P/N 31708250, Twelfth Edition November 2010
Thermo Scientific FLASH 2000 and FLASH 4000Organic Elemental Analyzers
Consumables and Spare Parts Catalog
© 2010 Thermo Fisher Scientific Inc. All rights reserved.
Published by Thermo Fisher Scientific, 19 Mercers Row, Cambridge, CB5 8BZ, UK Tel: +44(0)1223 347400 Fax: +44(0)1223 347403
Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase to use in the product operation. This document is copyright protected and any reproduction of the whole or any part of this document is strictly prohibited, except with the written authorization of Thermo Fisher Scientific Inc.
The contents of this document are subject to change without notice. All technical information in this document is for reference purposes only. System configurations and specifications in this document supersede all previous information received by the purchaser.
Thermo Fisher Scientific Inc. makes no representations that this document is complete, accurate or error-free and assumes no responsibility and will not be liable for any errors, omissions, damage or loss that might result from any use of this document, even if the information in the document is followed properly.
This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a purchaser. This document shall in no way govern or modify any Terms and Conditions of Sale, which Terms and Conditions of Sale shall govern all conflicting information between the two documents.
Release history:
Twelfth Edition, November 2010
For every comment and suggestion plaese contact [email protected]
For Research Use Only. Not for use in diagnostic procedures.
CContents
Part 1 Thermo Scientific FLASH 2000
Chapter 1 CHN Determination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 2 CHN/O Determination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Chapter 3 CHNS Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Chapter 4 CHNS/O Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Chapter 5 S Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Chapter 6 O Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Chapter 7 N Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Chapter 8 N Lubricant Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Chapter 9 NC Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Chapter 10 NCS Determination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Chapter 11 NC-Soils, NC-Sediments, NC-Filters Determinations . . . . . . . . . . . . . . . . 30
Chapter 12 N/Protein, N-Brew Determinations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Chapter 13 FLASH IRMS (NC Determination) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Chapter 14 FLASH HT (O/H and NC Determinations) . . . . . . . . . . . . . . . . . . . . . . . . . . . 36O/H Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36NC Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Chapter 15 Kits of Consumables and Spare Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Kit for 1000 Analyses for FLASH 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . 38Kit for N/Protein Analyses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Kit for 1000 Analyses for FLASH for IRMS and FLASH HT
(NC Determination) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Kit for 1000 Analyses for FLASH for IRMS (NC Determination). . . . . . 43Kit for 1000 Analyses for FLASH HT/HT Plus (NC Determination) . . . 43Kit for 3000 Analyses for FLASH for IRMS and FLASH HT
(NC Determination) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Kit for 3000 Analyses for FLASH HT/HT Plus (NC Determination) . . . 44
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 3
Contents
Kit for 1000 Analyses for FLASH for IRMS and FLASH HT (NCS Determination) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Chapter 16 Reactors, Absorption Filters, GC Columns and Fittings. . . . . . . . . . . . . . . 46Reactors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Adsorption Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Gas Chromatographic Columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Chapter 17 Reagents and Chemicals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52CHN Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52CHN-O Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52CHNS Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53CHNS-O Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53S Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53O Determination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54N Determination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54N Lubricant Determination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54NC Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55NCS Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55NC-Soils, NC-Sediments, NC-Filters Determination . . . . . . . . . . . . . . . 55N/Protein, N-Brew Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56IRMS and HT NC Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Chapter 18 Analytical Standards and Reference Materials . . . . . . . . . . . . . . . . . . . . . 58Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Reference Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59OEA/FPD Reference Solution Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Chapter 19 Adsorber for Fluorine Compounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Chapter 20 FLASH 2000 Upgrade Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Kit for Total Organic Carbon (TOC) in Solid Sample PN 190 041 28 . . 62Conversion Kit from NC to NCS Determination PN 190 042 45 . . . . . 63Conversion Kit from NC to S Determination PN 190 042 40 . . . . . . . . 63Conversion from CHN to CHNS Configuration . . . . . . . . . . . . . . . . . . 64Conversion from CHN/CHNS to Oxygen Configuration. . . . . . . . . . . . 64Sulphur Conversion Kit for FLASH IRMS and FLASH HT PN 190 037 4065
Chapter 21 Sample Containers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Tin Containers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Silver Containers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Chapter 22 Sample Preparation Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Chapter 23 MAS 200R Autosampler for Solid Samples . . . . . . . . . . . . . . . . . . . . . . . . . 72Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Knurled Screws Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Switching Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
4 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
Contents
Chapter 24 NoBlank Sampling Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76For Upgrading FLASH System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77For Updating TC/EA and Previous OEA Models . . . . . . . . . . . . . . . . . . 77No Blank Spare Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Chapter 25 CM2 Manual Sampler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Chapter 26 AI/AS 3000 II Autosampler for Liquids for FLASH 2000 . . . . . . . . . . . . . . . 80
Chapter 27 Accessories for Injection of Liquid and Gas Samples . . . . . . . . . . . . . . . 82
Chapter 28 Resting Foot Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Chapter 29 Recommended Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Chapter 30 FLASH 2000 FPD Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88FPD Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89OEA / FPD Reference Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89OEA / FPD Detector Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Chapter 31 Electronic Flow Controller Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Chapter 32 FLASH 2000 Electronics and Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94Printed Circuit Boards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Chapter 33 Eager Xperience Ethernet A/D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96Ethernet Box Version PN 432 331 37 . . . . . . . . . . . . . . . . . . . . . . . . . . . 96Eager Xperience Hardware Minimum Requirements. . . . . . . . . . . . . . . . 96
Chapter 34 Single to Double Furnace Upgrade Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Chapter 35 Furnaces Transformation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100FLASH 2000 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Transformation Kits Available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101If the User Wants to Add a New Furnace (and Upgrade the Instrument Configuration)
102Transformation Furnace Kits List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103Transformation Furnace Kit: Explanations on Some Items . . . . . . . . . . 107Top Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Furnace Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Bottom Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Bottom Connections for FLASH IRMS and HT (O/H and NC Determinations)109
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 5
Contents
Chapter 36 MAS 200R Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Chapter 37 FLASH 2000 System Qualification Package. . . . . . . . . . . . . . . . . . . . . . . . 112
Part 2 Thermo Scientific FLASH 4000
Chapter 38 FLASH 4000 N/Protein Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Chapter 39 Kit of Consumables for FLASH 4000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Kit for 1000 Analyses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Kit for 5000 Analyses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Kit for 1000 Analyses AI/AS 3000 II . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Chapter 40 Reactor, Crucible, Separation Column and Fittings . . . . . . . . . . . . . . . . . 120Reactor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120Crucible. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120Separation Column . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Chapter 41 Consumables and Miscellanea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122Miscellanea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Chapter 42 Analytical Standards & Reference Material . . . . . . . . . . . . . . . . . . . . . . . 124Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124Reference Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Chapter 43 Sample Preparation Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Sample Containers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Chapter 44 MAS 4000 Autosampler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Chapter 45 AI/AS 3000 II Autosampler for Liquids for FLASH 4000 . . . . . . . . . . . . . . 130
Chapter 46 Recommended Spare Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132Pressure Regulators and Manometer . . . . . . . . . . . . . . . . . . . . . . . . . . . 132Detector Oven. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132Furnace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132EV (electrovalves) Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133Regenerative Carbon Dioxide Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . 133Water Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Chapter 47 Electronic Flow Control Module (EFCt) . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Chapter 48 Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Mains and High Voltage Printed Circuit Boards . . . . . . . . . . . . . . . . . . 136Low Voltage Printed Circuit Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
6 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
Contents
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137Extension Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Part 3 Previous FLASH Configurations
Chapter 49 FLASH EA 1112 Elemental Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140Electronic Flow Controller Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . 140Oxygen Line Purge Kit for FLASH EA 1112 PN 190 042 60 . . . . . . . . 140FLASH EA 1112 System Validation Package . . . . . . . . . . . . . . . . . . . . 141Transformation Furnace Kit: Explanations on Some Items . . . . . . . . . . 142
Appendix A Customer Communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144How to Contact Us . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 7
1 Part
Thermo Scientific FLASH 2000
1
CHN Determination
Table 1. Consumables and Spare Parts for CHN Determination
Refer To: Description Qty Part Number
-- Bottom O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 206 40
-- Top O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 229 10
1 Quartz Wool 5g 338 222 00
2 Chromium Oxide 25g 338 229 00
3 High Quality Copper 50g 338 353 12
4 Silvered Cobaltous-Cobaltic Oxide 25g 338 245 00
R Empty Quartz Reactor Tube 18 mm OD (Set of 2) 1 468 200 70
-- Quartz Crucible 1 252 045 10
-- Prepacked Quartz Reactor CHN/NC - Argon Sealed 1 468 090 09
CC Multiseparation Column (PTFE; 2 m; 6x5 mm) 1 260 082 20
-- Tin Containers 100 240 064 00
-- Forceps 1 205 005 00
-- Spatula 1 205 006 00
-- Cyclohexanone STD 1g 338 224 00
-- Atropine STD 2g 338 244 00
-- Imidazole STD 1g 338 354 30
-- Acetanilide STD 2g 338 367 00
-- Urea STD 2g 338 400 01
-- Nicotinamide STD 2g 338 400 19
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 10
1 CHN Determination
AS. Autosampler R. Reactor
CC. Chromatographic Column TCD. Thermal Conductivity Detector
IMPORTANT If the sample to be analyzed presents particular characteristics (high presence of inorganic material) we suggest to insert the quartz crucible into the oxidation/reduction reactor. In this case it is necessary to eliminate the Quartz Wool between Chromium Oxide and High Quality Copper and between the High Quality Copper and the Cobaltous-Cobaltic Oxide.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 11
2
CHN/O Determination
Table 2. Consumables and Spare Parts for CHN/O Determination
Refer To: Description Qty Part Number
-- Bottom O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 206 40
-- Top O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 229 10
1 Quartz Wool 5g 338 222 00
2 Chromium Oxide 25g 338 229 00
3 High Quality Copper 50g 338 353 12
4 Silvered Cobaltous-Cobaltic Oxide 25g 338 245 00
5 Nickel Plated Carbon 5g 338 238 00
6 Quartz Turning 50g 338 223 00
7 Soda Lime 100g 338 352 35
8 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
-- Nickel Wool 2g 338 250 00
R1/R2 Empty Quartz Reactor Tube 18 mm OD (Set of 2) 1 468 200 70
-- Quartz Crucible 1 252 045 10
-- Prepacked Quartz Reactor CHN/NC - Argon Sealed 1 468 020 09
F Empty Adsorption Filter Tube (Small Size) without Fast Connectors 1 281 131 04
CC1 Multiseparation Column (PTFE; 2 m; 6x5 mm) 1 260 082 20
CC2 Oxygen Separation Column (SS; 1 m; 6x5 mm) 1 260 079 00
-- Tin Containers 100 240 064 00
-- Silver Containers for Oxygen Determination 100 240 054 00
-- Forceps 1 205 005 00
-- Spatula 1 205 006 00
-- Cyclohexanone STD 1g 338 224 00
-- Atropine STD 2g 338 244 00
-- Benzoic Acid STD 2g 338 225 00
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 12
2 CHN/O Determination
-- Imidazole STD 1g 338 354 30
-- Acetanilide STD 2g 338 367 00
-- Urea STD 2g 338 400 01
-- Nicotinamide STD 2g 338 400 19
Table 2. Consumables and Spare Parts for CHN/O Determination (Continued)
AS. Autosampler R1-R2. Reactors
F. Adsorption Filter CC1-CC2. Chromatographic Columns
TCD. Thermal Conductivity Detector
IMPORTANT CHN Determination If the sample to be analyzed presents particular characteristics (high presence of inorganic material) we suggest to insert the quartz crucible into the oxidation/reduction reactor. In this case it is necessary to eliminate the Quartz Wool between Chromium Oxide and High Quality Copper and between the High Quality Copper and the C
IMPORTANT Oxygen Determination If the sample to be analyzed presents particular characteristics (high presence of inorganic material) we suggest to insert the quartz crucible into the reactor of pyrolysis. In this case it is necessary to reduce from 30 mm to 20 mm the Quartz Wool in the lower section of the reactor.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 13
3
CHNS Determination
Table 3. Consumables and Spare Parts for CHNS Determination
Refer To: Description Qty Part Number
-- Bottom O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 206 40
-- Top O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 229 10
1 Quartz Wool 5g 338 222 00
2 Copper Oxide 50g 338 217 10
3 Electrolytic Copper 70g 338 353 13
-- Vanadium Pentoxide 1g 338 375 10
R Empty Quartz Reactor Tube 18 mm OD (Set of 2) 1 468 200 70
R Prepacked Quartz Reactor for CHNS/NCS/S Determinations 1 468 020 15
-- Quartz Crucible 1 252 045 10
CC Packed Column CHNS/NCS (PTFE; 2 m; 6x5 mm) 1 260 082 15
-- Tin Containers 100 240 064 00
-- Forceps 1 205 005 00
-- Spatula 1 205 006 00
-- BBOT STD 2g 338 352 10
-- Sulphanilamide STD 2g 338 251 00
-- L-Cystine STD 2g 338 400 18
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 14
3 CHNS Determination
AS. Autosampler R. Reactor
CC. Chromatographic Column TCD. Thermal Conductivity Detector
IMPORTANT If the sample to be analyzed presents particular characteristics (high presence of inorganic material) we suggest to insert the quartz crucible into the oxidation/reduction reactor. In this case it is necessary to reduce the Quartz Wool between Copper Oxide and Electrolytic Copper up to obtain a thin layer and to reduce the Copper Oxide proportionally as shown in the figure above.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 15
4
CHNS/O Determination
Table 4. Consumables and Spare Parts for CHNS/O Determination
Refer To: Description Qty Part Number
-- Bottom O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 206 40
-- Top O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 229 10
1 Quartz Wool 5g 338 222 00
2 Copper Oxide 50g 338 217 10
3 Electrolytic Copper 70g 338 353 13
4 Nickel Plated Carbon 5g 338 238 00
5 Quartz Turnings 50g 338 223 00
6 Soda Lime 100g 338 352 35
7 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
-- Nickel Wool 2g 338 250 00
-- Vanadium Pentoxide 1g 338 375 10
R1/R2 Empty Quartz Reactor Tube 18 mm OD (Set of 2) 1 468 200 70
R1 Prepacked Quartz Reactor for CHNS/NCS/S Determinations 1 468 020 15
-- Quartz Crucible 1 252 045 10
F Empty Adsorption Filter Tube (Small Size) without Fast Connectors 1 281 131 04
CC1 CHNS/NCS Separation Column (PTFE; 2 m; 6x5 mm) 1 260 082 15
CC2 Oxygen Separation Column (SS; 1m; 6x5 mm) 1 260 079 00
-- Tin Containers 100 240 064 00
-- Silver Containers for Oxygen Determination 100 240 054 00
-- Forceps 1 205 005 00
-- Spatula 1 205 006 00
-- Atropine STD 2g 338 244 00
-- Benzoic Acid STD 2g 338 225 00
-- Sulphanilamide STD 2g 338 251 00
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 16
4 CHNS/O Determination
-- BBOT STD 2g 338 352 10
-- Acetanilide STD 2g 338 367 00
-- Urea STD 2g 338 400 01
-- L-Cystine STD 2g 338 400 18
-- Nicotinamide STD 2g 338 400 19
Table 4. Consumables and Spare Parts for CHNS/O Determination (Continued)
AS. Autosampler R1-R2. Reactors
F. Adsorption Filter CC1-CC2. Chromatographic Columns
TCD. Thermal Conductivity Detector
IMPORTANT CHNS Determination If the sample to be analyzed presents particular characteristics (high presence of inorganic material) we suggest to insert the quartz crucible into the oxidation/reduction reactor. In this case it is necessary to reduce the Quartz Wool between Copper Oxide and Electrolytic Copper up to obtain a thin layer and to reduce the Copper Oxide proportionally as shown in the figure above.
