1
TENDER DOCUMENT
FOR
RELOCATION/REFURBISHMENT OF SERVER ROOM
PAKISTAN NUCLEAR REGULATORY AUTHORITY ISLAMABAD
2
TENDER DOCUMENT
(A) INSTRUCTIONS:
a) It is in the interest of the bidder to read all the conditions given below and ensure that these conditions are complied with.
b) The bidders should visit the site before submitting the quotations, for site visit contact PE (CWG), PNRA HQ's Islamabad.
c) Technical and financial bids must be submitted separately in sealed envelopes. Technical bids will
be opened on the date and time published in the advertisement i.e. 24/01/2019 on 11:30 Hrs at
PNRA HQs G-8/1, Islamabad in the presence of those bidders who wish to attend. d) Financial bids will be opened within (15) days after evaluation of technical bids at the date and
time communicated to the bidders through email/postal mail, in the presence of all those who wish
to attend. e) Quotations must be sent in sealed envelope and should be addressed to “Senior Administrative
Officer Procurement, Pakistan Nuclear Regulatory Authority, Mauve Area, G-8/1, Islamabad”.
The sealed envelope/cover should clearly indicate “QUOTATIONS FOR
RELOCATION/REFURBISHMENT OF SERVER ROOM T # 06/2018-19”.
(B) CONDITIONS:
a) Bidders should be registered with FBR for all applicable Govt. Taxes.
b) Earnest money @ 2% of the total price of the offer in the shape of pay order/bank draft in favor of
“Senior Accounts officer, PNRA HQs, Islamabad” should be attached with the quotation.
Quotations without or less than 2% earnest money will summarily be rejected.
c) Quoted prices should be in Pak Rupees for supply & installation at PNRA HQs Islamabad, and
should be inclusive of all applicable Government Taxes. All taxes will be deducted as per G.O.P.
rules.
d) Earliest execution of work is required. The successful bidder shall have to execute and complete
the job within 120 days after the issuance of Work Order.
e) The quotations must be valid for acceptance for at least sixty (60) days from the date of opening of
the tender.
f) Incomplete and conditional quotations will be rejected outright.
g) Single Stage-Two envelope procedure will be followed and Firms/suppliers are required to submit
the Technical Proposal and Financial Proposal in separate sealed envelopes. Evaluation of
Technical bids will be done within (45) days after opening of the tender.
h) An amount equivalent to 10% of the total price of the bid will be retained till the successful
completion of the maintenance/warranty period of the work/items supplied i.e. One Year. During
this period, if the work done is found to be defective, the supplier is liable to rectify the defect.
Moreover, if any component/equipment supplied/installed is found to be defective the supplier is
liable to replace it. Failure to do so, the authority reserves the right to utilize this amount to rectify
the defects.
i) The decision to increase the job completion time of the selected firm lies with PNRA and this will
be granted subject to provision of sufficient justification by the firm.
j) PNRA reserves the right to increase/decrease the quantity or accept/reject any or all tenders
without assigning any reason thereof.
k) Technical submittals shall have to be provided for all the equipment for approval.
l) All the items supplied/installed should be brand new in manufacturers packing, or properly
assembled and should bear the manufacturers standard warranty/guarantee (if applicable).
Warranty should be valid throughout Pakistan.
m) During evaluation, any firm found to be indulging in providing any false statement
/documents/malpractice, is liable to be disqualified. n) In case the work is not carried out within the specified time,Rs. 5,000/- per day will be charged as
liquidated damages.
o) The rates and prices quoted by the bidders shall be final. No escalation will be paid under any
circumstances whatsoever during the performance of the Contract.
3
(C)BILL OF QUANTITY:
Sr.# Description Qty. Unit Unit Rate
(Rs.) Amount (Rs.)
A Electrical Works
1 Supply &Wiring for 3-Pin, 5A Socket (Make:
Clipsal or MK) from point to DB with 3-2.5mm².
S/C, PVC insulated, Cu cables in 40x40 Dura Duct
at wall or as required. Complete in all respect with
all accessories and sockets.
