Rolling Shutter Operator Packages
5331 West Orange St. • Pearland, TX. 77581Ph: 281.485.1911 • Fax: 281.485.0839 • www.rollac.com
Rolling Shutter Operator Packages
Page 2Rollac Standard Operating Packages | V 01-2017
Table of Contents
• Recoil Box - White• Recoil Box - Brown• Crank Box - White• Crank Box - Brown• Gear Operated Shutter• Special Crank Handle• Push and Pull• Switch Options for Regular Motors• Operator Package for Override Motors • Controls for Manual Override• Special Crank Handle for Manual Override• RTS – Remote Control Operation Package• RTS / CMO - Remote Control with Manual Override• Group Control Systems• Manual Override - Typical Parts • Special Crank Handle - Manual Override• Shutter Safety Package• Safety Edge Operator Package• Base Slat Locks
3456789
101112131415161718192021
Rolling Shutter Operator Packages
Page 3Rollac Standard Operating Packages | V 01-2017
Recoil Box - White
Alt: Tape Guide forInterior Mount / Opening Mount.
Tape guide already mounted onto the front of the shutter.
Standard: #7630 / White
Tape Guide for Wall Entry / Exterior Mount)
Used if shutter is installed against the wall and operated from the inside.
Standard: #7614 / White
White Recoil Box withGrey Patterned Tape
(15 mm wide x 1mm [thick] x 5 m (long)Standard: #7433 / White
Depending on the operator chosen – you must specify your accessories. The list of accessories can be found below and is defined for each individual operator.
Rolling Shutter Operator Packages
Page 4Rollac Standard Operating Packages | V 01-2017
Recoil Box - Brown
Alt: Tape Guide for Interior Mount / Opening Mount.
Tape guide already mounted Standard: #7631 / Brown
Tape Guide for Wall Entry / Exterior Mount
Used if shutter is installed against the wall and operated from the inside.
Standard: #7617 / Brown
Brown Recoil Box with Brown Tape (15 mm wide x 1mm (thick) x 5 m (long)
Standard: #7435 / Brown
Rolling Shutter Operator Packages
Page 5Rollac Standard Operating Packages | V 01-2017
Crank Box - White
Alt: Tape Guide for Interior Mount / Opening Mount
Tape guide comes out of the shutter.Standard: #7631 / White
Tape Guide for Wall Entry / Exterior Mount
Used if shutter is installed against the wall and operated from the inside.
Standard: #7614 / White
Crank HandleCrank Length = 140 mm
Chrome Body Color and white handle barStandard: #7534
Crank Box - White, two outlets15mm (wide) x 1mm (thick) x 5.5 m (long)
Grey Tape with White EdgesStandard: #7520
Rolling Shutter Operator Packages
Page 6Rollac Standard Operating Packages | V 01-2017
Crank Box - Brown Color
Alt: Tape Guide for Interior Mount / Opening Mount.
Tape guide comes out of the shutter.Standard: #7631
Tape Guide for Wall Entry / Exterior Mount)
Used if shutter is installed against the wall and operated from the inside.
Standard: #7617
Crank Handle (length = 180 mm),
Chrome Body Colorand white handle bar
Standard: #7535
Crank Box Brown, two outlets
15mm wide x 1mm thick x 5.5 m long Brown Tape
Standard: #7522
Rolling Shutter Operator Packages
Page 7Rollac Standard Operating Packages | V 01-2017
Gear Operated Shutter
Alternative Universal (i.e. recommended for sheetrock installation)
Fixed Crank HandleChrome with 46” Handle
Standard: #6512
Crank Handle HolderGrey plastic
Standard: #6810
Crank HandleSize - 46”
Standard: #6406
Universal Drive Shaft7 mm Hex, 50 cm drive shaft
2 holes, chrome head - 46”Standard: #6205
Rolling Shutter Operator Packages
Page 8Rollac Standard Operating Packages | V 01-2017
Gear Operated Shutter - Special Crank Handle
Crank Handle HolderGrey Plastic
Standard: #6810
Special Crank HandleSize = 53”
for concealed operationStandard: #6455
Typically used for concealed / restricted access operation since crank handle can be removed and there is no other obvious access to operate the shutter.
