MADE IN ITALY
CATALOGUE 2017
Shredders TS LINE
ts technology
Kobra 260 TS
Kobra 270 TS
Kobra 310 TS
Kobra 410 TS
Kobra 245 TS
Kobra 310 TS HD
22
Kobra 310 TS-AF
Kobra 430 TS
3
NO OVERHEATING
ON 24 HOUR CON TI NUOUS MOT
OR
To understand how advanced the technology in the KOBRA TS Line actually is, just take a look at the innovative systems they come equipped with:
Energy Smart® is the most advanced energy saving system around. When the machine has not been used for just 8 seconds, it goes into automatic power saving stand-by mode and can be restarted by simply inserting material into the machine to be shredded.When the machine has not been used for 4 hours, it automatically disconnects from power supply.
Automatic Reverse System comes on when too much material is inserted into the shredder and puts the machine into automatic reverse.
Continuous duty shredding 24 hours a day special motors can operate 24 hours a day non-stop without overheating, allowing for continuous shredding and maximum daily shredding load.
ts technology
Automatic disconnection from power supply
No longer any need to switch off the shredder before leaving the office.
Maximum power saving.
4
To understand how advanced the technology in the KOBRA TS Line actually is, just take a look at the innovative systems they come equipped with:
Energy Smart® is the most advanced energy saving system around. When the machine has not been used for just 8 seconds, it goes into automatic power saving stand-by mode and can be restarted by simply inserting material into the machine to be shredded.When the machine has not been used for 4 hours, it automatically disconnects from power supply.
Automatic Reverse System comes on when too much material is inserted into the shredder and puts the machine into automatic reverse.
Continuous duty shredding 24 hours a day special motors can operate 24 hours a day non-stop without overheating, allowing for continuous shredding and maximum daily shredding load.
Two separate sets of cutting knives Two entry openings and two sets of cutting knives for the separate
insertion and shredding of paper, Cds, DVDs and credit cards, separation of shredded material into two bins
(260, 270, 310, 410 TS series)
Automatic Feeder to shred single sheets of paper Just insert the documents to shred into the automatic feeder and it
will shred automatically each document and turn into its stand-by position when shredding is completed
(available for KOBRA 310 TS series)
5
metal chain driving system:power and reliability
The shredders in the KOBRA TS Line come with a sturdy steel gears and metal chain drive system which offers superior reliability and resistance to
wear in comparison with cheaper plastic chain drive systems.
The development of new blade edges for the carbon hardened cutting knives in the KOBRA TS Line which are unaffected by staples and metal clips, makes
it possible to achieve high shred loads with low power consumption.
66
KOBRA TS cross-cut and HS shredders can be fitted with a built-in automatic oiling system which eliminates the need for manual oiling of cutting knives.
Shredders can also be fitted with the SHRED GUARD - Metal Detection System which warns when large metal objects, which could cause a damage to the cutting knives, are accidentally inserted into the entry opening and stops the machine before they reach the cutting knives. An illuminated optical indicator warns the operator to remove these objects in order to protect the knives.
ts technology
SHRED GUARD
METAL DETECTION
7
The range of KOBRA TS shredders with Touch Screen Technology is the most technologically advanced on the market today.
KOBRA TS shredders come with an EPC – Electronic Power Control – system. By means of a series of illuminated optical indicators, the operator can control the shredding load, avoid jams and optimize shredding.
Illuminated optical indicators on the Touch Screen panel show the current status of the machine or Energy Smart® lights up when the machine is into power saving stand-by mode.
Functions are activated by simply touching the required command on the Touch Screen.
There is also a light to warn the operator when the cutting knives need to be oiled. In shredders with an automatic oiler, a light comes on when the oil container is empty.
EPC- Electronic Power ControlShows the shredding load required to optimise shredding without jams (270, 310, 410TS series)
Illuminated optical indicators Clearly show the current status of the machine
Touch Screen Technology All controls are activated by simply touching the panel. Keep your finger on the “Forward” control for 5 seconds and the machine will operate for 30 seconds when transparent material needs to be shredded.
A warning light comes on when the cutting knives need oiling (270, 310, 410TS series)
ts technology
88
9
9
www.elcoman.it
Kobra 245 TS
Cutting knives New design of carbon hardened cutting knives
allows 35% more efficiency in shredding capacity with low power consumption
Touch Screen Panel Just touch the controls to activate the machine
functions. Keep your finger on the “Forward” control for 5 seconds and the machine functions continuously
for 30 seconds when transparent material needs to be shredded
Automatic disconnection from the mains No longer any need to switch off the shredder
before leaving the office. Maximum power saving
Chain Drive SystemSturdy steel gears and metal chain drive system which offer
reliability and resistance to wear
Professional TOUCH SCREEN Shredder available in six shredding security levels. Carbon hardened cutting knives, unaffected by staples and metal clips. High precision design of cutting knives allows high shred loads with low power consumption. Motor thermal protection. 24 hour continuous duty motor: no duty cycle or timed cool down period. Shreds up to 29 sheets of paper at a time (A4 70gr). Bag full stop with light signal. KOBRA 245 TS shreds transparent material too: keep your finger for 5 seconds on the Forward control and the machine works continuously for 30 seconds. Extraordinary speed for the KOBRA 245 TS S4-SF Super Fast: shreds an A4 sheet in just over 1 second.
