/11
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1
■ - - 25 F028138373213 F017139432213
- ■ - 25 F045138311213 F034139403213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
DRILLING PATTERNS 42/11
Screw fixing
11
42
35+0.1
Combination drilling pattern for Impresso
42
8 11
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Accessories 64
Assembly aids 83
TIOMOS 120/-15A –15° angle corner cabinet hinge (overlay)
55
ORDER INFORMATION FOR DRILLING PATTERN 52/5.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1
■ - - 25 F028138737213 F017139517213
- ■ - 25 F045138675213 F034139488213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
DRILLING PATTERNS 52/5.5
Screw fixing
52
5.5
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
40 (4
0.5)
67 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
40 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 48/6
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1
■ - - 25 F028138919213 F017139517213
- ■ - 25 F045138857213 F034139488213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
DRILLING PATTERNS 48/6
Screw fixing
6
35+0.1
48
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Accessories 64
Assembly aids 83
TIOMOS 120/-15A –15° ANGLE CORNER CAbINET HINGE
56
•For -30° angled cabinets•Opening angle 120°•Convenient depth adjustment
via worm gear•3-dimensional adjustment with
appropriate mounting plate•Minimum reveals
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)•Without integrated damper
120°
ORDER INFORMATION FOR DRILLING PATTERN 45/9.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1
■ - - 25 F028138556213 F017139348213
- ■ - 25 F045138494213 F034139319213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
Tiomos mounting plates 66
Technical information 72
Accessories 64
Assembly aids 83
ACCESSORIES
Designation PU Item No.
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Countersunk wood screw Ø 3.5 x 15 mm
5000 F146073976256
Designation PU Item No.
TIOMOS 120/-30A –30° angle corner cabinet hinge (overlay)
COVER CAPS
Designation Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
On request 100/1000 F072135500547
Hinge arm cover capSteel, long, nickel-plated, not imprinted
On request 100/1000 F072135504547
Hinge cup cover capSteel, nickel-plated, not imprinted
On request 50/500 F072135503540
57
INSTALLATION INFORMATION All dimensions in millimetres
Overlay 1
19
17.5
60°
19
15.5 4
22.5
X +
47.5
X1.
5
Dimensions for cross mounting plates fixing distance 37
Mounting plate height0 2 3 3.5 6
X 53.5 55 55.5 55.5 57Cross mounting plate position (X)
Mounting plate height 2
Doo
r ov
erla
y
Cup distance3 4 5 6 7
19.0 018.0 017.0 016.5 216.0 015.5 215.0 0 314.5 2 3.514.0 313.5 2 3.513.0 312.5 2 3.512.0 3 611.5 3.511.0 3 610.5 3.510.0 69.0 68.0 6
Mounting plate height
Dimensions for linear mounting plates
Mounting plate height0 2 3 3.5
X 36.5 38 38.5 38.5Linear mounting plate position (X)
X X
MINIMUM REVEAL
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 6.4 5.4 4.4 3.4 2.422.0 3.0 2.0 1.5 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 1.0 1.0 1.0 1.0 1.516.0 1.0 1.0 1.0 1.0 1.0
Minimum reveal (F)
NOTES
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
We recommend a trial fitting.
DRILLING PATTERNS 45/9.5
Screw fixing
9.5
45
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
TIOMOS 120/-30A –30° ANGLE CORNER CAbINET HINGE
58
ORDER INFORMATION FOR DRILLING PATTERN 48/9
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1
■ - - 25 F028138130213 F017139348213
- ■ - 25 F045138037213 F034139319213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
DRILLING PATTERNS 48/9
Screw fixing
9
48
35+0.1
Combination drilling pattern for Impresso
48
8 9
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 42/11
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1
■ - - 25 F028138374213 F017139433213
- ■ - 25 F045138312213 F034139404213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
DRILLING PATTERNS 42/11
Screw fixing
11
42
35+0.1
Combination drilling pattern for Impresso
42
8 11
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Accessories 64
Assembly aids 83
TIOMOS 120/-30A –30° angle corner cabinet hinge (overlay)
59
ORDER INFORMATION FOR DRILLING PATTERN 52/5.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1
■ - - 25 F028138738213 F017139518213
- ■ - 25 F045138676213 F034139489213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
DRILLING PATTERNS 52/5.5
Screw fixing
52
5.5
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
40 (4
0.5)
67 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
40 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 48/6
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1
■ - - 25 F028138920213 F017139518213
- ■ - 25 F045138858213 F034139489213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
DRILLING PATTERNS 48/6
Screw fixing
6
35+0.1
48
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Accessories 64
Assembly aids 83
TIOMOS 120/-30A –30° ANGLE CORNER CAbINET HINGE
60
•For -45° angled cabinets•Opening angle 120°•Convenient depth adjustment
via worm gear•3-dimensional adjustment
with appropriate mounting plate•Minimum reveals
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)•Without integrated damper
120°
ORDER INFORMATION FOR DRILLING PATTERN 45/9.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1■ - - 25 F028138557213 F017139349213
- ■ - 25 F045138495213 F034139320213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
Tiomos mounting plates 66
Technical information 72
Accessories 64
Assembly aids 83
ACCESSORIES
Designation PU Item No.
Tipmatic Pin for wooden and aluminium frame doors
25 F069068873213
Countersunk wood screw Ø 3.5 x 15 mm
5000 F146073976256
Designation PU Item No.
TIOMOS 120/-45A –45° angle corner cabinet hinge (overlay)
COVER CAPS
Designation Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
On request 100/1000 F072135500547
Hinge arm cover capSteel, long, nickel-plated, not imprinted
On request 100/1000 F072135504547
Hinge cup cover capSteel, nickel-plated, not imprinted
On request 50/500 F072135503540
61
INSTALLATION INFORMATION All dimensions in millimetres
Overlay 1
19
19 X
9.54
45°X
+ 47
.5
22.5
21.5
1.5
Dimensions for cross mounting plates fixing distance 37
Mounting plate height0 2 3 3.5 6
X 60.5 62.5 63.5 64 66.5Cross mounting plate position (X)
Mounting plate height 2
Doo
r ov
erla
y
Cup distance3 4 5 6 7
12.0 011.5 010.5 09.5 0 28.5 0 28.0 37.5 2 3.57.0 36.5 2 3.56.0 35.5 2 3.55.0 34.5 3.54.0 3 63.5 3.53.0 62.0 61.0 60.0 6
Mounting plate height
Dimensions for linear mounting plates
Mounting plate height0 2 3 3.5
X 43.5 45.5 46.5 47Linear mounting plate position (X)
X X
MINIMUM REVEAL
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 6.4 5.4 4.4 3.4 2.422.0 3.0 2.0 1.5 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 1.0 1.0 1.0 1.0 1.516.0 1.0 1.0 1.0 1.0 1.0
Minimum reveal (F)
NOTES
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
We recommend a trial fitting.
