that's how professionals do their work.
General InformatIon
All attachments, ready to install, will be provided with appropriate tool mount. Hydraulic tubes with clutches are within the scope of supply, but have to be checked and may have to be adjusted.
All indicated measures, weights, load carrying capacities, illustrations and technical information are without engagement. We reserve a design modification.
The indicated load carrying capacities refer to the attachment. The capacitys indication refers to filling capacity according ISO 7546.
Our indications are minimum face values, which the attachment can convey in accordance with appropriate use.
In case of attachments to rack vehicles with higher lifting capacity, the permitted indications of the accessory equipment (bulk, weight, load carrying capacity) may not be exceeded.
PrIces
With this price lists appearance, all previous price lists or price announcements lose validity. The same applies to all prices in EURO, mentioned on the price list, plus legal VAT.
Delivery is effected in accordance with our general terms and conditions as well as our terms of payment and delivery.
Download AGB: www.hesse-metalltechnik.deDate of price list: Nov. 2019
Our prices are calculated ex works, packing excluded and without transport insurance, extra charge for logistics € 25,- per attachment
colour cataloGue
RAL 9005 deep black
RAL 7043 grey
RAL 7024 graphite grey
Hesse metalltechnik – Your specialist for attachments and tools for
agricultural machinery and commercial vehicles
Hesse Metalltechnik GmbH, based in Bad Sassendorf / North Rhine-Westphalia, is a family-owened enterprise with a long tradition. The German Company, which was founded over 175 years ago, is specialized in producing attachments for agricultural machinery and commercial vehicles. The combination of expertise, professional know-how and innovative technology is one of our strengths. We focus on developing and refining serial and customized products to meet our customers requirements. Our wide range of products consists of attachments for front-, court-, wheel- and telescopic loaders. We offer economical and effective solutions which will convince you of the quality of our service. Special tools and tailor-made attachments are devised and developed in our own design department. We are looking forward to be your reliable partner.
Ihr Markus Hesse und Team
table of contents
Specific Weights page 6
court- and skId-skeer loader Attachments page 7–17
Manure Fork page 7
Rubber Blade, Bale Fork, Bale Grapple, Pallet Fork, High Dump Bucket page 8– 9
Light Bucket, SMART PUSH Light Bucket, Dirt Bucket, Heavy Duty Bucket page 10–11
Multipurpose Bucket 4 in 1, Bucket With Hydr. Downholder, Grapple Bucket, Silage Bucket page 12–13
Silage Bucket, SMART PUSH Silage Bucket, Manure Fork With Hydraulic Downholder,
Silage Fork With Grapple page 14–15
Crane Hook, Snow Blades, Sweeper page 16–17
frontloader Attachments page 18–38
Manure Forks page 18–19
Green Forage Fork, Rubber Blade, Bale Fork, Big Bale Fork page 20–21
Bale Grapple, Square Bale Grapple, Bale Fork Transport, Maize Pushing Blade,
Pallet Fork page 22–23
Pallet Fork, High Dump Bucket, Light Bucket page 24–25
SMART PUSH Light Buckets, Dirt Buckets page 26–27
Heavy Duty Bucket, Multipurpose Bucket 4 in 1, Potatoe Bucket, Silagecutter page 28–29
Bulky Goods Bucket, Bucket With Grapple, Grapple Bucket, Silage Bucket page 30–31
Silage Bucket, SMART PUSH Silage Buckets, Silage Fork With Grapple page 32–33
Silage Forks With Grapple, Brusk Pile Grab, Crane Hook, BIG-BAG Carrier page 34–35
Working Platforms, Snow Blades page 36–37
Rear Container, Sweeper page 38
WHeel- and telescoPIc loader Attachments page 39–64
Maize Pushing Blade page 39
Manure Forks, Green Forage Fork, Square Bale Grapple, Bale Grapple page 40–41
Bale Fork, Big Bale Fork, Pallet Fork page 42–43
Pallet Fork, Rubber Blade, Potatoe Bucket, Light Bucket page 44–45
SMART PUSH Light Buckets, Volume Light Buckets page 46–47
Volume Light Buckets, Big Volume Light Bucket, High Dump Bucket page 48–49
Dirt Bucket, Multipurpose Bucket 4 in 1, Heavy Duty Bucket, Load Bucket page 50–51
Silage Forks With Grapple, Brusk Pile Grab, Bulky Goods Bucket page 52–53
Bucket With Grapple, Silage Buckets page 54–55
Silage Buckets page 56–57
SMART PUSH Silage Buckets, Tool Carrier, Container Hook, Crane Hook page 58–59
Crane Hook, BIG-BAG Carrier, Working Platforms page 60–61
Silage Comb, Grain Pusher, Snow Blades page 62–63
Sweeper page 64
ACCESSORIES page 65–69
REPLACEMENTS AND WEAR PARTS page 70–77
FRO
NTL
OA
DER
2
00
CO
UR
T- /
Sk
ID-S
kEE
R L
OA
DER
1
00
WH
EEL-
AN
D T
ELES
CO
PIC
LO
AD
ER
30
0
6
SPECIFIC WEIGHTS FOR MATERIAL LOADED IN kG/CM
cereals kg/cm
wheat 820
rye 780
barley 640
oat 500
maize 800
rape 700
seed of grass 350
building materials kg/cm
lime 1200
grout 1750
cement 1400
adobe 1800
ground damped 2100
sand dried 1650
sand damped 2000
gravel 2000
silage kg/cm
grass 800
rye 920
maize 820
maize, CCM 850
clover 900
potatoes 1000
beet leafs 1000
straw and hay kg/cm
straw in bulk 60
straw in bale 140
hay in bulk 70
hay in bale 140
forage kg/cm
grass 350
clover 350
mineral fertiliser kg/cm
lime 1400
potash 1200
phosphate 1100
nitrate 1600
compound fertiliser 1100
carbamide 800
salpeter 1000
fuels kg/cm
logs 750
anthracite 900
briquette 1250
oak green 1000
spruce green 750
other kg/cm
snow loose 130
snow damp 550
organic fertiliser kg/cm
manure fresh 800
manure decomposed 1200
turf compressed 400
turf in bulk 70
turf damped 620
root crops kg/cm
potatoes 730
beets 700
7
manure forkfor courtloader/skid-skeer-loader
height 650 mm, tine length 800 mm, tines high value full material, thick material main tube with welded cones
width number of tines weight price
900 mm 5 93 kg 570,00 €
1000 mm 6 100 kg 580,00 €
1200 mm 7 120 kg 610,00 €
1300 mm 7 130 kg 680,00 €
1400 mm 8 140 kg 720,00 €
1500 mm 9 150 kg 780,00 €
extra charge for:
Euro-Quick-Coupler 49,00 €tine 1000 mm, each 28,00 €tine 1100 mm, each 31,00 €heavy duty tine 800 mm, each 48,00 €heavy duty tine 1000 mm, each 51,00 €
Type DG HL no. 101
ATTACHMENTS COURT- AND SkID-SkEER LOADERS 100
CO
UR
T- /
Sk
ID-S
kEE
R L
OA
DER
1
00
8
rubber bladefor courtloader/skid-skeer-loader
height 680 mm, depth 860 mm, stable steel substructure with tool holder, screwed rubber blade 460 × 40 mm reinforced with textilvariant: hydraulic slewing 50°, side inclination 40°
Type GS HL no. 117
width working width at 50° weight price
1500 mm (variant 980 mm) 165 (230) kg 700,00 €
1700 mm (variant 1100 mm) 180 (245) kg 765,00 €
2000 mm (variant 1300 mm) 200 (265) kg 830,00 €
2200 mm (variant 1420 mm) 210 (275) kg 1.000,00 €
2400 mm (variant 1550 mm) 220 (285) kg 1.060,00 €
2600 mm (variant 1680 mm) 230 (295) kg 1.130,00 €
extra charge for:
variant hydraulic slewing 50° 690,00 €Euro-Quick-Coupler 49,00 €kat I system for small size tractor 130,00 €
bale forkfor courtloader/skid-skeer-loader
height 600 mm, width 1120 mm, tine length 1000 mm, tines high value full material, thick material main tube with welded cones
number of tines capacity weight price
2 1200 kg 85 kg 585,00 €
3 1800 kg 95 kg 620,00 €
4 2400 kg 105 kg 670,00 €
extra charge for:
more width, per 100 mm 45,00 €more height, per 100 mm 42,00 €bracket, height 400 mm 165,00 €heavy duty tine 1000 mm, each 51,00 €extra tine in upper frame, each 79,00 €
Type BAS HL no. 102
9
bale Grapplefor courtloader/skid-skeer-loader
opening range 800 –1600 mm, one hydraulic cylinder
load capacity weight price
max. 1400 kg ca. 210 kg 1.295,00 €
extra charge for:
pressure limiting valve (220 bar) 170,00 €
Type RBZ HL no. 116
Type pLG HL no. 103
Pallet fork 1,5 t with tines
for courtloader/skid-skeer-loader
height 507 mm, with singly adjustable forged tines, capacity 1500 kg, LSP 500 mm, Type DIN
width tine length weight price
1000 mm 900 mm 162 kg 835,00 €
1000 mm 1000 mm 165 kg 865,00 €
1000 mm 1100 mm 170 kg 880,00 €
1000 mm 1200 mm 175 kg 895,00 €
1200 mm 900 mm 174 kg 925,00 €
1200 mm 1000 mm 179 kg 955,00 €
1200 mm 1100 mm 184 kg 970,00 €
1200 mm 1200 mm 189 kg 990,00 €
extra charge for:
more width, per 100 mm 75,00 €
Type HKS HL no. 121
High dump bucket loading goods up to 900 kg/cbm
for courtloader/skid-skeer-loader
height 770 mm, depth 920 mm, hardened cutting edge 150 × 16 mm, 500 HB, 2 hydraulic cylinders, made of fine grained steel
width volume weight price
1400 mm 560 l 350 kg 2.460,00 €
1600 mm 640 l 380 kg 2.575,00 €
1800 mm 720 l 410 kg 2.720,00 €
Extra charge for:
Euro-Quick-Coupler 49,00 € height side frame 255,00 €spill guard 150,00 €
CO
UR
T- /
Sk
ID-S
kEE
R L
OA
DER
1
00
10
Type LGS HL no. 105
light bucket loading goods up to 900 kg/cbm
for courtloader/skid-skeer-loader
height 840 mm, depth 890 mm, hardened cutting edge 110 × 12 mm, 400 HB, one inlying middle reinforcement for widths of 1400 mm
width volume weight price
900 mm 430 l 125 kg 695,00 €
1000 mm 485 l 137 kg 735,00 €
1100 mm 530 l 149 kg 760,00 €
1200 mm 595 l 161 kg 790,00 €
1300 mm 630 l 179 kg 825,00 €
1400 mm 690 l 195 kg 875,00 €
1500 mm 740 l 208 kg 950,00 €
1600 mm 795 l 220 kg 1.020,00 €
extra charge for:
Euro-Quick-Coupler 49,00 €spill guard 150,00 €middle reinforcement, each 135,00 €cutting edge 150 × 16 mm 500 HB, per m 105,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €
Type Sp LB S HL no. 123
SMART PUSH light bucket sfor courtloader/skid-skeer-loader
loading goods up to 900 kg/cbm
height 840 mm, depth 890 mm, hardened cutting edge 150 × 16 mm 500 HB, hydraulic back board, overload safety device,pressure limiting valve, made of fine grained steelpolyamid wear plate profil, height side frame, spill guard
width volume weight price
1200 mm 600 l 330 kg 2.150,00 €
1400 mm 690 l 385 kg 2.445,00 €
1600 mm 790 l 440 kg 2.780,00 €
1800 mm 890 l 495 kg 3.115,00 €
2000 mm 990 l 550 kg 3.450,00 €
extra charge for:
cutting edge 150 × 20 mm 500 HB, per m 125,00 €wear resistant sub-construction 290,00 €pressure holding valve (needed for special loaders) 180,00 €
11
Type SGS HL no. 106
Heavy duty bucket loading goods up to 2500 kg/cbm
for courtloader/skid-skeer-loader
height 850 mm, depth 800 mm, hardened cutting edge 150 × 16 mm, 500 HB, displayed with gravel tine, protection tube and crane hook
width volume weight price
1100 mm 580 l 170 kg 790,00 €
1200 mm 630 l 190 kg 800,00 €
1300 mm 690 l 210 kg 840,00 €
1400 mm 740 l 230 kg 880,00 €
1500 mm 760 l 250 kg 910,00 €
1600 mm 790 l 280 kg 940,00 €
extra charge for:
crane hook 2 t 140,00 €middle reinforcement, each 120,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €screwed gravel tine, each 55,00 €welded gravel tine, each 65,00 €protection tube 220,00 €
Type ES HL no. 104
dirt bucket loading goods up to 1600 kg/cbm
for courtloader/skid-skeer-loader
