UMTSLucent UTRAN Managed ObjectDescriptionsUMTS-5.1
401-380-071R5.1Issue 0.2
May 2008
Alcatel-Lucent - ProprietaryThis document contains proprietary information of Alcatel-Lucent and
is not to be disclosed or used except in accordance with applicable agreements.
Copyright © 2008 Alcatel-LucentUnpublished and Not for Publication
All Rights Reserved
See notice on first age
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of theirrespective owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2008 Alcatel-Lucent. All Rights Reserved.
Notice
Every effort has been made to ensure that the information contained in this information product was accurate at the time of printing. However,information is subject to change.
See notice on first age
Alcatel-Lucent - ProprietarySee notice on first page
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Contents
About this information product
Purpose............................................................................................................................................................................................ ixix
Reason for reissue....................................................................................................................................................................... ixix
Intended audience........................................................................................................................................................................ ixix
How to use this information product.................................................................................................................................... xx
Conventions used.......................................................................................................................................................................... xx
Tasks ................................................................................................................................................................................................. xixi
Information product support.................................................................................................................................................. xixi
Technical support....................................................................................................................................................................... xixi
Order number................................................................................................................................................................................ xixi
How to order .............................................................................................................................................................................. xiixii
How to comment........................................................................................................................................................................ xiixii
1 SNM object descriptions
Overview ...................................................................................................................................................................................... 1-11-1
SNM information model........................................................................................................................................................ 1-31-3
ExternalGsmCell....................................................................................................................................................................... 1-51-5
ExternalRnc................................................................................................................................................................................. 1-91-9
Externals .................................................................................................................................................................................... 1-121-12
ExternalUtranCell................................................................................................................................................................... 1-131-13
ItfBGroup ................................................................................................................................................................................... 1-251-25
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
iii
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ItfBLink ...................................................................................................................................................................................... 1-261-26
ItfRLink ...................................................................................................................................................................................... 1-301-30
IubLink ....................................................................................................................................................................................... 1-331-33
IucsLink ...................................................................................................................................................................................... 1-381-38
IupsLink ..................................................................................................................................................................................... 1-431-43
IurLink ........................................................................................................................................................................................ 1-471-47
LinkProfile ................................................................................................................................................................................ 1-521-52
Msc ............................................................................................................................................................................................... 1-541-54
NodeBFunction........................................................................................................................................................................ 1-561-56
NodeBManagedElement...................................................................................................................................................... 1-601-60
OMCU ........................................................................................................................................................................................ 1-621-62
RncFunction.............................................................................................................................................................................. 1-661-66
RncManagedElement............................................................................................................................................................ 1-691-69
Rns ............................................................................................................................................................................................... 1-711-71
Sgsn.............................................................................................................................................................................................. 1-731-73
Uni ................................................................................................................................................................................................ 1-751-75
VccDetail ................................................................................................................................................................................... 1-831-83
VccQos ....................................................................................................................................................................................... 1-871-87
2 RNC object descriptions
Overview ...................................................................................................................................................................................... 2-12-1
RNC information model........................................................................................................................................................ 2-42-4
AC ................................................................................................................................................................................................... 2-72-7
ATMQOS ................................................................................................................................................................................... 2-142-14
Cabinet........................................................................................................................................................................................ 2-252-25
CellSP ......................................................................................................................................................................................... 2-272-27
CICC ............................................................................................................................................................................................ 2-302-30
CICCBPEtherPort................................................................................................................................................................... 2-342-34
Contents
...................................................................................................................................................................................................................................
iv Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
CICCProc................................................................................................................................................................................... 2-372-37
EDCH .......................................................................................................................................................................................... 2-432-43
ESC .............................................................................................................................................................................................. 2-462-46
ESCBPEtherPort..................................................................................................................................................................... 2-532-53
ESCFAEtherPort..................................................................................................................................................................... 2-562-56
ESCProc..................................................................................................................................................................................... 2-592-59
ExtAlmBox ............................................................................................................................................................................... 2-622-62
FanTray....................................................................................................................................................................................... 2-672-67
FBPShelf.................................................................................................................................................................................... 2-712-71
FddExtCell ................................................................................................................................................................................ 2-752-75
GICC ........................................................................................................................................................................................... 2-872-87
GICCBPEtherPort.................................................................................................................................................................. 2-912-91
GICCFAEtherPort.................................................................................................................................................................. 2-942-94
GICCPair ................................................................................................................................................................................... 2-972-97
GICCProc................................................................................................................................................................................ 2-1002-100
GICCSTM1OC3Port........................................................................................................................................................... 2-1062-106
GsmExtCell ............................................................................................................................................................................ 2-1092-109
HSDPA ..................................................................................................................................................................................... 2-1142-114
IntraFreqMeas........................................................................................................................................................................ 2-1202-120
IPQOS ...................................................................................................................................................................................... 2-1282-128
IuB ............................................................................................................................................................................................. 2-1322-132
IuCS ........................................................................................................................................................................................... 2-1382-138
IuPS ........................................................................................................................................................................................... 2-1462-146
IuPSSubNet............................................................................................................................................................................ 2-1532-153
IuR ............................................................................................................................................................................................. 2-1572-157
LA .............................................................................................................................................................................................. 2-1652-165
LCell ......................................................................................................................................................................................... 2-1682-168
Contents
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
v
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
LNodeB .................................................................................................................................................................................... 2-2252-225
LRNC ....................................................................................................................................................................................... 2-2312-231
OCNS ....................................................................................................................................................................................... 2-2872-287
OCNSHSDPA........................................................................................................................................................................ 2-2932-293
PeriodCriteria......................................................................................................................................................................... 2-2972-297
PG .............................................................................................................................................................................................. 2-3012-301
PRACH .................................................................................................................................................................................... 2-3042-304
PRNC ........................................................................................................................................................................................ 2-3102-310
PSU ............................................................................................................................................................................................ 2-3142-314
RA .............................................................................................................................................................................................. 2-3182-318
RFTrace.................................................................................................................................................................................... 2-3212-321
SACS ........................................................................................................................................................................................ 2-3262-326
SAPS ......................................................................................................................................................................................... 2-3292-329
SB ............................................................................................................................................................................................... 2-3322-332
SBBPEtherPort...................................................................................................................................................................... 2-3402-340
SBClan ..................................................................................................................................................................................... 2-3432-343
SBProc...................................................................................................................................................................................... 2-3462-346
SCCPCHFach........................................................................................................................................................................ 2-3492-349
SCCPCHPch.......................................................................................................................................................................... 2-3552-355
SMLC ....................................................................................................................................................................................... 2-3612-361
SpareMOC.............................................................................................................................................................................. 2-3652-365
SS7Link ................................................................................................................................................................................... 2-3672-367
SS7LinkSet............................................................................................................................................................................. 2-3712-371
SS7Stack.................................................................................................................................................................................. 2-3752-375
SS7StackInst.......................................................................................................................................................................... 2-3862-386
SuMgr ....................................................................................................................................................................................... 2-3892-389
UNIStack ................................................................................................................................................................................. 2-3932-393
Contents
...................................................................................................................................................................................................................................
vi Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
URA .......................................................................................................................................................................................... 2-3982-398
3 NodeB object descriptions
Overview ...................................................................................................................................................................................... 3-13-1
Node B information model................................................................................................................................................... 3-33-3
AlarmHub .................................................................................................................................................................................... 3-53-5
ALDController ......................................................................................................................................................................... 3-113-11
AmplifierShelf ......................................................................................................................................................................... 3-153-15
AmpShelfFan........................................................................................................................................................................... 3-163-16
Cell ............................................................................................................................................................................................... 3-183-18
CPC .............................................................................................................................................................................................. 3-223-22
CPRIPort.................................................................................................................................................................................... 3-263-26
CTU ............................................................................................................................................................................................. 3-303-30
DigitalShelf ............................................................................................................................................................................... 3-353-35
DigitalShelfFan........................................................................................................................................................................ 3-383-38
E1T1Port.................................................................................................................................................................................... 3-403-40
E3T3Port.................................................................................................................................................................................... 3-433-43
EthernetPort.............................................................................................................................................................................. 3-463-46
ExtRxAmp ................................................................................................................................................................................. 3-483-48
Filter ............................................................................................................................................................................................ 3-523-52
FilterShelf .................................................................................................................................................................................. 3-593-59
Frame........................................................................................................................................................................................... 3-603-60
GRS .............................................................................................................................................................................................. 3-613-61
IMAGroup ................................................................................................................................................................................. 3-653-65
IOU .............................................................................................................................................................................................. 3-683-68
IubInterface............................................................................................................................................................................... 3-743-74
NodeB ......................................................................................................................................................................................... 3-803-80
OCM ............................................................................................................................................................................................ 3-993-99
Contents
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
vii
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
OM ............................................................................................................................................................................................. 3-1033-103
PassthroughVCLTP............................................................................................................................................................. 3-1073-107
QoS ............................................................................................................................................................................................ 3-1103-110
Radio ......................................................................................................................................................................................... 3-1133-113
RETActuator........................................................................................................................................................................... 3-1193-119
RFHead.................................................................................................................................................................................... 3-1233-123
RxAmp ..................................................................................................................................................................................... 3-1323-132
STM1OC3Port...................................................................................................................................................................... 3-1373-137
TDU ........................................................................................................................................................................................... 3-1403-140
TxAmp ..................................................................................................................................................................................... 3-1443-144
UCU .......................................................................................................................................................................................... 3-1503-150
URC ........................................................................................................................................................................................... 3-1543-154
A Common attributes
Overview ..................................................................................................................................................................................... A-1A-1
SNM objects with common attributes............................................................................................................................. A-2A-2
RNC objects with common attributes............................................................................................................................. A-4A-4
NodeB objects with common attributes......................................................................................................................... A-6A-6
Glossary
Index
Contents
...................................................................................................................................................................................................................................
viii Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
About this information productAbout this information product
Purpose
The purpose of this information product is to provide detailed information about eachobject that is visible at the Operations and Maintenance Center for the UTRAN(OMC-U).
The detailed information consists of the following:
• Full name– An expansion of the object name
• Description– A clear description of the object
• Hierarchical location– Graphical representation of the hierarchical location of theobject
• Common attributes– A link to the common attributes table if this object hasattributes that are common to other objects
• Object constraints and supported actions– Constraints to create, modify, or deletethe object
• Attributes– The attributes that apply to the object and are available through theGUI and CLI.
Note that for each object all, or a number of these detailed descriptions can beavailable.
Reason for reissue
The contents of this manual are directly generated from the OMC-U Information modelfiles and a database containing additional information about each object and attribute.Each time that an update is made to one of these sources it may be necessary togenerate a new issue of this manual.
Intended audience
The audience for this information product includes:
• OMC-U operator
• OMC-U administrator.
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008,
Alcatel-Lucent - ProprietarySee notice on first page
ix
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
How to use this information product
This information product is intended as reference material and can be used when moreinformation is needed about an object that is visible at the OMC-U.
Conventions used
Tables throughout this chapter show attribute information under the followingheadings:
• Name– States the attribute name and between brackets the full name. This columnappears in alphabetical order, by the attribute column.
• Required– Indicates whether the attribute is required when the object is created(indicated by “yes”) or can be programmed at a later stage (indicated by “no”).Between brackets the access rights are indicated.
• Description– A description of the attribute.
• Value– Lists valid values and the default value.
Important! The following management operations are service affecting:
• Reset Required (RR)
• Lock Object (LO)
• Parent locked (PL)
• Element Locked (EL)
For each attribute the following access rights are possible:
Key Code Definition Description
RO Read Only You cannot modify theattribute values.
RO-SC Read Only - Set On Create You cannot modify theattribute values. Theattribute can only be setthrough a create objectrequest.
RW Read Write You can modify theattribute values.
RW-EL Read Write - ElementLocked
You can modify theattribute values. Theelement must be lockedbefore you can modify theattribute values.
About this information product
...................................................................................................................................................................................................................................
x Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
,
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Key Code Definition Description
RW-LO Read Write - Lock Object You can modify theattribute values. The objectmust be locked before youcan modify the attributevalues.
RW-PL Read Write - Parent locked You can modify theattribute values. The parentobject must be lockedbefore you can modify theattribute.
RW-RR Read Write - ResetRequired
You can modify theattribute vales. Attributevalue changes do not takeeffect until after a reset ofthe object.
Tasks
This information product contains reference information rather than procedures and sodoes not describe any tasks.
Information product support
To provide feedback or ask non-technical questions about this and other LucentTechnologies information products use one of the following methods:
• Use the customer comment form at: http://www.lucent-info.com/comments
• Send E-mail to: [email protected]
• By telephoneDocument support telephone numbers are:
– for the continental United States: 1 888 727 3615
– for all countries: 1 630 713 5000
Technical support
For technical support, contact your local customer support team. Reach them via theweb at https://support.lucent.com/ or the telephone number listed under the TechnicalAssistance Center menu at http://www.lucent.com/contact/.
Order number
The order number for this information product (IP) is401-382-071.
About this information product
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008,
Alcatel-Lucent - ProprietarySee notice on first page
xi
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
How to order
Website ordering
For IPs intended for customers in the North American region (NAR)
• To order Lucent Technologies information products, use the following websites orthe email, phone, and fax contacts linked from “Contact Us” on those sites:
– Documentation: http://www.lucentdocs.com
– Training: https://training.lucent.com/
For IPs intended for customers in all other regions:
• To order Lucent Technologies information products, contact your local salesrepresentative, use the following websites, or use the email, phone, and fax contactslinked from “Contact Us” on those sites:
– Documentation: http://www.lucentdocs.com/
– Training: https://training.lucent.com/
Telephone, fax or email ordering
To order Lucent Technologies information products from an order entry representativeuse one of the following:
• Within the United States, call 1-888-582-3688 or send email [email protected] (to fax an order, call 1-800-566-9568)
• Within Canada, call 1-317-322-6616 or send email to [email protected] (to faxan order, call 1-317-322-6699)
• International, call 1-317-322-6416 or send email to [email protected] (to faxan order, call 1-317-322-6699).
How to comment
To comment on this information product, go to theOnline Comment Form(http://www.lucent-info.com/comments/enus/) or e-mail your comments to theComments Hotline ([email protected]).
About this information product
...................................................................................................................................................................................................................................
xii Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
,
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
1 1SNM object descriptions
Overview...................................................................................................................................................................................................................................
Purpose
This chapter contains the descriptions of all the SNM objects.
Contents
SNM information model 1-3
ExternalGsmCell 1-5
ExternalRnc 1-9
Externals 1-12
ExternalUtranCell 1-13
ItfBGroup 1-25
ItfBLink 1-26
ItfRLink 1-30
IubLink 1-33
IucsLink 1-38
IupsLink 1-43
IurLink 1-47
LinkProfile 1-52
Msc 1-54
NodeBFunction 1-56
NodeBManagedElement 1-60
OMCU 1-62
RncFunction 1-66
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-1
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
RncManagedElement 1-69
Rns 1-71
Sgsn 1-73
Uni 1-75
VccDetail 1-83
VccQos 1-87
SNM object descriptions Overview
...................................................................................................................................................................................................................................
1-2 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SNM information model...................................................................................................................................................................................................................................
Overview
The SNM information model presents a management view of the logical resourcesacross multiple network elements within the UTRAN.
SNM information model - GUI
The following figure shows the objects of the SNM information model that are visibleon the OMC-U GUI.
SNM information model - CLI
The following figure shows the objects of the SNM information model that are visibleon the OMC-U CLI.
OMCU
Externals ItfRLink
Sgsn Msc
= Containment
Network
ItfBLink
ItfBGroup
ExternalRnc ExternalGsmCell ExternalUtranCell
SubNwUMTSOMCPS
SNM object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-3
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
b
b
= Association
= Containment
Externals
a
b
b
ExternalRnc
OMCU
Sgsn
Msc
IubLink
UtranCell
IupsLink
IurLink
RncManagedElement
RncFunction IucsLink
VccQos
ItfBLink
ItfRLink
LinkProfile
Rns
Uni
ab
VccDetail
ExternalUtranCell
ExternalGSMCell
ItfBGroup
b
NodeBManagedElement
NodeBFunction
a
a
a
= Not visible on the OMC GUI
SNM object descriptions SNM information model
...................................................................................................................................................................................................................................
1-4 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ExternalGsmCell...................................................................................................................................................................................................................................
Full name
External GSM cell
Description
This object represents an external GSM cell. This object is a proxy of a real GSM cellobject that is controlled by another Base Station Controller (BSC) object.
Hierarchical location
Hierarchical location of the ExternalGsmCell object:
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“ExternalGsmCell” (p. A-2)in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You can create, delete, and modify this object.
The following are the object constraints for deleting an ExternalGsmCell object:
• You must make sure that there are no UTRAN relations that reference theExternalGsmCell object.
Attributes
The following attributes apply to the ExternalGsmCell object and are available throughthe GUI and CLI.
Attribute/Name Required Description Value
bcc
(Base station color code)
yes (RW) The Base station Color Code(BCC) of the neighboringGSM cell.
0 through 7 step size=1
No default
OMCU
ExternalGsmCell
Externals
SNM object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-5
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
bcchFrequency
(BCCH frequency number)
yes (RW) The Absolute RadioFrequency Number (ARFN)of the neighboring GSMcell.
0 through 1023 stepsize=1
No default
bsicVerificationRequired
(Base Station Identity Codeverification required)
yes (RW) The BSIC VerificationRequired parameter defineswhether, in case of MAHO,the UE has to verify theBSIC of the GSM frequencyin order to recognize theGSM cell as valid forhandover.
true
false
Default = false
cellIdentity
(Cell identity)
yes (RW) The Cell Identity (CI) of theneighboring GSM cell.
0 through 65535 stepsize=1
No default
frequencyBand yes (RW) Indicates how the UE/RNCshould interpret theBroadcast Control Channel(BCCH) Absolute RadioFrequency Channel Number(ARFCN) of the GSMneighboring cell.
gSM_450
(Frequency band) gSM_480
gSM_850
gSM_900
gSM_900E
gSM_1800
gSM_1900
No default
lAC
(Location area code)
yes (RW) Identifies a location areawithin a PLMN.
1 through 65534 stepsize=1
No default
SNM object descriptions ExternalGsmCell
...................................................................................................................................................................................................................................
1-6 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
marketLabel
(Market label)
no (RW) Label being used to identifymarket of the FddExtCell,GsmExtCell, LCell, LNodeBand LRNC objects inplanning tools.
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
maxUlTxPwr
(Maximum uplink transmitpower)
yes (RW) The maximum amount ofpower that the UE isallowed to use on the GSMRandom Access Channel(RACH).
-50 through 33 stepsize=1
No default
mCC
(Mobile country code)
yes (RW) Identifies the country towhich a PLMN belongs.
Sequenceof 3 records,using the followingvalue(s):
0 through 9 step size=1
No default
mNC
(Mobile network code)
yes (RW) Identifies a PLMN within acountry.
Sequenceof 2 through3 records, using thefollowing value(s):
0 through 9 step size=1
No default
ncc
(Network color code)
yes (RW) The Network Color Code(NCC) of the neighboringGSM cell.
0 through 7 step size=1
No default
ndpLabel
(Network data provisioningcell label)
no (RW) Label used to identify thecell in the NDP planningtools.
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
qrxLevMin
(Quality receive levelminimum)
yes (RW) Minimum receive-qualitylevel that is needed in theneighboring GSM cell.
-115 through -25 stepsize=2
No default
SNM object descriptions ExternalGsmCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-7
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
SNM object descriptions ExternalGsmCell
...................................................................................................................................................................................................................................
1-8 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ExternalRnc...................................................................................................................................................................................................................................
Full name
External radio network controller
Description
This object represents a view of an external Radio Network Controller (RNC). This isan RNC not managed by this OMC-U.
Hierarchical location
Hierarchical location of the ExternalRnc object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following are the object constraints for deleting an ExternalRnc object:
• All communication links used by this external RNC must be removed before thisobject can be deleted.
Attributes
The following attributes apply to the ExternalRnc object and are available through theGUI and CLI.
Attribute/Name Required Description Value
associatedExternalUtran-Cells
(Associated externalUTRAN cells)
no (RO) The Distinguished Names(DNs) of the neighboringcells (externalUtranCellobjects) that are associatedwith this RNC.
Sequenceof 0 through2997 records, using thefollowing value(s):
String of characters
No default
OMCU
ExternalRnc
Externals
SNM object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-9
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
linkReferences
(Link references)
no (RW) The Distinguished Names(DNs) of the links that arerelated to this object.
Sequenceof 0 through99 records, using thefollowing value(s):
String of characters
No default
marketLabel
(Market label)
no (RW) Label being used to identifymarket of the FddExtCell,GsmExtCell, LCell, LNodeBand LRNC objects inplanning tools.
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
mcc
(Mobile country code)
yes (RW) Identifies the country towhich a PLMN belongs.
Sequenceof 3 records,using the followingvalue(s):
0 through 9 step size=1
No default
mnc
(Mobile network code)
yes (RW) Identifies a PLMN within acountry.
Sequenceof 2 through3 records, using thefollowing value(s):
0 through 9 step size=1
No default
rncId
(RNC identity)
yes (RW) The unique identifier of anRNC node within a UTRANis the RNC Identifier(RNC-Id).
0 through 4095 stepsize=1
No default
sRNSRelocationForPSAl-lowed
(SRNS relocation for PSallowed)
no (RW) This parameter is used toallow or not allow thetriggering of SRNSRelocation for the PSDomain on the SRNC,depending on whether thePRNC can accept SRNSRelocation for the PSDomain.
true
false
Default = true
SNM object descriptions ExternalRnc
...................................................................................................................................................................................................................................
1-10 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
uniReferences
(Universal network interfacereference)
no (RW) The list of DistinguishedNames (DNs) of theUniversal Network Interface(UNI) objects that arerelated to this instance.
Sequenceof 0 through99 records, using thefollowing value(s):
String of characters
No default
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
SNM object descriptions ExternalRnc
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-11
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Externals...................................................................................................................................................................................................................................
Full name
Externals
Description
This object is used to collect external objects together.
Hierarchical location
Hierarchical location of the Externals object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the Externals object and are available through theGUI and CLI.
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
OMCU
Externals
SNM object descriptions
...................................................................................................................................................................................................................................
1-12 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ExternalUtranCell...................................................................................................................................................................................................................................
Full name
External UTRAN cell
Description
This object represents a UTRAN cell. This object is a proxy of a real UTRAN cellobject that is controlled by another OMC.
Hierarchical location
Hierarchical location of the ExternalUtranCell object:
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“ExternalUtranCell” (p. A-2)in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You can create, delete, and modify this object. The ExternalUtranCell object is createdwhen a Cell object is created.
The following are the object constraints for deleting an ExternalUtranCell object:
• You must make sure that there are no UTRAN relations that reference theExternalUtranCell object.
Attributes
The following attributes apply to the ExternalUtranCell object and are availablethrough the GUI and CLI.
OMCU
ExternalUtranCell
Externals
SNM object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-13
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
associatedExternalRnc
(Associated external RNC)
yes (RO-SC) The Distinguished Names(DNs) of the associatedExternalRnc object.
String of characters
No default
borderCellToGsm
(Border cell to Gsm flag)
no (RW) Marks a cell as a border cellof the UMTS network to aGSM network.
true
false
Default = false
cId
(Cell identity)
yes (RW) The Cell Identity (C-Id) isused as a unique identifierof a logical cell (LCell) thatis controlled by the RNC.
0 through 65535 stepsize=1
No default
compressedModeInterRat
(Compressed mode forinter-RAT measurements)
no (RW) The parameter defineswhether the use of thecompressed mode is allowedin the cell for inter-RATmeasurements.
true
false
Default = true
interFreqBorderCellToFdd
(Inter frequency FDD bordercell)
no (RW) Marks a cell as a border cellto another FDD frequency.
true
false
Default = false
interFreqCompressedMode
(Compressed ModeInter-frequency)
no (RW) Enables the use ofcompressed mode forinter-frequencymeasurements per cell.
true
false
Default = true
lac
(Location area code)
yes (RW) Identifies a location areawithin a PLMN.
1 through 65535 stepsize=1
No default
marketLabel
(Market label)
no (RW) Label being used to identifymarket of the FddExtCell,GsmExtCell, LCell, LNodeBand LRNC objects inplanning tools.
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
SNM object descriptions ExternalUtranCell
...................................................................................................................................................................................................................................
1-14 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
measurementQuantityInter-RATCCO
no (RW) This parameter is used forinter-RAT Cell ChangeOrder from UTRAN to GSMfor PS connections. Itdetermines the quantity tobe used for measurements ofthe UMTS frequency.
rSCP
(Inter-RAT Cell ChangeOrder measurementquantity)
eCN0
rSCP_ECN0
Default: rSCP_ECN0
measurementQuantityIn-terRATHHO
no (RW) This parameter is used forinter-RAT hard handoverfrom UTRAN to GSM. Itdetermines the quantity tobe used for measurements ofthe UMTS frequency.
rSCP
(Inter-RAT hard handovermeasurement quantity)
eCN0
rSCP_ECN0
Default: rSCP_ECN0
ndpLabel
(Network data provisioningcell label)
no (RW) Label used to identify thecell in the NDP planningtools.
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
primaryCpichPower
(Primary CPICH power)
yes (RW) Defines the output powerlevel of the PrimaryCommon Pilot Channel(P-CPICH) physical channel.
-10.0 through 50.0 stepsize=0.1
No default
primaryScramblingCode
(Primary scrambling code)
yes (RW) The primary scramblingcode that is used for thiscell which is not controlledby the LRNC.
0 through 511 stepsize=1
No default
SNM object descriptions ExternalUtranCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-15
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
rac
(Routing area code)
yes (RW) The Routing Area Code(RAC) is used to identify arouting area within alocation area.
0 through 255 stepsize=1
No default
readSFNIndicator
(Read system frame numberindicator)
yes (RW) Indicates to the UE whetherthe UE has to decode theSystem Frame Number(SFN) of the cell.
true
false
Default = true
refPeerRncs
(Peer RNCs reference list)
no (RW) This is a list of peer RNC’swhich need knowledgeabout this cell even thoughit might not have anydefined outgoing neighbourrelations to this cell.
Sequenceof 0 through60 records, using thefollowing value(s):
Any valid string.
The maximum lengthis 24 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
sac
(Service area code)
yes (RW) The Service Area Code ispart of the Service AreaIdentifier (SAI) andidentifies a service areawithin a location area.
