7/27/2019 Sony Bluetooth DRCBT15
1/56
Wireless
Audio Receiver
3-280-224-11(1)
DRC-BT15 2007 Sony Corporation
Operating Instructions
Manual de instrucciones
US
ES
7/27/2019 Sony Bluetooth DRCBT15
2/56
2US
WARNINGTo reduce the risk of fire or electricshock, do not expose thisapparatus to rain or moisture.
To reduce the risk of electricalshock, do not open the cabinet.Refer servicing to qualifiedpersonnel only.
Do not install the appliance in a confinedspace, such as a bookcase or built-in
cabinet.
To reduce the risk of fire, do not cover the
ventilation of the apparatus withnewspapers, tablecloths, curtains, etc.And do not place lighted candles on the
apparatus.
To reduce the risk of fire or electricshock, do not place objects filled with
liquids, such as vases, on the apparatus.
Connect the AC power adaptor to aneasily accessible AC outlet. Should you
notice an abnormality in the AC poweradaptor, disconnect it from the AC outlet
immediately.
Do not expose the batteries (battery pack
or batteries installed) to excessive heatsuch as sunshine, fire or the like for a longtime.
Excessive sound pressure fromheadphones can cause hearing loss.
InformationThis device complies with Part 15 of FCCRules and RSS-Gen of IC Rules.Operation is subject to the following two
conditions: (1) this device may not causeharmful interference, and (2) this device
must accept any interference received,including interference that may cause
undesired operation of this device.
You are cautioned that any changes ormodifications not expressly approved in
this manual could void your authority tooperate this equipment.
This equipment must not be co-located oroperated in conjunction with any otherantenna or transmitter.
This equipment complies with FCC/ICradiation exposure limits set forth foruncontrolled equipment and meets theFCC radio frequency (RF) ExposureGuidelines in Supplement C to OET65and RSS-102 of the IC radio frequency(RF) Exposure rules. This equipment hasvery low levels of RF energy that it isdeemed to comply without testing ofspecific absorption ratio (SAR).
NoteThis equipment has been tested and foundto comply with the limits for a Class Bdigital device, pursuant to Part 15 of the
FCC Rules. These limits are designed toprovide reasonable protection against
harmful interference in a residentialinstallation. This equipment generates,
uses and can radiate radio frequencyenergy and, if not installed and used inaccordance with the instructions, may
cause harmful interference to radio ortelevision reception, which can be
determined by turning the equipment offand on, the user is encouraged to try to
correct the interference by one or more ofthe following measures:
Reorient or relocate the receivingantenna.
Increase the separation between theequipment and receiver.
Connect the equipment into an outlet ona circuit different from that to which thereceiver is connected.
Consult the dealer or an experiencedradio/TV technician for help.
The Bluetooth word mark and logos areowned by the Bluetooth SIG, Inc. and anyuse of such marks by Sony Corporation isunder license.
Other trademarks and trade names arethose of their respective owners.
MPEG Layer-3 audio coding technologyand patents licensed from Fraunhofer IISand Thomson.
7/27/2019 Sony Bluetooth DRCBT15
3/56
7/27/2019 Sony Bluetooth DRCBT15
4/56
4US
What is Bluetooth wirelesstechnology?Bluetooth wireless technology is
a short-range wireless technologythat enables wireless datacommunication between digitaldevices, such as a computer ordigital camera. Bluetooth wirelesstechnology operates within a rangeof about 10 meters (about 30 feet).Connecting two devices asnecessary is common, but some
devices can be connected tomultiple devices at the same time.You do not need to use a cable forconnection, nor is it necessary forthe devices to face one another, suchis the case with infrared technology.For example, you can use such adevice in a bag or pocket.Bluetooth standard is aninternational standard supported bythousands of companies all over theworld, and employed by variouscompanies worldwide.
Communication Systemand Compatible BluetoothProfiles of this unitProfile is standardization of the
function for each Bluetooth devicespecification. This unit supports thefollowing Bluetooth version andprofiles:
Communication System :
Bluetooth Specification version 2.0 +EDR*1
Compatible Bluetooth Profiles: A2DP (Advanced Audio Distribution
Profile): Transmitting or receivingaudio content of high-quality.
AVRCP (Audio Video Remote Control
Profile): Controlling A/V equipment;pausing, stopping, starting playback,
volume control, etc. HSP (Headset Profile)*2: Talking on the
phone/Operating the phone. HFP (Hands-free Profile)*2: Talking on
the phone/Operating the phone by
hands-free.
*1 Enhanced Data Rate
*2 When you use a Bluetooth mobilephone supported by both HFP (Hands-
free Profile) and HSP (Headset
Profile), set to HFP.
Notes To be able to use the Bluetooth
function, the Bluetooth device to be
connected requires the same profile asthe units.Note also that even if the same profile
exists, devices may vary in functiondepending on their specifications.
Due to the characteristic of Bluetoothwireless technology, the sound played
on this unit is slightly delayed from thesound played on the Bluetooth deviceduring talking on the telephone or
listening to the music.
7/27/2019 Sony Bluetooth DRCBT15
5/56
5US
Welcome!Thank you for purchasing this Sony Wireless Audio Receiver. This unit usesBluetooth wireless technology.
Enjoy music wirelessly from Bluetooth technology-enabled music players,or mobile phones.*1
Connect your favorite headphones via stereo mini jack (headphones aresold separately).
Talk hands-free with Bluetooth technology-enabled mobile phones.*2
Do basic remote control operation (play, stop, etc.) of music playerfunctions via Bluetooth connection.*3
Bluetooth version 2.0 + EDR (Enhanced Data Rate) for higher quality
audio with less interference and lower power consumption. Useful rechargeable function.
For details on Bluetooth wireless technology, see page 4.
Listening to musicTalking on the phone
*1 The connected Bluetooth device is required to support A2DP (Advanced AudioDistribution Profile).
*2 The connected Bluetooth device is required to support HFP (Hands-free Profile) or
HSP (Headset Profile).*3 The connected Bluetooth device is required to support AVRCP (Audio Video Remote
Control Profile).
7/27/2019 Sony Bluetooth DRCBT15
6/56
6US
VCallingVListening to music
VV
3 steps to Bluetooth function
Bluetoothmobile phone,etc.
Pairing
Wireless AudioReceiver
Bluetooth connectionOperate the Bluetooth device tomake the Bluetooth connection.
Connection
Listening to musicYou can listen to music played onthe Bluetooth device.Playback, stop, or pause ispossible from this unit.
Music
Bluetooth connectionWhen the unit is turned on, theunit starts making the Bluetoothconnection to the recognizedmobile phone automatically.
Talking on the phoneYou can make and receive a callby operating this unit.
PairingFirst, register (pair) a Bluetooth device (mobile phone, etc.) and this
unit with each other. Once pairing is established, there is no need forpairing again.
Voice
ConnectionA2DP AVRCP
HFP HSP
cPage 10 - 11
cPage 15
cPage 17 - 18
cPage 18 - 20cPage 15 - 16
7/27/2019 Sony Bluetooth DRCBT15
7/56
7US
VOL
POWER
VOL
.
.
Nx
7
9 q;
4
1
3
2
5
6
qa
8
Location and Function of Parts
1 Headphones jack
2 Strap hole
3 Clip hole4 Indicator (red)
Indicates the power status of theunit.
5 Microphone6 Multi function button
Controls various call functions.
7 Indicator (blue)Indicates the communicationstatus of the unit.
8 Jog switchControls various functionswhen listening to music.Adjust the volume of the unitwhen talking over thetelephone.
9 RESET button
0 Contact pointqa POWER button
GETTING STARTED
7/27/2019 Sony Bluetooth DRCBT15
8/56
8US
DCIN
3V
1 Connect the suppliedAC power adaptor withthe battery chargingstand.
2 Connect the suppliedAC power adaptor to anAC outlet.
(Rear)
To DC IN3 V jack
AC poweradaptor (supplied)
Battery chargingstand (supplied)
3 Put the unit on thebattery charging stand.
Rest the unit on the batterycharging stand so that the units
contact point meets the contactpin on the battery charging stand,and make sure that the indicator(red) lights up.
Charging is completed in about2.5 hours* and the indicator (red)goes off automatically.
* Time required for empty battery to
recharge.
NoteWhen you attach the strap to this unit,
do not let the strap get caught betweenthe unit and the battery charging stand.
Tips If the AC power adaptor is connected to
an AC outlet while the unit is turned on,the unit will be turned off automatically.
This unit cannot be turned on whilecharging.
Battery chargingstand (supplied)
To an AC outlet
Charging the unitThe unit contains a rechargable Lithium-Ion battery, which should becharged before using for the first time.
Contact pin
Battery chargingstand (supplied)
Wireless AudioReceiver
7/27/2019 Sony Bluetooth DRCBT15
9/56
9US
Approx.usage hours
6 hours
100 hours
Status
Full
Mid
Low (needs to
charge)
CautionIf this unit detects a problem whilecharging, the indicator (red) mayturn off, although charging is notcomplete.Check for the following causes:
Ambient temperature exceeds therange of 0 C 40 C (32 F 104 F).
There is a problem with thebattery.
In this case, charge again within theabove-mentioned temperature range.If the problem persists, consult yournearest Sony dealer.
Notes If the battery is not used for a long time,
battery may be quickly depleted,however, after a few recharges, battery
life will improve. If the life of the built-in rechargeable
battery drops to half the normal length,the battery should be replaced. Consult
your nearest Sony dealer forreplacement of the rechargeable battery.
Avoid exposure to temperature
extremes, direct sunlight, moisture,sand, dust or mechanical shock. Never
leave in a car parked in the sun. Use only the supplied AC power
adaptor. Do not use any other ACpower adaptor.
Usage hours*
Status
Communication
time (includingmusic playback
time) (up to)
Standby time
(up to)
* Time stated above may vary, dependingon ambient temperature or conditions of
use.
Checking the remainingbatteryWhen pressing the POWER buttonwhile the unit is turned on, theindicator (red) flashes. You cancheck the remaining battery by thenumber of times the indicator (red)flashes.
