Sterilization Technology
Sterilization Equipment
HMCHMCEUROPEEUROPE
STERILIZING SIMPLY AND
WELL
2
ALWAYS IN TOUCH
…..because we always
focus on you!
Your partner for innovation, reliability, durability and in the field of sterilization.
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE2
Karin Gabis Processing
Markus SchmittkerSales
YOU
Joachim LauktienDirector
Jan LooseTechnology
Our Customer
HMCHMCHMCHMCYour partner for innovation, reliability, durability and in the field of sterilization.
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HMCHMCHMCEUROPEEUROPE
3
Safety in all areas
Microbiology
Biotechnology
Material Testing
Material Research
Medicine/Pharmaceutics
Research and Development
Environment and Food Technology
4
THE DEVICE SERIES
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE4
HGFor the highest performance and comfort standards
HVIngeniously simple
HMTReliability on the workbench
HMCHMCHMCHMC
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HMCHMCHMCEUROPEEUROPE
5
hg.hmc-europe.euAutomatic opening lidInnovative sealing systemIntegrated rapid coolingHighly effective spent steam condenserExtremely compact design - space savingVacuum
hv.hmc-europe.euCasters for portabilityInnovative, passive sealing systemManual lid lock - one-handed operationQuadruple fail-safe heating system with maximum efficiencyOnly requirement for the setup location: 230 volt outlet
hmt.hmc-europe.euSimple operationSimple feed water replacementAutomatic program executionChamber pressure dependent safety lockLow water interrupt
Innovativ
6
HG SERIES
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE6
Top technologyAll HMC steam sterilizers are produced in modern manufacturing facilities using state of the art technology and are TÜV certified. All devices meet the EC Pressure Equipment Directive and the current European regulations and bear the CE label.
Easy of useThe low loading height and the smooth surface make for easy loading and unloading. There are no obstructing locks or edges on which the baskets could catch.
Innovative
No electronics and no moving parts in the lid, therefore reliable and trouble-free. Maximum service life!
Twice as safeThe locking system is coupled with a pressure and temperature monitoring system. Sensors monitor the lid state. Unintended opening under pressure not possible by design. The opening temperature (important for liquid sterilization) can be preset to between 60-97 °C (temperature dependend lid opening).
Selection criteriaLegal: GLP (IQ, OQ, PQ) Documentation S2 (exhaust air filter) ThermolockApplication: Chamber volume Documentation AccessoriesStructural: Available space Infrastructure Supply/disposalOccupational health Loadmaster/lifting system and safety: TrolleyEconomics: Operating costs Maintenance costs
HMCHMCHMCHMC
7HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HMCHMCHMCEUROPEEUROPE
Illuminated display
The clear, bright membrane display shows all important parameters at a glance and is self-explanatory. Simple menu navigation allows adaptations for customized program.12 programs are available, divided into 4 groups with 3 sub-groups each.
The optimum for each load.
• Sterilization of solids: With fast release of steam• Sterilization of liquids: With variable natural cooling or with rapid cooling for thermolabile materials• Sterilization of liquids: with subsequent reheat cycle• AGAR program: processes AGAR and keeps it ready for use (thermostatic heating)• Timer-controlled program: load in the evening - sterile and ready for removal in the morning down to the minute• Waste sterilization: Mixed load with a low liquid content• Automatic standby operation: Saves energyThe timer function lets you start the program with a turn-on delay in order to have it end at a precisely defined time.
GREEN OPERATION
Insu
lati
ng
jack
et
Grünes Arbeiten
Exhaust air filtration
Spent steam condenser
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPEHMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE8
Spent steam condenserThe innovative spent steam condensation system, highly efficient and matched to the energy and volume, prevents odor and steam pollution. This ensures a pleasant indoor climate in the environment of the device.
Green operationTop-quality materials are used to manufacture the high-tech chambers with a reduced mass.Result is a long service life and short heating and cooling times.Ideal energy efficiency.
Save resources
HMCHMCHMCHMC
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HMCHMCHMCHMCHMCHMCEUROPEEUROPE
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE 9
The HG series: Sophisticated functionality
The HG series devices are divided into working capacities of 50/80/113/133 litres and set standards with regard to comfort and safety.
The user will be pleased by the extremely simple operation using the self-explanatory membrane keyboard with LED program display.
The locking systems for both series consist of a mo-torized lid and an innovative locking system.