IMPORTANT Oxygen Determination If the sample to be analyzed presents particular characteristics (high presence of inorganic material) we suggest to insert the quartz crucible into the reactor of pyrolysis. In this case it is necessary to reduce from 30 mm to 20 mm the Quartz Wool in the lower section of the reactor
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 17
5
S Determination
Table 5. Consumables and Spare Parts for S Determination
Refer To: Description Qty Part Number
-- Bottom O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 206 40
-- Top O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 229 10
1 Quartz Wool 5g 338 222 00
2 Copper Oxide 50g 338 217 10
3 Electrolytic Copper 70g 338 353 13
4 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
-- Vanadium Pentoxide 1g 338 375 10
R Empty Quartz Reactor Tube 18 mm OD (Set of 2) 1 468 200 70
R Prepacked Quartz Reactor for CHNS/NCS/S Determinations 1 468 020 15
-- Quartz Crucible 1 252 045 10
F Empty Adsorption Filter Tube (Small Size) without Fast Connectors 1 281 131 04
CC Sulphur Separation Column (PTFE; 0.8 m; 6x4 mm) 1 260 078 00
-- Tin Containers 100 240 064 00
-- Forceps 1 205 005 00
-- Spatula 1 205 006 00
-- BBOT STD 2g 338 352 10
-- Sulphanilamide STD 2g 338 251 00
-- L-Cystine STD 2g 338 400 18
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 18
5 S Determination
AS. Autosampler R. Reactor
F. Adsorption Filter CC. Chromatographic Column
TCD. Thermal Conductivity Detector
IMPORTANT If the sample to be analyzed presents particular characteristics (high presence of inorganic material) we suggest to insert the quartz crucible into the oxidation/reduction reactor. In this case it is necessary to reduce the Quartz Wool between Copper Oxide and Electrolytic Copper up to obtain a thin layer and to reduce the Copper Oxide proportionally as shown in the figure above.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 19
6
O Determination
Table 6. Consumables and Spare Parts for O Determination
Refer To: Description Qty Part Number
-- Bottom O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 206 40
-- Top O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 229 10
1 Quartz Wool 5g 338 222 00
2 Nickel Plated Carbon 5g 338 238 00
3 Quartz Turnings 50g 338 223 00
4 Soda Lime 100g 338 352 35
5 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
-- Nickel Wool 2g 338 250 00
R Empty Quartz Reactor Tube 18 mm OD (Set of 2) 1 468 200 70
-- Quartz Crucible 1 252 045 10
F Empty Adsorption Filter Tube (Small Size) without Fast Connectors 1 281 131 04
CC Oxygen Separation Column (SS; 1m; 6x5mm) 1 260 079 00
-- Silver Containers for Oxygen Determination 100 240 054 00
-- Forceps 1 205 005 00
-- Spatula 1 205 006 00
-- Cyclohexanone STD 1g 338 224 00
-- Benzoic Acid STD 2g 338 225 00
-- Sulphanilamide STD 2g 338 251 00
-- BBOT STD 2g 338 352 10
-- Acetanilide STD 2g 338 367 00
-- Urea STD 2g 338 400 01
-- L-Cystine STD 2g 338 400 18
-- Nicotinamide STD 2g 338 400 19
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 20
6 O Determination
AS. Autosampler R. Reactor
F. Adsorption Filter CC. Chromatographic Column
TCD. Thermal Conductivity Detector
IMPORTANT If the sample to be analyzed presents particular characteristics (high presence of inorganic material) we suggest to insert the quartz crucible into the reactor of pyrolysis. In this case it is necessary to reduce from 30 mm to 20 mm the Quartz Wool in the lower section of the reactor.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 21
7
N Determination
Table 7. Consumables and Spare Parts for N Determination
Refer To: Description Qty Part Number
-- Bottom O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 206 40
-- Top O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 229 10
1 Quartz Wool 5g 338 222 00
2 Copper Oxide 50g 338 217 10
3 Silvered Cobaltous-Cobaltic Oxide 25g 338 245 00
4 High Quality Copper 50g 338 353 12
5 Soda Lime 100g 338 352 35
6 Molecular Sieve 3 Å 100g 338 018 01
7 Silica Gel plus indicator 100g 338 400 35
-- Chromosorb® WAW 25g 338 375 30
R1/R2 Empty Quartz Reactor Tube 18 mm OD (Set of 2) 1 468 200 70
-- Quartz Crucible 1 252 045 10
F1/F2 Empty Adsorption Filter Tube (Large Size) without Fast Connectors 2 281 130 64
CC Nitrogen Separation Column (PTFE; 0.5m; 8x6 mm) 1 260 078 20
-- Tin Containers 100 240 064 00
-- Forceps 1 205 005 00
-- Spatula 1 205 006 00
-- Nicotinamide STD 2g 338 400 19
-- Aspartic Acid STD 2g 338 400 22
-- Atropine STD 2g 338 244 00
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 22
7 N Determination
AS. Autosampler R1-R2. Reactors
F1-F2. Adsorption Filters CC. Chromatographic Column
TCD. Thermal Conductivity Detector
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 23
8
N Lubricant Determination
Table 8. Consumables and Spare Parts for N Lubricant Determination
Refer To: Description Qty Part Number
-- Bottom O-Ring for 25 mm HPAR (Set of 5) 1 290 206 49
-- Top O-Ring for 25 mm HPAR (Set of 5) 1 290 206 82
1 Quartz Wool 5g 338 222 00
2 Oxidation Catalyst 40g 338 400 00
3 High Quality Copper 50g 338 353 12
4 Soda Lime 100g 338 352 35
5 Silica Gel plus indicator 100g 338 400 35
6 Molecular Sieve 3 Å 100g 338 018 01
R1 Prepacked HPAR Reactor; 25 mm OD 1 468 020 08
CR HPAR Crucible 1 252 050 11
R1/R2 Empty HPAR Reactor; 25 mm OD 1 468 200 75
F1/F2 Empty Adsorption Filter Tube (Large Size) without Fast Connectors 2 281 130 64
CC Nitrogen Separation (N-Brew) Column (PTFE; 1 m; 8x6 mm) 1 260 700 04
-- Tin Containers 100 252 080 00
-- Tin Disk 30 mm diameter 100 252 080 15
-- Forceps 1 205 005 00
-- Spatula 1 205 006 20
-- Atropine 2g 338 244 00
-- Lubricant Reference Material 2g 338 352 40
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 24
8 N Lubricant Determination
AS. Autosampler R1-R2. Reactors
F1-F2. Adsorption Filters CC. Chromatographic Column
TCD. Thermal Conductivity Detector CR. HPAR Crucible
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 25
9
NC Determination
Table 9. Consumables and Spare Parts for NC Determination
Refer To: Description Qty Part Number
-- Bottom O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 206 40
-- Top O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 229 10
1 Quartz Wool 5g 338 222 00
2 Copper Oxide 50g 338 217 10
3 Silvered Cobaltous-Cobaltic Oxide 25g 338 245 00
4 High Quality Copper 50g 338 353 12
5 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
R1/R2 Empty Quartz Reactor Tube 18 mm OD (Set of 2) 1 468 200 70
-- Quartz Crucible 1 252 045 10
F Empty Adsorption Filter Tube (Small Size) without Fast Connectors 1 281 131 04
CC Multiseparation Column (SS; 2m; 6x5 mm) 1 260 079 20
-- Tin Containers 100 240 064 00
-- Forceps 1 205 005 00
-- Spatula 1 205 006 00
-- Nicotinamide STD 2g 338 400 19
-- Aspartic Acid STD 2g 338 400 22
Atropine STD 2g 338 244 00
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 26
9 NC Determination
AS. Autosampler R1-R2. Reactors
F. Adsorption Filter CC.Chromatographic Column
TCD. Thermal Conductivity Detector
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 27
10
NCS Determination
Table 10. Consumables and Spare Parts for NCS Determination
Refer To: Description Qty Part Number
-- Bottom O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 206 40
-- Top O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 229 10
1 Quartz Wool 5g 338 222 00
2 Copper Oxide 50g 338 217 10
3 Electrolytic Copper 70g 338 353 13
4 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
-- Vanadium Pentoxide 1g 338 375 10
R Empty Quartz Reactor Tube 18 mm OD (Set of 2) 1 468 200 70
-- Prepacked Quartz Reactor for CHNS/NCS/S Determinations 1 468 020 15
-- Quartz Crucible 1 252 045 10
F Empty Adsorption Filter Tube (Small Size) without Fast Connectors 1 281 131 04
CC CHNS/NCS Separation Column (PTFE 2 m; 6x5 mm) 1 260 082 15
-- Tin Containers 100 240 064 00
-- Forceps 1 205 005 00
-- Spatula 1 205 006 00
-- BBOT STD 2g 338 352 10
-- Sulphanilamide STD 2g 338 251 00
-- L-Cystine STD 2g 338 400 18
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 28
10 NCS Determination
AS. Autosampler R. Reactor
F. Adsorption Filter CC. Chromatographic Column
TCD. Thermal Conductivity Detector
IMPORTANT If the sample to be analyzed presents particular characteristics (high presence of inorganic material) we suggest to insert the quartz crucible into the oxidation/reduction reactor. In this case it is necessary to reduce the Quartz Wool between Copper Oxide and Electrolytic Copper up to obtain a thin layer and to reduce the Copper Oxide proportionally as shown in the figure above.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 29
11
NC-Soils, NC-Sediments, NC-Filters Determinations
Table 11. Consumables and Spare Parts for NC-Soils, NC-Sediments and NC-Filters Determination
Refer To: Description Qty Part Number
-- Bottom O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 206 40
-- Top O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 229 10
-- Bottom O-Ring for 25 mm OD HPAR (Set of 5) 1 290 206 49
-- Top O-Ring for 25 mm OD HPAR (Set of 5) 1 290 206 82
1 Quartz Wool 5g 338 222 00
2 Oxidation Catalyst 40g 338 400 00
3 High Quality Copper 50g 338 353 12
4 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
R1 Prepacked HPAR Reactor 1 468 020 08
-- Empty HPAR 25 mm OD 1 468 200 75
CR HPAR Crucible 1 252 050 11
R2 Empty Quartz Reactor 18 mm OD (Set of 2) 1 468 200 70
F Empty Adsorption Filter Tube (Small Size) without Fast Connectors 1 281 131 04
CC Multiseparation Column (SS; 2m; 6x5 mm) 1 260 079 20
-- Tin Containers 100 252 080 00
-- Tin Disk 30 mm diameter 100 252 080 15
-- Tin Disk 35 mm diameter 100 252 080 18
-- Forceps 1 205 005 00
-- Spatula 1 205 006 20
-- Aspartic Acid STD 2g 338 400 22
-- Soil NC Reference Material 5g 338 400 25
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 30
11 NC-Soils, NC-Sediments, NC-Filters Determinations
AS. Autosampler R1-R2. Reactors
F. Adsorption Filter CC. Chromatographic Column
TCD. Thermal Conductivity Detector CR. HPAR Crucible
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 31
12
N/Protein, N-Brew Determinations
Table 12. Consumables and Spare Parts for N/Protein, N-Brew Determinations
Refer To: Description Qty Part Number
-- Bottom O-Ring for 25 mm HPAR (Set of 5) 1 290 206 49
-- Top O-Ring for 25 mm HPAR (Set of 5) 1 290 206 82
1 Quartz Wool 5g 338 222 00
2 Oxidation Catalyst 40g 338 400 00
3 High Quality Copper 50g 338 353 12
4 Soda Lime 100g 338 352 35
5 Silica Gel plus indicator 100g 338 400 35
6 Molecular Sieve 3 Å 100g 338 018 01
-- Chromosorb® WAW 25g 338 375 30
R1 Prepacked HPAR Reactor; 25 mm OD 1 468 020 08
CR HPAR Crucible 1 252 050 11
R1/R2 Empty HPAR Reactor; 25 mm OD 1 468 200 75
F1/F2 Empty Adsorption Filter Tube (Large Size) without Fast Connectors 2 281 130 64
CC Nitrogen Separation Column (PTFE; 0.5 m; 8x6 mm) 1 260 078 20
CC Nitrogen Separation (N-Brew) Column (PTFE; 1 m; 8x6 mm) 1 260 700 04
-- Tin Containers 100 252 080 00
-- Tin Disk 30 mm diameter 100 252 080 15
-- Tin Disk 35 mm diameter 100 252 080 18
-- Forceps 1 205 005 00
-- Spatula 1 205 006 20
-- Urea STD 10g 338 400 02
-- Aspartic Acid STD 10g 338 400 23
-- Pasta Reference Material 10g 338 400 24
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 32
12 N/Protein, N-Brew Determinations
AS. Autosampler R1-R2. Reactors
F1-F2. Adsorption Filters CC. Chromatographic Column
TCD. Thermal Conductivity Detector CR. HPAR Crucible
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 33
13
FLASH IRMS (NC Determination)
Table 13. Consumables and Spare Parts for FLASH IRMS - NC Determinations
Refer To: Description Qty Part Number
-- Top O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 229 10
1 Quartz Wool 5g 338 222 00
2 Chromium Oxide 25g 338 229 00
3 Silvered Cobaltous- Cobaltic Oxide 25g 338 245 00
4 Reduced Copper 100g 338 353 00
5 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
R1/R2 Empty Quartz Reactor 18 mm OD (Set of 2) 1 468 200 70
Prepacked Oxydation Reactor NC Determination (FLASH IRMS) 1 468 020 76
Prepacked Reduction Reactor NC Determination (FLASH IRMS) 1 468 020 77
F Adsorption Filter for IRMS/HT Version 1 281 131 02
CC IRMS Separation Column (SS; 3m; 6x5 mm) 1 260 082 05
-- Tin Containers (Set of 100) 1 240 064 00
-- Forceps 1 205 005 00
-- Spatula 1 205 006 00
-- Cyclohexanone STD 1g 338 224 00
-- Atropine STD 2g 338 244 00
-- Nicotinamide STD 2g 338 400 19
-- Acetanilide STD 2g 338 367 00
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 34
13 FLASH IRMS (NC Determination)
AS. Autosampler R1 - R2. Reactors
F1 - F2. Adsorption Filters CC1 - CC2. Chromatographic Columns
TCD. Thermal Conductivity Detector CFI. Continuous Flow Interface
IRMS. Isotopic Ratio Mass Spectrometer
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 35
14
FLASH HT (O/H and NC Determinations)
O/H Determination
NC Determination
IMPORTANT The HT Pyrolysis chemicals for O/H determination constituted to ceramic reactor, glassy carbon reactor, graphite tube, graphite crucible, glassy carbon granulate, silver wool, etc., can be ordered directly to Thermo Fisher Scientific GmbH Bremen, Germany.