SUPER POTENTIAL POWER UNIT heavy duty chain drive with steel gearsCONTINUOUS DUTY SHREDDING 24 hours a day without duty-cycleENERGY SMART® power saving system: sleep mode after 8 seconds, automatic switch-off after 4 hours of non-operationTOUCH SCREEN machine functions activated just by touching the control panelSTART & STOP automatic start and stop through electronic eyesSAFETY STOP automatic stop at the door openingAUTOMATIC REVERSE automatic reverse in case of jamming
OPTIONALS DESCRIPTION AVAILABLE Automatic Oiler automatically lubricates cutting knives all cross cut models Shred Guard - Metal Detection System detects metal presence to prevent damages to cutting unit all models excluding SF
*Capacity may vary on power supply, paper quality and lubrication of cutting knives
Model Shred sizemm
Sheet capacity* A4 70gr A4 80gr
Security Level DIN 66399
Shreddable Material
Kobra 245 TS S4-SF 3,8 14/16 11/13 P-2 T-2 E-2
Kobra 245 TS S4 3,8 25/27 20/22 P-2 O-2 T-2 E-2
Kobra 245 TS S5 5,8 27/29 22/24 P-2 O-2 T-2 E-2
Kobra 245 TS C2 1,9 x 15 11/13 9/11 P-5 T-5 E-4 F-2
Kobra 245 TS C4 3,9 x 40 21/23 16/18 P-4 O-3 T-4 E-3 F-1
Kobra 245 TS HS 0,8 x 9,5 6/8 5/6 P-6 F-3
Kobra 245 TS HS-6 0,8 x 5 4/5 3/4 P-7 F-3
ThroaT
245 mmCabineT
40 lDimensions
40x36x61cmConTinuous
DuTy moTor
Kobra 245 TS
10
Kobra 260 TS
www.elcoman.it
Kobra 260 TS
OPTIONALS DESCRIPTION AVAILABLE Automatic Oiler automatically lubricates cutting knives cross cut models Shred Guard - Metal Detection System detects metal presence to prevent damages to cutting unit all models **CD / DVD Cutting Unit separate cutting unit for Option on HS and HS6 models. Security Level O-1 T-2 E-2 CDs, DVDs and Credit Cards Standard on S4, S5, C2, C4 models
*Capacity may vary on power supply, paper quality and lubrication of cutting knives
ENERGY SMART® Power saving system: the machine goes
into automatic power saving stand-by after it has not been used for just 8 seconds
and after 4 hours of not being used is switched off at the mains
Two separate sets of cutting knives Two entry openings and two sets of cutting knives for the separate insertion and shredding of paper,
CDs, DVDs, and credit cards and separation of shredded material into two bins
Professional TOUCH SCREEN Shredder available in six shredding security levels. Carbon hardened cutting knives, unaffected by staples and metal clips. High precision design of cutting knives allows high shred loads with low power consumption. Motor thermal protection. 24 hour continuous duty motor: no duty cycle or timed cool down period. Shreds up to 30 sheets of paper at a time (A4 70gr). Bag full stop with light signal. Two separate sets of cutting knives: one for paper and one for CDs, DVDs and credit cards. Two distinct integrated removable bins for separating shredded paper from plastic shreds. KOBRA 260 TS shreds transparent material too: keep your finger for 5 seconds on the Forward control and the machine works continuously for 30 seconds.
