000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSShad Double Hook Shad Cork Bait Shad Drift Trace Shad Drift Bait Shad Foam Bait Improved Cutlet Cutlet Perfect Lightweight Bait Baiting the Bottom of a Sardine Small Bait with a Sardine Bottom A Neat Bright Bait Grunter 3 Ways of Hooking a Live Sardine or Sardine Head Throw Bait Slide Bait Without Cotton With High Density Foam Inside Smelly, Bloody Bait
RED EYE BAITSThrowing a Whole Red Eye Inside Out Brown Skate CutletRed Eye Cutlet with Chokka Grunter Wala Wala Bait
Figure 8 Knot
08
0607
09101213141516171819
2021222324
272625
282930
CONTENTS
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
31323335
3637
38394041
43454647484951525455565758
CHOKKA BAITSBasic Bonefish BaitChokka and Red Eye Sliding a Whole Chokka
PRAWN BAITSBasic With Chokka
MACKEREL BAITSDiamond Skate Bait Cow Shark Bait Sliding a Whole Mackerel Throw Bait
SPECIALIZED BAITSMassbanker Baits: Basic Bay Squid Baits: Basic Bay Squid Baits: Improved Octopus Baits: Basic Sand Prawn: Basic Cuttlefish Baits: Throw Bait Cuttlefish Baits: Live Cuttlefish Cuttlefish Baits: Cuttlefish and Prawn Sealice Baits: Basic Crab Baits: Stumpie and Brusher Mussel Baits: Baiting a Whole Mussel Mussel Baits: Baiting the Mussel Inner Crayfish Baits: With Chokka
CONTENTS
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
Crayfish Baits: Blob Basic Crayfish Baits: With Camo Worm Red Baits: Red Bait
BONITO BAITSSlide BaitThrow Bait
BROWN SKATERed Eye Bait
SHARK BAITSHammerhead Baits: Throw Bait Hound Shark Baits: Throw Bait Lesser Baits: Red Eye Bait Sand Shark Baits: Red Eye Bait Ragged Tooth Baits: Throw Bait
LIVE BAITS Where to Pin your Live Bait
CAST NET Basic
MULLET BAITSLive Bait 1 Live Bait 2 Mullet Live Throw Bait Mullet HeadDangle with Mullet Skinned Mullet Live Mullet - Slide Bait Mullet Bait for Raggies
606162
6365
68
7073767778
80
82
81
83848586878990
CONTENTS
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
The Angling Times Rock and Surf Bait Guide has been designed to enable novice to intermediate anglers to attempt a variety of techniques to land that “big one”. All techniques are however only a general guideline and represents only a portion of the various techniques possible and the numerous fish species that may be targeted using them.
I hope that all anglers using this book find it a useful tool in extending your angling knowledge. Best of luck to you and may you always have tight lines and fantastic fishing memories.
Acknowledgements: A special thanks to Ray Thompson for performing the bait presentations and imparting his expert angling knowledge. To all the advertisers in the Angling Times Bait Guide, much gratitude is expressed as without your support this book would not have been possible.
RAB
Copyright of all material is expressly reserved and nothing maybe reproduced in part or whole without the permission of the publisher (Mainstream Media). While every effort is made to ensure the accuracy of the contents of this publication, the publishers do not accept responsibility for any errors or omissions or their consequences. E.O & E.
Rock & SurfBAIT GUIDE
VOLUME 5
EDITORIAL DIRECTOR: Vinesh Soogreem |
GRAPHIC DESIGN:
Wade Houghton / Muhammed Nadeer Asaraf BAIT GUIDE ENQUIRIES: 031 266 0285 - 083 792 8977 - [email protected]
PUBLISHING: Mainstream Media
OTHER MAINSTREAMMEDIA PUBLICATIONS:
BAITBAIT LURETRACESALTWATER
GuideFRESHWATEROFFSHORE ARTIFICIAL
Bag and size limits are as stipulated by the Department of Agriculture Forestry and Fisheries: Marine Recreational Activity Information Broucher 2011/2012 and was correct at time of going to presses. Mainstream Media will not be held liable for any changes to such information after the publication of this book. You are encouraged to visit the Department of Agriculture Forestry and Fisheries website (www.daff.gov.za) Tel: (021) 402 3911 or contact KZN Wildllife to update such information.
OUR BAITING ARTISTMR. RAY THOMPSON
05
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSDOUBLE HOOK SHAD BAIT
000 ROCK & SURF BAIT GUIDE
Requirements: Double Hook Shad Trace, knife, cotton and a Sardine.
1
Pierce the first hook from the back to the front of the bait.
Cut off the head and tail of the Sardine.
2
Pierce the second hook through the bait.
Bind the hooks for a final presentation of a double hook Shad bait.
5 6
3
06ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSSHAD CORK BAIT
000ROCK & SURF BAIT GUIDE
Conventional Shad trace and a Sardine.
1
Pierce the hook through the bait. Bring the hook all the way through to sit at the belly of the bait.
Cut the Sardine in half.
2
4
9
Bind the bait from the hook to the tail.
Final presentation of a Shad corkbait.
5 6
3
07ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSSHAD DRIFT TRACE
000 ROCK & SURF BAIT GUIDE
Tie the nylon coated wire to a Shad hook using a Figure of 8 knot.
1
Presentation of hooks so far. Figure of 8 to join nylon coatedwire to line.
Slide a 2nd hook down the nylon coated wire, wrap around the hook and bring it through the eye.
2
4
9
Slide down the top hook through the nylon. Then knot.
