Crude Oil Blending with SABSE Tank Mixers.
Asphalt/Bitumen Heat Transfer with BSE Tank Mixer.
Crude Oil Blending with SABSE Tank Mixers.
Fuel Oil Blending with FABSE Tank Mixer.
Need image here
Biodiesel Blending with FABSE Tank Mixer.
The PMSL Edge Over 100 Years of Process and Mechanical Reliability
UK
99G
120
246
© P
hila
delp
hia
Mix
ing
Sol
utio
ns, L
td.,
2012
.
Excellence by tradition, optimization by design.
PEOPLE
PROCESS
PRODUCTS
PERFORMANCE
Petroleum, Refinery, Transportation,and Storage Terminals
SIDE ENTRYMIXING TECHNOLOGY
Philadelphia Mixing Solutions, Ltd., PMSL nnn www.philamixers.com Philadelphia Mixing Solutions, Ltd., PMSL nnn www.philamixers.com
72
EXPERIENCE
LAB
RISK AVOIDANCE
ComputerModelingCFD
LaboratoryTesting
Over 60 Years
Reduce RiskOf Poor
Performance
THREE POINT SUCCESS TRIANGLEAbsolutely With PMSL
Crude Oil Blending Asphalt/Bitumen Heat Transfer
API 653 Tank Inspection, Repair, Alteration, and Reconstruction - January 1991Because “Leaks in the tank bottoms are not acceptable.” (API 653 4.4.1) •Provenpredictableflowpatterns •Extensive use of computational fluid dynamic analysis guarantees performance •Enhanced Tank Farm operations
EEMUA Pub. 159:1994 User’s Guide to the Inspection, Maintenance and Repair Aboveground Vertical Cylindrical Steel Storage Tanks
Corrosion is a prime cause of deterioration of steel storage tank and accessories.Locating and Evaluating the extent of corrosion is therefore a major reason for inspection. (EEMUA Pub. 159 4.1) •Preventcorrosiveproductsfromsettlingoutbyeffectivemixing (taken from “Lessons to be Learned” Kallo Tank Failure)
Product Blending for Fuel Quality
Effective Mixing
1. Basic Sediment& Water(BS&W) PreventionProvide a focused flow across the tank floor such that the complete floor is “swept” and sedimentation and water is homogenized in the crude oil. By effectively sweeping the floor it will allow for better “water draw” of free water prior to mixing.
2. BlendingMix two or more components to obtain a homogeneous blend in a specific amount of time to defined requirements demands complete bottom-to-top-to-bottom turnover.
3. HomogeneityMaintain homogeneity of refinery finished, intermediate products, or chemical plant feed stocks to ensure uniform specification. This demands completed movement throughout the tank with bottom-to-top-to-bottom turnover, as well as circulation around the tank. This ensures that the media at the bottom, middle, and top is uniform.
4. Temperature UniformityAid heat transfer while heating or cooling or to maintain temperature uniformity complete fluid motion where bottom-to-top-to-bottom turnover would normally be required. Positioning of the mixers relative to the heating elements is also important to obtain the desired process results.
5. Crude Oil/Optimization Enhancement/UpgradingThis could be enhancement/optimization/upgrading of different crude oils to achieve a certain specification of Sulphur Content, Density, or Viscosity to satisfy a certain refining recipe.
How Does It Work?Standard Mixer Propellers generate wide flow patterns (high shear/slip “Zonal Agitation”) that lack penetration power(thrust). The standard propellers also lack performance energy for solids suspension. “Zonal Mixing” is the only result these types of propellers can hope to achieve.
PMSL’s Lancer™ Advanced Pitch Prop produces exceptional penetrating power (focused flow) able to easily reach the far vessel wall while minimizing the widening of the flow pattern (shear). This optimized focus characteristic will achieve efficient and effective mixing through adequate power requirements, correct propeller selection, and mixers positioned as recommended.
Superior line of mixers designed specifically for tank storage.
Fluid MotionFluid Motion is key to the successful Basic Sediment & Water(BS&W) Prevention, Blending, homogenization, Temperature Uniformity and Crude Oil optimization - enhancement -upgrading in storage tank applications. The key to fluid motion is the correct propeller. Lancer Props utilize the latest in technology fluid dynamic advancements to produce its high efficiency propeller. This technology and superior design produces a jet stream unmatched in it’s application.
Call Your Mixing Expert
Why you should talk to PMSL about your tank mixing needs because...
Philadelphia Mixing Solutions, Ltd., PMSL nnn www.philamixers.com Philadelphia Mixing Solutions, Ltd., PMSL nnn www.philamixers.com
36
Lancer™ Advanced Pitch PropBenefits over the Competition
Cutlass™ Side-Entry MixersThe key to safe, clean and reliable tank farm mixing operations.
An Unparalleled and Unequalled Mixing Technology The PMSL Edge
Featured Benefits:•UnequaledFlow,greaterthaneventheLancer™ Prop (same Ø propeller)•EnhancedEntrainmentproduces greater mass flow•HigherVelocitiesmeans smaller propellers•LowerPowerConsumption reducing Plant operating costs (same speed)•MaximumReturnon Investment (ROI) of any propeller available
Comparison Flow Chart using blade cross sections @ 75% radius and CFD
Jensen Plenty Mixing Solutions Limited
29” Ø propeller40hp
425 rpm
30” Ø propeller40hp
425 rpm
26” Ø propeller25hp
425 rpm
Using patented propeller technology called “circular rake” (CR) which has been proven via CFD comparisons, particle image velocimetry (PIV) measurements of scale models.