SUPER POTENTIAL POWER UNIT heavy duty chain drive with steel gearsCONTINUOUS DUTY SHREDDING 24 hours a day without duty-cycleENERGY SMART® power saving system: sleep mode after 8 seconds,automatic switch-off after 4 hours of non-operationTOUCH SCREEN machine functions activated just by touching the control panelSTART & STOP automatic start and stop through electronic eyesSAFETY STOP automatic stop at the door openingAUTOMATIC REVERSE automatic reverse in case of jamming
ThroaT
260 mmCabineT
60 lConTinuous
DuTy moTor
Dimensions
40x36x80cm
Model Shred sizemm
Sheet capacity* A4 70gr A4 80gr
Security Level DIN 66399
Shreddable Material
Kobra 260 TS S4 3,8 26/28 21/23 P-2 O-2 T-2 E-2
Kobra 260 TS S5 5,8 28/30 23/25 P-2 O-2 T-2 E-2
Kobra 260 TS C2 1,9 x 15 12/14 10/12 P-5 T-5 E-4 F-2 +
Kobra 260 TS C4 3,9 x 40 22/24 17/19 P-4 O-3 T-4 E-3 F-1
Kobra 260 TS HS 0,8 x 9,5 6/8 5/6 P-6 F-3 +
Kobra 260 TS HS-6 0,8 x 5 4/5 3/4 P-7 F-3 +
**
**
**
AUTOMATIC OILER - AO Integrated Automatic Oiler
(option on cross-cut models)
11
Kobra 270 TS
www.elcoman.it
Kobra 270 TS
Two separate sets of cutting knives Two entry openings and two sets of cutting knives for the separate insertion and shredding of paper,
CDs, DVDs, and credit cards and separation of shredded material into two bins
Professional TOUCH SCREEN Shredder available in six shredding security levels. Carbon hardened cutting knives, unaffected by staples and metal clips. High precision design of cutting knives allows high shred loads with low power consumption. Motor thermal protection. 24 hour continuous duty motor: no duty cycle or timed cool down period. Shreds up to 32 sheets of paper at a time (A4 70gr). Bag full stop with light signal. Two separate sets of cutting knives: one for paper and one for CDs, DVDs and credit cards. Two distinct integrated removable bins for separating shredded paper from plastic shreds. KOBRA 270 TS shreds tran-sparent material too: keep your finger for 5 seconds on the Forward control and the machine works continuously for 30 seconds.
SUPER POTENTIAL POWER UNIT heavy duty chain drive with steel gearsCONTINUOUS DUTY SHREDDING 24 hours a day without duty-cycleENERGY SMART® power saving system: sleep mode after 8 seconds,automatic switch-off after 4 hours of non-operationTOUCH SCREEN machine functions activated just by touching the control panelEPC - Electronic Power Control shows the shredding load required to optimise shredding without jamsSTART & STOP automatic start and stop through electronic eyesSAFETY STOP automatic stop at the door openingAUTOMATIC REVERSE automatic reverse in case of jamming
OPTIONALS DESCRIPTION AVAILABLE Automatic Oiler automatically lubricates cutting knives cross cut models Shred Guard - Metal Detection System detects metal presence to prevent damages to cutting unit all models **CD / DVD Cutting Unit separate cutting unit for Option on HS and HS6 models. Security Level O-1 T-2 E-2 CDs, DVDs and Credit Cards Standard on S4, S5, C2, C4 models
*Capacity may vary on power supply, paper quality and lubrication of cutting knives
ThroaT
270 mmCabineT
110 lConTinuous
DuTy moTor
Dimensions
53x43x88cm
Model Shred sizemm
Sheet capacity* A4 70gr A4 80gr
Security Level DIN 66399
Shreddable Material
Kobra 270 TS S4 3,8 27/29 22/24 P-2 O-2 T-2 E-2
Kobra 270 TS S5 5,8 30/32 24/26 P-2 O-2 T-2 E-2
Kobra 270 TS C2 1,9 x 15 12/14 10/12 P-5 T-5 E-4 F-2 +
Kobra 270 TS C4 3,9 x 40 23/25 18/20 P-4 O-3 T-4 E-3 F-1
Kobra 270 TS HS 0,8 x 9,5 8/10 7/8 P-6 F-3 +
Kobra 270 TS HS-6 0,8 x 5 4/5 3/4 P-7 F-3 +
**
**
**
ENERGY SMART® Power saving system: the machine goes
into automatic power saving stand-by after it has not been used for just 8 seconds
and after four 4 of not being used is switched off at the mains
Touch Screen Panel Just touch the controls to activate the machine
functions. Keep your finger on the “Forward” control for 5 seconds and the machine functions continuously
for 30 seconds when transparent material needs to be shredded
12
www.elcoman.it
Kobra 310 TS
Kobra 310 TS
Kobra 310 TS-AF
OPTIONALS DESCRIPTION AVAILABLE Automatic Oiler automatically lubricates cutting knives Option on models CC2 and CC4. Standard for HS and HS6 models Automatic Feeder automatically shreds up to 170 sheets (A4/70gr) all cross cut models Lockable Cover with High Security Key protects documents from unauthorized persons all models with Automatic Feeder Shred Guard - Metal Detection System detects metal presence to prevent damages to cutting unit all models (without AF) CD / DVD Cutting Unit separate cutting unit for Option on HS and HS6 models. Security Level O-1 T-2 E-2 CDs, DVDs and Credit Cards Standard on SS4, SS5, CC2, CC4 models
* With Automatic Feeder: height + cm 7 ** Capacity may vary on power supply, paper quality and lubrication of cutting knives
***Two separate sets of cutting knives
Two entry openings and two sets of cutting knives for the separate insertion and shredding of paper,
CDs, DVDs, and credit cards and separation of shredded material into two bins
Automatic Feeder - AFshreds up to 170 sheets, whilst the operator can shred paper in the main throat and CDs/DVDs/Credit Cards
through the dedicated CD Cutting Unit at the same time.Specially equipped with the patented Anti-Jamming system in case the operator feeds the machine with
crumpled or stapled paper
Professional TOUCH SCREEN Shredder available in six shredding security levels. Carbon hardened cutting knives, unaffected by staples and metal clips. High precision design of cutting knives allows high shred loads with low power consumption. Motor thermal protection. 24 hour continuous duty motors: no duty cycle or timed cool down period. Shreds up to 47 sheets of paper at a time (A4 70gr). Bag full stop with light signal. Two separate sets of cutting knives: one for paper and one for CDs, DVDs and credit cards. Two distinct integrated removable bins for separating shredded paper from plastic shreds. KOBRA 310 TS shreds tran-sparent material too: keep your finger for 5 seconds on the Forward control and the machine works continuously for 30 seconds.