The lid opens at the push of a button: first it only opens a safe gap in order to relieve the remaining pressure, then automatically and finally all the way. Unintended opening is impossible. The user is protected against escaping steam.
Starting the program as well as opening and closing of the autoclave chamber are triggered via a single key. The lid is lowered gently and locked automati-cally. The program starts automatically.
The lock operating principles
HG 50/80
The V-seal gasket is activated by pressure. It is embedded in the edge of the lid, and swivelled up and out of the way upon opening to protect it against damage during loading and unloading.
HG/HGS/HGD 113/133
The double V-seal gasket seals equally well against vacuum and pressure. It is embedded flush in the edge of the chamber and therefore protected against damage during loading and unloading.
The seals for both types can be replaced by the user themselves in just a few minutes.
The latest generation Versatile with no compromises
HGD
Steam generator
Jacket heating
Rapid cooling
Vent valve
Demineral-ized water
Tap-water
Steam cooling
Exhaust air
filtration
Vacuum _p ump
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE10
Vent valveVacuum _p ump
Devices with steam generator and vacuum pump coupled directly to the chamber• Passive seal against vacuum and pressure• Dynamic multi-directional inflow of steam• Permanently available steam• Segmented jacket heating• No heating elements in the chamber• Extremely short heating times• Preheating program• Pyrolytic self-cleaning program• Powerful vacuum pump• Extremely short batch times
Effective vacuumPre and drying vacuum for the sterilization of
• Fabrics• Hollow parts• Tubes• Bottles• Pipettes• Glass containers• All open-pore materials• Mixed fractions in waste bags• Filters
Two sizes HGD 113 Chamber volume of 131.7 L Effective useful volume of 113 L
HGD 133 Chamber volume of 153.4 L Effective useful volume of 133 L
DocumentationSimple via USB or printer (can be integrated)
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HGDHGDHGDHGDHGDHGDHGDHGDHGDHGDHGDHMCHMCEUROPEEUROPE
11
HGDHGDHGDHGDHGDHGDEUROPEHGDHGDEUROPEHGDHGDEUROPEHGDHGDEUROPEHGDHGDEUROPEHGDEUROPEHGDEUROPEHGDHGDEUROPEHGDEUROPEHGDEUROPEHGDHGDHGDHGDHGDHMCHGDHGDHMCHGDHGDHMCHGDHGDHMCHGDHMCHGDHMCHGDHGDHGDHGDHGD Technical Data HGD 113 HGD 133
Chamber volume Litres 131,7 153,4
Useful volume Litres 113 133
Chamber dimensions Ø x H mm 500 x 576 500 x 680
Exterior dimensions W x D x H mm 686 x 870 x 930 686 x 870 x 1034
Required space W x D x H mm 700 x 1150 x 1350 700 x 1150 x 1450
Weight kg 184 192
Electrical power kW 6,8 7,1
Integrated steam generator Yes
Vacuum Yes
Allowable operating temperature °C 138°
Selectable operating temperature °C 105° - 135°
Warming temperature °C 45° - 60°
Max. operating pressure bar 2,5
Automatic start variable, 1 minute to 7 days
Sterilization time t variable, 1 to 300 minutes
Power supply V AC 400 V 50/60 Hz 3 phase
Locking system automatic
Markings CE, TÜV Bayern e.V./TÜV Rheinland
Vessel material SUS304 (high-grade stainless steel)
Documentation Integrated printer/USB (optional)
Safety systems Electro-mechanical safety lock, safety valve, low-water interrupt, overpressure protection switch, overheating protection switch,
circuit breaker, fault indicator (visual and audible)
Item Number 21007 21008
Fast and safe!The HGD devices are equipped with the most effective vacuum pump.2 pre-vacuum cycles are sufficient to remove all air and let steam penetrate. This saves time and guarantees the highest level of effectiveness. The duration of the drying phase with fractionated vacuum is adjustable and can therefore be matched individually to the load characteristics.