BSE Swivel-Angle Mixers for crude oil tanksDesign, Reliability & Maintenance:•Electric Motor driven - ExN, Exd, Exe, ATEX approved; TEFC, Explosion Proof, IEEE-841 UL & CSA approved options.•ToothBeltTransmission,GatesGT3andGoodyearEaglePDenclosedinaweatherproofguard-ATEXandOSHAapproved.•Sleevemountedbearingsfacilitatequickertankshut-offengagement.•BearingsDeepGrooveBall“greasesealedforlife”ISO/B10rated at 60,000 hours. •Tankshut-offwithSafetyValvefor“proofing”positivelockingoftapers.•MechanicalSealincludescomponentcartridge,single/double&tandem.•Thepropellerisdesignedtocreate“focusedflow,”allowing effective penetration across the tank.•TheSwivel-Angleassembly(+/-30degreesweeping)withBall Seal designed for zero leaks.•Mixer-to-tankmountingsincludeallAPI650,DINstandardsand “custom options.”•Capableofbeingfittedwithstandard“manualadjustments” or “automatic actuation.”
GSE Swivel-Angle Mixersfor crude oil tanksDesign, Reliability & Maintenance:•Electric Motor driven - ExN, Exd, Exe, ATEX approved; TEFC, Explosion Proof, IEEE-841 UL & CSA approved options.•GearReducerdoesnothavetoberemovedtoservicethemechanicalseal.•BearingsdesignedforISO/B10ratedat100,000hours.•Tankshut-offwithSafetyValvefor“proofing”positivelockingoftapers.•MechanicalSealincludescomponentcartridge,single/double&tandem.•Thepropellerisdesignedtocreate“focusedflow,”allowing effective penetration across the tank.•TheSwivel-Angleassembly(+/-30degreesweeping) with Ball Seal designed for zero leaks.•Mixer-to-tankmountingsincludeallAPI650,DINstandards and “custom options.”•Capableofbeingfittedwithstandard“manualadjustments” or “automatic actuation.”
Philadelphia Mixing Solutions, Ltd., PMSL nnn www.philamixers.com Philadelphia Mixing Solutions, Ltd., PMSL nnn www.philamixers.com
4 5
The PMSL Edge The PMSL Edge
BSE Fixed-Angle Mixers for product tanksDesign, Reliability & Maintenance:Includes recently upgrated features:• ElectricMotordrivenATEXapproved.• ToothBelttransmission,GatesGT3andGoodyearEaglePDenclosedinaweatherproofguard-ATEXandOSHAapproved.• Sleevemountedbearingsfacilitatequickertankshut-offengagement.• BearingsDeepGrooveBall“greasesealedforlife” ISO/B10 rated at 60,000 hours. • Tankshut-offwithSafetyValvefor“proofing”positivelockingoftapers.• MechanicalSealincludescomponent,cartridge single/double & tandem. • Thepropellerisdesignedtocreate“focusedflow” allowing effective penetration across the tank. • Thefixed-Angleassembly(+/30degreesweeping) with Ball Seal designed for zero leaks.• Mixer-to-tankmountingsincludesallAPI650,DINStandards and “custom options.”
Cutlass™ Side-Entry MixersThe key to safe, clean and reliable tank farm mixing operations.
GSE Fixed-Angle Mixers for product tanksDesign, Reliability & Maintenance:•Electricmotordriven-ExN,Exd,Exe,ATEXapproved; TEFC , Explosion Proof, IEEE-841 UL & CSA approved options.• GearReducerdoesnothavetoberemovedtoservice the mechanical seal. • BearingsdesignedforISO/B10ratedat100,000hours.• Tankshut-offwithSafetyValvefor“proofing”positive locking of tapers. • MechanicalSealincludescomponent,cartridge single/double & tandem. • Thepropellerisdesignedtocreate“focusedflow” allowing effective penetration across the tank. • Mixer-to-tankmountingsincludesallAPI650,DIN Standards and “custom options.”
Mechanical Seal and Tank Shut-offWith today’s regulations and end user demands of “no oil on the ground” the mechanical seal and tank shut-off mechanical seal and tank shut-off mechanism must be of the highest quality. DesignedintoeveryBSE&GSEtankmixerisataper-to-taperstainless steel tank shut-off. Every mechanism has a proving safety valve for 100% proof that the tank contents are sealed from the atmosphere and provide 100% security to the mechanics.•Bearingsandmechanicalsealstobechanged out with 100% confidence•Zeroleakduetocorrosionresistanttaperfaces
Sleeve Mounted Bearing AssembliesSleeve Mounted Bearing Assemblies facilitate quicker tank shut-off engagement as described in PIP RESM 002 4.1.3. Using all deep grooved ball bearings rated at B10/ISO 60,000 hours minimum, bearings are grease sealed series 6000
Transmission-BSETwo drive belt options are offered•GoodyearEaglePd•GatesGT3-Anti-staticATEXapprovedBoth types of belt are widely accepted and used in the oil industry. Enclosed in a spark proof, weatherproof guard that is ATEX and OSHAapproved.
Transmission-GSEGearboxdesignedtoAGMAstandardsandwithbearingsexceeding B10/ISO 100,000 hour life. The key feature here is the drive sleeve removal such that the mechanical seal can be removed through the arrubus between shaft and gearbox.•Gearboxdoesnothavetoberemovedformechanical seal repair. No cranes, no lifting, speedy repairs.
Swivel AssemblyTheswivelassemblyfacilitatesthepropellertobemoved+/-30degrees thus allowing the complete tank floor to be swept by the focus flow generated by the propeller. The design of the swivel assembly is such that the swivel pins are an interference fit in the mounting cover and bushes are included in the swivel component. The assembly comes with a zero leak swivel ball seal and can be fitted with secondary containment boot.