height 700 mm, depth 730 mm, hardened cutting edge 110 × 12 mm, 400 HB, one inlying middle reinforcement for widths of 1200 mm
width volume weight price
900 mm 310 l 100 kg 540,00 €
1000 mm 350 l 112 kg 585,00 €
1100 mm 385 l 124 kg 595,00 €
1200 mm 420 l 136 kg 720,00 €
1300 mm 460 l 154 kg 775,00 €
1400 mm 500 l 165 kg 855,00 €
1500 mm 525 l 178 kg 905,00 €
1600 mm 570 l 190 kg 950,00 €
Extra charge for:
Euro-Quick-Coupler 49,00 € spill guard 150,00 €middle reinforcement, each 95,00 €cutting edge 150 × 16 mm 500 HB, per m 105,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €protection tube 220,00 €screwed gravel tine, each 55,00 €welded gravel tine, heavy construction, each 65,00 €
CO
UR
T- /
Sk
ID-S
kEE
R L
OA
DER
1
00
12
width volume weight price
900 mm 430 l 135 kg 1.240,00 €
1000 mm 485 l 147 kg 1.290,00 €
1100 mm 530 l 159 kg 1.410,00 €
1200 mm 595 l 171 kg 1.510,00 €
1300 mm 630 l 194 kg 1.580,00 €
1400 mm 690 l 205 kg 1.720,00 €
1500 mm 740 l 218 kg 1.860,00 €
1600 mm 795 l 230 kg 1.950,00 €
Type SHN HL no. 107
bucket With Hydraulic downholder for courtloader/skid-skeer-loader
height 700 mm, depth 730 mm, opening width ca. 1200 mm, hardened cutting edge 110 × 12 mm 400 HB, one inlying middle reinforcement for widths of 1200 mm, nipper knife with one hydraulic cylinder, 2 hydraulic cylinders for widths of 1300 mm
Extra charge for:
Euro-Quick-Coupler 49,00 €middle reinforcement, each 120,00 €version with 2 hydraulic cylinders 310,00 €cutting edge 150 × 16 mm 500 HB, per m 105,00 €reinforced sickles, each 19,00 €
Type KLS HL no. 113
multipurpose bucket 4 in 1 loading goods up to 2500 kg/cbm
for courtloader/skid-skeer-loader
height 750 mm, depth 425 mm, hardened cutting edge 150 × 16 mm 500 HB, 2 hydraulic cylinders
width volume weight price
1200 mm 350 l 280 kg 2.600,00 €
1300 mm 380 l 300 kg 2.690,00 €
1400 mm 410 l 325 kg 2.790,00 €
1500 mm 440 l 350 kg 2.990,00 €
extra charge for:
crane hook 2 t 140,00 €pressure holding valve (needed for special loaders) 210,00 €screwed gravel tine, each 55,00 €welded gravel tine, each 65,00 €protection tube 220,00 €
13
Type pLK HL no. 119
Grapple bucket for courtloader/skid-skeer-loader
height 700 mm, depth 800 mm, hardened cutting edge 150 × 16 mm 500 HB, thick material main tube with welded sickles, 2 hydraulic cylinders, with removable sideparts screwed
Extra charge for:
Euro-Quick-Coupler 49,00 €cutting edge 150 × 20 mm 500 HB, per m 125,00 €wear resistant sub-construction 330,00 €reinforced sickles, each 19,00 €pressure holding valve (needed for special loaders) 210,00 €
width volume weight price
1200 mm 500 l 290 kg 1.980,00 €
1400 mm 590 l 340 kg 2.090,00 €
1600 mm 670 l 380 kg 2.290,00 €
Type SHN M HL no. 108
silage bucket conical
for courtloader/skid-skeer-loader
height 720 mm, depth 980 mm, opening width ca. 1470 mm,hardened cutting edge 150 × 16 mm 500 HB,one inlying middle reinforcement, thick material main tube with welded sickles, 2 hydraulic cylinders, one sickle all-side
width volume weight price
1400 mm 900 l 450 kg 2.450,00 €
1600 mm 1030 l 480 kg 2.690,00 €
extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €wear resistant sub-construction 330,00 €reinforced sickles, each 19,00 €pressure holding valve (needed for special loaders) 210,00 €
CO
UR
T- /
Sk
ID-S
kEE
R L
OA
DER
1
00
14
Type SBS M HL no. 109
silage bucket conical
for courtloader/skid-skeer-loader
height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 16 mm 500 HB, one inlying middle reinforcement, thick material main tube with welded cones, twist protected tines, 2 hydraulic cylinders, one sickle all-side
width volume weight price
1400 mm 900 l 450 kg 2.590,00 €
1600 mm 1030 l 480 kg 2.790,00 €
Extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €wear resistant sub-construction 330,00 €pressure holding valve (needed for special loaders) 210,00 €
Type Sp SB S HL no. 122
SMART PUSH silage bucket sfor courtloader/skid-skeer-loader
loading goods up to 900 kg/cbm
height 620 mm, depth 800 mm, variable mechanical back board, overload safety device, heavy upper looper with sickles (HB 500), open back board, made of fine grained steel, polyamid wear plate profil, hardened cutting edge 150×16 mm (HB 500)
width volume weight price
1200 mm 440 l 340 kg 2.850,00 €
1400 mm 520 l 390 kg 3.250,00 €
1600 mm 590 l 440 kg 3.650,00 €
1800 mm 660 l 490 kg 3.950,00 €
2000 mm 740 l 530 kg 4.350,00 €
Extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 120,00 €wear resistant sub-construction 290,00 €pressure holding valve (needed for special loaders) 180,00 €
15
Type DGHN HL no. 110
manure fork With Hydraulic downholder for courtloader/skid-skeer-loader
height 650 mm, opening width ca. 1200 mm, tine length 800 mm, thick material main tube with welded cones, tines high value full material, 1 hydraulic cylinders, for widths of 1300 mm 2 hydraulic cylinders
Extra charge for:
Euro-Quick-Coupler 49,00 €heavy duty tine 800 mm, each 48,00 €reinforced sickles, each 19,00 €
width number of tines weight price
900 mm 5 93 kg 1.220,00 €
1000 mm 6 100 kg 1.270,00 €
1200 mm 7 120 kg 1.370,00 €
1300 mm 7 130 kg 1.670,00 €
1400 mm 8 140 kg 1.810,00 €
1500 mm 9 150 kg 1.950,00 €
Type DUS HL no. 111
silage fork With Grapplefor courtloader/skid-skeer-loader
height 650 mm, opening width ca. 1200 mm, tine length 800 mm, thick material main tube with welded cones, high value full material, twist protected tines in the nipper knife, 1 hydraulic cylinder, for widths of 1300 mm 2 hydraulic cylinders
width number of tines weight price
900 mm 5 90 kg 1.280,00 €
1000 mm 6 97 kg 1.350,00 €
1200 mm 7 115 kg 1.460,00 €
1300 mm 7 125 kg 1.730,00 €
1400 mm 8 138 kg 1.890,00 €
1500 mm 9 148 kg 2.090,00 €
Extra charge for:
Euro-Quick-Coupler 49,00 €heavy duty tine 800 mm, each 48,00 €
CO
UR
T- /
Sk
ID-S
kEE
R L
OA
DER
1
00
16
Type LH HL no. 112
crane Hook forged swivel hook
for courtloader/skid-skeer-loader
working radius load capacity weight price
500 mm 1500 kg 130 kg 990,00 €
1000 mm 1500 kg 150 kg 1.080,00 €
1500 mm 1500 kg 175 kg 1.150,00 €
Type SSD HL no. 114
snow bladefor courtloader/skid-skeer-loader
height 730 mm, infinetely variable height adjustment, vullkollan lip, hydraulic side adjustment,level compensation, brand named wheels
width working width at 30˚ weight price
1300 mm 1100 mm 165 kg 1.980,00 €
1500 mm 1300 mm 175 kg 2.030,00 €
1800 mm 1600 mm 195 kg 2.080,00 €
2000 mm 1800 mm 215 kg 2.150,00 €
Extra charge for:
Euro-Quick-Coupler 49,00 €kat I system for small size tractor 175,00 €with lamps 160,00 €polyurethane blade, per m 195,00 €wear resistant strip 500 HB, per m 135,00 €
Type SSD V HL no. 120
snow bladefor courtloader/skid-skeer-loader
height 650–750 mm, hydraulic slewing 30°, torsion resistant corpus, vullkollan lip, level compensation, height adjustable brand named wheels
width working width at 30˚ weight price
1500 mm 1350 mm 210 kg 2.440,00 €
1800 mm 1650 mm 230 kg 2.600,00 €
2000 mm 1800 mm 250 kg 2.700,00 €
Extra charge for:
Euro-Quick-Coupler 49,00 €kat I system for small size tractor 175,00 €with lamps 160,00 €polyurethane blade, per m 195,00 €wear resistant strip 500 HB, per m 135,00 €
17
Type KB HL no. 115
sweeperfor courtloader/skid-skeer-loader
special main brush for snow, mechanical side adjustment, splash guard, hydraulic motor, brush ø 520 mm, height adjustable brandnamed wheels
width weight price
1500 mm 220 kg 2.780,00 €
1800 mm 245 kg 3.050,00 €
extra charge for:
hydraulic side adjustment 530,00 €hopper, mechanical emptying 510,00 €hopper, hydraulic emptying 980,00 €side brush 1.100,00 €side lamps 340,00 €
Type KB S HL no. 118
sweeperfor courtloader/skid-skeer-loader
height 380 mm, steel casing with tool holder, 8 sweeper rows of polypropylene, cleans quickly forward and backwards
width working width at 45° weight price
1300 mm ------ 100 kg 1.200,00 €
1500 mm 1100 mm 120 kg 1.330,00 €
1800 mm 1300 mm 140 kg 1.470,00 €
2000 mm 1450 mm 160 kg 1.620,00 €
Price reduction for:
tool holder for pallet forks -120,00 €
Extra charge for:
mechanical slewing 45° 450,00 €hydraulic slewing 45° 550,00 €
CO
UR
T- /
Sk
ID-S
kEE
R L
OA
DER
1
00
18
manure fork
with auto-latch
height 700 mm, tine length 800 mm, thick material main tube with welded cones, with standard latch-trestle
size width number of tines weight price
2 850 mm 5 79 kg 380,00 €
3 1020 mm 6 89 kg 415,00 €
3 1250 mm 7 110 kg 695,00 €
3 1450 mm 8 125 kg 710,00 €
3 1650 mm 9 128 kg 780,00 €
3 1850 mm 10 135 kg 855,00 €
3 2300 mm 12 170 kg 1.030,00 €
Extra charge for:
tine 1000 mm, each 30,00 €
Type DG KL no. 201
ATTACHMENTS FRONTLOADERS 200
19
manure fork with Euro-Quick-Coupler
height 750 mm, tine length 800 mm, thick material main tube with welded cones, reinforced gusset plates
width number of tines weight price
1300 mm 7 115 kg 670,00 €
1400 mm 8 130 kg 710,00 €
1600 mm 9 145 kg 785,00 €
1800 mm 10 160 kg 820,00 €
2000 mm 11 175 kg 880,00 €
2300 mm 12 200 kg 1.050,00 €
2500 mm 13 230 kg 1.210,00 €
Extra charge for:
tine 1000 mm, each 30,00 €tine 1100 mm, each 35,00 €heavy duty tine 800 mm, each 45,00 €heavy duty tine 1000 mm, each 55,00 €
Type DG EA no. 202
manure fork Xlwith Euro-Quick-Coupler
height 1250 mm, heavy duty tines length 800 mm,corpus made of fine grained steel, thick material main tube with welded cones, gusset plate, wear resistant sub-construction, reinforced Euro-Quick-Couplervertical extension mesh 500 mm
width number of tines weight price
1800 mm 10 190 kg 2.190,00 €
2000 mm 11 205 kg 2.380,00 €
2300 mm 12 230 kg 2.690,00 €
2500 mm 13 250 kg 2.890,00 €
Extra charge for:
heavy duty tine 1000 mm, each 55,00 €heavy duty tine 1250 mm, each 78,00 €
Type DG XL EA no. 229 FR
ON
TLO
AD
ER
20
0
20
Green forage forkwith Euro-Quick-Coupler
height 1400 mm with vertical extension mesh, tine length 800 mm, rounded corpus made of fine grained steel, wear resistant sub-construction, thick material main tube with welded cones, special heavy duty tines 55 × 1400 mm, 2 heavy duty tines outside, length 44 × 1250 mm,
width weight price
2500 mm 560 kg 5.760,00 €
2750 mm 625 kg 6.250,00 €
3000 mm 680 kg 6.490,00 €
3500 mm 795 kg 7.430,00 €
Extra charge for:
cat coupler 380,00 €more width, per 100 mm 265,00 €
Type GGG EA no. 227
rubber bladewith Euro-Quick-Coupler
height 680 mm, depth 860 mm, stable steel substructure with tool holder, screwed rubber blade 400 × 20 mm reinforced with textil,variant: hydraulic slewing 50°, side inclination 40°
Type GS EA no. 232
width working width at 50° weight price
2000 mm (variant 1300 mm) 200 (265) kg 920,00 €
2200 mm (variant 1420 mm) 210 (275) kg 1.010,00 €
2400 mm (variant 1550 mm) 220 (285) kg 1.140,00 €
2600 mm (variant 1680 mm) 230 (295) kg 1.210,00 €
3000 mm (variant 1930 mm) 250 (315) kg 1.350,00 €