The final presentation of the trace.
5 6
3
08ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSSHAD DRIFT BAIT
000ROCK & SURF BAIT GUIDE
Shad drift trace and a Sardine.
1
Insert the second hook into the bait, to sit in front of the last hook.
Pull the hook down to allow flexibilityfor the nylon coated wire.
Insert the last hook of the trace intothe tail end of the Sardine and bringit in all the way through.
2
4
9
Insert the top hook through the noseof the bait.
Final presentation of a drift bait.
5 6
3
09ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSSHAD FOAM BAIT
000 ROCK & SURF BAIT GUIDE
Sardine and a large piece if foam. Bind around with two Shad hooks.
1
Remove the head from bait. Cut the body of the Sardine downthe middle.
Cut the head off the Sardine.
2
4
9
Open up the bait completely. Remove the spine from the bait.
5 6
3
10ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSSHAD FOAM BAIT
000ROCK & SURF BAIT GUIDE
Insert the lower hook through the middle of the bait. Insert hook through the skin.
7
Wrap over one side of the bait and hold in place.
Fold over the other side of the Sardine.
The upper hook should sit above thebait.
8
10
9
Bind the bait. Final presentation of the bait.
11 12
9
11ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSIMPROVED CUTLET
000 ROCK & SURF BAIT GUIDE
Cut a frozen Sardine from the tail up.
1
Option A - Pierce the hook throughthe bait.
Option B - Tie an elastic around the hook and then wrap the band around the bait.
Cut the Sardine into cutlets.
2
3 4
12ROCK AND SURF DIGITAL BAIT GUIDE
80-8182-8586-8788-91
92-95969798-99
101
102
104105106107108109-110111112-114115-116117-120122-123
124125-127128129130
C
rayfish Baits: Blob Basic Crayfish Baits: With Camo Worm Red Baits: Red Bait
BONITO BAITSBonito Baits: Slide BaitBonito Baits: Throw Bait BROWN SKATERed Eye Bait SHARK BAITSHammerhead Baits: Throw Bait Hound Shark Baits: Throw Bait Lesser Baits: Red Eye Bait Sand Shark Baits: Red Eye Bait Ragged Tooth Baits: Throw Bait
LIVE BAITS: Where to Pin your Live Bait
CAST NET: Basic
MULLET BAITSLive Bait 1 Live Bait 2 Mullet Live Throw Bait Mullet HeadMullet Baits: Dangle with Mullet Mullet Baits: Skinned Mullet Mullet Baits: Live Mullet - Slide Bait Mullet Baits: Mullet Bait for Raggies
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSCUTLET
000ROCK & SURF BAIT GUIDE
Start the slicing the Sardine in a 45 degree angle.
IDEAL FOR TARGETING: KIngfish, Grey Sharks, Rays
1
Use the middle piece to pin hook. Bind another piece to this.
Slice out 3 cutlets of Sardine.
2
4
9
3
Add eyes to complete the bait. Final presentation the the bait.
65
13ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSPERFECT LIGHTWEIGHT BAIT
000 ROCK & SURF BAIT GUIDE
Start by filleting the tail piece of the Sardine along the spine.
IDEAL FOR TARGETING: Blacktails, Bronze Bream, Stumpies
1
Cut out the Sardine belly and intestines.
Turn the belly of the Sardine over and pierce the hook through. Bind onceagain.
Bind the Sardine onto your hook.
2
9
3
On the opposite side of the belly, bind on the intestines.
Finally you will have a perfectlightweight bait.
65
4
14ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSBAITING THE BOTTOM OF A SARDINE
000 ROCK & SURF BAIT GUIDE
Begin by binding a piece of polystyrene onto the hook.
IDEAL FOR TARGETING: Kob, Stumpies, Lesser, Rays
1
Split the bait in half.
Cut off the Sardine head.
2
3
Pin the hook through this half. Wrap around the hook and bind.
54
15ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSSMALL BAIT WITH A SARDINE BOTTOM
000ROCK & SURF BAIT GUIDE
Cut off the Sardine tail.
IDEAL FOR TARGETING: Kob, Stumpies, Lesser, Rays
1
Split and open the bottom half.
Cut the Sardine in half.
2
3
Pin the hook through the middle and wrap bait around.
Finally bind the bait.
54
16ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSA NEAT BRIGHT BAIT
000 ROCK & SURF BAIT GUIDE
Cut off the Sardine head and tail.
IDEAL FOR TARGETING: Kingfish, Kob, Springer
1
Split the belly in half.
2
Add a piece of polystyrene and bind.
3
Add and bind eyes around the bait.
4
Adding tinsel is always a good touch. Hook through the belly and bind.
65
17ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSGRUNTER
000ROCK & SURF BAIT GUIDE
Use no.1 baitholder hook.
IDEAL FOR TARGETING: Rockcod, Kob, Stumpies, Rays
1
Cut the Sardine belly in 3 pieces asabove.
2
Pin hook through longer piece.
3
Bind shorter piece above it.
4
Bind entrails for scent. Final presentation of a Grunter bait.
65
18ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITS3 WAYS OF HOOKING A LIVE SARDINE OR
SARDINE HEAD
000 ROCK & SURF BAIT GUIDE
Using two hooks back to back, pin theSardine through the nose.
IDEAL FOR TARGETING: Garrick, Kingfish, Rays
LIVE SARDINE SARDINE HEAD1
With the hook facing up, from between the bottom of the mouth andthrough the eyes.
1
Pin the hook through the nose and use the sinker.
2
With the hook facing down and the nylon coated wire coming through the gills.
