Weights & Couples DataCompany: A G Equipment Company Customer: YPFB Transporte S.A.Quote: 7400 Inquiry: Parvez Zahir-AGE

7.7.2.2 Case 1: DESIGN POINT CONDITIONS Project: Sica Station

Frame: JGD/2 Unit Weight: 14138.00 lbs Max Recip Weight (lbs)Stroke,in: 5.50 Rated Speed of 1200.0 RPM: 830.30ConRod Center Dist, in: 17.00 Applied Speed of 1200.0 RPM: 830.30

Install Weights:Bore C-Rod Piston X-Head X-Head Bal Nut Bal Nut Recip Imb

Throw Cyl Model in lbs + Rod Part # lbs Part # lbs Weight 2.51 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.002 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.00 0.0

LEGEND:Imb - Opposing Throws are NOT BalancedRecip Weight - Can't exceed max recip weight @ rated speed.X-Head and Nut Part Legend:

A - Part is from Available Parts ListNS - Non-Standard PartSP - Non-Standard Part: Guide (JG:A) or crankshaft (M:N:P:Q) must be removed to install.S - Standard PartB is in front of any above if Balancing X-HeadLegend - Manual Part Selection

UNBALANCED FORCES & COUPLES

Operating RPM: 1200

Horizontal Primary Secondary--------------------------------------------------- ---------------- ---------------

Force, KIP at Max Imb: 2.50 lbs 0.281 0.045

Force, KIP (actual weights) 0.000 0.000Couple, KIP-ft 11.615 5.530

Vertical Primary--------------------------------------------------- ----------------

Force, KIP 0.000Couple, KIP-ft 22.573

(Forces/Couples are Zero(0) to Peak)

CROSSHEAD GUIDE DEFLECTIONGuide Cyl Wt Pkt Wt Other Wt Total Wt Deflection

Throw Type lbs lbs lbs lbs in--------- --------- ------------- ------------- ------------- ------------- -----------------1 STD 2900.00 219.00 0.00 3119.00 0.0112 STD 2900.00 219.00 0.00 3119.00 0.011IMPORTANT NOTE: Crosshead top and bottom clearance and Piston Rod Run-out should be measured after shimming.

01/19/2015 08:52:56 Note: BOLD=Out of Limits, ITALIC=Special Appl, BOLD=Review Base: 14.70 psia, 60.0 F Page: 1 of 9File: \\AGSHARE\Main\DR\2013\13227-30 YPFB\Vendors\Ariel\AG13227.run Gathering Case:1 - Pkg:1

Weights & Couples DataCompany: A G Equipment Company Customer: YPFB Transporte S.A.Quote: 7400 Inquiry: Parvez Zahir-AGE

7.7.2.2 Case 2:DESIGN OPERATING RANGE 550/40F

Project: Sica Station

Frame: JGD/2 Unit Weight: 14138.00 lbs Max Recip Weight (lbs)Stroke,in: 5.50 Rated Speed of 1200.0 RPM: 830.30ConRod Center Dist, in: 17.00 Applied Speed of 1200.0 RPM: 830.30

Install Weights:Bore C-Rod Piston X-Head X-Head Bal Nut Bal Nut Recip Imb

Throw Cyl Model in lbs + Rod Part # lbs Part # lbs Weight 2.51 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.002 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.00 0.0

LEGEND:Imb - Opposing Throws are NOT BalancedRecip Weight - Can't exceed max recip weight @ rated speed.X-Head and Nut Part Legend:

A - Part is from Available Parts ListNS - Non-Standard PartSP - Non-Standard Part: Guide (JG:A) or crankshaft (M:N:P:Q) must be removed to install.S - Standard PartB is in front of any above if Balancing X-HeadLegend - Manual Part Selection

UNBALANCED FORCES & COUPLES

Operating RPM: 1200

Horizontal Primary Secondary--------------------------------------------------- ---------------- ---------------

Force, KIP at Max Imb: 2.50 lbs 0.281 0.045

Force, KIP (actual weights) 0.000 0.000Couple, KIP-ft 11.615 5.530

Vertical Primary--------------------------------------------------- ----------------

Force, KIP 0.000Couple, KIP-ft 22.573

(Forces/Couples are Zero(0) to Peak)

CROSSHEAD GUIDE DEFLECTIONGuide Cyl Wt Pkt Wt Other Wt Total Wt Deflection

Throw Type lbs lbs lbs lbs in--------- --------- ------------- ------------- ------------- ------------- -----------------1 STD 2900.00 219.00 0.00 3119.00 0.0112 STD 2900.00 219.00 0.00 3119.00 0.011IMPORTANT NOTE: Crosshead top and bottom clearance and Piston Rod Run-out should be measured after shimming.

