TECHNICAL DRAWINGS FOR STRUCTURAL METAL WORK
Structural metal work (SMW) specifies complementary rule to general principles of presentation and dimensioning necessary for assembly and detail drawings .
SMW consisting of plates and sheets , profile section and compound elementsLifting and transport appliances;Storage tanks and pressure vessels;Lifts , moving stairways and conveyor belts;Etc.;
REFERENCE : SP46
Representation of Holes, Bolts and Rivets Representation on projection planes normal to their axes
-in order to represent holes ,bolts and rivets on projection planes normal to their axes, the symbols represented in thick lines, shall be used.
Representation of holes, bolts and rivets
Hole RepresentationRepresentation on projection planes parallel to their axes
Only horizontal line representing the symbol is thin line, all other lines are thick
Bolts or rivet to fit in hole
The projection lines shall be separated from the symbols of holes, bolts and rivets on projection planes parallel to their axes
Dimensioning
Dimensioning and lengths of arcsat the side of the developed lengths of arcs,
the bending radius to which these lengths refer shall be indicated in brackets
Dimensioning of bars, profiles section, plates and sheets
Plates and sheets -
Plates and sheets shall be designated by their thickness followed by the overall finished dimensions of the enclosing rectangle .
symbols for bars and profile sections
Symbolic representations and their significance
Bars and profile sections
Diagrammatic representation
Structural metal work can be repeated diagrammatical lines of the intersecting elements.
In this case, the values of the distance between the reference point of the centroidal lines shall be indicated directly on the represented elements.
Diagrammatic representation –structural metal work