Download pdf - revision 8/15/11 • 6740.pdf Fixture Options: DISCONTINUED · Specifications Scarab TM 6740 Die-Cast Aluminum, PAR38 Metal Halide revision 8/15/11 • 6740.pdf Housing: Die-cast,

Specifications

ScarabTM 6740Die-Cast Aluminum, PAR38 Metal Halide

revision 8/15/11 • 6740.pdf

Housing: Die-cast, low copper (<0.6% Cu) aluminum body, lamphousing and socket enclosure.Swivel: Provides horizontal rotation independent of the threadedmount. Swivel locked by J-20 stainless set screw. Die-cast, low copper (<0.6% Cu) aluminum with locking teeth andK" solid brass NPT mount. Clear anodized prior to titanatedzirconium conversion coating for added corrosion resistance.Lens Frame: Integral die-cast, low copper (<0.6% Cu) aluminumlens ring and glare shield.Lens: Tempered clear soda lime glass with silicone gasket. Flush withlens frame to promote water runoff when positioned upward.Gasketing: Silicone gaskets used throughout.Socket: Porcelain medium base.Wiring: No. 18AWM rated 105°C.Ballast: High power factor, long range ignitors, -20°F. starting,mounted on tray, 120 volt standard.Ballast Box: High temperature, compression molded featuring long-fiber fiberglass impregnated heavy wall construction. Wall separatesballast chamber from splice compartments, splice area 32 cu in.;prewired, two anti-siphon plugs to and from ballast chamber. Conduitentry; two L" NPT for through wiring, one K" NPT for remote access.Ballast Cover: Cast bronze, supplied with K" NPSM for directmount, with stainless steel set screw lock. Flat for remote mount.Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconiumconversion coating; 2500 hour salt spray test endurance rating. Standardcolors are Black (BL), Dark Bronze (DB), and Verde Green (GR).Certification: UL Listed to U.S. and Canadian safety standards forwet locations.

Approvals:Type:Job:Fixture Catalog number:

Date:Page: 1 of 7

REMOTE MOUNTDIRECT MOUNT

(1) K" NPT(2) L" NPT

7C"(187.3 mm)

5D"(142.9 mm)

6K"(165.1 mm)

10M"(261.9 mm) 9K"r.

2B"(54.0 mm)

8"(203.2 mm)

U.S. PATENT D424,731

© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695

/ /Fixture Lamp Mode Finish

ORDERING INFORMATIONFixture� 6740D Direct Mounting Mounting � 6740R Remote

Lamp Mode1

� 70PMH120 � 100PMH120 � 150PMH120� 70PMH208 � 100PMH208 � 150PMH208� 70PMH240 � 100PMH240 � 150PMH240� 70PMH277 � 100PMH277 � 150PMH277� 70PMH347 � 100PMH347 � 150PMH347

Lamp PAR38 PAR38 PAR38Socket Medium Base Medium Base Medium Base

ANSI Ballast M-98 M-90 M-102

Remote Mounting Options:

Ordered Separately from FixtureSee pages 4-7

Fixture Options:

Ordered Separately from FixtureSee pages 2-3

JBRmount shown, purchased separately.

170 PMH 120Line VoltsLamp Type:PMH = Pulse Start

Metal HalideLamp Watts

KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.

Finish

� BLBlack� DBDark Bronze� GRVerde Green

DISCONTINUED



Page: 2 of 7

Type:

Job:

Fixture OptionsOrdered Separately from Fixture


Lens AccessoriesCat. No. (See right)� No Option

HL74 - Hex Cell Louver: Provides additional brightness control.Constructed of hex cell aluminum louvers providing 45° cutoff,mounted in a circular frame, finished in baked high-heat flat black.Can be used in combination with colored lenses. Inserts behind lens into lens gasket. Cannot be used in combination with SL spread or PL prismatic lenses. Cat. No.� HL74 Hex Cell Louver