Indicator (red)
3 times
2 times
1 time
NoteYou cannot check the remaining batteryimmediately after the unit is turned on, or
while pairing.
When the battery is almost empty
The indicator (red) flashes slowlyautomatically.When the battery becomes empty, a
beep sounds and the unit will turnoff automatically.
7/27/2019 Sony Bluetooth DRCBT15
10/56
10US
Procedures of pairing
1 Place the Bluetoothdevice within 1 m (3 ft)of this unit.
2 Press and hold thePOWER button for7 seconds or more to
standby for pairingwhile the unit is turnedoff.
Notes After about 3 seconds, power is
turned on and the indicator (blue)and indicator (red) flash together
twice. Keep the POWER buttonpressed without releasing. The
indicator (blue) starts flashing.When both indicators start flashingtogether again, release the button.
This unit enters into pairing mode. If pairing is not established within
about 5 minutes, pairing mode willbe cancelled and this unit will turn
off. In this case, start over from
step 1.
PairingWhat is pairing?
Bluetooth devices need to bepaired with each otherbeforehand.Once Bluetooth devices are paired,there is no need for pairing again,except in the following cases: Pairing information is deleted
after repair, etc. This unit is paired with 9 or more
devices.This unit can be paired with up to8 devices; if a new device ispaired after 8 devices have beenpaired, the device whose latestconnection time is the oldestamong the 8 paired devices isreplaced by the new one.
When recognition of the unit bythe device to be connected isdeleted.
This unit is initialized (page 26).All pairing information is deleted.
7/27/2019 Sony Bluetooth DRCBT15
11/56
11US
3 Perform pairingprocedure on theBluetooth device todetect this unit.The list of detected devices
appears on the display of theBluetooth device. This unit isdisplayed as DRC-BT15.If DRC-BT15 is notdisplayed, repeat from step 1.
Notes For details, refer to the operating
instructions supplied with theBluetooth device.
When pairing with a Bluetoothdevice that cannot display a list ofdetected devices or that has no
display, you may pair the device bysetting both this unit and the
Bluetooth device to pairing mode.At this time, if passcode is set
besides 0000 on the Bluetoothdevice, pairing cannot be done withthis unit.
4 Select DRC-BT15 onthe display of theBluetooth device.
5 If Passcode* input isrequired on the displayof a Bluetooth device,
input 0000.Pairing is complete when theindicator (blue) flashes slowly.The message standing forPairing complete appears onthe display of some Bluetoothdevices.
* Passcode may be called Passkey,
PIN code, PIN number, or
Password.
6 Start the Bluetoothconnection from theBluetooth device.This unit memorizes the deviceas the last connected device.
Some Bluetooth devices mayconnect with the unitautomatically when pairing iscomplete.
Tips To pair with other Bluetooth devices,
repeat steps 1 to 5 for each device.
To delete all pairing information, seeInitializing the unit (page 26).
7/27/2019 Sony Bluetooth DRCBT15
12/56
12US
Wearing the unit
3 Connect theheadphones (notsupplied) to this unit.
4 Clip this unit to apocket, etc., of yourclothes and then wearthe headphones.Wear the earphone markedL inyour left ear, and the onemarkedR in your right ear.
When using the clip
1 While pinching the leverat the end of the clip(supplied), hold the clipacross the unit asshown, then insert theclip into the clip hole.
2 While pinching thelever, turn the unitcounterclockwise.When the lever is released, theclip is locked to prevent it fromcoming off.
Lever
7/27/2019 Sony Bluetooth DRCBT15
13/56
7/27/2019 Sony Bluetooth DRCBT15
14/56
7/27/2019 Sony Bluetooth DRCBT15
15/56
15US
VOL
VOL
. .Nx
Check the following beforeoperating the unit.
The Bluetooth device is turnedon.
Pairing of this unit and theBluetooth device is complete.
The Bluetooth device supports the
transmitting music function(profile: A2DP*).
1 Press and hold thePOWER button forabout 3 seconds whilethe unit is turned off.The indicator (blue) andindicator (red) flash together
twice and the unit is turned on.
Notes Do not press and hold the POWER
button for more than 7 seconds,otherwise pairing mode is entered.
After the unit is turned on, the unitattempts to connect to the lastconnected Bluetooth deviceautomatically with HFP or HSP.
Listening to musicWhen not calling with this unit, donot make the last connectedBluetooth device ready for HFP or
HSP connection. To make orreceive a call while playing backmusic, see page 20.
2 Make the Bluetoothconnection (A2DP) froma Bluetooth device tothis unit.Refer to the operatinginstructions supplied with theBluetooth device on how tooperate it.
3 Start playback on theBluetooth device.
TipBluetooth connection of A2DP
(Advanced Audio Distribution Profile)can also be operated with the jog switch
from this unit to the Bluetooth deviceexcept when making a call on this unit.
Notes When you play music by connecting the
unit to a Bluetooth device using HSP(Headset Profile), sound quality will not
be high. For better sound, change theBluetooth connection to A2DP by
operating the Bluetooth device. If this unit is turned off while an A2DP
Bluetooth connection is established,operate the unit again from step 1 to
make the A2DP Bluetooth connectionagain.
* For detail on profiles, see page 4.
OPERATING THE UNIT
POWER button
Continued
Jog
switch
7/27/2019 Sony Bluetooth DRCBT15
16/56
16US
To adjust the volumePush the jog switch up or downwhile listening to music to adjust thevolume.
Tips
Depending on the connected device, itmay be necessary to adjust the volumeon the connected device as well.
Volume for calling and listening tomusic can be adjusted independently.Even if you change the volume while
calling, the volume for music playbackdoes not change.
To stop use
1 Terminate the Bluetoothconnection by operatingthe Bluetooth device.
2 Press and hold thePOWER button forabout 3 seconds.
The indicator (blue) andindicator (red) light up together,and the unit turns off.
TipWhen you finish playing music, theBluetooth connection may terminate
automatically, depending on theBluetooth device.
Controlling the audiodevice AVRCP
If the Bluetooth audio deviceconnected with this unit supports
AVRCP (Audio Video RemoteControl Profile), you can control byusing the unit buttons.Refer to the operating instructionssupplied with the Bluetooth deviceon how to operate it.
NoteOperation of the Bluetooth connecting
device by this unit will vary depending on
its specification.
Status: In stop or pause mode
1 Starts playback*1
2 Stop3
Skip to next/previous4 Fast-forward/Fast-rewind*2
Status: In play mode
5 Pause*1
6 Stop
7 Skip to next/previous8 Fast-forward/Fast-rewind*2
*1 You may need to press the buttontwice depending on the Bluetooth
device.*2 Some Bluetooth devices may not
operate.
Note
You cannot adjust the volume of theBluetooth device by pushing the jog
switch of this unit up or down.
1
3
Short Press Long Press
Nx
./>
2
4
Short Press Long Press
Nx
./>
5
7
6
8
7/27/2019 Sony Bluetooth DRCBT15
17/56
17US
Check the following beforeoperating the unit.
The Bluetooth function is activeon the mobile phone.
Pairing of this unit and theBluetooth mobile phone iscomplete.
1 Press and hold thePOWER button forabout 3 seconds whilethe unit is turned off.The indicator (blue) andindicator (red) flash togethertwice, the unit turns on and then
this unit tries to connect to thelast Bluetooth mobile phone thatwas used.
NoteDo not press and hold the POWERbutton for more than 7 seconds,
otherwise pairing mode is entered.
TipThis unit will stop trying to connect
to the Bluetooth mobile phone after 1minute. In such a case, press the multifunction button to try to connect
again.
VOL
VOL
. .Nx
When this unit does notconnect to a Bluetooth
mobile phone automaticallyYou can make a connection byoperating Bluetooth mobile phoneor by operating this unit to connectthe last connected Bluetooth device.
A To make a connectionby operating Bluetoothmobile phone
1 Make the Bluetoothconnection (HFP orHSP*) from theBluetooth mobile phoneto this unit.Refer to the manual suppliedwith your Bluetooth mobilephone for operation details.The list of recognized devicesappears on the display of theBluetooth mobile phone. Thisunit is displayed asDRC-BT15.When you use the Bluetoothmobile phone features both HFP(Hands-free Profile) and HSP(Headset Profile), set to HFP.
NoteWhen connecting to a Bluetooth
mobile phone which is different fromthe last connected one, make the
connection following the aboveprocedure.
* For details on profiles, see
page 4.
Calling
Continued
Jogswitch
Multi function button
POWER button
7/27/2019 Sony Bluetooth DRCBT15
18/56
18US
ring tone set on the unit ring tone set on the mobile
phone ring tone set on the mobile
phone only for Bluetoothconnection
NoteIf you received a call by pressing thebutton on the Bluetooth mobile phone,
some Bluetooth mobile phones may havehandset use priority. In this case, set to
talk with the unit by pressing and holdingthe multi function button for about 2
seconds, or by operating the Bluetoothmobile phone. For details, refer to themanual supplied with your Bluetooth
mobile phone.
To adjust the volumePush the jog switch up or down toadjust the volume.
Tips You cannot adjust the volume when not
communicating.
Volume for calling and listening tomusic can be adjusted independently.
Even if you change the volume whileplaying back the music, the volume of acall does not change.
To terminate a callYou can end a call by pressing themulti function button on the unit.
To stop use1 Terminate Bluetooth
connection by theBluetooth mobile phone.
2 Press and hold thePOWER button for about3 seconds to turn off the
power.The indicator (blue) andindicator (red) light up together,and the unit turns off.
B To make a connectionwith the last connectedBluetooth device byoperating this unit
1 Press the multi functionbutton.The indicator (blue) andindicator (red) start flashing atthe same time, and the unitperforms the connectionoperation for about 5 seconds.
NoteWhen listening to music with this unit, a
Bluetooth connection cannot be madewith the multi function button.
To call
1 Use the buttons on yourmobile phone whenmaking a call.If no dial tone is heard on thisunit, press and hold the multi
function button for about 2seconds.