2
Pin the bait through the back. Same as step 2, however expose moreblood and colour by cutting off the gill.
33
19ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE 000ROCK & SURF BAIT GUIDE
Hook from behind the head betweenthe eyes.
IDEAL FOR TARGETING: Kingfish, Kob, Rays
1
Use toothpick to hold hook in place.
2
Add polystyrene on top and bind the bait.
3
Make sure to bind the Sardines tail.
4
Final presentation of bait. Note the position of the hook for better aerodynamics when casting.
65
SARDINE BAITSTHROW BAIT
20ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SARDINE BAITSSLIDE BAIT
000ROCK & SURF BAIT GUIDE
Use a normal slide trace.
IDEAL FOR TARGETING: Bronze Whaler, Grey Sharks, Rays
1
Hook the head from under the mouth to between the eyes.
Cut off the tails of the Sardines.
2
3
Repeat this with all Sardines. An alternative way is to use 2 hooks facing opposite ends with one of the hooks through the belly and the other through the head.
54
21ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE000 ROCK & SURF BAIT GUIDE
Pin hook on the side of the Sardine, behind gills.
IDEAL FOR TARGETING: Garrick, Rays
1
Pull out the hook in front of eyes.
2
The ring of the hook should sit insidethe bait.
3
Tie the nylon twice around the tail.
4
Final presentation of bait. Final result of bait.
65
SARDINE BAITSWITHOUT COTTON
22ROCK AND SURF DIGITAL BAIT GUIDE
SHAPING THE FOAM: Basic Surf Casting with Fixed Spools by Barry Warehem BAG AND SIZE LIMITS KNOTSAlbright Knot Bimini Twist Snell Knot Palomor KnotFigure 8 Knot
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE 000ROCK & SURF BAIT GUIDE
Cut the Sardine into an aerodynamicshape.
IDEAL FOR TARGETING: Shad, Springer
1
Split the centre of the bait.
2
Cut the Sardine all the way downfrom head to tail.
3
Open the Sardine.
4
Add polystyrene in the middle and hook.
Close the Sardine and bind togetherwith cotton.
65
SARDINE BAITSWITH HIGH DENSITY FOAM INSIDE
23ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE000 ROCK & SURF BAIT GUIDE
Split the entire Sardine in half.
IDEAL FOR TARGETING: Kob, Sharks, Rays
1
Pin the hook through the middleof the head.
2
Wrap the bait around the hook.
3
Bind the bait and get another Sardine ready.
4
Repeat the first 3 steps and bind again.
Final presentation.
65
SARDINE BAITSSMELLY, BLOODY BAIT
24ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
RED EYE BAITSTHROWING A WHOLE RED EYE
000ROCK & SURF BAIT GUIDE
Insert the bait needle from the back of the Red Eye to the front.
1
Tie the trace line to the hook of the bait needle and remove the baitneedle from the Red Eye.
Turn the hook to sit above the Red Eye head for better aerodynamicswhen casting.
The bait needle must be straight with the hook end coming out of the gills.
2
3 4
IDEAL FOR TARGETING: Garrick, Kob, Rockcod, Rays
25ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
RED EYE BAITSINSIDE OUT
000ROCK & SURF BAIT GUIDE
Fillet the Red Eye along the spine on either end.
1
Bind the cut off section to the hook. Insert the hook through the throat of the Red Eye and out the bottom jaw.
Cut off the spinal section all the wayto the tail.
2
4
9
Wrap the filleted pieces around the hook.
Remove the Red Eye head from the bait.
5 6
3
IDEAL FOR TARGETING: Kob, Springer, Grunter
26ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
RED EYE BAITSBROWN SKATE CUTLET
000 ROCK & SURF BAIT GUIDE
Cut out 3 cutlets from the bait.
1
Pierce the hook through the first (thicker) cutlet and place 1 of the thinner cutlets behind it.
Bind the cutlets around the hook.
Two of the cutlets should be thin with the 3rd slightly thicker.
2
4
Place the 3rd thin cutlet over the bait. Bind the cutlets for a final presentation.
5 6
3
IDEAL FOR TARGETING: Kob, Springer, Grunter
27ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
RED EYE BAITSRED EYE CUTLET WITH CHOKKA
IDEAL FOR TARGETING: Kingfish, Grey Sharks, Rays
000ROCK & SURF BAIT GUIDE
Cut a tail end of a Red Eye and a neatlong piece of Chokka.
Bind the bait into an aerodynamic shape.
1
Add and bind the Chokka to illustrate tentacles.
Add a piece of polystyrene to the bait.
Pierce the hook through the Red Eyefrom back to front.
2
54
3
28ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
RED EYE BAITSGRUNTER
000ROCK & SURF BAIT GUIDE
Remove the tail and cut the Red Eyein a 45 degree angle below the belly.
1
Pierce the hook through the bottomof the cut portion.
Pierce the fillet through the hook and wrap around bait.
Fillet the Red Eye Belly.
2
4
9
Split and open the Red Eye head. Wrap and bind the head around the bait (opposite end of the fillet).
5 6
3
IDEAL FOR TARGETING: Rockcod, Kob, Stumpies, Rays
29ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
RED EYE BAITSWALA WALA
000 ROCK & SURF BAIT GUIDE
Requirements: A Wala Wala trace, Red Eye Sardine, knife and latex cotton.
1
A filleted piece of Red Eye Sardine. Cut a slit into the bait and insert the hook through the skin.
Cut the bait along the spine from the bottom upwards.
2
4
9
Turn the hook around and lay the wire along the skin of the bait.
