What you need to know • The FASB and the IASB issued a second exposure draft of their converged
revenue model that is closer to current US GAAP than their 2010 proposal.
• The proposed model would apply to all entities in all industries and would
replace all of the general and industry-specific revenue guidance in the
Accounting Standards Codification.
• Applying the proposal would require companies to evaluate performance
obligations at a lower, more detailed level than under current US GAAP.
• The proposal may require entities in the A&D industry to use an input method,
such as a “cost-to-cost” approach, to depict continuous transfer of goods and
services that have been identified as a single performance obligation. Many
entities today use a “units of delivery method.”
• The proposal will significantly increase the volume of financial statement
disclosures.
Overview The revised revenue recognition proposal issued by the Financial Accounting
Standards Board (FASB) and the International Accounting Standards Board (IASB)
(collectively, the Boards) could result in significant changes in practice for
aerospace and defense (A&D) companies.
In this publication, we focus on the following areas that we expect to be of interest
to A&D companies as they consider the potential effects of the proposal:
• Accounting for contract modifications
No. 2012-06
1 February 2012
Technical Line FASB — proposed guidance
In this issue:
Overview ........................................... 1
Background ....................................... 2
Step 1: Identify the contract .............. 2
Step 2: Identify the separate performance obligations ................ 6
Step 3: Determine the transaction price ........................... 9
Step 4: Allocate the transaction price ......................... 10
Step 5: Satisfaction of performance obligations .............. 12
Other measurement and recognition topics ........................ 15
Onerous performance obligations ... 15
Variable or contingent fees ........... 16
Contract costs .............................. 16
Disclosures ...................................... 18
Federal government contract accounting and compliance .......... 19
The revised revenue recognition proposal — aerospace and defense
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
2 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
• Assessing whether performance obligations are distinct
• Allocating the transaction price to separate performance obligations
• Determining whether control transfers over time
• Accounting for contract costs
This publication supplements our Technical Line, Double-exposure: The revised
revenue recognition proposal (SCORE No. BB2231), which describes the Boards’
November 2011 Exposure Draft (ED) in detail, and should be read in connection
with it.
We encourage A&D companies to read this supplement carefully and consider the
potential effects that the proposed model could have on their revenue recognition
practices. The discussions in this publication do not represent final or formal views
because the proposal could change as the Boards deliberate further.
Background The proposal specifies the accounting for all revenue arising from contracts with
customers and affects all entities that enter into contracts to provide goods or
services to their customers (unless those contracts are in the scope of other US
GAAP requirements).
The principles in the proposed standard would be applied using the following five steps:
1. Identify the contract(s) with a customer
2. Identify the separate performance obligations in the contract(s)
3. Determine the transaction price
4. Allocate the transaction price to the separate performance obligations
5. Recognize revenue when the entity satisfies each performance obligation
The proposed guidance would also provide a model for the measurement and timing
of recognition of gains and losses on the sale of certain nonfinancial assets, such as
property and equipment.
Step 1: Identify the contract with a customer To apply the proposal, an entity would first identify the contract, or contracts, to
provide goods or services to its customers. Contracts could be written, oral or
implied by an entity’s customary business practices.
Generally speaking, the step of identifying the contract with the customer would
not differ significantly from current practice. For example, the proposed guidance
on combining two or more contracts entered into with the same customer at or
near the same point in time into a single contract for accounting purposes is
consistent with the existing literature. As a result, we anticipate that entities would
reach conclusions about combining contracts that are similar to today’s
conclusions. However, there may be some changes from current practice, primarily
involving accounting for contract modifications.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
3 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
Contract modifications
Contract modifications occur frequently in the A&D industry, including modifications
where the parties have agreed to change the scope of the contract but have not yet
agreed on a price (frequently referred to as unpriced change orders).
Under the proposal, contract modifications are defined as changes to the scope of
work, the price or both that have been approved by both parties to the contract.
While the ED indicates that modifications would have to be approved by the parties to
the arrangement, it also makes clear that unpriced change orders (that is, a change in
scope that has been approved but the change in price has not yet been determined)
are meant to be considered contract modifications and would be accounted for when
the entity has an expectation that the pricing change will be approved.
The ED outlines a number of ways to account for contract modifications, depending
on the characteristics of the modification and the underlying arrangements. The
alternatives are as follows:
• If the modification changes only the pricing of the promised goods or services,
the change would be treated as a change in the estimated transaction price.
Under the proposal, a change in estimated transaction price after contract
inception would be allocated to the separate performance obligations in the
same manner that the initial estimated transaction price was allocated.
Illustration 1 — Change in price
A contractor entered into an arrangement to provide customized
communication modules to the US Government. The contract includes a
design phase, production and delivery of 60 modules, and maintenance of
the delivered modules. The design phase, the production and delivery phase
and maintenance are three separate performance obligations (see page 6 for
further discussion of identifying separate performance obligations).
At contract inception, the total transaction price of $10,000,000 was
allocated to each performance obligation, based on their relative standalone
selling prices.
Standalone selling price
% of total
Contract price Allocation
Design services $3,000,000 26% $2,000,000 $2,600,000
Production and delivery 7,500,000 65% 7,500,000 6,500,000
Maintenance 1,000,000 9% 500,000 900,000
$11,500,000 100% $10,000,000 $10,000,000
Due to an increase in anticipated costs, the contractor and the customer
agree during the production/delivery phase to increase the price of the
overall contract by $1,000,000.
