Platinum QualityThe Taipan ‘Platinum’ status is reserved for only the
very best abrasive products, offering unbeatableperformance and wear life.
Extra Fine... EXTREMELY FAST!The extra-fine cutting disc Razor-Cut AS 60with a thickness of 1.0mm (.035’) or1.2mm (.045”) is the right choice for cuttingthin-walled profiles and pipes, thin sheetsand ropes. The extra-smooth cutting disc ischaracterized by its fast and smooth cutting
with low contact pressure.
Extra Fine... EXTREMELY FAST!Look for our RED LIFETIME-PLUS freshness seal!
• Discs come packaged in 25s in convenient, stackable, durable steel tins
• Sizes 4-1/2” and 5” discs only
• Over 30% * more service-life (number of cuts)
• Stops the natural aging process of synthetic resin-bonded discs
• Keeps cutting discs fresh until the pack is opened for the first time
TO-6550 5” x .045” x 7/8” Depressed 12,250 1-TCPRD125X12A 25
PART# SIZE IN. TYPE RPM ARTICLE# QTY
Aluminum Cutting Discs • Razor Cut • Platinum
TP-6002 4-1/2” x .035” x 7/8” Flat 13,280 1-TCPRF115X10 25
TP-6004 5” x .035” x 7/8” Flat 12,200 1-TCPRF125X10 25
TP-6006 4-1/2” x .045” x 7/8” Flat 13,280 1-TCPRF115X12 25
TP-6008 5” x .045” x 7/8” Flat 12,200 1-TCPRF125X12 25
TP-6010 6” x .045” x 7/8” Flat 10,200 1-TCPRF150X12 25
TP-6012 4-1/2” x .045” x 7/8” Depressed 13,280 1-TCPRD115X12 25
TP-6014 5” x .045”x 7/8” Depressed 12,200 1-TCPRD125X12 25
TP-6016 6” x .045” x 7/8” Depressed 10,200 1-TCPRD150X12 25
TP-6018 7” x .062” x 7/8” Depressed 8,600 1-TCPRD180X12 25
PART# SIZE IN. TYPE RPM ARTICLE# QTY
Cutting Discs • Razor Cut • PlatinumAS60-T-INOX
ALUMINUMSTAINLESSSTEEL
ALUMINUM
Features: This best-seller has a brilliant price/performance ratio and has proven itselftime and again. The Original line shows best results on every angle grinder. Professionaluse in every application demands the right disc, thereforeabrasive grits and bonds exactly match the material.This increases performance and minimizesworking time.
Notching/Grinding Discs Original A60-QBF
TO-6100 4” x 3/32” x 5/8” 15,300 25TO-6102 4-1/2” x 3/32” x 7/8” 13,300 25TO-6104 5” x 3/32” x 7/8” 12,250 25TO-6106 6” x 3/32” x 7/8” 10,200 25TO-6108 7” x 3/32” x 7/8” 8,500 25TO-6110 4” x 1/8” x 5/8” 15,300 25TO-6112 4-1/2” x 1/8” x 7/8” 13,300 25TO-6114 5” x 1/8” x 7/8” 12,250 25TO-6116 6” x 1/8” x 7/8” 10,200 25TO-6118 7” x 1/8” x 7/8” 8,500 25TO-6120 4” x 1/4” x 5/8” 15,300 25TO-6122 4-1/2” x 1/4” x 7/8” 13,300 25TO-6124 5” x 1/4” x 7/8” 12,250 25TO-6126 6” x 1/4” x 7/8” 10,200 25TO-6128 7” x 1/4” x 7/8” 8,500 25
PART# SIZE IN. RPM QTY
STAINLESSSTEEL
• Resin bonded
• Reinforced with glass fibre
• Good lifetime
• Good removal rate
• Good for steel and stainless steel
• Contaminant-free
Original Quality:The Taipan Original series is abase range of industrialabrasives delivering safe,reliable, quality and goodvalue. Our everydayworkhorse product line.
• Flexible grinding
• Consistant finish
• Cooler grinding
• Longer lasting Ceramic material
• Trimable backing means longer life and product usage
TP-5200 5” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #40 12,250 10
TP-5202 5” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #60 12,250 10
TP-5204 5” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #80 12,250 10
TP-5206 5” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #120 12,250 10
TP-5208 6” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #40 10,200 10
TP-5210 6” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #60 10,200 10
TP-5212 6” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #80 10,200 10
TP-5214 6” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #120 10,200 10
TP-5216 7” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #40 8,500 10
TP-5218 7” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #60 8,500 10
TP-5220 7” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #80 8,500 10
TP-5222 7” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #120 8,500 10
PART# SIZE IN. DESCRIPTION GRIT RPM QTY
Ceramic Razor Flap Discs • PlatinumSTEEL STAINLESS ALUMINUM
• Easy and fast mounting of disc by special made 5/8 -11center • Threaded plastic hub –5/8-11” • The best quality paper material
• Easy and fast mounting of disc by special made 5/8 -11center
• Comfortable application due to flexible structure
• 2 different process applications using the same disc
• 2 different grit sizes on the same disc
• Multi-choice possibility of different grits on the same disc
• Economical: lower price than buying two separate discs
• Various operation abilities on different work pieces and materials because of the various combinations possible
Visit our website to see a videodemonstration of the
EXCLUSIVE TwinFlap Disc!