PL74 - Prismatic Lens: Softens lamp distribution and flattens beamspread. Best with flood lamps. Inserts behind lens into lens gasket.Cannot be used in combination with HL74 hex cell louver.Cat. No.� PL74 Prismatic Lens

SL74 - Spread Lens: Creates an oval beam pattern, more narrow inone beam axis. Best with spot lamps. Inserts behind lens into lens gasket.Cannot be used in combination with HL74 hex cell louver.Cat. No.� SL74 Spread Lens

DISCONTINUED



Page: 3 of 7

Type:

Job:

Fixture OptionsOrdered Separately from Fixture


5H" DIA.(144.5 mm)

6L"(171.5 mm)

5N" DIA.(141.3 mm)

8L"(222.3 mm)

32° cutoff

Spun aluminum shield with 45° cut and drain hole. Includesdie-cast, low copper (<0.6% Cu) aluminum lens ring. Theshield is rotatable 360°. Replaces standard lens ring/hood onfixture.

Spun aluminum shield with drain hole. Includes die-cast, low copper (<0.6% Cu) aluminum lens ring. Replacesstandard lens ring/hood on fixture.

Stainless steel wire screen welded to flange, and held inplace with spring clips. Screen inserts inside full glare shieldonly. All debris screens are black iridite colored.

AluminumAdjustable Glare ShieldCat. No. Finish� AGS74BL Black� AGS74DB Dark Bronze� AGS74GR Verde Green� No Option

AluminumFull Glare ShieldCat. No. Finish� FGS74BL Black� FGS74DB Dark Bronze� FGS74GR Verde Green� No Option

Debris ScreenCat. No. Finish� DS74 Black� No Option

DISCONTINUED



Page: 4 of 7

Type:

Job:

Remote Mounting OptionsOrdered Separately from Fixture


PVC fixture molded in black with K" NPT mount is corrosionfree and UV resistant. Replaces EMT, conduit connectors andweatherproof boxes. 100% shatter resistant against dentingand cracking. Angled bottom to eliminate cable congestion. 17K" post length.CAUTION: EP17 should be used with a UL Listed fixture andgrounding means (i.e., third wire) suitable for use in wetlocations.“x” = required depth of conduit per local code.NOTE: Maximum remote mounting distance for 70PMH,100PMH, and 150PMH fixtures is 50'; and 175PMH fixtureis 200'.

Landscape Light Post byEngineered Products Co.Cat. No.� EP17� No Option

17K"(444.5 mm)

3K"(88.9 mm)

1" (25.4 mm)

5"(127.0 mm)

3J" DIA.(82.6 mm)

2J"(57.2 mm)

K" NPTFixtureMount

xxRigidRigid

ConduitConduit(by others)(by others)

RigidConduit

(by others)

Die-cast, low copper (< 0.6% Cu) aluminum with K" NPSMfixture mount. Internal set screw provided for lockingposition. Two K" NPSM in bottom, 17 cu in. internal volume.Super TGIC powder coat paint over clear anodizing andtitanated zirconium conversion.Application Notes• Elevates accent lights above ground cover to prevent

foliage from blocking the light.• Elevates path lights above ground cover to achieve a

greater light throw.CAUTION: Junction box must be installed high enough toavoid contact with soil or standing water.When installed on a single “feed” conduit, provide additional24" long stablizer pipe with cap. Installation on single conduitnot recommended.

