COLOR STANDARDS
Light Blue:CMYK: 60, 7, 0, 0PMS: 2915 (This is the closest match to the CMYK colors)
Dark Blue:CMYK: 100,100,30,20PMS: 2757 (This is the closest match to the CMYK colors)
GreyCMYK: 35,15,10,30PMS: 7544 (This is the closest match to the CMYK colors)
3rd BlueCMYK: 85,45,15,15PMS: XXXX (This is the closest match to the CMYK colors)
SPOT COLORS
COMPLETE METAL ROOFING SOLUTIONS
SER
VIN
G ROOFERS FOR OV
ER
RESOURCE CATALOGA COMPREHENSIVE GUIDE TO METAL ROOFING
Version 07-20181.888.393.0335 | www.GulfCoastSupply.com
2
TABLE OF CONTENTS
General Building Components Panels ................................................................................ 3 Skylights ........................................................................... 5 Insulation and underlayment ................................... 5Purlins .............................................................................................. 6Structural Components ........................................................... 6Doors Roll-up and walk doors ............................................... 6Accessories Screws ............................................................................... 7Clips .................................................................................................. 8Tools ................................................................................................. 8
Closures ......................................................................................... 10Boots, Paint, Sealants ............................................................. 11Trims Ridge Caps ..................................................................... 12 Eave Trims ...................................................................... 13 Gable Trims .................................................................... 14 Wall Flashings ............................................................... 15 Transitions and Valleys .............................................. 16 Corner Trims .................................................................. 17 Panel Capping Trims .................................................. 18 Other Trims ................................................................... 19 Custom Trim .............................................................. back
With over 40 color options and 8 profiles to choose from, Gulf Coast Supply offers complete metal roofing solutions. While metal roofing is crucial, it is only part of what Gulf Coast Supply offers. Gulf Coast Supply prides itself on offering start-to-finish solutions for our customers.
Gulf Coast Supply provides services such as the ProofMyRoof™ visualizer and QuickQuote™ quoting service to provide quality estimating and sales tools to your team. Expert sales staff and industry-leading turnaround times help ensure that your project is completed correctly and on-time. Gulf Coast Supply’s Contractor’s Advantage™ offers a comprehensive education program for sales/executive teams as well as hands-on training for installers. From first call to project closeout, Gulf Coast offers complete metal roofing solutions.
As the Southeast’s trusted choice for metal roofing for over two decades, Gulf Coast Supply & Manufacturing has set out to provide the best value in metal roofing through product availability, fast and reliable service, and industry expertise. We offer start-to-finish metal roofing solutions.
COLOR STANDARDS
Light Blue:CMYK: 60, 7, 0, 0PMS: 2915 (This is the closest match to the CMYK colors)
Dark Blue:CMYK: 100,100,30,20PMS: 2757 (This is the closest match to the CMYK colors)
GreyCMYK: 35,15,10,30PMS: 7544 (This is the closest match to the CMYK colors)
3rd BlueCMYK: 85,45,15,15PMS: XXXX (This is the closest match to the CMYK colors)
SPOT COLORS
3
GULF COAST PANEL PROFILES
VersaLoc™1-1/2" mechanical seam
XXXDL2415016XXXDL2415018XXXDL3215016XXXDL3215018
GulfPBR™Exposed fastener
XXXPB24XXXPB26(K)
GulfWave™Exposed fastener
XXXCO24XXXCO26(K)XXXCO29
MegaLoc™2" mechanical seam
XXXDL2420016XXXDL2420018XXXDL3220016XXXDL3220018
5V CrimpExposed fastener
XXX5V24XXX5V26(K)
GulfSeam™1-3/4" snaplock clip system
XXXGS2417514XXXGS2417516XXXGS2417518XXXGS3217514XXXGS3217516 XXXGS3217518
GulfRib™Exposed fastener
XXXTR24XXXTR26(K) XXXTR29
GulfLok™1" snaplock with screw-flange
XXXGL2410012XXXGL2410016XXXGL2610012(K)XXXGL2610016(K)XXXGL3210012XXXGL3210016
Replace "XXX" with the applicable paint color code, or with "GLM" for unpainted (steel only).All measurements are nominal and can vary according to the FL building code.