Table 14. HT Furnace
Refer To: Description Qty Part Number
-- O/H Separation column (SS; 1 m; 6x5 mm) 1 260 079 00
Table 15. Consumables and Spare Parts for FLASH HT - O/H and NC Determinations
Refer To: Description Qty Part Number
-- Top O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 229 10
1 Quartz Wool 5g 338 222 00
2 Chromium Oxide 25g 338 229 00
3 Silvered Cobaltous- Cobaltic Oxide 25g 338 245 00
4 Reduced Copper 100g 338 353 00
-- Carbosorb (CO2 Adsorber) per O/H Determinations 50 g 338 352 36
5 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
-- Prepacked Reactor NC/CHN Determinations - Argon sealed 1 468 020 09
-- Empty Quartz Reactor 18 mm OD (Set of 2) 1 468 200 70
-- Adsorption Filter for IRMS/HT Version 1 281 131 02
-- IRMS Separation Column (SS; 3m; 6x5 mm) 1 260 082 05
-- Tin Containers (Set of 100) 1 240 064 00
-- Forceps 1 205 005 00
-- Spatula 1 205 006 00
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 36
14 FLASH HT (O/H and NC Determinations)
Refer To: Description Qty Part Number
-- Cyclohexanone STD 1g 338 224 00
-- Atropine STD 2g 338 244 00
-- Nicotinamide STD 2g 338 400 19
-- Acetanilide STD 2g 338 367 00
Table 15. Consumables and Spare Parts for FLASH HT - O/H and NC Determinations (Continued)
AS. Autosampler R2. Reactors
F2. Adsorption Filter CC2. Chromatographic Column
TCD. Thermal Conductivity Detector CFI Continuous Flow Interface
IRMS. Isotopic Ratio Mass Spectrometer
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 37
15
Kits of Consumables and Spare Parts
Kit for 1000 Analyses for FLASH 2000
Table 16. Consumables for CHN Determination
No Description Qty Part Number
CHN Determination 1 190 024 10
1 Tin Containers (Set of 100) 20 240 064 00
2 Quartz Wool (5g) 1 338 222 00
3 Chromium Oxide (25g) 1 338 229 00
4 Silvered Cobaltous-Cobaltic Oxide (25g) 1 338 245 00
5 High Quality Copper (50g) 4 338 353 12
6 Empty Quartz Reactor Tube (Set of 2) 1 468 200 70
Table 17. Consumables for CHNS/NCS/S Determination (1)
No Description Qty Part Number
CHNS / NCS / S Determination with Empty Quartz Reactor 1 190 024 11
1 Tin Containers (Set of 100) 20 240 064 00
2 Copper Oxide (50g) 2 338 217 10
3 Magnesium Perchlorate [Anhydrone] (100g) Only for NCS and S determinations 1 338 219 00
4 Quartz Wool (5g) 1 338 222 00
5 Electrolytic Copper 4 338 353 13
6 Vanadium Pentoxide (1g) 1 338 375 10
7 Empty Quartz Reactor Tube (Set of 2) 2 468 200 70
Table 18. Consumables for CHNS/NCS/S Determination (2)
No Description Qty Part Number
CHNS / NCS / S Determination with Prepacked Quartz Reactor 1 190 024 12
1 Tin Containers (Set of 100) 20 240 064 00
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 38
15 Kits of Consumables and Spare Parts
2 Magnesium Perchlorate [Anhydrone] (100g) Only for NCS and S determinations 1 338 219 00
3 Quartz Wool (5g) 1 338 222 00
4 Vanadium Pentoxide (1g) 1 338 375 10
5 Prepacked Reactor for CHNS, NCS and S determinations 4 468 020 15
Table 18. Consumables for CHNS/NCS/S Determination (2) (Continued)
Table 19. Consumables for Oxygen Determination
No Description Qty Part Number
Oxygen Determination 1 190 024 16
1 Silver Containers (Set of 100) 10 240 054 00
2 Magnesium Perchlorate [Anhydrone] (100g) 1 338 219 00
3 Quartz Wool (5g) 2 338 222 00
4 Quartz Turnings (50g) 1 338 223 00
5 Nickel Plated Carbon (5g) 8 338 238 00
6 Nickel Wool (2g) 1 338 250 00
7 Soda Lime (100g) 1 338 352 35
8 Empty Quartz Reactor (Set of 2) 1 468 200 70
Table 20. Consumables for N OrganicDetermination (1)
No Description Qty Part Number
N Organic Determination 1 190 024 13
1 Tin Containers (Set of 100) 20 240 064 00
2 Molecular Sieve 3Å (100g) 1 338 018 01
3 Copper Oxide (50g) 2 338 217 10
4 Quartz Wool (5g) 1 338 222 00
5 Silvered Cobaltous-Cobaltic Oxide (25g) 2 338 245 00
6 Soda Lime (200g) 2 338 352 30
7 High Quality Copper (50g) 8 338 353 12
8 Chromosorb® WAW (25g) 1 338 375 30
9 Silica Gel plus indicator (100g) 1 338 400 35
10 Empty Quartz Reactor Tube (Set of 2) 2 468 200 70
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 39
15 Kits of Consumables and Spare Parts
Table 21. Consumables for N Lubricant Determination
No Description Qty Part Number
N Lubricant Determination 1 190 024 30
1 Tin Containers (Set of 100) 20 240 064 00
2 Top O-Ring for HPAR Reactor (Set of 5) 1 290 206 82
3 Molecular Sieve 3Å (100g) 1 338 018 01
4 Quartz Wool (5g) 2 338 222 00
5 Atropine STD (2g) 1 338 244 00
6 Soda Lime (200g) 5 338 352 30
7 Lubricant Reference Material; N% = 0.58 (2g) 1 338 352 40
8 High Quality Copper (50g) 12 338 353 12
9 Oxidation Catalyst (40g) 2 338 400 00
10 Silica Gel with Indicator (100g) 1 338 400 35
Table 22. Consumables for NC Determination
No Description Qty Part Number
NC Determination 1 190 024 14
1 Tin Containers (Set of 100) 20 240 064 00
2 Copper Oxide (50g) 2 338 217 10
3 Magnesium Perchlorate [Anhydrone] (100g) 1 338 219 00
4 Quartz Wool (5g) 1 338 222 00
5 Silvered Cobaltous-Cobaltic Oxide (25g) 2 338 245 00
6 High Quality Copper (50g) 8 338 353 12
7 Empty Quartz Reactor Tube (Set of 2) 2 468 200 70
Table 23. Consumables for NC-Soils, NC-Sediments, NC-Filters Determination
No Description Qty PN
NC-Soils, NC-Sediments, NC-Filters Determination 1 190 024 15
1 Tin Disk 30 mm OD (Set of 100) 20 252 080 15
2 Magnesium Perchlorate [Anhydrone] (100g) 1 338 219 00
3 Quartz Wool (5g) 1 338 222 00
4 High Quality Copper (50g) 4 338 353 12
5 Prepacked HPAR Reactor 1 468 020 08
6 Empty Quartz Reactor Tube (Set of 2) 1 468 200 70
40 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
15 Kits of Consumables and Spare Parts
Kit for N/Protein Analyses
Table 24. Package A for Solid Samples
No Description Qty Part Number
Package A of Consumables for Solid Samples 1 190 042 20
1 HPAR Crucible 1 252 050 11
2 Tin Disk 30 mm diameter (Set of 100) 20 252 080 15
3 Bottom O-Ring for HPAR Reactor (Set of 5) 1 290 206 49
4 Top O-Ring for HPAR Reactor (Set of 5) 1 290 206 82
5 Molecular Sieve 3Å (100g) 1 338 018 01
6 Quartz Wool (5g) 2 338 222 00
7 Soda Lime (200g) 5 338 352 30
8 High Quality Copper (50g) 12 338 353 12
9 Oxidation Catalyst (40g) 2 338 400 00
10 Aspartic Acid STD (10g) 1 338 400 23
11 Pasta Reference Material (10g) 1 338 400 24
12 Silica Gel plus indicator (100g) 1 338 400 35
Table 25. Package B for Solid Samples
No Description Qty Part Number
Package B of Consumables for Solid Samples 1 190 042 25
1 HPAR Crucible 2 252 050 11
2 Tin Disk 30 mm diameter (Set of 100) 100 252 080 15
3 Bottom O-Ring for HPAR Reactor (Set of 5) 1 290 206 49
4 Top O-Ring for HPAR Reactor (Set of 5) 1 290 206 82
5 Molecular Sieve 3Å (100g) 6 338 018 01
6 Quartz Wool (5g) 8 338 222 00
7 Soda Lime (200g) 25 338 352 30
8 High Quality Copper (50g) 60 338 353 12
9 Oxidation Catalyst (40g) 6 338 400 00
10 Aspartic Acid STD (10g) 2 338 400 23
11 Pasta Reference Material (10g) 2 338 400 24
12 Silica Gel (100g) 4 338 400 35
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 41
15 Kits of Consumables and Spare Parts
Kit for 1000 Analyses for FLASH for IRMS and FLASH HT (NC Determination)
Table 26. Package A for Liquid Samples (AI/AS 3000 II)
No Description Qty Part Number
Package A of Consumables for Liquid Samples (with AI/AS 3000 II autosampler) 1 190 042 29
1 Complete Vials 2 SVW Package (Set of 100) 10 240 140 19
2 Vial Solvent 4 mL ST 4-SVQ (Set of 5) 1 240 140 32
3 Bottom O-Ring for HPAR Reactor (Set of 5) 1 290 206 49
4 Top O-Ring for HPAR Reactor (Set of 5) 1 290 206 82
5 Septa for Waste Bottle (Set of 5) 1 313 032 18
6 Septa for FLASH 2000 Injector (Set of 50) 1 313 032 30
7 Molecular Sieve (100g) 1 338 018 01
8 Quartz Wool (5g) 1 338 222 00
9 Soda Lime (200g) 3 338 352 30
10 High Quality Copper (50g) 8 338 353 12
11 Oxidation Catalyst (40g) 2 338 400 00
12 Silica Gel plus indicator (100g) 2 338 400 35
13 Screw Caps 8-SC (Set of 5) 10 386 060 85
Table 27. Kit for 1000 Analyses for FLASH for IRMS and FLASH HT (NC Determination)
No Description Qty Part Number
NC Determinations FLASH IRMS 1 190 024 18
1 Tin container (Set of 100) 10 240 064 00
2 Sealing O-Ring for adsorption filter (PN 281 131 00) 2 290 136 03
3 Top O-ring for 18 mm OD quartz reactor (Set of 5) 2 290 229 10
4 Magnesium Perchlorate [Anhydrone] (100g) 1 338 219 00
5 Quartz wool (5g) 1 338 222 00
6 Cyclohexanone STD (1g) 1 338 224 00
7 Chromium Oxide (25g) 4 338 229 00
8 Silvered Cobaltous Cobaltic Oxide (25g) 4 338 245 00
9 Reduced Copper (100g) n.4 4 338 353 00
10 Empty Quartz Reactor 18 mm OD (Set of 2) n.2 2 468 200 70
42 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
15 Kits of Consumables and Spare Parts
Kit for 1000 Analyses for FLASH for IRMS (NC Determination)
Kit for 1000 Analyses for FLASH HT/HT Plus (NC Determination)
Table 28. Kit for 1000 Analyses for FLASH for IRMS (NC Determination)
No Description Qty Part Number
NC Determinations FLASH IRMS 1 190 037 70
1 Tin container (Set of 100) 10 240 064 00
2 Top O-ring for 18 mm OD quartz reactor (Set of 5) 1 290 229 10
3 Magnesium Perchlorate [Anhydrone] (100 g) 1 338 219 00
4 Quartz wool (5g) 1 338 222 00
5 Chromium Oxide (25g) 2 338 229 00
6 Silvered Cobaltous Cobaltic Oxide (25g) 1 338 245 00
7 Reduced Copper (100g) 3 338 353 00
8 Empty Quartz Reactor 18 mm OD (Set of 2) n.2 2 468 200 70
Table 29. Kit for 1000 Analyses for FLASH HT/HT Plus (NC Determination)
No Description Qty Part Number
NC Determinations FLASH HT/HT Plus 1 190 037 80
1 Tin container (Set of 100) 10 240 064 00
2 Top O-ring for 18 mm OD quartz reactor (Set of 5) 1 290 229 10
3 Magnesium Perchlorate [Anhydrone] (100 g) 1 338 219 00
4 Quartz wool (5g) 1 338 222 00
5 Chromium Oxide (25g) 3 338 229 00
6 Silvered Cobaltous Cobaltic Oxide (25g) 3 338 245 00
7 Reduced Copper (100g) 3 338 353 00
8 Empty Quartz Reactor 18 mm OD (Set of 2) n.3 3 468 200 70
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 43
15 Kits of Consumables and Spare Parts
Kit for 3000 Analyses for FLASH for IRMS and FLASH HT (NC Determination)
Kit for 3000 Analyses for FLASH HT/HT Plus (NC Determination)
Table 30. Kit for 3000 Analyses for FLASH IRMS and FLASH HT (NC Determination)
No Description Qty Part Number
NC Determinations FLASH IRMS/HT 1 190 037 60
1 Tin container 0.02 mL (Set of 100) 5 240 053 00
2 Tin container (Set of 100) 25 240 064 00
3 Adsorption Filter for IRMS/HT Version 1 281 131 02
4 Silicon Sleeve 4 290 036 35
5 Aluminium Ferrule (Set of 10) 1 290 240 45
6 Top O-ring for 18 mm OD quartz reactor (Set of 5) 4 290 229 10
7 Magnesium Perchlorate [Anhydrone] (100 g) 2 338 219 00
8 Quartz wool (5g) 3 338 222 00
9 Chromium Oxide (25g) 4 338 229 00
10 Silvered Cobaltous Cobaltic Oxide (25g) 4 338 245 00
11 Reduced Copper (100g) 8 338 353 00
12 SS Tubing Nut; 2mm (Set of 10) 1 350 404 03
13 Empty Quartz Reactor 18 mm OD (Set of 2) n.5 5 468 200 70
Table 31. Kit for 3000 Analyses for FLASH HT/HT Plus (NC Determination)
No Description Qty Part Number
NC Determinations FLASH HT/HT Plus 1 190 037 90
1 Tin container 0.02 mL (Set of 100) 5 240 053 00
2 Tin container (Set of 100) 25 240 064 00
3 Adsorption Filter for IRMS/HT Version 1 281 131 02
4 Silicon Sleeve 4 290 036 35
5 Aluminium Ferrule (Set of 10) 1 290 240 45
6 Top O-ring for 18 mm OD quartz reactor (Set of 5) 4 290 229 10
7 Magnesium Perchlorate [Anhydrone] (100 g) 2 338 219 00
8 Quartz wool (5g) 3 338 222 00
44 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
15 Kits of Consumables and Spare Parts
Kit for 1000 Analyses for FLASH for IRMS and FLASH HT (NCS Determination)
9 Chromium Oxide (25g) 7 338 229 00
10 Silvered Cobaltous Cobaltic Oxide (25g) 7 338 245 00
11 Reduced Copper (100g) 8 338 353 00
12 SS Tubing Nut; 2mm (Set of 10) 1 350 404 03
13 Empty Quartz Reactor 18 mm OD (Set of 2) n.8 8 468 200 70
Table 31. Kit for 3000 Analyses for FLASH HT/HT Plus (NC Determination) (Continued)
Table 32. Kit for 1000 Analyses for FLASH IRMS and FLASH HT/FLASH HT Plus (NCS Determination)
No Description Qty Part Number
NCS Determinations FLASH IRMS/HT 1 190 037 50
1 Tin container (Set of 100) 10 240 064 00
2 Magnesium Perchlorate [Ahnydrone] (100g) 1 338 219 00
3 Quartz wool (5g) 1 338 222 00
4 Vanadium Pentoxide (1g) 3 338 375 10
5 Prepacked Quartz Reactor for NCS Determination for FLASH IRMS/HT 5 468 020 21
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 45
16
Reactors, Absorption Filters, GC Columns and Fittings
Reactors
Table 33. Reactor Tubes
No Description Qty Part Number
1 Empty Quartz Reactor 18 mm OD (Set of 2) 1 468 200 70
2 Top O-Ring for 18 mm OD Quartz Reactor (Set of 5) 1 290 229 10
3 Bottom O-Ring 18 mm OD Quartz Reactor (Set of 5) 1 290 206 40
4 Empty Quartz Reactor 18 mm OD CYL (Set of 2) [for IRMS/HT] 1 468 200 60
5 Opaque Quartz Reactor 18 mm OD (Set of 2) 1 468 200 00
6 Empty HPAR Reactor 25 mm OD 1 468 200 75
7 Top O-Ring for HPAR (Set of 5) 1 290 206 82
8 Bottom O-Ring for HPAR (Set of 5) 1 290 206 49
9 Prepacked Quartz Reactor for CHNS/NCS/S Determinations 1 468 020 15
10 Prepacked HPAR Reactor for N/Protein/NC-Soils Determinations 1 468 020 08
11 Prepacked Reactor NC/CHN Determinations - Argon sealed 1 468 020 09
12 Prepacked Quartz Reactor for NCS Determinations - Argon sealed [for HT/HT Plus]
1 468 020 21
13 HPAR Crucible 1 252 050 11
14 Quartz Crucible (13 mm OD) 1 252 045 10
15 HPAR Reactor Extractor (see A) 1 205 006 26
16 Crucible Extractor (see B) 1 205 006 27
16 Cleaning Device for HPAR Reactor (see C) 1 205 006 25
18 Cleaning Device for Quartz Reactor and SS Crucible (see D) 1 276 060 10
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 46
16 Reactors, Absorption Filters, GC Columns and Fittings
Adsorption Filters
Figure 1. Fast connection couples
Figure 2. Fast connection couples plus fast connectors adapters
A B
C D
Table 34. Adsorption Filters
No Description Qty Part Number
1 Adsorption Filter FC (Small Size) without Fast Connectors 1 281 131 04
2 Adsorption Filter FC (Large Size) without Fast Connectors 1 281 130 64
3 Fast Connectors Couple (Male plus Female) - See Figure 1 190 502 08
4 Fast Connector Couples plus Fast Connectors Adapters - See Figure consisting of:
- Fast Connectors (male + female), Set of 2
- Fast Connector Adapters, Set of 2
See Figure 1 and Figure 2.