HGS
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
Steam generator
Demineral-ized water
Tap-water
Vent valve
Steam cooling
Rapid cooling
Jacket heating
Exhaust air
filtration
12
STERILESTERILESTERILESTERILESTERILE
Devices with integrated steam generator• Innovative passive sealing system• Dynamic, multi-directional steam injection • Permanently available steam • Segmented jacket heating • Pre-heating program • Insulating jacket • No heating elements in the chamber • Extremely short heating times • Standard rapid cooling • Pyrolytic self-cleaning program • Automatic water supply
Two sizesHGS 113 Chamber volume of 131.7 L Effective useful volume of 113 L
HGS 133 Chamber volume of 153.4 L Effective useful volume of 133 L
Steam generator• Highly efficient and economical• Compact and directly next to the payload space• No preheating necessary
The latest generation - large and fast
HGSHGSHGSHGS
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HGSHMCHMCEUROPEEUROPE
13
HGSHGSHGSHGS
STERILESTERILESTERILE
HGS Technical Data HGS 113 HGS 133
Chamber volume Litres 131,7 153,4
Useful volume Litres 113 133
Chamber dimensions Ø x H mm 500 x 576 500 x 680
Exterior dimensions W x D x H mm 686 x 870 x 930 686 x 870 x 1034
Required space W x D x H mm 700 x 1150 x 1350 700 x 1150 x 1450
Weight Kg 153 161
Electrical power kW 6,8 7,1
Allowable operating temperature °C 138°
Selectable operating temperature °C 105° - 135°
Warming temperature °C 45° - 60°
Max. operating pressure bar 2,5
Power supply V 400 VAC 50/60 Hz 3P/N
Automatic start variable, 1 minute to 7 days
Sterilization time t variable, 1 to 300 minutes
Lock automatic
Markings CE, TÜV Bayern e.V./TÜV Rheinland
Vessel material SUS304 (high-grade stainless steel)
Integrated steam generator yes
Documentation Integrated printer/USB (optional)
Safety systems Electro-mechanical safety lock, safety valve, low-water interrupt, overpressure protection switch, overheating protection switch,
circuit breaker, fault indicator (visual and audible)
Item Number 21005 21006
HG
Condensate collector
Chamber evacuation Spent-steam
condenser
Rapid cooling
Exhaust air
filtration
Vent valve
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE14
Simply, independent
Devices with heater in the chamber• Innovative passive sealing system• Automatic locking system with pressure and temperature monitoring• Opening temperature pre-select between 60-97 °C, Thermolock• No electronics in the lid - impervious to steam and heat• Timer, 4 program groups with 3 sub-groups each, including night and pressure cooker program• Bright membrane display, clear, self-explanatory• Innovative spent steam condensation, efficient, matched to the energy and volume
Four sizesHG 50 - Chamber volume of 60 L Effective useful volume of 50.2 L
HG 80 - Chamber volume of 85.1 L Effective useful volume of 76 L
HG 113 - Chamber volume of 131.7 L Effective useful volume of 108 L
HG 133 - Chamber volume of 152.2 L Effective useful volume of 129 L
Mobile use• No water/waste-water installation required• Casters for mobile use
Heating• Electrical, with maximum efficiency, directly in the feed water
• 3-level protection against overheating
HGHGHG
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HGHMCHMCEUROPEEUROPE
15
HGHG Technical Data HG 50 HG 80 HG 113 HG 133
Chamber volume Litres 60 85,1 131,7 152,2
Useful volume Litres 50,2 76 108 129
Chamber dimensions Ø x H mm 364 x 482 364 x 730 500 x 552 500 x 656
Exterior dimensions W x D x H mm 455 x 691 x 890 455 x 691 x 1030 686 x 870 x 930 686 x 870 x 1034
Required space W x D x H mm 465 x 970 x 1250 465 x 970 x 1390 700 x 1150 x 1350 700 x 1150 x 1450