Because this modification represents only a change in price, the revised
transaction price would be allocated to the separate performance obligations
based on the standalone selling prices used at contract inception.
The proposal may
result in a change
in accounting for
contract modifications.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
4 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
Illustration 1 — Change in price (continued)
Standalone selling price
% of total
Contract price Allocation
Design services $3,000,000 26% $2,000,000 $2,860,000
Production and delivery 7,500,000 65% 8,500,000 7,150,000
Maintenance 1,000,000 9% 500,000 990,000
$11,500,000 100% $11,000,000 $11,000,000
Because the contractor had already completed the design phase and
recognized the revenue allocated to that performance obligation
($2,600,000), the contractor would need to recognize the additional
revenue allocated to this performance obligation to reflect the change in
transaction price that was allocated to the design phase ($260,000).
If the contractor recognized revenue related to the production/delivery
phase, additional revenue would be recognized on a “cumulative catch-up”
basis to reflect the additional progress toward completion in the period in
which the modification was finalized.
• When a modification changes the scope of an arrangement or the scope and
pricing of an arrangement, the modification might be treated as a separate
contract. That is, if the modification results in additional distinct goods and
services and the promised consideration associated with those goods and
services reflects the entity’s standalone selling price, the additional distinct goods
or services and related consideration would be treated as a separate contract.
Illustration 2 — Change in scope and price
A contractor entered into an arrangement to provide communication
modules to the US Government. The contract includes production and
delivery of 60 modules and maintenance on the delivered modules. At
contract inception, the total transaction price of $10,000,000 was allocated
to each performance obligation, based on their relative standalone selling
prices. Midway through the production phase, the contractor and customer
renegotiate the contract. The contractor agrees to provide 30 more
communication modules for additional consideration of $3,750,000.
Because the modification results in a change in both the scope and price of
the arrangement, the contractor must determine whether the additional
goods are distinct and the additional consideration is consistent with the
standalone selling price. In this scenario, the additional 30 modules are
distinct because they are sold regularly by the contractor on a standalone
basis. Furthermore, the additional units are priced at $125,000 per unit,
which is consistent with their standalone selling price.
As a result, the 30 additional communication modules and consideration of
$3,750,000 would be treated as a separate contract. The contractor would
not change the accounting for the original contract.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
5 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
• Contract modifications in which the additional goods or services are not distinct
and the promised consideration associated with the additional goods or
services does not reflect the standalone selling price would not be treated as
separate contracts. Contract modifications that modify or remove previously
agreed to goods and services would also not be treated as separate contracts.
An entity would account for the effects of these modifications differently,
depending on the situation:
• If the goods and services not yet provided are distinct from the goods and
services provided before the modification, the entity would allocate any
consideration not yet recognized as revenue to the remaining separate
performance obligations. In effect, this approach would treat the contract
modification as a termination of the old contract and the creation of a new
contract. While this is not explicitly stated in the ED, we believe that an
entity also would have to reflect in the allocation of the revised transaction
price any changes in the standalone selling prices of the remaining goods
and services.
• If all of the promised goods and services are part of a single performance
obligation (i.e., the goods and services not yet provided are not distinct
from the goods and services provided to date) and that performance
obligation is partially satisfied as of the date of the modification, the entity
would account for the modification as if it were part of the original contract
and would recognize the effect of the modification on a cumulative
catch-up basis. This approach would effectively treat the modification as
part of the original contract.
• If the goods and services not yet provided are a combination of the two
scenarios above, the entity would allocate all remaining consideration to the
unsatisfied (including partially unsatisfied) performance obligations. The
entity would exclude any completely satisfied performance obligations from
this allocation. Again, to perform this reallocation, we believe entities would
have to update their estimates of standalone selling price for each separate
performance obligation. For performance obligations satisfied over time
that are partially satisfied as of the date of the modification/reallocation, the
entity would update the measure of progress based on any changes in the
performance obligations and allocated transaction price on a cumulative
catch-up basis.
Illustration 3 — Change relates to a single performance obligation
A government contractor enters into an arrangement with the US
Government to design and implement a customized software solution for
facility management at military bases across the country. There is a design
phase and an implementation phase at 120 sites for total consideration of
$4.8 million. The design phase is scheduled to last 18 months, and the
implementation phase will occur over the following 18 months. Total costs
for design and implementation are expected to be $3.4 million. Assume that
the contractor determines that it has a single performance obligation (see
below for further discussion) and that the performance obligation is satisfied
over time, based on the criteria for continuous revenue recognition
(discussed further on page 11). In addition, assume the contractor
determines that a cost-to-cost approach best depicts its measure of progress
toward satisfaction of the performance obligation.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
6 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
Illustration 3 — Change relates to a single performance obligation
(continued)
Nine months into the contract, the contractor and the US Government agree
to add 30 sites to the contract and increase the total compensation. Due to
matters identified early in the design phase, the contractor was forced to use
a different software platform in the design phase, which significantly
increased costs. To compensate the contractor for these additional costs and
for the additional 30 sites, the government agreed to increase the total
consideration to $6.8 million. The contractor concludes that the additional
$2 million of compensation exceeds the standalone selling price for
implementation at the additional 30 sites.
In this scenario, the contractor would likely conclude that all of the promised
goods and services (including the additional 30 sites) are part of a single
performance obligation, consistent with its original conclusion. Therefore,
the proposed guidance would require the contractor to update the
transaction price and the measure of progress toward satisfaction of the
performance obligation as of the date of the modification, rather than treat
the modification as a separate contract.