1 190 502 09
5 Sealing O-Ring for Adsorption Filter FC [PN 281 131 04] (Set of 2) 1 290 036 35
6 Sealing O-Ring for Adsorption Filter FC [PN 281 130 64] (Set of 2) 1 290 100 82
1. Male fast connector 2. Female fast connector
1. Male fast connector 2. Female fast connector 3. Fast connector adapter
1 2
1 2 3
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 47
16 Reactors, Absorption Filters, GC Columns and Fittings
Table 35. Adsorption Filters (Old Types)*
No Description Qty Part Number
1 Adsorption Filter (Small Size) 1 281 131 00
2 Sealing O-Ring for Adsorption Filter [PN 281 131 00] (Set of 2) 1 290 136 03
3 Adsorption Filter (Large Size) 1 281 130 60
4 Sealing O-Ring for Adsorption Filter [PN 281 130 60] (Set of 2) 1 290 100 82
Note * The Absorption Filters (Old Types) have been mounted on FLASH EA™ 1112 Elemental Analyzer till Serial Number 20005214
Table 36. Adsorption Traps (Pyrex Type)**
No Description Qty Part Number
1 Large Adsorption Trap (Pyrex Type) without Fast Connectors 1 281 131 06
2 Sealing O-Ring for Pyrex Type Large Adsorption Filter (Set of 2) 1 290 036 35
Note ** It substitutes the Absorption Filter (Large Size) with Fast Connectors PN 281 130 65 in N/Protein and NC-Soil Configurations when the sample contains very high humidity percentage and when several daily analyses are required.
Table 37. Adsorption Traps for IRMS and HT Versions
No Description Qty Part Number
1 Adsorption Filter for IRMS/HT Version (small size) 1 281 131 02
2 Sealing O-Ring for Adsorption Filter (Set of 2) 1 290 136 35
48 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
16 Reactors, Absorption Filters, GC Columns and Fittings
Gas Chromatographic Columns
Table 38. Gas Chromatographic Columns
No Description Qty Part Number
1 Multiseparation Column (PTFE; 2m; 6x5 mm) 1 260 082 20
2 Multiseparation Column (SS; 2 m; 6x5 mm) 1 260 079 20
3 CHNS/NCS Separation Column (PTFE; 2 m; 6x5 mm) 1 260 082 15
4 Oxygen Separation Column (PTFE; 1 m; 6x5 mm) 1 260 079 00
5 Sulphur Separation Column (PTFE; 0.8 m; 6x4 mm) 1 260 078 00
6 Sulphur Separation Column for OEA / FPD (PTFE; 0.15 m; 6x4 mm) 1 260 078 01
7 Sulphur Separation Column for IRMS / HT (PTFE; 0.8 m; 6x4 mm) 1 260 070 80
8 Nitrogen Separation Column (PTFE; 0.5 m; 8x6 mm) 1 260 078 20
9 Nitrogen Separation (N-Brew) Column (PTFE; 1 m; 8x6 mm) 1 260 700 04
10 IRMS Separation Column (SS; 3 m; 6x5 mm) 1 260 082 05
Characteristics Analytical Determination
Mat
eria
l
Leng
hth
(cm
)
OD
(mm
)
ID (m
m)
CH
NS
CH
N
NC
S
S (T
CD
)
S (F
PD)
Oxy
gen
N N/P
rote
in
N-B
rew
/ N-L
ubric
ant
NC
NC
-Soi
ls
NC
-Sed
imen
ts
NC
-Filt
ers
IRM
S (N
C)
HT
(NC
)
HT
(O/H
)
Colu
mns
Steel 100 6 5
200 6 5
300 6 5
PTFE 15 6 4
50 8 6
80 6 4
100 8 6
200 6 5
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 49
16 Reactors, Absorption Filters, GC Columns and Fittings
Fittings
Table 39. Fittings & Tubes
No Description Qty Part Number
1 O-ring for 6 mm OD tube (Set of10) 1 290 305 67
2 Aluminium Ferrule, 2 mm (Set of 10) 1 290 340 45
3 Aluminium Ferrule, 4 mm (Set of 10) 290 340 51
4 Knurled nut for Polyethylene Tube PN 420 100 00 1 350 021 24
5 Push Fit Connector Tube 5 350 341 08
6 SS Tubing Nut; 2mm (Set of 10) 1 350 404 03
7 Male hose adapter for Polyethylene Tube PN 420 100 00 (Set of 10) 1 350 441 37
8 6 MB Brass Blanking Nut (Set of 10) 1 350 451 00
9 SS Tube; 2x1 mm 3 m 391 025 00
10 Polyethylene Tube, Blue Color; 5x3 mm 5 m 420 100 00
11 PTFE Tube; 2x1 mm 1 m 420 015 00
12 PTFE Tube; 2x1mm 5 m 420 015 01
13 PTFE Tube; 4x2 mm 1 m 420 016 00
14 PTFE Tube; 6x4 mm 1 m 420 017 00
50 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
16 Reactors, Absorption Filters, GC Columns and Fittings
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 51
17
Reagents and Chemicals
CHN Determination
CHN-O Determination
Table 40. Reagents and Chemicals for CHN Determination
No Description Qty Part Number
1 Quartz Wool 5g 338 222 00
2 Chromium Oxide 25g 338 229 00
3 Silvered Cobaltous-Cobaltic Oxide 25g 338 245 00
4 High Quality Copper 50g 338 353 12
Table 41. Reagents and Chemicals for CHN-O Determination
No Description Qty Part Number
1 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
2 Quartz Wool 5g 338 222 00
3 Quartz Turnings 50g 338 223 00
4 Chromium Oxide 25g 338 229 00
5 Nickel Plated Carbon 5g 338 238 00
6 Silvered Cobaltous-Cobaltic Oxide 25g 338 245 00
7 Nickel Wool 2g 338 250 00
8 Soda Lime 100g 338 352 35
9 High Quality Copper 50g 338 353 12
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 52
17 Reagents and Chemicals
CHNS Determination
CHNS-O Determination
S Determination
Table 42. Reagents and Chemicals for CHNS Determination
No Description Qty Part Number
1 Copper Oxide 50g 338 217 10
2 Quartz Wool 5g 338 222 00
3 Electrolytic Copper 70g 338 353 13
4 Vanadium Pentoxide 1g 338 375 10
Table 43. Reagents and Chemicals for CHNS-O Determination
No Description Qty Part Number
1 Copper Oxide 50g 338 217 10
2 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
3 Quartz Wool 5g 338 222 00
4 Quartz Turnings 50g 338 223 00
5 Nickel Plated Carbon 5g 338 238 00
6 Nickel Wool 2g 338 250 00
7 Soda Lime 100g 338 352 35
8 Electrolytic Copper 70g 338 353 13
9 Vanadium Pentoxide 1g 338 375 10
Table 44. Reagents and Chemicals for S Determination
No Description Qty Part Number
1 Copper Oxide 50g 338 217 10
2 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
3 Quartz Wool 5g 338 222 00
4 Electrolytic Copper 70g 338 353 13
5 Vanadium Pentoxide 1g 338 375 10
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 53
17 Reagents and Chemicals
O Determination
N Determination
N Lubricant Determination
Table 45. Reagents and Chemicals for O Determination
No Description Qty Part Number
1 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
2 Quartz Wool 5g 338 222 00
3 Quartz Turnings 50g 338 223 00
4 Nickel Plated Carbon 5g 338 238 00
5 Nickel Wool 2g 338 250 00
6 Soda Lime 100g 338 352 35
Table 46. Reagents and Chemicals for N Determination
No Description Qty Part Number
1 Molecular Sieve 3 Å 100g 338 018 01
2 Copper Oxide 50g 338 217 10
3 Quartz Wool 5g 338 222 00
4 Silvered Cobaltous-Cobaltic Oxide 25g 338 245 00
5 Soda Lime 200g 338 352 30
6 High Quality Copper 50g 338 353 12
7 Chromosorb® WAW 25g 338 375 30
8 Silica Gel plus indicator 100g 338 400 35
Table 47. Reagents and Chemicals for N Lubricant Determination
No Description Qty Part Number
1 Molecular Sieve 3 Å 100g 338 018 01
2 Quartz Wool 5g 338 222 00
3 Soda Lime 200g 338 352 30
4 High Quality Copper 50g 338 353 12
6 Oxidation Catalyst 40g 338 400 00
54 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
17 Reagents and Chemicals
NC Determination
NCS Determination
NC-Soils, NC-Sediments, NC-Filters Determination
Table 48. Reagents and Chemicals for NC Determination
No Description Qty Part Number
1 Copper Oxide 50g 338 217 10
2 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
3 Quartz Wool 5g 338 222 00
4 Silvered Cobaltous-Cobaltic Oxide 25g 338 245 00
5 High Quality Copper 50g 338 353 12
Table 49. Reagents and Chemicals for NCS Determination
No Description Qty Part Number
1 Copper Oxide 50g 338 217 10
2 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
3 Quartz Wool 5g 338 222 00
4 Electrolytic Copper 70g 338 353 13
5 Vanadium Pentoxide 1g 338 375 10
Table 50. Reagents and Chemicals for NC-Soils, NC-Sediments, NC-Filters Determination
No Description Qty Part Number
1 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
2 Quartz Wool 5g 338 222 00
3 High Quality Copper 50g 338 353 12
4 Oxidation Catalyst 40g 338 400 00
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 55
17 Reagents and Chemicals
N/Protein, N-Brew Determination
IRMS and HT NC Determination
Table 51. Reagents and Chemicals for N/Protein, N-Brew Determination
No Description Qty Part Number
1 Molecular Sieve 3 Å 100g 338 018 01
2 Quartz Wool 5g 338 222 00
3 Soda Lime 200g 338 352 30
4 High Quality Copper 50g 338 353 12
5 Chromosorb ® WAW 25g 338 375 30
6 Oxidation Catalyst 40g 338 400 00
7 Silica Gel plus indicator 100g 338 400 35
Table 52. Consumables and Spare Parts for FLASH 2000 IRMS and HT NC Determinations
No Description Qty Part Number
1 Magnesium Perchlorate (Anhydrone) 100g 338 219 00
2 Quartz Wool 5g 338 222 00
3 Chromium Oxide 25g 338 229 00
4 Silvered Cobaltous- Cobaltic Oxide 25g 338 245 00
5 Reduced Copper 100g 338 353 00
6 Carbosorb (CO2 Adsorber) for O/H Determinations 50g 338 352 36
56 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
17 Reagents and Chemicals
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 57
18
Analytical Standards and Reference Materials
Table 53. Analytical Standards
No Description Qty Part Number
1 Acetanilide 2g 338 367 00
2 Aspartic Acid 2g 338 400 22
3 Aspartic Acid 10g 338 400 23
4 Atropine 2g 338 244 00
5 BBOT* 2g 338 352 10
6 Benzoic Acid 2g 338 225 00
7 Cyclohexanone 2,4 DNPH ** 1g 338 224 00
8 dl-Methionine 25g 338 352 20
9 Imidazole 1g 338 354 30
10 L-Cystine 2g 338 400 18
11 Nicotinamide 2g 338 400 19
12 Sulphanilamide 2g 338 251 00
13 Urea 2g 338 400 01
14 Urea 10g 338 400 02
* 2,5 bis (5-ter-butyl-benzoxazol-2-yl) thiophene; ** Cyclohexanone 2,4-dinitrophenylhydrazone
Table 54. Reference Materials
No Description Qty Part Number
1 Lubricant Reference Material 2g 338 352 40
2 Pasta Reference Material 10g 338 400 24
3 Pasta Reference Material for S determination (OEA / FPD) 2g 338 400 27
4 Soil NC Reference Material 5g 338 400 25
5 Soil NCS Reference Material for NCS determination and S determination (OEA/FPD)
2g 338 400 26
6 OEA/FPD Reference Solutions Kit constituted by 4 flasks (2 mL each) containing 10, 50, 100 and 500 ppm for Sulphur
1 338 190 40
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 58
18 Analytical Standards and Reference Materials
Standard
Reference Material
OEA/FPD Reference Solution Kit
Standard N% C% H% S% O%
Acetanilide 10.36 71.09 6.71 --- 11.84
Aspartic Acid 10.52 36.09 5.30 --- 48.08
Atropine 4.84 70.56 8.01 --- 16.59
BBOT 6.51 72.53 6.09 7.44 7.43
Benzoic Acid --- 68.85 4.95 --- 26.20
Cyclohexanone 2-4 DNPH 20.14 51.79 5.07 --- 23.00
dl-Methionine 9.39 40.25 7.43 21.49 21.45
Imidazole 41.15 52.93 5.92 --- ---
L-Cystine 11.66 29.99 5.03 26.69 26.63
Nicotinamide 22.94 59.01 4.95 --- 13.10
Sulphanilamide 16.27 41.84 4.68 18.62 18.58
Urea 46.65 20.00 6.71 --- 26.64
Reference Material N% C% H% S%
Lubricant (batch n° O12A) 0.58 76.44 12.00 2.40
Pasta (batch n° H13A) 1.89 --- --- ---
Pasta for OEA/FPD (batch n° N12A) --- --- --- 0.134
Soil NC (batch n° N12A) 0.20 2.01 --- ---
Soil NCS (batch n° N12A) 0.20 2.01 --- 0.032
OEA/FPD Reference Solutions Kit
10 ppm of Sulphur (2 mL flask)
50 ppm of Sulphur (2 mL flask)
100 ppm of Sulphur (2 mL flask)
500 ppm of Sulphur (2 mL flask)
IMPORTANT All the standards and the references material are accompanied with a quality certificate including the storage condition and the lifetime of the products.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 59
19
Adsorber for Fluorine Compounds
Table 55.
No Description Qty Part Number
1 FluoAdso
Specific adsorber for Fluorine compounds CHN, NC and N Determinations
15g 338 400 30
100 mm
50 mm
30 mm
20 mm
30 mm10 mm
Reactor: Quartz TubeTemperature: 950 �C
TCD
Temperature: 75 �C
Quartz WoolAdsorber
Chromium Oxide
Copper
Silvered Cobaltous-Cobaltic Oxide
Quartz Wool
Flash 2000-CHN Configuration for�Fluorine-containing Compounds
For more details on CHN determination on Fluorine-containing Compounds require the OEA Application Note n. 11008.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 60
19 Adsorber for Fluorine Compounds
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 61
20
FLASH 2000 Upgrade Kits
Kit for Total Organic Carbon (TOC) in Solid Sample PN 190 041 28Total Organic Carbon is a very important parameter for soil or for other organic matrix.