4
GREEN AMERICAN HOME PANEL PROFILES
Centura Steel ShingleCESHINGLE-XX
Great AmericanShake ShingleGASHINGLE-XX (ALUM)GSSHINGLE-XX (STEEL)
Oxford ShingleOXSHINGLE-XX
GrandTileGTTILEEM2-XX
Green American Home’s unique collection of metal roofing products offers value, protection, pleasing aesthetics and energy savings for your home. We’re committed to bringing quality and performance to every home in America with energy-saving, maintenance-free metal roofing and insulating, radiant-barriers.For full product details and related accessories, please contact your sales team at Gulf Coast.
Replace "XX" with the applicable paint color code.
COLOR STANDARDS
Light Blue:CMYK: 60, 7, 0, 0PMS: 2915 (This is the closest match to the CMYK colors)
Dark Blue:CMYK: 100,100,30,20PMS: 2757 (This is the closest match to the CMYK colors)
GreyCMYK: 35,15,10,30PMS: 7544 (This is the closest match to the CMYK colors)
3rd BlueCMYK: 85,45,15,15PMS: XXXX (This is the closest match to the CMYK colors)
SPOT COLORS
5
INSULATION AND UNDERLAYMENT
» 12’ long x 1 mm » Stocked in clear or white translucent » Additional lengths and thicknesses can be ordered
APWEAFT
APOC Weather Armor FT Fleece-Top Underlayment60 mil, fleecebacked, 2 square roll
Matches GulfPBR™ panel
Matches GulfRib™ panel
SSRCCL
Polycarbonate Ridge CapOnly clear in stock
Tyvek Protec 160 & 200 Synthetic Nailable Underlayment10 sq. roll, 30/40 yr. limited warranties, 30-year warranty, 10 square roll
TITNAIL
Grip-Rite® Button Cap Roofing Nails3000/tub
DBDF Double Foil: foil on 2 sides. 4’ X 125’DBWF White Foil: 1 side foil, one side white poly. 4’ X 125’
Reflective Foil Insulation500/sq. ft. rolls
INTASINTAW3X165
Seam TapeWhite or silver
FELT30
#30 FeltASTM D226
SL2X4LA SL2X4LMSL2X4MD
Velux® Curb Mounted Skylight2X4 Laminated, Impact, and Miami Dade in stock
SSWTR1012 matches white GulfRib™SSCTR1012 matches clear GulfRib™
SSWPB1012 matches white GulfPBR™SSCPB1012 matches clear GulfPBR™SSWPB1512 1:5mm thick matches white GulfPBR™
TYVEK160TYVEK200
APOC Weather Armor HT Peel-and-Stick Underlayment2sq. rolls
APWEAHT3
SKYLIGHTS
DST1.5
Double Stick Insulation Tape1.5x165’ roll
6
» Mini-warehouse doors » Commercial doors » Wind-loaded doors » Steel frame walk doors
LIGHT DUTY STEEL PURLINS
AVAILABLE UPON REQUESTEXTENDED LEAD TIMES MAY APPLY
Available by special order only
3070 Typical door for steel buildings
1412YP 12‘ lengths1414YP 14’ lengths, when available
Untreated #2 Southern Yellow Pine 1X4s
Base AngleROXZP822514ROXZP823014
Zee Purlins
ROXCP822014ROXCP822514
Cee Purlins
ROXES82LF14Custom Lengths Only
Eave Struts
GLZHC18GLZHC20GLZHC20L
1.5” 18 & 20 ga. Hat ChannelCut to your desired length
GLZH24L
.75” 20 & 24 ga. Hat ChannelComes in 10’ lengths. Inquire about additional lengths
STRUCTURAL COMPONENTS
ROLL-UP AND WALK DOORS
12-, 14-. and 16-gaugeGalvanized and Red Oxide
Specify whether roll-up door is for wood or steel frame. Available upon request (minimum 2-week lead time)
RUDJ(WW)X(HH)(MODEL#)
COLOR STANDARDS
Light Blue:CMYK: 60, 7, 0, 0PMS: 2915 (This is the closest match to the CMYK colors)
Dark Blue:CMYK: 100,100,30,20PMS: 2757 (This is the closest match to the CMYK colors)
GreyCMYK: 35,15,10,30PMS: 7544 (This is the closest match to the CMYK colors)
3rd BlueCMYK: 85,45,15,15PMS: XXXX (This is the closest match to the CMYK colors)
SPOT COLORS
7
1/8” #43 Stainless Steel RivetsAvailable in 24ga colors and unpainted. Use with steel panels and trim.