DRILLING PATTERNS 45/9.5
Screw fixing
9.5
45
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
TIOMOS 120/-15A –15° ANGLE CORNER CAbINET HINGE
62
TIOMOS 120/-45A -45° angle corner cabinet hinge (overlay)
ORDER INFORMATION FOR DRILLING PATTERN 48/9
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1
■ - - 25 F028138131213 F017139349213
- ■ - 25 F045138038213 F034139320213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
DRILLING PATTERNS 48/9
Screw fixing
9
48
35+0.1
Combination drilling pattern for Impresso
48
8 9
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 42/11
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1
■ - - 25 F028138375213 F017139434213
- ■ - 25 F045138313213 F034139405213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
DRILLING PATTERNS 42/11
Screw fixing
11
42
35+0.1
Combination drilling pattern for Impresso
42
8 11
35+0.1
45
8 9.5
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Accessories 64
Assembly aids 83
63
TIOMOS 120/-45A -45° ANGLE CORNER CAbINET HINGE
ORDER INFORMATION FOR DRILLING PATTERN 52/5.5
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1
■ - - 25 F028138739213 F017139519213
- ■ - 25 F045138677213 F034139490213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
DRILLING PATTERNS 52/5.5
Screw fixing
52
5.5
35+0.1
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 635+0.1
CUP DIMENSIONS
40 (4
0.5)
67 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
40 (40.5)
ORDER INFORMATION FOR DRILLING PATTERN 48/6
Door overlay ViewDamper
without spring
PUItem No.
with withoutClick-on
Screw fixingImpresso
without tools 2
Overlay 1
■ - - 25 F028138921213 F017139519213
- ■ - 25 F045138859213 F034139490213
1 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated2 available on request
DRILLING PATTERNS 48/6
Screw fixing
6
35+0.1
48
Combination drilling pattern for Impresso
10
52
5.5
35+0.1
48
10 6
35+0.1
CUP DIMENSIONS
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Tiomos mounting plates 66
Technical information 72
Accessories 64
Assembly aids 83
64
HINGE ARM AND HINGE CUP COVER CAPS
View Designation Cranking Imprinted/Embossed PU Item No.
Hinge arm cover capSteel, nickel-plated, not imprinted
0, 3, 9.5, 19 On request 100/1000 F072135500547
Hinge arm cover capSteel, long, nickel-plated, not imprinted
0, 3 On request 100/1000 F072135504547
Hinge cup cover cap steel, nickel-plated, not imprinted
– On request 50/500 F072135503540
OPENING ANGLE REDUCTION CLIP
View Designation PU Item No. Opening angle reduction clip 85° Can be used for all standard 110° and 120° Tiomos hinges. Prevents the door from colliding with kitchen unit fronts or walls (when fitted at corners). Easy fitting without tools. Steel, without nickel-plating
50/500 F072135751540
Opening angle reduction clip 120° Can be used for all Tiomos 160° wide angle hinges. Prevents the door from colliding with kitchen unit fronts or walls (when fitted at corners). Easy fitting without tools. Plastic, black
50/500 F072135753540
FIXING SCREWS, DOWELS
View Designation PU Item No.
Flat head Euro screw, nickel-plated, Ø 6.3 x 10.5 mm 5000 F072135768256
Flat head Euro screw, nickel-plated, Ø 6.3 x 13.5 mm 5000 F072135309256
Countersunk Euro screw, nickel-plated, Ø 6.3 x 10.5 mm 5000 F072135779256
Countersunk Euro screw, nickel-plated, Ø 6.3 x 13.5 mm 5000 F069135297256
Chipboard screw, nickel-plated, Ø 3.5 x 15 mm 5000 F146073976256
Steel housing fixing screw for aluminium frame hinge, nickel-plated, M 3 x 6 mm
500 F069073405240
Dowel for hinge cup, plastic PA 6.6, Ø 8 x 13.2 mm 100 F072135773223
TIOMOS ACCESSORIESFor Tiomos hinges
65
ASSEMbLY INSTRUCTIONS All dimensions in millimetres
Opening angle reduction clip 85° Opening angle reduction clip 120°
85°
9
120°
TIOMOS ACCESSORIESFOR TIOMOS HINGES
66
1
32
ORDER INFORMATION
1D CROSS MOUNTING PLATE, 4-POINT FIXING
For screw fixing 37/32 Height PU Item No.
• Steel, nickel-plated• Fixing with wood screws
Ø 3.5 x 15 mm (see page 66)
• Convenient height adjustment (HV) via worm gear
32
37
20 32
0 50 F058139746217
2 50 F058139747217
3 50 F058139748217
3.5 50 F058139749217
1D CROSS MOUNTING PLATE, 4-POINT FIXING
With pre-assembled Euro screws (13.5 mm) 37/32 Height PU Item No.
• Steel, nickel-plated• Fixing with pre-assembled
Euro screws• Convenient height adjustment
(HV) via worm gear Ø 5
32
37 12(Ø 6.3 x 13.5)
20 32
0 50 F058139761217
2 50 F058139762217
3 50 F058139763217
3.5 50 F058139764217
1D CROSS MOUNTING PLATE, 4-POINT FIXING, FOR TWIN APPLICATION
With pre-assembled Euro screws (10 mm) 37/32 Height PU Item No.
• Steel, nickel-plated• Fixing with pre-assembled
Euro screws• Convenient height adjustment
(HV) via worm gear• For twin application Ø 5
7.5(Ø 6.3 x 10)
32
37
20 32
0 50 F058139863217
2 50 F058139864217
3 50 F058139865217
3.5 50 F058139866217
1D CROSS MOUNTING PLATE, 4-POINT FIXING
For press fitting 37/32 Height PU Item No.
• Steel, nickel-plated• Fixing with Ø 10 mm dowel• Convenient height adjustment
(HV) via worm gear• Do not use a hammer for in-
serting the mounting plate. Ø 10
32
37 12
20 32
0 50 F058139751217
2 50 F058139752217
3 50 F058139753217
3.5 50 F058139754217
1 2 3(HV) Height adjustment+/-2 mm
(SV) Side adjustment+/-2 mm
(TV)Depthadjustment+3/-2 mm
All adjustments can be carried out independently of each other.
MOUNTING PLATES For Tiomos hinges
67
1
32
ORDER INFORMATION
1D CROSS MOUNTING PLATE, 2-POINT SCREW FIXING
For screw fixing 37/32 Height PU Item No.
• Zamak/steel, nickel-plated• Fixing with wood screws
(3.5 x 15 mm)• Convenient height adjustment
(HV) via worm gear
32
37 Ø 3.5 x 15
X
6 50 F058139892217
8 50 F058139886217
9 50 F058139887217
9.5 50 F058139888217
12 50 F058139893217
14 50 F058139889217
15 50 F058139890217
15.5 50 F058139891217
19 50 F058139894217
21 50 F058139895217
1D CROSS MOUNTING PLATE, 2-POINT FIXING
With pre-assembled Euro screws (13.5 mm) 37/32 Height PU Item No.
• Zamak/steel, nickel-plated• Fixing with pre-assembled
Euro screws• Convenient height adjustment
(HV) via worm gear
Ø 5
32
37 12(Ø 6.3 x 13.5)
X
6 50 F058139873217
8 50 F058139880217
9 50 F058139881217
9.5 50 F058139882217
12 50 F058139874217
14 50 F058139883217
15 50 F058139884217
15.5 50 F058139885217
19 50 F058139875217
21 50 F058139896217
1D CROSS MOUNTING PLATE, 4-POINT FIXING (available on request)
With pre-assembled Euro screws (13.5 mm) 28/32 Height PU Item No.
• Steel, nickel-plated• Fixing with pre-assembled
Euro screws• Convenient height adjustment
(HV) via worm gear Ø 5
32
12(Ø 6.3 x 13.5)
20 32
280 50 F058139811217
2 50 F058139812217
3 50 F058139813217
3.5 50 F058139814217
1 2 3(HV) Height adjustment+/-2 mm
(SV) Side adjustment+/-2 mm
(TV)Depthadjustment+3/-2 mm
All adjustments can be carried out independently of each other.
