For product-specific data sheets or to download Elements® Design Software, which gives you the ability to prepare comprehensive design calculations, visit our website.
The right product, the right choiceThe floor and roof decking market offers a wide range of competitive products from various manufacturers. Choosing the correct one to suit your project needs can be confusing. With our comprehensive range of profiles, SMD have the experience, knowledge and expertise to help you decide.
When selecting the type of deck profile to use there are many factors that need to be considered. These include span, loadings, cost and speed of installation amongst others.
This guide provides a useful quick reference detailing product properties, typical spans and compares the strengths of each product (shown in the last five columns). The information included is only intended as a guide and is no substitution to talking directly to one of our Sales or Technical Teams, who will be able to assess in more depth the project specific requirements and most appropriate product.
If you need further help Contact our Technical team on 01202 718 898 or [email protected]
Product Specification
4
TABLE KEY *Cantilever values indicated for floor deck are governed by Health and Safety during installation. **The maximum span values in Table 8.1a are based on the following design criteria: Imposed Load of 1.5kN/m² or Line Load of 2kN/m, Partial Load Factor of 1.5 (considering all load as ‘Variable’), Imposed Load Deflection Limit of Span/200, Wind Uplift of 1.5kN/m², subject to appropriate fixings, Wind Uplift Deflection Limit of Span/90. ***The maximum cantilever figures indicated in this document are based on a point load of 0.9kN positioned at the end of the cantilever. ++Recommended maximum sheet lengths are limited due to site Health and Safety manual handling guidelines.
Based on slab depths of 175 - 130mm
Product Selector based on profile strengths (3 ticks being the strongest)
Floor Profiles Sectional Detail Steel Grade N/mm2
Available Coatings
Nominal Thickness
mmWeightkg/m2
Moment of Inertia cm4/m
Height of Neutral
Axis mm
Area of Steel
mm2/m
Concrete Volumem3/m2
Crushed Ends
Max. Single Span m
(unpropped)
Max. Double Span m
(unpropped)
Max. Recommended
Cantilever m (unpropped)*
Max. Recommended Sheet Length ++
Span Cost Speed Aesthetics Load
51
600 Cover Width
15040
137
R51S350 or S450 Galv. (Z275)
HD (ZM310) 0.9 12.90 62.3 16.9 1580(slab
depth/ 1000)
- 0.009No
2.3 - 2.6 2.7 - 3.0 0.45 10.0 ü ü üü üüü üüü
S350 or S450 Galv. (Z275)HD (ZM310) 1.0 14.35 71.0 16.9 1764 2.5 - 2.9 2.9 - 3.2 0.45 9.0 ü ü üü üüü üüü
S350 or S450 Galv. (Z275)HD (ZM310) 1.2 17.23 87.7 16.8 2131 2.6 - 3.1 3.2 - 3.5 0.45 7.5 ü ü üü üüü üüü
1000 Cover width
333
133
6012
158
TR60S350 or S450 Galv. (Z275)
HD (ZM310) 0.9 10.03 93.5 33.6 1216(slab
depth/ 1000)
- 0.034No
2.3 - 2.6 2.9 - 3.5 0.45 9.5 üü üüü üüü üü üü
S350 or S450 Galv. (Z275)HD (ZM310) 1.0 11.12 102.1 33.6 1355 2.5 - 2.9 3.1 - 3.8 0.45 8.5 üü üüü üüü üü üü
S350 or S450 Galv. (Z275)HD (ZM310) 1.2 13.33 119.8 33.7 1633 2.6 - 3.1 3.7 - 4.2 0.45 8.0 üü üüü üüü üü üü
122
600 Cover Width
300
8012
TR80S350 or S450 Galv. (Z275)
HD (ZM310) 0.9 11.33 172.9 42.3 1385(slab
depth/ 1000)
- 0.044Yes
3.4 - 3.8 3.7 - 4.2 0.45 11.0 üüü üü ü ü ü
S350 or S450 Galv. (Z275)HD (ZM310) 1.0 12.54 192.3 42.4 1539 3.6 - 4.1 4.0 - 4.5 0.45 10.5 üüü üü ü ü ü
S350 or S450 Galv. (Z275)HD (ZM310) 1.2 15.06 231.1 42.5 1860 3.9 - 4.3 4.5 - 5.1 0.45 9.5 üüü üü ü ü ü
Roof Profiles Sectional Detail Steel Grade N/mm2
Available Coatings
Nominal Thickness
mmWeightkg/m2
WeightkN/m2
Top Flange in Compression
Bottom Flange in Compression
Max. Recommended Sheet Length
++
Span Cost Speed Aesthetics LoadMoment Capacity
Moment of Inertia
Moment Capacity
Moment of Inertia
Max. Single span m**
Max. Double span m**
Max. Cantilever m***