01/19/2015 08:52:56 Note: BOLD=Out of Limits, ITALIC=Special Appl, BOLD=Review Base: 14.70 psia, 60.0 F Page: 2 of 9File: \\AGSHARE\Main\DR\2013\13227-30 YPFB\Vendors\Ariel\AG13227.run Gathering Case:2 - Pkg:1

Weights & Couples DataCompany: A G Equipment Company Customer: YPFB Transporte S.A.Quote: 7400 Inquiry: Parvez Zahir-AGE

7.7.2.2 Case 3:DESIGN OPERATING RANGE 550/90F

Project: Sica Station

Frame: JGD/2 Unit Weight: 14138.00 lbs Max Recip Weight (lbs)Stroke,in: 5.50 Rated Speed of 1200.0 RPM: 830.30ConRod Center Dist, in: 17.00 Applied Speed of 1200.0 RPM: 830.30

Install Weights:Bore C-Rod Piston X-Head X-Head Bal Nut Bal Nut Recip Imb

Throw Cyl Model in lbs + Rod Part # lbs Part # lbs Weight 2.51 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.002 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.00 0.0

LEGEND:Imb - Opposing Throws are NOT BalancedRecip Weight - Can't exceed max recip weight @ rated speed.X-Head and Nut Part Legend:

A - Part is from Available Parts ListNS - Non-Standard PartSP - Non-Standard Part: Guide (JG:A) or crankshaft (M:N:P:Q) must be removed to install.S - Standard PartB is in front of any above if Balancing X-HeadLegend - Manual Part Selection

UNBALANCED FORCES & COUPLES

Operating RPM: 1200

Horizontal Primary Secondary--------------------------------------------------- ---------------- ---------------

Force, KIP at Max Imb: 2.50 lbs 0.281 0.045

Force, KIP (actual weights) 0.000 0.000Couple, KIP-ft 11.615 5.530

Vertical Primary--------------------------------------------------- ----------------

Force, KIP 0.000Couple, KIP-ft 22.573

(Forces/Couples are Zero(0) to Peak)

CROSSHEAD GUIDE DEFLECTIONGuide Cyl Wt Pkt Wt Other Wt Total Wt Deflection

Throw Type lbs lbs lbs lbs in--------- --------- ------------- ------------- ------------- ------------- -----------------1 STD 2900.00 219.00 0.00 3119.00 0.0112 STD 2900.00 219.00 0.00 3119.00 0.011IMPORTANT NOTE: Crosshead top and bottom clearance and Piston Rod Run-out should be measured after shimming.

01/19/2015 08:52:56 Note: BOLD=Out of Limits, ITALIC=Special Appl, BOLD=Review Base: 14.70 psia, 60.0 F Page: 3 of 9File: \\AGSHARE\Main\DR\2013\13227-30 YPFB\Vendors\Ariel\AG13227.run Gathering Case:3 - Pkg:1

Weights & Couples DataCompany: A G Equipment Company Customer: YPFB Transporte S.A.Quote: 7400 Inquiry: Parvez Zahir-AGE

7.7.2.2 Case 4:DESIGN OPERATING RANGE 700/40F

Project: Sica Station

Frame: JGD/2 Unit Weight: 14138.00 lbs Max Recip Weight (lbs)Stroke,in: 5.50 Rated Speed of 1200.0 RPM: 830.30ConRod Center Dist, in: 17.00 Applied Speed of 1200.0 RPM: 830.30

Install Weights:Bore C-Rod Piston X-Head X-Head Bal Nut Bal Nut Recip Imb

Throw Cyl Model in lbs + Rod Part # lbs Part # lbs Weight 2.51 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.002 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.00 0.0

LEGEND:Imb - Opposing Throws are NOT BalancedRecip Weight - Can't exceed max recip weight @ rated speed.X-Head and Nut Part Legend:

A - Part is from Available Parts ListNS - Non-Standard PartSP - Non-Standard Part: Guide (JG:A) or crankshaft (M:N:P:Q) must be removed to install.S - Standard PartB is in front of any above if Balancing X-HeadLegend - Manual Part Selection

UNBALANCED FORCES & COUPLES

Operating RPM: 1200

Horizontal Primary Secondary--------------------------------------------------- ---------------- ---------------

Force, KIP at Max Imb: 2.50 lbs 0.281 0.045

Force, KIP (actual weights) 0.000 0.000Couple, KIP-ft 11.615 5.530

Vertical Primary--------------------------------------------------- ----------------

Force, KIP 0.000Couple, KIP-ft 22.573

(Forces/Couples are Zero(0) to Peak)

CROSSHEAD GUIDE DEFLECTIONGuide Cyl Wt Pkt Wt Other Wt Total Wt Deflection

Throw Type lbs lbs lbs lbs in--------- --------- ------------- ------------- ------------- ------------- -----------------1 STD 2900.00 219.00 0.00 3119.00 0.0112 STD 2900.00 219.00 0.00 3119.00 0.011IMPORTANT NOTE: Crosshead top and bottom clearance and Piston Rod Run-out should be measured after shimming.