TIOMOS MOUNTING PLATES
68
3
2
1
ORDER INFORMATION
ECO CROSS MOUNTING PLATE, 3-POINT FIXING
For screw fixing 37/32 Height PU Item No.
• Steel, nickel-plated• Fixing with wood screws
Ø 3.5 x 15 mm (see page 66)
• Height adjustment (HV) via slot
32
37 26-2 50 F058139720217
0 50 F058139721217
2 50 F058139722217
3 50 F058139723217
3.5 50 F058139724217
ECO CROSS MOUNTING PLATE, 3-POINT FIXING
With pre-assembled pan head Euro screws (13.5 mm) 37/32 Height PU Item No.
• Steel, nickel-plated• Fixing with pre-assembled
pan head Euro screws• Height adjustment (HV)
via slotØ 5
32
37 12(Ø 6.3 x 13.5)
26
-2 50 F058139735217
0 50 F058139736217
2 50 F058139737217
3 50 F058139738217
3.5 50 F058139739217
ECO CROSS MOUNTING PLATE, 3-POINT FIXING, FOR TWIN APPLICATION
With pre-assembled pan head Euro screws (10.5 mm) 37/32 Height PU Item No.
• Steel, nickel-plated• Fixing with pre-assembled
pan head Euro screws• Height adjustment (HV)
via slot• For twin application
7.5(Ø 6.3 x 10.5)
32
37
Ø 5
26-2 50 F058139857217
0 50 F058139858217
2 50 F058139859217
3 50 F058139860217
3.5 50 F058139861217
1 2 3(HV) Height adjustment+/-2.5 mm
(SV) Side adjustment+/-2 mm
(TV)Depthadjustment+3/-2 mm
All adjustments can be carried out independently of each other.
MOUNTING PLATES For Tiomos hinges
69
3
2
1
1
32
ORDER INFORMATION
ECO CROSS MOUNTING PLATE, 3-POINT FIXING
For press fitting 37/32 Height PU Item No.
• Steel, nickel-plated• Fixing with Ø 10 mm dowel• Height adjustment (HV)
via slot• Do not use a hammer for in-
serting the mounting plate. Ø 10
32
37 1226-2 50 F058139725217
0 50 F058139726217
2 50 F058139727217
3 50 F058139728217
3.5 50 F058139729217
ECO CROSS MOUNTING PLATE, 3-POINT FIXING
With pre-assembled pan head Euro screws (13.5 mm) 28/32 Height PU Item No.
• Steel, nickel-plated• Fixing with pre-assembled
pan head Euro screws• Height adjustment (HV)
via slotØ 5
32
12(Ø 6.3 x 13.5)
3528
-2 50 F058139785217
0 50 F058139786217
2 50 F058139787217
3 50 F058139788217
3.5 50 F058139789217
1D LINEAR MOUNTING PLATE, 2-POINT FIXING
For screw fixing 20/32 Height PU Item No.
• Steel, nickel-plated• Fixing with wood screws
Ø 3.5 x 15 mm or with Euro screws Ø 6.3 x 13.5 mm (see page 66)
• Convenient height adjustment (HV) via worm gear
20 32
Ø 3.5 0 50 F059139701217
2 50 F059139702217
3 50 F059139703217
3.5 50 F059139704217
1D LINEAR MOUNTING PLATE, 2-POINT FIXING
For press fitting 20/32 Height PU Item No.
• Steel, nickel-plated• Fixing with Ø 10 mm dowels• Convenient height adjustment
(HV) via worm gear• Do not use a hammer for in-
serting the mounting plate.
20 32
1013
0 50 F059139706217
2 50 F059139707217
3 50 F059139708217
3.5 50 F059139709217
1 2 3(HV) Height adjustment+/-2.5 mm
(SV) Side adjustment+/-2 mm
(TV)Depthadjustment+3/-2 mm
All adjustments can be carried out independently of each other.
TIOMOS MOUNTING PLATES
70
MOUNTING PLATES For Tiomos hinges
1
32
1
32
ORDER INFORMATION
1D DELTA MOUNTING PLATE, 2-POINT FIXING
For screw fixing 9.5/32 Height PU Item No.
• Steel, nickel-plated• Fixing with wood screws
Ø 3.5 x 15 mm• Convenient height adjustment
(HV) via worm gear
32
9.51.5 50 F058139825217
3.5 50 F058139826217
4.5 50 F058139827217
5 50 F058139828217
INSET BEADED MOUNTING PLATE FOR FRAME CONSTRUCTION, 3-POINT FIXING
For screw fixing 10/32 Height PU Item No.
• For inset doors• To be used with hinges with
cranking 9.5• Steel/Zamak, nickel-plated• Fixing with pan head wood
screws• Convenient height adjustment
(HV) via worm gear
10
3248
7.5
21.5
0 50 F058139831217
1 2 3(HV) Height adjustment+/-2 mm
(SV) Side adjustment+/-2 mm
(TV)Depthadjustment+3/-2 mm
All adjustments can be carried out independently of each other.
71
TIOMOS MOUNTING PLATES
ORDER INFORMATION
+5° WEDGE
For screw fixing 37 /32 PU Item No.
• Zamak, nickel-plated• For placing under cross
mounting plates• Can be stacked (max. 3)
32
1
X
5°50 F072135757217
-5° WEDGE
For screw fixing 37 /32 PU Item No.
• Zamak, nickel-plated• For placing under cross
mounting plates• Cannot be stacked
32
X
1
5°
50 F072135758217
1 2 3(HV) Height adjustment+/-2 mm
(SV) Side adjustment+/-2 mm
(TV)Depthadjustment+3/-2 mm
All adjustments can be carried out independently of each other.
72
NUMbER OF HINGES PER DOOR
DescriptionThe number of hinges is determined by the door height, door weight, quality of the material and the fixing of the cup and mounting plate.
The load and height data refer to 600 mm standard door widths. In case of doubt, the number of hinges should be determined with a trial fitting.
Example:For a door measuring 2000 x 600 mm and a weight of 13 kg, we recommend 4 hinges!
The table is applicable to hinges withand without integrated damper!
2 3 4 5
6 10 17 22
900
1600
2000
2500
600 mm
kg
mm
TOOL-FREE DAMPER ADJUSTMENT
Light setting ➀ Medium setting (factory setting) ➁ Strong setting ➂
Adjustment lever points• Towards cabinet wall
Suitable for:• Small, light-weight doors
Adjustment lever points• Downwards when fitted on the left, and
upwards when fitted on the right Suitable for:• Standard doors
Adjustment lever points• Into the cabinet
Suitable for:• Large, heavy doors
The damping force of each hinge can be set individually. A simple lever adjustment is all that is required to increase or reduce the damping force as required.
TECHNICAL INFORMATION For Tiomos hinges
73
DOOR ADJUSTMENTS (APPLIES TO ALL TIOMOS HINGES)
DescriptionSide adjustment with limit stop +/- 2 mm
Convenient depth adjustment via worm gear +3/-2 mm
Height adjustment with mounting plate +/- 2 mm
The height adjustment option de-pends on the type of mounting plate. All adjustments can be carried out independently of each other.