TipYou can call in the following way,
depending on the Bluetooth mobilephone. Refer to the manual supplied with
your mobile phone on operating details. When not communicating, you can call
using the voice-dial function by
pressing the multi function button. You can call the last dialed number by
pressing the multi function button forabout 2 seconds.
To receive a callWhen an incoming call arrives, a ringtone will be heard from the unit.
1 Press the multi function
button on the unit.The ring tone differs in thefollowing ways, depending onyour mobile phone.
7/27/2019 Sony Bluetooth DRCBT15
19/56
19US
Controlling theBluetooth mobilephone HFP, HSP
The operation of the buttons on thisunit varies depending on yourmobile phone.HFP (Hands-free Profile) or HSP(Headset Profile) is used forBluetooth mobile phone. Refer tothe operating instructions suppliedwith your Bluetooth mobile phoneon supported Bluetooth profiles or
how to operate.
HFP (Hands-free Profile)
HSP (Headset Profile)
*1 Some functions may not be supporteddepending on the Bluetooth mobile
phone. Refer to the operatinginstructions supplied with your mobilephone.
*2 This may vary, depending on the
Bluetooth mobile phone.*3 Some functions may not be supportedwhen calling using the Bluetooth
mobile phone.
Status Multi function button
Standby
Voice Dial
active
Outgoing call
Incoming call
During call
Short Press
Start Voice
Dial*1
Cancel Voice
Dial*1
End outgoingcall
Answer
End call
Long Press
Last number
redial
Reject
Change call
device
Status Multi function button
Standby
Outgoing call
Incoming call
During call
Short Press
End outgoing
call*1
Answer
End call*3
Long PressDial*1
End outgoing
call or change
call device to
headset*2
Change call
device to
headset
7/27/2019 Sony Bluetooth DRCBT15
20/56
20US
Calling while playing back musicThe Bluetooth connection using HFP or HSP as well as A2DP is necessaryto make a call while playing back music.
For example, to make a call using a Bluetooth mobile phone while listeningto music on a Bluetooth compatible music player, this unit needs to beconnected to the mobile phone using HFP or HSP.
Make a Bluetooth connection between this unit and thedevice in use following the procedures outlined below.
1 Make a Bluetooth connection between this unit andthe mobile phone in use with HFP or HSP following
the procedures outlined in Calling (see page 17).
2 Operate the Bluetooth device (music player or mobilephone) used for playing the music to make aBluetooth connection to this unit using A2DP.
To receive a call whileplaying back music
When an incoming call arrives, themusic pauses and the ring tone isheard from this unit.
1 Press the multi functionbutton and talk.After finishing the call, press themulti function button. This unitis switched back to music
playback.
When no ring tone is heardeven if an incoming callarrives
1 Stop music playback.
2 When ringing, press the
multi function buttonand talk.
To make a call whileplaying back music
1 Press the multi functionbutton while playingback music (page 19), oroperate your Bluetoothmobile phone to make atelephone call.If no dial tone is heard on this
unit, press and hold the multifunction button for about 2seconds.
7/27/2019 Sony Bluetooth DRCBT15
21/56
21US
Disposing of the unitA Lithium-lon rechargeable battery is built into this unit.For environmental conservation, be sure to remove the built-in rechargeable
battery from the unit before disposing, and dispose of the batteryappropriately.
ADDITIONAL INFORMATION
1 Remove the screws(2 pieces) on the backof this unit.
2 Lift the side with thestrap hole to removethe cover.
3 Pull out the connector.Dispose of the rechargeablebattery without removing it fromthe cover.
Note
Do not remove the rechargeable batteryfrom the cover, the rechargeable battery
could be destroyed.
Rechargablebattery
7/27/2019 Sony Bluetooth DRCBT15
22/56
22US
Precautions
On Bluetooth communication Bluetooth wireless technology operates
within a range of about10 meters (about 30 feet).Maximum communication range mayvary depending on obstacles (humanbody, metal, wall, etc.) orelectromagnetic environment.
The antenna is built into the unit asillustrated in the dotted line. Thesensitivity of the Bluetoothcommunication will improve by turningthe direction of the built-in antenna tothe connected Bluetooth device.The communication distance shortenswhen the obstacles are between theantenna of the connected device andthis unit.
The following conditions may affect thesensitivity of Bluetooth communication.
There is an obstacle such as a humanbody, metal, or wall between this unitand Bluetooth device.
A device using 2.4 GHz frequency,such as a wireless LAN device,cordless telephone, or microwaveoven, is in use near this unit.
Because Bluetooth devices and wirelessLAN (IEEE802.11b/g) use the samefrequency, microwave interference mayoccur and resulting in communicationspeed deterioration, noise, or invalidconnection if this unit is used near awireless LAN device. In such as case,
perform the following. Use this unit at least 10 m (about
30 ft) away from the wireless LANdevice.
If this unit is used within 10 m (about30 ft) of a wireless LAN device, turnoff the wireless LAN device.
Install this unit and Bluetooth deviceas near to each other as possible.
Microwaves emitting from a Bluetoothdevice may affect the operation ofelectronic medical devices. Turn offthis unit and other Bluetooth devices inthe following locations, as it may causean accident. where inflammable gas is present, in
a hospital, train, airplane, or a petrolstation
near automatic doors or a fire alarm This unit supports security capabilities
that comply with the Bluetooth standard
to provide a secure connection when theBluetooth wireless technology is used,but security may not be enoughdepending on the setting. Be carefulwhen communicating using Bluetoothwireless technology.
We do not take any responsibility forthe leakage of information duringBluetooth communication.
Connection with all Bluetooth devices
cannot be guaranteed. A device featuring Bluetooth function
is required to conform to theBluetooth standard specified byBluetooth SIG, Inc. and beauthenticated.
Even if the connected deviceconforms to the above mentionedBluetooth standard, some devicesmay not be connected or work
correctly, depending on the featuresor specifications of the device.
While talking on the phone handsfree, noise may occur, depending onthe device or communicationenvironment.
Depending on the device to beconnected, it may require some time tostart communication.
Location ofbuilt-in antenna
7/27/2019 Sony Bluetooth DRCBT15
23/56
23US
On the supplied AC power
adaptor Use the AC power adaptor supplied
with this unit. Do not use any other ACpower adaptor since it may cause the
unit to malfunction.
Polarity of the plug
If you are not going to use this unit for
a long time, unplug the AC poweradaptor from the AC outlet. To remove
the AC power adaptor from the walloutlet, grasp the adaptor plug itself;
never pull the cord.
Others Do not place this unit in a place
exposed to humidity, dust, soot orsteam, subject to direct sunlight, or in a
car waiting at a traffic signal. It may
cause a malfunction. Do not use the strap in a place where
the strap could be snagged, such as neara shredder or machine equipment.
Using the Bluetooth device may notfunction on mobile phones, depending
on radio wave conditions and locationwhere the equipment is being used.
If you experience discomfort after using
the Bluetooth device, stop using the
Bluetooth device immediately. Shouldany problem persist, consult yournearest Sony dealer.
Listening with this unit at high volumemay affect your hearing. For traffic
safety, do not use this unit while drivingor cycling.
Do not put weight or pressure on this
unit as it may cause the unit to deformduring long storage.
If you have any questions or problemsconcerning this unit that are not covered
in this manual, please consult yournearest Sony dealer.
7/27/2019 Sony Bluetooth DRCBT15
24/56
24US
Common
The unit is not turned on., Charge the battery of the unit., The unit is not turned on while
charging. Remove the unit from thebattery charging stand and then turnon the unit.
Pairing cannot be done., Bring this unit and the Bluetooth
device closer together.
Cannot make the Bluetoothconnection., Check that this unit is turned on., Check that the Bluetooth connecting
device is turned on and the Bluetoothfunction is on., Connection with the Bluetooth device
may not be memorized on this unit.Make the Bluetooth connection fromthe Bluetooth device to this unit soonafter pairing is complete.
, This unit or Bluetooth connectingdevice is in sleep mode.
, The Bluetooth connection isterminated. Make the Bluetooth
connection again (when listening tomusic: see page 15, when calling: seepage 17).
Distorted sound, Ensure that this unit is not receiving
interference from a wireless LAN,other 2.4 GHz wireless device, ormicrowave oven.
TroubleshootingIf you run into any problems using this unit, use the following checklist andread the product support information on our website.
Should any problem persist, consult your nearest Sony dealer.The correspondencedistance is short. (Soundskips.), If a device that generates
electromagnetic radiation, such as awireless LAN, other Bluetoothdevice(s), or a microwave oven isnearby, move away from suchsources.
, Point the antenna of this unit(page 22) towards the Bluetoothdevice. Make sure no obstaclesblocks the communication.
The unit does not operateproperly., Reset the unit. Pairing information is
not deleted by this operation.
Insert a small pin, etc., into the hole,and push until you feel a click.
When listening tomusic
No sound, Check that both this unit and the
Bluetooth device are turned on., A2DP Bluetooth connection is not
made between this unit and theBluetooth device. Make an A2DPBluetooth connection (page 15).
, Check that music is being playedback by the Bluetooth device.
7/27/2019 Sony Bluetooth DRCBT15
25/56
25US
, Check that the volume of the unit isnot set too low.
, Turn up the volume on the connecteddevice if necessary.
, Pair this unit and Bluetooth deviceagain (page 10).
Low sound level, Turn up the volume of this unit., Turn up the volume on the connected
device if necessary.
Low sound quality, Switch the Bluetooth connection to
A2DP (Advanced Audio DistributionProfile) when HSP (Headset Profile)is set.
Cannot make the Bluetoothconnection from Bluetoothdevice to this unit., The Bluetooth device is not equipped
with SCMS-T content protection*.With the unit turned off, press andhold POWER andNx for about 7seconds to deactivate the SCMS-Tprotection. The indicator (blue)
flashes once.* The SCMS-T content protectionmethod is one of the methods toprotect the contents transmitted onthe Bluetooth wireless technology.This unit can receive the contentsprotected by this method. Press andhold the POWER button andNxagain for about 7 seconds toreactivate the SCMS-T contentprotection method on this unit. The
indicator (blue) flashes twice.