01/19/2015 08:52:56 Note: BOLD=Out of Limits, ITALIC=Special Appl, BOLD=Review Base: 14.70 psia, 60.0 F Page: 4 of 9File: \\AGSHARE\Main\DR\2013\13227-30 YPFB\Vendors\Ariel\AG13227.run Gathering Case:4 - Pkg:1

Weights & Couples DataCompany: A G Equipment Company Customer: YPFB Transporte S.A.Quote: 7400 Inquiry: Parvez Zahir-AGE

7.7.2.2 Case 5:DESIGN OPERATING RANGE 700/90F

Project: Sica Station

Frame: JGD/2 Unit Weight: 14138.00 lbs Max Recip Weight (lbs)Stroke,in: 5.50 Rated Speed of 1200.0 RPM: 830.30ConRod Center Dist, in: 17.00 Applied Speed of 1200.0 RPM: 830.30

Install Weights:Bore C-Rod Piston X-Head X-Head Bal Nut Bal Nut Recip Imb

Throw Cyl Model in lbs + Rod Part # lbs Part # lbs Weight 2.51 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.002 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.00 0.0

LEGEND:Imb - Opposing Throws are NOT BalancedRecip Weight - Can't exceed max recip weight @ rated speed.X-Head and Nut Part Legend:

A - Part is from Available Parts ListNS - Non-Standard PartSP - Non-Standard Part: Guide (JG:A) or crankshaft (M:N:P:Q) must be removed to install.S - Standard PartB is in front of any above if Balancing X-HeadLegend - Manual Part Selection

UNBALANCED FORCES & COUPLES

Operating RPM: 1200

Horizontal Primary Secondary--------------------------------------------------- ---------------- ---------------

Force, KIP at Max Imb: 2.50 lbs 0.281 0.045

Force, KIP (actual weights) 0.000 0.000Couple, KIP-ft 11.615 5.530

Vertical Primary--------------------------------------------------- ----------------

Force, KIP 0.000Couple, KIP-ft 22.573

(Forces/Couples are Zero(0) to Peak)

CROSSHEAD GUIDE DEFLECTIONGuide Cyl Wt Pkt Wt Other Wt Total Wt Deflection

Throw Type lbs lbs lbs lbs in--------- --------- ------------- ------------- ------------- ------------- -----------------1 STD 2900.00 219.00 0.00 3119.00 0.0112 STD 2900.00 219.00 0.00 3119.00 0.011IMPORTANT NOTE: Crosshead top and bottom clearance and Piston Rod Run-out should be measured after shimming.

01/19/2015 08:52:56 Note: BOLD=Out of Limits, ITALIC=Special Appl, BOLD=Review Base: 14.70 psia, 60.0 F Page: 5 of 9File: \\AGSHARE\Main\DR\2013\13227-30 YPFB\Vendors\Ariel\AG13227.run Gathering Case:5 - Pkg:1

Weights & Couples DataCompany: A G Equipment Company Customer: YPFB Transporte S.A.Quote: 7400 Inquiry: Parvez Zahir-AGE

7.7.2.2 Case 6:DESIGN OPERATING RANGE 800/40F

Project: Sica Station

Frame: JGD/2 Unit Weight: 14138.00 lbs Max Recip Weight (lbs)Stroke,in: 5.50 Rated Speed of 1200.0 RPM: 830.30ConRod Center Dist, in: 17.00 Applied Speed of 1200.0 RPM: 830.30

Install Weights:Bore C-Rod Piston X-Head X-Head Bal Nut Bal Nut Recip Imb

Throw Cyl Model in lbs + Rod Part # lbs Part # lbs Weight 2.51 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.002 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.00 0.0

LEGEND:Imb - Opposing Throws are NOT BalancedRecip Weight - Can't exceed max recip weight @ rated speed.X-Head and Nut Part Legend:

A - Part is from Available Parts ListNS - Non-Standard PartSP - Non-Standard Part: Guide (JG:A) or crankshaft (M:N:P:Q) must be removed to install.S - Standard PartB is in front of any above if Balancing X-HeadLegend - Manual Part Selection