Wrap the bait over the hook, lay the 2nd hook over the flesh and bind the bait for a final presentation.
5 6
3
IDEAL FOR TARGETING: Kob, Springer, Grunter
30ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CHOKKA BAITSBASIC
000ROCK & SURF BAIT GUIDE
Start by binding the foam to the hook.
1
Pierce the hook through an end of the Chokka. Fold the piece over the foamand bind well.
Hammer a long and narrower piece ofChokka to use as a tentacle.
Cut off a piece of Chokka and hammer firmly.
2
4
Pierce the middle of the Chokka through the hook. Bind the rest over the existing bait.
5 6
3
IDEAL FOR TARGETING: Kingfish, Kob, Rays
Glow-in-the-dark eyes can be boundon to give you the perfect bait.
31ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CHOKKA BAITSBONEFISH BAIT
000 ROCK & SURF BAIT GUIDE
Requirements: A piece of Chokka, Bonefish trace, 3D eyes, glitter, cotton, Chokka hammer and a knife.
1
Tenderize the bait and bind the thinner piece around the hook.
Add various shades of glitter over the bait.
Cut off 2 pieces of Chokka.
2
4
Bind the larger piece of Chokka over the bait.
Bind the 3D eyes over the bait for a final presentation.
5 6
3
IDEAL FOR TARGETING: Bonefish, Kingfish, Kob, Rockcod, Rays
32ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CHOKKA BAITSCHOKKA & RED EYE
000ROCK & SURF BAIT GUIDE
Requirements: 2 hooks, polystrene,glass rattle and glow bead.
1
Pierce the Chokka through the frontand bind.
Remove the head of the Red Eye Sardine.
Cut off a long narrow piece of the Chokka and hammer it.
2
4
Divide the Red Eye Sardine betweenthe tail and the body.
Split the body in half and divide into4 pieces as above.
5 6
3
IDEAL FOR TARGETING: Kingfish, Kob, Rockcod, Rays
33ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CHOKKA BAITSCHOKKA & RED EYE
000 ROCK & SURF BAIT GUIDE
Bind a piece of the fleshy body andentrails to the Chokka.
7
Cut off another piece of the Chokka and place the Red Eye head over it.
Hammer the Red Eye Sardine headinto the Chokka.
Reapeat step no.7 to the back end of the trace.
8
10
Once hammered into a pulp, bind overexisting trace.
Final presentation of the perfectKob bait.
11 12
9
IDEAL FOR TARGETING: Kingfish, Kob, Rockcod, Rays
34ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CHOKKA BAITSSLIDING A WHOLE CHOKKA
000ROCK & SURF BAIT GUIDE
Start by measuring the length of the trace you require. This should be from the eyes to the end of it.
1
If the trace is tied and measured correctly, it should look like this with hooks facing the same direction.
Using the first hook, piercing the Chokka through the hard shell. Bring out the hook through the head and between the eyes.
Attach the second hook by binding the carbon coated wire around the hook and through the eye of it.
2
4
Insert the carbon coated wire trace through the tail end of the Chokka at the point of where the second hook will be.Slide the wire through the back of the bait.
5 6
3
IDEAL FOR TARGETING: Bronze Whaler, Grey Sharks, Rays
Pull the carbon coasted wire until the hooks sit firmly into place. A toothpickcan also be used to prevent this from moving.
35ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
PRAWN BAITSBASIC
000ROCK & SURF BAIT GUIDE
Make a wish bone trace.
1
(A) Make a loop in the front of theeye of the hook.
1A
(B) Put a 1mm piece of nylon through and pull.
1B
Neatly open and deshell the prawn.
2
9
Pin the Prawn through, fold and bind.
IDEAL FOR TARGETING: Bream, Galjoen, Blacktails, Stumpies
3
STEP 1 - TO MAKE A WISHBONE TRACE
STEP 2 - TO MAKE A WISHBONE TRACE
36ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
PRAWN BAITSWITH CHOKKA
000 ROCK & SURF BAIT GUIDE
Cut a piece of Chokka and deshell thePrawn.
1
Pin and fold the Prawn around the hook.
Pierce fold and bind the Chokka overthe hook.
Neatly split the Prawn and hammer the Chokka.
2
4
9
Add glitter over the bait for an added effect.
Final presentation of the bait.
5 6
3
IDEAL FOR TARGETING: Kingfish, Pompano, Stumpies, Sharks
37ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MACKEREL BAITSDIAMOND SKATE
000ROCK & SURF BAIT GUIDE
Cut off the head from the Mackerel in a 45 degree angle.
1
Place the fillet over the head of the Mackerel.
Bind with latex cotton.
Fillet a piece of the Mackerel from the tail upwards.
2
4
9
Pierce the hook from the jaw and out through the nose of the bait.
Final presentation of the bait.
5 6
3
38ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MACKEREL BAITSCOW SHARK
000 ROCK & SURF BAIT GUIDE
Requirements: Mackerel head with fillet, double hook Cow Shark trace, cotton and a knife.
1
Bring the hook through the nose and insert into the head of the Mackerel.
Pull on the nylon coated wire to lock the hook into place.
Insert the longer hook through the jaw of the Mackerel.
2
4
Insert the 2nd hook through the lower jaw of the Mackerel.
Final positioning of hooks and presentation of a Cow Shark bait.
5 6
3
IDEAL FOR TARGETING: Skarks and Rays
39ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MACKEREL BAITSSLIDING A WHOLE MACKEREL
000ROCK & SURF BAIT GUIDE
The length of the trace should be measured from the head of the Mackerel to approx. 3-6cm before the end of it.