Sound skips frequentlyduring playback., Reception condition of this unit may
have become unstable due toimproper matching of the bit-ratesetting for the music transmitted fromthe Bluetooth device and theenvironment in which this unit is
used. *1
Terminate A2DP Bluetoothconnection by operating theBluetooth device. While this unit isturned on, press and holdNx forabout 7 seconds to lower the settingof receivable bit rate. *2
*1 Bit rate is a numerical value which
represents data transmissionvolume per second. The higher thebit rate, in general, the better
quality the sound will be. This unitcan receive high bit rate music but
sound skipping may occurdepending on the usageenvironment.
*2 When bit rate setting is completed,the indicator (blue) flashes once.
The above operations may notreduce the sound skip depending on
the usage environment. To reset tothe original setting, press and holdNx again for about 7 seconds.The indicator (blue) flashes twice.
When calling
The recipients voicecannot be heard., Check that both this unit and the
Bluetooth mobile phone are turnedon.
, Check the connection between thisunit and the Bluetooth mobile phone.Make a Bluetooth connection (HFPor HSP) again (page 17).
, Check that output of the Bluetooth
mobile phone is set for this unit., Check that the volume of the unit is
not set too low., Turn up the volume on the connected
Bluetooth mobile phone if necessary., If you are listening to music using
this unit, stop playback, press themulti function button and talk.
Low sound from recipient
, Turn up the volume of this unit., Turn up the volume on the connected
Bluetooth mobile phone if necessary.
7/27/2019 Sony Bluetooth DRCBT15
26/56
26US
Initializing theunitYou can reset this unit to its default(such as volume setting) and deleteall pairing information.
1 If this unit is turned on,press and hold thePOWER button forabout 3 seconds to turn
off this unit.
2 Press and hold thePOWER button andmulti function buttontogether for about7 seconds.The indicator (blue) and
indicator (red) flash togetherfour times, and this unit is resetto the default setting. All pairinginformation is deleted.
7/27/2019 Sony Bluetooth DRCBT15
27/56
27US
27
Wireless AudioReceiver
Power sourceDC 3.7 V: Built-in lithium-ionrechargeable battery
Dimension (w/h/d) (excludingprojection parts and controls)Approx. 16.8 68.5 15.5 mm(11/
16 2 3/
45/
8in.)
Mass (excluding accessories)Approx. 15 g (0.5 oz)
Headphones outputOutput jackStereo mini jack
Maximum output20 mW + 20 mW (16 )
Microphone
TypeElectret condenser
Direction characteristicOmni directional
Effective frequency range100 4,000 Hz
Operating temperature0 C to 45 C (32 F to 113 F)
Design and specifications are subject to
change without notice.
Specifications*2 Bluetooth standard profiles indicate
the purpose of Bluetoothcommunication between devices.
*3 Codec: Audio signal compression andconversion format
*4 Subband Codec
General
Communication SystemBluetooth Specification version 2.0 +EDR (Enhanced Data Rate)
OutputBluetooth Specification Power Class 2
Maximum communication rangeLine of sight approx. 10 m (30 ft) *1
Frequency band2.4 GHz band (2.4000 GHz 2.4835 GHz)
Modulation methodFHSS
Compatible Bluetooth Profiles*2
A2DP (Advanced Audio DistributionProfile)AVRCP (Audio Video Remote ControlProfile)HSP (Headset Profile)HFP (Hands-free Profile)
Supported Codecs*3
SBC*4, MP3
Supported content protectionmethodSCMS-T
Transmission range (A2DP)20 - 20,000 Hz (Sampling frequency44.1 kHz)
Supplied accessoryAC power adaptor (1)
Battery charging stand (1)Holding clip (1)Operating instructions (this book) (1)
Recommended accessoriesHeadphones: MDR-EX90LP(not supplied)
*1 The actual range will vary depending
on factors such as obstacles betweendevices, magnetic fields around a
microwave oven, static electricity,reception sensitivity, aerialsperformance, operating system,
software application, etc.
7/27/2019 Sony Bluetooth DRCBT15
28/56
2ES
ADVERTENCIAPara reducir el riesgo de incendioso electrocucin, no exponga elaparato a la lluvia ni a la humedad.
Para evitar descargas elctricas, noabra la unidad. En caso de avera,solicite los servicios de personalcualificado.
No site el aparato en un espacio cerrado,como una estantera o un armarioempotrado.
Para reducir el riesgo de incendios, nocubra la ventilacin del aparato con
peridicos, manteles, cortinas, etc. nicoloque velas encendidas encima del
mismo.
Para reducir el riesgo de incendio osacudida elctrica, no ponga objetos que
contengan lquido, tal como floreros,
encima del aparato.
Conecte el adaptador de alimentacin deca a una toma de ca de fcil acceso. Si
percibe alguna anormalidad en eladaptador de alimentacin de ca,
desconctelo inmediatamente de la tomade ca.
No exponga las pilas (la batera o las pilas
instaladas) a fuentes de calor excesivocomo luz solar, fuego o similar durante unperodo prolongado.
Una presin acstica excesiva de los
auriculares puede provocar prdidasauditivas.
InformacinSe le advierte de que la realizacin de
cambios o modificaciones no aprobadosexplcitamente en este manual puedenanular su autoridad para utilizar este
equipo.
El equipo no debe colocarse ni utilizarse
junto con ninguna otra antena otransmisor.
La marca de la palabra Bluetooth y sus
logotipos son propiedad de BluetoothSIG, Inc. y cualquier uso de los mismospor parte de Sony Corporation se realizabajo licencia.
Las dems marcas y nombres comercialespertenecen a sus respectivos propietarios.
Tecnologa de codificacin de audio
MPEG Layer-3 y patentes bajo licencia deFraunhofer IIS y Thomson.
7/27/2019 Sony Bluetooth DRCBT15
29/56
3ES
ES
ndice
Qu es la tecnologainalmbrica
Bluetooth? .................... 4Bienvenido ........................ 5
Funcionamiento del dispositivoBluetooth en slo 3 pasos ..... 6
Ubicacin y funcin de loscomponentes ................ 7
Carga de la unidad ........... 8
Emparejamiento ............. 10Qu es el emparejamiento? ... 10
Procedimientos deemparejamiento .................. 10
Utilizacin de launidad .......................... 12
Indicaciones de la funcinBluetooth ..................... 14
Escuchar msica ........... 15Control de audio del dispositivo
AVRCP ............................ 16
Realizacin dellamadas ...................... 17Control del telfono mvil
Bluetooth HFP y HSP ..... 19
Realizacin de llamadasdurante la reproduccinde msica .................... 20
Desecho de la unidad .... 21Precauciones .................. 22Solucin de problemas ... 24Inicializacin de la
unidad .......................... 26Especificaciones ............ 27
Para clientes de los EE UU
RECYCLADO DE BATERIASDE IONES DE LITIOLas bateras de
iones de litio son
reciclables. Ustedpodr ayudar a
conservar el medioambiente
devolviendo lasbateras usadas al
punto de reciclajemas cercano.
Para ms informacin sobre elreciclado de bateras, llame al
nmero gratuito1-800-822-8837, o visitehttp://www.rbrc.org/
Precaucin: No utilice bateras deiones de litio daadas o con fugas.
7/27/2019 Sony Bluetooth DRCBT15
30/56
4ES
Qu es la tecnologa inalmbricaBluetooth?
Perfiles Bluetooth compatibles:
A2DP (Advanced Audio DistributionProfile): Transmisin o recepcin de
contenido de audio de alta calidad. AVRCP (Audio Video Remote Control
Profile): Control del equipo de A/V;
pausa, detencin, inicio de lareproduccin, control de volumen, etc.
HSP (Headset Profile)*2: Hablar portelfono/Funcionamiento del telfono.
HFP (Hands-free Profile)*2: Hablar portelfono/Uso del telfono mediante la
funcin de manos libres.
*1 Velocidad de transmisin de datos
mejorada.*2 Cuando utilice un telfono mvil
Bluetooth compatible con lasfunciones HFP (Hands-free Profile) yHSP (Headset Profile), ajstelo enHFP.
Notas Para poder utilizar la funcin Bluetooth,
el dispositivo Bluetooth que deseaconectar debe tener el mismo perfil que
la unidad.Tenga en cuenta tambin que aunque
exista el mismo perfil, elfuncionamiento de los dispositivos
puede variar dependiendo de lasespecificaciones de estos. Debido a las caractersticas de la
tecnologa inalmbrica Bluetooth, elsonido que se reproduce en esta unidad
sufre un ligero retardo respecto alsonido que se reproduce en el
dispositivo Bluetooth cuando se hablapor telfono o se escucha msica.
Bluetooth es una tecnologainalmbrica de corto alcance quepermite la comunicacininalmbrica de datos entredispositivos digitales como, porejemplo, un ordenador o una cmaradigital. La tecnologa inalmbricaBluetooth funciona en un rango deaproximadamente 10 metros. Lohabitual es conectar dos
dispositivos, pero algunosdispositivos admiten la conexin avarios dispositivos a la vez. No esnecesario utilizar un cable pararealizar la conexin, ni tampoco esnecesario encarar los dispositivosentre s, como sucede con latecnologa de infrarrojos. Porejemplo, puede utilizar los
dispositivos en una bolsa o en unbolsillo. El estndar Bluetooth esuna convencin internacionalreconocida y utilizada por miles deempresas de todo el mundo.
Sistema de comunicaciny perfiles Bluetoothcompatibles de la unidad
Un perfil es una estandarizacin dela funcin para cada especificacindel dispositivo Bluetooth. Estaunidad es compatible con el perfil yla versin Bluetooth siguientes:
Sistema de comunicacin:
Especificacin Bluetooth versin 2.0 +EDR*1
7/27/2019 Sony Bluetooth DRCBT15
31/56
5ES
BienvenidoGracias por adquirir este receptor de audio inalmbrico de Sony. Esta unidadutiliza la tecnologa inalmbrica Bluetooth.