0 through 65535 stepsize=1
No default
uarfcnDl
(UTRA absolute radiofrequency channel numberdownlink)
yes (RW) This absolute numberrepresents the frequency thatis used in the downlinkdirection.
0 through 16383 stepsize=1
No default
uarfcnUl
(UTRA absolute radiofrequency channel numberuplink)
no (RO) This absolute numberrepresents the frequency thatis used in the uplinkdirection.
0 through 16383 stepsize=1
Default = 0
SNM object descriptions ExternalUtranCell
...................................................................................................................................................................................................................................
1-16 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
umts2GsmCCOQActCM2D
(UMTS to GSM CellChange Order activatecompressed mode)
no (RW) Defines the measurementcriteria for activation ofcompressed mode for CellChange Order from UMTSto GSM.
See“Structure ofExternalUtranCellvalues” (p. 1-19).
Default = {-111,
-16,
tIMETOTRIGGER_320}
umts2GsmCCOQDeactCM2F
(UMTS to GSM CellChange Order deactivatecompressed mode)
no (RW) Defines the measurementcriteria for deactivation ofcompressed mode for CellChange Order from UMTSto GSM.
See“Structure ofExternalUtranCellvalues” (p. 1-19).
Default = {-108,
-13,
tIMETOTRIGGER_5000}
umts2GsmCCOQTriggerDAHO
(UMTS to GSM CellChange Order trigger(DAHO))
no (RW) Defines the measurementcriteria to trigger CellChange Order from UMTSto GSM (DAHO).
See“Structure ofExternalUtranCellvalues” (p. 1-19).
Default = {-111,
-16,
tIMETOTRIGGER_320,
1.0}
umts2GsmCCOQTriggerMAHO
(UMTS to GSM CellChange Order trigger(MAHO))
no (RW) Defines the measurementcriteria to trigger CellChange Order from UMTSto GSM (MAHO).
See“Structure ofExternalUtranCellvalues” (p. 1-19).
Default = {-108,
-13,
tIMETOTRIGGER_120,
1.0}
umts2GsmQActCM2D
(UMTS to GSM activatecompressed mode)
no (RW) Contains UMTS to GSMHO measurement - UMTSquality to activatecompressed modeparameters.
See“Structure ofExternalUtranCellvalues” (p. 1-19).
Default = {-16,
-111,
tIMETOTRIGGER_320}
SNM object descriptions ExternalUtranCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-17
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
umts2GsmQDeactCM2F
(UMTS to GSM deactivatecompressed mode)
no (RW) Contains UMTS to GSMHO measurement - UMTSquality to deactivatecompressed modeparameters.
See“Structure ofExternalUtranCellvalues” (p. 1-19).
Default = {-13,
-108,
tIMETOTRIGGER_5000}
umts2GsmQTriggerDAHO
(UMTS to GSM Trigger,DAHO)
no (RW) Contains UMTS to GSMHO measurement - UMTSquality to trigger DAHO.
See“Structure ofExternalUtranCellvalues” (p. 1-19).
Default = {-16,
-111,
tIMETOTRIGGER_320,
1.0}
umts2GsmQTriggerMAHO
(UMTS to GSM Trigger,MAHO)
no (RW) Contains UMTS to GSMHO measurement - UMTSquality to trigger MAHO.
See“Structure ofExternalUtranCellvalues” (p. 1-19).
Default = {-13,
-108,
tIMETOTRIGGER_120,
1.0}
umtsFrequencyBand yes (RW) Indicates the frequency bandthat the cell supports.
bAND_I
(UMTS frequency band) bAND_II
bAND_III
bAND_IV
bAND_V
bAND_VI
bAND_IX
bAND_VIII
No default
urac
(Utran Registration AreaCode)
yes (RO-SC) Utran Registration AreaCode identifies a UtranRegistration Area
0 through 65535 stepsize=1
No default
SNM object descriptions ExternalUtranCell
...................................................................................................................................................................................................................................
1-18 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of ExternalUtranCell values
The following table describes the value format used for the ExternalUtranCell objectattribute.
Attribute Sequence of structure Values
umts2GsmCCOQActCM2DrSCPThreshold -115 through -25 step size=1
eCN0Threshold -24 through 0 step size=1
umts2GsmCCOQActCM2DtimeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
umts2GsmCCOQDeactCM2FrSCPThreshold -115 through -25 step size=1
SNM object descriptions ExternalUtranCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-19
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
eCN0Threshold -24 through 0 step size=1
umts2GsmCCOQDeactCM2FtimeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
umts2GsmCCOQTriggerDAHOrSCPThreshold -115 through -25 step size=1
eCN0Threshold -24 through 0 step size=1
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
SNM object descriptions ExternalUtranCell
...................................................................................................................................................................................................................................
1-20 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
weight 0.0 through 2.0 step size=0.1
umts2GsmCCOQTriggerMAHOrSCPThreshold -115 through -25 step size=1
eCN0Threshold -24 through 0 step size=1
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
weight 0.0 through 2.0 step size=0.1
umts2GsmQActCM2D eCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
umts2GsmQActCM2D timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
SNM object descriptions ExternalUtranCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-21
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
umts2GsmQDeactCM2F eCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
umts2GsmQDeactCM2F timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
umts2GsmQTriggerDAHOeCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
SNM object descriptions ExternalUtranCell
...................................................................................................................................................................................................................................
1-22 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
weight 0.0 through 2.0 step size=0.1
umts2GsmQTriggerMAHOeCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
SNM object descriptions ExternalUtranCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-23
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
weight 0.0 through 2.0 step size=0.1
SNM object descriptions ExternalUtranCell
...................................................................................................................................................................................................................................
1-24 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ItfBGroup...................................................................................................................................................................................................................................
Full name
Itf-B group
Description
This object exists for grouping Itf-B management communications links between NodeBs and the OMC-U. The proposed convention is that ItfBLink instances are groupedby RNS.
Hierarchical location
Hierarchical location of the ItfBGroup object:
Object constraints and supported actions
You can create, delete, and modify this object.
Attributes
The following attributes apply to the ItfBGroup object and are available through theGUI and CLI.
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
OMCU
ItfBGroup
SNM object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-25
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ItfBLink...................................................................................................................................................................................................................................
Full name
Itf-B link
Description
This object represents an Itf-B management communications interface between a NodeB and the OMC-U.
Hierarchical location
Hierarchical location of the ItfBLink object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following are the object constraints for creating an ItfBLink object:
• The Node B and OMC-U to be linked must already exist, and these ends must havedefined LAN uni(s) associated with them.
The following are the object constraints for deleting an ItfBLink object:
• You must make sure that the Itf-B link is no longer in use (the appropriateresources on the managed functions have been locked to ensure this).
Attributes
The following attributes apply to the ItfBLink object and are available through the GUIand CLI.
Attribute/Name Required Description Value
associatedFunctionId
(Associated functionidentity)
yes (RO-SC) The Distinguished Name(DN) of the function objectthat is associated with thisIu-link.
String of characters
No default
OMCU
ItfBLink
ItfBGroup
SNM object descriptions
...................................................................................................................................................................................................................................
1-26 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
connectionDirection yes (RO-SC) The connection direction ofthis link, between networkelements.
a_to_B
(Connection direction) b_to_A
notapplicable
bidirectional
No default
connectionType
(Connection type)
yes (RO-SC) Type of connection for thislink between networkelements.
Any valid string.
The maximum lengthis 10 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
endPointA
(End point A)
yes (RO-SC) Endpoint A’s NE Iu object. String of characters
No default
endPointB
(Endpoint B)
yes (RO-SC) Endpoint B’s NE Iu object. String of characters
No default
itfbVccs
(Itf-B virtual channelconnections)
yes (RO-SC) A sequence of VirtualChannel Connections(VCCs).
Sequenceof 1 records,using the followingvalue(s):
See“Structure ofItfBLink values”(p. 1-28).
Default is an emptysequence.
linkNumber
(Link number)
yes (RO-SC) This is the link number tobe used when calling theATM algorithm forallocation of VirtualChannel Identifier(VCI)/Virtual Path Identifier(VPI) values.
1 through 9999 stepsize=1
No default
SNM object descriptions ItfBLink
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-27
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
linkProfileReference
(Link profile reference)
yes (RO-SC) The Distinguished Name(DN) of the LinkProfileobject that is related to thisinstance.
String of characters
No default
operationalState no (RW) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of ItfBLink values
The following table describes the value format used for the ItfBLink object attribute.
Attribute Sequence of structure Values
itfbVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
vccQosReference String of characters
ermVpnIpNetworkInterface 0 through 2048 step size=1
bngateIpAddress String of characters
bngateIpAddressMask String of characters
anaddrIpAddress String of characters
anaddrIpAddressMask String of characters
SNM object descriptions ItfBLink
...................................................................................................................................................................................................................................
1-28 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
yiaddrIpAddress String of characters
yiaddrIpAddressMask String of characters
SNM object descriptions ItfBLink
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-29
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ItfRLink...................................................................................................................................................................................................................................
Full name
Itf-R link
Description
This object represents the Itf-R management communications interface between anRNC and the OMC-U.
Hierarchical location
Hierarchical location of the ItfRLink object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following are the object constraints for creating an ItfRLink object:
• The RNC and OMC-U to be linked must already exist, and these ends must havedefined LAN uni(s) associated with them.
The following are the object constraints for deleting an ItfRLink object:
• You must make sure that the Itf-R link is no longer in use (the appropriateresources on the managed functions have been locked to ensure this).
Attributes
The following attributes apply to the ItfRLink object and are available through the GUIand CLI.
Attribute/Name Required Description Value
associatedFunctionId
(Associated functionidentity)
yes (RO-SC) The Distinguished Name(DN) of the function objectthat is associated with thisIu-link.
String of characters
No default
connectionDirection yes (RO-SC) The connection direction ofthis link, between networkelements.
a_to_B
OMCU
ItfRLink
SNM object descriptions
...................................................................................................................................................................................................................................
1-30 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(Connection direction) b_to_A
notapplicable
bidirectional
No default
connectionType
(Connection type)
yes (RO-SC) Type of connection for thislink between networkelements.
Any valid string.
The maximum lengthis 10 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
endPointA
(End point A)
yes (RO-SC) Endpoint A’s NE Iu object. String of characters
No default
endPointB
(Endpoint B)
yes (RO-SC) Endpoint B’s NE Iu object. String of characters
No default
itfRVccs
(Itf virtual channelconnections)
yes (RO-SC) A sequence of 1..1 AAL5VCCs to carry Itf-R(XML/CORBA, FTP, telnet)IP-based managementmessages for the RNC.
Sequenceof 1 records,using the followingvalue(s):
See“Structure ofItfRLink values”(p. 1-32).
Default is an emptysequence.
linkNumber
(Link number)
yes (RO-SC) This is the link number tobe used when calling theATM algorithm forallocation of VirtualChannel Identifier(VCI)/Virtual Path Identifier(VPI) values.
1 through 9999 stepsize=1
No default
linkProfileReference
(Link profile reference)
yes (RO-SC) The Distinguished Name(DN) of the LinkProfileobject that is related to thisinstance.
String of characters
No default
operationalState no (RW) The operational state of themanaged object.
enabled
SNM object descriptions ItfRLink
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-31
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(Operational state) disabled
Default: disabled
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of ItfRLink values
The following table describes the value format used for the ItfRLink object attribute.
Attribute Sequence of structure Values
itfRVccs userLabel 0 through 100
localVPI -1 through 4095 step size=1
localVCI -1 through 65535 step size=1
localUNIReference String of characters
remoteVPI -1 through 4095 step size=1
remoteVCI -1 through 65535 step size=1
remoteUNIReference String of characters
vccQosReference String of characters
localErmVpnIpNetworkInter-face
0 through 2048 step size=1
remoteErmVpnIpNet-workInterface
0 through 2048 step size=1
SNM object descriptions ItfRLink
...................................................................................................................................................................................................................................
1-32 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IubLink...................................................................................................................................................................................................................................
Full name
Iub link
Description
This object represents the management communications link between functions residingin different physical entities, the RNC and the Node B.
Note: This object is only visible on the OMC-U CLI.
Hierarchical location
Hierarchical location of the IubLink object:
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“IubLink” (p. A-2) in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You cannot modify this object.
The following are the object constraints for creating an IubLink object:
• A pre-requisite is that the RNC and Node B to be linked must already exist, andhave defined uni(s) associated with them.
The following are the object constraints for deleting an IubLink object:
• A pre-requisite is that the Iub link is no longer in use (the appropriate resources onthe managed functions have been locked to ensure this).
OMCU
RncManagedElement
Rns
RncFunction
IubLink
SNM object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-33
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attributes
The following attributes apply to the IubLink object and are available through the GUIand CLI.
Attribute/Name Required Description Value
alcapVccs
(ALCAP virtual channelconnection)
yes (RO-SC) Lists the different attributesthat are assigned to theVirtual Channel Connections(VCC) that are used forcarring ALCAP signaling.
Sequenceof 1 through2 records, using thefollowing value(s):
See“Structure ofIubLink values”(p. 1-36).
Default is an emptysequence.
associatedFunctionId
(Associated functionidentity)
yes (RO-SC) The Distinguished Name(DN) of the function objectthat is associated with thisIu-link.
String of characters
No default
ccpNbapVccs
(Communication controlport NBAP virtual channelconnections)
yes (RO-SC) Lists the different attributesthat are assigned to theVirtual Channel Connections(VCC) that are used forcarrying the NBAP commoncontrol port signalingmessages.
Sequenceof 1 through2 records, using thefollowing value(s):
See“Structure ofIubLink values”(p. 1-36).
Default is an emptysequence.
connectionDirection yes (RO-SC) The connection direction ofthis link, between networkelements.
a_to_B
(Connection direction) b_to_A
notapplicable
bidirectional
No default
SNM object descriptions IubLink
...................................................................................................................................................................................................................................
1-34 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
connectionType
(Connection type)
yes (RO-SC) Type of connection for thislink between networkelements.
Any valid string.
The maximum lengthis 10 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
endPointA
(End point A)
yes (RO-SC) Endpoint A’s NE Iu object. String of characters
No default
endPointB
(Endpoint B)
yes (RO-SC) Endpoint B’s NE Iu object. String of characters
No default
iubAssociatedReference
(Iub associated reference)
yes (RO-SC) The Distinguished Name(DN) of the NodeBfunctionobject that is related to thisIub link.
String of characters
No default
iubContainedReference
(Iub contained reference)
yes (RO-SC) The Distinguished Name(DN) of the RncFunctionobject that is related to thisIub link.
String of characters
No default
linkNumber
(Link number)
yes (RO-SC) This is the link number tobe used when calling theATM algorithm forallocation of VirtualChannel Identifier(VCI)/Virtual Path Identifier(VPI) values.
1 through 9999 stepsize=1
No default
linkProfileReference
(Link profile reference)
yes (RO-SC) The Distinguished Name(DN) of the LinkProfileobject that is related to thisinstance.
String of characters
No default
SNM object descriptions IubLink
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-35
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
nbcpNbapVccs
(Node B control port NBAPvirtual channel connections)
yes (RO-SC) List the attributes that areused for the Virtual ChannelConnections (VCCs) thatcarry the NBAP messagesfor the Node B Control Portsignaling.
Sequenceof 1 through2 records, using thefollowing value(s):
See“Structure ofIubLink values”(p. 1-36).
Default is an emptysequence.
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
userplaneBVccs
(Userplane B virtual channelconnection)
yes (RO-SC) Lists the different attributesthat are assigned to eachVirtual Channel Connection(VCC) that is valid for thisIub link.
Sequenceof 1 through24 records, using thefollowing value(s):
See“Structure ofIubLink values”(p. 1-36).
Default is an emptysequence.
Structure of IubLink values
The following table describes the value format used for the IubLink object attribute.
Attribute Sequence of structure Values
alcapVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
SNM object descriptions IubLink
...................................................................................................................................................................................................................................
1-36 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
vccQosReference String of characters
ccpNbapVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
vccQosReference String of characters
nbcpNbapVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
vccQosReference String of characters
userplaneBVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
vccQosReference String of characters
SNM object descriptions IubLink
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-37
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IucsLink...................................................................................................................................................................................................................................
Full name
Iu-cs Link
Description
This object represents the management communications link between functions residingin different physical entities, the RNC and the External Mobile Switching Center(MSC).
Note: This object is only visible on the OMC-U CLI.
Hierarchical location
Hierarchical location of the IucsLink object:
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“IucsLink” (p. A-2) in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You cannot modify this object.
The following are the object constraints for creating an IucsLink object:
• A pre-requisite is that the two functions to be linked must already exist, and in thecase of the UTRAN, these functions must have defined uni(s) associated with them.
The following are the object constraints for deleting an IucsLink object:
• A pre-requisite is that the Iu-cs link is no longer in use (the appropriate resourceson the managed functions have been locked to ensure this).
OMCU
RncManagedElement
Rns
RncFunction
IucsLink
SNM object descriptions
...................................................................................................................................................................................................................................
1-38 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attributes
The following attributes apply to the IucsLink object and are available through theGUI and CLI.
Attribute/Name Required Description Value
associatedFunctionId
(Associated functionidentity)
yes (RO-SC) The Distinguished Name(DN) of the function objectthat is associated with thisIu-link.
String of characters
No default
connectionDirection yes (RO-SC) The connection direction ofthis link, between networkelements.
a_to_B
(Connection direction) b_to_A
notapplicable
bidirectional
No default
connectionType
(Connection type)
yes (RO-SC) Type of connection for thislink between networkelements.
Any valid string.
The maximum lengthis 10 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
endPointA
(End point A)
yes (RO-SC) Endpoint A’s NE Iu object. String of characters
No default
endPointB
(Endpoint B)
yes (RO-SC) Endpoint B’s NE Iu object. String of characters
No default
iucsContainedReference
(Iu-CS contained reference)
yes (RO-SC) The Distinguished Name(DN) of the rncFunctionobject that is related to thisIu-CS link.
String of characters
No default
SNM object descriptions IucsLink
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-39
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
linkNumber
(Link number)
yes (RO-SC) This is the link number tobe used when calling theATM algorithm forallocation of VirtualChannel Identifier(VCI)/Virtual Path Identifier(VPI) values.
1 through 9999 stepsize=1
No default
linkProfileReference
(Link profile reference)
yes (RO-SC) The Distinguished Name(DN) of the LinkProfileobject that is related to thisinstance.
String of characters
No default
mtp3bAlcapVccs
(Message transfer part 3bALCAP virtual channelconnections)
no (RO-SC) Lists the atrributes that areused for the Virtual ChannelConnections (VCCs) forSignaling System number 7(SS7) signaling linksmaking up a SS7 linksetthat carries Access LinkControl Application Protocol(ALCAP) signaling (only).
Sequenceof 0 through2 records, using thefollowing value(s):
See“Structure ofIucsLink values”(p. 1-41).
Default is an emptysequence.
mtp3bRanapVccs
(Message transfer part 3bRANAP virtual channelconnections)
no (RO-SC) Lists the atrributes that areused for the Virtual ChannelConnections (VCCs) forSignaling System number 7(SS7) signaling linksmaking up a SS7 linksetthat carries Radio AccessNetwork Application Part(RANAP) signaling (only).
Sequenceof 0 through2 records, using thefollowing value(s):
See“Structure ofIucsLink values”(p. 1-41).
Default is an emptysequence.
mtp3bVccs
(Message transfer part 3bvirtual channel connections)
no (RO-SC) List the atrributes that arefor the Virtual ChannelConnections (VCCs) forSignaling System number 7(SS7) signaling links thatmake up a SS7 linkset.
Sequenceof 0 through2 records, using thefollowing value(s):
See“Structure ofIucsLink values”(p. 1-41).
Default is an emptysequence.
SNM object descriptions IucsLink
...................................................................................................................................................................................................................................
1-40 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
userplaneCSVccs
(Userplane circuit switchedvirtual channel connections)
yes (RO-SC) Lists the different attributesthat are assigned to eachVirtual Channel Connection(VCC) that is valid for thisIu-CS link.
Sequenceof 1 through40 records, using thefollowing value(s):
See“Structure ofIucsLink values”(p. 1-41).
Default is an emptysequence.
Structure of IucsLink values
The following table describes the value format used for the IucsLink object attribute.
Attribute Sequence of structure Values
mtp3bAlcapVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
vccQosReference String of characters
mtp3bRanapVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
SNM object descriptions IucsLink
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-41
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
vccQosReference String of characters
mtp3bVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
vccQosReference String of characters
userplaneCSVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
vccQosReference String of characters
SNM object descriptions IucsLink
...................................................................................................................................................................................................................................
1-42 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IupsLink...................................................................................................................................................................................................................................
Full name
Iu-ps link
Description
This object represents the management communications link between functions residingin different physical entities, the RNC object and the External Serving GPRS SupportNode (SGSN).
Note: This object is only visible on the OMC-U CLI.
Hierarchical location
Hierarchical location of the IupsLink object:
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“IupsLink” (p. A-3) in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You cannot modify this object.
The following are the object constraints for creating an IupsLink object:
• A pre-requisite is that the two functions to be linked must already exist, and in thecase of the UTRAN, these functions must have defined uni(s) associated with them.
The following are the object constraints for deleting an IupsLink object:
• A pre-requisite is that the Iu-ps link is no longer in use (the appropriate resourceson the managed functions have been locked to ensure this).
OMCU
RncManagedElement
Rns
RncFunction
IupsLink
SNM object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-43
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attributes
The following attributes apply to the IupsLink object and are available through theGUI and CLI.
Attribute/Name Required Description Value
associatedFunctionId
(Associated functionidentity)
yes (RO-SC) The Distinguished Name(DN) of the function objectthat is associated with thisIu-link.
String of characters
No default
connectionDirection yes (RO-SC) The connection direction ofthis link, between networkelements.
a_to_B
(Connection direction) b_to_A
notapplicable
bidirectional
No default
connectionType
(Connection type)
yes (RO-SC) Type of connection for thislink between networkelements.
Any valid string.
The maximum lengthis 10 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
endPointA
(End point A)
yes (RO-SC) Endpoint A’s NE Iu object. String of characters
No default
endPointB
(Endpoint B)
yes (RO-SC) Endpoint B’s NE Iu object. String of characters
No default
iupsContainedReference
(Iu-PS contained reference)
yes (RO-SC) The Distinguished Name(DN) of the rncFunctionobject that is related to thisIu-PS link.
String of characters
No default
SNM object descriptions IupsLink
...................................................................................................................................................................................................................................
1-44 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
linkNumber
(Link number)
yes (RO-SC) This is the link number tobe used when calling theATM algorithm forallocation of VirtualChannel Identifier(VCI)/Virtual Path Identifier(VPI) values.
1 through 9999 stepsize=1
No default
linkProfileReference
(Link profile reference)
yes (RO-SC) The Distinguished Name(DN) of the LinkProfileobject that is related to thisinstance.
String of characters
No default
mtp3bVccs
(Message transfer part 3bvirtual channel connections)
yes (RO-SC) List the atrributes that arefor the Virtual ChannelConnections (VCCs) forSignaling System number 7(SS7) signaling links thatmake up a SS7 linkset.
Sequenceof 0 through2 records, using thefollowing value(s):
See“Structure ofIupsLink values”(p. 1-45).
Default is an emptysequence.
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
userplanePSVccs
(Userplane packet switchedvirtual channel connections)
yes (RO-SC) Lists the different attributesthat are assigned to eachVirtual Channel Connection(VCC) that is valid for thisIu-PS link.
Sequenceof 1 through40 records, using thefollowing value(s):
See“Structure ofIupsLink values”(p. 1-45).
Default is an emptysequence.
Structure of IupsLink values
The following table describes the value format used for the IupsLink object attribute.
SNM object descriptions IupsLink
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-45
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
mtp3bVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
vccQosReference String of characters
userplanePSVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
vccQosReference String of characters
SNM object descriptions IupsLink
...................................................................................................................................................................................................................................
1-46 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IurLink...................................................................................................................................................................................................................................
Full name
Iur link
Description
This object represents the communication link between two Rncfunction objects orbetween an RncFunction object and an ExternalRnc object.
Note: This object is only visible on the OMC-U CLI.
Hierarchical location
Hierarchical location of the IurLink object:
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“IurLink” (p. A-3) in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You cannot modify this object.
The following are the object constraints for creating an IurLink object:
• A pre-requisite is that the two functions to be linked must already exist, and in thecase of the UTRAN, these functions must have defined uni(s) associated with them.
OMCU
RncManagedElement
Rns
RncFunction
IurLink
Externals
ExternalRnc
IurLink
SNM object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-47
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
The following are the object constraints for deleting an IurLink object:
• A pre-requisite is that the Iur link is no longer in use (the appropriate resources onthe managed functions have been locked to ensure this).
Attributes
The following attributes apply to the IurLink object and are available through the GUIand CLI.
Attribute/Name Required Description Value
associatedFunctionId
(Associated functionidentity)
yes (RO-SC) The Distinguished Name(DN) of the function objectthat is associated with thisIu-link.
String of characters
No default
associatedLinkNumber
(Associated Link number)
yes (RO-SC) The Associated Link numberto be used when calling theATM Algorithm forallocation of VCI/VPIvalues at the Peer RNC endof an Iur Link.
11 through 20 stepsize=1
No default
connectionDirection yes (RO-SC) The connection direction ofthis link, between networkelements.
a_to_B
(Connection direction) b_to_A
notapplicable
bidirectional
No default
connectionType
(Connection type)
yes (RO-SC) Type of connection for thislink between networkelements.
Any valid string.
The maximum lengthis 10 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
containedLinkNumber
(Contained Link number)
yes (RO-SC) The Contained Link numberto be used when calling theATM Algorithm forallocation of VCI/VPIvalues at the Owner RNCend of an Iur Link.
1 through 10 stepsize=1
No default
SNM object descriptions IurLink
...................................................................................................................................................................................................................................
1-48 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
endPointA
(End point A)
yes (RO-SC) Endpoint A’s NE Iu object. String of characters
No default
endPointB
(Endpoint B)
yes (RO-SC) Endpoint B’s NE Iu object. String of characters
No default
iurAssociatedReference
(Iur associated reference)
yes (RO-SC) The Distinguished Name(DN) of the extRncFunctionobject that is related to thisIur link.
String of characters
No default
iurContainedReference
(Iur contained reference)
yes (RO-SC) The Distinguished Name(DN) of the RncFunctionobject that is related to thisIur link.
String of characters
No default
linkProfileReference
(Link profile reference)
yes (RO-SC) The Distinguished Name(DN) of the LinkProfileobject that is related to thisinstance.