1
Pierce the top hook through the bottom of the mouth and out the nose of the Mackerel.
Shaping the Mackerel allows the bait to bemore aerodynamic and prevents the baitfrom spinning in the water when sliding.
Attach the bottom hook a few millimetres below the belly of the Mackerel.
2
4
Tying cotton around the mouth and nylon coated wire at this point of the bait will keepthe Mackerel aligned.
To keep the bottom hook in place, use a toothpick through the eye of the hook and cut it off.
5 6
3
IDEAL FOR TARGETING: Kingfish, Grey Shark, Kob
40ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MACKEREL BAITSTHROW BAIT
000ROCK & SURF BAIT GUIDE
Requirements: Mackerel, Dingle andcotton.
1
Remove piece all the way to the tail. Cut the bait half way through fromthe head to the tail.
Start by cutting the Mackerel from the head down.
2
4
9
Insert the dingle onto the bait. The eye of the dingle must come through the mouth.
5 6
3
41ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MACKEREL BAITSTHROW BAIT
000 ROCK & SURF BAIT GUIDE
Bind the bait together.
7
Insert a toothpick through the eye ofthe front hook to hold into place.
Bind the hooks into place.
Insert a hook through the eye of the dingle at the back of the bait.
8
10
9
Final presentation of bait. Sinker attached to the front eye of the dingle.
11 12
9
42ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MASSBANKER BAITSBASIC
000ROCK & SURF BAIT GUIDE
Fillet the bait from back to front.
1
Repeat this process on the top of the bait.
Peel off the skin.
Gently fillet the belly from back tofront.
2
4
9
Cut off the front fin . Remove the fornt gill.
5 6
3
IDEAL FOR TARGETING: Rays
43ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MASSBANKER BAITSBASIC
000 ROCK & SURF BAIT GUIDE
The presentation should look like thisbefore proceeding.
7
Break off the spinal section of the bait.
Pin the hook from the mouth to the top.
Fillet from back to front of both ends.
8
10
Fold the fillets to the front of the bait and bind.
An alternative way of hooking the bait: Pin the hook from the front ofthe bait to the back and hold with atoothpick.
11 12
9
IDEAL FOR TARGETING: Rays
44ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
BAY SQUID BAITSBASIC
000ROCK & SURF BAIT GUIDE
Trace requirements: hooks, polystyrene, eyes and tinsel.
1
Peel off the outer skin of the Bay Squid.
2
Remove the head and entrails and shape the skin as above.
3
Pin the long narrow piece through the hook.
4
Gently hammer the wider piece of theskin.
Bind then add eyes and tinsel to thebait.
5 6
IDEAL FOR TARGETING: Kingfish, Kob, Lesser, Rays
45ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
BAY SQUID BAITSIMPROVED
000 ROCK & SURF BAIT GUIDE
Bind the high density foam to the hook and insert a toothpick through the eye of the hook.
1
Cut the Bay Squid down the middle.
2
Remove the outer skin and gently slice fine grooves over it.
3
Bind the outer skin over the hook.
4
Place the inner body of the squid overthe bait and bind.
Final presentation of the bait.
5 6
IDEAL FOR TARGETING: Kingfish, Kob, Lesser, Rays
46ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
OCTOPUS BAITSBASIC
000ROCK & SURF BAIT GUIDE
Octopus tentacle.
1
Using a bait needle, insert the needle from the back to the front of the bait.
Loop the trace line through the hookof the needle and pull it out the backof the bait.
Peel off the skin from the tentacles.
2
4
9
Use a toothpick to hold the front hook in place.
Add a second hook and polystyrene to the back of the bait and bind.
5 6
3
IDEAL FOR TARGETING: Kingfish, Pompano, Stumpies, Sharks
47ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SAND PRAWNBASIC
000 ROCK & SURF BAIT GUIDE
Use a hook with the float attachedto it.
Pierce the hook through the hard upper abdomen of the Sand Prawn, curving the hook from the bottomand out the top.
1 2
Straighten the Sand Prawn over the hook and onto the trace line. Bind the bait from abdomen to tail.
Add a few more Sand Prawn to the bait by binding them over the hook.The hook must still be prominent.
3 4
IDEAL FOR TARGETING: Grunter, Pompano, Bream, Stumpie
48ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CUTTLEFISH BAITSTHROW BAIT
000ROCK & SURF BAIT GUIDE
Requirements: Cuttlefish, Chokka hammer, cotton, dingle and bait knife.
1
Cut off the piece of Cuttlefish and remove the skin.
Hammer this piece of bait.
Cut the back of the bait down the middle.
2
4
Cut off another thinner piece of bait. Bind the thinner piece of bait over the dingle.
5 6
3
49ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CUTTLEFISH BAITSTHROW BAIT
000 ROCK & SURF BAIT GUIDE
Wrap and bind the bigger piece of bait over.
7
Remove the stomach of the Cuttlefish.
Neatly divide and clean up the stomach.
Insert the circle hook through the eyeof the dingle and bind the other hook over the bait.
8
10
Bind one piece of stomach around the bait on either side to represent eyes of the bait.
Final presentation of the bait.
11 12
9
50ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CUTTLEFISH BAITSLIVE CUTTLEFISH
000ROCK & SURF BAIT GUIDE
Requirements: Live Cuttlefish and acircle hook.
1
Bring the hook all the way through. Final presentation of the bait.
Turn the bait around and insert thehook at the back of the bait.