PAIRIVET 250/bag
12-, 14-. and 16-gaugeGalvanized and Red Oxide
SCREWS
UltiMate #10-14 Screws1-1/2”, 2”,2-1/2” (5/16” head). Available in all colors and unpainted. Zinc-aluminum alloy cap (“ZAC®” style)
PAIWU 1.5”, 2000/casePAIWU1 1”, 2500/case PAIWU2 2”, 1500/casePAIWU2.5 2.5”, 1000/case
UltiMate .25” Lap Screws1/4-14 x7/8” (5/16” undercut head). Available in all colors and unpainted. Zinc-aluminum alloy cap (“ZAC®” style)
PAILAPU 2000/case
Pancake Self-Drilling ScrewsFor attaching standing seam panels and clips to steel
PCSD 5000/case
Pancake Type “A” for wood10-12 X 1”, 1½”, or 2”. For use with Combo square drive bit. Some stainless use square drive. Use with standing seam panels.
PCWGL 5000/casePCWCLIP 5000/casePCWGL1.5 5000/casePCWCLIP1.5 2500/casePCWCLIP2 2000/casePCWCLIP3 2000/casePCWGLST 5000/casePCWCLIPST 5000/casePCWCLIP2ST 5000/case
AccuDRYve #10-151-1/2”, 2” (1/4 head). Available in all colors and unpainted
WT 1.5” 2500/caseWT2 2” 2000/caseWT2.5 2-1/2” 1500/caseWT3 3” 1000/case
EnduraFast #10-14 Screws1-1/2”, 2” (1/4” head). Available in all colors and unpainted. Full stainless fastener with zinc coating (compare to “MAC®” style with stainless head only
PAIWE 1.5”, 2000/casePAIWE1 1”, 2500/case PAIWE2 2”, 1500/casePAIWE2.5 2.5”, 1000/case
Flat Top 1/4” Lap Screws1/4-14 x7/8” (5/16” flattop head). SMP colors only in stock
PAILA 2500/case
Flat Top #12-14 x1” Lap Screws(5/16” flattop head). SMP colors only in stock
PAISD1 2500/case
UltiMate #12-14 x 1-1/4” Self DrillerAvailable in all colors and unpainted. Zinc-aluminum alloy cap (“ZAC®” style)
PAISD1.25A 2000/casePAISD1.5A 1500/case
UltiMate #12 x 1-1/2” ScrewsAvailable in all colors and unpainted. Zinc-aluminum alloy cap (“ZAC®” style)
PAIWXU 2000/casePAIWXU2 1500/case
ZAC® is a registered trademark of the SFS Intec Group and typically describes a Zinc Aluminum Capped fastener. There are a multitude of similar fasteners which are also zinc aluminum capped, to include the UltiMate fastener line.
8
1/8” #43 Aluminum RivetsAvailable in Kynar colors and unpainted. Use with aluminum panels and trim.PAIRIVETAL
AccuDRYve™ DriversUniversal Attachment fits all three jaw chuck and impact guns. ATLAS-UA
AccuDRYve™ Universal Attachment – Bit and Tip Replacement Driver Bit Replacement
1. Use needle-nose pliers to grasp tip of driver bit and pull firmly to remove. 2. Align hex shaft of new driver bit with hex hole inside AccuDRYve™ Universal
Attachment unit, insert driver bit until notches engage unit’s internal clip ring. Note: It may be easiest to insert a screw into the hex of the driver bit to manipulate the driver bit into the clip ring.
Anti-Scuff Tip Replacement 1. Use needle-nose pliers to grasp front end of anti-scuff tip and pull firmly to
remove. 2. Place large inside diameter end of anti-scuff tip over the outside diameter of the
AccuDRYve Universal Attachment 3-prong tip and press firmly until completely installed.