STEEL STAINLESS ALUMINUM
Twin-Flap Discs • Platinum
TP-5830 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/40 10 TP-5832 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/60 10TP-5834 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/80 10TP-5836 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/120 10TP-5838 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 60/60 10TP-5840 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 60/80 10TP-5844 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 80/80 10TP-5846 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 80/120 10TP-5848 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 120/120 10TP-5850 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/40 10TP-5852 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/60 10TP-5854 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/80 10TP-5856 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/120 10TP-5858 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 60/60 10TP-5860 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 60/80 10TP-5862 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 60/120 10TP-5864 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 80/80 10TP-5866 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 80/120 10TP-5868 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 120/120 10
PART# SIZE IN. TYPE GRIT QTY
Features:
These stringer bead wire wheelbrushes for angle grinders are
made from quality wirethat is knotted, and
each tuft ispreciselypositioned andset for perfectbalance andvibration-freeoperation. Improved construction
ensures maximum operator safety andfast material removal.
• Fast removal
• Perfect balance
• Vibration-free
• Best quality wire
• Ideal for pipeline weld/bead cleaning
TO-3602 Stringer Bead 5” 5/8-11” Thread Twist-Knot Stainless Steel 12,500 10TO-3604 Stringer Bead 6” 5/8-11” Thread Twist-Knot Stainless Steel 12,500 10
PART# DESCRIPTION SIZE TYPE RPM QTYStainless Steel String Bead Brushes - 1/4” Face Width
STAINLESS
TO-3002 Stringer Bead 5” - 1/4” Face 5/8-11”Thread Twist-Knot Steel 12,500 10TO-3004 Stringer Bead 6” - 1/4” Face 5/8-11” Thread Twist-Knot Steel 12,500 10TO-3012 Knot Wheel 6” - 1/2” Face HD 5/8-11” Thread Twist-Knot Steel 12,500 10TO-3008 Knot Wheel 5” - 1/2” Face 5/8-11” Thread Twist-Knot Steel 12,500 10 TO-3006 Knot Wheel 6” - 1/2” Face 5/8-11” Thread Twist-Knot Steel 12,500 10TO-3010 Knot Wheel 6”- 7/8” - 1/2” Face HD 5/8-11” Thread Twist-Knot Steel 12,500 10TO-3024 Cup Brush 2 - 3/4” 5/8-11” Thread Crimped Brass-Coated Steel 14,000 10TO-3022 Cup Brush 2 - 3/4” 5/8-11” Thread Twist-Knot Steel 14,000 10TO-3020 Cup Brush 3 - 1/2” 5/8-11” Thread Twist-Knot Steel 9,000 10TO-3018 Cup Brush 5” 5/8-11” Thread Twist-Knot Steel 9,000 10TO-3016 Cup Brush 6” 5/8-11” Thread Twist-Knot Steel 6,000 10
PART# DESCRIPTION SIZE TYPE RPM QTY
Stringer Bead Brushes, Knot Twist Wheels & Cup BrushesSTEEL
TO-3028 Bevel/Saucer 4-1/2” - 45º Working Angle 5/8-11” Thread Twist-Knot Steel 12,500 1TO-3614 Bevel/Saucer 4-1/2” - 45º Working Angle 5/8-11” Thread Twist-Knot Stainless Steel 12,500 1TO-3014 Knot End 1-1/8” 1/4” Shaft Twist-Knot Steel 20,000 1TO-3606 Knot End 1-1/8” 1/4” Shaft Twist-Knot Stainless Steel 20,000 1
PART# DESCRIPTION SIZE TYPE RPM QTY
Bevel/Saucer & Knot End Brushes
TO-3206 4-Row Yellow Handle Carbon Steel - Straight 0.35mm 12 120TO-3208 4-Row Yellow Handle Stainless Steel - Straight 0.35mm 12 120
PART# ROW HANDLE COLOUR WIRE TYPEHand Brushes
CARTONQTY
BOXQTY
STAINLESSSTEEL
STAINLESSSTEEL
Date: __________________ P.O. #: ___________________
Distributor Sales Contact: ____________________________
SOLD TO: SHIP TO:
CUSTOMER CONTACT: DELIVERY BY:
TEL: FAX:
ETA:
TERMS:
QTY PART# DESCRIPTION UNIT AMOUNT
SUBTOTALS&HSUBTOTALG.S.T.TOTAL
SHIPPING INFO:
THANK YOU FOR YOUR ORDER!
TO-8058 DRILL BIT - “Original” - HSS - M2 HIGH SPEED STEEL - 29 PIECE SET - 1/16” thru 1/2” $119.00
PLEASE QUOTE PROMO CODE TC1301