Up to the date of the modification, the contractor had incurred costs of $1
million. Therefore, the contractor determined it was 29% complete in
satisfying its performance obligation ($1 million / $3.4 million) and had
recorded $1.4 million in revenue (29% X $4.8 million). Based on the revised
number of sites under the modified agreement, the contractor determines it
is 22% complete ($1 million / $4.4 million). Accordingly, the contractor
determines cumulative revenue to date should be $1.5 million, compared
with the $1.4 million recorded to date, and recognizes an adjustment to
increase revenue by $100 thousand.
How we see it We believe that using a cumulative catch-up adjustment approach for contract
modifications that relate to a single performance obligation that is partially
satisfied as of the date of the modification (as described in Illustration 3) would
be most common in the A&D industry. We do not believe that the accounting
treatment under the proposal would differ significantly from current practice.
However, if an entity had identified more than one performance obligation in the
contract and determined that, at the time of the modification, some or all of the
completed performance obligations were distinct from those still to be provided,
the proposal would require accounting that would likely be different from
current practice.
Step 2: Identify the separate performance obligations The proposal defines a performance obligation as “an enforceable promise
(whether explicit or implicit) in a contract with a customer to transfer a good or
service to the customer.” The goods or services promised in a customer contract
(either explicitly stated in the contract or implied by customary business
practices) are the potential performance obligations.
Performance obligations
would replace the
“profit center” as the
unit of account for cost
accumulation and revenue
recognition.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
7 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
How we see it This definition of a performance obligation would replace the “profit center”
as defined in ASC 605-35 as the unit of account for cost accumulation and
revenue recognition. The ED would require an entity to identify all promised
goods and services within a contract and determine whether to account for each
of them as a separate performance obligation. ASC 605-35 presumes that the
entire contract is the profit center unless the criteria for combining or
segmenting are met.
Distinct goods and services
After identifying the promised goods and services, an entity would determine which
of them would be accounted for as separate performance obligations. That is, the
entity would identify which goods and services represent individual units of
account. The proposal outlines a two-step process for making this determination.
An entity would consider whether the individual goods or services promised in the
contract are distinct. Goods and services would be distinct when either:
• The entity regularly sells the good or service separately.
• The customer can benefit from the good or service either on its own or
together with other resources that are readily available to the customer (from
the entity or from another entity).
The proposal would then require the entity to consider how those goods and
services have been bundled. The proposal specifies that goods and services within a
bundle would not be distinct if both of the following criteria are met:
• The goods or services are highly interrelated, and transferring the goods or
services requires integration into a combined item.
• The bundle of goods or services is significantly modified or customized to fulfill
the contract.
Finally, the proposal provides a practical expedient that would allow an entity to
account for multiple distinct goods or services as one performance obligation when
the underlying goods and services have the same pattern of transfer. In the basis
for conclusions section, the proposal indicates that the same pattern of transfer
would not strictly relate to two or more performance obligations transferred
simultaneously. We believe that performance obligations transferred consecutively
with a similar pattern (for example, two performance obligations where progress is
measured using labor hours) could also be combined as one performance obligation
under this provision.
We generally believe this guidance addresses many of the concerns raised by A&D
respondents about the 2010 ED in that, for many A&D contracts, it will result in the
identification of a single performance obligation that will be satisfied over time.
However, the required assessment of distinct performance obligations may be
complex and will require the use of judgment, taking into consideration all of the
facts and circumstances. As is the case in assessing the applicability of ASC 605-35
under current US GAAP, the level of customization of products and services
required by the contract would be a key consideration.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
8 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
The following example illustrates how an entity might consider each of the criteria
described above.
Illustration 4 — Multiple goods and services
An aerospace manufacturer enters into a contract with the US Navy to design,
construct and maintain 10 combat aircraft.
Scenario A
Because the manufacturer is designing a new aircraft platform on which to base
the 10 aircraft, the manufacturer anticipates significant design modifications as
the construction phase begins. The design and construction of the aircraft
involves multiple goods and services from various technical resources and
complex procurement and installation of all of the materials. Several of the goods
and services could be considered separate performance obligations because the
manufacturer regularly sells the services such as engineering and construction
services based on third-party designs on a standalone basis.
However, because of the relationship between design and construction (i.e., the
two phases are highly interrelated), the manufacturer determines that these
goods and services represent a single distinct performance obligation. This is
supported by the significant customization and modification of the design and
construction services required to fulfill the obligation under the contract.
However, the manufacturer concludes that the maintenance phase of the
arrangement is not highly interrelated with the design and construction services,
and that phase is a separate performance obligation.
Scenario B
The 10 aircraft are based largely on an existing platform with only limited design
changes expected. The manufacturer does not believe there will be significant
redesign in the construction phase given its history with the platform. Although
the construction depends on the design, the design does not depend on the
construction. Further, the design services and construction services are fulfilled
with separate resources.
The manufacturer concludes that the design and construction phases are not
highly interrelated. Because the proposal would require goods and services to be
both highly interrelated and significantly customized or modified to be treated as
a single performance obligation, the design and construction phases would each
be accounted for as separate performance obligations.
Further, the manufacturer would likely determine that each of the 10 aircraft
represents a distinct performance obligation.
The manufacturer concludes that the subsequent maintenance of the aircraft
would not be bundled with the design or construction phases of the contract. The
subsequent maintenance activities are not highly interrelated with the design and
construction phases. Therefore, all three phases would be treated as separate
performance obligations.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
9 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
How we see it Applying this proposed guidance would require entities to assess potential
performance obligations at a lower level than is currently required and may
result in the identification of multiple performance obligations for each contract.
