LED DRIVER SCC 85W
KEY FEATURES
Model Output current Output voltage Output power
SCC85 - C350 350mA 146 - 243V 85.0W
SCC85 - C700 700mA 73 - 121V 84.7W
SCC85 - C1400 1400mA 36 - 61V 85.4W
SCC85 - C1750 1750mA 29 - 49V 85.7W
SCC85 - C2100 2100mA 24 - 40V 84.0W
SCC85 - C2800 2800mA 18 - 30V 84.0W
MODELS
CHARACTERISTICS
Parameters Value Test conditions / Comment
Input operating voltage AC 100 - 240V -
Input programming voltage AC 160 - 240V -
Input frequency 50Hz -
Input current 0.44A Full load, V = AC 230Vin
Inrush current 50A Cold start, V = AC 230Vin
Leakage current 0.75mA V = AC 230V, 50Hzin
Power factor 0.96 Full load, V = AC 230Vin
Efficiency 88% V = AC 230Vin
Dimming control Programmable, PLC SEAK S-50 PLC
ENERGETICS
Constant current output
C
Built-in module for smart dimming and PLC control
Active power factor correction
Short circuit, over voltage, over temperature protections
Designed to worldwide safety standards for lighting
ooling by free air convection
Encapsulated with IP67 level
5 years warranty
1
www.seakenergetics.com
SEAK, s.r.o., Levocska 109,
080 01 Presov, Slovak republic
SEAK PLC
built-in
Parameters Value Test conditions / Comment
Dimming range 0 - 100% -
Output current accuracy 5% -
Open-circuit voltage
255V SCC85 - C350
127V SCC85 - C700
64V SCC85 - C1400
51V SCC85 - C1750
43V SCC85 - C2100
32V SCC85 - C2800
Turn-on delay time 1S Cold start, power on
Ripple 20% -
Storage -40 - +85C Humidity: 10% RH to 95% RH
Ambient operating temperature -35 - +60C Startup at rated voltage
Operating relative humidity 10 - 100% Non considering
MTBF 300kHrsFull load, AC 220V input,
25C ambient temperature
Dimension (LxWxH) 177x65.5x39.5mm -
Weight 745g -
ENERGETICS
LED DRIVER SCC 85W
2
www.seakenergetics.com
SEAK, s.r.o., Levocska 109,
080 01 Presov, Slovak republic
Parameters Value
Over voltage
115~130% rated output voltage. In latch mode, the power supply
shall return to normal operation only
after the power is turned on again
Short circuitIn hiccup mode, it will recover automatically
fault condition is removed
Over temperature It will recover to normal condition after over temperature
condition is removed
Safety standards UL8750, UL935, UL1012, UL1310 CLASS 2, EN61347-1, EN61347-2-13
EMI EN55015
EMC EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5,EN61000-4-6, EN61000-4-8, EN61000-4-11, EN61547
PROTECTION
MECHANICAL SPECIFICATION(dimensions in mm)
ENERGETICS
LED DRIVER SCC 85W
13
www.seakenergetics.com
SEAK, s.r.o., Levocska 109,
080 01 Presov, Slovak republic
LIFESPAN CHARACTERISTIC
10 000
20 000
30 000
40 000
50 000
60 000
70 000
80 000
90 000
100 000
10 20 30 40 50 60 70 80 90
Op
era
tin
g t
ime
(h
ou
rs)
Case Temperature (C)
0
04_DS085_01_05032015_PMOC
1: 85WStrnka 2Strnka 3Recommended