UNIT- II
Reference frame theory
16 November 2012 1PRB/Dept.of EEE/SCE
INTRODUCTION
Generally, the machine model can be described by differential equations withtime varying mutual inductances,
For example
( for a synchronous machine) (for a induction machine)but such a model tends to be very complex under dynamic analysis due tothe following reasons
(1) electric circuit in relative motion(2) electric circuits with varying magnetic reluctance
So that, Several change of variables are used to reduce the complexity ofthese differential equations.
16 November 2012 2PRB/Dept.of EEE/SCE
TRANSFORMATION
The process of replacing one set of variables by another related set of variablesis called transformation. In the study of power systems and electrical machine
analysis, mathematical transformations are often used to decouple variables, tofacilitate the solution of difficult equations with time-varying coefficients, or torefer all variables to a common reference frame.
Evolution of transformation technique
R. H. Park - Transformation – 1920 ( for a synchronous machine)
He transformed a change of variables (voltages ,currents and flux linkages)associated with the stator windings of a synchronous machine to a variablesassociated with fictious windings rotating with the rotor at synchronousspeed.
(The stator variables are transformed to a synchronously rotating referenceframe fixed in the rotor)
16 November 2012 3PRB/Dept.of EEE/SCE
H. C. Stanley - Transformation – 1930 (for a induction machine)
He transformed a change of variables associated with the rotor windings(rotorvariables) of a induction machine to a variables associated with fictiousstationary windings (stationary reference frame) fixed in the stator
G. Kron - Transformation (for a induction machine)
He transformed a change of variables associated with both stator and rotorwindings of a symmetrical induction machine to a variable associated withreference frame rotating in synchronism with the rotating magnetic field. Thisreference frame is commonly referred to as the synchronously rotatingreference frame.
D. S . Brereton -Transformation ( for a induction machine)
He proposed a change of variables associated with the stator windings of ainduction machine to a variables associated with the reference frame fixed inthe rotor.
16 November 2012 4PRB/Dept.of EEE/SCE
Krause and Thomas- Transformation (after 1965)
Both were shown that time varying inductances can be eliminated by referringthe stator and rotor variables to a common reference frame which may rotate atany speed. This common reference frame is also called arbitrary referenceframe.
E. Clarke - Transformation
He transformed a change of variables associated with the stationary circuits to a variables associated with stationary reference frame. The stationary two-phase variables of Clarke’s transformation are denoted as α and β. (Both are orthogonal).
16 November 2012 5PRB/Dept.of EEE/SCE
Advantages of reference frame transformation
1. The number of voltage equations are reduced.2. The time – varying voltage equations become time – invariant
ones.3. Performance of power systems and electric machines can be
analyzed without complexities in the voltage equations.4. Transformations make it possible for control algorithms to be
implemented on the DSP5. With aid of this technique , many of the basic concepts and
interpretations of this general transformations are concisely established.
16 November 2012 6PRB/Dept.of EEE/SCE
16 November 2012 7PRB/Dept.of EEE/SCE
16 November 2012 8PRB/Dept.of EEE/SCE
16 November 2012 9PRB/Dept.of EEE/SCE
16 November 2012 10PRB/Dept.of EEE/SCE
16 November 2012 11PRB/Dept.of EEE/SCE
16 November 2012 12PRB/Dept.of EEE/SCE
16 November 2012 13PRB/Dept.of EEE/SCE
16 November 2012 14PRB/Dept.of EEE/SCE
16 November 2012 15PRB/Dept.of EEE/SCE
16 November 2012 16PRB/Dept.of EEE/SCE
16 November 2012 17PRB/Dept.of EEE/SCE
16 November 2012 18PRB/Dept.of EEE/SCE
16 November 2012 19PRB/Dept.of EEE/SCE
16 November 2012 20PRB/Dept.of EEE/SCE
16 November 2012 21PRB/Dept.of EEE/SCE
16 November 2012 22PRB/Dept.of EEE/SCE
16 November 2012 23PRB/Dept.of EEE/SCE
16 November 2012 24PRB/Dept.of EEE/SCE
16 November 2012 25PRB/Dept.of EEE/SCE
16 November 2012 26PRB/Dept.of EEE/SCE
16 November 2012 27PRB/Dept.of EEE/SCE
16 November 2012 28PRB/Dept.of EEE/SCE
16 November 2012 29PRB/Dept.of EEE/SCE
16 November 2012 30PRB/Dept.of EEE/SCE
16 November 2012 31PRB/Dept.of EEE/SCE
16 November 2012 32PRB/Dept.of EEE/SCE
16 November 2012 33PRB/Dept.of EEE/SCE
16 November 2012 34PRB/Dept.of EEE/SCE
16 November 2012 35PRB/Dept.of EEE/SCE
16 November 2012 36PRB/Dept.of EEE/SCE