String of characters
No default
mtp3bAlcapVccs
(Message transfer part 3bALCAP virtual channelconnections)
no (RO-SC) Lists the atrributes that areused for the Virtual ChannelConnections (VCCs) forSignaling System number 7(SS7) signaling linksmaking up a SS7 linksetthat carries Access LinkControl Application Protocol(ALCAP) signaling (only).
Sequenceof 0 through2 records, using thefollowing value(s):
See“Structure ofIurLink values”(p. 1-50).
Default is an emptysequence.
mtp3bRnsapVccs
(Message transfer part 3bRNSAP virtual channelconnections)
no (RO-SC) Lists the atrributes that areused for the Virtual ChannelConnections (VCCs) forSignaling System number 7(SS7) signaling linksmaking up a SS7 linksetthat carries Radio NetworkSubsystem Application Part(RNSAP) signaling (only).
Sequenceof 0 through2 records, using thefollowing value(s):
See“Structure ofIurLink values”(p. 1-50).
Default is an emptysequence.
SNM object descriptions IurLink
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-49
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
mtp3bVccs
(Message transfer part 3bvirtual channel connections)
no (RO-SC) List the atrributes that arefor the Virtual ChannelConnections (VCCs) forSignaling System number 7(SS7) signaling links thatmake up a SS7 linkset.
Sequenceof 0 through2 records, using thefollowing value(s):
See“Structure ofIurLink values”(p. 1-50).
Default is an emptysequence.
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
userplaneRVccs
(Userplane R virtual channelconnections)
yes (RO-SC) Lists the different attributesthat are assigned to eachVirtual Channel Connection(VCC) that is valid for thisIur link.
Sequenceof 1 through40 records, using thefollowing value(s):
See“Structure ofIurLink values”(p. 1-50).
Default is an emptysequence.
Structure of IurLink values
The following table describes the value format used for the IurLink object attribute.
Attribute Sequence of structure Values
mtp3bAlcapVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
SNM object descriptions IurLink
...................................................................................................................................................................................................................................
1-50 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
vccQosReference String of characters
mtp3bRnsapVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
vccQosReference String of characters
mtp3bVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
vccQosReference String of characters
userplaneRVccs userLabel 0 through 100
localVPI 0 through 4095 step size=1
localVCI 32 through 65535 step size=1
localUNIReference String of characters
remoteVPI 0 through 4095 step size=1
remoteVCI 32 through 65535 step size=1
remoteUNIReference String of characters
vccQosReference String of characters
SNM object descriptions IurLink
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-51
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
LinkProfile...................................................................................................................................................................................................................................
Full name
Link profile
Description
This object defines a template that is referenced when creating object links. TheLinkProfile object is used for all types of links and must exist before any link usingthe LinkProfile object is created.
Note: This object is only visible on the OMC-U CLI.
Hierarchical location
Hierarchical location of the LinkProfile object:
Object constraints and supported actions
You cannot modify this object. The LinkProfile object is created as part of OMC-Ucommissioning.
The following are the object constraints for deleting a LinkProfile object:
• You must make sure that no objects reference the LinkProfile object.
Attributes
The following attributes apply to the LinkProfile object and are available through theGUI and CLI.
Attribute/Name Required Description Value
assocFuncType yes (RO-SC) The class of the associatedfunction that is applicablefor this link.
rncFunction
(Associated function type) nodeBFunction
itfbGroup
msc
sgsn
OMCU
LinkProfile
SNM object descriptions
...................................................................................................................................................................................................................................
1-52 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
externalrnc
omcu
No default
contFuncType yes (RO-SC) The class of the functionthat controls this link.
rncFunction
(Controling function type) nodeBFunction
itfbGroup
msc
sgsn
externalrnc
omcu
No default
linkReferences
(Link references)
no (RW) The Distinguished Names(DNs) of the links that arerelated to this object.
Sequenceof 0 through99 records, using thefollowing value(s):
String of characters
No default
linkType yes (RO-SC) The type of link for whichthe profile is created.
iubLink
(Link type) iurLink
iucsLink
iupsLink
initCcmsLink
itfRLink
itfBLink
No default
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
SNM object descriptions LinkProfile
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-53
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Msc...................................................................................................................................................................................................................................
Full name
Mobile services switching center
Description
This object represents a view of an external Mobile services Switching Center (MSC).
Hierarchical location
Hierarchical location of the Msc object:
Object constraints and supported actions
You can create, delete, and modify this object.
All communication links used by this external MSC must be removed before thisobject can be deleted.
Attributes
The following attributes apply to the Msc object and are available through the GUI andCLI.
Attribute/Name Required Description Value
linkReferences
(Link references)
no (RW) The Distinguished Names(DNs) of the links that arerelated to this object.
Sequenceof 0 through99 records, using thefollowing value(s):
String of characters
No default
uniReferences
(Universal network interfacereference)
no (RW) The list of DistinguishedNames (DNs) of theUniversal Network Interface(UNI) objects that arerelated to this instance.
Sequenceof 0 through99 records, using thefollowing value(s):
String of characters
No default
OMCU
Msc
Externals
SNM object descriptions
...................................................................................................................................................................................................................................
1-54 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
SNM object descriptions Msc
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-55
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
NodeBFunction...................................................................................................................................................................................................................................
Full name
Node B function
Description
This object represents the Node B function supported by the NodeBManagedElementobject.
Note: This object is only visible on the OMC-U CLI.
Hierarchical location
Hierarchical location of the NodeBFunction object:
Object constraints and supported actions
You cannot modify this object.
All communication links used by this Node B function must be removed before thisobject can be deleted.
Attributes
The following attributes apply to the NodeBFunction object and are available throughthe GUI and CLI.
Attribute/Name Required Description Value
linkReferences
(Link references)
no (RW) The Distinguished Names(DNs) of the links that arerelated to this object.
Sequenceof 0 through99 records, using thefollowing value(s):
String of characters
No default
OMCU
NodeBManagedElement
Rns
NodeBFunction
SNM object descriptions
...................................................................................................................................................................................................................................
1-56 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
logicalNodeBReference
(Logical Node B reference)
yes (RW) The Distinguished Name(DN) of the Logical Node B(LNodeB) object that isrelated to this instance.
String of characters
No default
manageableNodeParams
(Manageable NodeParameters)
no (RW) OMCU internal ManageableNode Parameters.
See“Structure ofNodeBFunction values”(p. 1-58).
Default is an emptysequence.
nodeBFunctionIubLink
(Node B function Iub link)
no (RW) The Distinguished Name(DN) of the Iub link that isrelated to this Node Bfunction.
String of characters
No default
nodeBReference
(Node B reference)
yes (RW) The Distinguished name(DN) of the physical NodeBon the Itf-B interface fromthe level of the Node Bmanaged element (parent).
String of characters
No default
uniqueIdentifier
(Unique identifier)
yes (RW) This attribute stores theidentifier that is configuredinto the agent and includedwith the AgentRegistra-tion::registerAgent method.The OMC-U uses thisattribute to locate the objectfrom which to retrieve andreturn to the Agent theappropriate DN Suffix forthe Agent rootobject.
Any valid string.
The maximum lengthis 32 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
uniReferences
(Universal network interfacereference)
no (RW) The list of DistinguishedNames (DNs) of theUniversal Network Interface(UNI) objects that arerelated to this instance.
Sequenceof 0 through99 records, using thefollowing value(s):
String of characters
No default
SNM object descriptions NodeBFunction
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-57
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of NodeBFunction values
The following table describes the value format used for the NodeBFunction objectattribute.
Attribute Sequence of structure Values
manageableNode-Params
grp 0 through 52
bulkProt 0 through 16
ftpDefaultPassword 0 through 16
ftpDefaultUserName 0 through 16
ftpHostIp String of characters
ftpNumRetries -32768 through 32767 step size=1
ftpPort -32768 through 32767 step size=1
ftpRootStatsDir 0 through 256
incrProtocol 0 through 16
localIdentifier 0 through 256
notifProtocol 0 through 16
httpUrl 0 through 256
telnetDefaultPassword 0 through 16
telnetDefaultUserName 0 through 16
telnetHostIp String of characters
telnetPort -32768 through 32767 step size=1
userLabel 0 through 52
ver 0 through 52
SNM object descriptions NodeBFunction
...................................................................................................................................................................................................................................
1-58 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
nodeId -32768 through 32767 step size=1
SNM object descriptions NodeBFunction
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-59
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
NodeBManagedElement...................................................................................................................................................................................................................................
Full name
Node B managed element
Description
This object represents the equipment within the network that perform Node Bfunctions. The NodeB object communicates with the NodeBManagedElement objectover one or more interfaces for the purpose of being monitored or controlled, providingsupport and/or service to the subscriber.
Note: This object is only visible on the OMC-U CLI.
Hierarchical location
Hierarchical location of the NodeBManagedElement object:
Object constraints and supported actions
You cannot modify this object. The NodeBManagedElement object is created when theNodeB object is created.
When you delete the NodeB object the NodeBManagedElement object is deleted alongwith any contained RNC and Node B functions. The following are the objectconstraints for deleting a NodeBManagedElement object:
• You must make sure that you removed all communication links used by thecontained Node B and RNC functions before deleting the NodeBManagedElementobject.
Attributes
The following attributes apply to the NodeBManagedElement object and are availablethrough the GUI and CLI.
OMCU
NodeBManagedElement
Rns
SNM object descriptions
...................................................................................................................................................................................................................................
1-60 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userDefinedState
(User defined state)
no (RW) Operator-defined textualinformation about the stateof the element.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
SNM object descriptions NodeBManagedElement
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-61
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
OMCU...................................................................................................................................................................................................................................
Full name
Operations and maintenance center UTRAN
Description
This object represents collections of interconnected telecommunications andmanagement objects (logical or physical) capable of exchanging information.
Hierarchical location
Hierarchical location of the OMCU object:
Object constraints and supported actions
You cannot create or delete the OMCU object. The object is created during OMC-Ucommisioning.
Attributes
The following attributes apply to the OMCU object and are available through the GUIand CLI.
Attribute/Name Required Description Value
dnPrefix
(Distinguished name prefix)
no (RW) The Distinguished Name(DN) that is used as a prefixfor this subnetwork.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
OMCU
SNM object descriptions
...................................................................................................................................................................................................................................
1-62 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
locationName
(Location name)
no (RW) The physical location of thiselement.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
mimVersion
(Management informationmodel version)
no (RW) The version of theManagement InformationModel (information model)that is supported by thismanagement agent.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
subNetworkId no (RW) An attribute whose ’name +value’ can be used as anRDN when naming aninstance of the SubNetworkobject class. This RDNuniquely identifies theobject instance within thescope of its containing(parent) object instanc
-32768 through 32767step size=1
Default = 0
subNwUserLabel
(Sub Network User Label)
no (RW) Sub Network User Label 0 through 52
Default =OMC-System
swVersion
(Software version)
yes (RW) The software version of themanaged element.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
SNM object descriptions OMCU
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-63
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
unis
(Universal networkinterfaces)
no (RW) The list of the DistinguishedNames (DNs) of theUniversal Network Interface(UNI) objects that arerelated to this managementnode.
Sequenceof 0 through2 records, using thefollowing value(s):
String of characters
No default
userDefinedNetworkType
(User defined network type)
no (RW) Textual information aboutthe type of network.
0 through 52
Default = UMTS
userDefinedState
(User defined state)
no (RW) Operator-defined textualinformation about the stateof the element.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
utranDnPrefix
(UTRAN Network DNPrefix)
no (RW) Prefix for the UTRANNetwork distinguished name(DN)
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
utranSubNetworkId
(UTRAN Network ID)
no (RW) Identity of the UTRAN subnetwork.
-32768 through 32767step size=1
Default = 999
SNM object descriptions OMCU
...................................................................................................................................................................................................................................
1-64 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
utranSubNwUserLabel
(Utran Network User Label)
no (RW) A user assigned name forthe UTRAN Network.
0 through 52
Default =UTRAN-System
utranUserDefinedNetwork-Type
(UTRAN Network UserDefined Network Type)
no (RW) UTRAN Network UserDefined Network Type.
0 through 52
Default = UTRAN
SNM object descriptions OMCU
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-65
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
RncFunction...................................................................................................................................................................................................................................
Full name
RNC function
Description
This object represents the RNC function supported by the RncManagedElement.
Note: This object is only visible on the OMC-U CLI.
Hierarchical location
Hierarchical location of the RncFunction object:
Object constraints and supported actions
You cannot modify this object. The RncFunction object is created when the RNC iscreated.
The following are the object constraints for creating an RncFunction object:
• The value of theuniqueIdentifier attribute must be unique across all instancesof the RncFunction.
The RncFunction object is deleted when the RNC is deleted.
The following are the object constraints for deleting an RncFunction object:
• All communication links used by this RNC function must be removed before thisobject can be deleted.
Attributes
The following attributes apply to the RncFunction object and are available through theGUI and CLI.
OMCU
RncManagedElement
Rns
RncFunction
SNM object descriptions
...................................................................................................................................................................................................................................
1-66 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
linkReferences
(Link references)
no (RW) The Distinguished Names(DNs) of the links that arerelated to this object.
Sequenceof 0 through99 records, using thefollowing value(s):
String of characters
No default
manageableNodeParams
(Manageable NodeParameters)
no (RW) OMCU internal ManageableNode Parameters.
See“Structure ofRncFunction values”(p. 1-68).
Default is an emptysequence.
rncReference
(RNC reference)
yes (RO-SC) The Distinguished Name(DN) of the RNC object thatis related to this RNCfunction.
String of characters
No default
uniqueIdentifier
(Unique identifier)
yes (RW) This attribute stores theidentifier that is configuredinto the agent and includedwith the AgentRegistra-tion::registerAgent method.The OMC-U uses thisattribute to locate the objectfrom which to retrieve andreturn to the Agent theappropriate DN Suffix forthe Agent rootobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
uniReferences
(Universal network interfacereference)
no (RW) The list of DistinguishedNames (DNs) of theUniversal Network Interface(UNI) objects that arerelated to this instance.
Sequenceof 0 through99 records, using thefollowing value(s):
String of characters
No default
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
SNM object descriptions RncFunction
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-67
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Structure of RncFunction values
The following table describes the value format used for the RncFunction objectattribute.
Attribute Sequence of structure Values
manageableNode-Params
grp 0 through 52
bulkProt 0 through 16
ftpDefaultPassword 0 through 16
ftpDefaultUserName 0 through 16
ftpHostIp String of characters
ftpNumRetries -32768 through 32767 step size=1
ftpPort -32768 through 32767 step size=1
ftpRootStatsDir 0 through 256
httpUrl 0 through 256
incrProtocol 0 through 16
localIdentifier 0 through 256
notifProtocol 0 through 16
telnetDefaultPassword 0 through 16
telnetDefaultUserName 0 through 16
telnetHostIp String of characters
telnetPort -32768 through 32767 step size=1
userLabel 0 through 52
ver 0 through 52
nodeId -32768 through 32767 step size=1
SNM object descriptions RncFunction
...................................................................................................................................................................................................................................
1-68 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
RncManagedElement...................................................................................................................................................................................................................................
Full name
RNC managed element
Description
This object represents the equipment within the network that perform RNC managedelement functions, providing support and/or service to the subscriber. The RNC objectcommunicates with the RncManagedElement object (directly or indirectly) over one ormore interfaces for the purpose of being monitored and controlled. A managed objectcontains equipment that may or may not be geographically distributed. A managedobject is often referred to as a node or network element.
Note: This object is only visible on the OMC-U CLI.
Hierarchical location
Hierarchical location of the RncManagedElement object:
Object constraints and supported actions
You cannot modify this object. The RncManagedElement object is created when theRNC is created.
When you delete the RNC object the RncManagedElement object is deleted along withany contained RNC and Node B functions. The following are the object constraints fordeleting an RncManagedElement object:
• You must make sure that you remove all communication links used by thecontained Node B and RNC functions before deleting the RncManagedElementobject.
Attributes
The following attributes apply to the RncManagedElement object and are availablethrough the GUI and CLI.
OMCU
RncManagedElement
Rns
SNM object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-69
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userDefinedState
(User defined state)
no (RW) Operator-defined textualinformation about the stateof the element.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
SNM object descriptions RncManagedElement
...................................................................................................................................................................................................................................
1-70 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Rns...................................................................................................................................................................................................................................
Full name
Radio network subsystem
Description
This object represents a Radio Network Subsystem (RNS).
An RNS consists of one Radio Network Controller (RNC), one or more Node Bs.
Hierarchical location
Hierarchical location of the Rns object:
Object constraints and supported actions
You cannot modify this object.
The following are the object constraints for deleting an Rns object:
• You must make sure that you delete all contained managed element objects beforedeleting the Rns object.
Attributes
The following attributes apply to the Rns object and are available through the GUI andCLI.
Attribute/Name Required Description Value
dnPrefix
(Distinguished name prefix)
no (RW) The Distinguished Name(DN) that is used as a prefixfor this subnetwork.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Rns
OMCU
SNM object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-71
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
subNetworkId no (RW) An attribute whose ’name +value’ can be used as anRDN when naming aninstance of the SubNetworkobject class. This RDNuniquely identifies theobject instance within thescope of its containing(parent) object instanc
-32768 through 32767step size=1
Default = 0
subNwUserLabel
(Sub Network User Label)
no (RW) Sub Network User Label Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
userDefinedNetworkType
(User defined network type)
no (RW) Textual information aboutthe type of network.
0 through 52
Default = RNS
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
SNM object descriptions Rns
...................................................................................................................................................................................................................................
1-72 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Sgsn...................................................................................................................................................................................................................................
Full name
Serving GPRS support node
Description
This object represents a view of an external Serving GPRS Support Node (SGSN).
Hierarchical location
Hierarchical location of the Sgsn object:
Object constraints and supported actions
You can create, delete, and modify this object.
All communication links used by this external SGSN must be removed before thisobject can be deleted.
Attributes
The following attributes apply to the Sgsn object and are available through the GUIand CLI.
Attribute/Name Required Description Value
linkReferences
(Link references)
no (RW) The Distinguished Names(DNs) of the links that arerelated to this object.
Sequenceof 0 through99 records, using thefollowing value(s):
String of characters
No default
OMCU
Sgsn
Externals
SNM object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-73
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sgsnId
(Serving GPRS support nodeidentity)
yes (RW) The number or name that isthe unique identifier of theServing GPRS Support Node(SGSN) within thepacket-switched network.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
uniReferences
(Universal network interfacereference)
no (RW) The list of DistinguishedNames (DNs) of theUniversal Network Interface(UNI) objects that arerelated to this instance.
Sequenceof 0 through99 records, using thefollowing value(s):
String of characters
No default
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
SNM object descriptions Sgsn
...................................................................................................................................................................................................................................
1-74 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Uni...................................................................................................................................................................................................................................
Full name
User network interface
Description
This object contains information for the Asynchronous Transfer Mode (ATM) edgedevice ports or User Network Interfaces (UNIs) that are available for UMTS allocationusage. This object also contains network element physical port data that is associatedwith the UNI.
Note: This object is only visible on the OMC-U CLI.
Hierarchical location
Hierarchical location of the Uni object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following are the object constraints for deleting a Uni object:
• You must make sure that theCurrentNumberVCCsProvisioned attribute is equal tozero.
• You must make sure that the Uni object does not have any port informationspecified.
The following are the object constraints for modifying a Uni object using thesetcommand:
• You must make sure thatmaxVPI > minVPI.
• You must make sure thatmaxVCI > minVCI.
• You must make sure thatneMaxVPI > neMinVPI.
• You must make sure thatneMaxVCI > neMinVCI.
Attributes
The following attributes apply to the Uni object and are available through the GUI andCLI.
Uni
OMCU
SNM object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-75
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
currentNumberVCCsProvi-sioned
(Current number of virtualchannel connections that areprovisioned)
no (RW) The current number ofVirtual Channel Connections(VCCs) that are provisionedon this user networkinterface.
0 through 2147483647step size=1
Default = 0
dhcpRelayAgentIpAddress
(BOOTP/DHCP Relay AgentIP address)
no (RW) IP Address of theBOOTP/DHCP Relay Agent,
String of characters
No default
edgeDeviceIMAGroupMem-bers
(Edge device groupinformation)
no (RW) Sequence of ATM EdgeDevice IMA UNI Groupinformation.
Sequenceof 0 through8 records, using thefollowing value(s):
See“Structure of Univalues” (p. 1-81).
Default is an emptysequence.
edgeDeviceName
(Edge device name)
yes (RW) The name of the edgedevice card supporting portused by this User NetworkInterface (UNI).
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
edgeDevicePortInfo
(Edge device portinformation)
no (RW) Set of edge device slot,port, and channel for thephysical port(s) used by thisUser Network Interface(UNI).
Sequenceof 0 through2 records, using thefollowing value(s):
See“Structure of Univalues” (p. 1-81).
Default is an emptysequence.
edgeDeviceVclTermination no (RW) This attribute defines thefinal Virtual Channel Link(VCL) termination point forthe Permanent VirtualCircuit (PVC) on the edgedevice.
notApplicable
(Edge device virtual channellink termination)
bridgeGroup
SNM object descriptions Uni
...................................................................................................................................................................................................................................
1-76 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
ipEdgeRouterVpn
Default: notApplicable
ermVpnIpNetworkInter-faceOffset
(ERM virtual privatenetwork IP networkinterface offset)
no (RW) This defines the offset to beapplied to the IP networkinterface number on the IPedge router Virtual PrivateNetwork (VPN).
-1 through 1024 stepsize=1
Default = -1
functionReference
(Function reference)
no (RW) The Distinguished Names(DNs) of the networkelements (functions) ormanagement nodes that arerelated to this universalnetwork interface.
Sequenceof 0 through2 records, using thefollowing value(s):
String of characters
No default
imaFrameLength no (RW) This parameter defines theframe length for the IMAgroup.
notApplicable
(IMA group frame length) m32
m64
m128
m256
Default: notApplicable
imaFrameSyncParam
(IMA frame synchronizationparameter)
no (RW) This parameter consists of aset of 3 data items (Alpha,Beta, Gamma), required tocontrol the IMA FrameSynchronization Mechanism(IFSM).
See“Structure of Univalues” (p. 1-81).
Default = {2,
2,
1}
imaIdentifier
(IMA group identifier)
no (RW) This parameter defines theidentifier of the IMA group.
-1 through 255 stepsize=1
Default = -1
imaMinLinks
(IMA group minimum links)
no (RW) The parameter contains theminimum number of linksrequired for the operation ofthe IMA group.
-1 through 7 stepsize=1
Default = -1
ipEdgeRouter
(IP edge router)
no (RW) Defines the IP edge routerserving this User NetworkInterface (UNI).
-1 through 999 stepsize=1
Default = -1
SNM object descriptions Uni
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-77
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
ipEdgeRouterBGNet-workInterface
(IP edge router bridge groupnetwork interface)
no (RW) Defines the bridge groupnetwork interface on IP edgerouter serving this LANUser Network Interface(UNI).
-1 through 9999 stepsize=1
Default = -1
ipEdgeRouterVpn
(IP edge router virtualprivate network)
no (RW) Defines the Virtual PrivateNetwork (VPN) on IP edgerouter serving this UserNetwork Interface (UNI).
-1 through 999 stepsize=1
Default = -1
lanBridgeGroup
(Local area network bridgegroup)
no (RW) Defines the Local AreaNetwork (LAN) bridgegroup.
-1 through 999 stepsize=1
Default = -1
maxVCI
(Maximum virtual channelidentifier)
yes (RW) The maximum value thatmay be used for the pool ofVirtual Channel Identifiers(VCIs).
32 through 65535 stepsize=1
Default = 65535
maxVPI
(Maximum virtual pathidentifier)
yes (RW) The maximum value thatmay be used for the pool ofVirtual Path Identifiers(VPIs).
1 through 4095 stepsize=1
Default = 255
minVCI
(Minimum virtual channelidentifier)
yes (RW) The minimum value thatmay be used for the pool ofVirtual Channel Identifiers(VCIs).
32 through 65535 stepsize=1
Default = 32
minVPI
(Minimum virtual pathidentifier)
yes (RW) The minimum value thatmay be used for the pool ofVirtual Path Identifiers(VPIs).
0 through 4095 stepsize=1
Default = 0
neMaxVCI
(Network element maximumvirtual channel identifier)
no (RW) The maximum value thatmay be used for the pool ofVirtual Channel Identifiers(VCIs).
33 through 65535 stepsize=1
Default = 65535
neMaxVPI
(Network element maximumvirtual path identifier)
no (RW) The maximum value thatmay be used for the pool ofVirtual Path Identifiers(VPIs).
1 through 255 stepsize=1
Default = 255
SNM object descriptions Uni
...................................................................................................................................................................................................................................
1-78 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
neMinVCI
(Network element minimumvirtual channel identifier)
no (RW) The minimum value thatmay be used for the pool ofVirtual Channel Identifiers(VCIs).
32 through 65535 stepsize=1
Default = 32
neMinVPI
(Network element minimumvirtual path identifier)
no (RW) The minimum value thatmay be used for the pool ofVirtual Path Identifiers(VPIs).
0 through 255 stepsize=1
Default = 0
nePortDn
(Network port distinguishedname)
no (RW) The Distinguished Name(DN) of the hardware portthat is connected to this usernetwork interface.
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
neTypeEarmarkedFor yes (RW) The type of UMTS networkelement for which this UserNetwork Interface objectwas created (earmarked).
rnc
(Network entity typeearmarked for)
nodeb
omcu
msc
sgsn
No default
neUserLabel
(Network entity user label)
no (RW) A unique description for theport.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
SNM object descriptions Uni
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-79
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
niEdgeDevicePortInfo
(Network interface edgedevice port information)
no (RW) This attribute defines theslot, port, and channelnumber of the edge devicesupporting network interfaceused by the UNI fortermination of InternetProtocol over ATM (IPOA)Permanent Virtual Circuits(PVCs).
Sequenceof 0 through2 records, using thefollowing value(s):
See“Structure of Univalues” (p. 1-81).
Default is an emptysequence.
nsapAddress
(Network service accesspoint address)
yes (RW) The unique ATM endaddress that identifies thisuser network interface.
Any valid string.