Rolling Shutter Operator Packages
Page 9Rollac Standard Operating Packages | V 01-2017
Push and Pull Shutters
No operator accessories as shutter is already fully assembled. Push and Pull Operator require a bottom lock. For bottom Lock Choices, see below – BASE SLAT LOCKS:
Rolling Shutter Operator Packages
Page 10Rollac Standard Operating Packages | V 01-2017
Switch Options for Regular Motors
Alternative:
Key Switch MomentaryHeavy Duty with Rain Cover
Surcharge AppliesIf used with another switch in a combo – requires another momentary switch and isolation control
#8462
Paddle Switch Momentary - WhiteIncludes Switch Plate
Also available in IvoryMOMENTARY
#8683#8682
Same as above – just momentary
Alternative:
Paddle Switch Momentary - WhiteIncludes Switch Plate
Also available in IvoryMOMENTARY
#8681#8680
Rocker Switch Momentary - WhiteIncludes Switch Plate
Also available in IvoryMOMENTARY
Standard: #8401 Same as above – just momentary
Rocker Switch Maintained - WhiteIncludes Switch Plate
Also available in IvoryMAINTAINED
Standard: #8402
Rolling Shutter Operator Packages
Page 11Rollac Standard Operating Packages | V 01-2017
Operator Package for Override Motors
Alternative:
Key Switch MomentaryHeavy Duty with Rain Cover
Surcharge AppliesIf used with another switch in a combo – requires another momentary switch and isolation control
#8462
Paddle Switch Momentary - WhiteIncludes Switch Plate
Also available in IvoryMOMENTARY
#8683#8682
Same as above – just momentary
Alternative:
Paddle Switch Momentary - WhiteIncludes Switch Plate
Also available in IvoryMOMENTARY
#8681#8680
Rocker Switch Momentary - WhiteIncludes Switch Plate
Also available in IvoryMOMENTARY
Standard: #8401 Same as above – just momentary
Rocker Switch Maintained - WhiteIncludes Switch Plate
Also available in IvoryMAINTAINED
Standard: #8402
Rolling Shutter Operator Packages
Page 12Rollac Standard Operating Packages | V 01-2017
Controls for Manual Override
Alternative Universal (recommended for sheetrock installation)
Fixed Crank HandleChrome with 46” Handle
Standard: #6512
Crank Handle HolderGrey Plastic
Standard: #6810
Crank HandleSize - 46”
Standard: #6406
Universal Drive Shaft7 mm Hex, 50 cm drive shaft
2 holes, chrome headSize - 46”
Standard: #6205
Rolling Shutter Operator Packages
Page 13Rollac Standard Operating Packages | V 01-2017
Special Crank Handle for Manual OverrideSpecial Crank Handle. Typically used for concealed / restricted access operation since crank handle can be removed and
there is no other obvious access to operate the shutter.
Crank Handle HolderGrey Plastic
Standard: #6810
Special Crank HandleFor concealed operation
Size - 53”Standard: #6455
Rolling Shutter Operator Packages
Page 14Rollac Standard Operating Packages | V 01-2017
RTS – Remote Control Operation Package
Remote Transmitter 1 Channel White
Standard: #8745
RTS KeypadSurcharge
#8891
RTS Wall Transmitter5 Channel White, Decoflex
Includes faceplate and installation bracket.
Surcharge
#8842 Same as above – just for 5 Channel.
RTS Wall Transmitter1 Channel White Decoflex
Includes faceplate and installation bracket.
Surcharge
#8810
Remote Transmitter 4 ChannelSurcharge
#8746
Rolling Shutter Operator Packages
Page 15Rollac Standard Operating Packages | V 01-2017
RTS / CMO - Remote Control with Manual Override
RTS KeypadSurcharge
#8891
RTS Wall Transmitter5 Channel, White, Decoflex
Includes faceplate and installation bracket.
Surcharge
#8842 Same as above – just for 5 Channel.
RTS Wall Transmitter1 Channel, White, Decoflex
Includes faceplate and installation bracket.
Surcharge
#8810
Remote Transmitter4 ChannelSurcharge
#8746
Remote Transmitter1 Channel - White
Standard: #8745
Operator Package and Choices for Remote Control
Rolling Shutter Operator Packages
Page 16Rollac Standard Operating Packages | V 01-2017
Commercial Group Control Systems
IGC 4/N1 Group Control SystemGroup Controller - controls up to 4 Shutters
individually or as a group via a master switch. IGC 4/N1 can be interconnected via Cat 5 cable. For
more details, see spec sheets.
#8788
DecoFlex Dry Contact KeypadUsed in combination with the IGC controllers. Require extra CAT 5 cable to connect to IGC.
