Large internal diameterReduces flow resistance

Soft and kink-resistant tubing150cm length

Sliding clampAssists withtaking samples

Needle-lesssampling portWith smooth surfaceto clean before use

SteppedConnectorwith protective cap

Large, heavy-dutyDrainage bag(2000ml)

Germ Guard tapPrevents drain tube fromdirect contact with the floor

Accuratemeasurements(1mm) for lowurinary output

Safety rotational tapHelps to prevent contamination

Strong, heavy-dutyRigid holder- 500ml capacity- (590ml overflow)

Extra chamberPrevents urine reflux

Anti-kink resistor

Strong hanger

sinapi urine meter

Urine Meter with 500ml holder, large bag and easy-to-use rotational tap

CAUTION: Federal law restricts this device to sale by or on the order of a physician.

www.sinapi.co.za

ADVANTAGES

IMPROVE INFECTION CONTROL

- Safe Rotational Tap

- Germ Guard Tap

- Extra chamber prevents urine reflux

- Large diameter connector tube improves

drainage efficiency

- Needle-less

EASE-OF-USE

- Large rigid holder (590ml) for Polyuria

- Accurate measurements (1ml) for Oliguria

- Soft tubing that can be manipulated

- Slide-clamp assists with taking sample

from sampling port

FEATURES

ROTATIONAL TAP

- Operated with one hand.

- Easy rotation ensures fingers stay far away

from outlet to prevent contamination.

- Protects patient and operator.

CLOSED OPEN CLOSED OPEN

CONNECTOR

- Large internal diameter to ensure good flow & prevent blood clots

from getting blocked at this point.

- High quality barb fitting to prevent potential dislodgement of

the urine catheter.

- The needle-less sampling port has a large, smooth surface to swab

before taking a sample.

INSTRUCTIONS FOR USE

1. Hang meter: Use the hooks to hang on the bed frame.

2. Drain meter: FIG (1) Rotate the tap at bottom of the meter anti-clockwise. To close, rotate the tap clockwise.

3. Empty meter into bag: FIG (2) Hold the bottom of the meter and gently tilt the meter into horizontal position.

4. Drain bag: FIG (3) - use tap at bottom of the bag. Pinch the finger tabs of the tap.

To open, the white tab must rotate anti-clockwise. To close, the white tab must rotate clockwise.

5. Sampling urine: FIG (4) A needle-less sampling port is available on the catheter connector.

Swab the port surface with anti-septic. Insert needle-less syringe tip into the port. Obtain sample

and remove the syringe. CAUTION: Conventional needles and blunt cannulas are not recommended.

FIG (4)

GERM GUARD TAP

- Prevents tube from contact with the floor.

- Levers are far away from the outlet to

prevent contamination.