Electrical power kW 3 3,8 5,8 5,8
Weight kg 62 73 137 145
Power supply V AC 230 V/240 V AC 400 V 50/60 Hz 3 phase
Allowable operating temperature 135° 138°
Selectable operating temperature °C 105° - 135°
Warming temperature °C 45° - 60°
Max. operating pressure bar 2,5
Automatic start variable, 1 minute to 7 days
Sterilization time t variable, 1 to 300 minutes
Locking system automatic
Markings CE, TÜV Bayern e.V./TÜV Rheinland
Vessel material SUS304 (high-grade stainless steel)
Safety systems Electro-mechanical safety locking system, safety valve, low-water interrupt, overpressure protection switch, overheating protection switch,
circuit breaker, fault indicator (visual and audible)
Documentation Integrated printer/RS232 (optional)
Integrated printer/USB/Memory Stick (optional)
Item Number 21001 21002 21003 21004
ACCEACCEACCEACCEHMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE16
HG
Load capacity per device Item number
Ext. dimensions Ø x H mm
Int. dimensions Ø x H mm
HG 50
HG 80
HG 113
HGS/HGD 113
HG 133
HGS/HGD 133
Basket HG 50/80 51009 345 x 235 305 x 220 2 3 - - - -
Basket/bowl HG 50/80 51010 345 x 235 305 x 220 2 3 - - - -
Basket HG 80 51019 345 x 315 305 x 310 1 2 - - - -
Basket/bowl HG 80 51023 345 x 315 305 x 310 1 2 - - - -
Double-height basket/bowl HG 50/80 51005 345 x 460 305 x 455 1 1 - - - -
Triple height basket/bowl HG 50/80 51034 345 x 700 305 x 695 - 1 - - - -
Can with hole 51007 345 x 190 305 x 185 2 3 - - - -
Can without hole 51008 345 x 190 305 x 185 2 3 - - - -
Can HG 50/80 21 litres 51006 335 x 320 300 x 300 X 1 - - - -
Low basket HG 113/133 51024 480 x 219 475 x 215 - - 2 2 2 2
Low basket/bowl HG 113/133 51025 480 x 219 475 x 215 - - 2 2 2 2
Medium basket HG 113/133 51026 480 x 275 475 x 269 - - X 1 2 2
Medium basket/bowl HG 113/133 51027 480 x 275 475 x 269 - - X 1 2 2
Tall basket HG 113/133 51032 480 x 325 475 x 314 - - X 1 2 2
Tall basket/bowl HG 113/133 51033 480 x 325 475 x 314 - - X 1 2 2
Can HG 113/133 51028 480 x 255 475 x 255 - - X 1 2 2
Can with lid HG 113/133 51029 480 x 310 475 x 310 - X 1 2 2
X= only 1 of these baskets can be loaded, no combination options with other sizes
Configurations and Accessories
HGHGHGHMCHMCEUROPEEUROPE
ACCEACCESSORIESSSORIESSSORIESSSORIESHMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE 17
Loading baskets / loading capacity per basket/can
Loading baskets and cans made from electropolished stainless steel
Item number
Interior di-mensions Ø x H mm
Round laboratory
flasks 250 ml
Round laboratory
flasks 500 ml
Square laboratory
flasks 500 ml
Erlenmeyer flasks 500 ml
Erlenmeyer flasks
1000 ml
Basket HG 50/80 without/with collecting pan 51009/51010 305 x 220 16 8 10 7 -
Basket HG 80 without/with collecting pan 51019/51023 305 x 310 32* 8 10 7 4
Can HG 50/80 without/with holes 51007/51008 305 x 185 16 8 10 7 -
Double-height basket/bowl HG 50/80 51005 305 x 455 48* 16* 20* 14* 8*
Triple height basket/bowl HG 80 51034 305 x 695 64* 24* 30* 21* 12*
21 liter can HG 50/80 51006 300 x 300 12 8 10 5 3
Low basket HG 113/133 without/with collecting pan 51024/51025 475 x 215 29 20 24 14 8
Medium basket HG 113/133 without/with collecting pan 51026/51027 475 x 269 29 20 24 14 8
Tall basket HG 113/133 without/with collecting pan 51032/51033 475 x 314 58* 20 24 14 8
Can HG 113/133 without/with lid 51028/51029 475 x 255 29 20 24 14 8
* if intermediate pans are used
HG
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPEHMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE18
Lifting deviceFor smooth transporting of loads - tirelessly and safely. The low-wear worm gear drive and the high power motor guarantee a long service life.