SUPER POTENTIAL POWER UNIT heavy duty chain drive with steel gearsCONTINUOUS DUTY SHREDDING 24 hours a day without duty-cycleENERGY SMART® power saving system: sleep mode after 8 seconds, automatic switch-off after 4 hours of non-operationTOUCH SCREEN machine functions activated just by touching the control panelEPC - Electronic Power Control shows the shredding load required to optimise shredding without jamsSTART & STOP automatic start and stop through electronic eyesSAFETY STOP automatic stop at the door openingAUTOMATIC REVERSE automatic reverse in case of jamming
Model Shred sizemm
Sheet capacity** A4 70gr A4 80gr
Security Level DIN 66399
Shreddable Material
Kobra 310 TS SS4 3,8 37/39 31/33 P-2 O-2 T-2 E-2
Kobra 310 TS SS5 5,8 45/47 37/39 P-2 O-2 T-2 E-2
Kobra 310 TS CC2 1,9 x 15 17/19 14/16 P-5 T-5 E-4 F-2 +
Kobra 310 TS CC4 3,9 x 40 29/31 25/27 P-4 O-3 T-4 E-3 F-1
Kobra 310 TS HS 0,8 x 9,5 11/13 10/11 P-6 F-3 +
Kobra 310 TS HS-6 0,8 x 5 5/6 4/5 P-7 F-3 +
***
***
***
ThroaT
310 mmCabineT
135 lConTinuous
DuTy moTor
Dimensions*53x43x96cm
Easy to remove bagSlide out tracks make it easy to empty
the two waste collection bags
13
Kobra 310 TS HD
www.elcoman.it
Kobra 310 TS HD Heavy Duty
Automatic Oiler Automatically lubricates cutting knives Standard for all models
OPTIONALS DESCRIPTION AVAILABLE Shred Guard - Metal Detection System detects metal presence to prevent damages to cutting unit all models
*Capacity may vary on power supply, paper quality and lubrication of cutting knives
HEAVY DUTYShreds up to 56 sheets of paper at a time
in cross cut
ENERGY SMART® Power saving system: the machine goes
into automatic power saving stand-by after it has not been used for just 8 seconds
and after 4 hours of not being used is switched off at the mains
AUTOMATIC OILER - AO 135 Liter quality cabinet equipped with a dedicated
oil container holder(standard for all 310 TS HD models)
Professional TOUCH SCREEN Heavy Duty Shredder available in four different security levels. Carbon hardened cutting kni-ves, unaffected by staples and metal clips. High precision design of cutting knives allows high shred loads with low power consumption. Motor thermal protection. 24 hour continuous duty motor: no duty cycle or timed cool down period. Shreds up to 56 sheets of paper at a time (A4 70gr), CDs, DVDs, Credit Cards and USB pen sticks. Bag full stop with light signal. KOBRA 310 TS HD shreds transparent material too: keep your finger for 5 seconds on the Forward control and the machine works continuously for 30 seconds.