30 No
2 Supply & Wiring for 3-pin, 20A, S/Socket (Make:
Clipsal or MK) from point to DB with 3-4mm²
S/C, PVC insulated, Cu cables in 40x40 Dura Duct
in the wall or as required. Complete in all respect
with all accessories and S/Sockets
15 No
3 Supply & Wiring for 3-pin, 32A Industrial Socket
(Make: Clipsal or MK) from point to DB with 3-
6mm² S/C, PVC insulated, Cu cables in 40x40
Dura Duct in the wall or as required. Complete in
all respect with all accessories and Industrial
Sockets
8 No
4 Supply & fixing (with 3 meter cable, flexible
conduit and PVC connector) of 15 W Astra Slim
round panel LED light for false ceiling in day light
color, complete in all respect with accessories.
Make: Philips or approved equivalent
30 No
5 Supply, laying and termination of PVC insulated
Copper Conductor 600 / 1000 V grade single Core/
multi-color Cables. Make: Pakistan Cables,
Fast or Newage
a 4-Core, 6 sq.mm PVC/PVC. 100 rft
b
4-Core, 10 sq.mm PVC/PVC. 100 rft
c 4-Core, 16 sq.mm PVC/PVC. 60 rft
6
Distribution Boards & Panels as under :
Providing, installing, connecting & commissioning
of the following Distribution Boards (DB)
fabricated with 14 SWG steel clad, cubical design
with hinged door cover, wall mounted, factory
assembled, suitable for 3 phase, 4 wire, 500 volts,
50 Hz A.C. Power Supply complete with copper
cable lugs, glands, neutral link, earth block, terminal
block, busbars etc., & having following
configurations. (All equipment rated to 7.5kA short
circuit rating and 50°C ambient temperature at
415V). Panel enclosure to comply with IP-50.
Switchgear Make: Schneider or approved
equivalent.
4
a
DB (AC)
1 No.
Incoming
1 -150 A, T.P., M.C.C.B - (Adjustable) 3 - Indication lights
3 – Fuses
Outgoing
3 - 30 A, T.P., M.C.C.B
3 - 20 A, S.P., M.C.C.B
b
LPDB (Server Room)
1 No.
Incoming
1 -100 A, T.P., M.C.C.B - (Adjustable) 3 - Indication lights
3 – Fuses
Outgoing
12 - 10 A, S.P., M.C.C.B
05 - 16 A, S.P., M.C.C.B
05 - 20 A, S.P., M.C.C.B
08 - 30 A, S.P., M.C.C.B
c
DB (Tech. Room)
1 No.
Incoming
1 -100 A, T.P., M.C.C.B - (Adjustable) 3 - Indication lights
3 – Fuses
1- VOLT METER 500V WITH SELECTOR
SWITCH
Outgoing
5 - 25 A, S.P. M.C.B
06 - 20 A, S.P. M.C.B
12 - 10 A, S.P. M.C.B
Total =
B Fire Suppression System
1 Supply and Installation of Fire suppression system
with Schedule 40 piping/Cabling, Ducting &
Commissioning along with following allied
equipment, complete in all respect. Make:
NOVEC 1230, UK or approved equivalent
a Fire Suppression Control Panel, Sigma XT with
batteries. KENTEC – UK 1 No.
b Optical Smoke Detector with base. ZITON - UK 6 No
c Fire Alarm Bell. ZITON - UK 1 No
d Fire Alarm Sounder with Flasher. ZITON - UK 1 No
e GSM Module. Make: European 1 No
5
f Abort Switch 1 No
g Discharge Nozzle. SEVO-USA 4 No
h Suppression Gas, NOVEC-1230 484 Lbs
i Gas Cylinder 601 Lbs with accessories. SEVO-UK 1 No
Total =
C HVAC Works
1 Supply, installation and commissioning of imported
floor standing cabinet type split AC units (cooling
only) , including indoor evaporator and outdoor
condensing unit, remote control, flexible wire for
sensor (Control cable), to be protected by flexible
GI pipe, of appropriate size as per manufacturer's
recommendation for indoor / outdoor units, earthing
etc. of the following net capacities, complete in all
respects and as approved by the Engineer.
Make: Daikin, Mitsubishi, York, LG, Toshiba, and
Hitachi.
Note:
a)The technical data sheet in original giving
technical specifications of the items quoted should
be submitted with the quotation.
b) Cost of extra gas charging for refrigerant piping
up to any length to maintain the desired pressure
(recommended by the manufacturer) for optimum
performance of AC units shall be incorporated in
the quoted price of AC units.
a). 4 TR 2 No.