• Ergonomic loading and unloading of heavy, hot baskets• Retrofitable to all autoclaves• Aluminium profile, easy to clean• Durable and corrosion resistant• Low weight and quiet operation• Maintenance free
Configurations and Accessories
HMTHMTHMTHMT
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HMTHMCHMCEUROPEEUROPEHMT
19
Media temperature sensor / thermolock• For fluid sterilization• Extremely flexible• Mechanically and chemically resistant• Quick response• Encapsulated, steam-tight
HG Accessories – TrolleyFor simple, effortless transporting of the filled loading baskets
Configurations and Accessories Item Number
Flexible temperature sensor / thermolock 51001
Integrated printer 51016
Exhaust air filter 51011
Lifting device 51035
Automatic feed water HG 50 51012
Automatic feed water HG 80 51013
Automatic feed water HG 113/133 51036
GLP Set (printer and exhaust air filter) 51030
Validation connection 51080
SegoSoft® process documentation, fully automatic documentation, graphical or table form data output, long-term archiving in PDF/A1 format with advanced digital signature 51014
Ion exchanger CL-DI2800
Analogue conductivity sensor CL-A50
HV
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE20
The tireless for standard tasks - ingeniously simple and robust
Four sizesHV 25 Chamber volume of 28 L Effective useful volume of 25 L
HV 50 Chamber volume of 54.2 L Effective useful volume of 50 L
HV 85 Chamber volume of 98.8 L Effective useful volume of 85 L
HV 110 Chamber volume of 123.7 L Effective useful volume of 110 L
QuicklockThe simpler the design, the safer the lock! The lock can be opened and closed with one finger. Radially locking bolts are moved without applying any force. The passive chamber seal operates with virtually no wear.
The lid gasket is not subjected to any mechanical friction and can easily be replaced if required. The weight of the lid is completely balanced by a torsion spring. Effortless opening and closing.
Any condensate which drips off the lid is collected and fed into the spent-steam condenser. The device and floor are kept dry.
HVHVHV
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HVHMCHMCEUROPEEUROPE
21
Dual sensor systemPrecise temperature control with additional pressure monitoring. This allows for controlled excess pressure during the heating phase, which reduces the batch time.
Programs at the push of a buttonThe most important programs are pre-installed and can be opened at the push of a button:
• Sterilization of solids: With fast release of steam• Sterilization of liquids: With variable natural cooling• Sterilization of liquids: With rapid cooling for thermolabile materials• Sterilization of liquids: With subsequent reheat cycle• AGAR program: Prepares AGAR and keeps it ready for processing (thermostatic heating)• Night program: Timer-controlled, load in the evening - sterile and ready for removal in the morning down to the minute, even over the weekend!• Waste sterilization: Mixed load with a low liquid content• Automatic standby operation to save energy
Bright display with program and progress indicators.
HV
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE22
Thermolock with sterilization time controlThe German ordinance on pressure vessels TRB 402 and DIN EN 61010-2 prescribe a thermolock for the sterilization of liquids. This thermolock prevents injuries do the operating personnel due to boiling delay. This hazard should be controlled directly in the substance at risk for boiling delay.The lid can only be opened once the media temperature has also dropped below the reference value after pressure equalization.
All parameters can be set individually before starting the program, and cannot be modified after program start for safety reasons. Reliable sterilization is ensured in this manner.
Heating• Electrical, with maximum efficiency, directly in the feed water
• 3-level protection against overheating
Exhaust air filter Safety for individuals and the environment. Option for safe, emission-free sterilization of highly infectious germs and genetically modified materials.
During the venting phase, the steam displaces unsterilized residual air from the chamber and passes it through a filter system. The surround-ing air is protected against contamination as the cycle is running. Naturally, in-line sterilization of the exhaust air filter is performed.
Due to the design, condensate sterilization is a matter of course. Any condensate which precipitates flows back into the chamber and gets sterilized. Discharge can be done safely.
HVHVHVHVHV
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HVHVHVHMCHMCEUROPEEUROPE
23
HVHVHVHVEUROPEHVHVEUROPEHVHVEUROPEHVHVEUROPEHVEUROPEHVEUROPEHVHVEUROPEHVEUROPEHVEUROPEHVHV Technical Data HV 25 HV 50 HV 85 HV 110
Chamber volume Litres 28 54,2 98,8 123,7
Useful volume Litres 25 50 85 110
Chamber dimensions Ø x H mm 240 x 550 300 x 710 420 x 615 420 x 795
Exterior dimensions W x D x H mm 480 x 460 x 950 540 x 530 x 1040 660 x 650 x 1000 660 x 650 x 1180
Required space W x D x H mm 495 x 750 x 1250 560 x 810 x 1400 680 x 930 x 1450 680 x 930 x 1650
Selectable operating temperature °C 105° - 126° 105° - 135° 105° - 128° 105° - 123°
Allowable operating temperature 130° 139° 133° 127°
Maximum operating pressure bar 1,4 2,2 1,6 1,2
Electrical power kW 1,5 2,0 3,0 4.0*
Weight kg 41 57 71 81
Warming temperature °C 45° - 60°
Special cycle °C 60 - 100 °C for preparing culture media
Automatic start 1 minute to 7 days
Sterilization time t 1 to 250 minutes
Lock Quick lock with one-lever operation
Power supply V AC 220 V/240 V
Safety systems Electro-mechanical safety lock, safety valve, low-water interrupt, overpressure protection switch, overheating protection switch,
circuit breaker, fault indicator (visual and audible)
Vessel material SUS304 (high-grade stainless steel)
Documentation Integrated printer/USB (optional)
Item Number 20000 20001 20002 20003
HV
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE24
TrolleyFor simple, effortless transporting of the filled loading baskets
DocumentationBatch printer or software for direct recording of the sterilization data as proof of successful sterilization.
