Reinforced Concrete Design
as per Eurocode
Soo-hyeong Kim,
Computational Engineer, MIDAS IT
(+44) 20 7559 1391
using Midas Gen
22nd September 2016 | 10:00-11:00 AM
Gotowebinar guideline
In order to have better experience during the webinar, please check the following:
Feel free to ask any question here.
Our specialist will provide answer in
the end of webinar or by email
Control audio and sound here
You can minimize gotowebinar
menu in order to see the whole
screen
01
CONTENTS
• Introduction
• Overview of User Interface
• RC Design workflow Midas Gen
• Modelling
• Applying Load
• Design
• Design Report Generation
02
Menu Icon
(Ribbon Style)
Modelling
View Window
Works Tree 2
Status BarMessage
Window
Main Menu
Toolbars
Main Menu
View Tab
Command
Line
Named
View
Work
Toolbars
Task Pane
Work Dialogue
View Control
Toolbars
File Menu Quick Menu Register Licence Help
03
User Interface
04
Import ModelsShare models between Midas and other software through many supported file formats.
MODELLING
Above:AutoCAD .DXF file showing a 3D centreline of a first floor and supporting columns.
Right:Model after the .DXF file has been imported. Line and four-sided polygons are imported as beam and plate element.
05
Mesh GenerationUse the Auto-mesh within midas to create meshes for plane sections such as walls or slabs.
MODELLING
Above:Model before the floor slab is meshed. Beams highlighted in red define the area to be meshed.
Right:Model after the floor slab is meshed. Slab meshed using quadrilateral and triangle elements.
06
Generate StoreyApply Building Generation to duplicate stories to build your model.Use the Story function to define stories within your structure for auto-calculated storey forces (wind and static seismic loads).
APPLYING LOAD
Above:Model with multiple storey generated by the Building Generation.
Right:Automated wind load profile at various storey of the model.
07
Construction Stage AnalysisLink time-dependent material properties such as Creep/Shrinkage and Compressive Strength to selected materials to model changes with time.
APPLYING LOAD
Diagonal:Contour plot of displacement due to self weight throughout the construction stages.
Left:Plot of compressive strength with time for time-dependent material analysis.
Stage 1
Stage 2
Stage 3
Stage 4
Stage 5
08
RC DesignAdd reinforcement to beams, columns, walls and braces assisted by the Concrete Code Design for automated rebar design suggestions.Modify the rebar data as and when required.Check against the various design codes within midas database.
RC DESIGN
Above:Graphical output of design calculation and checks.Left:Window for modifying rebar data.
Left:Tabulated results for reinforced concrete design check of various structural members.
09
Midas GSDDesign custom sections using in built Midas General Section Designer (GSD) to draw, modify and design reinforced concrete sections.
RC DESIGN
Top:A plot of N-M interaction curve within midas GSD for RC section design.
Bottom:Contour plot of stress along the cross-section of a custom section in midas GSD.
Bottom right:Screen shot of midas GSD for custom section design.
10
Dynamic Report GeneratorGenerate design reports aided by Dynamics Report Generator to drag and drop figures and tables into the report.Update with a click to keep the report up-to-date with any changes.
REPORT GENERATION
Top:Contour of displacement saved as a Dynamic Report Image.
Bottom:Tabulated result of reactions at support positions saved as a Dynamic Report Table.
Bottom right:Dynamic Report Generator open within Microsoft Word with the dynamic report image and table inserted.
Check more on en.midasuser.com
Ask us directly [email protected]
Call us +44-207-559-1387
http://en.midasuser.com/
UK-Support
11