Disfrute de msica sin cables con reproductores con capacidad parautilizar la tecnologa Bluetooth o telfonos mviles.*1
Conecte sus auriculares favoritos a travs de la minitoma estreo (losauriculares se venden por separado).
Disfrute de las conversaciones de manos libres con telfonos mviles concapacidad para utilizar la tecnologa Bluetooth.*2
Controle las funciones bsicas del mando a distancia (reproduccin,detencin, etc.) del reproductor de msica a travs de la conexinBluetooth.*3
Bluetooth versin 2.0 + EDR (Enhanced Data Rate, velocidad detransmisin de datos mejorada) para ofrecer audio de calidad superior conmenos interferencias y menor consumo de energa.
Prctica funcin de recarga.
Para obtener ms informacin sobre la tecnologa inalmbrica Bluetooth,consulte la pgina 4.
*1 El dispositivo Bluetooth conectado debe ser compatible con el perfil A2DP
(Advanced Audio Distribution Profile).*2 El dispositivo Bluetooth conectado debe ser compatible con el perfil HFP (Hands-free
Profile) o HSP (Headset Profile).*3 El dispositivo Bluetooth conectado debe ser compatible con el perfil AVRCP
(Audio Video Remote Control Profile).
Escuchar msicaHablando portelfono
7/27/2019 Sony Bluetooth DRCBT15
32/56
6ES
VRealizar llamadasVEscuchar msica
VV
Funcionamiento del dispositivo Bluetooth en slo 3 pasos
Conexin BluetoothUtilice el dispositivo Bluetoothpara realizar la conexinBluetooth.
Conexin
Escuchar msicaEs posible escuchar msicareproducida en el dispositivoBluetooth.Esta unidad permite lasoperaciones de reproduccin,detencin e insercin de una pausa.
Conexin BluetoothCuando la unidad se enciende,sta empieza a realizar laconexin Bluetooth con eltelfono mvil reconocidoautomticamente.
Hablar por telfonoPuede realizar y recibir llamadasmediante esta unidad.
EmparejamientoEn primer lugar, registre (empareje) un dispositivo Bluetooth (telfono
mvil, etc.) y esta unidad entre s. Una vez que se haya establecido elemparejamiento, no ser necesario volver a realizarlo.
Voz
ConexinA2DP AVRCP
HFP HSP
TelfonosmvilesBluetooth, etc.
Receptor deaudioinalmbrico
Emparejamiento
Msica
cPginas 10 - 11
cPgina 15
cPginas 17 - 18
cPginas 18 - 20cPginas 15 - 16
7/27/2019 Sony Bluetooth DRCBT15
33/56
7ES
Ubicacin y funcin de loscomponentes
PROCEDIMIENTOS INICIALES
1 Toma de auriculares
2 Orificio para la correa
3 Orificio para el clip
4 Indicador (rojo)Indica el estado de laalimentacin de la unidad.
5 Micrfono6 Botn multifuncin
Controla varias funciones dellamada.
7 Indicador (azul)Indica el estado de lacomunicacin de la unidad.
VOL
POWER
VOL
.
.
Nx
7
9 q;
4
1
3
2
5
6
qa
8
8 Interruptor dedesplazamientoControla varias funcionescuando se escucha msica.Ajuste el volumen de la unidadcuando hable por telfono.
9 Botn RESET
0 Punto de contactoqa Botn POWER
7/27/2019 Sony Bluetooth DRCBT15
34/56
8ES
1 Conecte el adaptador dealimentacin de casuministrado con elsoporte de carga de labatera.
Carga de la unidadLa unidad contiene una batera de iones de litio recargable, que se debecargar antes de utilizarla por primera vez.
(Parte posterior)
a la tomaDC IN 3 V
Soporte de cargade la batera
(sumininstrado)
Adaptador dealimentacinde ca (suministrado)
3 Coloque la unidad en elsoporte de carga de labatera.
Coloque la unidad sobre el
soporte de carga de la batera demodo que el punto de contactode la unidad coincida con el pinde contacto de dicho soporte yasegrese de que el indicator(rojo) se ilumona.
La carga se completatranscurridas aproximadamente
2.5 horas* y el indicador (rojo)se apaga automticamente.
* Tiempo necesario para volver acargar una batera agotada.
NotaCuando coloque la correa en launidad, procure que no quede
atrapada entre la unidad y el soportede carga de la batera.
2 Conecte el adaptador dealimentacin de casuministrado a unatoma de corriente de ca.
DCIN
3V
Soporte de carga de labatera (suministrado)
a una toma de ca
Pin de contactoSoporte de cargade la batera(suministrado)
Receptor deaudio inalmbrico
7/27/2019 Sony Bluetooth DRCBT15
35/56
9ES
Estado
Completa
Media
Baja (debe
cargarla)
Sugerencias Si el adaptador de alimentacin de ca
est conectado a una toma de camientras la unidad est encendida, sta
se apagar automticamente. Esta unidad no puede encenderse
mientras se est cargando.
PrecaucinSi la unidad detecta un problemadurante la carga, es posible que elindicador (rojo) se apague aunqueno haya finalizado la carga.Compruebe si se debe a las causassiguientes:
La temperatura ambiental excedela gama entre los 0 C y los40 C.
La batera tiene un problema.
En este caso, crguela de nuevoentre las temperaturas indicadasanteriormente.Si el problema persiste, pngase encontacto con el distribuidor Sony
ms cercano.
Notas Si no se utiliza la batera durante un
perodo de tiempo prolongado, es
posible que la carga se agoterpidamente. Sin embargo, despus de
varias recargas, aumentar la duracin. Si la vida til de la batera recargable
incorporada disminuye hasta la mitad
de la duracin normal, la batera deberreemplazarse. Para reemplazar la
batera recargable, pngase en contactocon el distribuidor Sony ms cercano.
Evite la exposicin de la unidad atemperaturas extremas, la luz solar
directa, la humedad, la arena, el polvo olos golpes. No la deje nunca en unautomvil estacionado al sol.
Utilice nicamente el adaptador dealimentacin de ca suministrado. No
utilice ningn otro adaptador dealimentacin de ca.
Duracinaproximada
6 horas
100 horas
Duracin*
Estado
Tiempo de
comunicacin(incluido el tiempo
de reproduccin de
msica) (mximo)
Tiempo en
espera
(mximo)
* Estos tiempos pueden variar segn latemperatura ambiente o las condicionesde uso.
Comprobacin de labatera restanteSi pulsa el botn POWER mientrasla unidad est encendida, elindicador (rojo) parpadear. Puedecomprobar la batera restante
mediante el nmero de veces queparpadea el indicador (rojo).
Indicador (rojo)
3 veces
2 veces
1 vez
NotaNo puede comprobar la carga restanteinmediatamente despus de encender launidad o durante el emparejamiento.
Cuando la batera estprcticamente agotadaEl indicador (rojo) parpadea
lentamente de forma automtica.Cuando la batera se agota porcompleto, suena un pitido y launidad se apaga automticamente.
7/27/2019 Sony Bluetooth DRCBT15
36/56
10ES
Emparejamiento
Qu es el
emparejamiento?Los dispositivos Bluetooth debenemparejarse previamente entre s.Una vez que los dispositivosBluetooth se han emparejado, no esnecesario volver a hacerlo exceptoen los casos siguientes: La informacin de
emparejamiento se elimina trasuna reparacin, etc. La unidad est emparejada con 9
dispositivos o ms.Esta unidad se puede emparejarhasta con 8 dispositivos; si seempareja un noveno dispositivo,ste reemplazar al ms antiguode los 8 restantes.
Cuando se elimina el
reconocimiento de la unidad en eldispositivo que desea conectar.
Se ha inicializado esta unidad(pgina 26).Se elimina toda la informacin deemparejamiento.
Procedimientos de
emparejamiento
1 Coloque el dispositivoBluetooth a menos de 1metro de esta unidad.
2 Mantenga pulsado elbotn POWER durante
ms de 7 segundos paraponer en espera elemparejamientomientras la unidad sedesconecta.
Notas Transcurridos 3 segundos, la
alimentacin se enciende y los
indicadores (azul) y (rojo)parpadean juntos dos veces.Mantenga pulsado el botn
POWER. El indicador (azul)empieza a parpadear. Cuando
ambos indicadores comiencen aparpadear juntos, suelte el botn.La unidad pasa al modo de
emparejamiento.
7/27/2019 Sony Bluetooth DRCBT15
37/56
11ES
Si el emparejamiento no se haestablecido en unos 5 minutos, el
modo de emparejamiento secancelar y la unidad se apagar.En tal caso, vuelva a comenzar
desde el paso 1.
3 Realice elprocedimiento deemparejamiento en eldispositivo Bluetoothpara que detecte estaunidad.La lista de los dispositivosdetectados aparecer en lapantalla del dispositivoBluetooth.Esta unidad semuestra como DRC-BT15.Si no aparece DRC-BT15,repita el procedimiento desde elpaso 1.
Notas Para obtener ms informacin,
consulte el manual deinstrucciones que se suministrajunto con el dispositivo Bluetooth.
Cuando realice el emparejamientocon un dispositivo Bluetooth queno pueda mostrar una lista de
dispositivos detectados o nodisponga de pantalla, puede
emparejar el dispositivo medianteel ajuste de la unidad y del
dispositivo Bluetooth en modo deemparejamiento. En estemomento, si la clave de acceso no
est ajustada en 0000 en eldispositivo Bluetooth, no es
posible emparejar la unidad.
4 SeleccioneDRC-BT15 en la
pantalla del dispositivoBluetooth.
5 Si se solicita laintroduccin de unacontrasea* en lapantalla del dispositivoBluetooth, introduzca
0000.El emparejamiento finalizacuando el indicador (azul)parpadea lentamente. En lapantalla de algunos dispositivosBluetooth aparece un mensajeque indica emparejamientofinalizado.
* La contrasea puede denominarseclave de acceso, cdigo PIN,nmero PIN o cdigo de
acceso.