2 Supply, installation and commissioning of imported
wall mounted split AC units, including indoor
evaporator and outdoor condensing unit , remote
control, flexible wire for sensor(Control cable) of
appropriate size as per manufacturer's
recommendation for indoor / outdoor units, earthing
etc. of the following net capacities, complete in all
respects and as approved by the Engineer.
Make: Daikin, Mitsubishi, Yark, LG, Toshiba, and
Hitachi.
Note:
a) The technical data sheet in original giving
technical specifications of the items quoted should
be submitted with the quotation.
B) Cost of extra gas charging for refrigerant piping
up to any length to maintain the desired pressure
(recommended by the manufacturer) for optimum
performance of AC units shall be incorporated in
the quoted price of AC units.
i). 1.0 TR (12,000 BTUs, Reversible) 1 No.
ii). 1.5 TR (18,000 BTUs, Reversible) 1 No.
iii). 2.0 TR (24,000 BTUs, Reversible) 3 No.
6
iii). 2.0 TR (24,000 BTUs, Cool only) 2 No.
3 Supply, installation and testing of refrigerant piping
complete with fittings & hangers etc., 20 SWG
copper pipes, make Mullar, with indoor / outdoor
units with 1" thick expended rubber foam insulation
protected with tape, complete in all respects and as
approved by the Engineer.
i). 3/4" dia. 75 Rft
ii). 5/8" dia. 150 Rft
iii) 1/2" dia 75 Rft
iv). 3/8" dia. 150 Rft
iv). 1/4" dia 100 Rft
4 Supply and installation of MS angle iron frames for
condensing units to be installed on walls / roof
terraces etc. of appropriate size, painted with
approved color, complete in all respects and as
approved by the Engineer.
9 No
5 Supply and installation of 3/4" diauPVC pipe for
condensate drain from indoor unit to drain point
including all fittings, traps, hangers etc. with 1"
thick expended rubber foam insulation protected
with tape., complete in all respects and as approved
by the Engineer.
200 Rft
6 Supply and installation of Dura duct of the
following sizes as per site requirement complete
with fixing arrangements, complete in all respects
and as approved by the Engineer.
i). 100 mm × 100 mm 120 Rft
ii). 60 mm × 60 mm 150 Rft
7 Civil works associated with AC works like cutting
of walls & slabs etc. and repairing as per original,
wherever required, complete in all respects and as
approved by the Engineer in charge.
1 Job
8 Removal of existing installed fan coil unit 1 Job
9 Supply and Installation of Air Purifier of capacity
300 m³/H with HEPA Silent filters, 4-blades and
noise level maximum of 60 dB. Make: Gree, Philips
or approved equivalent.
2 No
Total =
D Civil Works
1 Dismantling of the following, clearing the area and
finishing the surface, disposing the dismantled
material/piling up of material as directed by
Engineer:-
a) Aluminum partition walls/doors. 598 Sft.
b) Brick masonry walls. 176 Sft.
c) 12 mm thick frameless partitions. 110 Sft.
7
2 Providing and laying approved First Class Burnt
Bricks Masonry in super structure walls at any
height and any floor, laid and jointed with cement
and Lawrencepur sand machine mixed mortar,
masonry to be laid in courses true to line, level and
plumb, protected and properly cured including
scaffolding and providing deep joints to receive
rendering, complete in all respects and as directed
and approved by the Engineer.
- - -
230 mm thick in (1:6) CSM 990 Sft.
3 Providing and laying 1/2" thick cement plaster 1:3
on walls/soffit/beams/columns/ceiling with finish as
specified by Engineer. 1980 Sft.
4 Frameless Glass Partition: Providing and fixing at any floor at any height 12
mm thick plain glass full height frameless partitions
fixing with 3/4”x 3/4” aluminum U- Channel at top
with gasket and 4" high 2 mm thick aluminum
section at bottom, true to plumb and beveling of
exposed edges, complete in all respects as per
drawing and as approved by the Engineer.