The maximum lengthis 60 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
physicalPortType yes (RW) The physical port type thatis attached at the usernetwork interface.
e1
(Physical port type) t1
stm1
stm1Pg
ethernet
ipEdgeRouterVpn
e1ImaGroup
t1ImaGroup
e3
t3
No default
primaryDhcpServerIpAd-dress
(Primary DHCP Server IPaddress)
no (RW) IP Address of the PrimaryDHCP Server, to beconfigured in theBOOTP/DHCP Relay Agent
String of characters
No default
SNM object descriptions Uni
...................................................................................................................................................................................................................................
1-80 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
secondaryDhcpServerIpAd-dress
(Secondary DHCP Server IPaddress)
no (RW) IP Address of the SecondaryDHCP Server, to beconfigured in theBOOTP/DHCP Relay Agent
String of characters
No default
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vciOffset
(Virtual channel identifieroffset)
no (RW) This is an offset to be usedwhen calculating the VirtualChannel Identifier (VCI).
-1 through 65535 stepsize=1
Default = -1
vpiOffset
(Virtual path identifieroffset)
no (RW) This is an offset to be usedwhen calculating the VirtualPath Identifier (VPI).
-1 through 4095 stepsize=1
Default = -1
Structure of Uni values
The following table describes the value format used for the Uni object attribute.
Attribute Sequence of structure Values
edgeDeviceIMAGroup-Members
slot -1 through 999 step size=1
port -1 through 999 step size=1
channel -1 through 999 step size=1
userlabel 0 through 100
shelf -1 through 999 step size=1
module -1 through 999 step size=1
subChannel -1 through 999 step size=1
edgeDevicePortInfo slot -1 through 999 step size=1
port -1 through 999 step size=1
channel -1 through 999 step size=1
SNM object descriptions Uni
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-81
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
shelf -1 through 999 step size=1
module -1 through 999 step size=1
subChannel -1 through 999 step size=1
imaFrameSyncParam alpha 1 through 2 step size=1
beta 1 through 5 step size=1
gamma 1 through 1 step size=1
niEdgeDevicePortInfo slot -1 through 999 step size=1
port -1 through 999 step size=1
channel -1 through 999 step size=1
shelf -1 through 999 step size=1
module -1 through 999 step size=1
subChannel -1 through 999 step size=1
SNM object descriptions Uni
...................................................................................................................................................................................................................................
1-82 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
VccDetail...................................................................................................................................................................................................................................
Full name
Virtual channel connection detail
Description
This object defines a template that is referenced when creating object link bundles.
This object contains information on the bundle of Virtual Channel Connections (VCCs)required to create a link, information about which QoS object and which networkelement physical port uses the VCC, and information on the Virtual Path Identifier(VPI) and Virtual Channel Identifier (VCI) numbers used in conjunction with an ATMVPI/VCI allocation algorithm.
The VccDetail object must exist before any links that use the VccDetail object can becreated.
Note: This object is only visible on the OMC-U CLI.
Hierarchical location
Hierarchical location of the VccDetail object:
Object constraints and supported actions
You cannot modify this object. This object is created as part of OMC-Ucommissioning.
The following are the object constraints for deleting a VccDetail object:
• You must make sure that no objects reference the VccDetail object.
Attributes
The following attributes apply to the VccDetail object and are available through theGUI and CLI.
OMCU
VccDetail
LinkProfile
SNM object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-83
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vccPortMap
(Virtual channel connectionport mapping)
no (RO-SC) List of the attributes that arerelated to this ATMconnection.
Sequenceof 0 through255 records, using thefollowing value(s):
See“Structure ofVccDetail values”(p. 1-85).
Default is an emptysequence.
vccType yes (RO-SC) The interface type for whichthis virtual connection hasbeen defined.
mtp3b
(Virtual channel connectiontype)
userplanePs
userplaneCs
userplaneR
userplaneB
nbcpNbap
ccpNbap
alcap
itfR
itfB
initCcms
mtp3bRanap
mtp3bRnsap
mtp3bAlcap
No default
SNM object descriptions VccDetail
...................................................................................................................................................................................................................................
1-84 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
vccTypeName
(Virtual channel connectiontype name)
yes (RO-SC) Operator-defined text stringthat is used to identify thistype of Virtual ChannelConnection (VCC).
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of VccDetail values
The following table describes the value format used for the VccDetail object attribute.
Attribute Sequence of structure Values
vccPortMap vccQosIdentifier String of characters
containedPortType e1
t1
stm1
stm1Pg
ethernet
ipEdgeRouterVpn
e1ImaGroup
t1ImaGroup
e3
t3
containedMaxLinksSeq 0 through 512
containedPortDNSeq 0 through 512
containedStartVpiNumber 0 through 255 step size=1
containedStartVciNumber 32 through 65535 step size=1
containedVpiIncrement -2147483647 through 2147483647 stepsize=1
containedVciIncrement -2147483647 through 2147483647 stepsize=1
containedAlcapOwnership lOCAL
rEMOTE
SNM object descriptions VccDetail
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-85
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
notApplicable
associatedPortType e1
t1
stm1
stm1Pg
ethernet
ipEdgeRouterVpn
e1ImaGroup
t1ImaGroup
e3
t3
associatedMaxLinksSeq 0 through 512
associatedPortDNSeq 0 through 512
associatedStartVpiNumber 0 through 255 step size=1
associatedStartVciNumber 32 through 65535 step size=1
associatedVpiIncrement -2147483647 through 2147483647 stepsize=1
associatedVciIncrement -2147483647 through 2147483647 stepsize=1
associatedAlcapOwnership lOCAL
rEMOTE
notApplicable
a2PIdentifier -1 through 2147483647 step size=1
a2PIdentifierIncrement -999999999 through 999999999 step size=1
lnkTstSLC -1 through 15 step size=1
lnkTstSLCIncrement -999999999 through 999999999 step size=1
priority 0 through 255 step size=1
SNM object descriptions VccDetail
...................................................................................................................................................................................................................................
1-86 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
VccQos...................................................................................................................................................................................................................................
Full name
Virtual channel connection quality of service
Description
This object contains information on the Quality of Service (QoS) profile that isassociated with an ATM Virtual Channel Connection (VCC). These QoS parameters arenetwork QoS parameters required when setting up the soft PVCs.
Note: This object is only visible on the OMC-U CLI.
Hierarchical location
Hierarchical location of the VccQos object:
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“VccQos” (p. A-3) in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You cannot modify or delete this object. This object is created as part of OMC-Ucommissioning.
Attributes
The following attributes apply to the VccQos object and are available through the GUIand CLI.
Attribute/Name Required Description Value
aal2PathSubscriptionLevel
(AAL2 path subscriptionlevel)
yes (RO-SC) The percentage ofoversubscription permittedon a particular ATMAdaptation Layer type 2(AAL2) path.
100 through 500 stepsize=1
Default = 100
VccQos
OMCU
SNM object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-87
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
aalType yes (RO-SC) The ATM Adaptation Layer(AAL) type that is allowedfor this connection.
aal2
(ATM adaptation layer type) aal5
No default
atmClass yes (RO-SC) The ATM service type. cbr
(ATM class) vbrRt
vbrNrt
ubr
abr
No default
cellDelayVariationTolerance
(Cell delay variationtolerance)
yes (RO-SC) The variance in cell deliverytime.
-1 through 2147483647step size=1
No default
cellLossRatio
(Cell loss ratio)
yes (RO-SC) The fraction of ATM cellsthat may be lost or deliveredlate.
-1 through 21 stepsize=1
No default
eDCHulCacSubsLevels
(E-DCH Uplink, CarrierAccess Code subscriptionlevels)
yes (RO-SC) This parameter defines theE-DCH Uplink CarrierAccess Code subscriptionlevels.
See“Structure ofVccQos values”(p. 1-94).
Default = {100,
100,
100,
100,
100}
hSDPACongestionSum-CappedRate
yes (RO-SC) This attribute specifies thecapped HSDPA maximumrate to be used for the RateController functionality forthe sum ofall the HSDPAconnections on the PVC..
0 through 50000 stepsize=1
Default = 1000
maxBurstSize
(Maximum burst size)
yes (RO-SC) The maximum burst sizethat is allowed for this ATMservice class.
-1 through 65535 stepsize=1
No default
SNM object descriptions VccQos
...................................................................................................................................................................................................................................
1-88 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
maxCellTransferDelay
(Maximum cell transferdelay)
yes (RO-SC) The maximum ATM celltransfer delay that isallowed for this quality ofservice definition.
-1 through 2147483647step size=1
No default
maxCPSPacketPayloadSize
(CPS Packet Size)
no (RO-SC) This parameter defines themaximum size of an AAL2CPS-Packet payload.
1 through 64 stepsize=1
Default = 64
maxFrameSize
(Maximum frame size)
yes (RO-SC) The maximum ATM framesize that is allowed for thisquality of service definition.
-1 through 65535 stepsize=1
No default
maxHSDPAFrameSize
(Maximum HSDPA FrameSize)
yes (RO-SC) Maximum HSDPA FrameSize in bytes.
500 through 1472 stepsize=1
Default = 1472
minCellRate
(Minimum cell rate)
yes (RO-SC) The minimum cell rate thatis permitted for this serviceclass.
-1 through 2147483647step size=1
No default
nodebUniOversubscription
(Node B user networkinterface oversubscription)
no (RO-SC) Defines the expected NodeB E1/T1/IMAoversubscription on theATM edge device UserNetwork Interface (UNI). Avalue of -1.0 signifies notapplicable for this VccQos.
Sequenceof 0 through8 records, using thefollowing value(s):
-1.0 through 10.0
Default = -1.0
peakCellRate
(Peak cell rate)
yes (RO-SC) The peak cell rate that ispermitted for this serviceclass.
-1 through 2147483647step size=1
No default
peakToPeakCellDelayVaria-tion
(Peak to peak cell delayvariation)
yes (RO-SC) The worst-case delayvariation that is allowed forthe delivery of an ATM cell.
-1 through 65535 stepsize=1
No default
rncUniOversubscription
(RNC user network interfaceoversubscription)
no (RO-SC) Defines the expected RNCPG UNI oversubscription onthe ATM edge device UserNetwork Interface (UNI). Avalue of -1.0 signifies notapplicable for this VccQos.
Sequenceof 0 through8 records, using thefollowing value(s):
-1.0 through 10.0
Default = -1.0
SNM object descriptions VccQos
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-89
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sustainedCellRate
(Sustained cell rate)
yes (RO-SC) The long-term average cellrate that is permitted for thisATM service class.
-1 through 2147483647step size=1
No default
trafficClassMinimumRate
(Traffic Class MinimumRate)
yes (RO-SC) This attribute provides thevalue that specifies theminimum rate for theservice.
See“Structure ofVccQos values”(p. 1-94).
Default = {0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0}
trafficClassSubsLevels
(Traffic class subscriptionlevels)
yes (RO-SC) Provides the value thatindicates the percentage ofoversubscription permittedby a particular BEARERQoS trafficClass within aparticular AAL2 path.
See“Structure ofVccQos values”(p. 1-94).
Default = {100,
100,
100,
100,
100,
100,
100,
100}
umtsQosClass yes (RO-SC) The UMTS Quality ofService (QoS) class that ispermitted for this service.
notApplicable
(UMTS quality of serviceclass)
conv
SNM object descriptions VccQos
...................................................................................................................................................................................................................................
1-90 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
strm
convAndStrm
int
back
intAndBack
strmAndIntAndBack
convAndStrmAnd-IntAndBack
comch
comchAndConvAnd-Strm
comchAndIntAndBack
comchAndStrmAnd-IntAndBack
comchAndConvAndStr-mAndIntAndBack
Default: notApplicable
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vccUsage yes (RO-SC) Applies to PermanentVirtual Circuits (PVCs) thatare shared by differenttraffic classes. Controls useof the Virtual ChannelConnection (VCC) bypacket switched data,HSPDA data, circuitswitched data, and voicetraffic.
nOTAPPLICABLE
(Virtual channel connectionusage)
pSDATAONLY
SNM object descriptions VccQos
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-91
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
cSDATAONLY
pSDATAANDCS-DATAONLY
vOICEONLY
vOICEANDPSDATA-ONLY
vOICEANDCSDATA-ONLY
vOICEANDCS-DATAANDPSDATA-ONLY
hSDATAONLY
hSDATAANDPSDATA-ONLY
hSDATAANDCS-DATAONLY
hSDATAANDPS-DATAANDCSDATA-ONLY
hSDATAAND-VOICEONLY
hSDATAANDVOICE-ANDPSDATAONLY
hSDATAANDVOICE-ANDCSDATAONLY
hSDATAANDVOICE-ANDCSDATAANDPS-DATA
hSUPAONLY
hSUPAANDPSDATA-ONLY
hSUPAANDCSDATA-ONLY
hSUPAANDPS-DATAANDCSDATA-ONLY
SNM object descriptions VccQos
...................................................................................................................................................................................................................................
1-92 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
hSUPAAND-VOICEONLY
hSUPAANDVOICE-ANDPSDATAONLY
hSUPAANDVOICE-ANDCSDATAONLY
hSUPAANDVOICE-ANDCSDATAANDPS-DATAONLY
hSDPAONLY
hSDPAANDPSDATA-ONLY
hSDPAANDCSDATA-ONLY
hSDPAANDPS-DATAANDCSDATA-ONLY
hSDPAAND-VOICEONLY
hSDPAANDVOICE-ANDPSDATAONLY
hSDPAANDVOICE-ANDCSDATAONLY
hSDPAANDVOICE-ANDCSDATAANDPS-DATAONLY
aLLSERVICES
Default:nOTAPPLICABLE
SNM object descriptions VccQos
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-93
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
wMBwdSubsLevels
(Weighted mean backwardsubscription level)
yes (RO-SC) This attribute provides afigure to be used for ULPVC CAC.
See“Structure ofVccQos values”(p. 1-94).
Default = {100,
100,
100,
100,
100,
100,
100,
100,
100}
wMFwdSubsLevels
(Weighted mean forwardsubscription level)
yes (RO-SC) This provides the ratecontrollers and CallAdmission Controls with afigure for non-ratecontrolled traffic classes.For example, signalling,voice, AND for weightedbandwidth allocation forhandover traffic (Interactive,Background and so on) fromthe IuR destined for IuBPVC.
See“Structure ofVccQos values”(p. 1-94).
Default = {100,
100,
100,
100,
100,
100,
100,
100,
100}
Structure of VccQos values
The following table describes the value format used for the VccQos object attribute.
Attribute Sequence of structure Values
eDCHulCacSubsLevels dcchSig 100 through 10000 step size=5
int1 100 through 10000 step size=5
int2 100 through 10000 step size=5
int3 100 through 10000 step size=5
back 100 through 10000 step size=5
SNM object descriptions VccQos
...................................................................................................................................................................................................................................
1-94 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
trafficClassMinimum-Rate
dCHINT1 0 through 1000 step size=1
dCHINT2 0 through 1000 step size=1
dCHINT3 0 through 1000 step size=1
dCHBACK 0 through 1000 step size=1
hSDINT1 0 through 1000 step size=1
hSDINT2 0 through 1000 step size=1
hSDINT3 0 through 1000 step size=1
hSDBACK 0 through 1000 step size=1
edchInt1 0 through 1000 step size=1
edchInt2 0 through 1000 step size=1
edchInt3 0 through 1000 step size=1
edchBack 0 through 1000 step size=1
trafficClassSubsLevels dchInt1 100 through 15000 step size=1
dchInt2 100 through 15000 step size=1
dchInt3 100 through 15000 step size=1
dchBack 100 through 15000 step size=1
hsdInt1 100 through 15000 step size=1
hsdInt2 100 through 15000 step size=1
hsdInt3 100 through 15000 step size=1
hsdBack 100 through 15000 step size=1
wMBwdSubsLevels dcchSig 100 through 500 step size=1
voice 100 through 500 step size=1
convNonVoice 100 through 500 step size=1
comCh 100 through 500 step size=1
strm 100 through 500 step size=1
int1 100 through 500 step size=1
int2 100 through 500 step size=1
int3 100 through 500 step size=1
back 100 through 500 step size=1
wMFwdSubsLevels dcchSig 100 through 500 step size=1
voice 100 through 500 step size=1
SNM object descriptions VccQos
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
1-95
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
convNonVoice 100 through 500 step size=1
comCh 100 through 500 step size=1
strm 100 through 500 step size=1
int1 100 through 500 step size=1
int2 100 through 500 step size=1
int3 100 through 500 step size=1
back 100 through 500 step size=1
SNM object descriptions VccQos
...................................................................................................................................................................................................................................
1-96 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
2 2RNC object descriptions
Overview...................................................................................................................................................................................................................................
Purpose
This chapter contains the descriptions of all the RNC objects.
Contents
RNC information model 2-4
AC 2-7
ATMQOS 2-14
Cabinet 2-25
CellSP 2-27
CICC 2-30
CICCBPEtherPort 2-34
CICCProc 2-37
EDCH 2-43
ESC 2-46
ESCBPEtherPort 2-53
ESCFAEtherPort 2-56
ESCProc 2-59
ExtAlmBox 2-62
FanTray 2-67
FBPShelf 2-71
FddExtCell 2-75
GICC 2-87
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-1
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
GICCBPEtherPort 2-91
GICCFAEtherPort 2-94
GICCPair 2-97
GICCProc 2-100
GICCSTM1OC3Port 2-106
GsmExtCell 2-109
HSDPA 2-114
IntraFreqMeas 2-120
IPQOS 2-128
IuB 2-132
IuCS 2-138
IuPS 2-146
IuPSSubNet 2-153
IuR 2-157
LA 2-165
LCell 2-168
LNodeB 2-225
LRNC 2-231
OCNS 2-287
OCNSHSDPA 2-293
PeriodCriteria 2-297
PG 2-301
PRACH 2-304
PRNC 2-310
PSU 2-314
RA 2-318
RFTrace 2-321
SACS 2-326
SAPS 2-329
SB 2-332
SBBPEtherPort 2-340
SBClan 2-343
RNC object descriptions Overview
...................................................................................................................................................................................................................................
2-2 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SBProc 2-346
SCCPCHFach 2-349
SCCPCHPch 2-355
SMLC 2-361
SpareMOC 2-365
SS7Link 2-367
SS7LinkSet 2-371
SS7Stack 2-375
SS7StackInst 2-386
SuMgr 2-389
UNIStack 2-393
URA 2-398
RNC object descriptions Overview
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-3
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
RNC information model...................................................................................................................................................................................................................................
Overview
The RNC information model presents a network element management view of thelogical and physical resources for a particular RNC element within the UTRAN.
RNC hardware object tree
The following diagram illustrates the hardware-related objects of the RNC informationmodel.
RNC object descriptions
...................................................................................................................................................................................................................................
2-4 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
RNC logical object tree
The following diagram illustrates the logical objects of the RNC information model.
ExtAlmBox
CICCProc
FBPShelf
CICC
LRNC
Cabinet
FanTray
= Pre-configured
=
=
Containment
Association
Refer to logical object tree=
GICC ESCSBPSU AC
CICCBPEtherPort
GICCProc
GICCBPEtherPort
GICCFAEtherPort
GICCSTM1OC3Port
SBProc
SBBPEtherPort
ESCBPEtherPort
ESCFAEtherPort
ESCProc
SBClan
PG
Network
Rns
SMLC
GICCPair
RNC object descriptions RNC information model
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-5
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
=
GsmExtCell
LA
SAPS
SACS
IntraFreqMeas
PeriodCriteria
PRACH
LCell
SCCPCHFach
OCNS
LNodeB
URA
RA
FddExtCell
RFTrace
LRNC
=
= Association
Containment
Value valid for all
SS7LinkSet
SS7Link
PG
ATMQOS
IuCSIub IuPSPRNC IuR
SCCPCHPch
IuPSSubNet UNIStack CellSP
Rns
= Pre-configured
SuMgr
HSDPA
SS7StackInst
OCNSHSDPA
SS7Stack
Network
EDCH
RNC object descriptions RNC information model
...................................................................................................................................................................................................................................
2-6 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
AC...................................................................................................................................................................................................................................
Full name
Alarm card
Description
This object represents an alarm card in theFlexent® Blade Platform (FBP) shelf.
Hierarchical location
Hierarchical location of the AC object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the AC object and are available through the GUI andCLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: locked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 52
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 52
Default = N/A
AC
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-7
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 52
Default = N/A
currentSoftwareVersion
(Current software version)
no (RO) The version of the softwarethat is currently running onthe related component.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
dateOfManufacture
(Inventory unit build date)
no (RO) Date of Manufacture ofinventory unit.
0 through 52
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 52
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
RNC object descriptions AC
...................................................................................................................................................................................................................................
2-8 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitId
(Inventory unit identifier)
yes (RO-SC) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
manufacturerData
(Manufacturer identity ofthe inventory unit)
no (RO) Manufacturer specific dataof the inventory unit.
0 through 52
Default = N/A
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 52
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 52
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 52
Default = N/A
shelfNumber
(Shelf number)
yes (RO-SC) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
No default
slotNumber
(Slot number)
yes (RO-SC) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
RNC object descriptions AC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-9
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
providingService
Default: notSupported
suState no (RO) The state of thesoftware-upgrade process.
sUINVALIDSTATE
(Software update state) dOWNLOADIN-PROGRESS
dOWNLOADCOM-PLETE
dOWNLOADFAILED
iNSTALL-INPROGRESS
iNSTALLCOMPLETE
iNSTALLFAILED
sWITCHOVERIN-PROGRESS
aCTIVATEIN-PROGRESS
aCTIVATECOMPLETE
aCTIVATEFAILED
pARTIALLYACTI-VATED
fALLBACKIN-PROGRESS
fALLBACKCOM-PLETE
fALLBACKFAILED
pARTIALFALLBACK
aBORTED
lOCKINPROGRESS
lOCKCOMPLETE
lOCKFAILED
uNLOCKIN-PROGRESS
uNLOCKCOMPLETE
RNC object descriptions AC
...................................................................................................................................................................................................................................
2-10 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
uNLOCKFAILED
cHECKINPROGRESS
cHECKCOMPLETE
cHECKFAILED
gRRESTART
cOMMITIN-PROGRESS
cOMMITFAILED
cOMMITCOMPLETE
bACKOUTIN-PROGRESS
bACKOUTFAILED
bACKOUTCOM-PLETE
pARTIALLY-BACKOUT
dOWNLOAD-ABORTED
iNSTALLABORTED
aCTIVATEABORTED
fALLBACKABORTED
bACKOUTABORTED
dELETEINPROGRESS
dELETECOMPLETE
dELETEFAILED
nOTUPGRADED
aCTCOMPTPUPAR-TIALACT
bACKCOMPTPUPAR-TIALBACK
fBACKCOMPTPU-PARTIALFBACK
aCTCOMPESCNO-TUPGRADED
RNC object descriptions AC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-11
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
bACKCOMPESCNO-TUPGRADED
fBACKCOMPESCNO-TUPGRADED
aCTCOMPACNOTUP-GRADED
bACKCOMPACNO-TUPGRADED
fBACKCOMPACNO-TUPGRADED
aPPLYINPROGRESS
aPPLYCOMPLETE
aPPLYFAILED
aPPLYABORTED
dEAPPLYIN-PROGRESS
dEAPPLYCOMPLETE
dEAPPLYFAILED
dEAPPLYABORTED
uNEQP
aUTORECOVER-RESTART
fWUPDATEIN-PROGRESS
fWUPDATECOM-PLETE
fWUPDATEFAILED
fWUPDATEABORTED
Default:cHECKCOMPLETE
unitNumber
(Unit number)
no (RO-SC) The number of the hardwareunit.
-32768 through 32767step size=1
Default = 0
RNC object descriptions AC
...................................................................................................................................................................................................................................
2-12 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO-SC) Function Code, for example;UCU, UCR
0 through 52
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 52
Default = N/A
RNC object descriptions AC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-13
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ATMQOS...................................................................................................................................................................................................................................
Full name
Asynchronous transfer mode quality of service
Description
This object is a logically managed object which provides a mechanism for definingtransport network quality of service profiles. These profiles are referenced from theVirtual Channel Connection (VCC) definitions within the Iu interface profile objects.
Hierarchical location
Hierarchical location of the ATMQOS object:
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“ATMQOS” (p. A-4) in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You can create or modify this object.
The following list outlines the object constraints for deleting an ATMQOS object.
• The RNC agent automatically deletes this object when there are no longer anyreferences to it from Iu objects (Iub, Iur, Iu-cs, Iu-ps). This is whenrefListbecomes empty.
Attributes
The following attributes apply to the ATMQOS object and are available through theGUI and CLI.
LRNC
ATMQOS
RNC object descriptions
...................................................................................................................................................................................................................................
2-14 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
aal2PathSubscriptionLevel
(AAL2 path subscriptionlevel)
yes (RO-SC) The percentage ofoversubscription permittedon a particular ATMAdaptation Layer type 2(AAL2) path.
100 through 500 stepsize=1
Default = 100
aalType yes (RO-SC) The ATM Adaptation Layer(AAL) type that is allowedfor this connection.
aal2
(ATM adaptation layer type) aal5
No default
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
atmClass yes (RO-SC) The ATM service type. cbr
(ATM class) vbrRt
vbrNrt
ubr
abr
No default
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
RNC object descriptions ATMQOS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-15
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
empty
No default
cellDelayVariationTolerance
(Cell delay variationtolerance)
yes (RO-SC) The variance in cell deliverytime.
0 through 2147483647step size=1
No default
eDCHulCacSubsLevels
(E-DCH Uplink, CarrierAccess Code subscriptionlevels)
yes (RO-SC) This parameter defines theE-DCH Uplink CarrierAccess Code subscriptionlevels.
See“Structure ofATMQOS values”(p. 2-22).
Default = {100,
100,
100,
100,
100}
hSDPACongestionSum-CappedRate
yes (RO-SC) This attribute specifies thecapped HSDPA maximumrate to be used for the RateController functionality forthe sum ofall the HSDPAconnections on the PVC..
0 through 50000 stepsize=1
Default = 1000
maxBurstSize
(Maximum burst size)
yes (RO-SC) The maximum burst sizethat is allowed for this ATMservice class.
0 through 65535 stepsize=1
No default
maxCPSPacketPayloadSize
(CPS Packet Size)
no (RO-SC) This parameter defines themaximum size of an AAL2CPS-Packet payload.
1 through 64 stepsize=1
Default = 64
maxHSDPAFrameSize
(Maximum HSDPA FrameSize)
yes (RO-SC) Maximum HSDPA FrameSize in bytes.
500 through 1472 stepsize=1
Default = 1472
minCellRate
(Minimum cell rate)
yes (RO-SC) The minimum cell rate thatis permitted for this serviceclass.