6 Inicie la conexinBluetooth desde eldispositivo Bluetooth.La unidad memoriza estedispositivo como el ltimo alque se ha conectado.Es posible que algunosdispositivos Bluetooth seconecten automticamente a estaunidad al finalizar elemparejamiento.
Sugerencias Para realizar un emparejamiento con
otros dispositivos Bluetooth, repita lospasos del 1 al 5 para cada dispositivo. Para eliminar toda la informacin de
emparejamiento, consulteInicializacin de la unidad
(pgina 26).
7/27/2019 Sony Bluetooth DRCBT15
38/56
12ES
Utilizacin de la unidad
3 Conecte los auriculares(no suministrados) a launidad.
4 Culguese la unidad enun bolsillo o similar dealguna prenda de ropa y,a continuacin, pngaselos auriculares.Pngase el auricular con lamarcaL en la oreja izquierda yel auricular con la marcaRen la derecha.
Si utiliza el clip1 Mientras sujeta la
palanca del extremo delclip (suministrado),sujete el clip en launidad como se muestray, a continuacin,insrtelo en el orificio.
2 Mientras sujeta lapalanca, gire la unidaden el sentido contrario alas agujas del reloj.Cuando suelte la palanca, el clipquedar bloqueado para evitarque se desprenda.
Palanca
7/27/2019 Sony Bluetooth DRCBT15
39/56
13ES
Si utiliza la correa1 Fije la correa (no
suministrada) en launidad a travs delorificio para la correa.
2 Conecte los auriculares(no suministrados) a launidad.
3 Psese la unidadalrededor del cuello y, acontinuacin, pngaselos auriculares.Pngase el auricular con lamarcaL en la oreja izquierda yel auricular con la marcaRen la derecha.
7/27/2019 Sony Bluetooth DRCBT15
40/56
7/27/2019 Sony Bluetooth DRCBT15
41/56
15ES
VOL
VOL
. .Nx
Escuchar msica
Antes utilizar la unidad, compruebelos puntos siguientes.
El dispositivo Bluetooth estencendido.
Ha finalizado el emparejamientode esta unidad y el dispositivoBluetooth.
El dispositivo Bluetooth admite lafuncin de transmisin de msica(perfil: A2DP*).
1 Con la unidad apagada,mantenga pulsado elbotn POWER duranteaproximadamente3 segundos.Los indicadores (azul) y (rojo)parpadean dos veces juntos y launidad se enciende.
Notas No debe mantener pulsado el botn
POWER durante ms de 7
segundos, en ese caso, la unidadpasar al modo de emparejamiento.
Una vez activada la unidad, sta
intenta conectarse automticamenteal ltimo dispositivo Bluetooth al
que se conect con HFP o HSP.
USO DE LA UNIDAD
Cuando no realice llamadas con la
unidad, no deje el ltimodispositivo Bluetooth conectado
preparado para realizar unaconexin HFP o HSP. Para realizar
o recibir llamadas mientras escuchamsica, consulte la pgina 20.
2 Realice la conexinBluetooth (A2DP) desdeun dispositivoBluetooth a esta unidad.
Consulte el manual deinstrucciones suministrado conel dispositivo Bluetooth parasaber como realizarla.
3 Inicie la reproduccindel dispositivoBluetooth.
Sugerencia
La conexin Bluetooth de A2DP(Advanced Audio Distribution Profile)tambin se puede realizar utilizando elinterruptor de desplazamiento de estaunidad al dispositivo Bluetooth exceptocuando se haga una llamada a dichaunidad.
Notas Cuando reproduzca msica mediante la
conexin de la unidad a un dispositivo
Bluetooth con HSP (Headset Profile), lacalidad del sonido no ser alta. Para unamejor calidad de sonido, cambie laconexin Bluetooth a A2DP utilizandoel dispositivo Bluetooth.
Si se apaga la unidad cuando se haestablecido una conexin BluetoothA2DP, vuelva a ponerla enfuncionamiento desde el paso 1 pararealizar de nuevo la conexin BluetoothA2DP.
* Para obtener ms informacin sobre losperfiles, consulte la pgina 4.
Botn POWER
Contina
Interruptor dedesplazamiento
7/27/2019 Sony Bluetooth DRCBT15
42/56
16ES
Consulte el manual de instruccionessuministrado con el dispositivoBluetooth para saber comorealizarla.
Nota
La utilizacin del dispositivo Bluetoothque desea conectar variar dependiendode las especificaciones.
Estado: En modo de detencin ode pausa
1 Inicia la reproduccin*1
2 Parada3 Saltar a la siguiente/a la anterior4 Avance/rebobinado rpido*2
Estado: En modo dereproduccin
5 Pausa*1
6 Parada7 Saltar a la siguiente/a la anterior8 Avance/rebobinado rpido*2
*1
Es posible que necesite pulsar elbotn dos veces segn el dispositivo
Bluetooth.*2 Es posible que algunos dispositivos
Bluetooth no funcionen.
NotaPara ajustar el volumen del dispositivo
Bluetooth, no puede presionar elinterruptor de desplazamiento hacia arriba
o hacia abajo.
Para ajustar el volumenPresione el interruptor dedesplazamiento hacia arriba o haciaabajo mientras escucha msica paraajustar el volumen.
Sugerencias En funcin del dispositivo que conecte,es posible que tambin deba ajustar el
volumen en dicho dispositivo. El volumen para realizar llamadas y
escuchar msica se puede ajustar deforma independiente. Aunque
modifique el volumen mientras realizauna llamada, el volumen de lareproduccin de msica no variar.
Para detener el uso
1 Para finalizar laconexin Bluetoothhaga funcionar eldispositivo Bluetooth.
2 Mantenga pulsado elbotn POWER duranteunos 3 segundos.Los indicadores (azul) y (rojo)se iluminan a la vez y la unidadse apaga.
SugerenciaCuando finalice la reproduccin de
msica, es posible que la conexin
Bluetooth finalice automticamente,segn el dispositivo Bluetooth que seutilice.
Control de audio deldispositivo AVRCP
Si el dispositivo de audio Bluetooth
conectado con esta unidad admiteAVRCP (Audio Video RemoteControl Profile), podr controlarlomediante los botones de la unidad.
Pulsar Mantener
pulsadoNx
./>
5
7
6
8
Pulsar Mantenerpulsado
Nx
.
/>
1
3
2
4
7/27/2019 Sony Bluetooth DRCBT15
43/56
17ES
mvil Bluetooth transcurrido 1minuto. En ese caso, pulse el botnmultifuncin para intentar conectar
de nuevo.
Si la unidad no se conectaa un telfono mvilBluetooth automticamentePuede realizar una conexinutilizando el telfono mvilBluetooth o esta unidad paraconectarse al ltimo dispositivo
Bluetooth al que se ha conectado.
A Para usar el telfonomvil Bluetooth pararealizar la conexin
1 Realice la conexinBluetooth (HFP o HSP*)desde el telfono mvil
Bluetooth a esta unidad.Para obtener ms informacin sobreel procedimiento a seguir, consulteel manual suministrado con eltelfono mvil Bluetooth.La lista de dispositivos reconocidosaparecer en la pantalla del telfonomvil Bluetooth. Esta unidadaparece como DRC-BT15.
Cuando utilice las funciones HFP(Hands-free Profile) y HSP(Headset Profile) del telfono mvilBluetooth, ajstelo en HFP.
NotaSi desea conectarse con un telfonomvil Bluetooth distinto del que seconect la ltima vez, siga elprocedimiento anterior.
* Para obtener ms informacinsobre los perfiles, consulte lapgina 4.
Antes de utilizar la unidad,compruebe los puntos siguientes.
La funcin Bluetooth estactivada en el telfono mvil.
Ha finalizado el emparejamientode esta unidad y el telfono mvilBluetooth.
1 Con la unidad apagada,mantenga pulsado elbotn POWER duranteaproximadamente3 segundos.Los indicadores (azul) y (rojo)parpadean juntos dos veces, launidad se enciende y, a
continuacin, sta intentaconectarse automticamente alltimo telfono mvil Bluetoothque se ha usado.
NotaNo debe mantener pulsado el botnPOWER durante ms de 7 segundos,en ese caso, la unidad pasar al modode emparejamiento.
SugerenciaEsta unidad dejar de intentarestablecer conexin con el telfono
Realizacin de llamadas
VOL
VOL
. .Nx
Botn POWER
Contina
Interruptor dedesplazamiento
Botn multifuncin
7/27/2019 Sony Bluetooth DRCBT15
44/56
18ES
B Para usar esta unidadpara realizar unaconexin con el ltimodispositivo Bluetooth alque se ha conectado
1 Pulse el botnmultifuncin de launidad.Los indicadores (azul) y (rojo)empiezan a parpadear a la vez yla unidad realiza la conexindurante unos 5 segundos.
NotaNo es posible establecer una conexinBluetooth con el botn multifuncin
mientras se escucha msica en estaunidad.
Para llamar
1 Utilice los botones deltelfono mvil para
realizar llamadas.Si la unidad no emite ningntono de llamada, mantengapulsado el botn multifuncindurante unos 2 segundos.
SugerenciaPuede realizar llamadas de la manerasiguiente, dependiendo del telfono mvil
Bluetooth que utilice. Para obtener ms
informacin sobre el funcionamiento,consulte el manual suministrado con el
telfono mvil Bluetooth. Cuando se realicen comunicaciones,
podr llamar utilizando la funcin demarcacin por voz si pulsa el botn
multifuncin. Para llamar al ltimo nmero marcado,
pulse el botn multifuncin durante
unos 2 segundos.
Para recibir una llamadaAl recibir una llamada entrante, oirun tono de llamada de la unidad.
1 Pulse el botnmultifuncin de la
unidad.El tono de llamada vara de lasformas siguientes, dependiendodel telfono mvil.
tono de llamada ajustado en launidad
tono de llamada ajustado en eltelfono mvil
tono de llamada ajustado en el
telfono mvil slo para laconexin Bluetooth
NotaSi puls el botn del telfono mvilBluetooth para recibir una llamada, tenga
en cuenta que es probable que algunostelfonos tengan activada la prioridad
para utilizar el telfono. En este caso,ajstelo para hablar con la unidad
manteniendo pulsado el botnmultifuncin durante unos 2 segundos o
bien realice el ajuste desde el telfonomvil Bluetooth. Para obtener msinformacin, consulte el manual
suministrado con el telfono mvilBluetooth.