Configurations and Accessories Item NumberFlexible temperature sensor 50001Air cooling 50002Integrated printer 50003Exhaust air filter 50004Automatic feed water 50017GLP package consisting of integrated printer and exhaust air filter 50021
SegoSoft® process documentation, fully automatic documentation, graphical or table form data output, long-term archiving in PDF/A1 format with advanced digital signature 50034
Lifting device HV 85/HV 110, (lift with swivel arm, for loading and unloading of sterilization baskets up to 30 kg) 50032
Load capacity HV 25 HV 50 HV 85 HV 110
Square laboratory flask 500 ml 8 18 26 52*
Erlenmeyer flask 500 ml 4 12 16 32*
Round laboratory flask 1000 ml 4 21 16 - 18 16 - 18
Erlenmeyer flask 1000 ml 2 6 10 10
Solid materials approx. kg 8 15 25 29
Waste approx. kg 8 15 25 28
* with intermediate pan
HVHVHV
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HVHMCHMCEUROPEEUROPE
25
Stainless steel loading baskets Interior dimensions Ø x H mm Item NumberHV 25 225 x 250 Stackable 50006HV 50 280 x 225 Stackable 50007HV 85 390 x 290 Stackable 50008HV 110 390 x 380 Stackable 50009Loading baskets with collecting pan, stainless steelHV 25 225 x 250 Pan height 50 mm 50027HV 50 280 x 225 Pan height 50 mm 50028HV 85 390 x 290 Pan height 50 mm 50029HV 110 390 x 380 Pan height 50 mm 50030Loading cans made from electropolished stainless steelHV 25 225 x 260 closed 50010HV 50 280 x 220 closed 50011HV 85 390 x 285 with a single row of holes, bottom third 50012HV 110 390 x 375 with a double row of holes, bottom third 50013
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HMT
26
For standard tasks - ingeniously simpleThe HMT autoclaves are easy to operate, yet they offer a high level of performance, reliability, and safety. For ease of use in laboratories. The chambers are made from polished, high-grade stainless steel.
Depending on the device type, the microprocess control provides fully automated and monitored program execution. Various sterilization temperatures and sterilization times are available or can be entered. The devices meet the requirements of EN 13060.
Three types - 3 sizesHMT 260 MB (B-series) With vacuum, drying function, liquid program and printer
HMT 230/260/300 MA (B-series) With vacuum and drying function and liquid program
HMT 230/260 FA (S-series) 8 installed programs for any of the standard cycles
HMT 232 X (N-series) 4 selectable sterilization times
HMT series miniature sterilizers Series to match the applicationThe sterilizers are divided into 3 groups, the series "N", "S" and "B". Which sterilizer is best suited to your application should be determined during a consulting meeting.
An S-series sterilizer is only suitable for the sterilizing of instruments which are appropriate on account of their simple nature. An N-series sterilizer may only be used to sterilize unpackaged instruments which are classed as uncritical or semicritical A.
A B-series sterilizer is suitable for the safe steril-ization of all instruments in a clinic, insofar as they are thermally resistent and suitable for sterilization. B-series sterilizers operate with a fractionated pre-vacuum. Repeated removal of air from the sterilization cham-ber before the actual sterilization process allows the steam to unfold a sterilizing effect through packages and in hollow parts. (hollow parts, packaged items to be sterilized, fabrics).
Reliability on the workbench
HMTHMTHMTHMT
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HMTHMCHMCEUROPEEUROPE
27
Type MB Super Deluxe Tabletop Autoclave• B-series, volume of 24 L• 7 programs, fully automated• Packaged: 121 °C - 30 min; 134 °C - 15 min• Unpackaged: 121 °C - 15 min; 134 °C - 4 min• Additional individual temperature selection within the range of 105° to 135 °C• Microprocessor controlled• Extremely simple to understand display• Extremely simply maintenance• Modern design
The MB Autoclave is an all-round talent, a versatile and flexible super autoclave which can handle virtually any application and situation.