Extra charge for:
variant hydraulic slewing 50° 690,00 € system kat II 150,00 €
21
bale forkwith Euro-Quick-Coupler
width 1120 mm, height 600 mm, tine length 1000 mm, thick material main tube with welded cones, tines high value full material, displayed with bracket
number of tines capacity weight price
2 1200 kg 85 kg 430,00 €
3 1800 kg 95 kg 480,00 €
4 2400 kg 105 kg 530,00 €
5 3000 kg 120 kg 600,00 €
Extra charge for:
NEW! Version with foldaway tines 395,00 €more width, per 100 mm 42,00 €more height, per 100 mm 38,00 €bracket, height 400 mm 180,00 €heavy duty tine 1000 mm, each 55,00 €heavy duty tine 1250 mm, each 78,00 €heavy duty tine 1400 mm, each 89,00 €extra tine in upper frame, each 70,00 €
Type BAS EA no. 203
NEW! available with foldaway tines
big bale fork with Euro-Quick-Coupler
corpus made of fine grained steel, wear resistant sub-construction,thick material main tube with welded cones, 4 heavy duty tines 44 × 1250 mm, 2 tines in upper frame 36 × 400 mm, ultimate load 4000 kg
Type GBAS EA no. 229
width height weight price
1800 mm 1800 mm 280 kg 1.750,00 €
1800 mm 2000 mm 290 kg 1.800,00 €
1800 mm 2500 mm 300 kg 1.950,00 €
2000 mm 1800 mm 290 kg 1.800,00 €
2000 mm 2000 mm 300 kg 1.850,00 €
2000 mm 2500 mm 320 kg 1.990,00 €
2500 mm 1800 mm 310 kg 1.950,00 €
2500 mm 2000 mm 320 kg 2.000,00 €
2500 mm 2500 mm 350 kg 2.140,00 €
Extra charge for:
more width, per 100 mm 45,00 €more height, per 100 mm 41,00 €heavy duty tine 1400 mm, each 89,00 €extra tine in upper frame, each 70,00 €
FRO
NTL
OA
DER
2
00
22
bale Grapplewith Euro-Quick-Coupler
opening range 800 – 1600 mm, 1 hydraulic cylinder
load capacity weight price
max. 1400 kg ca. 210 kg 1.290,00 €
Extra charge for:
pressure limiting valve (220 bar) 210,00 €
Type RBZ EA no. 205
square bale Grapplewith Euro-Quick-Coupler
for round bales and square bales up to 1000 kg
height 570 mm, width 1100 mm, depth 1380 mm,opening width 2100 mm, size of bales 700 – 2100 mm2 hydraulic cylinders
weight price
ca. 300 kg 1.690,00 €
Extra charge for:
pressure limiting valve (220 bar) 210,00 €
Type QBZ EA no. 238
bale fork transport with three-point-tail hydraulics CAT 1–2
weight 75 kg
Type BTG Dp no. 204 version price
mechanicly adjustable for different sizes 450,00 €
23
maize Pushing bladewith three-point-tail hydraulics cat 2-3
height ca. 1300 mm, blade made of fine-grained steel with bent edge and upper grid extension for better visibility, exchangeable HESSE adapter, special screwable rubber strip, blade with swiveling hydraulic side parts for widths of more than 3000 mm, adjustable pressure control valve
Type MSS KAT no. 223
width weight price
2500 mm 825 kg 3.950,00 €
2750 mm 875 kg 4.090,00 €
3000 mm 930 kg 4.290,00 €
4000 mm 1590 kg 8.290,00 €
5500 mm 1700 kg 9.290,00 €
Extra charge for:
additional HESSE adaptor for other agricultural machinery 885,00 €extension for CLAAS Xerion 970,00 €main tube with welded cones and heavy duty tines 1.080,00 €marker lights 495,00 €
Pallet fork without tines
with Euro-Quick-Coupler
for fork tines ISO FEM II, load capacity 2500 kg
Type pLG EA no. 206 width height weight price
1200 mm 407 mm 90 kg 410,00 €
Extra charge for:
more width, per 100 mm 75,00 €
FRO
NTL
OA
DER
2
00
24
Type pLG EA no. 207
Pallet fork 2,5 t with tines
with Euro-Quick-Coupler
with singly adjustable forged tines, FEM II, load capacity 2500 kg, LSP 500 mm, DIN height 507 mm
width tine length weight price
1200 mm 900 mm 162 kg 890,00 €
1200 mm 1000 mm 170 kg 920,00 €
1200 mm 1100 mm 180 kg 940,00 €
1200 mm 1200 mm 186 kg 970,00 €
1200 mm 1300 mm 200 kg 1.030,00 €
Extra charge for:
more width, per 100 mm 75,00 €
Type pLG EA 2.0 no. 228
Pallet fork 2 t with tines
with Euro-Quick-Coupler
with singly adjustable forged tines load capacity 2000 kg, LSP 500 mm, ISO FEM II B
width tine length weight price
1240 mm 1000 mm 140 kg 720,00 €
1240 mm 1200 mm 160 kg 770,00 €
Pallet fork 2 t with tines
with Euro-Quick-Coupler
with singly adjustable forged tines load capacity 2000 kg, LSP 500 mm, ISO FEM II B, 4 welded cones
width tine length weight price
1240 mm 1000 mm 140 kg 750,00 €
1240 mm 1200 mm 160 kg 795,00 € Type pLG BAS EA no. 219
Extra charge for:
more width, per 100 mm 75,00 €
Extra charge for:
fork tine, 1000 mm, each 36,00 €
25
Type LGS EA no. 210
light bucket conical, loading goods up to 900 kg/cbm
with Euro-Quick-Coupler
height 900 mm, depth 1030 mm, hardened cutting edge 150 × 16 mm 500 HB,inlying middle reinforcement for widths of 2200 mm
width volume weight price
1300 mm 760 l 240 kg 840,00 €
1500 mm 890 l 262 kg 905,00 €
1600 mm 950 l 275 kg 970,00 €
1800 mm 1080 l 310 kg 1.060,00 €
2000 mm 1210 l 330 kg 1.170,00 €
2200 mm 1340 l 350 kg 1.260,00 €
2500 mm 1530 l 400 kg 1.430,00 €
2800 mm 1720 l 430 kg 1.640,00 €
3000 mm 1850 l 450 kg 1.860,00 €
Extra charge for:
spill guard, ca. 1250 × 200 mm 175,00 €middle reinforcement, each 170,00 €cutting edge 150 × 20 mm 500 HB, per m 125,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €screwed polyurethan cutting edge, per m 230,00 €wear resistant sub-construction 395,00 €
Type HKS EA no. 235
High dump bucket loading goods up to 900 kg/cbm
with Euro-Quick-Coupler
height 1120 mm, depth 1320 mm, hardened cutting edge 150 × 16 mm 500 HB,2 hydraulic cylinders, made of fine grained steel
width volume weight price
1600 mm 640 l 370 kg 2.775,00 €
1800 mm 720 l 400 kg 2.920,00 €
2000 mm 800 l 430 kg 3.050,00 €
2200 mm 880 l 460 kg 3.220,00 €
2400 mm 960 l 490 kg 3.440,00 €
Extra charge for:
height side frame 250,00 €spill guard 175,00 €
FRO
NTL
OA
DER
2
00
26
Type Sp LB M EA no. 242
SMART PUSH light bucket mEuro-Quick-Coupler loading goods up to 900 kg/cbm
height 910 mm, depth 1200 mm, hydraulic back board, overload safety device, pressure limiting valve, made of fine grained steel, polyamid wear plate profil, height side frame, spill guard, hardened cutting edge 200 × 20 mm 500 HB
Type Sp LB S EA no. 241
SMART PUSH light bucket sEuro-Quick-Coupler loading goods up to 900 kg/cbm
height 840 mm, depth 890 mm, hydraulic back board, overload safety device, pressure limiting valve, made of fine grained steel, polyamid wear plate profil, height side frame, spill guard, hardened cutting edge 150 × 16 mm 500 HB
width volume weight price
1200 mm 600 l 330 kg 2.250,00 €
1400 mm 690 l 385 kg 2.545,00 €
1600 mm 790 l 440 kg 2.880,00 €
1800 mm 890 l 495 kg 3.215,00 €
2000 mm 990 l 550 kg 3.550,00 €
Extra charge for:
hardened cutting edge 150 × 20 mm 500 HB, per m 125,00 €wear resistant sub-construction 290,00 €pressure holding valve (needed for special loaders) 180,00 €
width volume weight price
2000 mm 1600 l 610 kg 3.750,00 €
2200 mm 1760 l 680 kg 4.050,00 €
2400 mm 1920 l 740 kg 4.395,00 €
2500 mm 2000 l 780 kg 4.590,00 €
2600 mm 2080 l 815 kg 4.780,00 €
2800 mm 2240 l 880 kg 5.150,00 €
3000 mm 2400 l 940 kg 5.500,00 €
extra charge for:
cutting edge with screwed knife 200 × 20 mm 500 HB, per m 220,00 €wear resistant sub-construction 340,00 €gaskets of back board for flowable goods e.g. rape and corn 350,00 €
27
Type ES KL no. 208
dirt bucket loading goods up to 1600 kg/cbm
with auto-latch
height 560 mm, depth 630 mm
Größe width volume weight price
2 850 mm 215 l 75 kg 330,00 €
3 1020 mm 260 l 90 kg 355,00 €
Type ES EA no. 209
dirt bucket conical, loading goods up to 1600 kg/cbm
with Euro-Quick-Coupler
height 720 mm, depth 980 mm, hardened cutting edge 150 × 16 mm 500 HBinlying middle reinforcement,2 inlying middle reinforcements for widths of 2200 mm
width volume weight price
1300 mm 620 l 195 kg 730,00 €
1500 mm 715 l 225 kg 760,00 €
1600 mm 760 l 240 kg 805,00 €
1800 mm 860 l 255 kg 840,00 €
2000 mm 965 l 275 kg 890,00 €
2200 mm 1065 l 305 kg 980,00 €
2500 mm 1215 l 345 kg 1.090,00 €
2800 mm 1370 l 375 kg 1.260,00 €
3000 mm 1470 l 395 kg 1.370,00 €
Extra charge for:
spill guard, ca. 1250 × 200 mm 175,00 €cutting edge 150 × 20 mm 500 HB, per m 125,00 €cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €screwed polyurethan cutting edge, per m 230,00 €screwed gravel tine, each 59,00 €welded gravel tine, each 69,00 €wear resistant sub-construction 395,00 €protection tube 245,00 €
Extra charge for:
cutting edge 150 × 16 mm 500 HB, per m 105,00 € screwed gravel tine, each 59,00 €welded gravel tine, each 69,00 €
FRO
NTL
OA
DER
2
00
28
Type KLS EA no. 222
multipurpose bucket 4 in 1 loading goods up to 2500 kg /cbm
with Euro-Quick-Coupler
height 750 mm, depth 425 mm, hardened cutting edge 150 × 20 mm 500 HB, 2 hydraulic cylinders
width volume weight price
1600 mm 570 l 375 kg 2.980,00 €
1800 mm 640 l 425 kg 3.290,00 €
2000 mm 720 l 475 kg 3.590,00 €
2200 mm 795 l 495 kg 3.930,00 €
2500 mm 900 l 540 kg 4.280,00 €
Extra charge for:
crane hook 3 t 195,00 €screwed gravel tine, each 59,00 €welded gravel tine, each 69,00 €protection tube 245,00 €
Type SGS EA no. 211
Heavy duty bucket loading goods up to 2500 kg/cbm
with Euro-Quick-Coupler
height 850 mm, depth 800 mm, hardened cutting edge 150 × 20 mm 500 HB, spill guard, inlying middle reinforcement for widths of 2000 mm
width volume weight price
1500 mm 740 l 250 kg 960,00 €
1600 mm 790 l 280 kg 980,00 €
1800 mm 910 l 300 kg 1.030,00 €
2000 mm 1010 l 340 kg 1.100,00 €
2200 mm 1120 l 380 kg 1.160,00 €
2400 mm 1220 l 420 kg 1.290,00 €
2600 mm 1320 l 455 kg 1.490,00 €
2800 mm 1430 l 490 kg 1.590,00 €
Extra charge for:
crane hook 3 t 195,00 €middle reinforcement, each 170,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €screwed gravel tine, each 59,00 €welded gravel tine, each 69,00 €wear resistant sub-construction 395,00 €protection tube 245,00 €
29
width volume weight price
1800 mm 900 l 300 kg 1.750,00 €
2000 mm 1000 l 315 kg 1.880,00 €
2200 mm 1100 l 330 kg 2.080,00 €
2400 mm 1200 l 345 kg 2.280,00 €
2600 mm 1300 l 360 kg 2.490,00 €
Type KTS EA no. 239
Potatoe bucket loading goods up to 1000 kg/cbm
with Euro-Quick-Coupler
height 910 mm, depth 1140 mm, hardened cutting edge 150 × 16 mm 500 HB, body off welded full round steel, rounded side panels, clear width between the round steels 55 mm
Extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 € height side frame 250,00 €spill guard 190,00 €
neW!
width volume weight price
1100 mm 630 l (Block 1050 × 800 × 750 mm) 430 kg 2.860,00 €
1300 mm 750 l (Block 1250 × 800 × 750 mm) 455 kg 3.110,00 €
1500 mm 870 l (Block 1450 × 800 × 750 mm) 475 kg 3.360,00 €
1700 mm 990 l (Block 1650 × 800 × 750 mm) 500 kg 3.610,00 € Type SSZ EA no. 240
silagecutter with Euro-Quick-Coupler
height 890 mm, depth 1010 mm, opening width ca. 850 mm, thick material main tube with welded cones,full material cranked tines 800 mm, 2 hydraulic cylinders
Extra charge for:
heavy duty tine 800 mm 45,-€
pressure limiting valve (220 bar) 210,-€
pressure holding valve (needed for special loaders) 250,-€
neW!