SUPER POTENTIAL POWER UNIT heavy duty chain drive with steel gearsCONTINUOUS DUTY SHREDDING 24 hours a day without duty-cycleENERGY SMART® power saving system: sleep mode after 8 seconds, automatic switch-off after 4 hours of non-operationTOUCH SCREEN machine functions activated just by touching the control panelEPC - Electronic Power Control shows the shredding load required to optimise shredding without jamsSTART & STOP automatic start and stop through electronic eyesSAFETY STOP automatic stop at the door openingAUTOMATIC REVERSE automatic reverse in case of jamming
Model Shred sizemm
Sheet capacity* A4 70gr A4 80gr
Security Level DIN 66399
Shreddable Material
Kobra 310 TS HD C2 1,9 x 15 30/32 27/29 P-5 O-4 T-5 E-4 F-2
Kobra 310 TS HD C4 3,9 x 40 54/56 48/50 P-4 O-3 T-4 E-3 F-1
Kobra 310 TS HD HS 0,8 x 9,5 20/22 18/20 P-6 O-5 T-6 E-5 F-3
Kobra 310 TS HD HS-6 1 x 5 12 10 P-7 F-3
ThroaT
310 mmCabineT
135 lConTinuous
DuTy moTor
Dimensions
53x43x96cm
14
Kobra 410 TS
www.elcoman.it
Kobra 410 TS
Touch Screen Panel Just touch the controls to activate the machine
functions. Keep your finger on the “Forward” control for 5 seconds and the machine functions continuously
for 30 seconds when transparent material needs to be shredded
Automatic Oiler - AO Sturdy and large volume 205 Liter steel cabinet equipped with a dedicated oil container holder
Option of two separate cutting knivesTwo entry openings and two sets of cutting knives are optional on every model for the separate insertion and
shredding of paper, CDs,DVDs, credit cards and Floppy disks and separation of shredded material
(Cross Cut for models S5,C2 and C4 , High Security cut of 1,5 x 2,5 mm for models HS and HS-6)
Automatic disconnection from the mains No longer any need to switch off the shredder
before leaving the office. Maximum power saving
Professional TOUCH SCREEN Heavy Duty Shredder available in five shredding security levels. Carbon hardened cutting knives, unaffected by staples and metal clips. High precision design of cutting knives allows high shred loads with low power consumption. Motor thermal protection. 24 hour continuous duty motor: no duty cycle or timed cool down period. Shreds up to 72 sheets of paper at a time (A4 70gr). Bag full stop with light signal. As optional it is available a second set of cutting knives dedicated to CDs, DVDs, credit cards and Floppy disks shredding. The CD/DVD cutting unit of models 410 TS HS and HS-6 shreds CDs and DVDs in high security level O-6 (DIN 66399). Two distinct integrated removable bins for separating shredded paper from plastic shreds. KOBRA 410 TS shreds transparent material too: keep your finger for 5 seconds on the Forward control and the machine works continuously for 30 seconds.
SUPER POTENTIAL POWER UNIT heavy duty chain drive with steel gearsCONTINUOUS DUTY SHREDDING 24 hours a day without duty-cycleENERGY SMART® power saving system: sleep mode after 8 seconds, automatic switch-off after 4 hours of non-operationTOUCH SCREEN machine functions activated just by touching the control panelEPC - Electronic Power Control shows the shredding load required to optimise shredding without jamsSTART & STOP automatic start and stop through electronic eyesSAFETY STOP automatic stop at the door openingAUTOMATIC REVERSE automatic reverse in case of jamming
Model Shred sizemm
Sheet capacity* A4 70gr A4 80gr
Security Level DIN 66399
Shreddable Material
Kobra 410 TS S5 5,8 68/72 60/64 P-2 O-2 T-2 E-2
Kobra 410 TS C2 1,9 x 15 30/32 27/29 P-5 O-4 T-5 E-4 F-2
Kobra 410 TS C4 3,9 x 40 54/56 48/50 P-4 O-3 T-4 E-3 F-1
Kobra 410 TS HS 0,8 x 9,5 20/22 18/20 P-6 F-3 +
Kobra 410 TS HS-6 1 x 5 12 10 P-7 F-3 +
**
Automatic Oiler Automatically lubricates cutting knives Standard for all models
**
OPTIONALS DESCRIPTION AVAILABLE Shred Guard - Metal Detection System detects metal presence to prevent damages to cutting unit all models CD / DVD Cutting Unit separate cutting unit for CDs, DVDs, Option on S5, C2, C4 models 3,2 x 50 mm Credit Cards and Floppy disks with Security Level O-3 T-4 E-3 CD / DVD High Security Cutting Unit separate cutting unit for CDs, DVDs, Option on HS and HS6 models 1,5 x 2,5 mm Credit Cards and Floppy disks with Security Level O-6 T-6 E-5
**
**
*Capacity may vary on power supply, paper quality and lubrication of cutting knives
ThroaT
410 mmCabineT
205 lConTinuous
DuTy moTor
Dimensions
60x48x104cm
15
www.elcoman.it
Kobra 430 TS
Kobra 430 TS
*Capacity may vary on power supply, paper quality and lubrication of cutting knives
Conveyor BeltConvenient conveyor belt for easy feeding
of material to shred
Waste bagsRemovable steel trolley with a special interchangeable
bin for 1 x 470 lt or 2 x 235 lt waste bag
Touch Screen Panel
Automatic Oiler - AO Sturdy and large volume 470 Liter steel cabinet equipped with a dedicated oil container holder
Conveyor Belt Industrial Shredder with TOUCH SCREEN control panel available in shredding security level P-3 (DIN 66399). Suitable for archives shredding or as a centralized shredder. High precision design of cutting knives, unaffected by staples and metal clips, allows high shred loads with low power consumption. Equipped with motor thermal protection, KOBRA 430 TS has been designed for a large throughput and long operating time. Shreds up to 125 sheets of paper (A4 70gr); CDs, DVDs, Credit Cards and Floppy Disks. Bag full stop with light signal. Electric conveyor belt to easily fed the cutting knives with material to be shredded for high shredding throughput. KOBRA 430TS is equipped with a sturdy removable caster mounted waste container. Reusable and easy to empty waste bag.