#8790
IGC RTS Receiver for Remote Control use
For use with remote control. Unit has a maximum receiving radius of 30 feet. Radius can be less i.e.
in concrete buildings, metal buildings, etc.
#8931
Remote Control for IGC ReceiverRemote control that sends the
signal to IGC RTS receiver#8745
If you need additional information or other control solution / integration, please contact Rollac 281-485-1911
Rolling Shutter Operator Packages
Page 17Rollac Standard Operating Packages | V 01-2017
Typical Parts to Control the Manual Override
Universal Drive Shaft7 mm Hex, 50 cm drive shaft2 holes, chrome head - 46”
Standard: #6205
Crank HandleSize - 46”
Standard: #6406
Crank Handle Holder (Grey)Standard:
#6810
Alternative Universal (recommended for sheetrock installation)
Fixed Crank HandleChrome with 46” Handle
Standard: #6512
Rolling Shutter Operator Packages
Page 18Rollac Standard Operating Packages | V 01-2017
Special Crank Handle for Manual OverrideSpecial Crank Handle. Typically used for concealed / restricted access operation since crank handle can be removed and
there is no other obvious access to operate the shutter.
Special Crank HandleSize - 53”
Standard: #6455
Crank Handle HolderGrey Plastic
Standard: #6810
Special Top of Crank (top) to engage directly with gear.
Rolling Shutter Operator Packages
Page 19Rollac Standard Operating Packages | V 01-2017
Shutter Safety Package
Smart Motor Control #8396
Metal Box for Smart Motor Control #8502 Not Shown
Photo Eye Beams #8930
Universal RTS Receiver #8931
Single Channel Transmitter #8745
Recommended for Garage Doors:
RTS Wall Transmitter1 Channel, White, Decoflex.
Includes faceplate and installation bracket.#8810
Includes Smart Motor Control, RTS Receiver, Photo Cells. Works only with Regular Override Motor
Rolling Shutter Operator Packages
Page 20Rollac Standard Operating Packages | V 01-2017
Safety Edge Operator Package
Smart Motor Control(Requires 4 wire Motor)
#8396
MWRTA-12Transmitter and Receiver
Transmitter has audible low battery alarm.
Sold with CompleteShutter Package
Please inquire for details
ME111–2E–102-Wire Safety Edge
ME110-C PVCAdapter Profile for Safety Edge
(not shown)
Sold with CompleteShutter Package
Please inquire for details
Remote Transmitter1 Channel - White
Standard: #8745
IGC RTS Receiver for Remote Control use
For use with remote control. Unit has a maximum receiving radius of 30 feet. Radius can be less i.e.
in concrete buildings, metal buildings, etc.
#8931
Metal Box for Smart Motor Control
#8502 Not Shown
Rolling Shutter Operator Packages
Page 21Rollac Standard Operating Packages | V 01-2017
Base Slat Locks
Slide Locks Integrated into Base Slat
#9021Maxi
#9019Mini
Maxi Cylinder Key LockUsed on maxi and mini base slats
#9015
Heavy Duty Commercial LockIntegrated into Base Slat
Sold with CompleteShutter Package
Please inquire for details
Best Cylinder Interchangeable Commercial Lock Integrated into Base Slat
Sold with CompleteShutter Package
Please inquire for details
Surcharge Applies
Rolling Shutter Operator Packages
Page 22Rollac Standard Operating Packages | V 01-2017
Base Slat Locks
Commercial Lock Standard Key
#9071
Thumb Turn Commercial Lock
#9072
Best Cylinder Lockwith Interchangeable Construction Core
#9074Core Cylinder Case w/ collars
#9075Construction Key Core
#9076Construction Master Key
(Not Pictured)
Commercial Lock Integrated into Base Slat
#9026 for Guide Rails)
#9027for base slat
9026
90759074
9027
Surcharge Applies
1.888.2-ROLLAC281.485.1911281.485.0839
toll freephonefax
5331 West Orange StreetPearland, TX 77581
PARTNER
23www.rollac.com
ExperienceTechnologyHigher Standards
Since 1982, Rollac has operated with a vision of quality, service, and modern technology to produce the best possible product for our customers. Each product is custom manufactured for every single job to ensure the best fit and finish. Regardless if you are looking to enhance security, add comfort to a space, or seek protection from the elements, Rollac has the solution for your home or work environment.