FRO
NTL
OA
DER
2
00
30
width volume weight price
1600 mm 1030 l 510 kg 3.620,00 €
1800 mm 1160 l 535 kg 3.730,00 €
2000 mm 1290 l 575 kg 3.910,00 €
2200 mm 1490 l 610 kg 4.080,00 €
2500 mm 1620 l 660 kg 4.240,00 €
Type ESG EA no. 220
bulky Goods bucket conical
with Euro-Quick-Coupler
height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 20 mm 500 HB, wear resistant sub-construction, inlying middle reinforcement, removable sideparts screwed, 2 inlying middle reinforcements for widths of 2200 mm,thick material main tube with reinforced graps, 2 hydraulic cylinders, adjustable pressure limiting valve
Extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 € cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €one more supporting point at the grapple 350,00 €oil flow divider 90 l/min 320,00 €
width volume weight price
1600 mm 1030 l 510 kg 3.250,00 €
1800 mm 1160 l 535 kg 3.360,00 €
2000 mm 1290 l 575 kg 3.540,00 €
2200 mm 1490 l 610 kg 3.710,00 €
2500 mm 1620 l 660 kg 3.880,00 €
Type RSS EA no. 221
bucket With Grapple conical
with Euro-Quick-Coupler
height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement, removable sideparts screwed, 2 inlying middle reinforcements for widths of 2200 mm,thick material main tube with welded cones and twist protected tines, 2 hydraulic cylinders
Extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 € cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €one more supporting point at the grapple 350,00 €oil flow divider 90 l/min 320,00 €wear resistant sub-construction 395,00 €
31
Type SHN M EA no. 212
silage bucket conical
with Euro-Quick-Coupler
height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 16 mm 500 HB, inlying middle reinforcement, 2 inlying middle reinforcements for widths of 2200 mm,thick material main tube with welded sickles, 1 sickle all-side, 2 hydraulic cylinders
extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €one more supporting point at the grapple 350,00 €oil flow divider 90 l/min 320,00 €wear resistant sub-construction 395,00 €reinforced sickles, each 25,00 €closed sideparts of the grapple 740,00 €
width volume weight price
1600 mm 1030 l 510 kg 2.530,00 €
1800 mm 1160 l 535 kg 2.830,00 €
2000 mm 1290 l 575 kg 2.940,00 €
2200 mm 1490 l 610 kg 3.190,00 €
2500 mm 1620 l 660 kg 3.300,00 €
2800 mm 1820 l 720 kg 3.600,00 €
Type pLK EA no. 236
Grapple bucket with Euro-Quick-Coupler
height 700 mm, depth 800 mm, hardened cutting edge 150 × 16 mm 500 HB, made of fine grained steel, thick material main tube with welded sickles, 2 hydraulic cylinders, removable sideparts screwed
Extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €wear resistant sub-construction 395,00 €reinforced sickles, each 25,00 €
width volume weight price
1600 mm 670 l 380 kg 2.490,00 €
1800 mm 750 l 420 kg 2.690,00 €
2000 mm 820 l 460 kg 2.830,00 €
2200 mm 890 l 500 kg 2.970,00 €
2500 mm 990 l 560 kg 3.140,00 €
FRO
NTL
OA
DER
2
00
32
Type SBS M EA no. 213
silage bucket conical
with Euro-Quick-Coupler
height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 16 mm 500 HB, inlying middle reinforcement, 2 inlying middle reinforcements for widths of 2200 mm,thick material main tube with welded cones and twist-protected tines2 hydraulic cylinders, 1 sickle all-side
width volume weight price
1600 mm 1030 l 510 kg 2.860,00 €
1800 mm 1160 l 535 kg 2.970,00 €
2000 mm 1290 l 575 kg 2.990,00 €
2200 mm 1490 l 610 kg 3.160,00 €
2500 mm 1620 l 660 kg 3.420,00 €
2800 mm 1820 l 720 kg 3.760,00 €
extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €one more supporting point at the grapple 350,00 €oil flow divider 90 l/min 320,00 €wear resistant sub-construction 395,00 €closed sideparts of the grapple 740,00 €
Type Sp SB S EA no. 243
SMART PUSH silage bucket sEuro-Quick-Coupler loading goods up to 900 kg/cbm
height 620 mm, depth 800 mm, variable mechanical back board, over-load safety device, heavy upper looper with sickles HB 500, open back board, made of fine grained steel, polyamid wear plate profil, hardened cutting edge 150 × 16 mm 500 HB
width volume weight price
1200 mm 440 l 340 kg 2.850,00 €
1400 mm 520 l 390 kg 3.250,00 €
1600 mm 590 l 440 kg 3.650,00 €
1800 mm 660 l 490 kg 3.950,00 €
2000 mm 740 l 530 kg 4.350,00 €
Extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 120,00 €wear resistant sub-construction 290,00 €pressure holding valve (needed for special loaders) 180,00 €
33
Type DGHN EA no. 214
silage fork With Grapplewith Euro-Quick-Coupler
height 750 mm, tine length 800 mm, opening width ca. 1200 mm, thick material main tube with welded cones, tines high value full material, 2 hydraulic cylinders
width number of tines weight price
1600 mm 9 365 kg 2.250,00 €
1800 mm 10 410 kg 2.350,00 €
2000 mm 11 450 kg 2.590,00 €
2300 mm 12 510 kg 2.840,00 €
2500 mm 13 580 kg 3.090,00 €
extra charge for:
heavy duty tine 800 mm, each 45,00 €reinforced sickle, each 25,00 €sickle outside, each 75,00 €oil flow divider 90 l/min 320,00 €
width volume weight price
1400 mm 730 l 490 kg 3.950,00 €
1600 mm 840 l 530 kg 4.250,00 €
1800 mm 940 l 580 kg 4.650,00 €
2000 mm 1040 l 620 kg 5.050,00 €
2200 mm 1155 l 680 kg 5.450,00 €
2300 mm 1210 l 710 kg 5.650,00 €
2500 mm 1310 l 775 kg 5.950,00 €
2600 mm 1365 l 800 kg 6.150,00 €
2800 mm 1470 l 865 kg 6.350,00 €
extra charge for:
cutting edge 200×20mm 500 HB, per m 120,00 €cutting edge with screwed knife 200×20mm 500 HB, per m 220,00 €one more supporting point at the grapple 295,00 €wear resistant sub-construction 340,00 €reinforced sickle, each 20,00 €pressure limiting valve (220 bar) 150,00 €pressure holding valve (needed for special loaders) 180,00 €
Type Sp SB M EA no. 244
SMART PUSH silage bucket m Euro-Quick-Coupler loading goods up to 900 kg/cbm
height 700 mm, depth 940 mm, 4 supporting points at the grapple for widths of 2800 mm, variable mechanical back board, overload safety device, heavy upper looper with sickles (HB 500), open back board, made of fine grained steel, polyamid wear plate profil, hardened cutting edge 150 × 16 mm 500 HB
FRO
NTL
OA
DER
2
00
34
Type DUS EA no. 215
silage fork With Grapple with Euro-Quick-Coupler
height 750 mm, tine length 800 mm, opening width ca. 1500 mm, thick material main tube with welded cones, tines high value full material, twist-protected tines in the nipper knife, 2 hydraulic cylinders
width number of tines weight price
1600 mm 9 395 kg 2.400,00 €
1800 mm 10 440 kg 2.500,00 €
2000 mm 11 495 kg 2.740,00 €
2300 mm 12 550 kg 2.990,00 €
2500 mm 13 585 kg 3.290,00 €
Type DUS SLZ EA no. 215 aFrachtkostenanteil innerhalb Deutschlands 140,00 €
silage fork With Grapple with heavy duty tines
with Euro-Quick-Coupler
height 750 mm, tine length 800 mm, opening width ca. 1500 mm, thick material main tube with welded cones, heavy duty tines, twist-protected tines in the nipper knife, 2 hydraulic cylinders
width number of tines weight price
1600 mm 9 415 kg 2.740,00 €
1800 mm 10 460 kg 2.890,00 €
2000 mm 11 515 kg 2.990,00 €
2300 mm 12 570 kg 3.170,00 €
2500 mm 13 630 kg 3.450,00 €
extra charge for:
oil flow divider 90 l/min 320,00 €tine outside, 600 mm, each 89,00 €
extra charge for:
oil flow divider 90 l/min 320,00 €tine outside 600 mm, each 89,00 €
35
Type LH EA no. 216
crane hook forged swivel hook
with Euro-Quick-Coupler
load capacity working radius weight price
1500 kg 500 mm 130 kg 1.090,00 €
1500 kg 1000 mm 150 kg 1.190,00 €
1500 kg 1500 mm 180 kg 1.290,00 €
1500 kg 2000 mm 200 kg 1.390,00 €
2500 kg 500 mm 150 kg 1.290,00 €
2500 kg 1000 mm 170 kg 1.400,00 €
2500 kg 1500 mm 200 kg 1.500,00 €
2500 kg 2000 mm 220 kg 1.590,00 €
Type RSG EA no. 230
brusk Pile Grabwith Euro-Quick-Coupler
height 750 mm, tine length 800 mm, opening width ca. 1200 mm, corpus made of fine grained steel, thick material main tube with welded cones, heavy duty tines, wear resistant sub-construction, reinforced sickles on the grapple, 2 hydraulic cylinders
width number of tines weight price
1600 mm 9 395 kg 2.940,00 €
1800 mm 10 440 kg 3.090,00 €
2000 mm 11 480 kg 3.210,00 €
2300 mm 12 540 kg 3.370,00 €
2500 mm 13 610 kg 3.650,00 €
Extra charge for:
oil flow divider 90 l/min 320,00 €
bIG-baG carrierwith Euro-Quick-Coupler
mechanicly adjustable in 3 heights 1200 – 1800 mm,crane hook in three-steps adjustable
load capacity working radius weight price
1000 kg 1000 mm 165 kg 1.080,00 €
1500 kg 1000 mm 185 kg 1.190,00 € Type BBT EA no. 217
FRO
NTL
OA
DER
2
00
36
Type AK EA no. 218
Working Platformwith Euro-Quick-Coupler
size ca. 1154 × 1224 mm, lifting force 300 kg,interlocking divice for fork tines,selflocking door 600 × 900 mm,non-slip base, fold-away safety guard
lifting force weight price
300 kg 170 kg 1.350,00 €
Type AK II EA no. 226
Working Platformwith Euro-Quick-Coupler
size ca. 1100 × 2000 mm, lifting force 300 kg,interlocking divice for fork tines,selflocking door 600 × 900 mm,non-slip base, fold-away safety guard,
lifting force weight price
300 kg 260 kg 2.750,00 €
extra charge for:
wooden edge guard 240,00 €hot-dip galvanised 550,00 €height up 1000 mm 750,00 €
extra charge for:
wooden edge guard 380,00 €hot-dip galvanised 750,00 €
37
Type SSD V EA no. 234
snow bladewith Euro-Quick-Coupler
height 650–750 mm, height 830–970 mm for width of 2200 mm, vullkollan lip, torsion resistant corpus, hydraulic slewing 30°, level compensation, height adjustable brand named wheels
width working width at 30˚ weight price
1500 mm 1350 mm 210 kg 2.790,00 €
1800 mm 1650 mm 230 kg 2.990,00 €
2000 mm 1800 mm 250 kg 3.050,00 €
2200 mm 1950 mm 350 kg 3.660,00 €
2600 mm 2280 mm 370 kg 3.840,00 €
2900 mm 2550 mm 400 kg 4.190,00 €
extra charge for:
kat I system for small size tractor 195,00 €with lamps 180,00 €polyurethane blade, per m 250,00 €wear resistant blade 500 HB, per m 150,00 €
Type SSD EA no. 224
width working width at 30˚ weight price
1500 mm 1300 mm 175 kg 2.350,00 €
1800 mm 1600 mm 195 kg 2.390,00 €
2000 mm 1800 mm 215 kg 2.450,00 €
2200 mm 1920 mm 330 kg 3.080,00 €
2600 mm 2280 mm 340 kg 4.220,00 €
2900 mm 2550 mm 360 kg 3.390,00 €
extra charge for:
three-point-tail hydraulics cat 2–3 195,00 €with lamps 180,00 €polyurethane blade, per m 250,00 €wear resistant blade 500 HB, per m 150,00 €
snow bladewith Euro-Quick-Coupler
height 730 mm, 880 mm height for width of 2200 mm,vullkollan lip, torsion resistant corpus,hydraulic slewing 30°, level compensation,height adjustable brand named wheels
FRO
NTL
OA
DER
2
00
38
rear container with kAT 1 and 2 loader
height 960 –600/400 mm, torsion-resistant hollowmechanically tiltable, removable side,hardened cutting edge, Pulverbeschichtung
kAT I – II for tractors and compact tractor
width weight price
1200 mm 120 kg 720,00 €
1500 mm 140 kg 780,00 €
1800 mm 160 kg 890,00 €
Type HCT Dp no. 237
width weight price
1500 mm 309 kg 3.350,00 €
1800 mm 335 kg 3.580,00 €
2300 mm 370 kg 3.900,00 €
Extra charge for:
three-point-tail hydraulics cat 2–3 480,00 €hydraulic side adjustment 580,00 €hopper, mechanical emptying 980,00 €
width arbeitsbreite bei 45° weight price
2400 mm 1700 mm 210 kg 1.990,00 €
2800 mm 2000 mm 240 kg 2.230,00 €
3200 mm 2280 mm 280 kg 2.540,00 €
hopper, hydraulic emptying 1.550,00 €water spray system 1.450,00 €side brush 1.250,00 €side lamps 390,00 €
Type KB EA no. 225
sweeperwith Euro-Quick-Coupler
special main brush for snow, ø 520 mm, hydraulic motor
Type KB S EA no. 233