You can configure all programs with the LCD panel and the navigation keys, minimizing the keys on the control panel and provid-ing clarity.
Features• Individual temperature selection• Preset prion program• Leak tightness test, Helix test, Bowie-Dick test• Documentation / data storage via SD card and printer• LCD display• Vacuum for the sterilization of hollow parts• Drying program, 1- 60 minutes• 4 liter water tank• The tank can be filled manually or automatically (purified water)
Safety• Overheating protection• Safety valve• Pressure-dependent door lock• Reset/emergency switch• Maximum pressure limiter• Analogue pressure gauge• CE 0434 MDD, CE 0595 PEB
The autoclave offers both preset programs at 121 °C and 134 °C as well as customized temperatures (105° to 135 °C) and sterilization times. Additional features include pre-installed special programs such as a prion program and leak tightness, helix, and Bowie-Dick test programs.
The MB autoclave features a powerful integrated vacuum pump, an essential feature for sterilizing tubes and hollow parts. Water is either supplied via the integrated 4 liter water tank or by connecting the system to the purified water supply.
HMT
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE28
Type HMT 230/260/300 MA, the versatile tabletop unit• B-series, volume of 16/24/40 L• 7 programs, fully automated• 121 °C - packaged (vacuum)• 134 °C - packaged (vacuum)• Liquid and prion programs• Bowie-Dick Test• Timer, progress indicator• Microprocessor controlled• Digital display• Internal water tank• Very simple maintenance
Type HMT 230/260 FA, The tabletop standard• S-series, volume of 16/24/40 L• 8 programs, fully automated• 121 °C - packaged, solid items, liquids• 134 °C - packaged, solid items, liquids• 121°/134 °C - solid items, drying• Microprocessor controlled• Simple digital display• Water tank• Very simple maintenance
Safety• Electromechanical overheating protection• Electronic overpressure protection• Pressure safety valve• Mechanical pressure-dependent door lock• Reset/emergency button
Safety• Electromechanical overheating protection• Maximum pressure limiter• Safety valve• Mechanical pressure-dependent door lock• Reset/emergency button
HMTHMTHMTHMT
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HMTHMCHMCEUROPEEUROPE
29
Safety• Overheating protection• Maximum pressure limiter• Safety valve• Mechanical pressure-dependent door lock
Type HMT 232 X, for minimum requirements• N-series, volume 16 L• 4 programs, water tank• Packaged: 121 °C - 30min; 134 °C - 15min• Unpackaged: 121 °C - 15min; 134 °C - 4min• Mechanical pressure gauge• Microprocessor controlled• Extremely simple display• Extremely simple maintenance• Economical
HMT Technical Data 232 X 230 FA 260 FA 230 MA 260 MA 300 MA 260 MB
Chamber volume Litres 16 16 24 16 24 40 24
Chamber dimensions Ø x H
mm 230 x 410 230 x 410 260 x 450 230 x 410 260 x 450 300 x 570 260 x 450
Exterior dimensions W x D x H
mm 500 x 537 x 406
522 x 594 x 410
533 x 655 x 442
522 x 594 x 410
533 x 655 x 442
620 x 900 x 489
533 x 655 x 442
Heating power kW 1,4 1,9 2,4 2,0 2,8 3,2 2,7
Weight kg 30 48 53 44 54 68 59
Vacuum no yes
Water tank Litres 4,2 8,4 4,2
Operating temperature °C 118°-134° 121° or 135° 105-135°
Markings CE
Power supply V AC 220 V/240 V
Safety systems
Overheating protection, safety valve, overpressure switch, lock, water level monitoring of the reservoir and sterilization chamber
Item Number 22001 22004 22005 22002 22003 22012 22014
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HMT
30
Documentation with e-Storage RecorderSuitable for all HMT 230/260 FA and MA devices.All cycle parameters can be archived in digital form for future use.The data can be transferred to a PC via an SD card or USB device in order to print it.