UNBALANCED FORCES & COUPLES

Operating RPM: 1200

Horizontal Primary Secondary--------------------------------------------------- ---------------- ---------------

Force, KIP at Max Imb: 2.50 lbs 0.281 0.045

Force, KIP (actual weights) 0.000 0.000Couple, KIP-ft 11.615 5.530

Vertical Primary--------------------------------------------------- ----------------

Force, KIP 0.000Couple, KIP-ft 22.573

(Forces/Couples are Zero(0) to Peak)

CROSSHEAD GUIDE DEFLECTIONGuide Cyl Wt Pkt Wt Other Wt Total Wt Deflection

Throw Type lbs lbs lbs lbs in--------- --------- ------------- ------------- ------------- ------------- -----------------1 STD 2900.00 219.00 0.00 3119.00 0.0112 STD 2900.00 219.00 0.00 3119.00 0.011IMPORTANT NOTE: Crosshead top and bottom clearance and Piston Rod Run-out should be measured after shimming.

01/19/2015 08:52:56 Note: BOLD=Out of Limits, ITALIC=Special Appl, BOLD=Review Base: 14.70 psia, 60.0 F Page: 6 of 9File: \\AGSHARE\Main\DR\2013\13227-30 YPFB\Vendors\Ariel\AG13227.run Gathering Case:6 - Pkg:1

Weights & Couples DataCompany: A G Equipment Company Customer: YPFB Transporte S.A.Quote: 7400 Inquiry: Parvez Zahir-AGE

7.7.2.2 Case 7:DESIGN OPERATING RANGE 800/90F

Project: Sica Station

Frame: JGD/2 Unit Weight: 14138.00 lbs Max Recip Weight (lbs)Stroke,in: 5.50 Rated Speed of 1200.0 RPM: 830.30ConRod Center Dist, in: 17.00 Applied Speed of 1200.0 RPM: 830.30

Install Weights:Bore C-Rod Piston X-Head X-Head Bal Nut Bal Nut Recip Imb

Throw Cyl Model in lbs + Rod Part # lbs Part # lbs Weight 2.51 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.002 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.00 0.0

LEGEND:Imb - Opposing Throws are NOT BalancedRecip Weight - Can't exceed max recip weight @ rated speed.X-Head and Nut Part Legend:

A - Part is from Available Parts ListNS - Non-Standard PartSP - Non-Standard Part: Guide (JG:A) or crankshaft (M:N:P:Q) must be removed to install.S - Standard PartB is in front of any above if Balancing X-HeadLegend - Manual Part Selection

UNBALANCED FORCES & COUPLES

Operating RPM: 1200

Horizontal Primary Secondary--------------------------------------------------- ---------------- ---------------

Force, KIP at Max Imb: 2.50 lbs 0.281 0.045

Force, KIP (actual weights) 0.000 0.000Couple, KIP-ft 11.615 5.530

Vertical Primary--------------------------------------------------- ----------------

Force, KIP 0.000Couple, KIP-ft 22.573

(Forces/Couples are Zero(0) to Peak)

CROSSHEAD GUIDE DEFLECTIONGuide Cyl Wt Pkt Wt Other Wt Total Wt Deflection

Throw Type lbs lbs lbs lbs in--------- --------- ------------- ------------- ------------- ------------- -----------------1 STD 2900.00 219.00 0.00 3119.00 0.0112 STD 2900.00 219.00 0.00 3119.00 0.011IMPORTANT NOTE: Crosshead top and bottom clearance and Piston Rod Run-out should be measured after shimming.

01/19/2015 08:52:56 Note: BOLD=Out of Limits, ITALIC=Special Appl, BOLD=Review Base: 14.70 psia, 60.0 F Page: 7 of 9File: \\AGSHARE\Main\DR\2013\13227-30 YPFB\Vendors\Ariel\AG13227.run Gathering Case:7 - Pkg:1

Weights & Couples DataCompany: A G Equipment Company Customer: YPFB Transporte S.A.Quote: 7400 Inquiry: Parvez Zahir-AGE

7.7.2.2 Case 8:DESIGN OPERATING RANGE 900/90F

Project: Sica Station

Frame: JGD/2 Unit Weight: 14138.00 lbs Max Recip Weight (lbs)Stroke,in: 5.50 Rated Speed of 1200.0 RPM: 830.30ConRod Center Dist, in: 17.00 Applied Speed of 800.0 RPM: 1868.17