In the A&D industry, it is common for arrangements to require a contractor to
manufacture many components and perform a variety of tasks to deliver an
overall system solution. In such cases, the goods and services may represent a
bundled solution or several distinct performance obligations. Understanding the
relationship of the deliverables within the arrangement to one another as well as
the level of customization involved in the ultimate deliverable would be critical.
Significant judgment would be required.
Customer options for additional goods or services
It is common for contracts to allow customers to exercise options to obtain
additional goods or services. Under the proposal, if an option provides a material
right to the customer, it would be considered a separate performance obligation. A
material right would include a significant incremental discount on the goods or
services not otherwise available to the customer. If an entity determines that an
option does not provide a material right to the customer, the option would be
considered a marketing offer and not a separate performance obligation. An entity
that determines that an option is a separate performance obligation would have to
determine the separate standalone selling price (discussed further below) of the
option, taking into consideration the discount the customer would receive and the
likelihood the customer will exercise the option. A portion of the transaction price
would then be allocated to the option.
Current US GAAP also contemplates combining options with the existing contract if
the discount is significant and is incremental both to the range of discounts
reflected in the pricing of other elements in that contract and to the range of
discounts typical in comparable transactions. Therefore, while the concept of
accounting for an option that provides the customer with a material right would not
be a change from current guidance, the proposal may change how much of the
transaction price should be allocated to that option.
The proposal would require entities to identify and allocate arrangement
consideration to an option on a relative standalone selling price basis, which is
consistent with current US GAAP. However, the proposal also provides an
alternative treatment for options when there is no observable standalone selling
price. Under the alternative, the entity would estimate the transaction price by
including any consideration related to the optional goods or services, then
allocating that transaction price to all of the goods and services (including those
under option).
Step 3: Determine the transaction price The proposal defines the transaction price as “the amount of consideration to which
an entity expects to be entitled in exchange for transferring promised goods or
services to a customer, excluding amounts collected on behalf of third parties (for
example, sales taxes).” In many cases, the transaction price is readily determined
A contractor’s accounting
for options to purchase
additional goods or
services may change
under the proposal.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
10 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
because the entity receives payment at the same time it transfers the promised
goods or services and the price is fixed. Determining the transaction price may be
more challenging when it is variable in amount, when payment is received at a time
different from when the entity provides goods or services or when payment is in a
form other than cash. Consideration paid or payable by the vendor to the customer
also may affect the determination of transaction price.
It is important to note that the current proposal contains certain significant changes
from the 2010 ED. First, the proposal would no longer require collectibility to be
considered when determining the transaction price. Additionally, while the time
value of money would have to be considered in an arrangement, the Boards tried to
reduce the number of contracts to which that provision would apply. In the current
proposal, the time value of money would be considered only when there is a
significant financing component in an arrangement. In addition, an entity would not
be required to assess whether the arrangement contains a significant financing
component unless the period between the customer’s payment and the entity’s
satisfaction of the performance obligation is greater than one year. The Boards also
clarified that they do not believe contract retainage provisions (that is, amounts
withheld by the customer from invoices to ensure performance through
completion), which are common in the A&D industry, are financing components.
Step 4: Allocate the transaction price Once the performance obligations are identified and the transaction price has been
determined, the proposal would require an entity to allocate the transaction price
to the performance obligations, generally in proportion to their standalone selling
prices (i.e., on a relative standalone selling price basis). As a result, any discount
within the contract would generally be allocated proportionally to all of the separate
performance obligations in the contract.
However, there would be some exceptions. For example, the proposal contemplates
the allocation of any discount in an arrangement to only one or some of the
performance obligations if certain criteria are met. This provision is meant to replace
the segmenting provision that was removed from the 2010 ED. Specifically, the
current ED would allow an entity to allocate a discount inherent in a bundle of goods
and services to an individual performance obligation (or smaller bundle of goods and
services) when the pricing of that good or service is largely independent of others in
the contract. That is, an entity would be able to effectively “carve off” an individual
performance obligation and allocate a discount to that performance obligation if the
entity determines the discount is specific to that good or service. The ED states that
the price of goods and services would be largely independent of other goods and
services in the contract when both of the following criteria are met:
• The entity regularly sells each good or service (or each bundle of goods or
services) in the contract on a standalone basis.
• The observable selling prices from those standalone sales provide evidence of the
performance obligation(s) to which the entire discount in the contract belongs.
However, it is not clear how this guidance would be applied if the bundle of goods
and services has a discount larger than the amount attributed to certain goods
and services.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
11 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
Illustration 5 — Allocating discounts
A government contractor enters into an arrangement with a customer to
implement an off-the shelf software package, which will include the delivery of
hardware, peripherals and servers for total consideration of $1,450,000. The
hardware, peripherals and servers will be delivered at or near inception of the
arrangement. The software and implementation services will be delivered
approximately three months later.
The contractor regularly sells the hardware, peripherals and services separately,
and the off-the-shelf software and implementation services are often sold as a
bundle.