2
43
51ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CUTTLEFISH BAITSCUTTLEFISH & PRAWN
000ROCK & SURF BAIT GUIDE
Cut out the outer shell.
1 2
3 4
Cut out 2 strips from the top layer that has been peeled off.
Using a no.4 hook, pierce through oneof the cut out strips and bind.
Peel off the top layer of theCuttlefish.
IDEAL FOR TARGETING: Kob, Kingfish, Rays
52ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CUTTLEFISH BAITSCUTTLEFISH & PRAWN
000 ROCK & SURF BAIT GUIDE
Place the other strip over the hookand bind.
Deshell the prawn.
5
Slit the prawn in the centre and place over the cuttlefish bait and bind.
The final presentation of the cuttlefish and prawn.
At this point your presentation should look like this.
6
98
7
53ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SEA LICE BAITSBASIC
000ROCK & SURF BAIT GUIDE
Remove the head and outer shell of the Sealice.
Alternative Bait: Pierce hook from the head, through the body and out the back.
1
Pin the hook from the back of the Sealice all the way to the front.
2
Bind the bait around the hook. Add the other Sealice over the baited hook and bind.
3 4
IDEAL FOR TARGETING: Pompano, Stumpie, Bream, Grunter
54ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CRAB BAITSSTUMPIE & BRUSHER
000ROCK & SURF BAIT GUIDE
Remove the shell of the crab.
1
Divide the body of the crab in two.
2
Place the hook over the body of the one piece and bind.
3
Add the other piece over the baited hook and bind for final presentation.
4
Remove the two hind legs of the craband insert the hook through it.
Bring the hook out the other endand bind the legs around the traceline.
1 2
IDEAL FOR TARGETING: Pompano, Stumpie, Brusher, Rays
A - Stumpie
B - Brusher
55ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MUSSEL BAITSBAITING A WHOLE MUSSEL
000 ROCK & SURF BAIT GUIDE
Requirements: Drill bit.
Curve the hook through both holes - in one end and out the other.
1
Manually drill a hole through theMussel at the narrow end.
2
9
Gently open the Mussel with a filletknife making sure not to break the Mussel in two.
Slide the trace through the Musselwith the hook proudly standing out.
1 2
3
IDEAL FOR TARGETING: Pompano, Eagle Rays, Brusher
56ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MUSSEL BAITSBAITING THE MUSSEL INNER
000ROCK & SURF BAIT GUIDE
Remove the Mussel from the shelland peel out the hard outer strips.
1
Split the Mussel in half.
Bind a piece of the divided Mussel to the hook.
Bind the other piece of Mussel over the hook and existing bait.
2
Bind the hard outer strip to the baitto resemble tentacles.
Final presentation of the bait.
6
IDEAL FOR TARGETING: Pompano, Stumpies, Brusher, Rays
3 4
5
57ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CRAYFISH BAITSWITH CHOKKA
000ROCK & SURF BAIT GUIDE
Requirements: Crayfish, toothpick,foam and hook.
1
Cut the inner shell of the Crayfish.
2
Break off the shell.
3
Remove the bait from the shell.
4
Cut the bait down the middle. Two pieces of Crayfish Bait, howeverwe only require one.
5 6
IDEAL FOR TARGETING: Kingfish, Pompano, Stumpies, Sharks
58ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CRAYFISH BAITSWITH CHOKKA
000 ROCK & SURF BAIT GUIDE
Cut a piece of Chokka and preparethe hook for baiting.
7
Tenderize the Chokka.
8
Bind the Chokka over the hook.
9
Bind the Crayfish over Chokka.
10
Add glitter to the bait. Final presentation of the bait.
11 12
IDEAL FOR TARGETING: Kingfish, Pompano, Stumpies, Sharks
59ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CRAYFISH BAITSBLOB BAIT
000ROCK & SURF BAIT GUIDE
Start by making a wishbone trace.
1
Gently tenderize the Crayfish by running the knife over it.
2
Bind the softened piece of Crayfish over the hook.
3
Add some blue glitter and repeat thetenderizing process with another piece of bait.
4
Bind this piece over the bait. Final presentation of the bait.
5 6
IDEAL FOR TARGETING: Kingfish, Kob, Rockcod, Rays
60ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CRAYFISH BAITSWITH CAMO WORM
000ROCK & SURF BAIT GUIDE
Requirements: Berkley Camo Sandworm, Crayfish and Hook.
1
Cut off a piece of worm.
2
Pin the hook through the worm.
3
Pierce the Crayfish over the worm.
4
Fold over and bind. Final presentation of the bait.
5 6
IDEAL FOR TARGETING: Rockcod, Kob, Stumpies, Rays
61ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
RED BAITSRED BAIT
000 ROCK & SURF BAIT GUIDE
Requirements: A piece of Red Bait and a trace.
1
Split the bait in half. Bind a piece of bait around the hook.
Cut a piece of bait down the middle.
2
4
9
Pierce the hook through the piece ofbait.
Wrap around the hook and bind for final presentation.
5 6
3
62ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
BONITO BAITSSLIDE BAIT
000ROCK & SURF BAIT GUIDE
Cut off the tail of the Bonito.
1
Cut off all other fins from the bait.
2
Using a knife, slice fine grooves overthe head of the bait.
3
Fillet the Bonito from the tail end.
4
Pierce the hook from the lower jaw and bring out through the middle of the nose.
Insert the second hook from the throat and bring out as above.
5 6
63ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
BONITO BAITSSLIDE BAIT
000 ROCK & SURF BAIT GUIDE
The eye of the second hook should sit into the bait.