0 through 2147483647step size=1
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
RNC object descriptions ATMQOS
...................................................................................................................................................................................................................................
2-16 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
peakCellRate
(Peak cell rate)
yes (RO-SC) The peak cell rate that ispermitted for this serviceclass.
0 through 2147483647step size=1
No default
pVCCongestionThreshold
(Permanent VirtualConnection upper threshold)
yes (RO-SC) This parameter indicates theupper limit in percentage ofSustainable Cell Rate of allthe PVCs using this ATMQoS Class.interactive class.
0 through 150 stepsize=1
Default = 97
refList
(Reference list)
no (RO) The Distinguished Names(DNs) of the objects thatreference this ATMquality-of-service object.
Sequenceof 0 through999 records, using thefollowing value(s):
String of characters
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
sustainedCellRate
(Sustained cell rate)
yes (RO-SC) The long-term average cellrate that is permitted for thisATM service class.
0 through 2147483647step size=1
No default
RNC object descriptions ATMQOS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-17
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
trafficClassMinimumRate
(Traffic Class MinimumRate)
yes (RO-SC) This attribute provides thevalue that specifies theminimum rate for theservice.
See“Structure ofATMQOS values”(p. 2-22).
Default = {0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0}
trafficClassSubsLevels
(Traffic class subscriptionlevels)
yes (RO-SC) Provides the value thatindicates the percentage ofoversubscription permittedby a particular BEARERQoS trafficClass within aparticular AAL2 path.
See“Structure ofATMQOS values”(p. 2-22).
Default = {100,
100,
100,
100,
100,
100,
100,
100}
umtsQosClass yes (RO-SC) The UMTS Quality ofService (QoS) class that ispermitted for this service.
notApplicable
(UMTS quality of serviceclass)
conv
strm
convAndStrm
int
RNC object descriptions ATMQOS
...................................................................................................................................................................................................................................
2-18 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
back
intAndBack
strmAndIntAndBack
convAndStrmAnd-IntAndBack
comch
comchAndConvAnd-Strm
comchAndIntAndBack
comchAndStrmAnd-IntAndBack
comchAndConvAndStr-mAndIntAndBack
Default: notApplicable
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vccUsage yes (RO-SC) Applies to PermanentVirtual Circuits (PVCs) thatare shared by differenttraffic classes. Controls useof the Virtual ChannelConnection (VCC) bypacket switched data,HSPDA data, circuitswitched data, and voicetraffic.
nOTAPPLICABLE
(Virtual channel connectionusage)
pSDATAONLY
RNC object descriptions ATMQOS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-19
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
cSDATAONLY
pSDATAANDCS-DATAONLY
vOICEONLY
vOICEANDPSDATA-ONLY
vOICEANDCSDATA-ONLY
vOICEANDCS-DATAANDPSDATA-ONLY
hSDATAONLY
hSDATAANDPSDATA-ONLY
hSDATAANDCS-DATAONLY
hSDATAANDPS-DATAANDCSDATA-ONLY
hSDATAAND-VOICEONLY
hSDATAANDVOICE-ANDPSDATAONLY
hSDATAANDVOICE-ANDCSDATAONLY
hSDATAANDVOICE-ANDCSDATAANDPS-DATA
hSUPAONLY
hSUPAANDPSDATA-ONLY
hSUPAANDCSDATA-ONLY
hSUPAANDPS-DATAANDCSDATA-ONLY
RNC object descriptions ATMQOS
...................................................................................................................................................................................................................................
2-20 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
hSUPAAND-VOICEONLY
hSUPAANDVOICE-ANDPSDATAONLY
hSUPAANDVOICE-ANDCSDATAONLY
hSUPAANDVOICE-ANDCSDATAANDPS-DATAONLY
hSDPAONLY
hSDPAANDPSDATA-ONLY
hSDPAANDCSDATA-ONLY
hSDPAANDPS-DATAANDCSDATA-ONLY
hSDPAAND-VOICEONLY
hSDPAANDVOICE-ANDPSDATAONLY
hSDPAANDVOICE-ANDCSDATAONLY
hSDPAANDVOICE-ANDCSDATAANDPS-DATAONLY
aLLSERVICES
Default:nOTAPPLICABLE
RNC object descriptions ATMQOS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-21
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
wMBwdSubsLevels
(Weighted mean backwardsubscription level)
yes (RO-SC) This attribute provides afigure to be used for ULPVC CAC.
See“Structure ofATMQOS values”(p. 2-22).
Default = {100,
100,
100,
100,
100,
100,
100,
100,
100}
wMFwdSubsLevels
(Weighted mean forwardsubscription level)
yes (RO-SC) This provides the ratecontrollers and CallAdmission Controls with afigure for non-ratecontrolled traffic classes.For example, signalling,voice, AND for weightedbandwidth allocation forhandover traffic (Interactive,Background and so on) fromthe IuR destined for IuBPVC.
See“Structure ofATMQOS values”(p. 2-22).
Default = {100,
100,
100,
100,
100,
100,
100,
100,
100}
Structure of ATMQOS values
The following table describes the value format used for the ATMQOS object attribute.
Attribute Sequence of structure Values
eDCHulCacSubsLevels dcchSig 100 through 10000 step size=5
int1 100 through 10000 step size=5
int2 100 through 10000 step size=5
int3 100 through 10000 step size=5
back 100 through 10000 step size=5
RNC object descriptions ATMQOS
...................................................................................................................................................................................................................................
2-22 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
trafficClassMinimum-Rate
dchInt1 0 through 1000 step size=1
dchInt2 0 through 1000 step size=1
dchInt3 0 through 1000 step size=1
dchBack 0 through 1000 step size=1
edchInt1 0 through 1000 step size=1
edchInt2 0 through 1000 step size=1
edchInt3 0 through 1000 step size=1
edchBack 0 through 1000 step size=1
hsdInt1 0 through 1000 step size=1
hsdInt2 0 through 1000 step size=1
hsdInt3 0 through 1000 step size=1
hsdBack 0 through 1000 step size=1
trafficClassSubsLevels dchInt1 100 through 15000 step size=1
dchInt2 100 through 15000 step size=1
dchInt3 100 through 15000 step size=1
dchBack 100 through 15000 step size=1
hsdInt1 100 through 15000 step size=1
hsdInt2 100 through 15000 step size=1
hsdInt3 100 through 15000 step size=1
hsdBack 100 through 15000 step size=1
wMBwdSubsLevels dcchSig 100 through 500 step size=1
voice 100 through 500 step size=1
convNonVoice 100 through 500 step size=1
comCh 100 through 500 step size=1
strm 100 through 500 step size=1
int1 100 through 500 step size=1
int2 100 through 500 step size=1
int3 100 through 500 step size=1
back 100 through 500 step size=1
wMFwdSubsLevels dcchSig 100 through 500 step size=1
voice 100 through 500 step size=1
RNC object descriptions ATMQOS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-23
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
convNonVoice 100 through 500 step size=1
comCh 100 through 500 step size=1
strm 100 through 500 step size=1
int1 100 through 500 step size=1
int2 100 through 500 step size=1
int3 100 through 500 step size=1
back 100 through 500 step size=1
RNC object descriptions ATMQOS
...................................................................................................................................................................................................................................
2-24 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Cabinet...................................................................................................................................................................................................................................
Full name
Cabinet
Description
This object represents the physical Radio Network Controller (RNC) cabinet. The RNCobject can be contained in one single cabinet or a number of cabinets.
Hierarchical location
Hierarchical location of the Cabinet object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the Cabinet object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
LRNC
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-25
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
cabinetMulticastIPAddress
(Cabinet multicast IPaddress)
no (RO) Cabinet multicast IP addressneeded to broadcast a failureof the Ethernet Switch Card(ESC) on other shelves orframes.
String of characters
Default =239.192.100.191
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions Cabinet
...................................................................................................................................................................................................................................
2-26 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
CellSP...................................................................................................................................................................................................................................
Full name
Cell service profile
Description
This object defines cell service profiles for Transport Format Sets (TFSs) and TransportFormat Combination Sets (TFCSs). Each LCell must have a pointer to this object toenable TFS and TFCS selection for its common channels.
The CellSP object is a physical object and is automatically created as part of a newRNC object.
Hierarchical location
Hierarchical location of the CellSP object:
Object constraints and supported actions
You cannot create or delete this object, it is pre-configured in for each service profile.
You can modify this object.
Attributes
The following attributes apply to the CellSP object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
LRNC
CellSP
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-27
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
profileName
(Profile name)
no (RW) A descriptive name for thisCell Service Profile(CellSP).
0 through 100
Default = N/A
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions CellSP
...................................................................................................................................................................................................................................
2-28 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions CellSP
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-29
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
CICC...................................................................................................................................................................................................................................
Full name
Common intelligent carrier card
Description
This object represents a Common Intelligent Carrier Card (CICC) in theFlexent®
Blade Platform (FBP) shelf.
Hierarchical location
Hierarchical location of the CICC object:
Object constraints and supported actions
You can modify this object.
The following list outlines the object constraints for diagnosing a CICC object usingthe diagnose command:
• Make sure thatadministrativeState is set to locked or thatoperationalStateis set to disabled and theavailabilityStatus contains an element that is set todependency.
Attributes
The following attributes apply to the CICC object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: locked
CICC
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................
2-30 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 52
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 52
Default = N/A
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 52
Default = N/A
dateOfManufacture
(Inventory unit build date)
no (RO) Date of Manufacture ofinventory unit.
0 through 52
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 52
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
RNC object descriptions CICC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-31
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
manufacturerData
(Manufacturer identity ofthe inventory unit)
no (RO) Manufacturer specific dataof the inventory unit.
0 through 52
Default = N/A
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 52
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 52
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 52
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
RNC object descriptions CICC
...................................................................................................................................................................................................................................
2-32 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
providingService
Default: notSupported
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
-32768 through 32767step size=1
Default = 0
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 52
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 52
Default = N/A
RNC object descriptions CICC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-33
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
CICCBPEtherPort...................................................................................................................................................................................................................................
Full name
Common intelligent carrier card backplane ethernet port
Description
This object represents an Ethernet port on the backplane of a Common IntelligentCarrier Card (CICC) in theFlexent® Blade Platform (FBP) shelf.
Hierarchical location
Hierarchical location of the CICCBPEtherPort object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the CICCBPEtherPort object and are availablethrough the GUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
CICC
CICCBPEtherPort
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................
2-34 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions CICCBPEtherPort
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-35
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions CICCBPEtherPort
...................................................................................................................................................................................................................................
2-36 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
CICCProc...................................................................................................................................................................................................................................
Full name
Common intelligent carrier card processor
Description
This object represents a processor on the Common Intelligent Carrier Card (CICC) inthe Flexent® Blade Platform (FBP) shelf.
Hierarchical location
Hierarchical location of the CICCProc object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the CICCProc object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
CICC
CICCProc
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-37
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
cProcPersonality no (RO) The personality of eachprocessor on the CommonIntelligent Carrier Card(CICC).
cP
(Common intelligent carriercard processor personality)
sP
tP
Default: cP
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
suState no (RO) The state of thesoftware-upgrade process.
sUINVALIDSTATE
RNC object descriptions CICCProc
...................................................................................................................................................................................................................................
2-38 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(Software update state) dOWNLOADIN-PROGRESS
dOWNLOADCOM-PLETE
dOWNLOADFAILED
iNSTALL-INPROGRESS
iNSTALLCOMPLETE
iNSTALLFAILED
sWITCHOVERIN-PROGRESS
aCTIVATEIN-PROGRESS
aCTIVATECOMPLETE
aCTIVATEFAILED
pARTIALLYACTI-VATED
fALLBACKIN-PROGRESS
fALLBACKCOM-PLETE
fALLBACKFAILED
pARTIALFALLBACK
aBORTED
lOCKINPROGRESS
lOCKCOMPLETE
lOCKFAILED
uNLOCKIN-PROGRESS
uNLOCKCOMPLETE
uNLOCKFAILED
cHECKINPROGRESS
cHECKCOMPLETE
cHECKFAILED
RNC object descriptions CICCProc
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-39
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
gRRESTART
cOMMITIN-PROGRESS
cOMMITFAILED
cOMMITCOMPLETE
bACKOUTIN-PROGRESS
bACKOUTFAILED
bACKOUTCOM-PLETE
pARTIALLY-BACKOUT
dOWNLOAD-ABORTED
iNSTALLABORTED
aCTIVATEABORTED
fALLBACKABORTED
bACKOUTABORTED
dELETEINPROGRESS
dELETECOMPLETE
dELETEFAILED
nOTUPGRADED
aCTCOMPTPUPAR-TIALACT
bACKCOMPTPUPAR-TIALBACK
fBACKCOMPTPU-PARTIALFBACK
aCTCOMPESCNO-TUPGRADED
bACKCOMPESCNO-TUPGRADED
fBACKCOMPESCNO-TUPGRADED
RNC object descriptions CICCProc
...................................................................................................................................................................................................................................
2-40 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
aCTCOMPACNOTUP-GRADED
bACKCOMPACNO-TUPGRADED
fBACKCOMPACNO-TUPGRADED
aPPLYINPROGRESS
aPPLYCOMPLETE
aPPLYFAILED
aPPLYABORTED
dEAPPLYIN-PROGRESS
dEAPPLYCOMPLETE
dEAPPLYFAILED
dEAPPLYABORTED
uNEQP
aUTORECOVER-RESTART
fWUPDATEIN-PROGRESS
fWUPDATECOM-PLETE
fWUPDATEFAILED
fWUPDATEABORTED
Default:cHECKCOMPLETE
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions CICCProc
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-41
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions CICCProc
...................................................................................................................................................................................................................................
2-42 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
EDCH...................................................................................................................................................................................................................................
Full name
Enhanced Dedicated Channel
Description
This class contains data related to the configuration of the E-DCH resources within theUTRAN. If E-DCH resources are not required in a cell then no object needs to becreated.
Hierarchical location
Hierarchical location of the EDCH object:
Object constraints and supported actions
You can create, delete or modify this object.
Before creating an EDCH object ensure that the parent LCell object is in locked state.
Before deleting an EDCH object ensure that it is in locked state.
Attributes
The following attributes apply to the EDCH object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: locked
LRNC
L odeN B
EDCH
L ellC
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-43
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
eAGCHcodes
(eAGCH channelisationcodes)
yes (RO-SC) Structure of E-AGCH codes,SF256, used for scheduling.
Sequenceof 1 through3 records, using thefollowing value(s):
0 through 255 stepsize=1
No default
eHICHRGCHcodes
(E-HICH and E-RGCHchannelisation codes)
yes (RO-SC) Structure of E-HICH andE-RGCH codes, SF128.
Sequenceof 1 through8 records, using thefollowing value(s):
0 through 127 stepsize=1
No default
maxEdchUsersPerCell
(Maximum E-DCH UsersPer Cell)
no (RW) Maximum number ofconcurrent users that theRNC will attempt to assignto an E-DCH channel on aCell of a NodeB.
0 through 30 stepsize=1
Default = 30
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
RNC object descriptions EDCH
...................................................................................................................................................................................................................................
2-44 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
targetNonServingToTotalED-CHPwrRatio
(Target Non-serving E-DCHto Total E-DCH PowerRatio)
no (RW) This attribute indicates thetarget ratio of the receivedE-DCH power fromnon-serving UEs to thereceived total E-DCHpower.
0 through 100 stepsize=1
Default = 25
targetULNoiseRise
(E-DCH target uplink noiserise)
no (RW) This is the value which theE-DCH scheduler will takeas the upper limit.
0 through 50 stepsize=1
Default = 15
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions EDCH
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-45
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ESC...................................................................................................................................................................................................................................
Full name
Ethernet switch card
Description
This object represents an Ethernet Switch Card (ESC) in theFlexent® Blade Platform(FBP) shelf.
The ESCs provide internal and external Ethernet connectivity. Two ESCs are used ineach cPSB shelf.
Hierarchical location
Hierarchical location of the ESC object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the ESC object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: locked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 52
Default = N/A
LRNC
FBPShelf
Cabinet
ESC
RNC object descriptions
...................................................................................................................................................................................................................................
2-46 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 52
Default = N/A
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 52
Default = N/A
currentSoftwareVersion
(Current software version)
no (RO) The version of the softwarethat is currently running onthe related component.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
dateOfManufacture
(Inventory unit build date)
no (RO) Date of Manufacture ofinventory unit.
0 through 52
Default = N/A
RNC object descriptions ESC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-47
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 52
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
yes (RO-SC) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
manufacturerData
(Manufacturer identity ofthe inventory unit)
no (RO) Manufacturer specific dataof the inventory unit.
0 through 52
Default = N/A
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 52
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 52
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 52
Default = N/A
shelfNumber
(Shelf number)
yes (RO-SC) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
No default
RNC object descriptions ESC
...................................................................................................................................................................................................................................
2-48 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
slotNumber
(Slot number)
yes (RO-SC) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
suState no (RO) The state of thesoftware-upgrade process.
sUINVALIDSTATE
(Software update state) dOWNLOADIN-PROGRESS
dOWNLOADCOM-PLETE
dOWNLOADFAILED
iNSTALL-INPROGRESS
iNSTALLCOMPLETE
iNSTALLFAILED
sWITCHOVERIN-PROGRESS
aCTIVATEIN-PROGRESS
aCTIVATECOMPLETE
aCTIVATEFAILED
pARTIALLYACTI-VATED
fALLBACKIN-PROGRESS
fALLBACKCOM-PLETE
fALLBACKFAILED
pARTIALFALLBACK
RNC object descriptions ESC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-49
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
aBORTED
lOCKINPROGRESS
lOCKCOMPLETE
lOCKFAILED
uNLOCKIN-PROGRESS
uNLOCKCOMPLETE
uNLOCKFAILED
cHECKINPROGRESS
cHECKCOMPLETE
cHECKFAILED
gRRESTART
cOMMITIN-PROGRESS
cOMMITFAILED
cOMMITCOMPLETE
bACKOUTIN-PROGRESS
bACKOUTFAILED
bACKOUTCOM-PLETE
pARTIALLY-BACKOUT
dOWNLOAD-ABORTED
iNSTALLABORTED
aCTIVATEABORTED
fALLBACKABORTED
bACKOUTABORTED
dELETEINPROGRESS
dELETECOMPLETE
dELETEFAILED
nOTUPGRADED
RNC object descriptions ESC
...................................................................................................................................................................................................................................
2-50 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
aCTCOMPTPUPAR-TIALACT
bACKCOMPTPUPAR-TIALBACK
fBACKCOMPTPU-PARTIALFBACK
aCTCOMPESCNO-TUPGRADED
bACKCOMPESCNO-TUPGRADED
fBACKCOMPESCNO-TUPGRADED
aCTCOMPACNOTUP-GRADED
bACKCOMPACNO-TUPGRADED
fBACKCOMPACNO-TUPGRADED
aPPLYINPROGRESS
aPPLYCOMPLETE
aPPLYFAILED
aPPLYABORTED
dEAPPLYIN-PROGRESS
dEAPPLYCOMPLETE
dEAPPLYFAILED
dEAPPLYABORTED
uNEQP
aUTORECOVER-RESTART
fWUPDATEIN-PROGRESS
fWUPDATECOM-PLETE
fWUPDATEFAILED
RNC object descriptions ESC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-51
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
fWUPDATEABORTED
Default:cHECKCOMPLETE
unitNumber
(Unit number)
no (RO-SC) The number of the hardwareunit.
-32768 through 32767step size=1
Default = 0
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO-SC) Function Code, for example;UCU, UCR
0 through 52
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 52
Default = N/A
RNC object descriptions ESC
...................................................................................................................................................................................................................................
2-52 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ESCBPEtherPort...................................................................................................................................................................................................................................
Full name
Ethernet switch card backplane ethernet port
Description
This object represents an Ethernet port on the backplane of an Ethernet Switch Card(ESC) in theFlexent® Blade Platform (FBP) shelf.
The ESCs provide internal and external Ethernet connectivity. Two ESCs are used ineach cPSB shelf.
Hierarchical location
Hierarchical location of the ESCBPEtherPort object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the ESCBPEtherPort object and are available throughthe GUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
ESC
ESCBPEtherPort
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-53
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions ESCBPEtherPort
...................................................................................................................................................................................................................................
2-54 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions ESCBPEtherPort
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-55
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ESCFAEtherPort...................................................................................................................................................................................................................................
Full name
Ethernet switch card front access ethernet port
Description
This object represents an Ethernet port on the front panel of an Ethernet Switch Card(ESC) in theFlexent® Blade Platform (FBP) shelf.
The ESCs provide internal and external Ethernet connectivity. Two ESCs are used ineach cPSB shelf.
Hierarchical location
Hierarchical location of the ESCFAEtherPort object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the ESCFAEtherPort object and are available throughthe GUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
ESC
ESCFAEtherPort
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................
2-56 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions ESCFAEtherPort
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-57
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions ESCFAEtherPort
...................................................................................................................................................................................................................................
2-58 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ESCProc...................................................................................................................................................................................................................................
Full name
Ethernet switch card processor
Description
This object represents a processor on the Ethernet Switch Card (ESC) in theFlexent®
Blade Platform (FBP) shelf.
Hierarchical location
Hierarchical location of the ESCProc object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the ESCProc object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
ESC
ESCProc
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-59
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions ESCProc
...................................................................................................................................................................................................................................
2-60 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions ESCProc
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-61
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ExtAlmBox...................................................................................................................................................................................................................................
Full name
External alarm box
Description
This object allows the control of an external alarm box connected to an RNC.
This object represents a physical object and is automatically created as part of a newRNC object.
Hierarchical location
Hierarchical location of the ExtAlmBox object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the ExtAlmBox object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 52
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 52
Default = N/A
LRNC
ExtAlmBox
RNC object descriptions
...................................................................................................................................................................................................................................
2-62 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 52
Default = N/A
dateOfManufacture
(Inventory unit build date)
no (RO) Date of Manufacture ofinventory unit.
0 through 52
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 52
Default = N/A
externalAlarms
(External alarms)
yes (RW) The specific characteristicsof each external alarm thatis connected to thisinput/output unit.
Sequenceof 32records, using thefollowing value(s):
See“Structure ofExtAlmBox values”(p. 2-65).
Default is an emptysequence.
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
RNC object descriptions ExtAlmBox
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-63
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitId
(Inventory unit identifier)
yes (RO-SC) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
manufacturerData
(Manufacturer identity ofthe inventory unit)
no (RO) Manufacturer specific dataof the inventory unit.
0 through 52
Default = N/A
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 52
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
pollingInterval
(Polling interval)
no (RW) The polling interval that isapplicable for this externalalarm box.
5 through 1800 stepsize=1
Default = 5
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 52
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 52
Default = N/A
shelfNumber
(Shelf number)
yes (RO-SC) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
No default
slotNumber
(Slot number)
yes (RO-SC) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
No default
RNC object descriptions ExtAlmBox
...................................................................................................................................................................................................................................
2-64 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unitNumber
(Unit number)
no (RO-SC) The number of the hardwareunit.
-32768 through 32767step size=1
Default = 0
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO-SC) Function Code, for example;UCU, UCR
0 through 52
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 52
Default = N/A
Structure of ExtAlmBox values
The following table describes the value format used for the ExtAlmBox objectattribute.
RNC object descriptions ExtAlmBox
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-65
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
externalAlarms portNumber 1 through 32 step size=1
enabled yes
no
externalAlarms activeState eASNA
eASOPEN
eASCLOSE
RNC object descriptions ExtAlmBox
...................................................................................................................................................................................................................................
2-66 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
FanTray...................................................................................................................................................................................................................................
Full name
Fan tray
Description
This object represents the fan tray in aFlexent® Blade Platform (FBP) shelf.
Each tray contains three fans, a control board, and a status LED. This combination ofthree trays with three fans each provides cooling for the entire shelf.
Hierarchical location
Hierarchical location of the FanTray object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the FanTray object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 52
Default = N/A
LRNC
FBPShelf
FanTray
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-67
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 52
Default = N/A
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 52
Default = N/A
dateOfManufacture
(Inventory unit build date)
no (RO) Date of Manufacture ofinventory unit.
0 through 52
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 52
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
RNC object descriptions FanTray
...................................................................................................................................................................................................................................
2-68 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitId
(Inventory unit identifier)
yes (RO-SC) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
manufacturerData
(Manufacturer identity ofthe inventory unit)
no (RO) Manufacturer specific dataof the inventory unit.
0 through 52
Default = N/A
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 52
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 52
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 52
Default = N/A
shelfNumber
(Shelf number)
yes (RO-SC) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
No default
slotNumber
(Slot number)
yes (RO-SC) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
RNC object descriptions FanTray
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-69
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
providingService
Default: notSupported
unitNumber
(Unit number)
no (RO-SC) The number of the hardwareunit.
-32768 through 32767step size=1
Default = 0
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO-SC) Function Code, for example;UCU, UCR
0 through 52
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 52
Default = N/A
RNC object descriptions FanTray
...................................................................................................................................................................................................................................
2-70 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
FBPShelf...................................................................................................................................................................................................................................
Full name
Flexent® bladeplatform shelf
Description
This object represents the equipment holder for the primary Compact Packet SwitchBackplane (cPSB) components.
Hierarchical location
Hierarchical location of the FBPShelf object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the FBPShelf object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 52
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 52
Default = N/A
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-71
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 52
Default = N/A
dateOfManufacture
(Inventory unit build date)
no (RO) Date of Manufacture ofinventory unit.
0 through 52
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 52
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
yes (RO-SC) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions FBPShelf
...................................................................................................................................................................................................................................
2-72 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
manufacturerData
(Manufacturer identity ofthe inventory unit)
no (RO) Manufacturer specific dataof the inventory unit.
0 through 52
Default = N/A
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 52
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 52
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 52
Default = N/A
shelfNumber
(Shelf number)
yes (RO-SC) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
No default
slotNumber
(Slot number)
yes (RO-SC) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unitNumber
(Unit number)
no (RO-SC) The number of the hardwareunit.
-32768 through 32767step size=1
Default = 0
RNC object descriptions FBPShelf
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-73
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO-SC) Function Code, for example;UCU, UCR
0 through 52
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 52
Default = N/A
RNC object descriptions FBPShelf
...................................................................................................................................................................................................................................
2-74 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
FddExtCell...................................................................................................................................................................................................................................
Full name
Frequency division duplex external cell
Description
This object represents an adjacent cell relationship between an LCell object of theLRNC and another non-managed UTRAN FDD cell. The external cell may or may nothave a relationship with a PRNC object.