Architectural Junction BoxCat. No. Finish� JB1/BL Black� JB1/DB Dark Bronze� JB1/GR Verde Green� No Option

4L"(120.7 mm)

3" DIA.(76.2 mm)

K" NPSMFixtureMount

DISCONTINUED



Page: 5 of 7

Type:

Job:



Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for lockingposition. 18 cu. in. internal volume.JBR-2 (2) K" NPT in bottomJBR-3 (2) L" NPT in bottomJBR-21 (2) K" NPT in sides, (2) K" NPT in bottom JBR-24 (4) K" NPT in sides, (2) K" NPT in bottomAll side taps provided with plugs.25 Year Limited Warranty:Solid brass junction boxes are warranted for 25 years, fromdate of sale, against manufacturing defects and failure due tocorrosion.Application Notes• Utilizing conveniently located ballast box, fixtures can be

remote mounted.• Cast brass slowly adopts environmental “patina” adapting

itself to the landscape.• May be cast in concrete for increased stability.CAUTION: Fixture stem and swivel must not contact soil orstanding water. Provide drainage away from junction box.Lamp and ballast must be of equal wattage. Ballast box mustbe installed high enough to encourage water drainage awayfrom the housing.NOTE: Maximum remote mounting distance for 70PMH,100PMH, and 150PMH fixtures is 50'; and 175PMH fixtureis 200'.

Brass In-gradeArchitectural Junction BoxCat. No.� JBR-2� JBR-3� JBR-21� JBR-24� No Option

3"(76.2 mm)

K" (12.7 mm)

K" NPSMFixtureMount

3L" DIA.(95.3 mm)

DISCONTINUED



Page: 6 of 7

Type:

Job:



Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume.(2) K" NPT in bottom with (2) 19" long stakes.25 Year Limited Warranty:Solid brass junction boxes are warranted for 25 years, fromdate of sale, against manufacturing defects and failure dueto corrosion.Application Notes• Utilizing conveniently located ballast box, fixtures can be

remote mounted.• Cast brass slowly adopts environmental “patina” adapting

itself to the landscape.• May be cast in concrete for increased stability.CAUTION: Fixture stem and swivel must not contact soil orstanding water. Provide drainage away from junction box.Lamp and ballast must be of equal wattage. Ballast box mustbe installed high enough to encourage water drainage awayfrom the housing.NOTE: Maximum remote mounting distance for 70PMH,100PMH, and 150PMH fixtures is 50'; and 175PMH fixtureis 200'.

Brass In-grade StakedJunction BoxCat. No.� JBR30� No Option

3" O.D. by .188" wall cast, low copper (<0.6% Cu)aluminum with K" NPSM fixture mount and hand hole withflush cover. Internal set screw fixture lock accessible throughhand hole. Internal ground lug supplied with installed lead.Super TGIC powder coat paint over clear anodizing andtitanated zirconium conversion.

Stanchion MountCat. No. Finish� SM18/BL Black� SM18/DB Dark Bronze� SM18/GR Verde Green� No Option

OptionalOptionalConcreteConcrete

(by others)(by others)

RigidRigidConduitConduit(by others)(by others)

RigidConduit(by others)

6" Min. (152.4 mm)

12" Max. (304.8 mm)18"

(457.2 mm)

K" NPSMFixture Mount

3" DIA.(76.2 mm)

OptionalConcrete

(by others)

18D"(473.1 mm)

19C"(492.1 mm)

3K"(88.9 mm)

3L" DIA.(95.3 mm)

1" (25.4 mm)

K" NPSMFixture Mount

DISCONTINUED



Page: 7 of 7

Type:

Job:



Cast, low copper (<0.6% Cu) aluminum with K" NPSMfixture mount. Internal set screw provided for lockingposition. 5 cu in. internal volume. Super TGIC powder coatpaint over clear anodizing and titanated zirconiumconversion.Application Notes• Utilizing conveniently located ballast box, fixtures can be

surface mounted.CAUTION: Lamp and ballast must be of equal wattage.Ballast box must be installed high enough to encourage waterdrainage away from the housing.NOTE: Maximum remote mounting distance for 70PMH,100PMH, and 150PMH fixtures is 50'; and 175PMH fixtureis 200'.

Surface MountCat. No. Finish� J-27N/BL Black� J-27N/DB Dark Bronze� J-27N/GR Verde Green� No Option

2F" (55.6 mm)

K" NPSMFixtureMount

4K"(114.3 mm)

1L"(44.5 mm)

DISCONTINUED