DOOR REVEAL AND MINIMUM REVEAL
Description Full overlay / overlay door Half overlay door Inset doorThe reveal is the distance between two doors or between the door and the cabinet side wall.
The minimum reveal (F) is the distance required between two doors or between door and side wall so that the door can open without colliding.
F 2 x F F
MINIMUM REVEAL TAbLE
Minimum reveal Achievable reveal with inset door
The width of reveal required depends on the thickness of the door.
Example:For a 19 mm thick door and a cup distance of 6 mm, the minimum reveal required is 0.9 mm.
ImportantThe reveal width was calculated for doors with a corner radius of 1 mm!We recommend a trial fitting.
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24 2.4 2.1 2.1 2.1 2.0
22 1.6 1.6 1.6 1.5 1.5
21 1.4 1.3 1.3 1.3 1.3
20 1.1 1.1 1.1 1.5 1.1
19 0.9 0.9 0.9 0.9 0.9
18 0.7 0.7 0.7 0.7 0.7
17 0.6 0.6 0.6 0.6 0.6
16 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
The table shows the achievable reveal width for inset doors, depending on the cup distance and mounting plate height.
Example:With a cup distance of 6 mm and a mounting plate height of 3 mm, the reveal is 1 mm. This is also called a negative overlay.
Doo
r re
veal
Cup distance3 4 5 6 7
0.0 0 2 3
0.5 3.5
1.0 0 2 3
1.5 3.5
2.0 2 3
3.0 2 3
4.0 3
Mounting plate height
TECHNICAL INFORMATION FOR TIOMOS HINGES
74
MINIMUM GAP
Description Example:The minimum gap is the clearance needed between the front edge of the cabinet and the closed door so that the door can open without hindrance. The factory setting of the gap is 1.5 mm.
The cup distance is the distance between the edge of the door and the edge of the cup hole. TA
1.5
mm
For a 17 mm thick door and a cup distance of 6 mm, the minimum gap is 1.0 mm.
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24 1.0 1.0 1.0 1.2 2.122 1.0 1.0 1.0 1.0 1.521 1.0 1.0 1.0 1.0 1.220 1.0 1.0 1.0 1.0 1.019 1.0 1.0 1.0 1.0 1.018 1.0 1.0 1.0 1.0 1.017 1.0 1.0 1.0 1.0 1.016 1.0 1.0 1.0 1.0 1.0
Minimum gap
DOOR OVERLAY
Description Example:The door overlay (A) is that part of the side wall or frame which is covered by the door.
A
For a hinge with cranking 3, a mounting plate height 2 and a cup distance of 4 mm, the door overlay is 14 mm.
Doo
r ov
erla
y
Cup distance3 4 5 6 7
19.0 018.0 017.0 0 216.516.0 0 2 315.5 3.515.0 0 2 314.5 3.514.0 2 313.5 3.513.0 2 312.5 3.512.0 311.5 3.5
Mounting plate height
DOOR PROTRUSION
DescriptionDoor protrusion (TES) occurs when the door is opened and varies depending on the type of hinge and application.
It is shown on each catalogue page and refers to the factory setting with the respective mounting plate shown. It can be altered by using a different mounting plate height and by changing the side adjust-ment.
TES
TECHNICAL INFORMATION For Tiomos hinges
75
OPTIONS FOR CHANGING THE DOOR OVERLAY
By selecting the cranking By using a mounting plate with a different heightFull overlay (cranking 0) Full overlay
The door overlay (A) is the cup overlay (TAS/factory setting) plus the cup distance (TA).
The dimensions are shown in a table on the respective catalogue page.
FTA
ATAS
Use a hinge with cranking 0 and mounting plate height 00.
Overlay (cranking 3) Overlay 1
The door overlay (A) is the cup overlay (TAS/factory setting) plus the cup distance (TA).
The dimensions are shown in a table on the respective catalogue page.
FTA
ATAS
Use a hinge with cranking 0 and mounting plate height 03.
Half overlay (cranking 9.5) Half overlay
The door overlay (A) is the cup protrusion (TAS/factory setting) plus the cup distance (TA).
The dimensions are shown in a table on the respective catalogue page.
2 x FTA
ATAS
Use a hinge with cranking 0 and mounting plate height 9.5
Inset (cranking 19) Inset
There is no door overlay. The minimum reveal (F) be-tween the side of the cabinet and the door depends on the mounting plate height and the cup distance. The dimensions are shown in a table on the respectivecatalogue page.
F
TATES
Use a hinge with cranking 0 and mounting plate 21.
TECHNICAL INFORMATION FOR TIOMOS HINGES
76
TEST CRITERIA FOR HINGES
Functional testStatic load – verticalAdditional load: 20 kgOpening angle: max. -10°Number: 10
Static load – horizontalForce: 40 NNumber: 10
Endurance testOpening angle: max. -5°Open and close movements: 100,000
45°max. -10°
100 mm
40 N
100 mm
max. -5°
Overload testingVerticalAdditional load: 30 kgOpening angle: max. -10°Number: 10
HorizontalForce: 80 NNumber: 10
Test doorWeight approx. 5.2 kg
45°max. -10°
100 mm
100 mm
600 mm
60 m
m60
mm 19 mm
Salt spray and humidity testBased on DIN ISO 9227 and DIN 6270-2
TECHNICAL INFORMATION For Tiomos hinges
78
•Doors open to a convenient opening angle by gently tapping the front
• All hinges without self-closing mechanism can be used
• Wide catching range of magnet ensures reliable door closing
•The front gap can be adjusted between 2.5 and 5.5 mm using the integrated, self-locking and toolless depth adjustment
•Installation by drilling into the front edge of the cabinet or using an adapter plate
ORDER INFORMATION
Tipmatic Pin View For drilling PU Item No.
• Includes magnet, Ø 15 x 8 mm (hole edge cover 1 mm)• Hole drilled into cabinet front edge• Plastic RAL 7036, platinum grey
1.010
+0.2
-0.1
min. 60
25 F069068873213
Adapter plate for line hole drilling View For Euro screws PU Item No.
• Suitable for 28 and 37 mm hole spacing• Fixing with Euro screws (Ø 6.3 x 13.5 mm)• Plastic RAL 7035, light grey
3728
32 25 F069063310113
Frame adapter plate View For screw fixing PU Item No.
• For quick retrofit installation• Fixing with wood screws (Ø 3.5 x 13 mm)• Plastic RAL 7035, light grey
9.5
32 25 F069063311113
Linear adapter plate View For screw fixing PU Item No.