Para ajustar el volumenPresione el interruptor de
desplazamiento hacia arriba o haciaabajo para ajustar el volumen.
Sugerencias No puede ajustar el volumen cuando no
se realicen comunicaciones.
El volumen para realizar llamadas yescuchar msica se puede ajustar de
forma independiente. Aunquemodifique el volumen mientras
reproduce msica, el volumen de lallamada no variar.
7/27/2019 Sony Bluetooth DRCBT15
45/56
19ES
Para finalizar una llamadaPara finalizar una llamada puedepresionar el botn multifuncin dela unidad.
Para detener el uso
1 Termine lascomunicacionesBluetooth en el telfonomvil.
2 Para apagar laalimentacin de la
unidad, mantengapulsado el botnPOWER durante unos3 segundos.Los indicadores (azul) y (rojo)se iluminan a la vez y la unidadse apaga.
Control del telfonomvil Bluetooth HFP y HSP
El uso de los botones de esta unidadvara dependiendo del telfonomvil que utilice.Para efectuar el emparejamiento con
un telfono mvil Bluetooth seutiliza el perfil HFP (Hands-freeProfile) o HSP (Headset Profile).Consulte el manual de instruccionessuministrado junto con el telfonomvil para obtener informacinsobre los perfiles Bluetoothadmitidos y cmo funcionan.
HFP (Hands-free Profile)
HSP (Headset Profile)
Estado Botn multifuncin
En espera
Activa la
marcacin por
voz
Llamada
saliente
Llamada
entranteDurante la
llamada
Pulsar
Inicia la
marcacin
por voz*1
Cancela la
marcacin
por voz*1
Fin de la
llamada
saliente
Responde a la
llamadaFinaliza la
llamada
Mantener
pulsado
Repite la
marcacin del
ltimo
nmero
Rechaza la
llamadaCambio de
dispositivo de
llamada
Estado Botn multifuncin
En esperaLlamada
saliente
Llamada
entrante
Durante lallamada
Pulsar
Fin de la
llamada
saliente*1
Responde a la
llamada
Finaliza lallamada*3
Mantener
pulsado
Marcacin*1Fin de la
llamada
saliente o
cambio del
dispositivo de
llamada a los
auriculares*2
Cambio deldispositivo de
llamada a los
auriculares
*1 Es posible que algunas funciones nose admitan dependiendo del telfonomvil Bluetooth. Consulte lasinstrucciones de uso suministradascon su telfono mvil.
*2 Puede variar en funcin del telfono
mvil Bluetooth utilizado.*3 Es posible que algunas funciones no
se admitan cuando se realice unallamada mediante el telfono mvilBluetooth.
7/27/2019 Sony Bluetooth DRCBT15
46/56
20ES
Realizacin de llamadas durante lareproduccin de msicaLa conexin Bluetooth con HFP o HSP, as como con A2DP, es necesariapara realizar una llamada mientras reproduce msica.Por ejemplo, para realizar una llamada con un telfono mvil Bluetoothmientras escucha msica en un reproductor de msica compatible conBluetooth, esta unidad debe estar conectada al telfono mvil con HFP oHSP.
Para realizar una conexin Bluetooth entre esta unidad yel dispositivo que utiliza, siga el procedimiento que sedescribe a continuacin.
1 Realice una conexin Bluetooth entre esta unidad y eltelfono mvil que utiliza con HFP o HSP a travs delos procedimientos que se describen en Realizacinde llamadas (consulte la pgina 17).
2 Utilice el dispositivo Bluetooth (reproductor demsica o telfono mvil) que utiliza para reproducirmsica para realizar una conexin Bluetooth con estaunidad mediante A2DP.
1 Pulse el botnmultifuncin de launidad y hable.Cuando termine la llamada,pulse el botn multifuncin. Launidad vuelve a reproducir lamsica.
Si no se oye el tono dellamada al recibir unallamada entrante
1 Detenga lareproduccin demsica.
2 Cuando suene el tono,pulse el botnmultifuncin de launidad y hable.
Para realizar una llamadamientras escucha msica
1 Pulse el botnmultifuncin durante lareproduccin de msica(pgina 19) o utilice eltelfono mvil
Bluetooth para haceruna llamada.Si la unidad no emite ningntono de llamada, mantengapulsado el botn multifuncindurante unos 2 segundos.
Para recibir una llamadamientras escucha msicaAl recibir una llamada entrante, lamsica se detendr y se oir un tonode llamada de la unidad.
7/27/2019 Sony Bluetooth DRCBT15
47/56
21ES
Desecho de la unidadEsta unidad dispone de una batera recargable de iones de litio incorporada.Para una mejor conservacin del medio ambiente, asegrese de retirar la
batera recargable incorporada antes de deshacerse de la unidad y proceda aldesecho de dicha batera de la forma adecuada.
INFORMACIN COMPLEMENTARIA
1 Extraiga los tornillos(2 unidades) de la parteposterior de la unidad.
2 Levante el lado quecontiene el orificio para
la correa para extraer latapa.
3 Tire del conector.Deseche la batera recargable sinsacarla de la tapa.
NotaNo retire la batera recargable de la tapa,ya que podra estropearse.
Batera recargable
7/27/2019 Sony Bluetooth DRCBT15
48/56
22ES
PrecaucionesComunicacin Bluetooth La tecnologa inalmbrica Bluetooth
funciona en un rango deaproximadamente 10 metros.El rango mximo de comunicacin
puede variar en funcin de losobstculos (persona, objetos metlicos,
paredes, etc.) o del entornoelectromagntico.
La antena est incorporada en la unidad
como se muestra con la lnea de puntos.La sensibilidad de la comunicacin
Bluetooth mejorar al girar la antenaincorporada en la unidad hacia el
dispositivo Bluetooth connectado.La distancia de comunicacin se reducecuando existen obstculos entre laantena del dispositivo conectado y estaunidad.
Las condiciones siguientes puedenafectar la sensibilidad de la
comunicacin Bluetooth. La existencia de obstculos como,
por ejemplo, una persona, un objetometlico o una pared entre estaunidad y el dispositivo Bluetooth.
El uso de dispositivos que utilicenuna frecuencia de 2,4 GHz como, por
ejemplo, un dispositivo LANinalmbrico, un telfono inalmbricoo un microondas cerca de la unidad.
Como los dispositivos Bluetooth y lasLAN inalmbricas (IEEE802.11b/g)
utilizan la misma frecuencia, puedenproducirse interferencias demicroondas que provoquen el
deterioro de la velocidad de la
comunicacin, la aparicin de ruido ouna conexin no vlida si la unidad seutiliza cerca de un dispositivo LAN
inalmbrico. En este caso, realice elprocedimiento siguiente. Utilice esta unidad a una distancia
mnima de 10 m del dispositivoLAN inalmbrico.
Si utiliza esta unidad a menos de10 m de un dispositivo LAN
inalmbrico, apague el dispositivoLAN inalmbrico.
Instale esta unidad y el dispositivoBluetooth a la distancia ms cortaposible entre s.
Las microondas que emite undispositivo Bluetooth pueden afectarel funcionamiento de dispositivosmdicos electrnicos. Apague estaunidad y los dems dispositivos
Bluetooth en los lugares siguientes,ya que podran provocar un accidente: donde exista gas inflamable, en un
hospital, tren, avin o gasolinera cerca de puertas automticas o
alarmas de incendios
Esta unidad admite capacidades deseguridad que cumplen con el
estndar Bluetooth para proporcionaruna conexin segura al utilizar la
tecnologa inalmbrica Bluetooth,pero es posible que la seguridad nosea suficiente segn el ajuste. Tenga
cuidado al realizar una comunicacincon la tecnologa inalmbrica
Bluetooth. No se aceptan responsabilidades por
la prdida de informacin que pudieraproducirse durante una comunicacin
Bluetooth.
Ubicacin de la
antena incorporada
7/27/2019 Sony Bluetooth DRCBT15
49/56
23ES
No se puede garantizar la conexin contodos los dispositivos Bluetooth.
Un dispositivo que disponga de lafuncin Bluetooth debe cumplir elestndar Bluetooth especificado por
Bluetooth SIG, Inc. y estar
autenticado. Incluso en el caso de que eldispositivo conectado cumpla el
estndar Bluetooth mencionadoanteriormente, es posible que algunos
dispositivos no puedan conectarse ofuncionar correctamente, segn lascaractersticas o las especificaciones
del dispositivo. Mientras est hablando con el manos
libre del telfono, puede producirseruido, segn el dispositivo o el
entorno de comunicacin. En funcin del dispositivo que vaya
conectarse, es posible que transcurra
cierto tiempo antes de que se inicie lacomunicacin.
Adaptador de alimentacin de casuministrado Utilice solamente el adaptador de
alimentacin de ca suministrado con
esta unidad. No utilice ningn otroadaptador de alimentacin de ca, ya quepuede causar un mal funcionamiento de
la unidad.
Polaridad de la clavija
Si no va a utilizar la unidad durante unperodo prolongado de tiempo,desconecte el adaptador de
alimentacin de ca de la toma de ca.Para retirar el adaptador de
alimentacin de ca de la toma decorriente de pared, tire del adaptador,
nunca del cable.
Otros No coloque esta unidad en lugares
expuestos a humedad, polvo, holln,vapor o luz solar directa, ni la deje en
un automvil en espera ante una sealde trfico. Se pueden producir fallos de
funcionamiento. No utilice la correa en un lugar donde
pueda quedar atrapada, como una
desfibradora, una instalacin demaquinaria, etc.
Es posible que el dispositivo Bluetoothno funcione en telfonos mviles
dependiendo del estado de las ondas deradio y del lugar donde se utilice elequipo.