sweeperwith Euro-Quick-Coupler
height 380 mm, steel casing with tool holder, 8 sweeper rows of polypropylene, cleans quickly forward and backwards
Price reduction for:
tool holder for pallet forks -120,00 €
Extra charge for:
mechanical slewing 45° 750,00 €hydraulic slewing 45° 850,00 €
39
maize Pushing bladefor wheel- or telescopic loader
height ca. 1300 mm, blade made of fire grained steel with bent edge and upper grid extension for better visibility, exchangeable HESSE adapter, special screwable rubber strip, blade with swiveling hydraulic side parts for widths of more than 3000 mm, adjustable pressure control valve
Type MSS RL/TL no. 328
width weight price
2500 mm 855 kg 4.450,00 €
2750 mm 900 kg 4.600,00 €
3000 mm 985 kg 4.830,00 €
4000 mm 1650 kg 8.790,00 €
5500 mm 1780 kg 9.550,00 €
Extra charge for:
additional HESSE adaptor for other agricultural machinery 970,00 €extended mounting 500 mm for better visibility 980,00 €main tube with welded cones and heavy duty tines 1.080,00 €marker lights 480,00 €
ATTACHMENTS WHEEL- AND TELESCOPIC LOADERS 300
WH
EEL-
AN
D T
ELES
CO
PIC
LO
AD
ER
30
0
40
manure fork for wheel- or telescopic loader
height 780 mm, tine length 1000 mm, thick material main tube with welded cones, wear resistant sub-construction, tines high value full material
width number of tines weight price
1600 mm 9 250 kg 1.390,00 €
1800 mm 10 280 kg 1.480,00 €
2000 mm 11 310 kg 1.550,00 €
2300 mm 12 340 kg 1.720,00 €
2500 mm 13 370 kg 1.820,00 €
2800 mm 14 410 kg 2.290,00 €
3000 mm 15 460 kg 2.350,00 €
Type DG RL/TL no. 301
Extra charge for:
heavy duty tine 1000 mm incl. reinforcement bushes, each 65,00 €heavy duty tine 1250 mm incl. reinforcement bushes, each 90,00 €heavy duty tine 1400 mm incl. reinforcement bushes, each 105,00 €
manure fork Xl with vertical extension
for wheel- or telescopic loader
height 1280 mm, tine length 1000 mm, vertical extension mesh 500 mm,corpus made of fine grained steel, thick material main tube with welded cones, heavy duty tines, one tine all-side length 800 mm, gusset plate, wear resistant sub-construction
width number of tines weight price
1800 mm 10 330 kg 2.490,00 €
2000 mm 11 360 kg 2.680,00 €
2300 mm 12 390 kg 2.990,00 €
2500 mm 13 420 kg 3.190,00 €
2800 mm 14 470 kg 3.390,00 €
3000 mm 15 530 kg 3.590,00 €
Type DG XL RL/TL no. 339
Extra charge for:
heavy duty tine 1250 mm incl. reinforcement bushes, each 90,00 €
41
bale Grapplefor wheel- or telescopic loader
opening range 800–1600 mm, with hydraulic cylinders
capacity weight price
max. 1400 kg ca. 270 kg 1.990,00 € Type RBZ RL/TL no. 303
Extra charge for:
pressure limiting valve (220 bar) 210,00 €
width weight price
2500 mm 560 kg 5.590,00 €
2750 mm 625 kg 5.925,00 €
3000 mm 680 kg 6.450,00 €
3500 mm 795 kg 7.385,00 €
4000 mm 910 kg 8.290,00 €
Type GGG RL/TL no. 333
Green forage forkfor wheel- or telescopic loader
height 1400 mm, special heavy duty tines 55 × 1400 mm, rounded corpus made of fine grained steel, thick material main tube with welded cones, height 1400 mm with vertical extension mesh, wear resistant sub-construction, 2 heavy duty tines outside 44 × 1250 mm
Extra charge for:
more width, je 100 mm 290,00 €
Type QBZ RL/TL no. 348
square bale Grapplefor wheel- or telescopic loader
height 570 mm, width 1100 mm, depth 1380 mm,for square bales and round bales up to 1000 kgopening width 2100 mm, bale size 700 – 2100 mm2 hydraulic cylinders
weight price
ca. 350 kg 2.290,00 €
Extra charge for:
pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €
WH
EEL-
AN
D T
ELES
CO
PIC
LO
AD
ER
30
0
42
bale fork NEW! optional adjustable in height hydraulic
for wheel- or telescopic loader
width 1250 mm, height 1300 mm, tine length 1000 mm, thick material main tube with welded cones, wear resistant sub-construction,
displayed with adjustable height hydraulic and foldaway tines
number of tines load capacity weight price
2 1200 kg 190 kg 930,00 €
3 1800 kg 195 kg 980,00 €
4 2400 kg 200 kg 1.030,00 €
5 3000 kg 205 kg 1.080,00 € Type BAS RL/TL no. 302
big bale fork for wheel- or telescopic loader
4 heavy duty tines 44 × 1250 mm, corpus made of fine grained steel, wear resistant sub-construction, thick material main tube with welded cones, 2 tines in upper frame 36 × 400 mm, ultimate load max. 4000 kg
Type GBAS RL/TL no. 334
width height weight price
1800 mm 1800 mm 280 kg 1.870,00 €
1800 mm 2000 mm 290 kg 1.920,00 €
1800 mm 2500 mm 300 kg 2.070,00 €
2000 mm 1800 mm 290 kg 1.920,00 €
2000 mm 2000 mm 300 kg 1.970,00 €
2000 mm 2500 mm 320 kg 2.110,00 €
2500 mm 1800 mm 310 kg 2.070,00 €
2500 mm 2000 mm 320 kg 2.120,00 €
2500 mm 2500 mm 350 kg 2.260,00 €
Extra charge for:
NEW! foldaway tines 390,00 €NEW! adjustable in height hydraulic 750,00 €more width, per 100 mm 52,00 €more height, per 100 mm 45,00 €bracket, height 700 mm 350,00 €heavy duty tine 1000 mm, each 59,00 € heavy duty tine 1250 mm, each 79,00 €heavy duty tine 1400 mm, each 85,00 €extra tine in upper frame, each 65,00 € hydraulic push off wall with pressure limiting value 1.180,00 €
Extra charge for:
more width, per 100 mm 49,00 €more height, per 100 mm 45,00 €heavy duty tine 1400 mm, each 92,00 €extra tine in upper frame, each 75,00 €
43
Type pLG 2.5 t RL/TL no. 304
Pallet fork 2,5 t with tines
for wheel- or telescopic loader
with singly adjustable forged tines, load capacity 2500 kg, LSP 500 mm, ISO FEM II B
width tine length weight price
1200 mm 900 mm 216 kg 1.290,00 €
1200 mm 1000 mm 222 kg 1.340,00 €
1200 mm 1100 mm 228 kg 1.370,00 €
1200 mm 1200 mm 234 kg 1.390,00 €
Type pLG 3.5 t RL/TL no. 304 a
Pallet fork 3,5 t with tines
for wheel- or telescopic loader
with singly adjustable forged tines, load capacity 3500 kg, LSP 500 mm, ISO FEM III B
width tine length weight price
1200 mm 900 mm 282 kg 1.490,00 €
1200 mm 1000 mm 288 kg 1.520,00 €
1200 mm 1100 mm 292 kg 1.590,00 €
1200 mm 1200 mm 297 kg 1.630,00 €
Type pLG 4.5 t RL/TL no. 304 b
Pallet fork 4,5 t with tines
for wheel- or telescopic loader
with singly adjustable forged tines, load capacity 4500 kg, LSP 500 mm, ISO FEM III B
width tine length weight price
1200 mm 1000 mm 300 kg 1.590,00 €
1200 mm 1100 mm 310 kg 1.650,00 €
1200 mm 1200 mm 320 kg 1.700,00 €
1200 mm 1500 mm 390 kg 2.050,00 €
Extra charge for:
more width, per 100 mm 85,00 €
Extra charge for:
more width, per 100 mm 95,00 €
Extra charge for:
more width, per 100 mm 95,00 €
WH
EEL-
AN
D T
ELES
CO
PIC
LO
AD
ER
30
0
44
Type pLG 5.0 t RL/TL no. 304 c
Pallet fork 5 t with tines
for wheel- or telescopic loader
with singly adjustable forged tines, load capacity 5000 kg, LSP 500 mm, ISO FEM III B
width tine length weight price
1200 mm 1000 mm 330 kg 1.890,00 €
1200 mm 1100 mm 340 kg 1.990,00 €
1200 mm 1200 mm 350 kg 2.050,00 €
1200 mm 1500 mm 420 kg 2.150,00 €
Type pLG 6.0 t RL/TL no. 304 d
Pallet fork 6 t with tines
for wheel- or telescopic loader
with singly adjustable forged tines, load capacity 6000 kg, LSP 500 mm, ISO FEM IV B
width tine length weight price
1400 mm 1200 mm 450 kg 2.320,00 €
1400 mm 1300 mm 460 kg 2.450,00 €
1400 mm 1500 mm 490 kg 2.590,00 €
Extra charge for:
more width, per 100 mm 160,00 €
Extra charge for:
more width, per 100 mm 160,00 €
rubber bladefor wheel- or telescopic loader
height 680 mm, depth 860 mm, stable steel substructure with tool holder, screwed rubber blade 460 × 40 mm reinforced with textil variant: hydraulic slewing 50°, side inclination 40°
Type GS RL/TL no. 340
width working width at 50° weight price
2000 mm (variant 1300 mm) 230 (295) kg 1.170,00 €
2200 mm (variant 1420 mm) 240 (305) kg 1.260,00 €
2400 mm (variant 1550 mm) 250 (315) kg 1.390,00 €
2600 mm (variant 1680 mm) 260 (325) kg 1.460,00 €
3000 mm (variant 1930 mm) 280 (345) kg 1.600,00 €
Extra charge for:
variant hydraulic slewing 50° 690,00 €
45
width volume weight price
1800 mm 900 l 340 kg 2.050,00 €
2000 mm 1000 l 355 kg 2.180,00 €
2200 mm 1100 l 370 kg 2.380,00 €
2400 mm 1200 l 385 kg 2.580,00 €
2600 mm 1300 l 400 kg 2.790,00 €
2800 mm 1400 l 415 kg 2.990,00 €
Type KTS RL/TL no. 349
Potatoe bucket loading goods up to 1000 kg/cbm
for wheel- or telescopic loader
height 910 mm, depth 1140 mm, hardened cutting edge 150 × 20 mm 500 HB, corpus of welded full round steel, rounded side panels, clear width between the round steels 55mm
Extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 € height side frame 250,00 €spill guard (complete width) 190,00 €
neW!
Type LGS RL/TL no. 306
light bucket loading goods up to 900 kg/cbm
for wheel- or telescopic loader
height 970 mm, depth 1170 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement, 2 inlying middle reinforcements for widths of 2200 mm, loss of reinforcement: with hardenend cutting edge 200 × 20 mm and wear resistant sub-construction
width volume weight price
1600 mm 1280 l 380 kg 1.450,00 €
1800 mm 1440 l 395 kg 1.550,00 €
2000 mm 1610 l 410 kg 1.595,00 €
2200 mm 1770 l 465 kg 1.670,00 €
2500 mm 2030 l 485 kg 2.150,00 €
2600 mm 2110 l 500 kg 2.230,00 €
2800 mm 2280 l 520 kg 2.300,00 €
3000 mm 2440 l 545 kg 2.490,00 €
extra charge for:
height side frame 250,00 €spill guard 175,00 €cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €screwed polyurethan cutting edge, per m 230,00 €wear resistant sub-construction 395,00 €
WH
EEL-
AN
D T
ELES
CO
PIC
LO
AD
ER
30
0
46
Type Sp LB M RL/TL no. 350
SMART PUSH light bucket mfor wheel- or telescopic loader loading goods up to 900 kg/cbm
height 910 mm, depth 1200 mm, variable mechanical back board, overload safety device, pressure limiting valve (220 bar), made of fine grained steel, polyamid wear plate profil, height side frame, spill guard, hardened cutting edge 200 × 20 mm 500 HB
width volume weight price
2000 mm 1600 l 610 kg 3.750,00 €
2200 mm 1760 l 680 kg 4.050,00 €
2400 mm 1920 l 740 kg 4.395,00 €
2500 mm 2000 l 780 kg 4.590,00 €
2600 mm 2080 l 815 kg 4.780,00 €
2800 mm 2240 l 880 kg 5.150,00 €
3000 mm 2400 l 940 kg 5.500,00 €
extra charge for:
cutting edge with screwed knife 200 × 20 mm 500 HB, per m 220,00 €wear resistant sub-construction 340,00 €gaskets of back board for flowable goods e.g. rape and corn 350,00 €
Type Sp LB L RL/TL no. 351
SMART PUSH light bucket lfor wheel- or telescopic loader loading goods up to 900 kg/cbm
height 1390 mm, depth 1360 mm, variable mechanical back board, overload safety device, pressure limiting valve (220 bar), made of fine grained steel, polyamid wear plate profil, height side frame, spill guard, hardened cutting edge 250 × 25 mm 500 HB
width volume weight price
2400 mm 3260 l 1140 kg 6.220,00 €
2500 mm 3400 l 1190 kg 6.390,00 €
2600 mm 3530 l 1240 kg 6.550,00 €
2800 mm 3800 l 1340 kg 6.950,00 €
3000 mm 4100 l 1440 kg 7.490,00 €
extra charge for:
cutting edge with screwed knife 250 × 25 mm 500 HB, per 175,00 €cutting edge 300 × 30 mm 500 HB, per m 140,00 €cutting edge with screwed knife 300 × 30 mm 500 HB, per m 320,00 €wear resistant sub-construction 340,00 €gaskets of back board for flowable goods e.g. rape and corn 350,00 €
47
Type VLS M RL/TL no. 354
Volume light bucket m loading goods up to 1600 kg/cbm
for wheel- or telescopic loader
height 1090 mm, depth 1150 mm, hardened cutting edge 200 × 20 mm 500 HB, without inlying middle reinforcement, made of fine grained steel
width volume weight price
2000 mm 2160 l 650 kg 2.390,00 €
2200 mm 2380 l 670 kg 2.600,00 €
2400 mm 2590 l 690 kg 2.700,00 €
2500 mm 2700 l 715 kg 2.800,00 €