• Automatic recording• Data recording from the start to the end of the cycle• Simultaneous recording of cycle parameters, Backup to RAM and SD card or USB device (only the last cycle is stored in RAM), CSV format, easy to convert• Paperless, environmentally friendly• Microprocessor analysis• Independent temperature indicator• Cycle counter• Error code display
Only available in combination with devices delivered from spring 2014. Retrofitting is not possible
Documentation Item Numbere-Storage Recorder for HMT FA/MA 52040
Configurations and Accessories
HMT load capacity 232 X 230 FA 260 FA 230 MA 260 MA 300 MA 260 MB
Round laboratory flask 50 ml 24 23 46 23 46 55 46
Round laboratory flask 100 ml 18 15 20 15 20 28 30
Round laboratory flask 250 ml 9 11 15 11 15 20 15
Erlenmeyer flask 250 ml 9 11 15 11 15 9 15
Erlenmeyer flask 500 ml 3 3 6 3 6 9 6
Square laboratory flask 500 ml 4 4 8 4 8 18 8
Erlenmeyer flask 1000 ml 8
Round laboratory flask 1000 ml 8
HMTHMTHMTHMT
HMC EUROPE - STERILIZING SIMPLY AND WELL - HMC EUROPE
HMTHMCHMCEUROPEEUROPEHMT
31
Sterilizing boxes L x W x H mm Item Number
HMT 232 X
Container with lid, side walls with closable holes
345 x 183 x 125 52007
HMT 230 FA/MA 345 x 183 x 125 52012
HMT 260 FA/MA 375 x 228 x 120 52017
HMT 300 MA 500 x 205 x 185 52039
Baskets
HMT 230 FA/MA
Rectangular basket
340 x 180 x 120 52036
HMT 260 FA/MA 370 x 210 x 105 52037
HMT 300 MA 500 x 200 x 180 52038
Stacked systems
Set HMT 232 XSet, consisting of a rack with plates and removal aid
323 x 253 (max.) x 192 (max.) 52023
Set HMT 230 FA/MA 323 x 253 (max.) x 192 (max.) 52024
Set HMT 260 FA/MA 383 x 290 (max.) x 205 (max.) 52025
HMT 232 XShelf for various heights, without plates
323 x 253 (max.) x 192 (max.) 52009
HMT 230 FA 323 x 253 (max.) x 192 (max.) 52014
HMT 260 FA 383 x 290 (max.) x 205 (max.) 52019
Drawer plates
HMT 232 X
Insert for storage rack
323 x 178 x 21 52008
HMT 230 FA/MA 323 x 178 x 21 52013
HMT 260 FA/MA 382 x 187 x 21 52018
HMC EUROPE GMBHPhone +49 8633 505 20 -0 Fax +49 8633 505 20 -99in fo@hmc-eu rope .com w w w. h m c - e u r o p e . c o m
Sterilization TechnologyKellerstr. 1 84577 TüsslingGermany
Outstanding Technology - not of this world
Sterilization Technology
HMCHMCEUROPEEUROPE
kkkkkkkk
Zertifikat
Servicetraining 11.- 12.07.2013
Für
Mr. Dominicus Mastermanus
International Lab Suply, Brazil
Diese Bescheinigung bestätigt die Teilnahme auf dem obengenannten
Servicetraining erwähnten Dienst, der sich durch das HMC Europa GmbH ausbildet.
Folgende Thermenschwerpunkte wurden behandelt:
Funktion und Arbeiten mit Autoklaven HV-und HG-Reihe
Fehlerermittlung und Fehlerbeseitigung
Durchführung von Wartungs- und Reparaturarbeiten an Trainingsgeräten
Seminarleiter
HMC ServicesOur customer service team builds on the experience gained from 80 years of sterilization technology and offers you individual and competent service even after you purchase your device.From on-time delivery and commissioning with training, to validation, qualification, and extending to upkeep your autoclave (maintenance) - our technicians are always glad to assist you. We have a europe-wide and constantly growing service network in order to ensure the operating safety and to maintain the value of the HMC devices in addition to their world-renowned durability.Excellent advice for the users is ensured through recurrent training given by our specialists.Our service partners are always up to date thanks to yearly service trainings.This intensive preparation on behalf of our customers guarantees short response times and the highest efficiency.The safety and enjoyment you gain from using your HMC autoclave is our biggest incentive. For us, the most important thing is that with HMC you are....
... STERILIZING SIMPLY AND WELL
© 10/2013 HMC EUROPE GMBH. All rights reserved. Dissemination and duplication of this document, utilisation, and disclosing of its content is prohibited unless expressly permitted. Infringement creates a liability for compensation. No liability is assumed for any errors. Technical changes reserved.