[ ] Fluokit M+ 24 kV Air Insulated Switchgear
2
CONFORMITY WITH SPECIFICATIONS/ STANDARDS
IEC 62271-100 Standards
SIMPLE AND SAFE IN OPERATION
All operations and access to the compartments are
made from the front of the cubicles.
FLUOKIT M+ cubicles include the following features:
Operating devices include a mimic diagram showing
the position of each breaking, isolation or earthing
device, in complete reliability due to its robustness of the
kinematics chain.
An earthing switch with making capacity, equipped
with a closing operating device independent from the
operator.
Furthermore, in cubicles with load-break switches, the
position of this earthing switch can be seen
unambiguously from the front of the cubicle through an
inspection window in the cable compartment
access door.
Cubicles in the FLUOKIT M+ range all have functional
mechanical interlocks required by the IEC standard:
Interlock between the breaking or isolating device and
the earthing switch.
Interlock between the earthing switch and the cable
compartment access door.
Interlock between the main disconnector and the
circuit breaker for cubicles with circuit breaker (key
locking).
Interlock holding the load-break switch in the open
position when the cable compartment access
door is removed. The earthing switch can then be
operated for the cable test.
RATED VOLTAGE (kV) 7.2 12 17.5 24
Rated withstand voltageLighting impulse (kVp)To earth and between poles Isolating distance
6070
7585
95110
125145
50 Hz 1 mn. (kV rms)To earth and between poles Isolating distance
2023
2832
3845
5060
Short time currentRms value (kA 1s) Peak value (kA peak)
≤25≤63
≤25≤63
≤25≤63
≤20≤50
Cubicle rated current (A)Busbar rated current (A)
≤630≤1250
≤630≤1250
≤630≤1250
≤630≤1250
Withstand to internal arc (kA 1s) 20 20 20 20
Earthing switch making capacity (kA) ≤63 ≤63 ≤63 ≤50
Main enclosure degree of protection IP3X IP3X IP3X IP3X
THE ANSWER TO ALL YOUR NEEDSThe FLUOKIT M+ range is a set of
prefabricated MV distribution
cubicles designed for indoor use.
It includes all basic cubicles used to design MV
modular switchboards from 7.2kV up to 24kV
for :
Public distribution substations,
Delivery substations with low
voltage metering,
Delivery substations with high
voltage metering,
Substations in industry or tertiary internal
networks.
PARS TABLEAU
3
[ ] Fluokit M+ 24 kV Air Insulated Switchgear
PISR Load BreakSwitch Disconnector
SF6 Circuit Breaker Vacuum Circuit Breaker
PISR load break switch disconnector
PISR load break switch disconnector is sealed for life
and equipped with either hand or motorized operating
mechanisms which can be replaced with the switch in
any position.
Separate compartments1. Low voltage cabinet.
2. Busbar compartment
3. Switchgear compartment
4. Cables compartment
5. Operating mechanism
A full range of prefabricated cubicles with small footprintDIMENSION
PISR 24kV
W= 435 mm
X= 766 mm
Y= 190 mm
Z= 137 mm
CONFIGURATION
1. PISR load break switch.
2. Cable earthing switch and/or
upstream earthing switch.
3. Busbar equipment.
4. Equipment for indication of three
phase tripping upon fuse failure.
5. MV fuses.
6. Cable adaptation equipment or HRC
fuse adaptation equipment.
7. Live cable detection equipmeant.
APPLICABLE STANDARDS
IEC 29, IEC 60265, IEC 62102 & NFC 64130 - 131
NFC 64160 - 161
24 kV , Compact Metal Enclosed Switchgear : Fluokit M-24Compact Substation
Quantity 15
90
100
16
20
16
24
16
300
75
50
26
16
71
42
112
17
60
36
106
41
32
200
34
18
25
25
30
33
302
59
136
21
20
111
237
34
55
50
52
17
28
40
31
30
16
Product typeFluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Fluokit M-24
Compact Substation
Compact Substation
Compact Substation
Compact Substation
Compact Substation
Compact Substation
Compact Substation
date
1990
1993
1998
2000
2000
2000
2001
2001
2001
2002
2003
2003
2003
2003
2003
2004
2004
2004
2004
2005
2005
2005
2006
2006
2006
2006
2006
2006
2007
2007
2007
2007
2007
2007
2007
2007
2007
2008
2008
2008
2010
2010
2010
2011
2013
2013
Project NameKerman distribution company
Tehran regional company
Isfahan distribution company
Niro gostar Co
Isfahan distribution company
Tehran North-East distribution Co
Shiraz distribution company
Toos Co
Niro Toseeh
Niro Toseeh Co
Niro Toseeh
Azarakhsh Co
South- West distribution co
Niro Toseeh
Shiraz distribution Co
Shiraz distribution Co
North expansion Co.