CONVEYOR BELT easy material intake SUPER POTENTIAL POWER UNIT heavy duty chain drive with steel gears TOUCH SCREEN machine functions activated just by touching the control panel SAFETY STOP automatic stop at the door openingAUTOMATIC REVERSE automatic reverse in case of jammingAUTOMATIC OILER automatically lubricates cutting knives
Model Shred sizemm
Sheet capacity* A4 70gr A4 80gr
Security Level DIN 66399
Shreddable Material
Kobra 430 TS C4 5,8 x 50 125/130 100/105 P-3 O-2 T-3 E-2
Automatic Oiler Automatically lubricates cutting knives
ThroaT
430 mmWasTe bag
470 lConTinuous
DuTy moTor
Dimensions
81x161x170cm
16
Kobra TS LINEQuality and Professional
The highest shredding & security performances with the widest choice ever of shredding solutions.
SUPER POTENTIAL POWER SYSTEMSturdy steel gears and metal chain drive system which offer reliability and resistance to wear
24 HOUR CONTINUOUS DUTYContinuous shredding 24 hours a day non-stop without overheating
ENERGY SMART®Stand-by power saving mode after 8 seconds of no use. Automatic disconnection from power supply after 4 hours of non operation
TOUCH SCREEN PANELAll controls are activated by simply touching the panel. Shreds transparent material by keeping the finger on the Forward control for 5 seconds
EPC - ELECTRONIC POWER CONTROLShows the shredding load required to optimise shredding without jams (KOBRA 270/310/410 TS series)
AUTOMATIC REVERSEComes on when too much material is inserted into the shredder to prevent jamming
AUTOMATIC OILERKOBRA cross-cut and High Security shredders can be fitted with a built-in automatic oiling system, with an Oil Warning light, which eliminates the need for manual oiling of cutting knives
METAL DETECTION SYSTEMStops the machine when large metal objects, which could cause a damage to the cutting knives, are accidentally inserted
AUTOMATIC FEEDERJust insert the documents to shred into the automatic feeder and the shredder will shred automatically each documentand turn into its stand-by position when shredding is completed(KOBRA 310 TS series)
SHRED GUARD
METAL DETECTION
SUPE
R PO
TENTIAL POWER SYSTEM
TOUCH SCREEN PANEL
EPC -
ELEC
TRONIC POWER CONTROL
NO OVERHEATING
ON 24 HOUR CON TI NUOUS MOT
OR
AUTOFEEDER
17
P-1 Stripe width max 12mmP-2 Stripe width max 6mm
Data in Original Size on: Paper, Printout, films, printing plates etc.P-6 Cross Cut < 10mm2
P-7 Cross Cut < 5mm2
Data on Optical Carriers: CDs, DVDs etc.
Data on Magnetic Carriers: Credit Cards, Floppy Disks, ID Cards, Magnetic Tape Cassettes, etc.
Data on electronic data carriers: Memory Sticks, Chip cards, Semiconductor Hard Drives, mobile communication media, etc.
P
Reduced size data on: micro-films and foils
Data on Hard Disks (with magnetic data carriers)
P-3 Cross Cut < 320mm2
P-4 Cross Cut < 160mm2
P-5 Cross Cut < 30mm2
O-1 Cross Cut < 2000mm2
O-2 Cross Cut < 800mm2O-6 Cross Cut < 5mm2
O-7 Cross Cut < 0,2mm2O-3 Cross Cut < 160mm2
O-4 Cross Cut < 30mm2
O-5 Cross Cut < 10mm2
T-1 mechanically inoperableT-2 Cross Cut < 2000mm2
T-6 Cross Cut < 10mm2
T-7 Cross Cut < 2,5mm2T-3 Cross Cut < 320mm2
T-4 Cross Cut < 160mm2
T-5 Cross Cut < 30mm2
O
T
E E-1 mechanically/electronically inoperableE-2 Split
E-6 Cross Cut < 1mm2
E-7 Cross Cut < 0,5mm2E-3 Cross Cut < 160mm2
E-4 Cross Cut < 30mm2
E-5 Cross Cut < 10mm2
F F-1 Cross Cut < 160mm2
F-2 Cross Cut < 30mm2F-6 Cross Cut < 0,5mm2
F-7 Cross Cut < 0,2mm2F-3 Cross Cut < 10mm2
F-4 Cross Cut < 2,5mm2
F-5 Cross Cut < 1mm2
HH-1 mechanically/electronically inoperableH-2 damaged
H-6 Cross Cut < 10mm2
H-7 Cross Cut < 5mm2H-3 deformedH-4 Cross Cut < 2000mm2