• Design solution – also for inset installation• Fixing with wood screws (Ø 3.5 x 13 mm)• Plastic RAL 7035, light grey
1732
25 F069063309113
TIPMATIC For aluminium frame and wooden doors without handles
79
INSTALLATION INSTRUCTIONS FOR WOODEN DOORS All dimensions in millimetres
Full overlay Half overlay Inset
10+F
min. 2
Ø 1
5 x
8
F
Sm
in. 8
min
. 60
Ø 10
min
. 2.5
Ø 15max. 2 (S 16)max. 3.5 (S 19)
H/2 S
Ø 15 x 8
S + H/2 Ø 15
min
. 2.5
F
S
AH
min
. 8
max. 11
min. 2
Ø15
x8
min
. 8m
in. 3
Ø 15
TS
APA
= TS
+3
S16AH
max. 11
Drilling into front edge of cabinet Installation with adapter plates Installation with linear adapter plate
INSTALLATION INSTRUCTIONS FOR ALUMINIUM FRAME DOORS
Full overlay Half overlay Inset
9.5
LEV
min
. BO
A =
LEV
+ m
in. 1
0m
in. 1
0
Ø 15 x 8
F
min
. 60
F
S
min
. 8
Ø 10
min
. 2.5
Ø 15
9.5
LEV
min
. BO
A =
LEV
+ m
in. 1
0m
in. 1
0
Ø 15 x 8
F
F
Ø 15
min
. 8
min
. 2.5
min. 8 (S=16)min. 11 (S=19)
S
AH
9.5
LEV
BOA
= L
EV +
min
. 10
min
. 10
Ø 15 x 8
min. 1
min
. 1
min
. 3
Ø 15RAS
APA
= RA
S+3
min
. 8
S16AH
min. 1
Driling into front edge of cabinet Installation with adapter plates Installation with linear adapter plate
LEGEND
S Cabinet side wallAH Adapter heightAPA Adapter plate distanceF Reveal
LEV Length of corner connectorRAS Frame thicknessTS Door thicknessBOA Drilling distance
TIPMATIC FOR ALUMINIUM FRAME AND WOODEN DOORS WITHOUT HANDLES
80
•Doors open to a convenient opening angle by gently tapping the front
• All hinges without self-closing mechanism can be used
• Wide catching range of magnet ensures reliable door closing
•The front gap can be adjusted between 2.5 and 5.5 mm using the integrated, self-locking and toolless depth adjustment
•Installation by drilling into the front edge of the cabinet or using an adapter plate
ORDER INFORMATION
Tipmatic Pin for glass and mirror doors View PU Item No.
• Includes magnet, Ø 20 x 4 mm• Use with linear adapter plate• For glass and mirror doors• Plastic RAL 7036, platinum grey
1.010
+0.2
-0.1
min. 60
25 F069068286213
Linear adpater plate View For screw fixing PU Item No.
• Design solution – also for inset installation• Fixing with wood screws (Ø 3.5 x 13 mm)• Plastic RAL 7035, light grey
1732
25 F069063309113
TIPMATIC For glass and mirror doors without handles
81
INSTALLATION INSTRUCTIONS FOR GLASS AND MIRROR DOORS All dimensions in millimetres
Full and half overlay Inset
F
S -F+12
SØ 20 x 4
min.1
4
min
. 3
min
. 3
4
F
16
Ø 20
S
AH max.12 S
min.1
Ø 20 x 4
16
min.1 Ø 20
GS
APA
= G
S +
8
4
S
AH
Installation with linear adapter plate Installation with linear adapter plate
INSTALLATION ADVICE
Thoroughly degrease the surface before attaching the magnet.
LEGEND
S Cabinet side wallAH Adapter heightGS Glass thicknessAPA Adapter plate distance
TIPMATIC FOR GLASS AND MIRROR DOORS WITHOUT HANDLES
82
Ø 10mm / min. 60mm BTORDER INFORMATION
Drilling jig for adapter plates and Tipmatic Pin PU Item No.
• The Grass drilling jig can be used for all types of adapter plates and for the Tipmatic Pin
• Note: Drill bits are not included.1 F146095470299
Pilot drill bit View PU Item No.
• Ø 3.5 mm 1 F146035692299
Pilot drill bit with stop ring View PU Item No.
• Ø 10 mm 1 F146038823299
Ø 10mm / min. 60mm BT
TIPMATIC Assembly aids
INSTALLATION NOTES All dimensions in millimetres
Recommended positions Front gap adjustment
KOB
EB
SK
Tipmatic Pin
KV
MAG
FSA2.5 - 5.5 mm
Position in the top corner opposite the hinge in the base cabinet
Position in the bottom corner opposite the hinge in the wall cabinet
General advice regarding the installation position:The Tipmatic element is installed opposite the hinge, either by inserting it into a hole in the cabinet front edge or with adapter plates, which are available in different versions.
Adjustment of front gap with integrated toolless depth adjustmentThe front gap can be set to line up with the Tipmatic drawer.
EB Dust panelSK DrawerKOB WorktopBT Drilling depth
FSA Front gap adjustmentMAG Magnet
LEGEND
83
TIOMOS ASSEMbLY AIDS
Assembly aidsfor Tiomos hinges and mounting plates.
Knock-in tool for linear mounting plates (with dowel fastening)
Place knock-in tool on linearmounting plate and drive in.
Mounting plates must notbe driven in using a hammer.
For mounting plate height Item No.
0 / 2 / 3 / 3,5 F146135774299
12 F146135775299
PU 1 piece
Hinge drilling jig 500
DrillingjigforTiomoshingeswithwood screw fixing or pre-assem-bled dowels with drilling pattern 45/9.5 and for cross mounting plates
Item No.
F146135776299
PU 1 set
1 set includes:
1 drilling jig
1 template for cross mounting plates
1 adapter bit for drill
1 drill bit Ø 35 mm
2 drill bits Ø 8 mm
Template for cross mounting plates
Item No.
949.004.05.0062
PU 1 piece
84
DRILLING AND INSERTION MACHINESInsertion dies
Insertion dies For Combipress
• Gearboxcanbeswivelled90°
• Verticalgearboxwith23spindlesandhorizontal
gearbox with 19 spindles, both in 32 mm system
• Digitalpneumaticcontrol
• Varioussidestopsforefficientworking
• Pneumatichold-downblock
• Easytooperate
Insertion die Item No.
for Tiomos 110° hinge F146135759299
for Tiomos linear plate F146135763299
PU 1 piece
All drilling and insertion machines can be found in the Installation Technology brochure, item No. 71114-00
Insertion dies For Flexipress
•22-spindlegearboxcanbeswivelled90˚
•Drillingdepthstopwithscale
•Easytoservice
•Stopguideadjustmentwithhandwheel
•3-spindlehorizontalgearbox
•Easy,logicalhandling=efficientoperation
•Compactdesign,sturdymachineframe
Insertion die Item No.
for Tiomos 110° hinge F146135759299
Universal insertion die for 110°/160° Tiomos hinge F146135761299
for Tiomos linear plate F146135763299
PU 1 piece
Insertion dies For Multiflex
•14-spindleverticalgearboxwhichcanbeswivelled90˚
•Drillingdepthstopwithscale
•Easytoservice
•Stopguideadjustmentwithhandwheel
•3-spindlehorizontalgearbox
•Easy,logicalhandling=efficientoperation
•Compactdesign,sturdymachineframe
Insertion die Item No.
for Tiomos 110° hinge F146135759299
Universal insertion die for 110°/160° Tiomos hinge F146135761299
for Tiomos linear plate F146135763299
PU 1 piece
85
TIPMATIC DRILLING AND INSERTION MACHINES
Insertion dies For Ecopress Vario
• Quick-changegearbox
•Quick-changedrillchuck
• Varioussidestopsforefficientworking
• Pneumatichold-downblock
• Highqualitystandard-developedbyGrass
• Easytooperate
Insertion die Item No.
for 110° Tiomos hinge F146135759299
for Tiomos linear plate F146135762299
PU 1 piece
Insertion dies For Ecopress Pneumatic
• Gearboxwithdrillingdepthstop
• Stopguideadjustmentwithclampinglever
• Pneumaticcontrolsystem
• Hold-downblock
•Easy,logicalhandling=efficientoperation
• Compactdesign
Insertion die Item No.
