TEChNoLoGY
www.klauke.com
The first electromechanical crimping tool
with PowerSense technology
©201
4GustavKlaukeGmbH
,Allrig
htsreserved.S
ubjectto
technicalchangeswithoutn
otice.BRM
ICRO
GB5.00
012
/14III
Times change.
And so do requirements.
Fast, light, efficient – the way you crimp today. The new way of crimping for cross-sections up to 50 mm2: Klauke micro. As fast and easy to use as a mechanical crimping tool, as powerful and efficient as a hydraulic tool.
The unique PowerSense technology – “Manual pre-clamping, motorized crimping” makes the crimping process revolutionary simpler and at the same time more efficient than ever.
ELECTRomEChANICAL CRImPING TooL
Register nowTool Certi�catio
n
Gep
rü
fte Qualität
clamp crimp
PowerSenseTechnology
Very easy handling thanks to PowerSense technology
Automatic retraction when operation is complete
Interchangeable Klauke 50-series crimping dies for all common applications up to 50 mm²
Electronic control with blocking function and motor stall protection
High speed Crimping time < 1.5 sec.
Ergonomic two-component housing in Klauke “In-line Design”
Very low weight tool incl. battery < 1 kg
LED light to illuminate working area
10.8 V lithium-ion battery with charge level indicator
Long service life with service intervals of 35,000 cycles
Micro compact, maximum efficiency
Whetheryouwanthighspeed,lowweightorefficientdrivetechnology,theKlaukemicro
combinesthebenefitsofmanualcrimpingtoolswiththeconvenienceofbattery-powered
hydraulictoolsinjustonedevice.Thankstoitscompactdesignitisidealforjobswhere
connectingmaterialhastobecrimpedquicklyandinahighvolumeontheonehandand
alsowhereverahandy,mobiletoolisrequired,e.g.forswitchcabinetconstructionand
numerousotherinstallationapplicationsintradeandindustry.TheKlaukemicroistheideal
solutionforthosewhowantboth–maximumefficiencyandoptimumeaseofuse.
1. Manual pre-clampingoperating the lever closes the crimping jaws without any exertion on the part of the user and fixes the connecting material. In this “pre-clamped” state it is still possible to adjust the position and the alignment.
THe revoluTionary PowerSenSe TeCHnoloGy
crimp
Balanced and drop-proofthanks to key ring for use with balancer
or for securing in field work
Smart and powerfulwith multi-function LED for maintenancecontrol and data transfer as well as a powerful lithium-ion battery with charge level indicator
versatilefor comfortable crimping of cable connections, cable end-sleeves and cable lugs
innovative single-lever control for all tool functions
Technologies develop.
leD lightto illuminate working area
… and doneThe retraction to the starting position is also fully automatic. During the entire crimping cycle the process can be interrupted by actuating the lever in the opposite direction.
2. Motorized crimpingFurther actuation or “pulling back” the lever starts the crimping process fully automatically using the power of the integrated motor.
• Kartonboxwithtoolandbattery
• EK50MLElectromechanicalcrimpingtool 0.14-50mm2
• BatteryRAML1,10.8V/1.5Ah
Suitable forConnecting material
Crimpingrange
Crimping profile
Tubular cable lugs and connectors – Cu, standard design
0.75 - 10 mm²
16 - 25 mm²
Solderless terminals (DIN 46234) and pin terminals (DIN 46230),solderless connectors (DIN 46341)
0.5 - 10 mm²
Cable end-sleeves 0.14 - 50 mm²
Insulated cable connections 0.1 - 16 mm²
Non-insulated receptacles 0.25 - 6 mm²
You will find more available dies in our catalogue or at www.klauke.com
©201
4GustavKlaukeGmbH
,Allrig
htsreserved.S
ubjectto
technicalchangeswithoutn
otice.BRM
ICRO
GB5.00
012
/14III
Gustav Klauke GmbHAuf dem Knapp 4642855 Remscheid Germany
Phone +49 2191/907- 0Fax +49 2191/907-141Email [email protected] www.klauke.com
Technical dataCrimping force 15 kN (max.)
Crimping range 0.14 - 50 mm²
Crimping time < 1.5 sec. (depending on connecting material)
Number of crimps per battery charge
approx. 300 at 10 mm² Cu DIN 46234
Battery voltage 10.8 V
Battery capacity 1.5 Ah, Li-Ion
Charging time approx. 40 min.
Weight incl. battery 0.96 kg
Ambient temperature -10 °C up to +40 °C
Scope of supply part no. LBOXXEK50ML :
• Highlyimpact-resistantL-BOXXforstorageoftools, connectorsandaccessories
• EK50MLElectromechanicalcrimpingtool 0.14-50mm2
• BatteryRAML1,10.8V/1.5Ah
• BatterychargerLGML1
• 4differentcrimpingdiesforconnectionmaterial included: cableend-sleeves10-50mm2,
insulatedconnectors10-16mm2, tubularcablelugsandconnectors16-25mm2
• K118Hand-operatedcuttingtoolforCuandAlcablesupto12mmdia.
• VDEPlus/Minusscrewdriver,Z1
• KL645GSKCableknifewithbladeprotection,1,000V
• Insulatedcableend-sleevesDIN46228part4,10-50mm2
• InsulatedsolderlessterminalsM6,fork-type,10mm2
• TubularcablelugsM8,16-25mm2
Scope of supply part no. EK50ML :
• Sturdyplasticcaseforstorageoftooland accessories
• EK50MLElectromechanicalcrimpingtool 0.14-50mm2
• BatteryRAML1,10.8V/1.5Ah
• BatterychargerLGML1
• CrimpingdieIS5071forcrimping insulatedconnectors0.5-6mm2
Scope of supply part no. EK50ML-L :
Accessory :
• USBadapterPGA1