The kit for TOC allows to eliminate all inorganic carbon as Carbon Dioxide by effect of the acidification and heating of the sample in special containers.
Table 56 lists the materials included into the kit.
Figure 3. Sample Holder Plate and Electric Heater
Table 56. Kit for Total Organic Carbon in Solid Sample
Part Number Description Quantity
240 054 05 Silver sample container for solid (Set of 100) 1
334 130 36 Sample holder plate (see Figure 3) 1
354 600 17 Electric heater (see Figure 3) 1
365 005 30 Syringe 1750 LT 500 μL 1
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 62
20 FLASH 2000 Upgrade Kits
Conversion Kit from NC to NCS Determination PN 190 042 45Table 57 lists the materials included into the kit.
Conversion Kit from NC to S Determination PN 190 042 40Table 58 lists the materials included into the kit.
Table 57. Conversion Kit from NC to NCS Determination
No Description Qty Part Number
1 CHNS / NCS Separation Column (PTFE; 2 m; 6x5 mm) 1 260 082 15
2 BBOT* (N: 6.51%; C: 72.53%; S: 7.44%) 1 338 352 10
3 Vanadium Pentoxide (1g) 1 338 375 10
4 Soil NCS Reference Material (2g) [The percentage of the elements in this Ref. Mat. will vary batch-to-batch as indicated to analytical data sheet included] Soil NCS R.M. (Batch n. N12A) N%: 0.20; C%: 2.01; S%: 0.032
1 338 400 26
5 Bottom Adapter Connection SS, 1/8 Gas - 6MB (complete) 1 347 018 08
6 Prepacked Quartz Reactor for NCS Determination 1 468 020 15*2,5 bis (5-tert-butyl-benzoxazol-2-yl) thiophene
Table 58. Conversion Kit from NC to S Determination
No Description Qty Part Number
1 Sulphur Separation Column (PTFE; 0.8 m; 6x5 mm) 1 260 078 00
2 BBOT* (N: 6.51%; C: 72.53%; S: 7.44%) 1 338 352 10
3 Vanadium Pentoxide (1g) 1 338 375 10
4 Soil NCS Reference Material (2g) [The percentage of the elements in this Ref. Mat. will vary batch-to-batch as indicated to analytical data sheet included] Soil NCS R.M. (Batch n. N12A) N%: 0.20; C%: 2.01; S%: 0.032
1 338 400 26
5 Bottom Adapter Connection SS, 1/8 Gas - 6MB (complete) 1 347 018 08
6 Prepacked Quartz Reactor for NCS Determination 1 468 020 15*2,5 bis (5-tert-butyl-benzoxazol-2-yl) thiophene
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 63
20 FLASH 2000 Upgrade Kits
Conversion from CHN to CHNS ConfigurationTable 59 lists the materials included into the kit for upgrading a CHN analyzer to a CHNS.
Conversion from CHN/CHNS to Oxygen ConfigurationTable 60 lists the materials included into the kit for upgrading a CHN/CHNS analyzer to Oxygen.
Table 59. Conversion from CHN to CHNS Configuration
No Description Qty Part Number
1 CHNS / NCS Separation Column (PTFE; 2 m; 6x5 mm) 1 260 082 15
2 Prepacked Quartz Reactor for CHNS/NCS/S Determinations 1 468 020 15
3 BBOT* (N: 6.51%; C: 72.53%; S: 7.44%) 1 338 352 10
4 Vanadium Pentoxide (1g) 1 338 375 10*2,5 bis (5-tert-butyl-benzoxazol-2-yl) thiophene
Table 60. Conversion from CHN/CHNS to Oxygen Configuration
No Description Qty Part Number
1 Oxygen Separation Column (SS; 1 m; 6x5 mm) 1 260 079 00
2 Empty Adsorption Filter (small size) 1 281 131 04
3 Magnesium Perchlorate [Anhydrone] (100g) 1 338 219 00
4 Quartz Wool (5g) 1 338 222 00
5 Quartz Turnings (50g) 1 338 223 00
6 Nickel Plated Carbon (5g) 1 338 238 00
7 Soda Lime (100g) 1 338 352 35
8 Empty Quartz Reactor (Set of 2) 1 468 200 70
9 Silver Containers (set of 100) 1 240 054 00
64 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
20 FLASH 2000 Upgrade Kits
Sulphur Conversion Kit for FLASH IRMS and FLASH HT PN 190 037 40Table 60 lists the materials included into the kit.
Table 61. Sulphur Conversion Kit for FLASH IRMS and FLASH HT
No Description Qty Part Number
1 Tin Container (Set of 100) 2 240 064 00
2 Sulphur Separation Column for IRMS / HT (PTFE; 0.8 m; 6x4 mm) 1 260 070 80
3 Capillary SS 1/16-in. x 0.8 mm 1 190 250 08
4 Brass Swagelok Tube Fitting 1 350 001 22
5 Adsorption Filter for IRMS/HT Version 1 281 131 02
6 Aluminium Ferrule 1/16-in. (Set of 10) 1 290 340 44
7 Aluminium Ferrule 2 mm (Set of 10) 1 290 340 45
8 Sulfanilamide STD 1 338 251 00
9 Vanadium Pentoxide (1g) 1 338 375 10
10 Straight Connector 2 347 141 00
11 SS Tubing Nut; 2mm (Set of 10) 1 350 404 03
12 Teflon Tube 5 m 1 420 015 01
13 Prepacked Quartz Reactor for NCS/S Determination 1 468 020 21
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 65
21
Sample Containers
Tin Containers
Figure 4. Tin and Silver Containers
Note You will find here an optimized guide for the best choice of containers tailored to your specific analytical needs, through a detailed specification both for tin and silver containers to be used according to the different applications. To avoid deformation problems and to guarantee a complete use of all the sample containers, these are conveniently supplied and protected in adequate plastic boxes in package of 50 and 100.
Table 62. Tin Containers (See Figure 4)
Refer To: Description Qty Part Number
A Universal “Soft” Tin Containers 100 240 064 00
B Small “Soft” for Solid Sample 100 240 053 00
C Tin Containers for N/Protein and N-Brew Analysis 100 252 080 00
D “Hard” Tin Containers 100 240 088 10
E “Hard” Tin Container 100 240 088 20
F “Hard” Tin Container 50 240 072 00
G “Hard” Tin Capillary 50 240 070 00
H Tin Disks 30 mm diameter 100 252 080 15
I Tin Disk 35 mm diameter 100 252 080 18
A B C L M D E F G N
1. “Soft” containers are obtained by pressing light metal foil. 2. “Hard” tin containers are heavier than the “Soft” ones and allow hermetic sealing. For this reason the “Hard” tin containers are obtained by moulding ultrapure tin sheets.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 66
21 Sample Containers
Silver Containers
Tin Container Type Use
A Recommended for solid samples (organics, soils, sediments, food, plastic, coal, etc.) or liquid samples adsorbed on inert solid material Chromosorb® WAW (PN 338 375 30). See Figure 4.
B Recommended for solid samples.
C Recommended for N/Protein and N-Brew Determinations.
D Recommended for the analysis of any viscous sample. See Figure 5.
E Recommended for the analysis of any liquids; for volatile liquids we recommended the use of liquid sealing device (PN 205 030 02).
F Suggested for analysis of trace elements (N, C, S) in liquids such as water, wine, beer, milk, urine, etc.
G Suggested for the analysis of liquid samples when the material is available in very small amounts. Useful for volatile samples. Use of Sealing Device (PN 205 030 02) is highly recommended. For more details on Sealing Device please see Chapter 22, “Sample Preparation Accessories.”
H Use Sealing Device (PN 252 090 10)
I Use Sealing Device (PN 252 090 10)
Table 63. Silver Containers (See Figure 4)
Refer To: Description Qty Part Number
L Universal “Soft” Silver Containers 100 240 054 00
M “Soft” Silvers Containers 100 240 054 05
N “Hard” Silver Containers 50 240 051 00
Silver Container Type Use
L Recommended for Oxygen determination for solid samples.M Recommended for Total Organic Carbon (TOC) determination according to the Thermo
Fisher Scientific method (patent n. 90110186.5). See Figure 6. See “Kit for Total Organic Carbon (TOC) in Solid Sample PN 190 041 28,” .
N Recommended for Oxygen analysis of liquid samples (e.g. gasoline). The Sealing Device (PN 205 030 02), is highly suggested for these liquid samples.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 67
21 Sample Containers
Figure 5. Sampling Technique
Figure 6. T.O.C. Determination
Add Chromosorb �1 spatula
Weighing
Liquid Sampling Technique
TM
Add the liquid sample on the Chromosorb �surface
TM
Seal and Weigh
Viscous Sampling� Technique
Ag Capsules Add 5 - 20 mg of sample
WEIGHING
Add 1 drop of HCl 1:1
65 �C
Leave at 65 �C until dry
ANALYSING
1 2 3
4 5 6
Sampling Technique for T.O.C. Determination
68 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
21 Sample Containers
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 69
22
Sample Preparation Accessories
Table 64. Sample Preparation Accessories
Refer To: Description Qty Part Number
A Sealing Device for Solid Containers 1 205 003 10
B Sealing Device for Large Tin Containers 1 252 090 10
C Sealing Device for Liquid Containers 1 205 030 02
D Pocket Sample Holder for Small Containers 1 240 100 24
E Cleaning Device for Quartz Reactor and Crucible 1 276 060 10
F Cleaning Device for HPAR Reactor 1 205 006 25
-- Forceps 1 205 005 00
-- Crucible Extractor 1 205 006 27
-- HPAR Extractor 1 205 006 26
-- Small Spatula for Container Filling 1 205 006 00
-- Large Spatula for Container Filling 1 205 006 20
-- Microsyringe 710 SNR 100 μl 1 365 002 04
-- Microsyringe 10 μl 1 365 020 01
Table 65. Accessories Desciption
Reference Comments
A Available on request.
B Inserted in N/Protein, N-Brew, NC-Soils, NC-Sediments and NC Filters Standard Outfit.
C Liquid device for liquid containers (available on request), allows the analysis of hygroscopic solid compounds and volatile liquid substances without variation of weight. The samples are introduced in the container using a spatula, syringes or generic needles. We suggest the use of liquid tin containers or capillaries according to the viscosity of the liquid sample. The container is then placed in the sealing device slide. The container is to be purged with a flow of Oxygen or Helium before closing. The container is tightly closed and the constancy of weight is monitored by an electronic balance. For liquids with high vapor pressure use tin capillaries: the treatment with inert gas in not necessary because the vapor pressure generated by the liquid sample is sufficient to flush the atmospheric gases from the container.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 70
22 Sample Preparation Accessories
Figure 7. Accessories
D This device, available on request, is used to carry up to 52 weighed and sealed containers from the balance to the autosampler mounted on the instrument.
E Available in all FLASH 2000 Standard Outfit Configurations. Recommended tools to clean the reactor when replacing the catalyst.
F Inserted in N/Protein, N-Brew, NC-Soils, NC-Sediments and NC Filters Standard Outfit.
Table 65. Accessories Desciption (Continued)
Reference Comments
A B C
D E F
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 71
23
MAS 200R Autosampler for Solid Samples
MAS 200R Autosampler for sold samples is shown in Figure 8.
Figure 8. MAS 200R Autosampler for Solid Samples
Spare Parts
Table 66. MAS 200R Autosampler for Solid Sample - Spare Parts
No Description Qty Part Number
1 MAS 200R Autosampler (complete) one drum 1 251 174 00
2 Loading Spring 1 315 052 11
3 Positioning Spring 1 315 052 12
4 Gear Plate 1 358 006 26
5 MAS 200R Geared Motor 1 318 076 28
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 72
23 MAS 200R Autosampler for Solid Samples
Knurled Screws Kit
5 MAS 200R Plastic Front Cover 1 241 055 35
6 MAS 200R Complete Shaft (piston) 1 343 015 12
7 MAS 200R Drum No 1 (0 - 32 Position) 1 240 101 35
8 Additional MAS 200R Drum No 2 (33 - 63 Position) 1 240 101 36
9 Additional MAS 200R Drum No 3 (64 - 94 Position) 1 240 101 37
10 Additional MAS 200R Drum No 4 (95 - 125 Position) 1 240 101 38
11 Window O-ring (Set of 10) 1 290 300 14
12 MAS 200R Internal O-ring (Set of 10) 1 290 300 17
13 MAS 200R Plastic Cover 1 241 044 77
14 MAS 200R Assembly Motor 1 318 076 24
15 MAS 200R Plastic Window 1 301 080 20
Table 66. MAS 200R Autosampler for Solid Sample - Spare Parts (Continued)
Table 67. MAS 200R Autosampler for Solid Sample - Knurled Screws Kit
No Description Qty Part Number
1 Knurled Screws Kit (Set of 3) 1 190 042 57
This kit allows to further simplify the shaft cleaning procedure. By replacing with the practical finger-tightening knurled screws, the access to the shaft in the MAS 200R autosampler for maintenance, can be performed in a jiffy.
This kit is applicable on all MAS 200R models.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 73
23 MAS 200R Autosampler for Solid Samples
Switching Box
Figure 9. Swithcing Box for MAS 200R Autosampler
Table 68. MAS 200R Autosampler for Solid Sample - Swithcing Box
No Description Qty Part Number
1 Switching Box
When the analyzer is equipped with two MAS 200R autosamplers, it is possible to switch from a channel to the other by using the dedicated Switching Box as schematically shown in the figure below.
1 432 101 52
21
43
MAS200 R"A"
MAS200 R"B"
Autosampler
SWITCHINGBOX
A B
A B
74 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
23 MAS 200R Autosampler for Solid Samples
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 75
24
NoBlank Sampling Device
Figure 10. NoBlank Sampling Device
NoBlank sampler option is a special device, applied to OEA/IRMS and OEA instrument, which are the primary function to reduce the Nitrogen Blank Peak to a very low value. Reducing the Nitrogen Blank Peak Area means to increase the accuracy and precision power of the IRMS analyzer.