Niro Toseeh Co
Eram Complex
Tehran distribution Co
Qum distribution Co
Isfahan distribution Co
Tehran distribution Co
Shiraz distribution Co
Central province distribution Co
Qum distribution Co
North-East distribution co
Isfahan distribution Co
Shiraz distribution Co
Tehran distribution Co
North-East distribution co
Isfahan distribution Co
South-East distribution Co
Electric faz Co.
Isfahan distribution Co
Niroo Sarmye
North-West distribution co
Tehran distribution Co
Shiraz distribution Co
Asiyaye Aram Co
Tehran distribution Co
Electric faz Co.
Electric faz Co.
Tehran distribution Co
Electric faz Co.
Private customer
Sf6 or VACUUM CIRCUIT BREAKER Disconnectable Sf6 or vacuum breaker equipped with
hand or motorized operating mechanism.
1
2 3
4
5
PARS TABLEAU
4
[ ] Fluokit M+ 24 kV Air Insulated Switchgear
Presentation of the Functional Units
Key
1. Busbar connection plates
2. ISR switch-disconnector
3. Upstream Earthing Switch
4. Upper fuse support shell
5. Cable connections shell
6. MV Fuse
7. Capacitive insulator
8. Lower fuse holder shell
9. Downstream Earthing Switch
10. Base plate in 4 elements
11. LV casing
12. Exhaust shaft
13. Overpressure valves
14. Earthing bar connection point
15. Access panel to the busbars
16. Mechanical control mechanism for the switch
17. Circuit breaker mechanical control mechanism (BLR)
18. Voltage presence luminous indicators or interface for
Voltage Detection System
19. Inspection window for checking the earthing switch
position
20. Earthing pin for installation of earthing block
21. Access panel to the cable compartment
22. ES location (LV capacitors)
23. Voltage transformers
24. Auxiliary contacts
25. Current transformers
26. Cable connection lugs
27. FP circuit breaker with interruption under SF6 gas
28. ISR locked in `Open' position
29. Upper plugging-in clamps
30. Lower plugging-in clamps
31. HV Fuse
IS (Switch-Disconnector)
PARS TABLEAU
1
2
7
5
3
13
16
11
1920
21
10
12
14
18
13
22
13
13
13
13
15
5
[ ] Fluokit M+ 24 kV Air Insulated Switchgear
PF - PFA (Fuse Protection)
TM (Instrument Transformer)
PARS TABLEAU
1
2
23
6
3
8
13
14
4
2019
11
16
21
0
13
18
11
4
3
6
9
10
12
13
8
7
21
1920
2
1
14
13
16
22
13
13
13
13
12
24
15
15
6
[ ] Fluokit M+ 24 kV Air Insulated Switchgear
PGB+Current Transformers + FP Circuit Breaker (General Busbar Protection)
PGC + Current Transformers + FP Circuit Breaker (General Cable Protection)
PARS TABLEAU
27
26
17
21
2
1
11
12
16
13
13
25
1
28
3
7
27
25
13
17
21
2
111
12
16
13
13
25
1
2
9
15
15
7
[ ] Fluokit M+ 24 kV Air Insulated Switchgear
SCHEMA
FONCTION IS PF or PFA TM PGCPG -
coupling +LR
WIDTH(mm)
375/500 375/500/750 375/500750/875/112
5375 375/500/750
Incoming or feeder with load break
switch
Cubicle with fused load
break switch for
transformer protection
Cubicle with disconnector fused vt’s for HV metering
function
Cubicle with disconnector and C.B. for
cable protection
Cubicle with disconnector and C.B. for
coupting.
+ Bus riser
A WIDE CHOICE OF
FUNCTIONSFluokit M24 & M24+ meets your
specific requirements in a space
saving configuration.
As the cubicles are modular and have
a very small footprint, switchboards
can be supplied as separate units and
arranged according to your needs.
Load-break switch units are available
in 375mm or 500mm widths, while
Circuit breaker units are available in
750, 875 and 1125 mm widths. All
cubicles have a standard base
depth of 750 & 850 mm, with a
maximum overall Equipment depth of
1100 mm depending on the function.
Depending on the function, basic
cubicles are equipped with either a
SF6 load-break switch, disconnector
or circuit-breaker.
Circuit breakers using either SF6 or EXAMPLES OF APPLICATIONS
SECONDARY DISTRIBUTION SUBSTIONS
Ring type network(LV metering)
to primarysubstation
Ring type network
IS PF or PFA
PF or PFA
Brancn-line
to primary substation
Ring type network(LV metering)
Double supply type network
IS
IS IS IS
IS IS PF or PFA
DD PF or PFA
DELIVER SUSSTATIONS (MV METERING)
IS IS PGC+LR PFA PGC PGC
from primary substation
INTERNATIONAL NETWORK
IS IS PF or PFAMV/LV substation
MV/LV substationIS IS PF or PFA
PARS TABLEAU
WWW.PARSTABLEAU.COM
Des
ign
by:H
adi T
ahm
ase
bi
+
989122410032
Cat. N
o. 01.2
015