H-5 Cross Cut < 320mm2
DIN 66399 Security Levels & Data Carrier Classification
FLOPPY disk
245 245 245 245 245 260 260 260 260 270 270 270 270 310 310 310 310
DESKSIDE SHREDDER
KOBRA 245
Security Level DIN 66399
Throat width mm
Shred mm
Sheet Capacity* A4/70gr
KOBRA 260
MODEL
SAFETY STOPOpen door
Automatic Reverse
Technical daTa
Shred
Optionals available
KOBRA 270 KOBRA 310
MEDIUM / LARGE OFFICE SHREDDERMEDIUM OFFICE SHREDDER
S4 S5 C2 C4 S4 S5 C2 C4 S4 S5 C2 C4 SS4 SS5 CC2 CC4
Dimensions cmwidthdepthheight
Weight kg
EPC - Electronic Power Control
standard /with AutoFeeder
KOBRA TS LINE
P-2 P-2 P-2 P-5 P-4 P-2 P-2 P-5 P-4 P-2 P-2 P-5 P-4 P-2 P-2 P-5 P-4
3,8 3,8 5,8 1,9x15 3,9x40 3,8 5,8 1,9x15 3,9x40 3,8 5,8 1,9x15 3,9x40 3,8 5,8 1,9x15 3,9x40
14/16 25/27 27/29 11/13 21/23 26/28 28/30 12/14 22/24 27/29 30/32 12/14 23/25 37/39 45/47 17/19 29/31
. . . . . . . .
40 40 40 40 40 40 40 40 40 53 53 53 53 53 53 53 53 36 36 36 36 36 36 36 36 36 43 43 43 43 43 43 43 43 61 61 61 61 61 80 80 80 80 88 88 88 88 96 96 96/103 96/103
23 24 24 27 27 29 29 32 32 45 45 46 46 56 56 54/57 54/57
optional optional optional optional optional optional optional optional
standard standard standard standard standard standard standard standard standard standard standard standard O-1 T-2 E-2 O-1 T-2 E-2 O-1 T-2 E-2 O-1 T-2 E-2 O-1 T-2 E-2 O-1 T-2 E-2 O-1 T-2 E-2 O-1 T-2 E-2 O-1 T-2 E-2 O-1 T-2 E-2 O-1 T-2 E-2 O-1 T-2 E-2
optional optional
optional optional
optional optional optional optional optional optional optional optional optional optional optional optional optional optional optional optional
S4-SF
*** ***
ENERGY SMART®Management system for power saving stand-by mode
LEGEND DIN 66399 PAPER CD / DVD FLOPPY CREDIT CARD SMART CARD USB FILM P O T T E E F
*Capacity varies on supply power, weight, quality and grain of paper, operating temperature and blade lubrication **Speed calculated at 60 Hz as knife outside diameter x rpm ***Metal Detection system available on all models without Auto Feeder
24 hour continuous duty
AO - Automatic Oiler
AF - Automatic Feeder
LK - Lockable Cover
CD - CD/DVD Cutting Unit
MD - Metal Detection
Voltage V/50-60Hz
Power Watt
Automatic START & STOPthrough electronic eyes
CREDIT CARD
MICRO-FILM / FOILS
CD/DVD/BLU Ray disc
SMART CARD
Memory stick
Waste bin/bag volume l
ENERGY SMART®management system
Noise Level dba
O-2 O-2 O-3 O-2 O-2 O-3 O-2 O-2 O-3 O-2 O-2 O-3
T-2 T-2 T-2 T-5 T-4 T-2 T-2 T-5 T-4 T-2 T-2 T-5 T-4 T-2 T-2 T-5 T-4
T-2 T-2 T-2 T-2 T-2 T-2 T-2 T-2 T-4
E-2 E-2 E-2 E-4 E-3 E-2 E-2 E-4 E-3 E-2 E-2 E-4 E-3 E-2 E-2 E-4 E-3
F-2 F-1 F-2 F-1 F-2 F-1 F-2 F-1
59 55 55 55 55 55 55 55 55 55 55 55 55 58 58 58 58
40 40 40 40 40 60 60 60 60 110 110 110 110 135 135 135 135
230 230 230 230 230 230 230 230 230 230 230 230 230 230 230 230 230
460 460 460 460 460 460 460 460 460 460 460 460 460 920 (2x460) 920 (2x460) 920 (2x460) 920 (2x460)
E E E E E E E E E E E E E E E E E
Speed** m/s 0,15 0,07 0,07 0,07 0,07 0,05 0,07 0,07 0,07 0,06 0,07 0,06 0,07 0,08 0,08 0,07 0,07
standard /with AutoFeeder
Shreddable Material
A4/80gr 11/13 20/22 22/24 9/11 16/18 21/23 23/25 10/12 17/19 22/24 24/26 10/12 18/20 31/33 37/39 14/16 25/27
SAFETY STOPBag full
310 TS AF310 TS
1,9x15 3,9x40 5,8 1,9x15 3,9x40 5,8x50 0,8x9,5 0,8x5 0,8x9,5 0,8x5 0,8x9,5 0,8x5 0,8x9,5 0,8x5 0,8x9,5 1x5 0,8x9,5 1x5
310 310 410 410 410 430 245 245 260 260 270 270 310 310 310 310 410 410
P-5 P-4 P-2 P-5 P-4 P-3 P-6 P-7 P-6 P-7 P-6 P-7 P-6 P-7 P-6 P-7 P-6 P-7
30/32 54/56 68/72 30/32 54/56 125/130 6/8 4/5 6/8 4/5 8/10 4/5 11/13 5/6 20/22 12 20/22 12
. . . . . . . . . . . . .