Hierarchical location
Hierarchical location of the FddExtCell object:
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“FddExtCell” (p. A-4) in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an FddExtCell object.
• Make sure that the SACS object referenced byfDDExtCellRefSACS exists.
• Make sure that the SAPS object referenced byfDDExtCellRefSAPS exists.
• Make sure that the RA object referenced byfDDExtCellRefRA exists.
• Make sure that the URA object referenced byfDDExtCellRefURA exists.
• Make sure that the GsmExtCell objects referenced byoutFddExtToGsmCellsDahoexist.
Attributes
The following attributes apply to the FddExtCell object and are available through theGUI and CLI.
LRNC
FddExtCell
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-75
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
borderCellToGsm
(Border cell to Gsm flag)
no (RW) Marks a cell as a border cellof the UMTS network to aGSM network.
true
false
Default = false
compressedModeInterRat
(Compressed mode forinter-RAT measurements)
no (RW) The parameter defineswhether the use of thecompressed mode is allowedin the cell for inter-RATmeasurements.
true
false
Default = true
fDDExtCellRefLA
(Cell location area)
yes (RW) Location Area that this cellbelongs to.
String of characters
No default
RNC object descriptions FddExtCell
...................................................................................................................................................................................................................................
2-76 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
fDDExtCellRefRA
(FDD external cell referencerouting area)
yes (RW) The Distinguished Name(DN) of the Routing Area(RA) object that isassociated with thisneighboring cell.
String of characters
No default
fDDExtCellRefSACS
(FDD external cell referenceto the service area circuitswitch)
yes (RW) The Distinguished Name(DN) of the Service AreaCircuit Switch (SACS)object that is associatedwith this neighboring cell.
String of characters
No default
fDDExtCellRefSAPS
(FDD external cell referenceto the service area packetswitch)
yes (RW) The Distinguished Name(DN) of the Service AreaPacket Switch (SAPS)object that is associatedwith this neighboring cell.
String of characters
No default
inAdjCells
(Incoming adjacent cells)
no (RO) The Distinguished Names(DNs) of the incomingadjacent cells that arerelated to this object.
Sequenceof 0 through9999 records, using thefollowing value(s):
String of characters
No default
inInterFreqFddAdjCells
(Incoming Inter-FrequencyCell Reselection relations)
no (RO) Incoming relations fromUTRAN Cells forInter-Frequency CellReselection and MobileAssisted Handover(ifCrsMaho).
Sequenceof 0 through9999 records, using thefollowing value(s):
String of characters
No default
inInterFreqFddAdjCells-Daho
(Incoming UTRAN cellrelations)
no (RO) Incoming relations fromUTRAN Cells for InterFrequency Database AssistedHandover (ifDaho).
Sequenceof 0 through9999 records, using thefollowing value(s):
String of characters
No default
interFreqBorderCellToFDD
(Inter frequency FDD bordercell)
no (RW) Marks a cell as a border cellto another FDD frequency.
true
false
Default = false
interFreqCompressedMode
(Compressed ModeInter-frequency)
no (RW) Enables the use ofcompressed mode forinter-frequencymeasurements per cell.
true
false
Default = true
RNC object descriptions FddExtCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-77
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
logicalCellId
(Logical cell identity)
yes (RW) The Logical Cell Identity(C-Id) is used as a uniqueidentifier of a logical cell(LCell) that is controlled bythe RNC.
0 through 65535 stepsize=1
No default
marketLabel
(Market label)
no (RW) Label being used to identifymarket of the FddExtCell,GsmExtCell, LCell, LNodeBand LRNC objects inplanning tools.
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
measurementQuantityInter-RATCCO
no (RW) This parameter is used forinter-RAT Cell ChangeOrder from UTRAN to GSMfor PS connections. Itdetermines the quantity tobe used for measurements ofthe UMTS frequency.
rSCP
(Inter-RAT Cell ChangeOrder measurementquantity)
eCN0
rSCP_ECN0
Default: rSCP_ECN0
measurementQuantityIn-terRATHHO
no (RW) This parameter is used forinter-RAT hard handoverfrom UTRAN to GSM. Itdetermines the quantity tobe used for measurements ofthe UMTS frequency.
rSCP
(Inter-RAT hard handovermeasurement quantity)
eCN0
rSCP_ECN0
Default: rSCP_ECN0
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
RNC object descriptions FddExtCell
...................................................................................................................................................................................................................................
2-78 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default: enabled
pCPICHPower
(Primary common pilotchannel power)
yes (RW) Primary Common PilotChannel (P-CPICH)downlink power.
-10.0 through 50.0 stepsize=0.1
Default = 33.0
primaryScramblingCode
(Primary scrambling code)
yes (RW) The primary scramblingcode that is used for thiscell which is not controlledby the LRNC.
0 through 511 stepsize=1
No default
readSFNIndicator
(Read system frame numberindicator)
yes (RW) Indicates to the UE whetherthe UE has to decode theSystem Frame Number(SFN) of the cell.
true
false
Default = true
rNCId
(RNC identity)
yes (RW) The unique identifier of anRNC node within aUniversal Terrestrial RadioAccess Network (UTRAN)is the RNC Identifier(RNC-Id).
0 through 4095 stepsize=1
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
uARFCNNd
(UTRA absolute radiofrequency channel numberdownlink)
yes (RW) This absolute numberrepresents the frequency thatis used in the downlinkdirection.
0 through 16383 stepsize=1
No default
uARFCNNu
(UTRA absolute radiofrequency channel numberuplink)
no (RO) This absolute numberrepresents the frequency thatis used in the uplinkdirection.
0 through 16383 stepsize=1
Default = 0
RNC object descriptions FddExtCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-79
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
umts2GsmCCOQActCM2D
(UMTS to GSM CellChange Order activatecompressed mode)
no (RW) Defines the measurementcriteria for activation ofcompressed mode for CellChange Order from UMTSto GSM.
See“Structure ofFddExtCell values”(p. 2-82).
Default = {-111,
-16,
tIMETOTRIGGER_320}
umts2GsmCCOQDeactCM2F
(UMTS to GSM CellChange Order deactivatecompressed mode)
no (RW) Defines the measurementcriteria for deactivation ofcompressed mode for CellChange Order from UMTSto GSM.
See“Structure ofFddExtCell values”(p. 2-82).
Default = {-108,
-13,
tIMETOTRIGGER_5000}
umts2GsmCCOQTriggerDAHO
(UMTS to GSM CellChange Order trigger(DAHO))
no (RW) Defines the measurementcriteria to trigger CellChange Order from UMTSto GSM (DAHO).
See“Structure ofFddExtCell values”(p. 2-82).
Default = {-111,
-16,
tIMETOTRIGGER_320,
1.0}
umts2GsmCCOQTriggerMAHO
(UMTS to GSM CellChange Order trigger(MAHO))
no (RW) Defines the measurementcriteria to trigger CellChange Order from UMTSto GSM (MAHO).
See“Structure ofFddExtCell values”(p. 2-82).
Default = {-108,
-13,
tIMETOTRIGGER_120,
1.0}
umts2GsmQActCM2D
(UMTS to GSM activatecompressed mode)
no (RW) Contains UMTS to GSMHO measurement - UMTSquality to activatecompressed modeparameters.
See“Structure ofFddExtCell values”(p. 2-82).
Default = {-16,
-111,
tIMETOTRIGGER_320}
RNC object descriptions FddExtCell
...................................................................................................................................................................................................................................
2-80 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
umts2GsmQDeactCM2F
(UMTS to GSM deactivatecompressed mode)
no (RW) Contains UMTS to GSMHO measurement - UMTSquality to deactivatecompressed modeparameters.
See“Structure ofFddExtCell values”(p. 2-82).
Default = {-13,
-108,
tIMETOTRIGGER_5000}
umts2GsmQTriggerDAHO
(UMTS to GSM Trigger,DAHO)
no (RW) Contains UMTS to GSMHO measurement - UMTSquality to trigger DAHO.
See“Structure ofFddExtCell values”(p. 2-82).
Default = {-16,
-111,
tIMETOTRIGGER_320,
1.0}
umts2GsmQTriggerMAHO
(UMTS to GSM Trigger,MAHO)
no (RW) Contains UMTS to GSMHO measurement - UMTSquality to trigger MAHO.
See“Structure ofFddExtCell values”(p. 2-82).
Default = {-13,
-108,
tIMETOTRIGGER_120,
1.0}
umtsFrequencyBand yes (RW) Indicates the frequency bandthat the cell supports.
bAND_I
(UMTS frequency band) bAND_II
bAND_III
bAND_IV
bAND_V
bAND_VI
bAND_VIII
bAND_IX
Default: bAND_I
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions FddExtCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-81
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of FddExtCell values
The following table describes the value format used for the FddExtCell object attribute.
Attribute Sequence of structure Values
umts2GsmCCOQActCM2DrSCPThreshold -115 through -25 step size=1
eCN0Threshold -24 through 0 step size=1
umts2GsmCCOQActCM2DtimeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
umts2GsmCCOQDeactCM2FrSCPThreshold -115 through -25 step size=1
eCN0Threshold -24 through 0 step size=1
RNC object descriptions FddExtCell
...................................................................................................................................................................................................................................
2-82 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
umts2GsmCCOQDeactCM2FtimeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
umts2GsmCCOQTriggerDAHOrSCPThreshold -115 through -25 step size=1
eCN0Threshold -24 through 0 step size=1
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
RNC object descriptions FddExtCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-83
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
weight 0.0 through 2.0 step size=0.1
umts2GsmCCOQTriggerMAHOrSCPThreshold -115 through -25 step size=1
eCN0Threshold -24 through 0 step size=1
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
weight 0.0 through 2.0 step size=0.1
umts2GsmQActCM2D eCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
umts2GsmQActCM2D timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
RNC object descriptions FddExtCell
...................................................................................................................................................................................................................................
2-84 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
umts2GsmQDeactCM2F eCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
umts2GsmQDeactCM2F timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
umts2GsmQTriggerDAHOeCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
RNC object descriptions FddExtCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-85
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
weight 0.0 through 2.0 step size=0.1
umts2GsmQTriggerMAHOeCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
weight 0.0 through 2.0 step size=0.1
RNC object descriptions FddExtCell
...................................................................................................................................................................................................................................
2-86 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
GICC...................................................................................................................................................................................................................................
Full name
Gateway intelligent carrier card
Description
This object represents a network processor based Gateway Intelligent Carrier Card(GICC), in the Compact Packet Switch Backplane (cPSB) shelf.
The GICC blade provides the interface of the RNC to the external world.
Hierarchical location
Hierarchical location of the GICC object:
Object constraints and supported actions
You can modify this object.
The following are the object constraints for diagnosing a GICC object using thediagnose command:
• Make sure thatadministrativeState is set to locked or thatoperationalStateis set to disabled and theavailabilityStatus contains an element that is set todependency.
Attributes
The following attributes apply to the GICC object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
GICC
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-87
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default: locked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 52
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 52
Default = N/A
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 52
Default = N/A
dateOfManufacture
(Inventory unit build date)
no (RO) Date of Manufacture ofinventory unit.
0 through 52
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 52
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
RNC object descriptions GICC
...................................................................................................................................................................................................................................
2-88 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitId
(Inventory unit identifier)
yes (RO-SC) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
manufacturerData
(Manufacturer identity ofthe inventory unit)
no (RO) Manufacturer specific dataof the inventory unit.
0 through 52
Default = N/A
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 52
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
refGICCPair
(Reference gatewayintelligent controller cardpair)
no (RO) The Distinguished Name(DN) of the GICCPairobject to which thisGateway IntelligentController Card (GICC)belongs.
String of characters
No default
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 52
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 52
Default = N/A
shelfNumber
(Shelf number)
yes (RO-SC) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
No default
RNC object descriptions GICC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-89
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
slotNumber
(Slot number)
yes (RO-SC) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unitNumber
(Unit number)
no (RO-SC) The number of the hardwareunit.
-32768 through 32767step size=1
Default = 0
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO-SC) Function Code, for example;UCU, UCR
0 through 52
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 52
Default = N/A
RNC object descriptions GICC
...................................................................................................................................................................................................................................
2-90 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
GICCBPEtherPort...................................................................................................................................................................................................................................
Full name
Gateway intelligent carrier card backplane ethernet port
Description
This object represents an Ethernet port on the backplane of a Gateway IntelligentCarrier Card (GICC) in the Compact Packet Switch Backplane (cPSB) shelf.
The GICC blade provides the interface of the RNC to the external world.
Hierarchical location
Hierarchical location of the GICCBPEtherPort object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the GICCBPEtherPort object and are availablethrough the GUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
GICC
GICCBPEtherPort
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-91
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions GICCBPEtherPort
...................................................................................................................................................................................................................................
2-92 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions GICCBPEtherPort
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-93
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
GICCFAEtherPort...................................................................................................................................................................................................................................
Full name
Gateway intelligent carrier card front access ethernet port
Description
This object represents an Ethernet port on the front access panel of a GatewayIntelligent Carrier Card (GICC) in the Compact Packet Switch Backplane (cPSB) shelf.
The GICC blade provides the interface of the RNC to the external world.
Hierarchical location
Hierarchical location of the GICCFAEtherPort object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the GICCFAEtherPort object and are availablethrough the GUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
GICC
GICCFAEtherPort
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................
2-94 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions GICCFAEtherPort
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-95
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions GICCFAEtherPort
...................................................................................................................................................................................................................................
2-96 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
GICCPair...................................................................................................................................................................................................................................
Full name
Gateway intelligent carrier card pair
Description
This object represents a pair of Gateway Intelligent Carrier Cards (GICCs) in theCompact Packet Switch Backplane (cPSB) shelf.
The GICC blade provides the interface of the RNC to the external world.
Hierarchical location
Hierarchical location of the GICCPair object:
Object constraints and supported actions
You can modify this object.
The following list outlines the object constraints for modifying a GICCPair objectusing theset command:
• The attributegICCs can not be updated as part of aset request.
• For GICCPair 1 ensure that the value ofhostMulticastIPAddress is239.192.100.011.
• For GICCPair 2 ensure that the value ofhostMulticastIPAddress is239.192.100.012.
• For GICCPair 1 ensure that the value ofnpMulticastIPAddress is239.192.100.111.
• For GICCPair 2 ensure that the value ofnpMulticastIPAddress is239.192.100.112.
Attributes
The following attributes apply to the GICCPair object and are available through theGUI and CLI.
GICCPair
LRNC
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-97
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
gICCs
(Gateway intelligent carriercards)
yes (RO-SC) A sequence of GatewayIntelligent Carrier Card(GICC) DistinguishedNames (DNs).
Sequenceof 1 through2 records, using thefollowing value(s):
String of characters
No default
hostMulticastIPAddress
(Host multicast IP address)
no (RO) The host multicast IPaddress of the GatewayIntelligent Carrier Card(GICC).
String of characters
Default =239.192.100.011
npMulticastIPAddress
(Network processormulticast IP address)
no (RO) The Network Processor (NP)multicast IP address of theGateway Intelligent CarrierCard (GICC).
String of characters
Default =239.192.100.111
operationalState no (RO) The operational state of themanaged object.
enabled
RNC object descriptions GICCPair
...................................................................................................................................................................................................................................
2-98 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions GICCPair
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-99
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
GICCProc...................................................................................................................................................................................................................................
Full name
Gateway intelligent carrier card processor
Description
This object represents a network processor that transports the Asynchronous TransferMode (ATM) messages across the RNC internal Ethernet network.
The GICC blade provides the interface of the RNC to the external world.
Hierarchical location
Hierarchical location of the GICCProc object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the GICCProc object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
GICC
GICCProc
LNRC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................
2-100 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
currentSoftwareVersion
(Current software version)
no (RO) The version of the softwarethat is currently running onthe related component.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
gProcPersonality yes (RO-SC) The personality of eachnetwork processor on theGateway IntelligentController Card (GICC).
nP
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
RNC object descriptions GICCProc
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-101
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
coldStandby
providingService
Default: notSupported
suState no (RO) The state of thesoftware-upgrade process.
sUINVALIDSTATE
(Software update state) dOWNLOADIN-PROGRESS
dOWNLOADCOM-PLETE
dOWNLOADFAILED
iNSTALL-INPROGRESS
iNSTALLCOMPLETE
iNSTALLFAILED
sWITCHOVERIN-PROGRESS
aCTIVATEIN-PROGRESS
aCTIVATECOMPLETE
aCTIVATEFAILED
pARTIALLYACTI-VATED
fALLBACKIN-PROGRESS
fALLBACKCOM-PLETE
fALLBACKFAILED
pARTIALFALLBACK
aBORTED
lOCKINPROGRESS
lOCKCOMPLETE
lOCKFAILED
uNLOCKIN-PROGRESS
RNC object descriptions GICCProc
...................................................................................................................................................................................................................................
2-102 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
uNLOCKCOMPLETE
uNLOCKFAILED
cHECKINPROGRESS
cHECKCOMPLETE
cHECKFAILED
gRRESTART
cOMMITIN-PROGRESS
cOMMITFAILED
cOMMITCOMPLETE
bACKOUTIN-PROGRESS
bACKOUTFAILED
bACKOUTCOM-PLETE
pARTIALLY-BACKOUT
dOWNLOAD-ABORTED
iNSTALLABORTED
aCTIVATEABORTED
fALLBACKABORTED
bACKOUTABORTED
dELETEINPROGRESS
dELETECOMPLETE
dELETEFAILED
nOTUPGRADED
aCTCOMPTPUPAR-TIALACT
bACKCOMPTPUPAR-TIALBACK
fBACKCOMPTPU-PARTIALFBACK
RNC object descriptions GICCProc
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-103
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
aCTCOMPESCNO-TUPGRADED
bACKCOMPESCNO-TUPGRADED
fBACKCOMPESCNO-TUPGRADED
aCTCOMPACNOTUP-GRADED
bACKCOMPACNO-TUPGRADED
fBACKCOMPACNO-TUPGRADED
aPPLYINPROGRESS
aPPLYCOMPLETE
aPPLYFAILED
aPPLYABORTED
dEAPPLYIN-PROGRESS
dEAPPLYCOMPLETE
dEAPPLYFAILED
dEAPPLYABORTED
uNEQP
aUTORECOVER-RESTART
fWUPDATEIN-PROGRESS
fWUPDATECOM-PLETE
fWUPDATEFAILED
fWUPDATEABORTED
Default:cHECKCOMPLETE
RNC object descriptions GICCProc
...................................................................................................................................................................................................................................
2-104 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions GICCProc
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-105
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
GICCSTM1OC3Port...................................................................................................................................................................................................................................
Full name
Gateway intelligent carrier card STM-1/OC-3 port
Description
This object represents the Gateway Intelligent Carrier Card (GICC) ATM STM-1/OC-3port that provides connection to the Asynchronous Transfer Mode (ATM) switches.
The GICC blade provides the interface of the RNC to the external world.
Hierarchical location
Hierarchical location of the GICCSTM1OC3Port object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the GICCSTM1OC3Port object and are availablethrough the GUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
GICC
GICCSTM1OC3Port
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................
2-106 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
refPG
(Reference protection group)
no (RO) The Distinguished Name(DN) of the ProtectionGroup (PG) object that isrelated to this O3S1Port.
String of characters
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions GICCSTM1OC3Port
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-107
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions GICCSTM1OC3Port
...................................................................................................................................................................................................................................
2-108 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
GsmExtCell...................................................................................................................................................................................................................................
Full name
GSM external cell
Description
This object represents an adjacent cell relationship between an LCell object of theLRNC and another GSM cell object.
Hierarchical location
Hierarchical location of the GsmExtCell object:
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“GsmExtCell” (p. A-4) in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the constraints for creating or modifying a GsmExtCellobject:
• If attribute frequencyBand = gSM-450, attributebCCHARFCN must be within therange 259 to 293.
• If attribute frequencyBand = gSM-480, attributebCCHARFCN must be within therange 306 to 340.
• If attribute frequencyBand = gSM-850, attributebCCHARFCN must be within therange 128 to 251.
• If attribute frequencyBand = gSM-900, attributebCCHARFCN must be within therange 1 to 124.
• If attribute frequencyBand = gSM-900E, attributebCCHARFCN must be within therange 0 to 124 or 975 to 1023.
LRNC
GsmExtCell
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-109
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
• If attribute frequencyBand = gSM-1800, attributebCCHARFCN must be within therange 512 to 885.
• If attribute frequencyBand = gSM-1900, attributebCCHARFCN must be within therange 512 to 810.
Attributes
The following attributes apply to the GsmExtCell object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
bCCHARFCN
(BCCH absolute radiofrequency channel number)
yes (RW) The Absolute RadioFrequency Channel Number(ARFCN) of the neighboringGSM cell.
0 through 1023 stepsize=1
No default
RNC object descriptions GsmExtCell
...................................................................................................................................................................................................................................
2-110 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
bsicVerificationRequired
(Base Station Identity Codeverification required)
no (RW) The BSIC VerificationRequired parameter defineswhether, in case of MAHO,the UE has to verify theBSIC of the GSM frequencyin order to recognize theGSM cell as valid forhandover.
true
false
Default = false
cI
(Cell identity)
yes (RW) The Cell Identity (CI)uniquely identifies the cellwithin a location area.
0 through 65535 stepsize=1
No default
frequencyBand yes (RW) Indicates how the UE/RNCshould interpret theBroadcast Control Channel(BCCH) Absolute RadioFrequency Channel Number(ARFCN) of the GSMneighboring cell.
gSM_450
(Frequency band) gSM_480
gSM_850
gSM_900
gSM_900E
gSM_1800
gSM_1900
No default
gSMBCC
(GSM Base station colorcode)
yes (RW) The Base station Color Code(BCC) of the neighboringGSM cell.
0 through 7 step size=1
No default
gSMNCC
(GSM Network color code)
yes (RW) The Network Color Code(NCC) of the neighboringGSM cell.
0 through 7 step size=1
No default
inAdjCells
(Incoming adjacent cells)
no (RO) The Distinguished Names(DNs) of the incomingadjacent cells that arerelated to this object.
Sequenceof 0 through9999 records, using thefollowing value(s):
String of characters
No default
RNC object descriptions GsmExtCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-111
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inFddToGsmCellsDaho
(Incoming GSM relationsfrom FDD to GSM cells forinter system databaseassisted handover)
no (RO) The UTRAN cells (LCell)which have a relation to thisGSM cell for the purpose ofinter system DatabaseAssisted Handover (DAHO).
Sequenceof 0 through9999 records, using thefollowing value(s):
String of characters
No default
inFddToGsmCellsDahoNQB
(Incoming Inter-Systemshandover relations)
no (RO) Incoming relations fromUTRAN Cells forInter-Systems DatabaseAssisted HandoverNon-Quality Based(isDahoNqb).
Sequenceof 0 through9999 records, using thefollowing value(s):
String of characters
No default
lAC
(Location area code)
yes (RW) Identifies a location areawithin a PLMN.
1 through 65534 stepsize=1
No default
marketLabel
(Market label)
no (RW) Label being used to identifymarket of the FddExtCell,GsmExtCell, LCell, LNodeBand LRNC objects inplanning tools.
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
maxULTxPwr
(Maximum uplink transmitpower)
yes (RW) The maximum amount ofpower that the UE isallowed to use on the GSMRandom Access Channel(RACH).
-50 through 33 stepsize=1
Default = 33
mCC
(Mobile country code)
yes (RW) Identifies the country towhich a PLMN belongs.
Sequenceof 3 records,using the followingvalue(s):
0 through 9 step size=1
No default
mNC
(Mobile network code)
yes (RW) Identifies a PLMN within acountry.
Sequenceof 2 through3 records, using thefollowing value(s):
0 through 9 step size=1
No default
RNC object descriptions GsmExtCell
...................................................................................................................................................................................................................................
2-112 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
qrxLevMin
(Quality receive levelminimum)
yes (RW) Minimum receive-qualitylevel that is needed in theneighboring GSM cell.
-115 through -25 stepsize=2
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions GsmExtCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-113
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
HSDPA...................................................................................................................................................................................................................................
Full name
High speed downlink packet access
Description
This object contains data related to the configuration of the High Speed DownlinkPacket Access (HSDPA) resources within the UTRAN. If HSDPA resources are notrequired in a cell then no HSDPA object needs to be created.
HSDPA is a packet-based data service in the UMTS downlink, with data transmissionsof up to 8-10 Mbps over a 5MHz bandwidth in the downlink only (from network touser’s terminal).
Note: If the HSDPA object is set to “disabled” HSDPA services are no longer availablein the cell.
Object constraints and supported actions
You can create, delete, and modify this object.
Attributes
The following attributes apply to the HSDPA object and are available through the GUIand CLI.
Attribute/Name Required Description Value
additionalFreeSF128CodesForIncrease
(Additional SF128 codes)
no (RW) These additional spreadingfactor (SF) 128 codes areadded tominFreeSF128CodesForHSDPADecreasealong with an SF128 code tocalculate the SF128threshold.
0 through 120 stepsize=1
Default = 16
additionalFreeSF16CodesForIncrease
(Additional SF16 codes)
no (RW) These additional spreadingfactor (SF) 16 codes areadded tominFreeSF16CodesForHSDPADecreasealong with an SF16 code tocalculate the SF16threshold.
0 through 15 stepsize=1
Default = 2
RNC object descriptions
...................................................................................................................................................................................................................................
2-114 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
additionalFreeSF256CodesForIncrease
(Additional SF256 codes)
no (RW) These additional spreadingfactor (SF) 256 codes areadded tominFreeSF256CodesForHSDPADecreasealong with an SF256 code tocalculate the SF256threshold.
0 through 224 stepsize=1
Default = 32
additionalFreeSF32CodesForIncrease
(Additional SF32 codes)
no (RW) These additional spreadingfactor (SF) 32 codes areadded tominFreeSF32CodesForHSDPADecreasealong with an SF32 code tocalculate the SF32threshold.
0 through 28 stepsize=1
Default = 4
additionalFreeSF8CodesForIncrease
(Additional SF8 codes)
no (RW) These additional spreadingfactor (SF) 8 codes areadded tominFreeSF8CodesForHSDPADecreasealong with an SF8 code tocalculate the SF8 threshold.
0 through 7 step size=1
Default = 1
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: locked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
RNC object descriptions HSDPA
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-115
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
empty
No default
hSCCHcode
(HS-SCCH code)
yes (RO-SC) Structure of HS-SCCHcodes, SF128. Sequence ofintegers {0 to 127}sequence containing at least4 elements. Therecommended codes are {4,5, 6, 7}.