3. IMPORTANT: Do not use AccuDRYver unit without the anti-scuff tip. Result will be an under-compressed fastener!
AccuDRYve Nose Piece Assembly
Driver Bit
Notches
Anti-Scuff Tip
SCREWS, TOOLS, AND CLIPS
1/4–14 x 1 ¼ Self-Drilling ScrewWithout washer. Unpainted (3/8” head)
GLMSD14-1-1/4 2500/case
Coil Nails #8x2-1/2” ring shank nails
COILNAILS
#14 ID x 1 “OD Galvanized dishWith bonded neoprene washer. For attaching skylights
WASH1
304 Stainless ScrewAvailable in most aluminum panel colors.
PAIWSS1.5A 2500/case
2½” & 3” Star DriveDeck ScrewsAlso, 2½” Combo Drive, per screw or by the case. Lifetime Warranty screw for both white and pressure treated wood
DSPG 2500/caseDSPGS 2500/caseDSPG3S 2500/caseDSPGS-CSE ~2175/caseDSPG3S-CSE ~1825/case
Scamp ScrewsStainless cap, #12. 1-1/2” and 2”. Unpainted screws in stock. Type 17 cut point. Lifetime Warranty screw
GLMSC 2500/caseGLMSC2 1500/case
#14 “Goof Screw”(5/16 head).Available unpainted in 1” and 1-1/2”. Lead times apply for painted screws
PAIGOOFW1 2500/casePAIGOOFW1.5 2000/case
COLOR STANDARDS
Light Blue:CMYK: 60, 7, 0, 0PMS: 2915 (This is the closest match to the CMYK colors)
Dark Blue:CMYK: 100,100,30,20PMS: 2757 (This is the closest match to the CMYK colors)
GreyCMYK: 35,15,10,30PMS: 7544 (This is the closest match to the CMYK colors)
3rd BlueCMYK: 85,45,15,15PMS: XXXX (This is the closest match to the CMYK colors)
SPOT COLORS
9
TOOLS AND CLIPS
Quality Drivers Midwest Tool® Snips and Bending Tools
Seaming Tools
ND1/4LSCND5/16LSC
PSD
ND1/4
ND3/8
ND5/16
Spring ClipHex Driver
Standing Seam Hemming Tool
Standard (20”)HT
Deluxe (15” and 24”)HTP24HTP15
Combo Square Drive
SBSquare Bit
Standard ¼”
3/8” Hex
5/16” Hex
MWT-Snip Right
MWT-Snip Straight
MWT-Seamer Set
MWT-Snip Left
MWT-Snip Long
T25 Star DriveSTAR
TSHDMalco® Turbo Sheer HDUse with minimum 14.4V 3/8” Drill
MWT-5” SeamerMWT-9” Seamer
MWT-15” Seamer
Rent or purchase at http://www.gulfcoastsupply.com/DI
GulfSeam™ ClipFor fastening GulfSeam™ panels
GSCU175G 250/caseGSCU175S 250/case
Mechanical Seam Floating ClipFor 2” high MegaLoc™ Panels
CSFL205G 110/caseCSFL210G 110/case
Mechanical Seam 2-Piece Butterfly ClipFor 2” MegaLoc™
CSSBG18 Galvanized 150/caseCSST200G22 Stainless 200/case CSSBS18 150/caseCSST200S22 200/case
Mechanical Seam 1-Piece ClipFor 1.5” VersaLoc™ Panels
CSFX150G-NOA 500/caseCSFX150S-NOA 500/case
10
CLOSURE SOLUTIONS
Profile Vent® Our best venting solution comes in lengths up to 50’. 2 x 50’/pkg, sold in 10’ increments
PROGL16 GulfLok™
PRO5V 5V Crimp™
PROPBR GulfPBR™
PRO GulfRib™ Panel 2 x 50’ and 2 x 25’ pkgs.
PROGS16 Gulf Seam™ PROGS18
InsideOutsideVented
InsideOutsideVented
Inside
Outside
Vented
5V Crimp™
GulfRib™
GulfPBR™
Gooseneck VentsAluminumAvailable in 4”, 6” and 10”
GNECK6 16/caseGNECK10 6/case GNECK10W 6/case
Peel and Seal®For sealing hips and ridges
» Aluminum back » 33½’ x 6-inch roll
PS6 6/case
Flex-o-vent®Universal vent material. Conforms to panel profile. Applies to trim, not panels. Self-adhering.