7
Firmly pull on the trace wire to have both hooks position itself properly.
8
Pull out the spine of the Bonito.
9
Break off the spine completely.
10
Final presentation of the bait. Add a cable tie over the nose for extrastrength around the hook.
11 12
64ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
BONITO BAITSTHROW BAIT
000ROCK & SURF BAIT GUIDE
Remove the tail and fillet both endsof the Bonito.
1
Pierce the hook from the lower jaw and bring it out through the middle of the nose.
2
Insert the second hook from the throat.
3
Bring the second hook all the way out.
4
Firmly pull on the trace wire to alignboth hooks.
Cut the head of the Bonito in a 45 degree angle.
5 6
65ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
BONITO BAITSTHROW BAIT
000ROCK & SURF BAIT GUIDE
Completely remove the head from thebody.
7
Fillet the body of the Bonito along the spine from the tail to approximatelymidway of the body.
8
Cut off a filleted piece.
9
A filleted piece of Bonito.
10
Repeat steps 8 and 9 on the other side of the bait.
Cut grooves over the bait to allow the cotton to sit better into the bait.
11 12
66ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
BONITO BAITSTHROW BAIT
000 ROCK & SURF BAIT GUIDE
Place the first piece over the head of the Bonito.
13
Thoroughly bind the fillet over the head of the Bonito.
14
Bind the second piece over the bait.
15
Final presentation of the throw bait.
16
Alternative view of the bait. Alternative view of the bait.
17 18
67ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
BROWN SKATE BAITSRED EYE BAIT
000ROCK & SURF BAIT GUIDE
Requirements: Red Eye Sardine, hookand toothpick.
1
Remove the tail of the bait.
2
Cut the bait in a 45 degree angle.
3
Cut the tail end of the bait into twopieces as above.
4
Pierce the hook through (A) from back to front and insert the toothpick through the eye of the hook.
Bisect the head and abdomen of the bait. This forms piece C.
5 6
68ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
BROWN SKATE BAITSRED EYE BAIT
000 ROCK & SURF BAIT GUIDE
Slice fine grooves into piece B.
7
Tenderize piece C by slicing fine grooves into it.
8
Pierce piece C through the hook, over piece A.
9
Bind this piece over the bait.
10
On the opposite side, bind piece B. Final presenation of the bait.
11 12
69ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
HAMMER HEAD BAITSTHROW BAIT
000ROCK & SURF BAIT GUIDE
Requirements: Trace, Foam, Skirt and Chokka.
1
Cut the Chokka down the middle.
2
Remove the inside of the Chokka.
3
Keep this part of the stomach.
4
Cut off a piece of the Chokka in the shape shown above.
Hammer the bait to soften.
5 6
70ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
HAMMER HEAD BAITSTHROW BAIT
000 ROCK & SURF BAIT GUIDE
Pin the Chokka through the first hook.
7
Bind the bait along the trace up to the second hook.
8
Cut another piece of Chokka.
9
Pin this piece over the second hook.
10
Bind well over the existing piece ofbait.
Cut off the red piece of the stomach.
11 12
71ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
HAMMER HEAD BAITSTHROW BAIT
000 ROCK & SURF BAIT GUIDE
Bind this over the Chokka to resemble eyes.
13
Repeat this on the other side.
14
Add gold glitter over the bait.
Final presentation of the bait.
15
Close up of the bait.
16
17
72ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
HOUND BAITSTHROW BAIT
000ROCK & SURF BAIT GUIDE
Requirements: Throw trace, toothpick,Mackerel and a pair of scissors.
1
Cut off the fins from the Mackerel.
2
Cut off the gill from the Mackerel.
3
Cut the Mackerel from the belly to the tail.
4
Remove the body of the Mackerel completely.
Fillet the body of the Mackerel along the spine.
5 6
73ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
HOUND BAITSTHROW BAIT
000 ROCK & SURF BAIT GUIDE
Measure the trace over the bait beforeinserting the hook.
7
Pierce the first hook through the head.
8
Pierce the second hook from the nosethrough the lower jaw.
9
Insert the toothpick through the firsthook.
10
Slice fine grooves into the fillet of theMackerel.
Bind the fillet over the head of theMackerel.
11 12
74ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
HOUND BAITSTHROW BAIT
000 ROCK & SURF BAIT GUIDE
Opposite side of bait.
13
Fillet the other side of the body andremove the spine.
14
Bind the second fillet over the headof the Mackerel.
15
Final presentation of the bait.
16
Bottom view of the bait. Top view of the bait.
17 18
75ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
LESSER BAITSRED EYE BAIT
000ROCK & SURF BAIT GUIDE
Requirements: Red Eye, hook,toothpick.
1
Cut the bait in half.
2
Fillet the bait from the top along thespine.
3
Remove the spine from the Red Eye.
4
Shape the spine of the bait. Bind the shaped spine over the hook.
5 6
76ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
SAND SHARK BAITSRED EYE BAIT
000 ROCK & SURF BAIT GUIDE
Pierce the fillet through the hook.
7
Bind the fillet around the hook.
8
Cut the head section of the Red Eye.
9
Remove the head.
10
Cut fine grooves in the bait. Bind this piece over the fillets.
11 12
77ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
RAGGED TOOTH BAITSTHROW BAIT
000ROCK & SURF BAIT GUIDE
Requirements: Throw trace, Toothpick, Mackerel.
1
Fillet along the spine to the middle of the bait.
Measure the trace over the bait.
Fillet the bait from the back of the Mackerel.
2
4
Remove the spine from the bait. Bind one piece of the fillet over the head.