Si no se siente cmodo despus deutilizar el dispositivo Bluetooth, deje de
utilizarlo inmediatamente. Si elproblema persiste, consulte con el
distribuidor Sony ms cercano. Si usa la unidad a un volumen alto,
puede sufrir daos en los odos. Por
razones de seguridad vial, no la utilicemientras conduce o va en bicicleta.
No coloque ningn peso ni ejerza
presin sobre la unidad, ya que stapodra deformarse durante perodos dealmacenamiento prolongado.
Si desea realizar alguna consulta osolucionar algn problema relativo a launidad que no se trate en este manual,
pngase en contacto con el distribuidorSony ms cercano a su domicilio.
7/27/2019 Sony Bluetooth DRCBT15
50/56
24ES
Solucin de problemasSi tiene dificultades para utilizar esta unidad, srvase de la siguiente lista decomprobaciones y consulte la informacin de ayuda del producto en nuestro
sitio Web.Si el problema persiste, consulte con el distribuidor Sony ms cercano.
ComnLa unidad no estencendida., Cargue la batera de la unidad., La unidad no est encendida mientras
se carga. Retire la unidad del soporte
de carga de batera y encindala.
No se puede llevar a caboel emparejamiento., Acerque esta unidad y el dispositivo
Bluetooth.
No se ha realizado laconexin Bluetooth., Compruebe que la unidad est
encendida., Compruebe que el dispositivoBluetooth que desea conectar estencendido y que la funcin Bluetoothest activada.
, Es posible que la unidad no
memorice la conexin con eldispositivo Bluetooth. Realice laconexin Bluetooth del dispositivo
Bluetooth a la unidad inmediatamentedespus de finalizar el
emparejamiento., Esta unidad o el dispositivo Bluetooth
que desea conectar est en modo enespera.
, Ha finalizado la conexin Bluetooth.Realice la conexin Bluetooth denuevo (cuando escuche msica:
consulte la pgina 15 y cuandorealice llamadas: consulte la
pgina 17).
El sonido aparecedistorsionado., Asegrese de que la unidad no est
recibiendo interferencias de una redLAN inalbrica, de algn otrodispositivo inalmbrico de 2,4 GHzni de un microondas.
La distancia decorrespondencia esdemasiado corta. (Seproducen saltos delsonido.), Si hay cerca un dispositivo que
genera radiacin electromagnticacomo, por ejemplo, una LANinalmbrica, otro dispositivo
Bluetooth o un microondas, aleje launidad de estas fuentes., Oriente la antena de la unidad (pgina
22) hacia el dispositivo Bluetooth.Asegrese de que ningn obstculobloquea la comunicacin.
La unidad no funcionacorrectamente., Reinicie la unidad. La informacin de
los pares no se borra con esta
operacin.Inserte un pequeo pasador, etc., enel orificio con cierto ngulo y empuje
hasta escuchar un chasquido.
7/27/2019 Sony Bluetooth DRCBT15
51/56
25ES
Al escuchar msica
No hay sonido, Compruebe que tanto la unidad como
el dispositivo Bluetooth estn
encendidos., No se ha establecido la conexin
Bluetooth A2DP entre la unidad y el
dispositivo Bluetooth. Realice unaconexin Bluetooth A2DP (pgina 15).
, Compruebe que se reproduce msicaen el dispositivo Bluetooth.
, Compruebe que el volumen de launidad no est demasiado bajo.
, Si es necesario, suba el volumen del
dispositivo conectado., Vuelva a emparejar la unidad y el
dispositivo Bluetooth (pgina 10).
El nivel del sonido es bajo, Suba el volumen de la unidad.
, Si es necesario, suba el volumen deldispositivo conectado.
Sonido de baja calidad, Cambie la conexin Bluetooth a
A2DP (Advanced Audio DistributionProfile) cuando se ajuste HSP
(Headset Profile).
No es posible realizar unaconexin Bluetooth desdeun dispositivo Bluetooth aesta unidad., El dispositivo Bluetooth no dispone
de proteccin de contenido
SCMS-T*. Mantenga pulsado elbotn POWER yNx durante unos
7 segundos para desactivar laproteccin SCMS-T mientras la
unidad est apagada. El indicador(azul) parpadear una vez.
* El sistema de proteccin decontenido SCMS-T es uno de los
mtodos de proteccin decontenidos transmitidos mediantela tecnologa inalmbrica
Bluetooth. Esta unidad est
preparada para recibir contenidoprotegido por este sistema.Mantenga pulsado el botn
POWER yNx otra vez duranteunos 7 segundos para activar denuevo el sistema de proteccin de
contenido SCMS-T en la unidad. Elindicador (azul) parpadear dos
veces.
Se producen saltosfrecuentes en el sonidodurante la reproduccin., Es posible que la recepcin de la
unidad se haya vuelto inestabledebido a que los ajustes de la
velocidad de bits de la msicatransmitida no corresponden a los del
dispositivo Bluetooth y el entorno enque se utiliza la unidad. *1
Finalice la conexin Bluetooth A2DPmediante el dispositivo Bluetooth.
Con la unidad encendida, mantengapulsadoNx duranteaproximadamente 7 segundos para
reducir la velocidad de bits. *2
*1 La velocidad de bits es un valor
numrico que expresa el volumende transmisin de datos por
segundo. Como norma general,cuanto ms alta sea la velocidad debits, mejor ser la calidad del
sonido. Esta unidad est preparadapara recibir msica con una alta
velocidad de bits; no obstante, esposible que se produzcan saltos en
el sonido en funcin del entorno enque se utilice.
Contina
7/27/2019 Sony Bluetooth DRCBT15
52/56
26ES
*2 Cuando se completa el ajuste develocidad de bits, el indicador
(azul) parpadea una vez. Enfuncin del entorno en que seutilice la unidad, es posible que las
operaciones anteriores no reduzcan
los saltos en el sonido. Pararestablecer los ajustes originales,mantenga pulsadoNx de nuevo
durante unos 7 segundos. Elindicador (azul) parpadear dos
veces.
Al realizar llamadas
No se escucha la voz deldestinatario de la llamada., Compruebe que tanto la unidad como
el telfono mvil Bluetooth estnencendidos.
, Compruebe la conexin de la unidadcon el telfono mvil Bluetooth.Vuelva a realizar una conexin
Bluetooth (HFP o HSP) (pgina 17)., Compruebe que la salida del telfono
mvil Bluetooth est ajusta para estaunidad.
, Compruebe que el volumen de launidad no est demasiado bajo.
, Si es necesario, aumente el volumendel telfono mvil Bluetoothconectado.
, Si escucha msica en la unidad,detenga la reproduccin, pulse el
botn multifuncin y hable.
El sonido del destinatariode la llamada es bajo, Suba el volumen de la unidad., Si es necesario, aumente el volumen
del telfono mvil Bluetoothconectado.
Inicializacin dela unidadPuede restablecer la unidad a laconfiguracin predeterminada (ascomo el volumen) y eliminar lainformacin de emparejamiento.
1 Si la unidad estencendida, mantengapulsado el botn
POWER durante unos3 segundos paraapagarla.
2 Mantenga pulsados losbotones POWER ymultifuncin a la vezdurante unos
7 segundos.Los indicadores (azul) y (rojo)parpadearn juntos cuatro vecesy la unidad se restablecer a losajustes predeterminados. Toda lainformacin de emparejamientose elimina.
7/27/2019 Sony Bluetooth DRCBT15
53/56
27ES
EspecificacionesGenerales
Sistema de comunicacinEspecificacin Bluetooth versin 2.0 +EDR (Velocidad de transmisin de datosmejorada)
SalidaClase de potencia 2 de especificacinBluetooth
Rango de comunicacin mximoLnea de vista de aprox. 10 m*1
Banda de frecuenciaBanda de 2,4 GHz (2,4000 GHz 2,4835 GHz)
Mtodo de modulacinFHSS
Perfiles Bluetooth compatibles*2A2DP (Advanced Audio DistributionProfile)AVRCP (Audio Video Remote ControlProfile)
HSP (Headset Profile)HFP (Hands-free Profile)
Cdecs admitidos*3SBC*4, MP3
Sistema de proteccin decontenido admitidoSCMS-T
Intervalo de transmisin (A2DP)20 20.000 Hz (frecuencia de muestreode 44,1 kHz)
Accesorio suministradoAdaptador de alimentacin de ca (1)Soporte de carga de la batera (1)Clip de sujecin (1)Manual de instrucciones(este documento) (1)
Accesorios recomendadosAuriculares: MDR-EX90LP(no suministrados)
*1 El rango real variar en funcin defactores como, por ejemplo, losobstculos que puedan interponerse entrelos dispositivos, los campos magnticos
que puedan existir en torno a hornosmicroondas, la electricidad esttica,interferencias, las condiciones de las
ondas radioelctricas, la sensibilidad derecepcin o el rendimiento de la antena,del sistema operativo, de la aplicacin desoftware, etc.
*2 Los perfiles estndar Bluetooth indicanla finalidad de la comunicacinBluetooth entre dispositivos.
*3 Cdec: formato de conversin ycompresin de seales de audio
*4 Cdec de banda secundaria
Receptor de audioinalmbrico
Fuente de alimentacincc de 3,7 V: batera recargable de iones delitio incorporada
Dimensiones (an/al/prf) (sin incluirpartes y controles salientes)
Aprox. 16,8 68,5 15,5 mmMasa (sin incluir los accesorios)Aprox. 15 g
Salida de auricularesToma de salidaMinitoma estreo
Potencia de salida mxima20 mW + 20 mW (16 )
MicrfonoTipoCondensador de electreto
Caractersticas de direccinOmnidireccional
Gama de frecuencia efectiva100 4.000 Hz
Temperatura de funcionamientoDe 0 C a 45 C
El diseo y las especificaciones estnsujetos a cambios sin previo aviso.
7/27/2019 Sony Bluetooth DRCBT15
54/56
7/27/2019 Sony Bluetooth DRCBT15
55/56
7/27/2019 Sony Bluetooth DRCBT15
56/56