FOV 1-20 roll per pkg.FOV5V 1-20 roll per pkg.
Expanding FoamExpands to fill up voids. Recommended for sealing panels over valleys.
» 1’’ x 1’’ x 20’ roll » 1’’ x 1 ½ ‘’ x 15’ roll » 5V Crimp, GulfWave: expands from
¼” up to 1” » GulfRib, GulfPBR: expands from 3/8 “
up to 1½”XF120 10/caseXF5 10/case
ISC5VOSC5VVC5V
CLOSURESClosures come in panel widths.
100/case unless specified otherwise.
ISCOSCVC
ISCPBROSCPBRVCPBR
COLOR STANDARDS
Light Blue:CMYK: 60, 7, 0, 0PMS: 2915 (This is the closest match to the CMYK colors)
Dark Blue:CMYK: 100,100,30,20PMS: 2757 (This is the closest match to the CMYK colors)
GreyCMYK: 35,15,10,30PMS: 7544 (This is the closest match to the CMYK colors)
3rd BlueCMYK: 85,45,15,15PMS: XXXX (This is the closest match to the CMYK colors)
SPOT COLORS
11
Touch-up PaintMatches paint used on panels. Either 4 oz. can or 2 oz. bottle available in all colors.
» 4 oz. brush-top cans PAITUP » 2 oz. brush bottles PAITUP2K
PAITUP2S
Spray PaintNot intended for use on panels or trim. 16 oz. cans, available in all colors.PAITUPS16K
BOOTS, PAINTS,AND SEALANTS
Die-formed Ridge Cap24, 26 ga. 3’ coverage. All colors available. 1/12 pitch only.
PAIRCDF26PAIRCDF24
Butyl Sealant TapeOur most economical general purpose sealing solution
» 3/32” x ¾” x 50’ BUTYL-34 20/case » 3/32” x ½” x 45’ BUTYL-1 12/case
For polycarbonate panels BUTYL-S 32/case
» UV resistant » 1% shrinkage to 0ºF application » Very flexible » Fill up to 1” gaps » Paintable in 1-2 hours » Solvent-Free » Bonds to wet surfaces » Colors match panels » Solar Seal is a suitable substitute
Titebond®Adhesive/Sealant
PAITBCOPSS (Copper Solar Seal) 12/case
Application: Gulf PBR
Pipe Boots Gray (#3 in 10 colors) for temperatures up to 250°
» #3: ½” - 5” PAIPB3 15/case » #4: 3” - 6½” PB4 10/case » #5: 4¼” - 7½” PB5 10/case » #6: 5” - 9” PB6 10/case » #7: 6”- 11” PB7 10/case » #8: 7” - 13” PB8 5/case » #9: 10” - 19” PB9 5/case
Pipe Boots Black with square base for temperatures up to 250°
» #10: 12” - 28½” PB10
Retrofit/Electrical Boots
Gray with steel cleats
» #1: ¼”- 4½”
Gray with neoprene rivets
» #2: 4” - 9¼” » #3: 9¼” -16”
Silicone Pipe BootsGray, hi-temp (up to 450°)
» #3: ½” - 5” PBSIL3 » #4: 3” - 6½” PBSIL4 » #5: 4¼” - 7½” PBSIL5 » #6: 5” - 9” PBSIL6 » #7: 6”- 11” PBSIL7 » #8: 7” - 13” PBSIL8 » #9: 10” - 19” PBSIL9
EB1 20/caseEB2 20/case
EB2D 5/caseEB3 5/case
Available in red, dark gray, light gray, brown, dark green, light blue, dark blue, white, tan, & blackPB3: BAR, CHA, LIG, COB, DAG, HAB, COS, POW, MOT, & BLA
12
RC1Flat Ridge Cap
HS1High Side Ridge Cap
HS5High Side Ridge Cap
HS7High Side Ridge Cap
RC3, RC4Flat, NotchableRidge Cap
RC7Ridge Cap
RC116Ridge Cap
RC118Ridge Cap
RC1818” Ridge Cap
RC2Standard Ridge Cap
RC2Custom Ridge Cap
Application: Exposed fastener
Application: GulfRib™ Application: GulfPBR™ Application: GulfLok™
Application: RC3 for GulfRib™RC4 for 5V Crimp™
Application: Standing seam
Application: Standing seam
Application: Standing seam
