www.minewolf.com
MineWolf Systems AG | Schwerzistrasse 4 | 8807 Freienbach, Switzerland | [email protected]
MineWolf Systems offers a robotic arm attachment which can be fitted to the MineWolf platforms to defeat the new generation of improvised explosive devices (IEDs) and other hazardous objects. The remote controlled, powerful and multi-purpose arm can be equipped with different front tools to accomplish various clearance and removal tasks. Suspected items or unexploded ordnance (UXO) can be excavated with a bucket or picked up with a gripper. The use of a camera system facilitates remote operations and ensures full operator safety.
Key features and benefits
Ability to clear explosive devices (IEDs, UXO) surface and subsurface
Remote controlled ensuring operator safety
Extension/reach up to 6 metres
Ability to lift objects up to 1,000 kg, maximum 500 kg at full extension
Multi-adapter for various tools (buckets, grippers, drills, vegetation cutter)
Tool change can be done without involving personnel (vario lock)
Tools can rotate 360 degrees
Quick release plate for rapid exchange of multi-purpose attachments (e.g. tiller,
flail, dozer shield, etc.)
In-built camera system with different views and zoom function
Robotic arm
Robotic arm with gripper MW240 with robotic arm
Gripperbucket removing UXO
Robotic arm with vegetation cutter
www.minewolf.com
MineWolf Systems AG | Schwerzistrasse 4 | 8807 Freienbach, Switzerland | [email protected]
Specifications robotic armReach at full extension 6,38 mDigging depth 5,00 mSwinging arc 180°Lift force, full reach, telescope in (w/o tool) 1,000 kg (10 kN)Lift force, full reach, telescope out (w/o tool) 500 kg (5 kN)Digging force, using dippers 3,080 kg (30,8 kN)Digging force, using bucket 4,120 kg (41,2 kN)Maximum swing moment 1,770 kg (17,7 kNm)Hydraulic pressure 180 barWeight without attachment 1,860 kg
Gripperbucket toolThis is a combined tool which can be used as a bucket when closed or a gripper when open. Usable on different terrain, including asphalt surface and cement up to 100 mm. Its hydraulic drive has a continuous 360° rotation and wear parts can be replaced easily.
Cutting width 500 mmAngle of aperture 80°Width of opening 650 mmClosing pressure of the shells 32 kN on the bottomClosing pressure of the shells 120 kN on the topTorsional stress of the tool 10500 NmRotation ca. 2 rotations per minuteProfile generating tooth height 790 mmWeight 250 kg
Gripperbucket open
Gripperbucket closed
© 2
014
Min
eWol
f Sys
tem
s AG
, all
right
s re
serv
ed. A
ll te
chni
cal d
ata
is s
ubje
ct to
cha
nge
with
out p
rior n
otic
e. V
2