The NoBlank sampler option can be installed on:
• FLASH 2000 models, especially on IRMS and HT configurations
• TC/EA instruments and all previous Thermo Fisher Scientific OEA models as FLASH EA 1112, EA1110, EA 1108, NA 2500, etc.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 76
24 NoBlank Sampling Device
For Upgrading FLASH System
For Updating TC/EA and Previous OEA Models
No Blank Spare Parts
Table 69. NoBlank Sampling Device For Updating FLASH System
No Description Qty Part Number
1 No Blank Sampler Option
It is constituted to:
• NoBlank system
• Standard outfit
• Instruction manual
1 432 102 30
Table 70. NoBlank Sampling Device For Updating TC/EA and Previous OEA Models
No Description Part Number
1 No Blank Sampler Option 432 102 30
2 MAS 200 R with a 32 position drum 432 174 00
3 MAS Driver (for servo air automation to electric signal) 432 101 50
Table 71. No Blank Sampling Device Spare Parts
No Description Part Number
1 NoBlank rulon cone complete 281 135 20
2 NoBlank rulon cone o-ring 290 003 56
3 O-ring NoBlank bottom (Set of 5) 290 003 17
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 77
25
CM2 Manual Sampler
Figure 11. CM2 Manual Sampler
Table 72. CM2 Manual Sampler
No Description Qty Part Number
1 CM2 Manual Sampler 1 251 026 50
Note CM2 Manual Sampler can be installed on 18 mm OD Quartz Reactor and 25 mm OD HPAR Reactor. The CM2 Standard Outfit contains both connections. The CM2 Standard Outfit also includes parts used for the FLASH 2000 by using 18 mm OD reactors, for the FLASH EA 1112 and, EA 1110 Elemental Analyzers, and other parts only for any FLASH 2000 Configurations by using the 25 mm OD oxidation reactor. Refer to the following table.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 78
25 CM2 Manual Sampler
Part Number Part Description Instrument Configuration
350 084 17 Adapter for 18 mm OD reactors EA 1110 - FLASH EA 1112 - FLASH 2000
All the configurations (*)
350 014 27 Nut 304 EA 1110 - FLASH EA 1112 - FLASH 2000
All the configurations (*)
290 009 17 O-Ring 2068 EA 1110 - FLASH EA 1112 - FLASH 2000
All the configurations (*)
350 084 18 Adapter for 25 mm OD reactors FLASH 2000 - FLASH EA 1112 N/Protein - NC-Soils
350 014 65 Nut 1”1/4 FLASH 2000 - FLASH EA 1112 N/Protein - NC-Soils
(*) All the configurations except N/Protein and NC-Soils
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 79
26
AI/AS 3000 II Autosampler for Liquids for FLASH 2000
AI 3000 AS 3000
Table 73. AI3000 / AS 3000 II Autosampler for Liquid Samples for FLASH 2000
No Description Qty Part Number
1 AI 3000 Auto Injector for liquids 1 251 175 71
2 AS 3000 Auto Sampler for liquids 1 251 175 72
3 Upgrade option AI to AS 3000 II 1 190 502 94
4 10 μl syringe 1 365 005 25
5 50 μl syringe 1 365 040 40
6 100 μl syringe 1 365 040 41
7 250 μl syringe 1 365 040 42
8 0.5 μl syringe 1 365 040 45
9 8-position tray with label 1 240 101 40
10 105-position tray for AS 3000 1 240 101 45
11 Waste bottle complete with 5 septa and caps 1 240 124 16
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 80
26 AI/AS 3000 II Autosampler for Liquids for FLASH 2000
12 Complete Vials 2 SVW Package (Set of 100) [Require screw top cap with septa PN 386 060 85]
10 240 140 19
13 Vial Solvent 4 mL S T4-SVQ (Set of 5) [Require screw top cap with septa PN 386 060 85]
1 240 140 32
14 Septa 8-ST (Set of 5) 1 313 032 18
15 BTO Septa for FLASH 2000 injector (Set of 50) 1 313 032 30
16 Screw Caps for waste bottle (Set of 100) 1 386 060 74
17 Screw Caps 8-SC (Set of 5) 10 386 060 85
18 Insulating Collar 1 321 003 10
19 Insulating Injector for Biodiesel 1 247 052 50
Table 73. AI3000 / AS 3000 II Autosampler for Liquid Samples for FLASH 2000 (Continued)
For more details on Biodiesel liquid samples (AS 3000 and insulating injector & collar) require the OEA Application Note n. 11008
Table 74. AI 3000 / AS 3000 II Spare Parts
No Description Qty Part Number
1 AI/AS 3000 II M/S printing circuit board assy 1 152 200 80
2 Complete Base assy AI/AS 3000 II 1 221 071 10
3 Complete Top cover assy AI/AS 3000 II 1 241 055 70
4 Slide stepper motor AI/AS 3000 II 1 318 029 25
5 Front door AI/AS 3000 II 1 333 309 50
6 AI/AS 3000 bracket for FLASH 2000 1 368 127 42
7 Complete Tower assy AI/AS 3000 II 1 370 014 40
Table 75. AI 3000 / AS 3000 II Cables
No Description Qty Part Number
1 Power Cable 10A/250V 1 230 330 00
2 Power Cable 10A/125V 1 230 330 35
3 RS232 cable 1 230 435 01
4 Flat Cable Flex 26F/16F 1 230 456 65
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 81
27
Accessories for Injection of Liquid and Gas Samples
Table 76.
No Description Qty PN
1 Manual Injection Device for Liquid or Gas Sampling 1 190 041 38
The kit includes:
• Injector body for OEA
• Coupling joint for liquid/gas
• Injection connection
• Different septum holders for every FLASH 2000 and previous OEA models
• Syringes = 10 μL; 100 μL; 500 μL
• Septa BTO 11.5 mm OD (Set of 50)
Manual InjectionDevice
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 82
27 Accessories for Injection of Liquid and Gas Samples
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 83
28
Resting Foot Kit
In our continued instrumental design modification based on customer request to cover different lab table types we are now introduced the Resting Foot kit. The foot are robust, aluminum legs painted in the same FLASH color.
The function of the kit is to lift the FLASH chassis off the table top some additional millimeter (height: 25 mm) allowing more room for access the oven and opening of the traps compartment.
The Resting Foot Kit is an option and it can be order separately.
Table 77.
No Description Qty PN
1 Resting Foot Kit (Set of 4) 1 190 042 58
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 84
28 Resting Foot Kit
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 85
29
Recommended Spare Parts
Table 78. Recommended Spare Parts
No Description Qty Part Number
1 Complete Furnace (18 mm furnace adapter) 1 354 600 21
2 Complete Furnace (25 mm furnace adapter) 1 354 600 22
3 Complete HT Furnace (18 mm furnace adapter, max temperature 1450 °C) 1 354 600 35
4 HWD 430 Detector 1 419 075 10
5 Heater for Oven 1 354 215 10
6 Temperature Sensor Pt 100 for Oven 1 403 110 95
7 Thermocouple Pt/Pt-Rh 1 403 200 05
8 HT Thermocouple Pt/Pt-Rh for FLASH HT 1 403 200 06
9 Furnace Transformer for all FLASH versions except HT 1 413 250 75
10 Furnace Transformer for FLASH HT 1 413 250 76
11 3.6 V Battery 1 219 015 05
12 Fan V2S 1 406 003 00
13 Fuse, slow-blow, 1.6 A, 5x20 mm 1 282 040 18
14 Fuse, slow-blow, 800 mA, 5x20 mm 1 282 050 11
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 86
29 Recommended Spare Parts
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 87
30
FLASH 2000 FPD Option
The OEA / FPD option — PN 432 101 45 — increases the sensitivity in Sulphur determination by using a highly selective and sensitive Flame Photometric Detector (FPD) coupled with the FLASH 2000 Elemental Analyzer.
This FPD option can be applied to any FLASH 2000 configuration and it allows the determination of trace Sulphur (low limit: 10 ppm) in both liquid and solid compounds.
The OEA / FPD option comprises of:
• FPD 1112 detector module that includes the FPD detector and the pneumatic circuit to control the detector gases flows PN 432 098 86
• FPD control module to control the detector parameters.
• FPD standard outfit PN 165 001 10
Figure 12. FLASH 2000 with FPD Option
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 88
30 FLASH 2000 FPD Option
FPD Performance Specifications
OEA / FPD Reference Material
Table 79. FPD Performance Specifications
Performance Specifications
Low Limit 0.001% (10 ppm) SulphurMax Limit 0.5% (5000 ppm) Sulphur
(for more info refer to FLASH 2000 Technical Specifications)Gas Requirements Helium Chromatographic-grade purity
• Air 99.995%
• Hydrogen 99.995%Power Requirements 120/230 Vac; 50/60 HzHost Hardware Requirements Pentium Processor-operating system Windows® 2000 or XPHost Software Requirements Eager XperienceDimension Gas Control box: 177 x 235 x 287 mm (l x h x d)
FPD Control Module: 180 x 85 x 485 mm (l x h x d)Mass Gas Control box: 5 kg
FPD Control Module: 6 kg
Table 80. OEA / FPD Reference Material
Description Qty Part Number
Pasta Reference Material for Sulphur Determination (OEA/FPD) 2g 338 400 27
Soil Reference Material 2g 338 400 26
Reference Solutions Kit constituted by 4 flasks (2 mL each) containing 10, 50, 100 and 500 ppm of Sulphur
1 338 190 40
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 89
30 FLASH 2000 FPD Option
OEA / FPD Detector Spare PartsRefer to the following table:
Table 81. Flame Photometric Detector Spare Parts
Ref. Description Qty. Part Number
1 Mirror plug 350 053 50
2A Maintenance kit for FPD Graphite seal 2 190 045 89
2B Heat shield 2
2C VitonTM O-ring 3106 1
2D VitonTM O-ring 3175 1
2E VitonTM O-ring 75 SH 1
3 Detector body 1 190 501 11
4 Aluminium O-ring 1 290 032 30
5 FPD jet 1 404 045 11
6 Flange and relevant VitonTM O-ring 1 368 142 35
7 Interferential filter for sulphur 1 281 070 00
8 Photomultiplier 1 286 004 50
9 Heater/sensor/coil cable (1.5 m) 1 230 435 87
10 FPD fixing tool 1 205 021 50
Silcosteel tubing 1 m; 0.4 mm OD x 0.25 mm ID 1 391 100 25
Graphite ferrule ID 0.45 for silcosteel tubing (Set of 2) 1 290 134 87
Nut for silcosteel tubing (Set of 5) 1 350 324 23
90 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
30 FLASH 2000 FPD Option
Figure 13. FPD Spare Parts
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 91
31
Electronic Flow Controller Module
Table 82. EFC-t Module
No Description Qty Part Number
1 EFCt Module (complete) for FLASH 2000 models 1 425 091 50
2 Flow Sensor 1
3 2-way Valve (Normally Open) 1
4 2-way Valve (Normally Closed) 1
5 Proportional Valve 1
6 3-way Valve 1
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 92
31 Electronic Flow Controller Module
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 93
32
FLASH 2000 Electronics and Cables
Printed Circuit Boards
Table 83. Printed Circuit Boards
No Description Qty Part Number
1 TRF1112 Transformer Board 1 236 484 45
2 MB1112 Mother Board 1 236 484 50
3 AC1112 Alternative Current Board 1 236 484 55
4 TCR1112 Thermo Control Board 1 236 484 60
5 HWD1112 TCD Control Board 1 236 484 65
6 CPU1112 Central Processing Board 1 236 484 70
7 PWR1112 Power Supply Card 1 236 484 80
8 DPFC1112 Electronic Flow Control Board 1 236 484 90
9 LTA-1 Thermo Coupled Linearizer Box 1 209 017 00
10 LTA-1 HT 1 209 017 03
10 EV Control Box (Only for FLASH EA 1112 with non-thermostatted EFC module) 1 333 209 60
11 Synoptic Panel (Complete) 1 333 105 45
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 94
32 FLASH 2000 Electronics and Cables
Cables
Table 84. Cables
No Description Qty Part Number
1 Power Cable ( Part of the FLASH 2000 Standard Outfit) 1 230 330 00
2 RS 232 Cable ( Part of the FLASH 2000 Standard Outfit) 1 230 334 85
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 95
33
Eager Xperience Ethernet A/D
Ethernet Box Version PN 432 331 37This Kit allows to upgrade all Eager 200 to Eager Xperience.
The Eager Xperience Ethernet box comprises of:
• Ethernet adapter box
• Eager Xperience Program (CD-Rom)
• Eager Xperience Software Manual
• Connecting cables for FLASH 2000 and previous OEA modules.
Examples:
Eager Xperience Hardware Minimum Requirements
EA 1110 / Eager 200 EA 1110 / Eager Xperience (with a PC with the minimum requeriments listed below) + Ethernet box
FLASH (TCD) + Eager Xperience FLASH (TCD+FPD) + Eager Xperience + Ethernet box
Table 85. Hardware Minimum Requirements
Component Description
Computer Any PC can be used, including laptop computer
Operating System: Windows™ 2000 / XP / Vista
Hard drive with at least 1 GB free
One free COM port for instrument control
One free COM port for balance, if required
One free COM port for AI/AS 3000 II autosampler, if required
CD driver
Monitor Color 1024 x 768 or better
Printer Any printer accepted by the operating system
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 96
33 Eager Xperience Ethernet A/D
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 97
34
Single to Double Furnace Upgrade Kit
The kit allows to trasform the configuration of your analyzer, e.g CHN or CHNS, equipped with a single furnace, in a configuration having two furnaces (18 mm OD), e.g CHN-O or CHNS-O.
The kit is suitable for every FLASH 2000 models.
Table 86. Single to Double Furnace Upgrade Kit
No Description Qty Part Number
1 Single to Double Furnace Upgrade Kit
It is constituted to:
• Furnace (Complete)
• Plate
• Connections
• Fittings
• Accessories
• Cable
• Instruction manual
1 190 042 77
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 98
34 Single to Double Furnace Upgrade Kit
Figure 14. Furnace Compartment
Left furnace Right furnace
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 99
35
Furnaces Transformation Kits
FLASH 2000 Configuration
Configuration Furnace L Bottom Conn. L Furnace R Bottom Conn. R
CHN, CHNS, NCS, O yes (18 mm) 2x1 mm no no
CHN/O or CHNS/O yes (18 mm) 2x1 mm yes (18 mm) 2x1 mm
N Org yes (18 mm) 4x2 mm yes (18 mm) 4x2 mm
N Lubricant yes (25 mm) 6x4 mm yes (25 mm) 6x4 mm
NC org yes (18 mm) 4x2 mm yes (18 mm) 4x2 mm
NC Soils yes (25 mm) 4x2 mm yes (18 mm) 4x2 mm
N / Protein yes (25 mm) 6x4 mm yes (25 mm) 6x4 mm
FLASH 2000 IRMS yes (18 mm) 2x1 mm yes (18 mm) 2x1 mm
FLASH 2000 HT yes (18 mm)1 2x1 mm yes (18 mm)2 2x1 mm
1. O/N Determination 2. NC Determination
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 100
35 Furnaces Transformation Kits
Transformation Kits Available
IMPORTANT The transformation kits do not include the furnace but the adapters, connectors, plate assembly, etc.