53 53 60 60 60 81 40 40 40 40 53 53 53 53 53 53 60 60 43 43 48 48 48 161 36 36 36 36 43 43 43 43 43 43 48 48 96 96 104 104 104 170 61 61 80 80 88 88 96/103 96/103 96 96 104 104
88 88 105 112 112 480 29 29 33 33 50 50 57/59 57/59 91 91 128 128
HIGH SECURITY SHREDDERS LEVEL P-6 LEVEL P-7
KOBRA 410 KOBRA 430 KOBRA 245 TS - 260 TS - 270 TS - 310 TS - 410 TS HIGH SECURITY
www.elcoman.it
UNI EN ISO 9001:2008 Cert. No. 9105.EL 16
ISO 9000 REGISTERED QUALITY COMPANY
HEAVY DUTY SHREDDER INDUSTRIAL SHREDDER
S5 C2 C4 C4 245 HS 245 HS-6 260 HS 260 HS-6 270 HS-6270 HS 310 HS-6310 HS 410 HS-6410 HS
KOBRA 310 HD
C2 C4 310 HDHS-6
310 HDHS
shredders are built according to CE standards and carry the most International recognized safety marks
Specifications in this publication are subject to change without notice
and ENERGY SMART®are registered trademarks
optional optional optional optional optional optional optional optional optional O-3 T-4 E-3 O-3 T-4 E-3 O-3 T-4 E-3 O-1 T-2 E-2 O-1 T-2 E-2 O-1 T-2 E-2 O-1 T-2 E-2 O-1 T-2 E-2 O-1 T-2 E-2
optional1,5 x 2,5
O-6 T-6 E-5
optional1,5 x 2,5
O-6 T-6 E-5
standard standard standard standard standard optional optional optional optional optional optional standard standard standard standard standard standard
optional optional optional optional optional optional optional optional optional optional optional optional optional optional optional optional optional
optional optional
optional optional
*** ***
230 230 230 230 230 380-415 230 230 230 230 230 230 230 230 230 230 230 230
T-5 T-4 T-2 T-5 T-4 T-3 T-6
E-4 E-3 E-2 E-4 E-3 E-2 E-5
O-4 O-3 O-2 O-4 O-3 O-2 O-5
T-5 T-4 T-2 T-5 T-4 T-3
F-2 F-1 F-2 F-1 F-3 F-3 F-3 F-3 F-3 F-3 F-3 F-3 F-3 F-3 F-3 F-3
E-4 E-3 E-2 E-4 E-3 E-2
63 63 63 63 63 60 55 55 55 55 55 55 58 58 63 63 63 63
135 135 205 205 205 470 40 40 60 60 110 110 135 135 135 135 205 205
2600 2600 2600 2600 2600 4000 460 460 460 460 460 460 920 (2x460) 920 (2x460) 2600 2600 2600 2600
E E E E E E E E E E E E E E E E E
0,1 0,1 0,1 0,1 0,1 0,21 0,08 0,08 0,08 0,08 0,07 0,08 0,08 0,08 0,1 0,1 0,1 0,1
Shreddable Material
27/29 48/50 60/64 27/29 48/50 100/105 5/6 3/4 5/6 3/4 7/8 3/4 10/11 4/5 18/20 10 18/20 10
Straight-cut
model S2 S4 S5croSS-cut
model c2 c4high Security
model hS hS-6
UNI EN ISO 9001:2008 Cert. No. 9105.EL 16
ISO 9000 REGISTERED QUALITY COMPANY
Via Gorizia, 920813 Bovisio Masciago (MB), ItalyTel +39 0362 593584Fax +39 0362 [email protected]
AD.
LUCA
SAV
ORAN
I
PH. G
IANN
I FRI
GERI
O
CT
-153
/08/
22.1
2.20
16
shredders TS Lineare built according to CE standards and carry the most international recognized safety marks
Technical Data as of 01/2017 Specifications in this publication are subject to change without notice
Authorized Dealer