Sequenceof 1 through4 records, using thefollowing value(s):
0 through 127 stepsize=1
No default
hSDPASrvCellChgCrit
(High speed downlinkpacket access serving cellchange)
no (RW) The attributes which arenecessary to configure event1D “Change of best cellwithin the active set” for theserving HS-DSCH cellchange procedure.
See“Structure ofHSDPA values”(p. 2-118).
Default = {1.0,
tIMETOTRIGGER_640,
true}
hSDPAStatusInfo
(High speed downlinkpacket access statusinformation)
no (RO) The operational state andavailablity status of theHSDPA resources in thecell.
See“Structure ofHSDPA values”(p. 2-118).
Default = {enabled,
empty}
hSDSCHStartCode
(High speed downlinkshared channel start code)
yes (RO-SC) The lowest High SpeedDownlink Shared Channel(HS-DSCH) code number ofspreading factor SF=16.
1 through 15 stepsize=1
Default = 12
isDLDCAActive
(Is DLDCA Active)
no (RW-PL) The enabling of thisattribute when HSDPA isoperational will allow theoperator to reserve aminimum and maximumnumber of SF16 codes forHSDPA in the cell.
true
false
Default = false
maxHSDPACodesAllowed
(Maximum HSDPA CodesAllowed)
no (RW) The maximum number ofspreading factor 16 codes toreserve for HSDPA.
1 through 15 stepsize=1
Default = 10
RNC object descriptions HSDPA
...................................................................................................................................................................................................................................
2-116 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
maxHsdpaUsersPerCell
(Maximum HSDPA usersper cell)
no (RW) This attribute is themaximum number ofconcurrent users that theRNC will assign to anHS-DSCH channel on a Cellof a NodeB.
0 through 128 stepsize=1
Default = 24
minFreeSF128CodesForHSDPADecrease
(Minimum SF128 codes)
no (RW) The minimum number ofspreading factor (SF) 128codes reserved for R99.
0 through 120 stepsize=1
Default = 16
minFreeSF16CodesForHSDPADecrease
(Minimum SF16 codes)
no (RW) The minimum number ofspreading factor (SF) 16codes reserved for R99.
0 through 15 stepsize=1
Default = 2
minFreeSF256CodesForHSDPADecrease
(Minimum SF256 codes)
no (RW) The minimum number ofspreading factor (SF) 256codes reserved for R99.
0 through 224 stepsize=1
Default = 32
minFreeSF32CodesForHSDPADecrease
(Minimum SF32 codes)
no (RW) The minimum number ofspreading factor (SF) 32codes reserved for R99.
0 through 28 stepsize=1
Default = 4
minFreeSF8CodesForHSDPADecrease
(Minimum SF8 codes)
no (RW) The minimum number ofspreading factor (SF) 8codes reserved for R99.
0 through 7 step size=1
Default = 1
minHSDPACodesToReserve
(Minimum HSDPA codes)
no (RW) The minimum number ofspreading factor (SF) 16codes to reserve for HSDPA.
1 through 15 stepsize=1
Default = 4
numberOfHSDSCHcode
(Number of HS-DSCHcodes)
yes (RO-SC) Number of HS-DSCH codesof SF 16.
1 through 12 stepsize=1
Default = 4
numHSDPACode
(Current assigned HSDPAcodes)
no (RO) The number of currentassigned HSDPA codes byRNC when Dynamic Codeallocation is enabled.
1 through 15 stepsize=1
Default = 1
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
RNC object descriptions HSDPA
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-117
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of HSDPA values
The following table describes the value format used for the HSDPA object attribute.
Attribute Sequence of structure Values
hSDPASrvCellChgCrit hysteresis 0.0 through 7.5 step size=0.5
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
RNC object descriptions HSDPA
...................................................................................................................................................................................................................................
2-118 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
hSDPASrvCellChgCrit useCIO true
false
hSDPAStatusInfo operationalState enabled
disabled
hSDPAStatusInfo availability inTest
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
RNC object descriptions HSDPA
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-119
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IntraFreqMeas...................................................................................................................................................................................................................................
Full name
Intra-frequency measurement
Description
This object allows the control of intra-frequency measurements in the User Equipment(UE).
Hierarchical location
Hierarchical location of the IntraFreqMeas object:
Object constraints and supported actions
You can modify this object.
The following list outlines the constraints for modifying the IntraFreqMeas object:
• Attribute measQty.quantity must be set to value rEPORTINGCPICHECNO.
• Attribute periodRepEvTrig must be set to value eENTTRIGGERED.
• Attribute measQty.measQtyFdd must be set to value mEASURE-MENTCPICHECNO.
Attributes
The following attributes apply to the IntraFreqMeas object and are available throughthe GUI and CLI.
LRNC
IntraFreqMeas
RNC object descriptions
...................................................................................................................................................................................................................................
2-120 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
activeSetRepQty
(Active set reportingquantity)
no (RO) The attributes that are usedto define the reportingquantities for the cells thatbelong to the active set of aUE.
See“Structure ofIntraFreqMeas values”(p. 2-124).
Default ={cELLSYNCIND_DISABLED,
false,
true,
true,
false}
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
RNC object descriptions IntraFreqMeas
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-121
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
detSetRepQu
(Detected set reportingquantity)
no (RO) The attributes that are usedto define the reportingquantities for the cells thatbelong to the detected set ofa UE.
See“Structure ofIntraFreqMeas values”(p. 2-124).
Default ={cELLSYNCIND_ENABLED,
false,
true,
true,
false}
measQty
(Measurement quantity)
yes (RW) The attributes needed for theintra-frequencymeasurements that the UEshould take.
See“Structure ofIntraFreqMeas values”(p. 2-124).
Default = {cOEFF_4,
rEPORTINGCPICHECNO,
sFNTYPE_1,
mEASUREMENTCPICHECNO,
cURRENTCELLAND2BESTNEIGHB
iNTRAFREQMEAS-REPORTING}
measurementReportTransfer-Mode
yes (RW) Defines whether themeasurement reports fromthe UE to the RNC shouldbe sent in acknowledged orunacknowledged mode.
aM_RLC
(Measurement reporttransfer mode)
uM_RLC
Default: aM_RLC
RNC object descriptions IntraFreqMeas
...................................................................................................................................................................................................................................
2-122 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
monSetRepQu
(Monitored set reportingquantity)
no (RO) The attributes that are usedto define the reportingquantities for the cells thatbelong to the monitored setof a UE.
See“Structure ofIntraFreqMeas values”(p. 2-124).
Default ={cELLSYNCIND_ENABLED,
false,
true,
true,
false}
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
periodRepEvTrig no (RO) Defines whether theintra-frequency measurementreports should be sentperiodically by the UE, oronly when a specified eventhas occurred.
pERIODIC
(Periodic reporting or eventtriggered)
eVENTTRIGGERED
Default:eVENTTRIGGERED
reportingCellStatus
(Reporting cell status)
yes (RW) Indicates to the UE whichand how manymeasurements should bereported in anintra-frequency measurementreport.
See“Structure ofIntraFreqMeas values”(p. 2-124).
Default is an emptysequence.
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
RNC object descriptions IntraFreqMeas
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-123
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of IntraFreqMeas values
The following table describes the value format used for the IntraFreqMeas objectattribute.
Attribute Sequence of structure Values
activeSetRepQty cellSyncIndicator cELLSYNCIND_DISABLED
cELLSYNCIND_ENABLED
cellInd true
false
cPICHECNO true
false
cPICHRSCP true
false
activeSetRepQty pathloss true
false
detSetRepQu cellSyncIndicator cELLSYNCIND_DISABLED
cELLSYNCIND_ENABLED
cellInd true
false
cPICHECNO true
false
RNC object descriptions IntraFreqMeas
...................................................................................................................................................................................................................................
2-124 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
cPICHRSCP true
false
detSetRepQu pathloss true
false
measQty filterCoefficient cOEFF_0
cOEFF_1
cOEFF_2
cOEFF_3
cOEFF_4
cOEFF_5
cOEFF_6
cOEFF_7
cOEFF_8
cOEFF_9
cOEFF_11
cOEFF_13
cOEFF_15
cOEFF_17
cOEFF_19
quantity rEPORTINGCPICHECNO
rEPORTINGCPICHRSCP
rEPORTINGPATHLOSS
rEPORTINGNOREPORT
sFNSFNObsTimeDiff sFNTYPE_1
measQtyFdd mEASUREMENTCPICHECNO
mEASUREMENTCPICHRSCP
mEASUREMENTPATHLOSS
maxNoReportedCellsOn-RACH
nOCURRENTCELLREPORT
cURRENTCELL
cURRENTCELLAND1BESTNEIGHBOUR
cURRENTCELLAND2BESTNEIGHBOURS
RNC object descriptions IntraFreqMeas
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-125
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
cURRENTCELLAND3BESTNEIGHBOURS
cURRENTCELLAND4BESTNEIGHBOURS
cURRENTCELLAND5BESTNEIGHBOURS
cURRENTCELLAND6BESTNEIGHBOURS
measQty reportingCriteriaChoice iNTRAFREQMEASREPORTING
pERIODICALREPORTING
nOREPORTING
monSetRepQu cellSyncIndicator cELLSYNCIND_DISABLED
cELLSYNCIND_ENABLED
cellInd true
false
cPICHECNO true
false
cPICHRSCP true
false
monSetRepQu pathloss true
false
reportingCellStatus reportedCell rEPORTCELLSACTIVESET
rEPORTCELLSMONITOREDSET
rEPORTCELLSACTIVEMONITOREDSET
rEPORTCELLSDETECTEDSET
rEPORTCELLSMONITOREDDE-TECTEDSET
rEPORTCELLSALLACTIVEANDMONI-TOREDSET
rEPORTCELLSALLACTIVEANDDE-TECTEDSET
rEPORTCELLSALLACTIVEANDMONI-TOREDDETECTEDSET
rEPORTCELLSVIRTUALACTIVESET
rEPORTCELLSMONITOREDSETNON-FREQ
RNC object descriptions IntraFreqMeas
...................................................................................................................................................................................................................................
2-126 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
rEPORTCELLSMONITOREDAC-TIVESETNONFREQ
rEPORTCELLSALLVIRTUALACTIVE-ANDMONITOREDSETNONFREQ
rEPORTCELLSACTIVEORVIRTUALSET
rEPORTCELLSACTIVEMONITOREDO-RACTIVEMONITOREDSETNONFREQ
maxNumOfRepCells 0 through 65535 step size=1
RNC object descriptions IntraFreqMeas
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-127
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IPQOS...................................................................................................................................................................................................................................
Full name
IP Quality of Service
Description
This object provides a mechanism for defining IP transport network Quality of Service(QOS) profiles that can be referenced from the Iu interface profile objects.
Impacted by add IuCS link, add IuPC link, add IuPS link, add peer RNC and Iur link,add IuB link, remove IuCS link, remove IuPC link, remove IuPS link, remove peerRNC and IuR link and remove IuB link use cases.
Hierarchical location
Hierarchical location of the IPQOS object:
Object constraints and supported actions
You can create, delete, and modify this object.
The value of trafficClassRAB must be unique within an IPQOS::umtsQos2DscpMapsequence.
Attributes
The following attributes apply to the IPQOS object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
IPQOS
LRNC
RNC object descriptions
...................................................................................................................................................................................................................................
2-128 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
umtsQos2DscpMap
(UMTS QoS to DSCPmapping)
yes (RW) Provides mapping fromUMTS QoS classes to IETFDiffServ Code Points for theUL DSCP marking.
Sequenceof 7 through12 records, using thefollowing value(s):
See“Structure ofIPQOS values”(p. 2-130).
Default is an emptysequence.
RNC object descriptions IPQOS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-129
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of IPQOS values
The following table describes the value format used for the IPQOS object attribute.
Attribute Sequence of structure Values
umtsQos2DscpMap trafficClassRAB cONVERSATIONAL
sTREAMING
bACKGROUND
sIGNALLING
iNTERACTIVE1
iNTERACTIVE2
iNTERACTIVE3
umtsQos2DscpMap dscp bE
aF11
aF12
aF13
aF21
aF22
aF23
aF31
aF32
aF33
RNC object descriptions IPQOS
...................................................................................................................................................................................................................................
2-130 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
aF41
aF42
aF43
eF
RNC object descriptions IPQOS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-131
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IuB...................................................................................................................................................................................................................................
Full name
Interface to Node B
Description
This object represents the Iub interface between the RNC and the Node B networkelements.
Hierarchical location
Hierarchical location of the IuB object:
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“IuB” (p. A-4) in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an IuB object.
• The vPI/vCI pairs in all arrays[x] of the following VCLs must be unique on a perPG basis (defined byprotectionGroup), across all these VCLs:
– IuB nbcpNbapVCLs[x]
– IuB ccpNbapVCLs[x]
– IuB alcapVCLs[x]
– IuB userplaneBVCLs[x]
– SS7Link.ss7VCL[x]
– IuR userplaneRVCLs[x]
LRNC
Iub
RNC object descriptions
...................................................................................................................................................................................................................................
2-132 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
– IuPSuserplanePsVCLs[x]
– IuCSuserplaneCsVCLS[x].With the exception that IuBnbcpNbapVCLs[1] and IuBccpNbapVCLs[1] areallowed to use the samevPI/vCI pairs for the sameprotectionGroup.
• Make sure thataal5BrefUNIStack refers to a valid UNIStack object.
• Make sure that each LNodeB object referenced byiuBRefLnodeb exists.
• Make sure that each PG object exists, referenced by:
– IuB nbcpNbapVCLs.protectionGroup
– IuB ccpNbapVCLs.protectionGroup
– IuB alcapVCLs.protectionGroup
– IuB userplaneBVCLs.protectionGroup.
• Make sure that each ATMQOS object exists, referenced by:
– IuB nbcpNbapVCLs.aTMQOS
– IuB ccpNbapVCLs.aTMQOS
– IuB alcapVCLs.aTMQOS
– IuB userplaneBVCLs.aTMQOS.
• Make sure that each ATMQOS referenced by:
– IuB nbcpNbapVCLs.aTMQOS is of type “vbrNrt”
– IuB ccpNbapVCLs.aTMQOS is of type “vbrNrt”
– IuB alcapVCLs.aTMQOS is of type “vbrNrt”
– IuB userplaneBVCLs.aTMQOS is of type “vbrNrt”, “vbrRt”, or “cbr”.
Attributes
The following attributes apply to the IuB object and are available through the GUI andCLI.
Attribute/Name Required Description Value
aal5BrefUNIStack
(ATM adaptation layer type5 Iub reference user networkinterface stack)
yes (RO-SC) Reference to the UserNetwork Interface stack(UNIStack) object used bythis interface.
String of characters
No default
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: locked
RNC object descriptions IuB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-133
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
alcapVCLs
(Access link controlapplication protocol virtualchannel links)
yes (RO-SC) The attributes that arerelated to the VirtualChannel Links (VCLs) forVirtual Channel Connections(VCCs) that carry AccessLink Control ApplicationProtocol (ALCAP)signaling.
Sequenceof 1 through2 records, using thefollowing value(s):
See“Structure of IuBvalues” (p. 2-136).
Default is an emptysequence.
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
ccpNbapVCLs
(Communication controlport NBAP virtual channellinks)
yes (RO-SC) The attributes that arerelated to the VirtualChannel Links (VCLs) forVirtual Channel Connections(VCCs) that carrycommunication control portNBAP messages for anytraffic-termination point thatis associated with this NodeB.
Sequenceof 1 through2 records, using thefollowing value(s):
See“Structure of IuBvalues” (p. 2-136).
Default is an emptysequence.
inhibitAlarms
(Inhibit Alarms)
yes (RW) This boolean flag is used tosuppress alarms from theRNC when the NodeB is inpreprovisioned orunmanaged state.
true
false
Default = false
RNC object descriptions IuB
...................................................................................................................................................................................................................................
2-134 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
iuBRefLnodeb
(Iub link reference to thelogical node B)
yes (RO-SC) The Distinguished Name(DN) of the Logicial NodeB object that is associatedwith this Iub link.
String of characters
No default
linkNumber
(Link number)
yes (RW) This is the link number tobe used when calling theATM algorithm forallocation of VirtualChannel Identifier(VCI)/Virtual Path Identifier(VPI) values.
0 through 9999 stepsize=1
No default
linkProfileDN
(Link Profile label)
yes (RW) Distinguished name label ofLinkProfile used toprovision this link
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
nbcpNbapVCLs
(Node B control port NBAPvirtual channel links)
yes (RO-SC) The attributes that arerelated to the VirtualChannel Link (VCL) thatcarries the Node B controlport Node B ApplicationPart (NBAP) messages.
Sequenceof 1 through2 records, using thefollowing value(s):
See“Structure of IuBvalues” (p. 2-136).
Default is an emptysequence.
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
resetRequestMaxRetries
(Reset request maximumretries)
no (RW) The maximum number oftimes the NBAP RESETREQUEST message can bere-transmitted by the RNCafter theresetRequest-Timer expires.
1 through 65535 stepsize=1
Default = 10
RNC object descriptions IuB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-135
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
resetRequestTimer
(Reset request timer)
no (RW) The length of time the RNCwill await a response fromthe Node B after sending aNBAP RESET REQUESTmessage to Node B.
0 through 65535 stepsize=1
Default = 30000
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
userplaneBVCLs
(Userplane B virtual channellinks)
yes (RO-SC) The attributes that arerelated to theVirtual ChannelLinks (VCLs) for AAL2based Virtual ChannelConnections (VCCs) thatcarry userplane B traffic.
Sequenceof 1 through24 records, using thefollowing value(s):
See“Structure of IuBvalues” (p. 2-136).
Default is an emptysequence.
Structure of IuB values
The following table describes the value format used for the IuB object attribute.
Attribute Sequence of structure Values
alcapVCLs vclTerminationRef 0 through 2147483647 step size=1
RNC object descriptions IuB
...................................................................................................................................................................................................................................
2-136 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
vPI 0 through 255 step size=1
vCI 32 through 63 step size=1
protectionGroup String of characters
alcapTLA String of characters
aTMQOS String of characters
ccpNbapVCLs vclTerminationRef 0 through 2147483647 step size=1
vPI 0 through 255 step size=1
vCI 32 through 63 step size=1
protectionGroup String of characters
aTMQOS String of characters
nbcpNbapVCLs vclTerminationRef 0 through 2147483647 step size=1
vPI 0 through 255 step size=1
vCI 32 through 63 step size=1
protectionGroup String of characters
aTMQOS String of characters
userplaneBVCLs vclTerminationRef 0 through 2147483647 step size=1
vPI 0 through 255 step size=1
vCI 32 through 63 step size=1
protectionGroup String of characters
aTMQOS String of characters
a2PIdentifier 1 through 2147483647 step size=1
ownership lOCAL
rEMOTE
tiCU 100 through 100 step size=1
RNC object descriptions IuB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-137
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IuCS...................................................................................................................................................................................................................................
Full name
Interface to the circuit switched core network
Description
This object represents the Iu-cs interface between the RNC and the Third GenerationMobile services Switching Center (3G-MSC) in the circuit switched core network.
Hierarchical location
Hierarchical location of the IuCS object:
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“IuCS” (p. A-5) in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an IuCS object.
• The vPI/vCI pairs in all arrays[x] of the following Virtual Channel Links (VCLs)must be unique on a per Protection Group (PG) basis (defined byprotectionGroup), across all these VCLs:
– IuB nbcpNbapVCLs[x]
– IuB ccpNbapVCLs[x]
– IuB alcapVCLs[x]
– IuB userplaneBVCLs[x]
– SS7Link.ss7VCL[x]
– IuR userplaneRVCLs[x]
LRNC
IuCS
RNC object descriptions
...................................................................................................................................................................................................................................
2-138 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
– IuPSuserplanePsVCLs[x]
– IuCSuserplaneCsVCLS[x].With the exception that IuBnbcpNbapVCLs[1] and IuBccpNbapVCLs[1] areallowed to use the samevPI/vCI pairs for the sameprotectionGroup.
• Make sure that the SS7LinkSet object referenced bymtp3bCSrefSS7ALCAP hasSS7LinkSetrefIuInterface with an empty sequence.
• Make sure that the SS7LinkSet object referenced bymtp3bCSrefSS7 hasSS7LinkSetrefIuInterface with an empty sequence.
• Whenmtp3bCSrefSS7 has the same value asmtp3bCSrefSS7ALCAP and IuCSrANAPDestinationPointCode does not match SS7LinkSetadjacentPointCode forthe SS7LinkSet referenced bymtp3bCSrefSS7ALCAP, make sure that IuCSrANAPDestinationPointCode is not the same as any one of the following pointcodes within an LRNC:
– SS7StackoriginatingPointCode
– SS7LinkSetadjacentPointCode
– IuR rNSAPDestinationPointCode.
• Make sure that each PG object referenced byuserplaneCsVCLs.protectionGroupexists.
• Make sure that each ATMQOS object referenced byuserplaneCsVCLs.aTMQOSexists.
• Make sure that each ATMQOS referenced byuserplaneCsVCLs.aTMQOS is of type“vbrRt” or “cbr”.
• Make sure thatmtp3bCSrefSS7 refers to a valid SS7LinkSet object that referencesa valid SS7Link object.
• Make sure thatmtp3bCSrefSS7ALCAP refers to a valid SS7LinkSet object thatreferences a valid SS7Link object.
• Whenmtp3bCSrefSS7 points to a different SS7LinkSet thanmtp3bCSrefSS7ALCAP,ensure that the IuCSrANAPDestinationPointCode matches the SS7LinkSetadjacentPointCode referenced bymtp3bCSrefSS7.
Attributes
The following attributes apply to the IuCS object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
RNC object descriptions IuCS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-139
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default: locked
aLCAPDestinationPointCode
(ALCAP destination pointcode)
no (RO) The Signaling System no. 7(SS7) Destination PointCode (DPC) of the remoteentity.
0 through 16383 stepsize=1
Default = 0
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
cnCsDrxCoefficient
(Core network circuitswitched discontinuousreception coefficient)
no (RW) The DiscontinuousReception (DRX) coefficientthat should be used by theUE when it is monitoringthe Paging IndicationChannel (PICH) for pagingmessages sent by the circuitswitched network.
6 through 9 step size=1
Default = 8
linkNumber
(Link number)
yes (RW) This is the link number tobe used when calling theATM algorithm forallocation of VirtualChannel Identifier(VCI)/Virtual Path Identifier(VPI) values.
0 through 9999 stepsize=1
No default
RNC object descriptions IuCS
...................................................................................................................................................................................................................................
2-140 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
linkProfileDN
(Link Profile label)
yes (RW) Distinguished name label ofLinkProfile used toprovision this link
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
maxQ
(Maximum Q)
yes (RO-SC) This timer is used toindicate the maximum timean Iu User Plane (Iu-UP)downlink frame shouldspend in the buffer beforebeing sent to the MediumAccess Control (MAC).
1 through 50 stepsize=1
Default = 6
minQ
(Minimum Q)
yes (RO-SC) This timer is used toindicate the minimum timean Iu User Plane (Iu-UP)downlink frame shouldspend in the buffer beforebeing sent to the MediumAccess Control (MAC).
1 through 50 stepsize=1
Default = 3
mtp3bCSrefSS7
(Message transfer part level3 Iu-CS reference SS7)
yes (RO-SC) Reference to the SS7 linkset used by this interface.
String of characters
No default
mtp3bCSrefSS7ALCAP
(Message transfer part level3 Iu-CS reference SS7ALCAP)
yes (RO-SC) Reference to the SS7 linkset used by this interface(for ALCAP).
String of characters
No default
nINIT
(Number of initializationframe)
no (RW) This identifies the maximumnumber of repetitions of anInitialization frame due tofailure at theInitializationprocedure.
0 through 255 stepsize=1
Default = 3
numberTA
(Number of time alignmentframes)
no (RW-RR) This identifies the maximumnumber of repetitions of atime alignment frame due tofailure at the time alignmentprocedure.
0 through 255 stepsize=1
Default = 3
RNC object descriptions IuCS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-141
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
numRateControlRetry
(Maximum Rate Controlframes)
no (RW) This parameter identifies themaximum number ofrepetitions of a Rate Controlframe due to failure at theRate Control procedure.
0 through 255 stepsize=1
Default = 3
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
pagingPriority
(Paging priority)
yes (RW) The applicable pagingpriority for the pagingrequests that are originatedfrom this network entity.
1 through 3 step size=1
Default = 2
rANAPDestinationPointCode
(RANAP destination pointcode)
yes (RO-SC) The Signaling System no. 7(SS7) Destination PointCode (DPC) of the remoteentity.
0 through 16383 stepsize=1
Default = 0
rateControlTimer
(Rate Control Timer)
no (RW-RR) This Timer is used tosupervise the reception ofthe rate controlacknowledgement framefrom the peer Iu UPinstance.
20 through 300 stepsize=20
Default = 180
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
stepIncTraf
(Step size increasing traffic)
yes (RW) The step size by whichoverload-reduction filteringshould be increased aftertimer tINTR has expired.
1 through 16 stepsize=1
Default = 1
RNC object descriptions IuCS
...................................................................................................................................................................................................................................
2-142 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
stepRedFiltering
(Step reduction filtering)
yes (RW) The traffic reductionfiltering steps that are usedin the RNC when the CoreNetwork (CN) is in anoverload situation.
See“Structure of IuCSvalues” (p. 2-144).
Default = {6,
13,
19,
25,
31,
38,
44,
50,
56,
63,
69,
75,
81,
88,
94,
100}
tAIndicator
(Time alignment indicator)
no (RW-RR) This identifies whether (ornot) the time alignmentprocedure should beattempted.
true
false
Default = false
tIGOR
(Timer ignore)
yes (RW) While this timer is runningall OVERLOAD messagesor signaling point congestedinformation received at theRNC are ignored.
1000 through 3600000step size=1
Default = 15000
timerINIT
(Timer initialization)
no (RW-RR) This timer is used tosupervise the reception ofthe initializationacknowledgement framefrom the peer Iu User Plane(UP) instance.
20 through 300 stepsize=20
Default = 180
RNC object descriptions IuCS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-143
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
timerTA
(Timer time alignment)
no (RW-RR) This timer is used tosupervise the reception ofthe time alignmentacknowledgement framefrom the peer Iu User Plane(UP) instance.