5 6
3
78ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
RAGGED TOOTH BAITSTHROW BAIT
000 ROCK & SURF BAIT GUIDE
Repeat step 5 with the other fillet.
7
Bring it out from the end of the bait. Insert the toothpick through the hook of eye.
Pin the hook from behind the head.
8
10
Pin the second hook through the nose and out the lower jaw.
Final presentation of the bait.
11 12
9
79ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE000 ROCK & SURF BAIT GUIDE
A BASIC LOOK AT WHERE TO PIN YOUR LIVE BAITS
1 2
3 4
65
LIVE BAITSWHERE TO PIN YOUR LIVE BAIT
80ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
CAST NETBASIC
000ROCK & SURF BAIT GUIDE
Hold the net approximately a meter apart.
1
Open up a portion of the loose net. Fold this portion over a raised elbow.
Firmly group the meter of net together.
2
4
9
3
Twist your body and open as much of the net around the lead. Prepare for cast.
The net once casted.
65
81ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MULLET BAITSLIVE BAIT 1
000ROCK & SURF BAIT GUIDE
Requirements: Mullet and a treble hook on fluorocarbon line.
1
Bring the hook out of the mouth. Final presentation of the bait.
Insert the hook through the upper jaw of the Mullet.
2
43
82ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MULLET BAITSLIVE BAIT 2
000 ROCK & SURF BAIT GUIDE ROCK & SURF BAIT GUIDE
Requirements: Mullet and two singlehooks tied back to back.
1
Pierce the hook through the top of theheard of the bait.
Alternative view of the final presentation.
Remove the scales from the bait.
2
43
83ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MULLET BAITSMULLET LIVE THROW BAIT
000ROCK & SURF BAIT GUIDE
Requirements: Mullet, Toothpick and a live throw bait trace.
1
Pierce the back hook through the Mullet insuring the hook goes underthe toothpick.
Insert the front hook under the skin of the Mullet above the pectoral fin.
Insert the toothpick into the Mulletabove the anal fin.
2
43
Secure the hook firmly under the skinof the Mullet.
Final presentation of live throw bait.
65
84ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MULLET BAITSMULLET HEAD
000 ROCK & SURF BAIT GUIDE
Requirements: Mullet and a 4/0 circlehook.
1
Cut head off the Mullet in a 45 degreeangle.
Remove the body of the bait.
Cut off the pectoral fins from the Mullet.
2
43
Insert the hook from the lower jawof the bait.
Final presentation of the Mullet Head.
65
85ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MULLET BAITSDANGLE WITH MULLET
000ROCK & SURF BAIT GUIDE
Requirements: Mullet, Dangle and a Grey Shark trace.
1
Slice the flesh off the skin. Place the Dangle into the skinned fleshand bind.
Fillet the Mullet.
2
43
Place the second piece of flesh over and bind.
Insert the hook through the eye of the dangle.
65
86ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MULLET BAITSSKINNED MULLET
000 ROCK & SURF BAIT GUIDE
Requirements: Mullet and a Grey Sharktrace.
1
Cut off the gill covers from the Mullet. Cut off the head of the Mullet.
Cut off all the fins from the Mullet.
2
43
Fillet the body of the Mullet. Fillet both sides of the body.
65
87ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MULLET BAITSSKINNED MULLET
000ROCK & SURF BAIT GUIDE
Slice the skin off the flesh.
7
Bind a piece of flesh over the Mullet head.
Bind the second piece if flesh overthe Mullet head.
A mullet head with two skinned piecesof the flesh.
8
109
Pierce the hook through the Mullet head from the lower jaw up.
Final presentation of the bait.
1211
88ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MULLET BAITSLIVE MULLET - SLIDE BAIT
000 ROCK & SURF BAIT GUIDE
Requirements: Mullet and a Grey Shark slide trace.
1
Insert the hook under the skin of the Mullet, do not penerate into the fleshof the bait.
Secure the first hook firmly under theskin.
Remove the scales from the Mullet to allow an easy insertion of the hook.
2
43
Pierce the second hook through the nose of the Mullet.
Final presentation of bait.
65
89ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MULLET BAITSMULLET BAIT FOR RAGGIES
000ROCK & SURF BAIT GUIDE
Requirements: Mullet and a Ragged Tooth Shark trace.
1
Cut the bait into half. Pierce the first hook through the headof the bait.
Remove the fins from the Mullet andscale the fish.
2
43
Turn the eye of the hook to the sidewhen bringing it through the jaw andout the head of the Mullet.
Bring the hook and nylon coated wireout of the head.
65
90ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MULLET BAITSMULLET BAIT FOR RAGGIES
000 ROCK & SURF BAIT GUIDE
Insert the hook through the top of the head.
7
Pull down the nylon coated wire. Bring the second hook down to thelower jaw of the bait.
Bring the hook all the way through.Ensure the eye of the hook sits firmlyonto the bait.
8
109
Insert the second hook through thelower jaw of the bait.
Presentation of the hooks firmly secured into the Mullet head.
1211
91ROCK AND SURF DIGITAL BAIT GUIDE
000000 SALTWATER TRACE GUIDESALTWATER TRACE GUIDE
MULLET BAITSMULLET BAIT FOR RAGGIES
000ROCK & SURF BAIT GUIDE
Fillet the body of the Mullet.
13
Cut off the belly from the bait. Bind the fillet over the head.
Presentation of fillets.
14
1615
Bind the belly over a piece of fillet. Final presentation of bait.
1817
92ROCK AND SURF DIGITAL BAIT GUIDE