Install Weights:Bore C-Rod Piston X-Head X-Head Bal Nut Bal Nut Recip Imb

Throw Cyl Model in lbs + Rod Part # lbs Part # lbs Weight 2.51 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.002 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.00 0.0

LEGEND:Imb - Opposing Throws are NOT BalancedRecip Weight - Can't exceed max recip weight @ rated speed.X-Head and Nut Part Legend:

A - Part is from Available Parts ListNS - Non-Standard PartSP - Non-Standard Part: Guide (JG:A) or crankshaft (M:N:P:Q) must be removed to install.S - Standard PartB is in front of any above if Balancing X-HeadLegend - Manual Part Selection

UNBALANCED FORCES & COUPLES

Operating RPM: 800

Horizontal Primary Secondary--------------------------------------------------- ---------------- ---------------

Force, KIP at Max Imb: 2.50 lbs 0.125 0.020

Force, KIP (actual weights) 0.000 0.000Couple, KIP-ft 5.162 2.458

Vertical Primary--------------------------------------------------- ----------------

Force, KIP 0.000Couple, KIP-ft 10.032

(Forces/Couples are Zero(0) to Peak)

CROSSHEAD GUIDE DEFLECTIONGuide Cyl Wt Pkt Wt Other Wt Total Wt Deflection

Throw Type lbs lbs lbs lbs in--------- --------- ------------- ------------- ------------- ------------- -----------------1 STD 2900.00 219.00 0.00 3119.00 0.0112 STD 2900.00 219.00 0.00 3119.00 0.011IMPORTANT NOTE: Crosshead top and bottom clearance and Piston Rod Run-out should be measured after shimming.

01/19/2015 08:52:56 Note: BOLD=Out of Limits, ITALIC=Special Appl, BOLD=Review Base: 14.70 psia, 60.0 F Page: 8 of 9File: \\AGSHARE\Main\DR\2013\13227-30 YPFB\Vendors\Ariel\AG13227.run Gathering Case:8 - Pkg:1

Weights & Couples DataCompany: A G Equipment Company Customer: YPFB Transporte S.A.Quote: 7400 Inquiry: Parvez Zahir-AGE

7.7.2.2 Case 9:DESIGN OPERATING RANGE 900/90F

Project: Sica Station

Frame: JGD/2 Unit Weight: 14138.00 lbs Max Recip Weight (lbs)Stroke,in: 5.50 Rated Speed of 1200.0 RPM: 830.30ConRod Center Dist, in: 17.00 Applied Speed of 800.0 RPM: 1868.17

Install Weights:Bore C-Rod Piston X-Head X-Head Bal Nut Bal Nut Recip Imb

Throw Cyl Model in lbs + Rod Part # lbs Part # lbs Weight 2.51 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.002 7-1/4D10 7.250 165.50 146.60 D-5802 144.70 S B-1438 19.20 S 476.00 0.0

LEGEND:Imb - Opposing Throws are NOT BalancedRecip Weight - Can't exceed max recip weight @ rated speed.X-Head and Nut Part Legend:

A - Part is from Available Parts ListNS - Non-Standard PartSP - Non-Standard Part: Guide (JG:A) or crankshaft (M:N:P:Q) must be removed to install.S - Standard PartB is in front of any above if Balancing X-HeadLegend - Manual Part Selection

UNBALANCED FORCES & COUPLES

Operating RPM: 800

Horizontal Primary Secondary--------------------------------------------------- ---------------- ---------------

Force, KIP at Max Imb: 2.50 lbs 0.125 0.020

Force, KIP (actual weights) 0.000 0.000Couple, KIP-ft 5.162 2.458

Vertical Primary--------------------------------------------------- ----------------

Force, KIP 0.000Couple, KIP-ft 10.032

(Forces/Couples are Zero(0) to Peak)

CROSSHEAD GUIDE DEFLECTIONGuide Cyl Wt Pkt Wt Other Wt Total Wt Deflection

Throw Type lbs lbs lbs lbs in--------- --------- ------------- ------------- ------------- ------------- -----------------1 STD 2900.00 219.00 0.00 3119.00 0.0112 STD 2900.00 219.00 0.00 3119.00 0.011IMPORTANT NOTE: Crosshead top and bottom clearance and Piston Rod Run-out should be measured after shimming.

01/19/2015 08:52:56 Note: BOLD=Out of Limits, ITALIC=Special Appl, BOLD=Review Base: 14.70 psia, 60.0 F Page: 9 of 9File: \\AGSHARE\Main\DR\2013\13227-30 YPFB\Vendors\Ariel\AG13227.run Gathering Case:9 - Pkg:1