Application: Exposed fastener
Application: Exposed fastener
Application: Exposed fastener
» a: 7 RC14 » a: 8 RC16 » a: 9 RC18
» a: 10 RC20 » a: 11 RC22 » a: 12 RC24
8” 9”
RIDGE CAPS PAI___26(K)PAI___24PAI___32
COLOR STANDARDS
Light Blue:CMYK: 60, 7, 0, 0PMS: 2915 (This is the closest match to the CMYK colors)
Dark Blue:CMYK: 100,100,30,20PMS: 2757 (This is the closest match to the CMYK colors)
GreyCMYK: 35,15,10,30PMS: 7544 (This is the closest match to the CMYK colors)
3rd BlueCMYK: 85,45,15,15PMS: XXXX (This is the closest match to the CMYK colors)
SPOT COLORS
13
RIDGE CAPS EAVE TRIMS PAI___26(K)PAI___24PAI___32
ED3B90° Eave Drip
ED1FHA-style Eave Drip
ED2Retrofit Eave Drip
ED390° or specify pitch
ED8Eave Drip
FA4, FA5, FA6Fascia
ED42 x 2 Eave Drip
ED7Extended Eave Drip
Application: All profiles over battens
Application: Exposed fastener or shingles Matches GR1 Mini-Rake Application: All profiles
Application: Standing seam (use with PS)
Application: All profiles
Typical dimension a: » FA4 4½” » FA5 5½” » FA6 6½”
Application: All profiles Application: Standing seam
ED7LExtended Eave Dripwith 3"
�
�"
Application: Standing seam
14
Application: GulfRib™ Application: GulfPBR™ Application: 5V CrimpUse with ED3 or ED1
EF5Gable Rake
EF11Gable Rake
EF15Gable Rake
EF1Residential Gable Rake
EF4Residential Gable Rake
GR2Large Rake and Corner
GR6Rake and Corner
SWEFSouthwest FL Rake
GR1Mini-Rake and Corner
EF7Gable Rake
EF9Gable Rake
Application: GulfPBR™
Application: MegaLoc™ Application: VersaLoc™ Application: GulfRib™
Application: GulfLok™ Application: GulfSeam™
Application: GulfRib™ Application: GulfRib™ over battens Application: 5V Crimp
GABLE TRIMS
EF1BResidential Gable Rake
4” 3½”
PAI___26(K)PAI___24PAI___32
COLOR STANDARDS
Light Blue:CMYK: 60, 7, 0, 0PMS: 2915 (This is the closest match to the CMYK colors)
Dark Blue:CMYK: 100,100,30,20PMS: 2757 (This is the closest match to the CMYK colors)
GreyCMYK: 35,15,10,30PMS: 7544 (This is the closest match to the CMYK colors)
3rd BlueCMYK: 85,45,15,15PMS: XXXX (This is the closest match to the CMYK colors)
SPOT COLORS
15
CF1Counterflashing
EW1Stepped End-wall
Application: All profiles Application: Exposed fastener
EW2Flat Hemmed End-Wall
Application: Exposed fastener
EW4Notchable Endwall
Application: 5V Crimp
SW4Sidewall Flashing
Application: 5V Crimp
SW7Sidewall Flashing
Application: Standing seam
RG1Reglet
SS1Stucco Stop
EW7Open-Hemmed End-Wall
Application: Standing seam
SW1Sidewall Flashing
Application: GulfRib™
GABLE TRIMS WALL FLASHINGS
Add a Kerf Flange or Caulk Edge to any SW or EW
SW5Sidewall Flashing
Application: GulfPBR™
PAI___26(K)PAI___24PAI___32
Application: All profiles Application: All profiles
16
TF1Transition Flashing
Application: Exposed fastener
TF7Transition Flashing
Application: Standing seam
GF7Gambrel Flashing
GF1 Application: Exposed fastenerGF7 Application: Standing seam
PV1Preformed Valley
Application: All profiles
PV2Preformed Hemmed Valley