The package price and standalone selling prices of each good or service are as
follows:
Item Standalone selling price
Price when bundled
Bundling discount
Implementation services $ 150,000 $ 975,000 $ 75,000
Off-the-shelf software 900,000
Computer hardware 125,000 125,000 —
Peripherals 75,000 75,000 —
Servers 275,000 275,000 —
$ 1,525,000 $ 1,450,000 $ 75,000
Due to the timing of delivery, the contractor chooses to account for three
performance obligations — all items delivered up front (hardware, peripherals,
and servers) — as a single performance obligation, and the software and
implementation services as two other performance obligations.
Because the contractor regularly bundles the software and services and sells
them on a combined basis at a $75,000 discount, the contractor has observable
evidence that the $75,000 discount inherent in the package is attributable to the
bundle. Therefore, the contractor would allocate 100% of the discount to the
bundle, as shown:
Allocated amounts
Software and implementation services bundle $ 975,000
Hardware, peripherals and servers 475,000
Total $ 1,450,000
This example assumes the discount for the larger bundle of goods and services is
exactly equal to the discount for a bundle ($75,000). It is unclear how an entity
would treat a discount of more than $75,000 for the larger bundle. For example,
if the discount on the larger bundle totaled $125,000, it is unclear whether
$75,000 would be allocated to the bundle and the remainder would be allocated
to the other three items or whether the entire $125,000 discount would be
allocated to all of the performance obligations based on the relative standalone
selling prices (i.e., the entity would not be able to use the exception to allocate a
discount to only certain performance obligations as discussed above).
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
12 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
How we see it The proposed guidance on allocating the transaction price is similar to the
current guidance in ASC 605-25. While ASC 605-35 provides guidance on
contract separation, that guidance does not address allocation of arrangement
consideration. In practice, separately negotiated prices for contract components
are generally used as the value of separated contract elements. The proposal,
which would require allocation based on a relative standalone selling price
method, could result in a significant change in practice.
The proposed requirement to allocate discounts to a single performance
obligation (as illustrated above) would be a significant change from current
practice. However, we do not believe many companies in the A&D industry
would meet the criteria due to the prevalence of customized solutions in
contracts. Companies that provide goods or services under a General Services
Administration (GSA) schedule, however, may be affected by this requirement.
Step 5: Satisfaction of performance obligations Under the proposal, an entity would recognize revenue only when it satisfies a
performance obligation by transferring a promised good or service to a customer. A
good or service is generally considered to be transferred when the customer
obtains control. The ED states that “control of an asset refers to the ability to direct
the use of and obtain substantially all of the remaining benefits from the asset.”
Control also includes the ability to prevent other entities from directing the use of
and receiving the benefit from a good or service.
The proposal indicates that certain performance obligations are satisfied as of a
point in time and revenue would be recognized at that point in time. Other
performance obligations are satisfied over time, and the associated revenue would
be recognized over the period the performance obligation is satisfied. Constituents
had raised concerns that the 2010 ED did not adequately address the concept of
control transferring over time and could have forced many arrangements to be
treated as if control transferred at a point in time. In the 2011 ED, significant
changes have been made to address these concerns.
Performance obligations satisfied over time
Frequently, entities transfer promised goods and services to the customer over
time. While the determination of whether goods or services are transferred over
time is straightforward in some arrangements (e.g., many service contracts), the
Boards acknowledged that it was more difficult in many other arrangements. To
help entities determine when control transfers over time (rather than at a point in
time), the Boards provided the following guidance:
• The entity’s performance creates or enhances an asset (such as work in
process) that the customer controls as the asset is created or enhanced. For
example, contracts with the US Government frequently provide that the US
Government takes title to items produced as the work is performed.
Many performance
obligations in A&D
arrangements would likely
meet the proposed
criteria for recognizing
revenue over time.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
13 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
• The entity’s performance does not create an asset with an alternative use to
the entity (for example, if the contract includes provisions that prevent the
transfer of the goods and services to another party) and at least one of the
following criteria is met:
• The customer simultaneously receives and consumes the benefits of the
entity’s performance as the entity performs (for example, training provided
to government employees).
• Another entity would not need to substantially re-perform the work
the entity has completed to date if that other entity were to fulfill the
remaining obligation to the customer (for example, transporting goods
for the government).
• The entity has a right to payment for performance completed to date, and
it expects to fulfill the contract as promised. The right to payment for
performance completed to date does not need to be for a fixed amount.
However, the entity must be entitled to an amount that is intended to at
least compensate the entity for performance completed to date even if the
customer can terminate the contract for reasons other than the entity’s
failure to perform as promised. For example, it is common for
arrangements in the A&D industry to include provisions that permit the
government to terminate the contract and take possession of any work in
process with payment to the entity for performance completed to date.
We believe that many of the arrangements in the A&D industry, and in particular
those with the US Government (under the Federal Acquisition Regulation (FAR))
would be considered contracts where performance obligations are satisfied over time.
How we see it All performance obligations would need to be carefully evaluated to determine
whether they are satisfied over time. We believe many of the performance
obligations within arrangements currently accounted for under ASC 605-35
would meet the proposed criteria to recognize revenue over time rather than at
a point in time.
Measurement of progress
Revenue for a performance obligation satisfied over time would be recognized “by
measuring the progress toward complete satisfaction of that performance
obligation.” The objective is to reflect the entity’s performance under the contract,
similar to existing US GAAP. The proposal specifically identifies both output and
input measures as acceptable measures of progress. This is similar to existing
US GAAP under ASC 605-35, which says output measures are “preferable” but
inputs are acceptable. But this would be a change from existing practice on “service
contracts” under Staff Accounting Bulletin (SAB) Topic 13, Revenue Recognition,
which generally leads companies to use output measures. Also, similar to existing
US GAAP, the proposal would require an entity to have the ability to make
reasonable estimates and to apply completeness measurements in the same
manner across similar contracts to recognize revenue prior to completion.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
14 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
The proposal provides examples of output measures, which are consistent with
existing guidance in ASC 605-35.1 Further, the proposal specifically indicates that
entities entitled to invoice a customer based on performance (e.g., service
contracts under time-and-materials arrangements) should recognize revenue as
such amounts are billable because the amounts billed reflect an output method.