450 Sft.
5 Frameless Glass Doors: Providing and fixing of 12 mm thick plain frameless
glass doors with floor mounted imported door closer
(hydraulic machine) of approved make and top
pivot, including fixing 4” high 2 mm thick
aluminum section at bottom, with gasket, best
quality door handles, locks, beveling of exposed
edges, complete in all respects as per drawing and as
approved by the Engineer
25 Sft.
6 Frosting: Supplying and fixing good quality frosting tape as
per approved design/make with minimum 4 ft.
width to glass partitions and doors where required,
complete in all respects as directed and as approved
by the Engineer
310 Sft.
7 Providing, laying & fixing of high pressure laminate
raised access flooring for data center with services
corridor complete in all respects and as directed and
approved by the Engineer Description: Modular panel composed of wood-
core particles bound together by heat hardener
resins to guarantee high homogeneity of mechanical
characteristics and dimensional stability. Top Finishes: HPL Laminate with antistatic coating. Bottom Finishes: Aluminum Sheet -0.05mm aluminum sheet to
guarantee barrier against humidity, fire and
electrical continuity to the floor. Laminate-Phenolic laminate sheet to improve the
rigidity of the panel, its mechanical characteristics
and to constitute a barrier against humidity. Steel tray/Steel sheet -0.5 mm galvanized steel
650 Sft.
8
plate to protect the panel from humidity and fire Edge: ABS Protective material in similar colors top
finish for minimal joint effect.
8 Providing and applying roller applied Plastic / Matt
emulsion paint of approved make and shade on wall
/ ceiling at any height, as following, including
rubbing the surface to smooth finish, removing
undulations, complete in all respects and as directed
and approved by the Engineer.
- -
a) 2 x coats of paint over 1 x coat of alkali resisting
primer & 2 x coats of putty as approved. 990 Sft.
b) 2 x coats of paint. 2760 Sft.
9 Providing and fixing 600mmx600mm size 12mm
thick Laminated Gypsum Board false ceiling panels
placed over high grade steel skeleton i/c
wall/column molding main and cross "T" bar
framing having self-locking clips, nails and screws,
sections powder coated in approved color.
suspension system consisting of G.I. adjustable
hangers of 8 SWG, stiffeners, expansion bolts
including provision of lights, A.C Grills, fire alarm
detectors, fire sprinklers, complete in all respect as
directed by the Engineer.
650 Sft.
10 Workbench:
Providing, manufacturing and fixing of
racks/cabinets fixed to wall 750 mm high and 600
mm deep made with two shelves of 32 mm thick
approved lamination board with PVC edging, one at
top and other at bottom raised about 100 mm above
the floor and consisting of 30 x 60 mm Partial wood
frame (2' c/c horizontally and 1' c/c laterally) under
the shelves supported firmly with wall and/or floor.
Top shelve to be fixed with wall and free end to be
supported with two 50 x 50 mm Partial wood
supports at 4' c/c, including spirit polish on wooden
frame, complete in all respects and as approved by
Engineer.
32 Rft.
11 Providing and fixing 3/4 inch thick laminate board
over windows to cover them against light and
intrusion of rodents, hinged (1st class copper) with
30X60 mm Partal frame running on edges of
windows for support, border of soft wood on each
side for finish, complete with all accessories and as
directed by Engineer.
110 Sft.
12 Providing and fixing Malaysian Skin solid core
flush door shutter (1-1/2" thick), deodar wood
chowkhat/frame (2"X7"), door lock, stopper,
hardwares etc. and painting/polishing, etc. with all
accessories, complete in all respects and as
approved by the Engineer.
85 Sft
13 Dismantling and re-installation of existing
aluminum-lasani partition as directed by Engineer. 300 Sft
9
14 Supply and installation of aluminum Sliding
window of anodized Aluminum extruded section
with frame, complete with all accessories like lock,
mosquito mesh etc.