for Tiomos 110° hinge F146135759299
for Tiomos linear plate F146135762299
PU 1 piece
Insertion dies For Ecopress Manual
• Gearboxwithdrillingdepthstop
• Stopguideadjustmentwithclampinglever
• Hold-downblock
•Easy,logicalhandling=efficientoperation
• Compactdesign
Insertion die Item No.
for Tiomos 110° hinge F146135759299
for Tiomos linear plate F146135762299
PU 1 piece
86
F0171.. Page
Item No. Index
F0171.. Page F0171.. – F0281.. Page F0281.. Page
F017139329217 6
F017139329217 8
F017139330217 6
F017139330217 8
F017139331217 6
F017139331217 8
F017139332217 6
F017139332217 8
F017139335213 28
F017139335213 30
F017139336213 32
F017139336213 34
F017139337213 35
F017139337213 38
F017139338213 40
F017139338213 42
F017139339213 44
F017139339213 46
F017139340213 48
F017139340213 50
F017139342213 24
F017139342213 26
F017139343217 10
F017139343217 12
F017139344217 10
F017139344217 12
F017139345217 10
F017139345217 12
F017139346217 10
F017139346217 12
F017139347213 52
F017139347213 54
F017139347213 62
F017139348213 56
F017139348213 58
F017139349213 60
F017139350213 14
F017139350213 16
F017139351213 16
F017139351213 14
F017139352213 14
F017139352213 16
F017139353217 18
F017139353217 20
F017139354217 18
F017139354217 20
F017139355217 18
F017139355217 20
F017139356217 18
F017139356217 20
F017139414217 8
F017139415217 8
F017139416217 8
F017139417217 8
F017139420213 30
F017139421213 34
F017139422213 38
F017139423213 42
F017139424213 46
F017139425213 50
F017139427213 26
F017139428217 12
F017139429217 12
F017139430217 12
F017139432213 54
F017139432213 62
F017139433213 58
F017139435213 16
F017139436213 16
F017139437213 16
F017139438217 20
F017139439217 20
F017139440217 20
F017139441217 20
F017139499217 9
F017139499217 9
F017139500217 9
F017139500217 9
F017139501217 9
F017139501217 9
F017139502217 9
F017139502217 9
F017139505213 31
F017139505213 31
F017139506213 35
F017139506213 35
F017139507213 39
F017139507213 39
F017139508213 43
F017139508213 43
F017139509213 47
F017139509213 47
F017139510213 51
F017139510213 51
F017139512213 27
F017139512213 27
F017139513217 13
F017139513217 13
F017139514217 13
F017139514217 13
F017139515217 13
F017139515217 13
F017139517213 55
F017139517213 55
F017139517213 63
F017139517213 63
F017139518213 59
F017139518213 59
F017139520213 17
F017139520213 17
F017139521213 17
F017139521213 17
F017139522213 17
F017139522213 17
F017139523217 21
F017139523217 21
F017139524217 21
F017139524217 21
F017139525217 21
F017139525217 21
F017139526217 21
F017139526217 21
F017139555217 13
F017139555217 13
F017139558217 12
F028138093217 8
F028138094217 8
F028138095217 8
F028138096217 8
F028138097217 8
F028138098217 8
F028138099217 8
F028138100217 8
F028138103213 30
F028138104213 34
F028138105213 38
F028138106213 42
F028138107213 46
F028138108213 50
F028138110213 26
F028138120213 26
F028138121217 12
F028138122217 12
F028138123217 12
F028138125217 12
F028138126217 12
F028138127217 12
F028138129213 54
F028138129213 62
F028138130213 58
F028138135213 16
F028138136213 16
F028138137213 16
F028138138213 16
F028138139213 16
F028138140213 16
F028138141217 20
F028138142217 20
F028138143217 20
F028138144217 20
F028138145217 20
F028138146217 20
F028138147217 20
F028138148217 20
F028138154213 22
F028138155213 22
F028138156213 22
F028138157213 22
F028138337217 8
F028138338217 8
F028138339217 8
F028138340217 8
F028138341217 8
F028138342217 8
F028138343217 8
F028138344217 8
87
F0281.. Page F0281.. Page F0281.. Page F0281.. – F0341.. Page
F028138347213 30
F028138348213 34
F028138349213 38
F028138350213 42
F028138351213 46
F028138352213 50
F028138354213 26
F028138364213 26
F028138365217 12
F028138366217 12
F028138367217 12
F028138369217 12
F028138370217 12
F028138371217 12
F028138373213 54
F028138373213 62
F028138374213 58
F028138379213 16
F028138380213 16
F028138381213 16
F028138382213 16
F028138383213 16
F028138384213 16
F028138385217 20
F028138386217 20
F028138387217 20
F028138388217 20
F028138389217 20
F028138390217 20
F028138391217 20
F028138392217 20
F028138519217 6
F028138520217 6
F028138521217 6
F028138522217 6
F028138523217 6
F028138524217 6
F028138525217 6
F028138526217 6
F028138529213 28
F028138530213 32
F028138531213 36
F028138532213 40
F028138533213 44
F028138534213 48
F028138536213 24
F028138546213 24
F028138547217 10
F028138548217 10
F028138549217 10
F028138550217 10
F028138551217 10
F028138552217 10
F028138553217 10
F028138554217 10
F028138555213 52
F028138556213 56
F028138557213 60
F028138561213 14
F028138562213 14
F028138563213 14
F028138564213 14
F028138565213 14
F028138566213 14
F028138567217 18
F028138568217 18
F028138569217 18
F028138570217 18
F028138571217 18
F028138572217 18
F028138573217 18
F028138574217 18
F028138701217 9
F028138702217 9
F028138703217 9
F028138704217 9
F028138705217 9
F028138706217 9
F028138707217 9
F028138708217 9
F028138711213 31
F028138712213 35
F028138713213 39
F028138714213 43
F028138715213 47
F028138716213 51
F028138718213 27
F028138728213 27
F028138729217 13
F028138730217 13
F028138731217 13
F028138733217 13
F028138734217 13
F028138735217 13
F028138737213 55
F028138737213 63
F028138738213 59
F028138743213 17
F028138744213 17
F028138745213 17
F028138746213 17
F028138747213 17
F028138748213 17
F028138749217 21
F028138750217 21
F028138751217 21
F028138752217 21
F028138753217 21
F028138754217 21
F028138755217 21
F028138756217 21
F028138883217 9
F028138884217 9
F028138885217 9
F028138886217 9
F028138887217 9
F028138888217 9
F028138889217 9
F028138890217 9
F028138893213 31
F028138894213 35
F028138895213 39
F028138896213 43
F028138897213 47
F028138898213 51
F028138900213 27
F028138910213 27
F028138911217 13
F028138912217 13
F028138913217 13
F028138915217 13
F028138916217 13
F028138917217 13
F028138919213 55
F028138919213 63
F028138920213 59
F028138925213 17
F028138926213 17
F028138927213 17
F028138928213 17
F028138929213 17
F028138930213 17
F028138931217 21
F028138932217 21
F028138933217 21
F028138934217 21
F028138935217 21
F028138936217 21
F028138937217 21
F028138938217 21
F028139017217 12
F028139018217 12
F028139022217 13
F028139023217 13
F028139027217 12
F028139028217 12
F028139032217 13
F028139033217 13
F034139300217 6
F034139300217 8
F034139301217 6