Application: All profiles
FG1Flying GableFlashing
Application: GulfRib™
FG7Flying GableFlashing
Application: Standing seam
CH1Chimney Flashing
Application: All profiles
TF4Notchable TransitionFlashing
Application: All profiles
TRANSITIONS & VALLEYS PAI___26(K)PAI___24PAI___32
COLOR STANDARDS
Light Blue:CMYK: 60, 7, 0, 0PMS: 2915 (This is the closest match to the CMYK colors)
Dark Blue:CMYK: 100,100,30,20PMS: 2757 (This is the closest match to the CMYK colors)
GreyCMYK: 35,15,10,30PMS: 7544 (This is the closest match to the CMYK colors)
3rd BlueCMYK: 85,45,15,15PMS: XXXX (This is the closest match to the CMYK colors)
SPOT COLORS
17
IS2Inside Corner
IS6Inside Corner
PC5Post Cover
Application: GulfRib™ Application: GulfRib™
GR1Mini-Rake and Corner
Application: GulfRib™
GR2Large Rake and Corner
Application: GulfRib™
GR2Large Rake and Corner
Application: GulfRib™
GR5Rake and Corner
GR6Rake and Corner
GR4Rake and Corner
Application: 5V Crimp
CORNER TRIMS PAI___26(K)PAI___24PAI___32
Application: GulfPBR™ Application: GulfPBR™
18
BD1Base Drip
BD5Base Drip
Application: GulfRib™ Application: GulfPBR™
DA1Double-Angle Flashing
Application: GulfRib™
DA5Double-Angle Flashing
Application: GulfPBR™
DC1Drip Cap
Application: GulfRib™
DC5Drip Cap
Application: GulfPBR™
JC1J-Channel
JC4J-Channel
JC5J-Channel
Application: GulfRib™ Application: 5V Crimp Application: GulfPBR™
PANEL CAPPING TRIMS PAI___26(K)PAI___24PAI___32
COLOR STANDARDS
Light Blue:CMYK: 60, 7, 0, 0PMS: 2915 (This is the closest match to the CMYK colors)
Dark Blue:CMYK: 100,100,30,20PMS: 2757 (This is the closest match to the CMYK colors)
GreyCMYK: 35,15,10,30PMS: 7544 (This is the closest match to the CMYK colors)
3rd BlueCMYK: 85,45,15,15PMS: XXXX (This is the closest match to the CMYK colors)
SPOT COLORS
19
Application: GulfLok™
EC1Eave Cleat
PSPanel Starter
LF4L-flashing
LF5L-flashing
GC7Gable Cleat
PC1Post Cover
Other Gable Cleats
LF6L-flashing
Z-Flashings
OTHER TRIMS PAI___26(K)PAI___24PAI___32
» Z-Flashing GulfLok™ a: 7/8" ZF7 » Z-Flashing GulfSeam™ a: 13/4" ZF9 » Z-Flashing MegaLoc™ a: 2" ZF11 » Z-Flashing VersaLoc™ a: 1½" ZF15
GulfLok™
» GulfSeam a: 33/4" GC9 » MegaLoc a: 4" GC11 » 1½" Rib Panels a: 3¼" GC15
Gulf Coast can manufacture an almost endless array of custom trim shapes to include gutters, coping caps and edge metal. Please provide a detailed drawing of the requested items using the form below. Contact your sales representative for more information or if you would like to verify that a shape can be produced.
ALL STANDARD AND CUSTOM TRIMS CAN BE FABRICATED IN 20' LENGTHS
COLOR STANDARDS
Light Blue:CMYK: 60, 7, 0, 0PMS: 2915 (This is the closest match to the CMYK colors)
Dark Blue:CMYK: 100,100,30,20PMS: 2757 (This is the closest match to the CMYK colors)
GreyCMYK: 35,15,10,30PMS: 7544 (This is the closest match to the CMYK colors)
3rd BlueCMYK: 85,45,15,15PMS: XXXX (This is the closest match to the CMYK colors)
SPOT COLORS
1.888.393.0335 | www.GulfCoastSupply.com