The proposal also addresses input measures. One key element is that the use of
input measures would not include any measurement that does not depict the
transfer of goods or services to the customer. This concept would apply in the A&D
industry to the up-front purchase of materials on a long-term construction contract.
While such costs are directly related to the contract, they would not be included in
the measurement toward completion until the materials have been integrated into
the final product.
Unlike the guidance in ASC 605-35, the proposal indicates no preference for
output measures over input measures, but does clarify that the selected method
would be consistently applied to similar arrangements containing similar
performance obligations.
Illustration 6 — Measuring progress
This is a continuation of Illustration 4 above. Assume that the contract allows the
customer to take title to the work in progress as it is being performed and also
provides that the manufacturer is entitled to payment for efforts to date if the
contract is terminated.
Scenario A
As discussed above, the manufacturer determined that the design and
construction phases represent a single performance obligation. Because the
manufacturer expects that there will be significant design efforts, there will likely
be an extended period of time before it delivers any of the 10 promised aircraft.
Given the contractual clause of title passing to the customer, the manufacturer
determines that transfer of this combined performance obligation happens
continuously. Therefore, the manufacturer has to select the appropriate measure
of progress. However, the manufacturer would likely not choose a “units of
delivery” method as a measure of progress because that method would not
capture accurately the level of performance and would exclude its efforts during
the design phase. In such situations, the manufacturer would likely determine that
an input method, such as a “cost-to-cost” approach, is more appropriate.
Scenario B
In this scenario, the manufacturer determined the design and construction
phases would each be accounted for as separate performance obligations.
Further, the manufacturer would likely determine that each of the 10 aircraft
represents a distinct performance obligation.
Therefore, the manufacturer would have to determine the appropriate method for
measuring progress for the identified performance obligations. For example, the
manufacturer may conclude that an input measure such as the number of direct
labor hours incurred is the best measure of progress for the design services.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
15 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
Illustration 6 — Measuring progress (continued)
For the aircraft, the manufacturer may determine that an output method, such
as units of delivery, is the best measure of progress for those performance
obligations. Alternatively, the manufacturer may determine that an input method
such as a “cost-to-cost” approach is the best measure of progress.
How we see it As illustrated in Scenario A above, the proposal may require entities in the A&D
industry to use an input method, such as a “cost-to-cost” approach, to best
depict the continuous transfer of goods and services. This could be a significant
change from current practice. Many entities today use a “units of delivery
method” (that is, an output method) to measure progress on contracts where an
output can be clearly identified. A “units of delivery” method may not be a
reasonable measure of an entity’s progress toward complete satisfaction of a
performance obligation in an arrangement where significant design services
have been bundled with production and delivery of tangible goods.
Bill-and-hold arrangements
Certain sales transactions may result in the entity fulfilling its obligations and billing
the customer for the work performed but not shipping the goods until a later date,
typically at the request of the customer due to a lack of storage capacity or delays
in the customer’s ability to use the goods.
Under the proposal, the entity would evaluate whether the customer has obtained
control of the goods to determine whether the performance obligation has been
satisfied and revenue should be recognized. Because the customer has not taken
possession of the goods, the proposal includes certain criteria for bill-and-hold
arrangements that are largely consistent with current US GAAP, but is slightly less
prescriptive. Specifically, the proposed guidance does not include the current US
GAAP requirements that the customer must request that the entity retain the
goods and that the arrangement must include a fixed delivery schedule.
Accordingly, we expect that most bill-and-hold arrangements that would qualify for
revenue recognition under current US GAAP would also qualify for revenue
recognition under the proposal.
Other measurement and recognition topics
Onerous performance obligations
The proposal requires an entity to recognize a liability and a corresponding expense
when certain performance obligations (that is, performance obligations satisfied
over time and that period is greater than one year) become onerous.
It is important to note that the proposal would require the measurement of a loss
for an onerous performance obligation at the performance obligation level rather
than at the contract level, as currently required by ASC 605-35. While some
entities would bundle the performance obligations in an arrangement into a single
unit of account, the proposal would represent a change from current practice for
entities that identify multiple performance obligations in an arrangement. Refer to
Section 7.2 in our general Technical Line for further discussion.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
16 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
Variable or contingent fees
The 2010 ED proposed significantly changing current practice by requiring entities
to estimate the expected amount of award fees (and any other contingent fees) to
be received under the contract using a probability-weighted approach. Many
constituents raised concerns about this aspect of the proposal. As a result, the
Boards modified the proposal to require an estimate of the amount of variable
consideration to be made using either the “expected value” or the “most likely
amount” approach, whichever better predicts the ultimate consideration to which
the entity will be entitled. Each of these methods is discussed further in Section 4.1
of our general Technical Line.
The proposed guidance states that in applying either of the approaches, an entity
would consider all of the information (historical, current and forecasted) that is
reasonably available. While the Boards did not explicitly state this in the ED, they
appear to presume that an entity will always be able to estimate anticipated
amounts of variable consideration. Nonetheless, an entity would recognize variable
consideration only if it is “reasonably assured,” meaning that the entity has
experience with similar arrangements and the entity’s experience can be used to
predict the amount the entity will be entitled to in exchange for satisfying its
performance obligations.