According to the option reported in Table A and Table B, four different kits are available:
1 Transformation furnace kit (from 25 to 18 mm, bottom connector 2x1 mm) 190 042 51
2 Transformation furnace kit (from 25 to 18 mm, bottom connector 4x2 mm) 190 042 52
3 Transformation furnace kit (from 18 to 25 mm, bottom connector 6x4 mm) 190 042 71
4 Transformation furnace kit (from 18 to 25 mm, bottom connector 4x2 mm) 190 042 72
Example: from CHNS/O to NC Soils model
CHNS/O: 2 furnaces 18 mm; both bottom connections 2x1 mm
NC Soils: 2 furnaces (25 mm, 18 mm); bottom connection 4x2 mm
For this modification needs:
• Transformation kit (from 18 to 25 mm, bottom Conn. 4x2) n.1
• Bottom Connection (18 mm, 4x2 mm) n.1
• 4 x 2 SS tubing and relative joints
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 101
35 Furnaces Transformation Kits
If the User Wants to Add a New Furnace (and Upgrade the Instrument Configuration)
In this case the user needs need a complete furnace and a transformation furnace kit. A furnace will be chosen according to the application (18 or 25 mm type) while the kit will be used for find all the top level FLASH 2000 reactor connection (on the top level of the instrument) and for the bottom connection according to the analysis requested:
• 18 mm, bottom connection 2x1 mm
• 18 mm, bottom connection 4x2 mm
• 25 mm, bottom connection 6x4 mm
• 25 mm, bottom connection 4x2 mm
Example: CHN (single furnace) CHN/O (double furnaces)
For this modification needs:
• Complete furnace (18 mm diam) p/n 354 600 21
• Transformation kit (18 mm, bottom Conn. 2x1 mm) p/n 190 042 51
• 2 x 1 SS tubing and relative joints
102 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
35 Furnaces Transformation Kits
Transformation Furnace Kits ListThe items inserted in the transformation kits are here listed:
Table 87. Transformation Furnace Kit 18 to 25 mm bottom connection 6x4 mm
No Description Qty Part Number
Transformation Furnace Kit from 18 to 25 mm bottom connection 6 x 4 mm 1 190 042 71
1 Furnace Adapter 1
2 Bottom O-ring (Set of 5) 1
3 Top O-ring (Set of 5) 1
4 Seal for Furnace Adapter; 25 mm 1
5 Aluminium Ferrule; 2 mm diam. 6
6 Plate assembly (circular) 1
7 6MB nut (Set of 10) 1
8 Fixing Cup 1
9 Cup (5x3 mm) 4
10 Tube connector for PTFE; 5x3 mm 4
11 Top Connector (25 mm) 1
12 Screw (4x20 mm) 2
13 Polyethylene Tube; 5x3 mm; 1 m 1
14 Clip (Filter fixing) 4
15 Pressure Equilibration Cylinder 1
16 Clip (Pressure equil. Cylinder fixing) 1
17 Teflon Tube; 2x1 mm; 1 m 1
18 Bottom Connection (25 mm diam; 6x4 mm) 1
19 PTFE Tube; 6x4 mm; 1 m 1
20 OR/OV Viton 1
21 Nut, M 12x1 mm 1
22 Plate Assembly (rectangular) 1
23 Screws for plate assembly (circular) 3
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 103
35 Furnaces Transformation Kits
Table 88. Transformation Furnace Kit from 18 to 25 mm bottom connection 4x2 mm
No Description Qty Part Number
Transformation Furnace Kit from 18 to 25 mm bottom connection 4 x 2 mm 1 190 042 72
1 Furnace Adapter 1
2 Bottom O-ring (Set of 5) 1
3 Top O-ring (Set of 5) 1
4 Seal for Furnace Adapter 25 mm 1
5 Aluminium Ferrule 2 mm diam. 6
6 Plate assembly (circular) 1
7 6MB nut (Set of 10) 1
8 Fixing Cup 1
9 Top Connector (25 mm) 1
10 Screw (4x20 mm) 2
11 Clip (Filter fixing) 4
12 Teflon Tube; 2x1 mm; 1m 1
13 Bottom Connection (25 mm diam; 4x2 mm) 1
14 PTFE Tube; 4x2 mm; 1 m 1
15 4 mm OD Ferrule (Set of 10) 1
16 Nut, M1; 2x1 mm 1
17 Plate Assembly (rectangular) 1
18 Screws for plate assembly (circular) 3
104 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
35 Furnaces Transformation Kits
Table 89. Transformation Furnace Kit from 25 to 18 mm bottom connection 2x1 mm
No Description Qty Part Number
Transformation Furnace Kit from 25 to 18 mm bottom connection 2 x 1 mm 1 190 042 51
1 Furnace Adapter 1
2 Bottom O-ring for 18 mm OD Quartz Reactor (Set of 5) 1
3 Top O-ring for 18 mm OD Quartz Reactor (Set of 5) 1
4 Seal for Furnace Adapter 18 mm 1
5 Plate assembly (circular) 18 mm diam. 1
6 6MB nut (Set of 10) 1
7 Fixing Cup; 18 mm 1
8 Top Connector (18 mm) 1
9 Screw for Filter Clip 2
10 Filter Clip 2
11 Teflon Tube; 2x1 mm; 1 m 1
12 Bottom Connection; 18 mm diam; 2x1 mm 1
13 PTFE Tube; 2x1 mm; 1.5 m 1
14 Ferrule (Set of 10) 1
15 Plate Assembly (rectangular) 18 mm diam. 1
16 Screws for plate assembly (circular) 3
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 105
35 Furnaces Transformation Kits
Table 90. Transformation Furnace Kit from 25 to 18 mm bottom connection 4x2 mm
No Description Qty Part Number
Transformation Furnace Kit from 25 to 18 mm bottom connection 4 x 2 mm 1 190 042 52
1 Furnace Adapter 1
2 Bottom O-ring for 18 mm OD Quartz Reactor (Set of 5) 1
3 Top O-ring for 18 mm OD Quartz Reactor (Set of 5) 1
4 Seal for Furnace Adapter;18 mm 1
5 Plate assembly (circular) 18 mm diam. 1
6 6MB nut (Set of 10) 1
7 SS Tube; 2x1 mm 3 m
8 Top Connector 18 mm 1
9 Screw for Filter Clip 2
10 Filter Clip 2
11 Fixing Cup; 18 mm 1 m
12 Bottom Connection; 18 mm diam; 4x2 mm 1
13 PTFE Tube (4x2 mm) 1.5 m
14 Ferrule (Set of 10) 1
15 Fixing Nut 1
16 Ferrule 2x1 mm (Set of 10) 1
17 PTFE Tube; 2x1 mm; 1.5 m 1
18 Plate assembly (rectangular); 18 mm diam. 1
19 Screws for plate assembly (circular) 3
106 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
35 Furnaces Transformation Kits
Transformation Furnace Kit: Explanations on Some Items
Plate Assembly
The circular (18 and 25 mm) plate is used.
Top Connections
Circular plate
No Description Part Number
3 Circular plate Assembly 18 mm 350 084 60
4 Circular plate Assembly 25 mm 350 084 65
No Description Part Number
1 Top Connector 18 mm 350 084 21
2 Top Connector 25 mm 350 084 23
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 107
35 Furnaces Transformation Kits
Furnace AdaptersThe washer adapter (18 or 25 mm) is placed on the top of the furnace.
Under the washer is placed the suitable seal.
Bottom Connections
No Description Part Number
1 Furnace Adapter 18 mm 267 027 22
2 Furnace Adapter 25 mm 267 027 21
3 Seal for Furnace Adapter 18 mm 290 036 32
4 Seal for Furnace Adapter 25 mm 290 036 33
18 mm diameter 25 mm diameter
No Description Part Number
1 Bottom connection (18 mm diameter; 2x1) 350 084 33
2 Bottom connection (18 mm diameter; 4x2) 350 084 32
3 Bottom connection (25 mm diameter.; 6x4) 350 084 26
4 Bottom connection (25 mm diameter; 4x2) 350 084 31
108 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
35 Furnaces Transformation Kits
Bottom Connections for FLASH IRMS and HT (O/H and NC Determinations)
The FLASH bottom connection for IRMS and for HT is different from other OEA configurations. The bottom connection is constituted by the following parts:
According to the FLASH configurations, if necessary to have a complete system the following parts should be ordered:
• Bottom Connection (if requested)
• Reactors (quartz or special stainless steel)
• Crucible (quartz or special stainless steel)
• Filter (small or large)
• Separation column
• Catalysts
• Adsorber
No Description Part Number
1 Nut 350 114 10
2 Metal Ring 356 032 10
3 Washer 290 029 10
4 Reactor Coupling Union 350 084 27
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 109
36
MAS 200R Driver
The MAS 200R Driver is a device which allows to the older OEA models (EA 1110, NA 2100, EA 1108 etc.) equipped with the pneumatically actuated AS 128 or AS 200 autosamplers to be up-graded to the new electrically actuated MAS 200R.
AS 128 / AS200
Pneumatic actuated autosamplers for EA1110, EA 1108 and TC/EA, NA2500, NA1500 etc.
Utilities: Servo Air + Helium / Oxygen
The AS 128 and AS 200 on previous OEA models can be replaced by this system:
MAS 200R (PN 251 17400) + MAS 200R Driver (PN 432 10150)
Utilities: Helium / Oxygen
The MAS 200R Driver is easy to install and it will be provided with a detailed installation guide.
MAS200 R Driver
AC Adapter
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 110
36 MAS 200R Driver
No Description Qty Part Number
1 MA S200R Driver
The MAS 200R Driver includes:
• MAS 200R Driver base unit
• AC adapter / power module
• Power cord
• Cable provided
• Cable for IRMS
1 432 101 50
Dimensions & mass:
• Dimensions (w x d x h): 80 x 146 x 45 mm
• Mass (MAS 200R Driver base unit): 200 g
• Mass (MAS 200R Driver complete including power module, cables etc.): 900 g
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 111
37
FLASH 2000 System Qualification Package
Qualification is a process to evaluate and certify the performances of the instrument.
Qualification is a process of signing, dating and executing a Set of qualifications which can be stored in the Thermo Qualification folder.
FLASH 2000 equipment and the relative Eager Xperience software is validated for the installation (Installation Qualifications IQ), operation (Operation Qualification OQ) and performance (Performance Qualification PQ).
The procedure requires typically two (2) days of “on-site” testing including executing, dating, and signing a Set of qualifications which are stored in the Thermo Qualification Folder.
For the FLASH Qualification are requested:
• The FLASH Qualification Package folder (PN 199 100 21)
• One (or more) qualification kit according to the configuration which consists of consumables, standards, filters and GC separation column (all components required for the qualification procedure).
Chart of Qualification Kits
No Description Qty Part Number
1 FLASH 2000 System Qualification Package Folder
Including AI/AS 3000 II for OEA Qualification Package
1 199 100 21
No Description Qty Part Number1 CHN Qualification Kit 1 190 042 802 CHNS Qualification Kit 1 190 042 853 O Qualification Kit 1 190 042 904 N Org Qualification Kit 1 190 042 955 NC Org Qualification Kit 1 190 043 006 NCS Qualification Kit 1 190 043 057 NC-Soil Qualification Kit 1 190 043 108 N/Protein Qualification Kit 1 190 043 159 N-Brew Qualification Kit 1 190 043 2010 AI/AS 3000 Qualification Kit 1 190 043 25
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 112
37 FLASH 2000 System Qualification Package
WARNING The FLASH 2000 Qualification can be done with Thermo Fisher Scientific OEA consumables esclusively. The FLASH 2000 Qualification can be carried out only by trained Thermo Fisher Scientific OEA specialist.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 113
2 Part
Thermo Scientific FLASH 4000
38
FLASH 4000 N/Protein Determination
Table 91. Consumables and Spare Parts for FLASH 4000 N/Protein Determination
No Description Qty Part Number
Bottom and Top O-ring SI 80 (Set of 5) 1 290 106 84
Quartz Wool (15 g) 1 338 220 05
Copper Oxide (100 g) 1 338 217 20
Platinum supported on Alumina (100 g) 1 338 390 55
Copper (220 g) 1 338 353 05
Empty HPAR 4000 reactor 1 468 02020
HPAR 4000 Crucible (Complete) 1 252 050 15
Ceramic disk (sample of 20) 1 272 045 05
Crucible Single Tube 1 252 050 35
Silicon O-ring HPAR crucible (Set of 5) 1 290 106 84
Lubricant for O-ring (50 g) 1 290 000 57
Separation column N/Protein FLASH 4000, 840 mm length 1 260 082 30
Tin disks; 62 mm diameter (Set of 100) 1 252 080 19
Tin disks; 85 mm diameter (Set of 100) 1 252 080 21
Curved tweezer 1 205 005 00
Plastic flat tweezer 1 205 005 05
Spatula 1 205 006 21
EDTA standard (100 g) 1 338 001 10
Glucose (100 g) 1 338 001 15
Pasta Reference Material (100 g) 1 338 400 28
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 116
38 FLASH 4000 N/Protein Determination
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 117
39
Kit of Consumables for FLASH 4000
Kit for 1000 Analyses
Kit for 5000 Analyses
Table 92. Kit for 1000 Analyses
No Description Qty Part Number
Kit for 1000 analyses 1 190 024 40
Tin disks 62 mm OD; 10 μm thickness (Set of 100) 10 252 080 19
HT ceramic disk for crucible (Set of 20) 1 272 045 05
O-ring for upper and button connections SI80 (Set of 5) 1 290 106 84
EDTA Standard (Flask of 100 g) 1 338 001 10
Glucose (Flask of 100 g) 1 338 001 15
Copper Oxide (100 g) 1 338 217 20
Quartz Wool (15 g) 1 338 220 05
Reduced Copper (Flask of 220 g) 4 338 353 05
Platinum supported on Alumina (100 g) 1 338 390 55
Pasta Reference Material (100 g) 1 338 400 28
Table 93. Kit for 5000 Analyses
No Description Qty Part Number
Kit for 5000 analyses 1 190 024 50
Tin disks 62 mm OD; 10 μm thickness SI80 (Set of 100) 50 252 080 19
HT ceramic disk for crucible (Set of 20) 5 272 045 05
O-ring for upper and button connections SI 80 (Set of 5) 1 290 106 84
EDTA Standard (Flask of 100 g) 3 338 001 10
Glucose (Flask of 100 g) 3 338 001 15
Copper Oxide (100 g) 5 338 217 20
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 118
39 Kit of Consumables for FLASH 4000
Kit for 1000 Analyses AI/AS 3000 II
Quartz Wool (15 g) 5 338 220 05
Reduced Copper (Flask of 220 g) 20 338 353 05
Platinum supported on Alumina (100 g) 5 338 390 55
Pasta Reference Material (100 g) 3 338 400 28
Table 93. Kit for 5000 Analyses (Continued)
No Description Qty Part Number
Table 94. Kit for 1000 Analyses AI/AS 3000 II
No Description Qty Part Number
Kit for 1000 analyses AI/AS 3000 II for liquid sample 1 190 042 78
Complete vial 2 SVW (Set of 100) 10 240 140 19
Vials solvent 4 mL (Set of 5) 1 240 140 32
Bottom O-ring (Set of 5) 1 290 206 49
Top O-ring (Set of 5) 1 290 206 82
Septa for Waste bottle (Set of 5) 1 313 032 18
Septa for FLASH 4000 injector (Set of 50) 1 313 032 30
Copper Oxide (100 g) 1 338 217 20
Quartz Wool ( 15 g) 1 338 222 05
Reduced Copper (Flask of 220 g) 4 338 353 05
Platinum supported on Alumina (100 G) 1 338 390 55
Screw caps 8-SC (Set of 5) 1 386 060 85
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 119
40
Reactor, Crucible, Separation Column and Fittings
Reactor
Crucible
Table 95. Reactor
No Description Qty Part Number
1 Empty HPAR 4000 reactor 1 468 020 20
2 Cleaning device for HPAR reactor 1 205 006 25
3 HPAR reactor extractor 1 205 006 29
4 Silicon O-ring for upper and button connections (Set of 5) 1 290 106 84
Table 96. Crucible
No Description Qty Part Number
1 HPAR 4000 crucible complete (upper + bottom parts) 1 252 050 15
2 Crucible bush (collar) 1 252 050 20
3 Crucible upper part 1 252 050 25
4 Crucible bottom part (ash tray) 1 252 050 30
5 Crucible extractor 1 205 006 29
6 Crucible Single Tube 1 252 050 35
7 High temperature ceramic disk (Set of 20) 1 272 045 05
8 Cleaning device for crucible 1 276 060 10
9 Silicon O-ring for HPAR 4000 crucible (Set of 5) 1 290 106 84
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 120
40 Reactor, Crucible, Separation Column and Fittings
Separation Column
Fittings
Table 97. Separation Column
No Description Qty Part Number
1 Separation column N/Protein FLASH 4000, 840 mm length 1 260 082 30
Table 98. Tubings
No Description Qty Part Number
1 PTFE white tubing 1/8-in OD 1 m 420 011 00
2 PTFE red tubing 1/8-in OD 1 m 420 011 05
3 PTFE blue tubing 1/8-in OD 1 m 420 011 10
4 PTFE green tubing 1/8-in OD 1 m 420 011 15
5 Copper tubing 1/8-in OD - 1/16-in ID 2.6 m 420 011 20
6 PTFE white tubing 1/4-in 2 m 420 011 25
Table 99. Nuts
No Description Qty Part Number
1 PTFE nut for 1/8-in tubing connection [Water drain] (Set of 5) 1 350 024 38
2 PTFE nut for 1/4-in tubing connection [Water drain] (Set of 5) 1 350 024 39
3 Brass nut 1/8-in (Set of 5) 1 350 130 63
4 Brass nut 1/4-in (Set of 5) 1 350 130 64
Table 100.Ferrules
No Description Qty Part Number
1 PTFE ferrule 1/8-in; back + front (Set of 10) 1 290 046 00
2 PTFE ferrule 1/4-in; back + front; single piece 1 290 046 97
3 Brass ferrule 1/8-in; back + front (Set of 5) 1 290 246 66
4 Brass ferrule back + front; single piece; for 10-mm OD tubing 1 290 046 69
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 121
41
Consumables and Miscellanea
Consumables
Miscellanea
Table 101.Reactor
No Description Qty Part Number
1 Sample holder (12 positions) 1 240 100 49
2 Tin disks 62 mm OD; 10 μm thickness (Set of 100) 1 252 080 19
3 Tin disks 85mm OD; 10 μm thickness (Set of 100) 1 252 080 21
4 HT ceramic disk for crucible (Set of 20) 1 272 045 05
5 Lubricant (silicon grease) 1 290 000 57
6 EDTA Standard (100 g) 1 338 001 10
7 Glucose (100 g) 1 338 001 15
8 Copper Oxide (100g) 1 338 217 20
9 Quartz Wool (15g) 1 338 220 05
10 Reduced Copper (220 g) 1 338 353 05
11 Platinum supported on Alumina (100g) 1 338 390 55
12 Pasta Reference Material (100g) 1 338 400 28
Table 102.Miscellanea
No Description Qty Part Number
1 2.5-mm Allen wrench 1 205 018 03
2 3-mm Allen wrench 1 205 018 04
3 Phillips screwdriver 1 205 026 09
4 1/2-in; 9/16-in wrench 1 205 030 04
5 5.5-mm wrench 1 205 030 05
6 7-mm wrench 1 205 030 07
7 7/16-in wrench 1 205 030 15
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 122
41 Consumables and Miscellanea
8 18/19-mm wrench 1 205 030 20
9 Door hinge 1 212 040 50
10 LED panel 1 333 153 10
11 Check valve (It is placed in the carrier line before the vent) 1 405 095 10
Table 102.Miscellanea (Continued)
No Description Qty Part Number
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 123
42
Analytical Standards & Reference Material
Standard
Reference Material
Table 103.Analysis Standards
No Description Qty Part Number
EDTA standard (100 g) 1 338 00110
Glucose (100 g) for Blank analysis 1 338 00115
Pasta Reference Material 1 338 400 28
Standard N% C% H% S% O%
EDTA 9.59 --- --- --- ---
Reference Material N% C% H% S% O%
Pasta (Batch H13A) 1.89 --- --- --- ---
IMPORTANT All the standards and the references material are accompanied with a quality certificate including the storage condition and the lifetime of the products.