F034139301217 8
F034139302217 6
F034139302217 8
F034139303217 6
F034139303217 8
F034139306213 28
F034139306213 30
F034139307213 32
F034139307213 34
F034139308213 36
F034139308213 28
F034139309213 40
F034139309213 42
F034139310213 44
F034139310213 46
88
Item No. Index
F0341.. Page F0341.. Page F0341.. – F0351.. Page F0351.. Page
F034139311213 48
F034139311213 50
F034139313213 24
F034139313213 26
F034139314217 10
F034139314217 12
F034139315217 10
F034139315217 12
F034139316217 10
F034139316217 12
F034139317217 10
F034139317217 12
F034139318213 52
F034139318213 54
F034139318213 62
F034139319213 56
F034139319213 58
F034139320213 60
F034139321213 14
F034139321213 16
F034139322213 14
F034139322213 16
F034139323213 14
F034139323213 16
F034139324217 18
F034139324217 20
F034139325217 18
F034139325217 20
F034139326217 18
F034139326217 20
F034139327217 18
F034139327217 20
F034139385217 8
F034139386217 8
F034139387217 8
F034139388217 8
F034139391213 30
F034139392213 34
F034139393213 38
F034139394213 42
F034139395213 46
F034139396213 50
F034139398213 26
F034139399217 12
F034139400217 12
F034139401217 12
F034139403213 54
F034139403213 62
F034139404213 58
F034139406213 16
F034139407213 16
F034139408213 16
F034139409217 20
F034139410217 20
F034139411217 20
F034139412217 20
F034139470217 9
F034139470217 9
F034139471217 9
F034139471217 9
F034139472217 9
F034139472217 9
F034139473217 9
F034139473217 9
F034139476213 31
F034139476213 31
F034139477213 35
F034139477213 35
F034139478213 39
F034139478213 39
F034139479213 43
F034139479213 43
F034139480213 47
F034139480213 47
F034139481213 51
F034139481213 51
F034139483213 27
F034139483213 27
F034139484217 13
F034139484217 13
F034139485217 13
F034139485217 13
F034139486217 13
F034139486217 13
F034139488213 55
F034139488213 55
F034139488213 63
F034139488213 63
F034139489213 59
F034139489213 59
F034139491213 17
F034139491213 17
F034139492213 17
F034139492213 17
F034139493213 17
F034139493213 17
F034139494217 21
F034139494217 21
F034139495217 21
F034139495217 21
F034139496217 21
F034139496217 21
F034139497217 21
F034139497217 21
F034139556217 13
F034139556217 13
F034139559217 12
F035139357217 6
F035139357217 8
F035139358217 6
F035139358217 8
F035139359217 6
F035139359217 8
F035139360217 6
F035139360217 8
F035139371217 10
F035139371217 12
F035139372217 10
F035139372217 12
F035139373217 10
F035139373217 12
F035139374217 10
F035139374217 12
F035139378213 14
F035139378213 16
F035139379213 14
F035139379213 16
F035139380213 14
F035139380213 16
F035139381217 18
F035139381217 20
F035139382217 18
F035139382217 20
F035139383217 18
F035139383217 20
F035139384217 18
F035139384217 20
F035139442217 8
F035139443217 8
F035139444217 8
F035139445217 8
F035139456217 12
F035139457217 12
F035139458217 12
F035139463213 16
F035139464213 16
F035139465213 16
F035139466217 20
F035139467217 20
F035139468217 20
F035139469217 20
F035139550213 17
F035139527217 9
F035139527217 9
F035139528217 9
F035139528217 9
F035139529217 9
F035139529217 9
F035139530217 9
F035139530217 9
F035139541217 13
F035139541217 13
F035139542217 13
F035139542217 13
F035139543217 13
F035139543217 13
F035139548213 17
F035139548213 17
F035139549213 17
F035139549213 17
F035139550213 17
F035139551217 21
F035139551217 21
F035139552217 21
F035139552217 21
F035139553217 21
89
F0351.. – F0451.. Page F0451.. Page F0451.. Page F0451.. Page
F035139553217 21
F035139554217 21
F035139554217 21
F035139557217 13
F035139557217 13
F035139560217 12
F045138000217 8
F045138001217 8
F045138002217 8
F045138003217 8
F045138004217 8
F045138005217 8
F045138006217 8
F045138007217 8
F045138010213 30
F045138011213 34
F045138012213 38
F045138013213 42
F045138014213 46
F045138015213 50
F045138017213 26
F045138027213 26
F045138028217 12
F045138029217 12
F045138030217 12
F045138032217 12
F045138033217 12
F045138034217 12
F045138036213 54
F045138036213 62
F045138037213 58
F045138042213 16
F045138043213 16
F045138044213 16
F045138045213 16
F045138046213 16
F045138047213 16
F045138048217 20
F045138049217 20
F045138050217 20
F045138051217 20
F045138052217 20
F045138053217 20
F045138054217 20
F045138055217 20
F045138061213 22
F045138062213 22
F045138063213 22
F045138064213 22
F045138275217 8
F045138276217 8
F045138277217 8
F045138278217 8
F045138279217 8
F045138280217 8
F045138281217 8
F045138282217 8
F045138285213 30
F045138286213 34
F045138287213 38
F045138288213 42
F045138289213 46
F045138290213 50
F045138292213 26
F045138302213 26
F045138303217 12
F045138304217 12
F045138305217 12
F045138307217 12
F045138308217 12
F045138309217 12
F045138311213 54
F045138311213 62
F045138312213 58
F045138317213 16
F045138318213 16
F045138319213 16
F045138320213 16
F045138321213 16
F045138322213 16
F045138323217 20
F045138324217 20
F045138325217 20
F045138326217 20
F045138327217 20
F045138328217 20
F045138329217 20
F045138330217 20
F045138457217 6
F045138458217 6
F045138459217 6
F045138460217 6
F045138461217 6
F045138462217 6
F045138463217 6
F045138464217 6
F045138467213 28
F045138468213 32
F045138469213 36
F045138470213 40
F045138471213 44
F045138472213 48
F045138474213 24
F045138484213 24
F045138485217 10
F045138486217 10
F045138487217 10
F045138488217 10
F045138489217 10
F045138490217 10
F045138491217 10
F045138492217 10
F045138493213 52
F045138494213 56
F045138495213 60
F045138499213 14
F045138500213 14
F045138501213 14
F045138502213 14
F045138503213 14
F045138504213 14
F045138505217 18
F045138506217 18
F045138507217 18
F045138508217 18
F045138509217 18
F045138510217 18
F045138511217 18
F045138512217 18
F045138639217 9
F045138640217 9
F045138641217 9
F045138642217 9
F045138643217 9
F045138644217 9
F045138645217 9
F045138646217 9
F045138649213 31
F045138650213 35
F045138651213 39
F045138652213 43
F045138653213 47
F045138654213 51
F045138656213 27
F045138666213 27
F045138667217 13
F045138668217 13
F045138669217 13
F045138671217 13
F045138672217 13
F045138673217 13
F045138675213 55
F045138675213 63
F045138676213 59
F045138681213 17
F045138682213 17
F045138683213 17
F045138684213 17
F045138685213 17
F045138686213 17
F045138687217 21
F045138688217 21
F045138689217 21
F045138690217 21
F045138691217 21
F045138692217 21
F045138693217 21
F045138694217 21
F045138821217 9