How we see it We believe that the proposed guidance on variable consideration would not
significantly change existing US GAAP for government contractors that apply
ASC 605-35. However, the proposed guidance represents a significant change
from the guidance in SAB Topic 13, which generally prohibits recognition of
variable amounts without objective evidence that such fees have been earned.
Contract costs
The proposal would provide guidance on the accounting for an entity’s costs
incurred in obtaining and fulfilling a contract to provide goods and services to
customers for both contracts obtained and contracts under negotiation. Costs of
obtaining a contact would be capitalized if they are incremental and expected to be
recovered under the contract.
Costs to fulfill a contract that do not qualify for capitalization in accordance with
other authoritative literature (such as ASC 330 on inventory, ASC 360 on property,
plant and equipment or ASC 985 on software) would be capitalized only if they
meet all of the following criteria:
• The costs relate directly to a contract or a specific anticipated contract, which
could include direct labor, direct materials, allocations of costs that relate
directly to the contract, costs that are explicitly chargeable to the customer
under the contract and other costs that were incurred only because the entity
entered into the contract (for example, subcontractor arrangements).
• The costs will generate or enhance resources that will be used in satisfying
performance obligations in the future.
• The costs are expected to be recovered.
The proposal would
require contractors to
estimate and recognize
variable consideration.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
17 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
All other costs would be expensed as incurred, including costs of wasted materials,
labor or other resources to fulfill the contract that were not reflected in the price of
the contract.
Under ASC 605-35, government contractors generally capitalize certain indirect
costs within inventory. Under the proposal, we believe the indirect costs may
continue to be capitalized if they are explicitly chargeable to the customer or
represent the allocation of costs that relate directly to contract activities. Similarly,
we would not expect the proposed guidance to affect the treatment of pre-contract
costs that are determined to be recoverable.
Negative trends in estimated costs and margins for fixed-price contracts, however,
would be evaluated under the proposal to determine whether these are costs of
wasted materials that should be expensed as incurred. This would likely represent a
change from current practice because most entities include negative trends in total
estimated costs as long as the overall arrangement has sufficient margin to absorb
the cost increases.
Amortization of capitalized costs
The proposal would require costs capitalized in accordance with the guidance above
to be “amortized on a systematic basis consistent with the pattern of transfer of the
goods or services to which the asset relates.” The proposal says, however, that
certain capitalized costs may relate to multiple goods and services (for example,
design costs). For these costs, the amortization period could extend beyond a single
contract if the capitalized costs relate to goods or services being transferred under
multiple contracts, or if the entity expects the customer to continue to purchase
goods or services after the stated contract period.
Learning curve
Learning curve costs may include additional labor hours incurred and materials
consumed for the initial lots of new programs. In the A&D industry, the effect of
learning curves is often reflected in the transaction price of any long-term supply
arrangement and typically represents allowable costs under current federal
regulations for cost reimbursement.
Under the proposal, when an entity has a single performance obligation to deliver a
specified number of units or when the performance obligation is satisfied over time,
an entity would select a measure of progress that depicts the transfer of goods and
services to the customer. That is, an entity likely would select a method that
recognizes more revenue and more expense for the early units produced (e.g., a
“cost-to-cost” approach). This is appropriate because an entity would likely charge
a customer more if it had a contract to deliver only one unit.
However, when an entity’s promise to deliver a specified number of units is not
deemed to be a single performance obligation, those costs would have to be
accounted for under another standard (such as ASC 330 on inventory). That is, if a
performance obligation is not being satisfied over time, the entity likely is creating
an asset that would be in the scope of other standards. The Boards acknowledged
diversity in practice in the accounting for the costs of products produced under
long-term production programs, and agreed to consider adding a project to their
agenda at a future time.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
18 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
Disclosures The ED proposes significant changes to existing disclosure requirements. The
Boards’ overall objective was to create disclosures that would enable users of the
financial statements to understand the “nature, amount, timing and uncertainty of
revenue and cash flows arising from contracts with customers.” The proposed
disclosures are both qualitative and quantitative in nature and would require
companies to discuss estimates and judgments at greater length in the notes to
their financial statements. Companies in the A&D industry may need to develop new
processes and systems to track the detailed information that would be required by
the proposal.
The ED does not provide implementation guidance or supplemental information on
the depth of disclosure required to fulfill the overall disclosure objective. Therefore,
companies likely would have to exercise significant judgment when preparing the
proposed disclosures.
Disaggregation of revenue
The proposal would require additional disclosure of disaggregated revenue on an
interim and annual basis and provides categories that may be appropriate to meet
the overall disclosure objective. The examples include the following:
• Type of goods or services
• Geography in which goods or services are sold
• Market or type of buyer, such as government versus private sector
• Type of contract, such as fixed-price, time-and-materials and cost-plus
• Duration of the contract
• Timing of transfer of the goods or services
• Sales channels
How we see it We believe A&D companies would use several of the categories proposed in the
ED because their contract type, contract duration and types of goods and
services vary significantly. For example, a company might provide heavy
machinery, software solutions and health care consulting services.
Satisfaction of performance obligations
For contracts with an original expected duration greater than one year, the
proposal would require a public entity to provide additional disclosure of the
transaction price allocated to remaining performance obligations and an
explanation of when the entity expects the amount(s) to be recognized as revenue.