2600 mm 2800 l 725 kg 2.990,00 €
2800 mm 3020 l 780 kg 3.250,00 €
3000 mm 3200 l 850 kg 3.550,00 €
extra charge for:
height side frame 250,00 €spill guard 175,00 €screwed knife 200 x 20 mm 500 HB, per m 145,00 €cutting edge 300 × 30 mm 500 HB, per m 160,00 €cutting edge with screwed knife 250 x 25 mm 500 HB, per m 350,00 €screwed polyurethan cutting edge, per m 230,00 €wear resistant sub-construction 395,00 €
Type VLS RL/TL no. 307
Volume light bucket loading goods up to 900 kg/cbm
for wheel- or telescopic loader
height 1100 mm, depth 1400 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement, 2 inlying middle reinforcements for widths of 2200 mm, loss of reinforcement: with hardenend cutting edge 200 × 20 mm and wear resistant sub-construction
width volume weight price
1800 mm 1880 l 480 kg 1.980,00 €
2000 mm 2100 l 507 kg 2.090,00 €
2200 mm 2320 l 572 kg 2.300,00 €
2400 mm 2540 l 598 kg 2.400,00 €
2500 mm 2625 l 613 kg 2.500,00 €
2600 mm 2760 l 625 kg 2.690,00 €
2800 mm 2940 l 680 kg 2.950,00 €
3000 mm 3150 l 730 kg 3.250,00 €
extra charge for:
height side frame 250,00 €spill guard 175,00 €cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge 300 × 30 mm 500 HB, per m 160,00 €
cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €screwed polyurethan cutting edge, per m 230,00 €wear resistant sub-construction 395,00 €
WH
EEL-
AN
D T
ELES
CO
PIC
LO
AD
ER
30
0
48
Type VLS L RL/TL no. 341
Volume light bucket l loading goods up to 1600 kg/cbm
for wheel- or telescopic loader
height 1500 mm, depth 1480 mm, hardened cutting edge 250 × 25 mm 500 HB, without inlying middle reinforcement, made of fine grained steel
width volume weight price
2000 mm 2700 l 880 kg 4.190,00 €
2200 mm 3000 l 940 kg 4.290,00 €
2400 mm 3260 l 980 kg 4.400,00 €
2500 mm 3400 l 1000 kg 4.450,00 €
2600 mm 3550 l 1025 kg 4.590,00 €
2800 mm 3840 l 1070 kg 4.750,00 €
3000 mm 4130 l 1100 kg 4.990,00 €
extra charge for:
height side frame 330,00 €spill guard, ca. 1250 × 200 mm 295,00 €screwed knife 250 × 25 mm 500 HB, per m 225,00 €cutting edge 300 × 30 mm 500 HB, per m 160,00 €cutting edge with screwed knife 300 × 30 mm 500 HB, per m 360,00 €screwed polyurethan cutting edge, per m 255,00 €wear resistant sub-construction 425,00 €
Type VLS XL RL/TL no. 308
Volume light bucket Xl loading goods up to 900 kg/cbm
for wheel- or telescopic loader
height 1300 mm, depth 1750 mm, hardened cutting edge 300 × 30 mm 500 HB, 2 inlying middle reinforcements
width volume weight price
2500 mm 3470 l 980 kg 4.395,00 €
2800 mm 3900 l 1045 kg 4.695,00 €
3000 mm 4190 l 1090 kg 4.895,00 €
extra charge for:
height side frame 330,00 €spill guard 295,00 €screwed knife 300 × 30 mm 500 HB, per m 245,00 €wear resistant sub-construction 495,00 €
49
Type GVS RL/TL no. 336
big Volume light bucket loading goods up to 1600 kg/cbm
for wheel- or telescopic loader
height 1660 mm, depth 1590 mm, hardened cutting edge 300 × 30 mm 500 HB, without inlying middle reinforcements, made of fine grained steel
width volume weight price
2500 mm 4350 l 1350 kg 5.390,00 €
2800 mm 4870 l 1480 kg 5.890,00 €
3000 mm 5230 l 1590 kg 6.290,00 €
extra charge for:
height side frame 350,00 €screwed knife 300 × 30 mm 500 HB, per m 245,00 €wear resistant sub-construction 495,00 €
Type HKS RL/TL no. 345
High dump bucket loading goods up to 900 kg/cbm
for wheel- or telescopic loader
height 1120 mm, depth 1320 mm, hardened cutting edge 200 × 20 mm 500 HB,2 hydraulic cylinders, made of fine grained steel
width volume weight price
1800 mm 1440 l 780 kg 3.420,00 €
2000 mm 1600 l 800 kg 3.570,00 €
2200 mm 1760 l 820 kg 3.725,00 €
2400 mm 1920 l 875 kg 3.990,00 €
2600 mm 2080 l 950 kg 4.290,00 €
Extra charge for:
height side frame 350,00 €spill guard 195,00 €
WH
EEL-
AN
D T
ELES
CO
PIC
LO
AD
ER
30
0
50
Type KLS RL/TL no. 326
multipurpose bucket 4 in 1 loading goods up to 2500 kg/cbm
for wheel- or telescopic loader
height 750 mm, depth 425 mm, hardened cutting edge 150 × 20 mm 500 HB, 2 hydraulic cylinders
width volume weight price
1600 mm 570 l 400 kg 2.985,00 €
1800 mm 640 l 450 kg 3.340,00 €
2000 mm 720 l 475 kg 3.620,00 €
2200 mm 795 l 500 kg 3.950,00 €
2500 mm 900 l 565 kg 4.320,00 €
extra charge for:
crane hook 3 t 220,00 €screwed gravel tine, each 59,00 € welded gravel tine, heavy construction, each 79,00 €protection tube 245,00 €pressure limiting valve (220 bar) 210,00 €Pressure holding valve (needed for special loaders) 250,00 €
Type ES RL/TL no. 305
dirt bucket conical, loading goods up to 1600 kg/cbm
for wheel- or telescopic loader
height 720 mm, depth 980 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement, 2 inlying middle reinforcements for widths of 2200 mm
width volume weight price
1600 mm 760 l 290 kg 1.150,00 €
1800 mm 860 l 310 kg 1.230,00 €
2000 mm 965 l 330 kg 1.290,00 €
2200 mm 1065 l 350 kg 1.490,00 €
2500 mm 1215 l 390 kg 1.710,00 €
2600 mm 1255 l 410 kg 1.770,00 €
2800 mm 1370 l 420 kg 1.870,00 €
3000 mm 1470 l 440 kg 2.030,00 €
extra charge for:
spill guard 175,00 €cutting edge 200 x 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 x 20 mm 500 HB, per m 320,00 €screwed gravel tine, each 59,00 €welded gravel tine, each 79,00 €wear resistant sub-construction 395,00 €protection tube 245,00 €
51
Type SGS RL/TL no. 309
Heavy duty bucket loading goods up to 2500 kg/cbm
for wheel- or telescopic loader
height 850 mm, depth 800 mm, hardened cutting edge 150 × 20 mm 500 HB, spill guard, for widths of 2000 mm 1 inlying middle reinforcement
width volume weight price
1600 mm 800 l 265 kg 1.640,00 €
1800 mm 910 l 410 kg 1.740,00 €
2000 mm 1010 l 450 kg 1.840,00 €
2200 mm 1120 l 480 kg 1.950,00 €
2400 mm 1220 l 515 kg 2.070,00 €
2600 mm 1320 l 555 kg 2.230,00 €
2800 mm 1430 l 575 kg 2.395,00 €
extra charge for:
crane hook 3 t 220,00 €inlying middle reinforcement, each 280,00 €cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €wear resistant sub-construction 395,00 €protection tube 245,00 €screwed gravel tine, each 59,00 € welded gravel tine, heavy construction, each 79,00 €
Type LS RL/TL no. 323
load bucket loading goods up to 2500 kg/cbm
for wheel- or telescopic loader
height 1300 mm, depth 1300 mm, made of 8 mm fine grained steel,hardened cutting edge 300 × 30 mm 500 HB, 2 inlying middle reinforcements, wear resistant sub-construction 500 HB
width volume weight price
2500 mm 2620 l 1040 kg 4.250,00 €
2800 mm 2950 l 1160 kg 4.650,00 €
3000 mm 3160 l 1250 kg 4.990,00 €
extra charge for:
cutting edge 300 × 30 mm 500 HB, per m 245,00 €welded gravel tine, each 85,00 €
WH
EEL-
AN
D T
ELES
CO
PIC
LO
AD
ER
30
0
52
Type DUS RL/TL no. 310
silage fork With Grapple for wheel- or telescopic loader
height 780 mm, opening width ca. 1500 mm, tine length 1000 mm, thick material main tube with welded cones, tines high value full material, twist-protected tines in the nipper knife,2 hydraulic cylinders
width number of tines weight price
1800 mm 10 580 kg 2.825,00 €
2000 mm 11 610 kg 3.070,00 €
2300 mm 12 650 kg 3.250,00 €
2500 mm 13 690 kg 3.400,00 €
2800 mm 14 770 kg 3.710,00 €
3000 mm 15 820 kg 3.950,00 €
Type DUS SLZ RL/TL no. 310 a
silage fork With Grapple with heavy duty tines
for wheel- or telescopic loader
height 780 mm, opening width ca. 1500 mm, tine length 1000 mm, thick material main tube with welded cones, heavy duty tines, twist-protected tines in the nipper knife, 2 hydraulic cylinders
width number of tines weight price
1800 mm 10 600 kg 3.375,00 €
2000 mm 11 630 kg 3.645,00 €
2300 mm 12 670 kg 3.840,00 €
2500 mm 13 710 kg 4.045,00 €
2800 mm 14 790 kg 4.400,00 €
3000 mm 15 840 kg 4.775,00 €
extra charge for:
pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €
extra charge for:
pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €
53
Type ESG RL/TL no. 324
bulky Goods bucket conical
for wheel- or telescopic loader
height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 20 mm 500 HB, wear resistant sub-construction, inlying middle reinforcement, removable sideparts screwed, 2 inlying middle reinforcements for widths of 2200 mm, thick material main tube with reinforced graps, 2 hydraulic cylinders, adjustable pressure limiting valvel
width volume weight price
1600 mm 1030 l 510 kg 3.780,00 €
1800 mm 1160 l 535 kg 3.890,00 €
2000 mm 1290 l 575 kg 4.070,00 €
2200 mm 1490 l 610 kg 4.280,00 €
2500 mm 1620 l 660 kg 4.400,00 €
extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €one more supporting point at the grapple 350,00 €oil flow divider 90 l/min 320,00 €pressure holding valve (needed for special loaders) 250,00 €
Type RSG RL/TL no. 338
brusk Pile Grabfor wheel- or telescopic loader
height 780 mm, opening width ca. 1500 mm, tine length 1000 mm, thick material main tube with welded cones, heavy duty tines, wear resistant sub-construction, reinforced sickles on the grapple, 2 hydraulic cylinders
width number of tines weight price
1800 mm 10 620 kg 3.050,00 €
2000 mm 11 650 kg 3.150,00 €
2300 mm 12 690 kg 3.290,00 €
2500 mm 13 730 kg 3.390,00 €
2800 mm 14 810 kg 3.580,00 €
3000 mm 15 860 kg 3.850,00 €
extra charge for:
pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €
WH
EEL-
AN
D T
ELES
CO
PIC
LO
AD
ER
30
0
54
Type SHN M RL/TL no. 311
silage bucket conical
for wheel- or telescopic loader
height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement,2 inlying middle reinforcements for widths of 2200 mm, thick material main tube with welded sickles, 2 hydraulic cylinders, 1 sickle all-side, 3 points at the grapple for widths of 2800 mm
width volume weight price
1600 mm 1030 l 550 kg 2.970,00 €
1800 mm 1160 l 575 kg 3.040,00 €
2000 mm 1290 l 615 kg 3.190,00 €
2200 mm 1490 l 660 kg 3.420,00 €
2500 mm 1620 l 700 kg 3.690,00 €
2800 mm 1820 l 740 kg 4.090,00 €
3000 mm 1950 l 770 kg 4.350,00 €
extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €one more supporting point at the grapple 350,00 €wear resistant sub-construction 395,00 €reinforced sickle, each 30,00 €
closed sideparts of the grapple 590,00 € pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €
Type RSS RL/TL no. 325
bucket With Grapple conical
for wheel- or telescopic loader
height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement, removable sideparts screwed, 2 inlying middle reinforcements for widths of 2200 mm, thick material main tube with twist protected tines, 2 hydraulic cylinders
width volume weight price
1600 mm 1030 l 510 kg 3.490,00 €
1800 mm 1160 l 535 kg 3.580,00 €
2000 mm 1290 l 575 kg 3.770,00 €
2200 mm 1490 l 610 kg 3.950,00 €
2500 mm 1620 l 660 kg 4.090,00 €
extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €one more tine at the side, each 69,00 €one more supporting point at the grapple 350,00 €oil flow divider 90 l/min 320,00 €wear resistant sub-construction 395,00 €pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €
55
silage bucket conical
for wheel- or telescopic loader
height 900 mm, depth 1200 mm, opening width ca. 1850 mm, hardened cutting edge 200 × 20 mm und wear resistant sub-construc-tion 500 HB, 2 inlying middle reinforcements, 3 points at the grapple, thick material main tube with welded sickles, 2 hydraulic cylinders, 1 sickle all-side, 4 points at the grapple for widths of 2800 mm
Type SHN RL/TL no. 322 width volume weight price
2000 mm 2150 l 1080 kg 5.450,00 €
2200 mm 2400 l 1120 kg 5.550,00 €
2500 mm 2750 l 1160 kg 5.890,00 €
2800 mm 3050 l 1255 kg 6.350,00 €