12 Sft
15 Supply and installation of 5 mm green tinted glass
fixed to aluminum window with rubber gasket ahd
water tight seal complete in all respect. 12 Sft
Total =
E CCTV System
1 Digital Video Recorder (DVR) 1 No
a Brand: Samsung, Sony or equivalent
b Frame Rate (NTSC / PAL): 480 fps / 400 fps
(minimum)
c
Max. Record Rate: 480 fps / 400
fps@1920x1080 (NTSC / PAL) (minimum)
d Video Compression: H.264
e Video: 16 CH (Input) (minimum)
f Audio: 16 CH (Input), 1 CH (Output) (min)
g Display Output: VGA, HDMI
h Multiple Screen Display: Supported
i
Storage: 2 TB Installed (minimum), Supports
2x Internal SATAHDDs
j
Backup / Export: USB, Network, Internal and
External USB ODDs
k
Connections / Ports: USB, Network, e-SATA,
Coaxial (Pelco-C, ACP)
l
Recording: Continue, Motion, Alarm, Continue +
Motion
m Search: Calendar, Date/Time, Event, Bookmark
n Security: Password Protection
o Firmware Update: Supported
p Warranty: 1 Year (Labor and Parts)
All the necessary cables, bundled software and
accessories must be supplied
2 CCTV Camera 6 No
a Brand: Samsung, Sony or equivalent
b Resolution: 2 MP (minimum)
c Imaging Device: 1/2.9”, 2M CMOS (minimum)
d Resolution: Full HD (1920 x 1080), 30fps (min)
e
Focal Length: 2.8 ~ 12mm, Variable Focal
(minimum)
f
Illumination: 0.11 Lux (Color), 0 Lux (B/W)
(minimum)
g Digital Wide Dynamic Range: Yes
h Motion Detection: Yes
i Digital Image Stabilization: Yes
j Digital Zoom: Yes
k Digital Noise Reduction: Yes
10
l Backlight Compensation: Yes
m Day & Night: Yes
n Privacy Masking: Yes
o Communication: Coaxial (Pelco-C, ACP)
p Warranty: 1 Year (Labor and Parts)
All the necessary cables, bundled software and
accessories must be supplied
3 Monitor for CCTV System 1 No
a Brand: Samsung, LG, Panasonic or equivalent
b Screen Size: 27 inch (minimum)
c Resolution: Full HD (1920 x 1080) (minimum)
d Video In/Out: 2/2 (minimum)
e RGB In: Yes
f HDMI: Yes
g Audio In: Stereo
h Aspect Ratio: 16:9 (minimum)
i Built-in Speakers: Yes
j Sync Format: NTSC / PAL
k Warranty: 1 Year (Labor and Parts)
All the necessary cables, bundled software and
accessories must be supplied
4 CCTV System (Miscellaneous)
a Coaxial Cable: TFC, Belden or equivalent brand,
RG-6 standard 1 Roll
b
Power Cable: Pakistan Cables or equivalent
brand, 02 cores 1 Roll
c 12U Rack: Yes 1 No
d BNC connectors (Imported): Yes 20 No
e HDMI Cable: Yes 2 No
All cameras, power and other allied accessories
must be supplied. Installation of cables in PVC
pipes/duct including cables charges and
commissioning charges must be included.
Total =
F Biometric Access Control (Door Locking System) 1 No a Brand: Suprema or equivalent
b Application: Access Control
c Authentication Mode: Finger Print, Card,and
PIN d Template Capacity: 10,000 (1:N) (minimum)
e Min Users: 2000 f Log Capacity: 50,000 g TCP/IP: Yes h RS-485: 1 Channel (minimum)
11
i Built-in-Relay: Yes j Wiegand: In/Out Switchable k TTL/IO: 2 Inputs l CPU: 500 MHz (min) m Memory: 16 MB RAM (min) n LCD Display: Color, LCD o LED Indicator: Yes, Multi Color LED p Sound Indication: Multi Tone Buzzer q Ingress Protection: IP65 (Outside) r Tamper: Switch s Warranty: 1 Year (Labor and Parts)
Installation charges, cables, pipe/ducts, door
brackets etc. must be included.
Total =
G KVM Switch for Desktop Machines 2 No
a Brand: Belkin, Adder or equivalent
b Connections: 8 Ports (minimum)
c Port Selection: OSD, Hotkey, Push Button
d KVM Ports: 8 (DVI / VGA / USB) (minimum)
e OS Dependent: No
f Cascade: Yes
g Firmware: Upgradable
h USB Hub: Yes
i Warranty: 1 Year (minimum)
All necessary cables must be included.
Total =
H Revolving Sitting Chairs 20 No
a High back & seat cushion upholstered with Master
molty foam covered with Leather hide or fabric.
b Five Star imported metal base, each prong of
300mm length (approx.)
c Machine & Hydraulic system & Handles imported
(preferably Taiwan or Korean)
d Rest as per the satisfaction of officer In charge &
drawing
e Color: Black or Brown
Total =
I Computer Tables 2 No
a Type: Wooden Frame and Lamination table,
coupled with lockable Drawers, Key Board, CPU
section in the same unit.
b Size: W= 30", L= 60", H= 30
c Drawers: Right Side three drawers with lock all
drawn must have ball channel
d CPU Section: Left side built-in CPU Section with
12
one drawer.