The proposed disclosures can be provided quantitatively using “time bands” or with
a combination of qualitative and quantitative information. Refer to Illustration 8-3
in our general Technical Line for an example.
Complying with the
proposed disclosure
requirements could be
challenging for A&D
companies.
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
19 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
The ED also provides a practical expedient, which would allow an entity to omit
this disclosure requirement for cost reimbursable and time-and-materials contracts.
An example would be a services contract in which an entity has a right to invoice
the customer a fixed amount for each hour of service provided as specified in
the contract.
How we see it The proposed disclosure requirement would represent a significant change for
almost all A&D companies. The proposed requirement to disclose future
revenues and the expected timing of satisfaction of performance obligations
could require significant estimates to be made at a very granular level and then
aggregated into judgmental “time bands.” We believe that this proposed
disclosure, which would be required in the footnotes to the financial statements,
is similar to the current disclosure requirements in Management’s Discussion &
Analysis (MD&A) on backlog. However, the proposed disclosures would require
discussion about the forecasted realization and timing of that backlog. Given the
current diversity in practice on backlog calculations, we believe the proposed
disclosure would present a significant challenge for contractors.
Federal government contract accounting and compliance It is not possible to predict with certainty how the Cost Accounting Standards Board
(CASB) or the Federal Acquisition Regulation (FAR) Council, both of which govern
government contracting submissions, would react to any measurement differences
that may result from adopting the proposal. Government contractors that change
their methods of cost allocation based on the proposal would have to show that
such changes are preferable and consistent with Cost Accounting Standards (CAS).
However, there is substantial risk of negative or inconsistent government response
to any changes in allocation based on the proposal. Contractors should assess the
potential effect on contract accounting and consider discussing this with regulators
and contract oversight officials.
Regulatory framework
The US Government has developed increasingly detailed and complex rules about
acceptable costs (allowability) and methods of allocating those costs (allocability).
These rules are primarily contained in the FAR and CAS. As this regulatory
framework has evolved, regulatory authorities have often looked to GAAP in
developing policy. In some cases, however, they have determined that the
objectives of financial accounting and procurement policy (or national policy as
determined by Congress) are different. Consequently, differences currently exist
between the requirements of financial accounting and government contract
accounting. These accounting differences are typically addressed by using
memorandum records. Addressing these differences during a transition to the
proposed accounting could present challenges for regulators and contractors.
Changes to cost accounting practices under CAS
The methods adopted by a contractor to measure and allocate costs are defined as
cost accounting practices under the CAS. Before a contractor changes a cost
accounting practice, certain steps must be followed. If the change in cost
accounting practice is not required to comply with the CAS, contractors must notify
Ernst & Young AccountingLink
www.ey.com/us/accountinglink
20 1 February 2012 Technical Line The revised revenue recognition proposal — aerospace and defense
the government of the proposed change, provide an estimate of the cost impact
and negotiate any price or billing adjustments with the government. The allocation
of residual home office expenses in CAS 4032 is one example of a cost accounting
practice under the CAS that could be affected by adopting the proposal (because
revenue is one of the specified components in the three-factor formula used to
allocate costs). Whether the government will accept increased costs resulting from
a change depends on how the change is classified.
Contractors should carefully assess the potential effect of any changes to costs
resulting from the proposal to decide whether the need for the change outweighs
the adverse consequences if the change is processed as a unilateral change.
How we see it In determining whether to change their current cost accounting practices as a
result of the proposal, contractors would need to carefully assess the change
and determine whether it would be considered desirable. Contractors should
proactively address these issues.
Next steps • Entities in the A&D industry should apply the proposal to their common
transactions to identify any situations in which the accounting does not
appear to reflect the substance of a transaction and to identify potential
implementation issues, and communicate those issues to the Boards.
• Many preparers have expressed concerns about the proposed disclosure
requirements. We believe the Boards need detailed feedback from preparers
on the cost and benefits of preparing these disclosures and their overall
usefulness to users of the financial statements.
• Comments are due by 13 March 2012.
Endnotes:
1 ASC Subtopic 605-35, Revenue Recognition — Construction-Type and Production-Type Contracts 2 Cost Accounting Standard (CAS) 403, Allocation of Home Office (Headquarters) Expenses to Segments
Ernst & Young
Assurance | Tax | Transactions | Advisory
© 2012 Ernst & Young LLP.
All Rights Reserved.
SCORE No. BB2272
About Ernst & Young
Ernst & Young is a global leader in assurance, tax, transaction and advisory services. Worldwide, our 152,000 people are united by our shared values and an unwavering commitment to quality. We make a difference by helping our people, our clients and our wider communities achieve their potential.
Ernst & Young refers to the global organization of member firms of Ernst & Young Global Limited, each of which is a separate legal entity. Ernst & Young Global Limited, a UK company limited by guarantee, does not provide services to clients. For more information about our organization, please visit www.ey.com.
This publication has been carefully prepared but it necessarily contains information in summary form and is therefore intended for general guidance only; it is
not intended to be a substitute for detailed research or the exercise of professional judgment. The information presented in this publication should not be
construed as legal, tax, accounting, or any other professional advice or service. Ernst & Young LLP can accept no responsibility for loss occasioned to any
person acting or refraining from action as a result of any material in this publication. You should consult with Ernst & Young LLP or other professional advisors
familiar with your particular factual situation for advice concerning specific audit, tax or other matters before making any decision.