3000 mm 3300 l 1310 kg 6.950,00 €
extra charge for:
cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 € cutting edge 300 × 30 mm 500 HB, per m 160,00 €cutting edge with screwed knife 300 × 30 mm 500 HB, per m 360,00 € one more supporting point at the grapple 350,00 €reinforced sickles, each 30,00 €
closed sideparts of the grapple 720,00 €pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €
Type SHN L RL/TL no. 332
silage bucket conical
for wheel- or telescopic loader
height 900 mm, depth 1030 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 20 mm HB 500, inlying middle reinforcement, 2 inlying middle reinforcements for widths of 2200 mm, thick material main tube with welded sickles, 2 hydraulic cylinders, 1 sickle all-side
width volume weight price
1600 mm 1370 l 650 kg 3.820,00 €
1800 mm 1540 l 675 kg 3.950,00 €
2000 mm 1700 l 715 kg 4.040,00 €
2200 mm 1880 l 760 kg 4.190,00 €
2500 mm 2130 l 800 kg 4.350,00 €
2600 mm 2210 l 825 kg 4.520,00 €
2800 mm 2390 l 840 kg 4.750,00 €
3000 mm 2560 l 970 kg 4.990,00 €
extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 € cutting edge 300 × 30 mm 500 HB, per m 160,00 € cutting edge with screwed knife 300 × 30 mm 500 HB, per m 360,00 € one more supporting point at the grapple 350,00 €wear resistant sub-construction 395,00 €
closed sideparts of the grapple 720,00 €pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €
WH
EEL-
AN
D T
ELES
CO
PIC
LO
AD
ER
30
0
56
Type SBS L RL/TL no. 331
silage bucket conical
for wheel- or telescopic loader
height 900 mm, depth 1030 mm, opening width 1470 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement,2 inlying middle reinforcements for widths of 2200 mm, thick material main tube with welded cones and twist-protected tines, 2 hydraulic cylinders, 1 sickle all-side
width volume weight price
1600 mm 1370 l 650 kg 3.920,00 €
1800 mm 1540 l 675 kg 4.050,00 €
2000 mm 1700 l 715 kg 4.140,00 €
2200 mm 1880 l 760 kg 4.290,00 €
2500 mm 2130 l 800 kg 4.450,00 €
2600 mm 2210 l 825 kg 4.620,00 €
2800 mm 2390 l 840 kg 5.050,00 €
3000 mm 2560 l 970 kg 5.600,00 €
extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 € cutting edge 300 × 30 mm 500 HB, per m 160,00 €cutting edge with screwed knife 300 × 30 mm 500 HB, per m 360,00 € one more supporting point at the grapple 350,00 €
wear resistant sub-construction 395,00 €closed sideparts of the grapple 720,00 €pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €
silage bucket conical
for wheel- or telescopic loader
height 720 mm, depth 980 mm, opening width 1470 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement,2 inlying middle reinforcements for widths of 2200 mm, thick material main tube with welded cones and twist-protected tines, 2 hydraulic cylinders, 1 sickle all-side
Type SBS M RL/TL no. 312
width volume weight price
1600 mm 1030 l 550 kg 3.020,00 €
1800 mm 1160 l 575 kg 3.120,00 €
2000 mm 1290 l 615 kg 3.350,00 €
2200 mm 1490 l 660 kg 3.550,00 €
2500 mm 1620 l 700 kg 3.790,00 €
2800 mm 1820 l 740 kg 4.320,00 €
3000 mm 1950 l 770 kg 4.650,00 €
extra charge for:
cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 € one more supporting point at the grapple 350,00 €wear resistant sub-construction 395,00 €
closed sideparts of the grapple 590,00 € pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €
57
Type SBS XL RL/TL no. 343
silage bucket Xl for wheel- or telescopic loader
height 1080 mm, depth 1290 mm, opening width ca. 2040 mm, made of fine grained steel, hardened cutting edge 250 × 25 mm and wear resistant sub-construction 500 HB, 2 inlying middle reinforcements, 2 points at the grapple, 3 points at the grapple for widths of 2800 mm, thick material main tube with welded cones and twist-protected heavy duty tines, 2 hydraulic cylinders, 2 sickles all-side
width volume weight price
2200 mm 3120 l 1450 kg 7.090,00 €
2500 mm 3550 l 1640 kg 7.990,00 €
2600 mm 3690 l 1700 kg 8.250,00 €
2800 mm 3950 l 1810 kg 8.560,00 €
3000 mm 4240 l 1920 kg 8.850,00 €
extra charge for:
screwed knife 250 × 25 mm 500 HB, per m 195,00 € cutting edge 300 × 30 mm 500 HB, per m 160,00 €cutting edge with screwed knife 300 × 30 mm 500 HB, per m 360,00 € one more supporting point at the grapple 450,00 €closed sideparts of the grapple 790,00 €
pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €
Type SBS RL/TL no. 313
silage bucket conical
for wheel- or telescopic loader
height 900 mm, depth 1200 mm, opening width ca. 1850 mm, hardened cutting edge 200 × 20 mm and wear resistant sub-construction 500 HB,2 inlying middle reinforcements, 3 points at the grapple, 4 points at the grapple for widths of 2800 mm, thick material main tube with welded cones and twist-protected heavy duty tines, 2 hydraulic cylinders, 1 sickle all-side
width volume weight price
2000 mm 2150 l 1040 kg 5.750,00 €
2200 mm 2400 l 1095 kg 5.900,00 €
2500 mm 2750 l 1130 kg 6.200,00 €
2800 mm 3050 l 1225 kg 6.690,00 €
3000 mm 3300 l 1265 kg 7.250,00 €
extra charge for:
cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 € cutting edge 300 × 30 mm 500 HB, per m 160,00 €cutting edge with screwed knife 300 × 30 mm 500 HB, per m 360,00 € one more supporting point at the grapple 350,00 €closed sideparts of the grapple 720,00 €
pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €
WH
EEL-
AN
D T
ELES
CO
PIC
LO
AD
ER
30
0
58
width volume weight price
1400 mm 730 l 490 kg 3.950,00 €
1600 mm 840 l 530 kg 4.250,00 €
1800 mm 940 l 580 kg 4.650,00 €
2000 mm 1040 l 620 kg 5.050,00 €
2200 mm 1155 l 680 kg 5.450,00 €
2300 mm 1210 l 710 kg 5.650,00 €
2500 mm 1310 l 775 kg 5.950,00 €
2600 mm 1365 l 800 kg 6.150,00 €
2800 mm 1470 l 865 kg 6.350,00 €
extra charge for:
cutting edge 200×20mm 500 HB, per m 120,00 €cutting edge with screwed knife 200×20mm 500 HB, per m 220,00 €one more supporting point at the grapple 295,00 €
width volume weight price
1600 mm 1070 l 700 kg 5.300,00 €
1800 mm 1240 l 725 kg 5.750,00 €
2000 mm 1400 l 765 kg 6.150,00 €
2200 mm 1580 l 810 kg 6.550,00 €
2300 mm 1670 l 830 kg 6.750,00 €
2500 mm 1830 l 850 kg 6.990,00 €
2600 mm 1960 l 875 kg 7.250,00 €
2800 mm 2090 l 890 kg 7.450,00 €
extra charge for:
cutting edge with screwed knife 200×20mm 500 HB, per m 220,00 €pressure limiting valve (220 bar) 150,00 €pressure holding valve (needed for special loaders) 180,00 €
Type Sp SB M RL/TL no. 352
SMART PUSH silage bucket m for wheel- or telescopic loader loading goods up to 900 kg/cbm
height 700 mm, depth 940 mm, 4 supporting points at the grapple for widths of 2800 mm, variable mechanical back board, overload safety device, heavy upper looper with sickles (HB 500), open back board, made of fine grained steel, polyamid wear plate profil, hardened cutting edge 150 × 16 mm 500 HB
Type Sp SB L RL/TL no. 353
SMART PUSH silage bucket l for wheel- or telescopic loader loading goods up to 900 kg/cbm
height 900 mm, depth 1030 mm, 4 supporting points at the grapple for widths of 2800 mm, variable mechanical back board, overload safety device, heavy upper looper with sickles (HB 500), open back board, made of fine grained steel, polyamid wear plate profil,hardened cutting edge 200 × 20 mm 500 HB,
wear resistant sub-construction 340,00 €reinforced sickle, each 20,00 €pressure limiting valve (220 bar) 150,00 €pressure holding valve (needed for special loaders) 180,00 €
one more supporting point at the grapple 295,00 €wear resistant sub-construction 340,00 €reinforced sickle, each 20,00 €
59
Type WVK RL/TL no. 315
tool carrierfor wheel- or telescopic loader
load capacity max. 4000 kg, tool carrier for loading/transport of attachments with cat-adapteradjustable Cat 2–3
width height weight price
1200 mm 750 mm 370 kg 1.390,00 €
Type CH RL/TL no. 337
container Hookfor wheel- or telescopic loader
handle containers for bulk tippers, length 600 mm
> Attention for the load diagram of the loader!
load capacity weight price
5000 kg 180 kg 1.450,00 €
Extra charge for:
wire and hook 170,00 €
Type ASLH RL/TL no. 317
crane Hook for wheel- or telescopic loader
forged swivel hookPlease indicate diameter of pallet fork tines.
load capacity weight price
3200 kg 75 kg 790,00 €
5000 kg 95 kg 990,00 €
Extra charge for:
forged swivel hook 5,0 t 280,00 €
WH
EEL-
AN
D T
ELES
CO
PIC
LO
AD
ER
30
0
60
Type LH RL/TL no. 318
crane Hook forged swivel hook
for wheel- or telescopic loader
load capacity working radius weight price
3200 kg 500 mm 190 kg 1.390,00 €
3200 kg 1000 mm 210 kg 1.730,00 €
3200 kg 1500 mm 240 kg 1.900,00 €
3200 kg 2000 mm 260 kg 2.100,00 €
5000 kg 500 mm 210 kg 1.620,00 €
5000 kg 1000 mm 230 kg 1.930,00 €
5000 kg 1500 mm 260 kg 2.170,00 €
5000 kg 2000 mm 280 kg 2.370,00 €
Type LH S RL/TL no. 319 Frachtkostenanteil innerhalb Deutschlands 160,00 €
crane Hook forged swivel hook
for wheel- or telescopic loader
load capacity working radius weight price
12000 kg 500 mm 495 kg 3.100,00 €
Type BBT RL/TL no. 320
bIG-baG carrierfor wheel- or telescopic loader
mechanicly adjustable in 3 heights 1200 – 1800 mm, crane hook in three-steps adjustable
load capacity working radius weight price
1000 kg 1000 mm 185 kg 1.390,00 €
1500 kg 1000 mm 195 kg 1.560,00 €
61
Type AK RL/TL no. 321
Working Platform for wheel- or telescopic loader
size ca. 1154 × 1224 mm, lifting force 300 kg, interlocking divice for fork tines, selflocking door 600 × 900 mm, non-slip base, fold-away safety guard
lifting force weight price
300 kg 190 kg 1.550,00 €
Type AK II RL/TL no. 327
Working Platformfor wheel- or telescopic loader
size ca. 1100 × 2000 mm, lifting force 300 kginterlocking divice for fork tines, selflocking door 600 × 900 mmnon-slip base, fold-away safety guard
lifting force weight price
300 kg 280 kg 2.950,00 €
extra charge for:
wooden edge guard 240,00 €hot-dip galvanised 550,00 €height up 1000 mm 750,00 €
extra charge for:
wooden edge guard 350,00 €hot-dip galvanised 750,00 €
WH
EEL-
AN
D T
ELES
CO
PIC
LO
AD
ER
30
0
62
Type GETR RL/TL no. 347
Grain Pusherfor wheel- or telescopic loader
height 1000 mm, length ca. 400 mm, torsion free corpus, hardened cutting edge 110 × 12 mm, wear resistant sub-construction, guide plate sidewards, extension possible (small picture)
width weight price
2300 mm 265 kg 1.650,00 €
2500 mm 290 kg 1.850,00 €
3000 mm 370 kg 2.250,00 €
extra charge for:
side plates extension to 400 mm 290,00 €grid frame extension per 500 mm 350,00 €screwed polyurethan cutting edge, per m 170,00 €
Type SLK RL/TL no. 346
silage comb for wheel- or telescopic loader
length 1500 mm, extension possible (small picture)stable grid frame with tool holder,main tube with welded cones,bowed heavy duty tines length 800 mm,twist-protected tines, kinked comb 20°
width weight price
2300 mm 320 kg 2.150,00 €
2500 mm 350 kg 2.390,00 €
3000 mm 395 kg 2.650,00 €
extra charge for:
welded sickles sickles instead of bowed heavy duty tines 180,00 €grid frame extension per 500 mm 350,00 €
63
Type SSD RL/TL no. 329Frachtkostenanteil innerhalb Deutschlands 180,00 €
snow bladefor wheel- or telescopic loader
height 880 mm, vulkollan lip, torsion resistant corpus, hydraulic slewing 30°, level compensation, height adjustable brand named wheels
width working width at 30˚ weight price
2000 mm 1800 mm 320 kg 2.950,00 €
2200 mm 1920 mm 330 kg 3.090,00 €
2600 mm 2280 mm 340 kg 3.290,00 €
2900 mm 2550 mm 360 kg 3.420,00 €
extra charge for:
kAT 2 150,00 €with lamps 180,00 €polyurethane blade, per m 250,00 €wear resistant blade 500 HB, per m 150,00 €
Type SSD V RL/TL no. 344
snow bladefor wheel- or telescopic loader
height 830–970 mm, vulkollan lip, torsion resistant corpus, hydraulic slewing 30°, level compensation, height adjustable brand named wheels
width working width at 30˚ weight price
2000 mm 1750 mm 350 kg 3.550,00 €
2200 mm 1950 mm 370 kg 3.690,00 €
2600 mm 2280 mm 400 kg 3.880,00 €
2900 mm 2550 mm 430 kg 4.275,00 €
extra charge for:
kAT 2 150,00 €with lamps 180,00 €polyurethane blade, per m 250,00 €wear resistant blade 500 HB, per m 150,00 €
WH
EEL-
AN
D T
ELES
CO
PIC
LO
AD
ER
30
0
64
Type KB RL/TL no. 330
sweeperfor wheel- or telescopic loader
mechanical side adjustment, splash guard, hydraulic motor, brush ø 600 mm, height adjustable brandnamed wheels
width weight price
1800 mm 460 kg 4.870,00 €
2000 mm 480 kg 5.250,00 €
2300 mm 495 kg 5.450,00 €
2600 mm 520 kg 6.180,00 €
Type KB S RL/TL no. 342
sweeperfor wheel- or telescopic loader
height 380 mm, steel casing with tool holder, 8 sweeper rows of polypropylene, cleans quickly forward and backwards
width working width at 45° weight price
2400 mm 1700 mm 240 kg 2.200,00 €
2800 mm 2000 mm 280 kg 2.430,00 €
3200 mm 2280 mm 360 kg 2.740,00 €
Extra charge for:
hydraulic side adjustment 790,00 €hopper, hydraulic emptying 1.790,00 €water spray system 1.520,00 €side brush 1.290,00 €side lamps 390,00 €
Price reduction for:
tool holder for pallet forks, indicate diameter of pallet fork tines - 200,00 €
Extra charge for:
mechanical slewing 45° 790,00 €hydraulic slewing 45° 890,00 €
65
latch trestles
Type RS KLK no. 802 version price
short construction (Baas, Frost) 45,00 €
Quick coupler
Type SWR EA no. 801 version price
EURO-norm, mechanical central-locking system 310,00 €
ACCESSORIES 800
66
adapter frame for courtloader
EURO-quick-coupling system
Type ADR HL-EA no. 804
adapter frame for wheel- or telescopic loader
EURO-quick-coupling system
Type ADR RL/TL-EA no. 805
adapter framefor three-point-linkage cat 2–3
3 point linkage for front-and tail hydraulics
Type ADR EA-KAT no. 811
version price
mechanical middle central-locking system 790,00 €
version price
mechanical middle central-locking system 990,00 €
version price
three-point-linkage cat 2–3 790,00 €
latch trestles
Type RS KLL no. 803 version price
long construction (Stoll) 49,00 €
67
fork tine DIN 500 load capacity 1500 kg (pair)
Type GZ DIN 80 × 40 mm no. 806
length weight price
900 mm 41 kg 180,00 €
1000 mm 44 kg 190,00 €
1100 mm 46 kg 200,00 €
1200 mm 49 kg 210,00 €
1300 mm 52 kg 220,00 €
fork tine ISO FEM II load capacity 2500 kg (pair)
length weight price
900 mm 36 kg 220,00 €
1000 mm 40 kg 230,00 €
1100 mm 45 kg 240,00 €
1200 mm 48 kg 250,00 €
1300 mm 55 kg 270,00 €
fork tine ISO FEM III load capacity 3500 kg (pair)
length weight price
900 mm 69 kg 280,00 €
1000 mm 73 kg 290,00 €
1100 mm 77 kg 310,00 €
1200 mm 82 kg 325,00 €
1300 mm 85 kg 360,00 €
fork tine ISO FEM III load capacity 4500 kg (pair)
length weight price
1000 mm 80 kg 330,00 €
1100 mm 87 kg 340,00 €
1200 mm 95 kg 370,00 €
1300 mm 105 kg 390,00 €
1500 mm 115 kg 490,00 €
Type GZ FEM II 100 × 40 mm
Type GZ FEM III 100 × 50 mm
Type GZ FEM III 120 × 50 mm
68
fork tine ISO FEM III load capacity 5000 kg (pair)
length weight price
1000 mm 90 kg 380,00 €
1100 mm 97 kg 390,00 €
1200 mm 105 kg 420,00 €
1500 mm 115 kg 540,00 €
fork tine ISO FEM IV load capacity 6000 kg (pair)
length weight price
1200 mm 115 kg 720,00 €
1300 mm 125 kg 800,00 €
1500 mm 135 kg 870,00 €
Pallet fork extensions load capacity 2000 kg (pair)
please indicate diameter of pallet fork tines, special length are available on request
Type ZV no. 809
length weight price
1800 mm 35 kg 280,00 €
2000 mm 38 kg 300,00 €
carrier for fork
compl. height 1100 mm, for pallet fork carrier DIN oder FEM norm,please indicate norm of pallet fork carrier
Type GTS Z no. 807
tine length load capacity/each price
1100 mm 600 kg 195,00 €
1400 mm 600 kg 210,00 €
800 mm (heavy duty tine) 1000 kg 205,00 €
1000 mm (heavy duty tine) 1000 kg 220,00 €
1250 mm (heavy duty tine) 1000 kg 250,00 €
Type GZ FEM III 140 × 50 mm
Type GZ FEM IV 130 × 60 mm
69
bIG-baG carrieraufschiebbar auf Pallet Fork with DIN oder FEM Norm for pallet fork carrier DIN oder FEM norm, mechanicly adjustable in 3 heights 1200–1800mm, crane hook adjustable in three-stepsPlease indicate norm of pallet fork carrier.
Type BBT Z no. 808 working radius load capacity weight price
1000 mm 1000 kg 85 kg 450,00 €
Hydraulic Grapple for Pallet fork for pallet fork carrier DIN or FEM norm
radius 500mm, lowest diameter are 200mm, hydraulik grapple with double-acting cylinderPlease indicate norm of pallet fork carrier.
Type HOZ pLG no. 813 weight price
85 kg 890,00 €
Protection tube for road
ubiquitous application for bale fork, manure fork and pallet fork, clench over the tines with signal colour
Type ZS no. 810
width price
1000 mm 140,00 €
1200 mm 150,00 €
1400 mm 155,00 €
1600 mm 165,00 €
1800 mm 175,00 €
2000 mm 185,00 €
2300 mm 210,00 €
2500 mm 260,00 €
70
Type ASK EA no. 903
anschweißkonsolen
euro-norm forged eye
Type ESÖ no. 901 version price
ø 28 mm 15,00 €
Type ESK no. 902
euro-norm forged Hook
version price
for bolt ø 40 mm 21,00 €
version price per Satz
edged for EURO-norm, set (left and right) 89,00 €
REPLACEMENTS AND WEAR PARTS 900
71
main tube for standard tines
with welded cones
Type ZTR no. 904
length number of cones price
810 mm 5 125,00 €
980 mm 6 140,00 €
1200 mm 7 160,00 €
1400 mm 8 180,00 €
1600 mm 9 200,00 €
1800 mm 10 220,00 €
2000 mm 11 235,00 €
2300 mm 12 255,00 €
main tube for heavy duty tines
with welded cones
Type ZTR S no. 904 a
length number of cones price
810 mm 5 190,00 €
980 mm 6 220,00 €
1200 mm 7 250,00 €
1400 mm 8 270,00 €
1600 mm 9 315,00 €
1800 mm 10 345,00 €
2000 mm 11 380,00 €
2300 mm 12 410,00 €
fork tine standard, bowed
no. 906
length price
600 mm 45,00 €
680 mm 46,00 €
800 mm 49,00 €
Heavy duty tine bowed
length price
800 mm 62,00 €
1000 mm 75,00 € no. 906 a
Type ESÖ no. 901
Type ESK no. 902
72
fork tine standard, ø 36 mm
no. 907
length price
400 mm 20,50 €
800 mm 40,00 €
1000 mm 49,00 €
1100 mm 53,00 €
no. 908
Heavy duty tine ø 44 mm
length price
800 mm 59,00 €
1000 mm 65,00 €
1100 mm 72,00 €
1250 mm 76,00 €
1400 mm 95,00 €
1400 mm special heavy duty tine 105,00 €
Wear slat 500 HB
no. 909
width size price per m
80 mm 10 mm 46,00 €
100 mm 10 mm 55,00 €
100 mm 15 mm 61,00 €
120 mm 20 mm 79,00 €
cutting edge one-sided beveled, 500 HB
no. 910
width size price per m
110 mm 12 mm 62,00 €
150 mm 16 mm 87,00 €
150 mm 20 mm 107,00 €
200 mm 20 mm 140,00 €
250 mm 25 mm 205,00 €
300 mm 30 mm 250,00 €
73
screw set, screws and special nuts 10.9
no. 912
thread length price p. set
M 16 25 mm 19,00 €
35 mm 21,50 €
55 mm 24,00 €
M 20 55 mm 37,00 €
special spanner type Hesse
no. 913
no. 914
discription price
adapter for special nuts 39,00 €
hydraulic cylinder base pin price
FS 30 N / TS 30 N ø 30 mm 35,00 €
FS 40 N / TS 40 N ø 40 mm 49,00 €
FS 50 N / TS 50 N ø 50 mm 75,00 €
rod ends
for welding to plungerends or hydraulic cylinder base
plungerends pin price
FS 30 C / TS 30 C ø 30 mm 29,00 €
FS 40 C / TS 40 C ø 40 mm 41,00 €
FS 50 C / TS 50 C ø 50 mm 58,00 €
screw knife two-sided beveled, 500 HB
no. 911
width size price
200 mm 20 mm 250,00 €
250 mm 25 mm 280,00 €
300 mm 30 mm 300,00 €
74
Hydraulic Hoses (2 sn) incl. o-ring
no. 915
version length price
NW 10 DkOL/DkOL 700 mm 36,00 €
800 mm 39,00 €
1000 mm 42,00 €
1200 mm 48,00 €
NW 12 DkOL/DkOL 300 mm 26,00 €
500 mm 34,00 €
1000 mm 45,00 €
1200 mm 54,00 €
1830 mm 64,00 €
2650 mm 76,00 €
2850 mm 79,00 €
3050 mm 85,00 €
NW 12 DkOL/DkOL 90° 600 mm 38,00 €
800 mm 43,00 €
1050 mm 48,00 €
1250 mm 59,00 €
1950 mm 68,00 €
2050 mm 75,00 €
no. 916
Hydraulic couplers
SVk-plug-in coupling plug BG II M 18 x 1,5 24,00 €SVk-bushing-in coupling plug BG II M 18 x 1,5 25,50 €
SVk-plug-in coupling plug BG III M 22 x 1,5 25,50 €SVk-bushing-in coupling plug BG III M 22 x 1,5 27,50 €
Flat-Face gasket plug BG II M 18 x 1,5 38,00 €Flat-Face gasket bushing BG II M 18 x 1,5 51,00 €
Flat-Face gasket plug BG III M 22 x 1,5 42,00 €Flat-Face gasket bushing BG III M 22 x 1,5 71,00 €
threaded coupling Sk plug BG III M 18 x 1,5 33,00 €threaded coupling Sk plug BG III M 22 x 1,5 33,00 €
oil flow divider
no. 917
price
oil flow divider 45 l/min 245,00 €
oil flow divider 90 l/min 270,00 €
oil flow divider 150 l/min 310,00 €
pressure holding valve 235,00 €
pressure holding valve adjustable 260,00 €
75
no. 919
bolts
hardened bolts in different sizesPlease indicate type and number of the loader.
cones
no. 920
version length tine price
bolted 82 mm ø 36 mm standard tine 20,00 €
swiveled 110 mm ø 36 mm standard tine 30,00 €
swiveled 110 mm ø 36 mm twist-protected 33,50 €
swiveled 120 mm ø 44 mm for heavy duty tine 32,00 €
swiveled 120 mm ø 44 mm twist-protected 38,00 €
swiveled 140 mm ø 55 special heavy duty tine 38,00 €
Inner tension bushes
hardened PN 7000
version bolt outside price
ESB 30 ø 30 mm 35 x 20 mm 22,00 €
ESB 40 ø 40 mm 50 x 40 mm 26,00 €
ESB 50 ø 50 mm 60 x 50 mm 31,00 € no. 921
Hydraulic cylinder
no. 918
cylinder housing plunger stroke length price
40 mm 20 mm 500 mm 145,00 €
50 mm 30 mm 150 mm 195,00 €
50 mm 30 mm 180 mm 215,00 €
60 mm 35 mm 500 mm 245,00 €
80 mm 50 mm 200 mm 245,00 €
80 mm 50 mm 250 mm 270,00 €
80 mm 50 mm 350 mm 290,00 €
100 mm 60 mm 300 mm 325,00 €
120 mm 70 mm 350 mm 380,00 €
variant price
indicate type and number of the loader on request
76
Gravel tine
engineering drawing forindication of measurements
Type E3, screwed Maße: L = 184 mm, A = 50 mm, E = 84 mm, T = 40 mm, I = 40 mm, S = 15 mm
Type E5, screwed Maße: L = 212 mm, A = 57 mm, E = 96 mm, T = 42 mm, I = 42 mm, S = 20 mm
no. 922
convert-set
welded on bracketsfor backfitting of different loaders
no. 923
carrier beams
version for pallet fork price
upper part DIN tine length 1000 mm 88,00 €
lower part " 74,00 €
upper part ISO FEM II tine length 1000 mm 188,00 €
lower part " 180,00 €
upper part ISO FEM II tine length 1200 mm 229,00 €
lower part " 210,00 €
upper part ISO FEM III tine length 1000 mm 225,00 €
lower part " 210,00 €
upper part ISO FEM III tine length 1200 mm 245,00 €
lower part " 235,00 €
no. 924
version price
Type E3, screwed 38,00 €
Type E5, screwed 45,00 €
version price
indicate type and number of the loader on request
77
locking for Pallet fork tine
set composed of lower and upper parts with locking
version price per satz
locking for DIN Fork Tine 79,00 €
locking for ISO FEM II Fork Tine 95,00 €
locking for ISO FEM III Fork Tine 108,00 €
locking for ISO FEM IV Fork Tine 148,00 € no. 925
Hydraulic tube zinc-plated
version price per m
hydraulic tube ø 12 mm 32,00 €
hydraulic tube ø 15 mm 36,00 € no. 926
version price
indicate type and number of the loader on request
Welded bushings
different constructionsPlease indicate type and number of the loader.
no. 927
controlled and evenly dosed sliding out of various loads
elevation of the overload height
reduced weight compared with high dump buckets
unloading at feed racks possible
low initial costs
no shift of load centre whilst unloading
complete emptying due to push-off wall
mechanical activation, no second hydraulic circuit required
that's how professionals do their work.
Hesse metalltechnik GmbHTeichstraße 23D - 59505 Bad Sassendorf
+ 49 (0) 2921-350 9990