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 124
42 Analytical Standards & Reference Material
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 125
43
Sample Preparation Accessories
Sample Containers
Table 104.Sample Containers
No Description Qty Part Number
Tin disk 62 mm (Set of 100) 1 252 080 19
Tin disk 85mm (Set of 100) 1 252 080 21
Table 105.Sample Preparation Accessories
No Description Qty Part Number
1 Tin disk 62 mm (Set of 100) 1 252 080 19
2 Tin disk 85mm (Set of 100) 1 252 080 21
3 Curved tweezer 1 205 005 00
4 Plastic flat tweezer 1 205 005 05
5 Spatula 1 205 006 21
6 Cleaning device for HPAR reactor 1 205 006 25
7 Capsulator (complete of cylindrical tool) 1 252 053 00
8 HPAR reactor extractor 1 205 006 26
9 Crucible extractor 1 205 006 29
10 Cleaning device for crucible 1 276 060 10
11 FLASH 4000 sample holder (12 positions) 1 240 100 49
Capsulator
Cylindrical tool
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 126
43 Sample Preparation Accessories
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 127
44
MAS 4000 Autosampler
Figure 15. MAS 4000 Autosampler
Spare Parts
Table 106.MAS 4000 Spare Parts
No Description Qty Part Number
1 MAS 4000 complete with one sample tray (from 1 to 31 samples) 1 251 175 00
2 MAS 4000 base body without piston 1 247 037 00
3 Plastic cover for sample tray 1 241 011 05
4 O-ring (OR 2056) 1 290 003 15
5 Viewer 1 310 007 00
6 Viewer support 1 310 007 05
7 Viewer lens 1 310 008 00
8 Sample tray motor 1 318 079 10
9 Piston motor 1 318 079 10
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 128
44 MAS 4000 Autosampler
10 Sample tray #1 numbered from 1 to 31 1 334 096 00
11 Sample tray #2 numbered from 32 to 62 1 334 096 10
12 Sample tray #3 numbered from 63 to 93 1 334 096 20
13 Sample tray #4 numbered form 93 to 124 1 334 096 30
14 Piston 1 343 015 15
Table 106.MAS 4000 Spare Parts (Continued)
No Description Qty Part Number
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 129
45
AI/AS 3000 II Autosampler for Liquids for FLASH 4000
AI 3000 AS 3000
Table 107.AI3000 / AS 3000 II Autosampler for Liquid Samples for FLASH 4000
No Description Qty Part Number
1 AI 3000 Auto Injector for liquids 1 251 175 73
2 AS 3000 Auto Sampler for liquids 1 251 175 74
3 Upgrade option AI to AS 3000 190 502 94
4 10 μl syringe 1 365 005 25
5 50 μl syringe 1 365 040 40
6 100 μl syringe 1 365 040 41
7 250 μl syringe 1 365 040 42
8 0.5 μl syringe 1 365 040 45
9 8-position tray with label 1 240 101 40
10 105-position tray for AS 3000 II 1 240 101 45
11 Waste bottle complete with 5 septa and caps 1 240 124 16
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 130
45 AI/AS 3000 II Autosampler for Liquids for FLASH 4000
12 Complete Vials 2 SVW Package (Set of 100) [Require screw top cap with septa PN 386 060 85]
10 240 140 19
13 Vial Solvent 4 mL S T4-SVQ (Set of 5) [Require screw top cap with septa PN 386 060 85]
1 240 140 32
14 Septa 8-ST (Set of 5) 1 313 032 18
15 BTO Septa for FLASH injector (Set of 50) 1 313 032 30
16 Screw Caps for waste bottle (Set of 100) 1 386 060 74
17 Screw Caps 8-SC (Set of 5) 10 386 060 85
Table 107.AI3000 / AS 3000 II Autosampler for Liquid Samples for FLASH 4000 (Continued)
Table 108.AI 3000 / AS 3000 II Spare Parts
No Description Qty Part Number
1 AI/AS 3000 II M/S printing circuit board assy 1 152 200 80
2 Complete Base assy AI/AS 3000 II 1 221 071 10
3 Complete Top cover assy AI/AS 3000 II 1 241 055 70
4 Slide stepper motor AI/AS 3000 II 1 318 029 25
5 Front door AI/AS 3000 II 1 333 309 50
6 AI/AS 3000 II bracket assy for FLASH 4000 1 382 127 44
7 Complete Tower assy AI/AS 3000 II 1 370 014 40
Table 109.AI 3000 / AS 3000 II Cables
No Description Qty Part Number
1 Power Cable 10A/250V 1 230 330 00
2 Power Cable 10A/125V 1 230 330 35
3 RS232 cable 1 230 435 01
4 Flat Cable Flex 26F/16F 1 230 456 65
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 131
46
Recommended Spare Parts
Pressure Regulators and Manometer
Detector Oven
Furnace
Table 110.Pressure Regulators and Manometer
No Description Qty Part Number
1 Pressure regulator PRV 20M 1 425 091 70
2 Manometer 0-300 kPa (0-3 bar) 1 367 160 60
3 Manometer 0-500 kPa (0-5 bar) 1 367 160 41
4 Manometer 0-1000 kPa (0-10 bar) 1 367 160 58
Table 111.Detector Oven
No Description Qty Part Number
1 HWD 430 Thermo Conductivity Detector (Hot Wire detector) 1 419 075 10
2 Heater element 70 W; 220 V 1 354 215 20
3 Pt 100 probe complete 1 403 112 70
Table 112.Furnace
No Description Qty Part Number
1 Furnace complete 1 354 600 40
2 Furnace bottom connector 1 350 084 80
3 Thermocouple Pt/Pt-Rh for FLASH 4000 1 403 200 04
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 132
46 Recommended Spare Parts
EV (electrovalves) Block
Regenerative Carbon Dioxide Filter
Water Drain
Table 113.EV Block
No Description Qty Part Number
1 EV block assy (complete) 1 425 091 28
2 Three-way solenoid valve 1 405 161 57
Table 114.Regenerative Carbon Dioxide Filter
No Description Qty Part Number
1 Regenerative CO2 Filter assembly 1 281 140 05
Table 115.Water Drain
No Description Qty Part Number
1 Water drainage condenses assembly 1 119 320 90
2 Peltier cell (without CLR-EAX board) 1 119 321 00
3 Solenoid valve for Peltier cell 1 333 211 05
4 CLR-EAX board 1 236 491 80
5 Peltier bottle (250 mL) 1 240 145 49
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 133
47
Electronic Flow Control Module (EFCt)
Table 116.Electronic Flow Control Module (EFCt)
No Description Qty Part Number
1 EFCt Module (complete) for FLASH 4000 1 425 091 60
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 134
47 Electronic Flow Control Module (EFCt)
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 135
48
Electronics
Mains and High Voltage Printed Circuit Boards
Low Voltage Printed Circuit Boards
Table 117.Mains
No Description Qty Part Number
1 Transformer 2 kW (complete) 1 206 039 10
2 Breaker 16 A 1 237 099 16
3 PWR EAX (Power supply board) 1 236 491 65
4 ACS EAX (Furnace board) 1 236 491 70
Table 118.Printed Circuit Boards
No Description Qty Part Number
1 EFC-CS (Power supply for EFXC-EAX board) 1 236 491 45
2 HWD-EAX (Detector) 1 236 491 40
3 FRT-EAX (Status panel) 1 236 491 50
4 MBR-EAX (Mother board) 1 236 491 55
5 CPU-EAX (CPU) 1 236 491 60
6 EXT-EAX (External communication) 1 236 491 75
7 CLR-EAX (Peltier element control) 1 236 491 80
8 EFC-EAX (Control for EFCt) 1 236 491 85
9 MAS 400 Autosampler pcb 1 236 491 90
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 136
48 Electronics
Fuses
Fans
Cables
Extension Card
Table 119.Fuses
No Description Qty Part Number
1 F1A; IEC 127/I; 5x 20 mm (PWR-EAX board) 1 282 000 14
2 T315mA; IEC 127/III; 5x20 mm (PWR-EAX board) 1 282 040 11
3 T3.15A; IEC 127/III; 5x20 mm (ACS-EAX board) 1 282 040 21
4 FF16A; IEC 269; 6.3 x 32 mm (ACS-EAX board) 1 282 040 25
5 FF20A; CH10gC; 10 x 38 mm (ACS-EAX board) 1 282 040 26
Table 120.Cables
No Description Qty Part Number
1 Rear panel fan 220 V ac; 50 Hz 1 406 003 00
2 Furnace fan (Left side) 1 406 006 95
3 Fan assembly complete (230 V ac) 1 406 006 82
Table 121.Cables
No Description Qty Part Number
1 Power Cable (Part of the FLASH 4000 Standard Outfit) 1 230 330 25
2 RS 232 Cable (Part of the FLASH 4000 Standard Outfit) 1 230 434 85
3 LAN Cable (Part of the FLASH 4000 Standard Outfit) 1 230 434 89
4 UTP Patch Cable cross. (RED) (Part of the FLASH 4000 Standard Outfit) 1 230 435 93
Table 122.Extension Card
No Description Qty Part Number
1 FLASH 4000 Extension Card (Useful for service engineers diagnostic purpose) 1 236 491 95
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 137
3 Part
Previous FLASH Configurations
49
FLASH EA 1112 Elemental Analyzer
Electronic Flow Controller Modules
Oxygen Line Purge Kit for FLASH EA 1112 PN 190 042 60The Oxygen Line Purge kit permits to eliminate the diffused air present in the pneumatic circuit of the oxygen line decreasing, at this way, the blank value and optimizing the OEA analysis.
The presence of the diffused air in the oxygen line may be due to the following reasons:
• damaged or worn out cylinder pressure regulator
• the length of the oxygen pneumatic line
The kit contains all the materials required to install the Oxygen Line Purge Kit on your FLASH EA 1112:
Table 123.EFC-t Module
No Description Qty Part Number
1 EFCt Module (complete) for FLASH EA 1112 models with serial number S/N upper than 20034906
1 425 091 50
1 EFC Module (complete) for FLASH EA 1112 models with serial number S/N up to 20034906
1 425 090 95
Part Number Description Quantity
290 040 45 Aluminium ferrules 10
347 081 03 Tee connection 1
350 004 03 6MB retaining nuts 7
391 024 00 2x1 mm SS tubing 30 cm
405 107 00 Needle valve 1
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 140
49 FLASH EA 1112 Elemental Analyzer
FLASH EA 1112 System Validation PackageValidation is a process to evaluate and certify the performances of the instrument.
Validation is a process of signing, dating and executing a Set of qualifications which can be stored in the Thermo Validation folder.
FLASH EA 1112 equipment and the relative Eager 300 software is validated for the installation (Installation Qualifications IQ), operation (Operation Qualification OQ) and performance (Performance Qualification PQ).
The procedure requires typically two (2) days of “on-site” testing including executing, dating, and signing a Set of qualifications which are stored in the Thermo Validation Folder.
For the FLASH validation are requested:
• The FLASH Validation Package folder (PN 199 100 30)
• One (or more) validation kit according to the configuration which consists of consumables, standards, filters and GC separation column (all components required for the validation procedure).
Chart of Validation Kits
No Description Qty Part Number
1 FLASH EA 1112 System Validation Package Folder
Including AI/AS 3000 for OEA Validation Package PN 199 100 05
1 199 100 30
No Description Qty Part Number1 CHN Validation Kit 1 190 042 802 CHNS Validation Kit 1 190 042 853 O Validation Kit 1 190 042 90
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 141
49 FLASH EA 1112 Elemental Analyzer
Transformation Furnace Kit: Explanations on Some Items
Plate Assemblies
The rectangular (18 and 25 mm) plate has been mounted on FLASH EA 1112 till fall 2003 (serial n.20034136) and then it has been substituted by the circular (18 and 25 mm) plate. Both Plate Assemblies (rectangular & circular) are inserted in the Transformation Kits.
4 N Org Validation Kit 1 190 042 955 NC Org Validation Kit 1 190 043 006 NCS Validation Kit 1 190 043 057 NC-Soil Validation Kit 1 190 043 108 N/Protein Validation Kit 1 190 043 159 N-Brew Validation Kit 1 190 043 2010 AI/AS 3000 Validation Kit 1 190 043 25
WARNING The FLASH EA 1112 Validation can be done with Thermo Fisher Scientific OEA consumables esclusively. The FLASH EA 1112 Validation can be carried out only by trained Thermo Fisher Scientific OEA specialist.
Rectangular Circular
No Description Part Number
1 Plate Assembly (Rectangular) 18 mm 334 012 29
2 Plate Assembly (Rectangular) 25 mm 334 012 30
3 Plate Assembly (Circular) 18 mm 350 084 60
4 Plate Assembly (Circular) 25 mm 350 084 65
142 FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog Thermo Scientific
49 FLASH EA 1112 Elemental Analyzer
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 143
A
Customer Communication
Thermo Fisher Scientific provides comprehensive technical assistance worldwide and is dedicated to the quality of our customer relationships and services.
How to Contact UsThis appendix contains contact information for Thermo Fisher Scientific office. To contact your local Thermo Fisher Scientific office or affiliate, please refer to:
Thermo Fisher Scientific
19 Mercers Row, Cambridge, CB5 8BZ United Kingdom
Tel: +44(0)1223 347400 Fax: +44(0)1223 347403
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 144
A Customer Communication
[Empty Page]
Thermo Scientific FLASH 2000 and FLASH 4000 Consumables and Spare Parts Catalog 145