e Key Board Tray: Centrally fixed key board tray
with self-lock.
f Holes: Hole on the top and from CPU section for
cables of CPU, mouse etc.
g All lamination sheet MDF, all edges must be
laminated and PVC lipped
h Color: Dark Brown / Camel Brown
i Warranty: 1 Year
Rest as per the satisfaction of officer In charge &
drawing
Total =
J Vacuum Cleaner 1 No
a Brand: Bosch / Panasonic / Hitachi or equivalent
b Power Consumption: 2300 watts (min)
c Operating Voltage / Frequency: 220v / 50 Hz
d Dust Capacity: 3.5 Ltr (min)
e Type of Filter: HEPA Hygienic
f Other Features: Hard floor nozzle with soft
bristles
g Indication: Dust indicator to avoid overflow
h Warranty: 1 Year service and parts (min)
All the necessary cables and accessories must be
supplied
Total =
K
Installation of Network Points in Server Room,
Technician Room and Monitoring Room Area i.e.
(I/O, Ducts, Patch Panel, Boxes, Face Plates,
Trays etc.)
a I/O, Compatible with Cat 06 Cable, Brand: 3M,
Clipsal or equivalent 80 No
b Wall Mount / PVC Box Fitted Face Plates with
Ethernet I/O for plugging in Patch Cord from
Device, Branded: 3M, Clipsal or equivalent 40 No
c Wall Mounted with Single Shutter Face Plate with
Ethernet Cat 6 I/O's for plugging in patch cords,
Brand: 3M, Clipsal or equivalent 15 No
d Wall Mounted with Dual Shutter Face Plate with
Ethernet Cat 6 I/O's for plugging in patch cords,
Brand: 3M, Clipsal or equivalent 25 No
e RJ-45 Connectors, Compatible with Cat-06.
Branded 3 Boxes
f RJ-11 Connectors, Compatible with telephone cable,
Branded 2 Boxes
g Cat-06 UTP cable roll, 305 meter (minimum), 4
Pairs , Branded: 3M or equivalent 6 Rolls
Ducts:
h 35x40 Brand: Adamjee or equivalent 30 Length
i 40x40 Brand: Adamjee or equivalent 20 Length
13
j 60x60 Brand: Adamjee or equivalent 10 Feet
Any other ducts/trays if required will be provided accordingly.
k Patch Panel:
5 No
l
Cat-06 24 Port Patch Panel, Separate 24 Keystones
Jacks (I/Os) each, Compatible with cat 06 cable
Brand: 3M or equivalent.
All the necessary cable and accessories must be
supplied. Cables must be protect and shielded from
any outside damage.
L Shifting and Installation of Network Equipment
(Racks, Cabinets, Servers etc.) from Basement to
Ground Floor.
1 Job
Total =
M Installation of New Uplinks/Redundant links i.e.
Fiber Optic Uplinks in Old, Additional and
Auditorium building
a Multimode Fiber Optic Cable 4-Core(Feet)
minimum, for Interconnecting Access Switches with
Core Switch, Branded 2500 rft
b Fiber OFDF 24-ports Loaded with Pigtails for server
Room, Branded 2 No
c Fiber OFDF 4-ports Loaded with Pigtails for Each
Floor, Branded 15 No
d Fiber Cable Manager/ Organizer, box containing
OFDF, Branded 15 No
e Multi-Mode Fiber Optic Patch Cord SC-LC,
Branded 40 No
f Splicing of Fiber Optic Cable 110 No
g Fiber Cable Laying (Feet) 2500 rft
h
Fiber Optic Modules/Transceivers, Gigabit,
Compatible with MMF 4-core fiber optic cable
interconnecting Access switches(W2960 + 24 TC-L)
with SG300-10/20SFP switches, Branded 45 No
i Cable Steel Tray (Feet) for ceiling and under
flooring, Branded 400 rft
j SG300-28SFP, Brand: Cisco or equivalent, 1 Year
Parts & Labor Warranty (minimum) 1 No
k All cables must be protected& shielded run in tray
from any damage /Cut.
All the necessary cable and accessories must be
supplied
Total =
Grand Total =
Sr. Administrative Officer (Procurement) Pakistan Nuclear Regulatory Authority
G-8/1, Mauve Area, Islamabad Ph: 051-9263025