S350 Galv. (Z275)White Liner (25μm) 0.7 6.66 0.07 1.45 6.2 1.54 9.5 1.49 1.77 0.30 12.0 ü üüü üüü üüü ü
S350 Galv. (Z275)White Liner (25μm) 0.9 8.57 0.09 2.19 8.8 2.18 13.2 1.68 1.99 0.35 10.0 ü üüü üüü üüü ü
900 Cover width
150
43
35
70
+
S350 Galv. (Z275)White Liner (25μm) 0.7 7.58 0.08 3.42 20.10 2.95 19.70 2.21 2.62 0.40 12.0 ü üüü üüü üüü ü
S350 Galv. (Z275)White Liner (25μm) 0.9 9.76 0.10 4.26 23.52 4.16 22.39 2.32 2.75 0.45 10.0 ü üüü üüü üüü ü
S350 Galv. (Z275)White Liner (25μm) 1.2 13.03 0.13 7.5 35.7 6.6 35.7 2.67 3.17 0.55 8.0 ü üüü üüü üüü ü
850 Cover width
213
63
60
100
+
S350 Galv. (Z275)White Liner (25μm) 0.7 8.02 0.08 4.15 58.20 4.93 52.2 3.15 3.74 0.70 12.0 üü üüü üüü üüü üü
S350 Galv. (Z275)White Liner (25μm) 0.9 10.33 0.10 5.61 68.75 7.4 60.98 3.28 3.88 0.80 10.0 üü üüü üüü üüü üü
S350 Galv. (Z275)White Liner (25μm) 1.2 13.8 0.14 11.01 107.30 10.97 106.80 3.86 4.58 0.95 8.0 üü üüü üüü üüü üü
720 Cover width
240
70
100
100
S350 Galv. (Z275)White Liner (25μm) 0.7 9.47 0.09 7.46 179.06 8.41 154.04 4.50 4.58 1.00 12.0 üü üü üü üü üü
S350 Galv. (Z275)White Liner (25μm) 0.9 12.2 0.12 11.62 211.30 10.74 196.21 4.85 5.70 1.13 9.0 üü üü üü üü üü
S350 Galv. (Z275)White Liner (25μm) 1.2 16.29 0.16 21.77 349.87 17.73 351.59 5.73 6.80 1.25 7.5 üü üü üü üü üü
930 Cover width
310
43267
137
143 167
+
S320 Galv. (Z275)White Liner (25μm) 0.75 9.71 0.10 9.66 271.13 8.17 262.59 5.30 5.25 1.15 10.0 üü üü üü üü üü
S320 Galv. (Z275)White Liner (25μm) 1.0 13 0.13 14.80 367.55 14.69 367.55 5.80 6.50 1.28 8.0 üü üü üü üü üü
S320 Galv. (Z275)White Liner (25μm) 1.25 16.2 0.16 20.60 463.08 20.75 463.10 6.30 7.75 1.40 6.5 üü üü üü üü üü
840 Cover width
280
41239
153
119 161
+
S320 Galv. (Z275)White Liner (25μm) 0.75 10.75 0.11 12.10 375.10 10.62 375.10 5.75 6.30 1.30 10.0 üüü ü üü üü üüü
S320 Galv. (Z275)White Liner (25μm) 1.0 14.33 0.14 23.00 507.00 18.30 507.00 6.50 7.75 1.38 8.0 üüü ü üü üü üüü
S320 Galv. (Z275)White Liner (25μm) 1.25 17.9 0.18 29.40 638.70 25.78 638.70 7.00 9.00 1.45 6.5 üüü ü üü üü üüü
750 Cover width
250
41209
158
119 131
+
S320 Galv. (Z275)White Liner (25μm) 0.75 12.04 0.12 13.20 446.00 12.83 446.00 6.25 6.75 1.25 10.0 üüü ü ü üü üüü
S320 Galv. (Z275)White Liner (25μm) 1.0 16.05 0.16 22.10 597.60 20.56 597.60 6.90 8.25 1.40 8.0 üüü ü ü üü üüü
S320 Galv. (Z275)White Liner (25μm) 1.25 20.00 0.20 27.80 759.30 27.00 759.30 7.45 9.00 1.55 6.5 üüü ü ü üü üüü
750 Cover width
375
73302
205
205 170
+
S320 Galv. (Z275)White Liner (25μm) 0.75 12.04 0.12 17.41 692.60 17.70 786.69 5.25 5.50 1.45 10.0 üüü ü ü üü üüü
S320 Galv. (Z275)White Liner (25μm) 1.0 16.05 0.16 26.70 984.00 26.85 1096.0 8.00 9.25 1.65 8.0 üüü ü ü üü üüü
S320 Galv. (Z275)White Liner (25μm) 1.25 19.63 0.20 35.73 1271.00 34.73 1385.0 8.75 10.75 1.85 6.5 üüü ü ü üü üüü
1000 Cover width
200
28
30
122
+
™
Product Selector
SMDStructural Floor and Roof Solutions
UK Tel: +44 (0) 1202 718898 UK Email: [email protected]
UK Head OfficeThe Outlook Ling Road Tower Park Poole Dorset BH12 4PY UK
UK Midlands Logistics Centre Units 1+2 Nunn Brook Rise County Estate Huthwaite Nottinghamshire NG17 2PD
UK Scottish Logistics Centre 12 Palacecraig Street Coatbridge North Lanarkshire ML5 4RY
International Offices United Arab Emirates – Dubai Email: [email protected] – Mumbai Email: [email protected]
www.smdltd.co.uk
Contact us today for a competitive quotationFor all your Technical guidance and requirements, please contact [email protected] or call 01202 718898, where our team will be happy to advise you.
• Fall Arrest Safety Systems – Safety Netting and Airbags
• Supply Only / Supply and Fix of Steel Floor Deck & Edge Shuttering
• Supply Only / Supply and Fix of Shear Studs (On site or Factory Fitted)
• Supply Only / Supply and Fix of Steel Roof Deck
• Ground and Upper Floor Concrete Slabs
Services we provide
© SMD is a trading name of Structural Metal Decks Limited. Copyright 2016. Liable to change without notice.