F045138822217 9
F045138823217 9
F045138824217 9
F045138825217 9
F045138826217 9
F045138827217 9
F045138828217 9
90
Item No. Index
F0451.. – F0461.. Page F0461.. Page F0461.. Page F0461.. – F0581.. Page
F045138831213 31
F045138832213 35
F045138833213 39
F045138834213 43
F045138835213 47
F045138836213 51
F045138838213 27
F045138848213 27
F045138849217 13
F045138850217 13
F045138851217 13
F045138853217 13
F045138854217 13
F045138855217 13
F045138857213 55
F045138857213 63
F045138858213 59
F045138863213 17
F045138864213 17
F045138865213 17
F045138866213 17
F045138867213 17
F045138868213 17
F045138869217 21
F045138870217 21
F045138871217 21
F045138872217 21
F045138873217 21
F045138874217 21
F045138875217 21
F045138876217 21
F045139019217 12
F045139020217 12
F045139024217 13
F045139025217 13
F045139029217 12
F045139030217 12
F045139034217 13
F045139035217 13
F046138184217 8
F046138185217 8
F046138186217 8
F046138187217 8
F046138194213 30
F046138195213 34
F046138196213 38
F046138197213 42
F046138198213 46
F046138199213 50
F046138201213 26
F046138212217 12
F046138213217 12
F046138214217 12
F046138226213 16
F046138227213 16
F046138228213 16
F046138232217 20
F046138233217 20
F046138234217 20
F046138235217 20
F046138245213 22
F046138246213 22
F046138247213 22
F046138248213 22
F046138397217 8
F046138398217 8
F046138399217 8
F046138400217 8
F046138407213 30
F046138408213 34
F046138409213 38
F046138410213 42
F046138411213 46
F046138412213 50
F046138414213 26
F046138425217 12
F046138426217 12
F046138427217 12
F046138439213 16
F046138440213 16
F046138441213 16
F046138445217 20
F046138446217 20
F046138447217 20
F046138448217 20
F046138579217 6
F046138580217 6
F046138581217 6
F046138582217 6
F046138589213 28
F046138590213 32
F046138591213 36
F046138592213 40
F046138593213 44
F046138594213 48
F046138596213 24
F046138607217 10
F046138608217 10
F046138609217 10
F046138610217 10
F046138615213 52
F046138616213 56
F046138617213 60
F046138621213 14
F046138622213 14
F046138623213 14
F046138627217 18
F046138628217 18
F046138629217 18
F046138630217 18
F046138761217 9
F046138762217 9
F046138763217 9
F046138764217 9
F046138771213 31
F046138772213 35
F046138773213 39
F046138774213 43
F046138775213 47
F046138776213 51
F046138778213 27
F046138789217 13
F046138790217 13
F046138791217 13
F046138803213 17
F046138804213 17
F046138805213 17
F046138809217 21
F046138810217 21
F046138811217 21
F046138812217 21
F046138943217 9
F046138944217 9
F046138945217 9
F046138946217 9
F046138953213 31
F046138954213 35
F046138955213 39
F046138956213 43
F046138957213 47
F046138958213 51
F046138960213 27
F046138971217 13
F046138972217 13
F046138973217 13
F046138985213 17
F046138986213 17
F046138987213 17
F046138991217 21
F046138992217 21
F046138993217 21
F046138994217 21
F046139021217 12
F046139026217 13
F046139031217 12
F046139036217 13
F046139036217 12
F058139720217 68
F058139721217 68
F058139722217 68
F058139723217 68
F058139724217 68
F058139725217 69
F058139726217 69
F058139727217 69
F058139728217 69
F058139729217 69
F058139735217 68
F058139736217 68
F058139737217 68
F058139738217 68
F058139739217 68
F058139746217 66
F058139747217 66
F058139748217 66
F058139749217 66
91
F0581.. Page F0581.. – F0721.. Page F0721.. – F1460.. Page F1460..– F1461.. Page
F058139751217 66
F058139752217 66
F058139753217 66
F058139754217 66
F058139761217 66
F058139762217 66
F058139763217 66
F058139764217 66
F058139785217 69
F058139786217 69
F058139787217 69
F058139788217 69
F058139789217 69
F058139811217 67
F058139812217 67
F058139813217 67
F058139814217 67
F058139825217 70
F058139826217 70
F058139827217 70
F058139828217 70
F058139831217 70
F058139857217 68
F058139858217 68
F058139859217 68
F058139860217 68
F058139861217 68
F058139863217 66
F058139864217 66
F058139865217 66
F058139866217 66
F058139873217 67
F058139874217 67
F058139875217 67
F058139880217 67
F058139881217 67
F058139882217 67
F058139883217 67
F058139884217 67
F058139885217 67
F058139886217 67
F058139887217 67
F058139888217 67
F058139889217 67
F058139890217 67
F058139891217 67
F058139892217 67
F058139893217 67
F058139894217 67
F058139895217 67
F058139896217 67
F059139701217 69
F059139702217 69
F059139703217 69
F059139704217 69
F059139706217 69
F059139707217 69
F059139708217 69
F059139709217 69
F069063309113 78
F069063309113 80
F069063310113 78
F069063311113 78
F069068286213 80
F069068873213 6
F069068873213 10
F069068873213 14
F069068873213 18
F069068873213 22
F069068873213 24
F069068873213 28
F069068873213 32
F069068873213 36
F069068873213 40
F069068873213 44
F069068873213 48
F069068873213 52
F069068873213 56
F069068873213 60
F069068873213 78
F069073405240 64
F069073405256 22
F069135297256 64
F072135309256 64
F072135500547 6
F072135500547 10
F072135500547 18
F072135500547 22
F072135500547 24
F072135500547 28
F072135500547 32
F072135500547 36
F072135500547 40
F072135500547 44
F072135500547 48
F072135500547 52
F072135500547 56
F072135500547 60
F072135500547 64
F072135503540 6
F072135503540 10
F072135503540 18
F072135503540 24
F072135503540 28
F072135503540 32
F072135503540 36
F072135503540 40
F072135503540 44
F072135503540 48
F072135503540 52
F072135503540 56
F072135503540 60
F072135503540 64
F072135504547 64
F072135751540 6
F072135751540 10
F072135751540 18
F072135751540 64
F072135753540 14
F072135753540 64
F072135755217 71
F072135756217 71
F072135757217 71
F072135758217 71
F072135758217 71
F072135768256 64
F072135773223 64
F072135779256 64
F146035692299 82
F146038823299 82
F146073976256 6
F146073976256 10
F146073976256 14
F146073976256 18
F146073976256 24
F146073976256 28
F146073976256 32
F146073976256 36
F146073976256 40
F146073976256 44
F146073976256 48
F146073976256 52
F146073976256 56
F146073976256 60
F146073976256 64
F146095470299 82
F146101308 84
F146101310 84
F146101312 84
F146101314 84
F147
1014
0800
0–
03|2
011
–60
(Eng
)–G
RASS
Pro
mot
ion
– Su
bjec
t to
chan
ges
and
prin
ting
erro
rs
Grass GmbHMovement SystemsGrass Platz 1A 6973 Höchst, AustriaTel. +43 (0) 5578 701-0Fax +43 (0) 5578 701-59Email [email protected]
www.grass.at
Grass GmbH & Co. KGMovement SystemsEgerländer Strasse 2D 64354 Reinheim, GermanyTel. +49 (0) 6162 802-0Fax +49 (0) 6162 802-219Email [email protected]