Cap�LampModel�KL5M
Technical�Datasheet
Features�
�
�
The KL5M is a bright LED miner’s safety lamp usinga high capacity low weight 5Ah Li-Ion battery pack.Two brightness levels can be selected via a singleswitch.The lamp is constructed of a durable anti-staticplastic and the enclosure is explosion proof makingit suitable for fiery mines.The unit provides cost benefits as a result of lowermaintenance, longer service life (as compared tolead acid battery based products) and less
Operation�
�
The cap lamp provides continuous illumination formore than 18 hours at full brightness, andrecharges completely within 12 hours.The high brightness LEDs have an expectedservice life of >30000 hours, and the Li-Ion batterylife of over 1200 recharge cycles.
Maintenance�
� Cap lamp should be charged with standardcharging rack or single way charger model
All service work to be performed by authorisedAECElectronics personnel only.
Specifications
>18�hours�(using�main�light).Continuous�Usage Time
Warning�and�DisclaimerThe�information�and�recommendations�in�this�document�are�provided�for�reference�purposes�only�and�should�not�be�construed�as�advice�to�cover�every
application�of�the�product�or�variation�of�conditions�under�which�the�product�may�be�used.
8-12�hours.Charging Time
Durable�anti-static�plastic.Construction
-5°C�to�45°C.Temperature�Range
0.4W.Auxillary�LED�Light
1W�>25�Lumens.Main�LED�Light
Standard�charging�rack�or�single-way�charger�Model�GWB-15.Charger
Unit�MassCap�lamp�0.55kg.
Charger�0.18kg.
Unit�Dimensions
Cap�lamp�head�77mm�x�61mm�x�55mm.
Charger�114mm�x�65mm�x�56mm.
Cap�lamp�battery�96mm�x�97mm�x�40mm.
BatteryType
Capacity
3.6V�4.5Ah�Li-Ion.
>1200�recharge�cycles.
Unit�Dimensions
61mm
77mm
55mm
90-240V .ACCharger�Input
50-60Hz.Charger�Frequency
5.5V .DCCharger�Output�Voltage
1000mA.Charger�Output�Current
AEC�Electronics�(Pty)�Ltd
Tel:�+27�11�975-1643���Fax:�+27�11�975-1680Email:�[email protected]���http://www.aece.co.za
P.O.Box�958,�Kempton�Park,�1620,�South Africa
Recommended