20 through 300 stepsize=20
Default = 180
tINTR
(Timer internal threshold)
yes (RW) While this timer is running,the RNC is not allowed toincrease the traffic load.
1000 through 3600000step size=1
Default = 30000
tpageVal
(Timer paging validity)
yes (RW) The lifetime of a pagingmessage.
20 through 20000 stepsize=10
Default = 3000
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
userplaneCsVCLs
(Userplane C virtual channellinks)
yes (RO-SC) The attributes that areapplicable for the VirtualChannel Link (VCL)termination for AAL2Virtual Channel Connections(VCCs) that carry the Iu-CSuserplane traffic (referred toas userplane C traffic).
Sequenceof 1 through40 records, using thefollowing value(s):
See“Structure of IuCSvalues” (p. 2-144).
Default is an emptysequence.
Structure of IuCS values
The following table describes the value format used for the IuCS object attribute.
RNC object descriptions IuCS
...................................................................................................................................................................................................................................
2-144 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
stepRedFiltering filter1 0 through 100 step size=1
filter2 0 through 100 step size=1
filter3 0 through 100 step size=1
filter4 0 through 100 step size=1
filter5 0 through 100 step size=1
filter6 0 through 100 step size=1
filter7 0 through 100 step size=1
filter8 0 through 100 step size=1
filter9 0 through 100 step size=1
filter10 0 through 100 step size=1
filter11 0 through 100 step size=1
filter12 0 through 100 step size=1
filter13 0 through 100 step size=1
filter14 0 through 100 step size=1
filter15 0 through 100 step size=1
filter16 0 through 100 step size=1
userplaneCsVCLs vclTerminationRef 0 through 2147483647 step size=1
vPI 0 through 255 step size=1
vCI 32 through 63 step size=1
protectionGroup String of characters
aTMQOS String of characters
a2PIdentifier 1 through 2147483647 step size=1
ownership lOCAL
rEMOTE
tiCU 100 through 100 step size=1
RNC object descriptions IuCS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-145
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IuPS...................................................................................................................................................................................................................................
Full name
Interface to the packet switched core network
Description
This object represents the Iu-ps interface between the RNC and the Serving GPRSSupport Node (SGSN) in the packet switched core network.
Hierarchical location
Hierarchical location of the IuPS object:
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“IuPS” (p. A-5) in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an IuPS object.
• The vPI/vCI pairs in all arrays[x] of the following Virtual Channel Links (VCLs)must be unique on a per Protection Group (PG) basis (defined byprotectionGroup), across all these VCLs:
– IuB nbcpNbapVCLs[x]
– IuB ccpNbapVCLs[x]
– IuB alcapVCLs[x]
– IuB userplaneBVCLs[x]
– SS7Link.ss7VCL[x]
– IuR userplaneRVCLs[x]
LRNC
IuPS
RNC object descriptions
...................................................................................................................................................................................................................................
2-146 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
– IuPSuserplanePsVCLs[x]
– IuCSuserplaneCsVCLS[x].With the exception that IuBnbcpNbapVCLs[1] and IuBccpNbapVCLs[1] areallowed to use the samevPI/vCI pairs for the sameprotectionGroup.
• Make sure that the SS7LinkSet object referenced bymtp3bPSrefSS7 hasSS7LinkSetrefIuInterface with an empty sequence.
• Make sure that each PG object referenced by IuPSuserplanePsVCLs.protec-tionGroup exists.
• Make sure that each ATMQOS object referenced by IuPSuserplanePsVCLs.aT-MQOS exists.
• Make sure that each ATMQOS referenced by IuPSuserplanePsVCLs.aTMQOS is oftype “vbrNrt”.
• Make sure that every element ofuserplanePsVCLs has a uniquevCLId within thesequence.
• Make sure thatmtp3bPSrefSS7 refers to a valid SS7LinkSet object that hasrefLink referring to a valid SS7Link object.
Attributes
The following attributes apply to the IuPS object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: locked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
RNC object descriptions IuPS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-147
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
notInstalled
logFull
empty
No default
cnPsDrxCoefficient
(Core network packetswitched discontinuousreception coefficient)
no (RW) The DiscontinuousReception (DRX) coefficientthat should be used by theUE when it is monitoringthe Paging IndicationChannel (PICH) for pagingmessages sent by the packetswitched network.
6 through 9 step size=1
Default = 8
gTPUEchoCounterThresh
(GPRS tunneling protocoluser plane echo counterthreshold)
no (RW) This attribute provides thethreshold associated with theGPRS Tunneling ProtocolUser (GTP-U) echo counter.
1 through 20 stepsize=1
Default = 3
gTPUEchoReqActivated
(GPRS tunneling protocoluser plane echo requestactivated)
no (RW) This attribute defineswhether or not the RNCtransmits the GPRSTunneling Protocol User(GTP-U) ECHO REQUESTmessage.
true
false
Default = false
gTPUEchoReqTimer
(GPRS tunneling protocoluser plane echo requesttimer)
no (RW) This timer is used to triggerthe transmission of theGPRS Tunneling ProtocolUser (GTP-U) ECHOREQUEST message fromthe RNC to the SGSN.
60 through 600 stepsize=1
Default = 120
gTPUMulticastIPAddress
(GPRS tunneling protocoluser plane multicast IPaddress)
no (RO) GPRS Tunneling Protocolfor the User plane (GTP-U)multicast IP address neededto broadcast GTP errorconditions.
String of characters
Default =239.192.100.001
linkNumber
(Link number)
yes (RW) This is the link number tobe used when calling theATM algorithm forallocation of VirtualChannel Identifier(VCI)/Virtual Path Identifier(VPI) values.
0 through 9999 stepsize=1
No default
RNC object descriptions IuPS
...................................................................................................................................................................................................................................
2-148 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
linkProfileDN
(Link Profile label)
yes (RW) Distinguished name label ofLinkProfile used toprovision this link
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
mtp3bPSrefSS7
(Message transfer part level3 Iu-PS reference SS7)
yes (RO-SC) Reference to the SS7 linkset used by this interface.
String of characters
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
pagingPriority
(Paging priority)
yes (RW) The applicable pagingpriority for the pagingrequests that are originatedfrom this network entity.
1 through 3 step size=1
Default = 3
rANAPDestinationPointCode
(RANAP destination pointcode)
no (RO) The Signaling System no. 7(SS7) Destination PointCode (DPC) of the remoteentity.
0 through 254255255step size=1
Default = 0
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
stepIncTraf
(Step size increasing traffic)
yes (RW) The step size by whichoverload-reduction filteringshould be increased aftertimer tINTR has expired.
1 through 16 stepsize=1
Default = 1
RNC object descriptions IuPS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-149
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
stepRedFiltering
(Step reduction filtering)
yes (RW) The traffic reductionfiltering steps that are usedin the RNC when the CoreNetwork (CN) is in anoverload situation.
See“Structure of IuPSvalues” (p. 2-151).
Default = {6,
13,
19,
25,
31,
38,
44,
50,
56,
63,
69,
75,
81,
88,
94,
100}
tIGOR
(Timer ignore)
yes (RW) While this timer is runningall OVERLOAD messagesor signaling point congestedinformation received at theRNC are ignored.
1000 through 3600000step size=1
Default = 15000
tINTR
(Timer internal threshold)
yes (RW) While this timer is running,the RNC is not allowed toincrease the traffic load.
1000 through 3600000step size=1
Default = 30000
tpageVal
(Timer paging validity)
yes (RW) The lifetime of a pagingmessage.
20 through 20000 stepsize=10
Default = 3000
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions IuPS
...................................................................................................................................................................................................................................
2-150 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
userplanePsVCLs
(Userplane P virtual channellinks)
yes (RO-SC) The attributes that areapplicable for the VirtualChannel Link (VCL)termination for multipleAAL5 Virtual ChannelConnections (VCCs) thatcarry the Iu-PS GTP/IPuserplane traffic (referred toas userplane P traffic).
Sequenceof 1 through64 records, using thefollowing value(s):
See“Structure of IuPSvalues” (p. 2-151).
Default is an emptysequence.
Structure of IuPS values
The following table describes the value format used for the IuPS object attribute.
Attribute Sequence of structure Values
stepRedFiltering filter1 0 through 100 step size=1
filter2 0 through 100 step size=1
filter3 0 through 100 step size=1
filter4 0 through 100 step size=1
filter5 0 through 100 step size=1
filter6 0 through 100 step size=1
filter7 0 through 100 step size=1
filter8 0 through 100 step size=1
filter9 0 through 100 step size=1
filter10 0 through 100 step size=1
filter11 0 through 100 step size=1
filter12 0 through 100 step size=1
filter13 0 through 100 step size=1
RNC object descriptions IuPS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-151
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
filter14 0 through 100 step size=1
filter15 0 through 100 step size=1
filter16 0 through 100 step size=1
userplanePsVCLs vclTerminationRef 0 through 2147483647 step size=1
rNCGwayIPAddress String of characters
sGSNGwayIPaddress String of characters
gwaySubnetMask String of characters
vPI 0 through 255 step size=1
vCI 32 through 63 step size=1
protectionGroup String of characters
aTMQOS String of characters
vCLId 1 through 999 step size=1
RNC object descriptions IuPS
...................................................................................................................................................................................................................................
2-152 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IuPSSubNet...................................................................................................................................................................................................................................
Full name
Interface to the packet switched core network subnet
Description
This object defines the relationship between a set of IuPS Virtual Channel Connections(VCCs) with an RNC GPRS Tunneling Protocol (GTP) subnet and an SGSN GTPsubnet.
Hierarchical location
Hierarchical location of the IuPSSubNet object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an IuPSSubNet object.
• Make sure that every element ofvCLRef refers to a valid IuPSuserplanePsVCLs-.vCLId.
The following list outlines the object constraints for deleting an IuPSSubNet object.
• Make sure IuPS is locked to perform a delete of IuPSSubNet.
Attributes
The following attributes apply to the IuPSSubNet object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
LRNC
IuPSSubNet
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-153
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
rncNetworkIds
(RNC network identities)
yes (RO-SC) The valid RNC subnetworkidentifiers.
Sequenceof 1 through5 records, using thefollowing value(s):
See“Structure ofIuPSSubNet values”(p. 2-155).
Default is an emptysequence.
sgsnNetworkIds
(SGSN network identities)
yes (RO-SC) The valid SGSN subnetworkidentifiers.
Sequenceof 1 through5 records, using thefollowing value(s):
See“Structure ofIuPSSubNet values”(p. 2-155).
Default is an emptysequence.
RNC object descriptions IuPSSubNet
...................................................................................................................................................................................................................................
2-154 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
supportApplLoopback
(Support applicationloopback)
yes (RW) This attribute indicateswhether applicationloopback is supported.
true
false
Default = false
supportLinkLoopback
(Support link loopback)
yes (RW) This attribute indicateswhether link loopback issupported.
true
false
Default = false
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vCLRef
(Virtual channel linkreference)
yes (RO-SC) Virtual Channel Link (VCL)identifiers to allow theIuPSSubNet definition toreference a number of ATMVCLs.
Sequenceof 1 through4 records, using thefollowing value(s):
1 through 999 stepsize=1
No default
Structure of IuPSSubNet values
The following table describes the value format used for the IuPSSubNet objectattribute.
RNC object descriptions IuPSSubNet
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-155
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
rncNetworkIds netId String of characters
netMask String of characters
sgsnNetworkIds netId String of characters
netMask String of characters
RNC object descriptions IuPSSubNet
...................................................................................................................................................................................................................................
2-156 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IuR...................................................................................................................................................................................................................................
Full name
Interface between RNCs
Description
This object represents the Iur interface between two RNCs.
Hierarchical location
Hierarchical location of the IuR object:
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“IuR” (p. A-5) in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an IuR object.
• The vPI/vCI pairs in all arrays[x] of the following Virtual Channel Links (VCLs)must be unique on a per Protection Group (PG) basis (defined byprotectionGroup), across all these VCLs:
– IuB nbcpNbapVCLs[x]
– IuB ccpNbapVCLs[x]
– IuB alcapVCLs[x]
– IuB userplaneBVCLs[x]
– SS7Link.ss7VCL[x]
– IuR userplaneRVCLs[x]
LRNC
IuR
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-157
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
– IuPSuserplanePsVCLs[x]
– IuCSuserplaneCsVCLS[x].With the exception that IuBnbcpNbapVCLs[1] and IuBccpNbapVCLs[1] areallowed to use the samevPI/vCI pairs for the sameprotectionGroup.
• Make sure that the SS7LinkSet object referenced bymtp3bRrefSS7 has SS7LinkSetrefIuInterface with an empty sequence.
• Make sure that the SS7LinkSet object referenced bymtp3bRrefSS7ALCAP hasSS7LinkSetrefIuInterface with an empty sequence.
• Whenmtp3bRrefSS7 has the same value asmtp3bRrefSS7ALCAP and IuRrNSAPDestinationPointCode does not match SS7LinkSetadjacentPointCode forthe SS7LinkSet referenced bymtp3bRrefSS7ALCAP, make sure that IuRrNSAPDestinationPointCode is not the same as any one of the following pointcodes within an LRNC:
– SS7StackoriginatingPointCode
– SS7LinkSetadjacentPointCode
– IuCSrANAPDestinationPointCode
– IuR rNSAPDestinationPointCode.
• Make sure that the Peer Radio Network Controller (PRNC) object referenced byrefPrnc exists.
• Make sure that each PG object referenced by IuRuserplaneRVCLs.protection-Group exists.
• Make sure that each ATMQOS object referenced by IuRuserplaneRVCLs.aTMQOSexists.
• Make sure that each ATMQOS referenced by IuRuserplaneRVCLs.aTMQOS is oftype “vbrNrt”, “vbrRt”, or “cbr”.
• Make sure thatmtp3bRrefSS7 refers to a valid SS7LinkSet object that hasrefLinkreferring to a valid SS7Link object.
• Make sure thatmtp3bRrefSS7ALCAP refers to a valid SS7LinkSet object that hasrefLink referring to a valid SS7Link object.
• Whenmtp3bRrefSS7 points to a different SS7LinkSet thanmtp3bRrefSS7ALCAP,ensure that the IuRrNSAPDestinationPointCode matches SS7LinkSetadjacentPointCode referenced bymtp3bRrefSS7.
Attributes
The following attributes apply to the IuR object and are available through the GUI andCLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
RNC object descriptions IuR
...................................................................................................................................................................................................................................
2-158 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(Administrative state) shuttingDown
locked
Default: locked
aLCAPDestinationPointCode
(ALCAP destination pointcode)
no (RO) The Signaling System no. 7(SS7) Destination PointCode (DPC) of the remoteentity.
0 through 254255255step size=1
Default = 0
associatedLinkNumber
(Associated Link number)
yes (RW) The Associated Link numberto be used when calling theATM Algorithm forallocation of VCI/VPIvalues at the Peer RNC endof an Iur Link.
0 through 20 stepsize=1
No default
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
containedlinkNumber
(Contained Link number)
yes (RW) Contained Link number tobe used when calling theATM Algorithm forallocation of VCI/VPIvalues at the Owner RNCend of an Iur Link.
0 through 10 stepsize=1
No default
RNC object descriptions IuR
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-159
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
hSDPAOverIurAllowed
(HSDPA Over Iur Allowed)
no (RW) This parameter defines ifHSDPA over IuR to theDRNC is allowed.
true
false
Default = true
interFrequencyHHOviaIur
(Inter-frequency Hard HandOver)
no (RW) This parameter allows theoperator to select per peerRNC whetherinter-frequency Hard HandOver (HHO) may beperformed via Iurconnection or not.
true
false
Default = true
iurEmergencyCallPreEmp-tionCapability
yes (RW) This attribute indicates thepre-emption capability of anemergency call from a peerServing Radio NetworkController (SRNC) over theIur interface.
shallNotTriggerPre-Emption
(Iur emergency callpre-emption capability)
mayTriggerPreEmption
Default:mayTriggerPreEmption
iurEmergencyCallPreEmp-tionVulnerability
yes (RW) This attribute indicates thepre-emption vulnerability ofan emergency call from apeer Serving Radio NetworkController (SRNC) over theIur interface.
notPreEmptable
(Iur emergency callpre-emption vulnerability)
preEmptable
Default:notPreEmptable
iurEmergencyCallPriori-tyLevel
(Iur emergency call prioritylevel)
yes (RW) This attribute indicates thepriority level of anemergency call from a peerServing Radio NetworkController (SRNC) over theIur interface.
1 through 15 stepsize=1
Default = 2
RNC object descriptions IuR
...................................................................................................................................................................................................................................
2-160 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
iurLinkDN
(Iur distinguished nameholder)
yes (RO-SC) Attribute to hold the DN ofthe related SNM objectIurLink.
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
linkProfileDN
(Link Profile label)
yes (RW) Distinguished name label ofLinkProfile used toprovision this link
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
mPDPplusStreamingWithR99AllowedViaIur
(MPDP plus streaming withR99 allowed via Iur)
no (RW) Defines whether calls withtwo I/B and one streamingPS RABs are allowed overIuR. IfmPDPplusStreamingWithR99AllowedViaIuris set to FALSE, the RNCshall reject any RABestablishment requestresulting in two I/B RABsplus one Streaming RABwhen the RNC has linkstowards the UE over the Iur.In addition, ifmPDPplusStreamingWithR99AllowedViaIuris set to FALSE and amobility event results in aneed to add a radio link tothe UE with two I/B RABsplus one Streaming on theDRNC, then one I/B RAB isreleased. The I/B RAB withhighest stringent’Allocation/RetentionPriority’ and highest QoS iskept.
true
false
Default = true
RNC object descriptions IuR
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-161
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
mPDPwithHSDPAallowedVi-aIur
(MPDP with HSDPAallowed via IuR)
no (RW) Defines whether HSDPAcalls with multiple PS RABsare allowed over IuR.
true
false
Default = true
mtp3bRrefSS7
(Message transfer part level3 Iur reference SS7)
yes (RO-SC) Reference to the SS7 linkset used by this interface.
String of characters
No default
mtp3bRrefSS7ALCAP
(Message transfer part level3 Iur reference SS7 ALCAP)
yes (RO-SC) Reference to the SS7 linkset used by this interface(for ALCAP).
String of characters
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
pDU656enabled
(PDU 656 enabled)
no (RW) Indicates if the use of 656bit RLC PDU for HSDPAtransfer is enabled on agiven Iur interface.
true
false
Default = false
peerIuRDN
(Peer RNC IuR DistinguisedName)
yes (RW) Distinguised Name (DN) ofthe IuR at the peer RNC endof link.
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
refPrnc
(Reference peer RNC)
yes (RO-SC) The Distinguished Name(DN) of the Peer RNC(PRNC) object that isrelated to this Iur link.
String of characters
No default
rNSAPDestinationPointCode
(RNSAP destination pointcode)
yes (RO-SC) The Signaling System no. 7(SS7) Destination PointCode (DPC) of the remoteentity.
0 through 254255255step size=1
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
RNC object descriptions IuR
...................................................................................................................................................................................................................................
2-162 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
coldStandby
providingService
Default: notSupported
streamingWithDchHsdpaAl-lowedViaIur
(Streaming with DCHHSDPA allowed via IuR)
no (RW) Defines whether HSDPAcalls with streaming areallowed over IuR. If it isnot allowed then on RABestablishment or when thebest cell changes to theDRNC the call is setup orreconfigured to DCH.
true
false
Default = true
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
userplaneRVCLs
(Userplane R virtual channellinks)
yes (RO-SC) The attributes that areapplicable for the VirtualChannel Link (VCL)termination for AAL2Virtual Channel Connections(VCCs) that carry the Iurinformation (referred to asuserplane R traffic).
Sequenceof 1 through36 records, using thefollowing value(s):
See“Structure of IuRvalues” (p. 2-163).
Default is an emptysequence.
Structure of IuR values
The following table describes the value format used for the IuR object attribute.
Attribute Sequence of structure Values
userplaneRVCLs vclTerminationRef 0 through 2147483647 step size=1
vPI 0 through 255 step size=1
RNC object descriptions IuR
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-163
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
vCI 32 through 63 step size=1
protectionGroup String of characters
aTMQOS String of characters
ownership lOCAL
rEMOTE
a2PIdentifier 1 through 2147483647 step size=1
tiCU 100 through 100 step size=1
RNC object descriptions IuR
...................................................................................................................................................................................................................................
2-164 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
LA...................................................................................................................................................................................................................................
Full name
Location area
Description
This object represents a cluster of one or more radio cells that together form aLocation Area (LA).
The set of radio cells served by a Node B can be assigned to different LAs but a singleradio cell can be assigned to one area only. All Node Bs serving radio cells assigned tothe same LA are to be controlled by RNCs which are connected to the same MSC.
Hierarchical location
Hierarchical location of the LA object:
Object constraints and supported actions
You can create, delete, and modify this object.
Attributes
The following attributes apply to the LA object and are available through the GUI andCLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
attFlag
(Attach/detach flag)
no (RW) Indicates whetherInternational MobileSubscriber Identity (IMSI)attach/detach service isactive in this cell.
true
false
Default = true
LRNC
LA
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-165
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
lARefCells
(LA object cell list)
no (RO) Reverse list of LCell objectswhich reference this LAobject.
Sequenceof 0 through5994 records, using thefollowing value(s):
String of characters
No default
lARefExtCells
(Location area referencedcell list)
no (RO) Reverse list of FddExtCellobjects which reference thisLA object.
Sequenceof 0 through2997 records, using thefollowing value(s):
String of characters
No default
locationAreaCode
(Location area code)
yes (RO-SC) The Location Area Code(LAC) identifies a locationarea within a PLMN.
1 through 65535 stepsize=1
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
RNC object descriptions LA
...................................................................................................................................................................................................................................
2-166 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
coldStandby
providingService
Default: notSupported
t3212
(Timer 3212)
no (RW) Indicates the interval inwhich the UE has toperform a periodic locationupdate.
0 through 255 stepsize=1
Default = 60
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions LA
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-167
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
LCell...................................................................................................................................................................................................................................
Full name
Logical cell
Description
This object represents the logical cell function supported by the RNC.
Besides the control and management of cell-related information it allows theadministration of the following channels:
• Common Pilot Channels (CPICHs)
• Physical Shared Channels (PSCHs)
• Synchronization Channels (SCHs)
• Primary Common Control Physical Channels (P-CCPCHs)
• Broadcast Channels (BCHs).
Hierarchical location
Hierarchical location of the LCell object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an LCell object.
• Make sure that the LCell, FddExtCell, and GsmExtCell objects in the OutgoingAdjacent Cell Lists (outFDDAdjCells andoutGsmAdjCells) exist.
• Make sure that the total maximum number of adjacent cell object references (LCell,FddExtCell, and GsmExtCell objects) does not exceed 32 in the outgoing adjacentcell attributes (outFDDExtCells andoutGSMExtCells).
• WhenoutFDDAdjCells.choiceAccuracy is set to:
– 2560 chips, then ensureoutFDDAdjCells.timeDiffToCell is in the range 0 upto 15
– 256 chips, then ensureoutFDDAdjCells.timeDiffToCell is in the range 0 upto 150.
LRNC
LCell
LNodeB
RNC object descriptions
...................................................................................................................................................................................................................................
2-168 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
• Make sure thatthrConCUL ≥ thrCACUL.
• Make sure thatthrConCDL ≥ thrCACDL.
• Make sure thatthrCACUL ≥ thrDBCUL.
• Make sure thatthrCACDL ≥ thrDBCDL.
• Make sure thatpersistLow ≥ persistHigh.
• Make sure that the referenced SAPS, SACS, and RA objects exist.
• Make sure that the SAPS, SACS, and RA objects referenced from LCell in turnreference the same LA object.
• Make sure that the SAPS and SACS objects referenced from LCell have the samevalue for service area code (sAPSCode andsACSCode).
• Make sure that not more than one OCNS object per LCell may be created withmodeOfOperation set to “voice”.
• Make sure that the referenced URA object exists.
• Only one element oflCellRefURAs must havelCellRefURAs.preferredURA setto “true”.
• For antennaLongitude if degrees = 180, then make sure thatminutes = 0 andseconds = 0.
• For antennaLatitude if degrees = 90, then make sure thatminutes = 0 andseconds = 0.
• Make sure that each populated element of the sequenceoutFddToGsmCellsDahorefers to a valid GsmExtCell object.
• For lCSReportLongitude if degrees = 180, then make sure thatminutes = 0 andseconds = 0.
• For lCSReportLatitude if degrees = 90, then make sure thatminutes = 0 andseconds = 0.
• Make sure that the value ofcellIndex is unique within an LCelloutFDDAdjCells.cellIndex sequence.
• Make sure that the object referenced byrefCellSP exists.
• Make sure that eitheruARFCNNd − uARFCNNu = 950 oruARFCNNd − uARFCNNu =400.
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-169
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
The following list outlines the object constraints for modifying an LCell object usingthe set command.
• Make sure that the LCell and FddExtCell objects referenced byoutFDDAdjCellsexist
• For every FddExtCell referenced inoutFDDAdjCells, ensure that the size ofFddExtCell.inAdjCells is 1 less than the maximum number of elements it cansupport.
• Make sure that the total maximum number of adjacent cell object references (LCell,FddExtCell, and GsmExtCell objects) does not exceed 32 in the outgoing adjacentcell attributes (outFDDExtCells andoutGSMExtCells).
The following list outlines the object constraints for unlocking an LCell object usingthe unlock command.
• Make sure that theprimaryScramblingCode anduARFCNNd attribute combinationis not found on any adjacent LCell objects.
Attributes
The following attributes apply to the LCell object and are available through the GUIand CLI.
Attribute/Name Required Description Value
activeSetSizeCS
(Active set size circuitswitched)
yes (RW) This attribute defines theservice-dependent maximumnumber of cells in the activeset at a time for one UErequesting Circuit Switched(CS) service.
2 through 6 step size=1
Default = 4
activeSetSizePS
(Active set size packetswitched)
yes (RW) This attribute defines theservice-dependent maximumnumber of cells in the activeset at a time for one UErequesting Packet Switched(PS) service.
2 through 4 step size=1
Default = 3
addThresholdSHO
(Add threshold softhandover)
no (RW) A hysteresis that determinesthe entry condition for cellsto be included in the activeset at call setup.
0.0 through 14.5 stepsize=0.5
Default = 4.0
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-170 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default: locked
aGPSEnableForEc
(AGPS Enable, Emergencyclients)
no (RW) Enables/Disables AGPSpositioning method foremergency clients on a percell basis.
true
false
Default = true
aGPSEnableForNec
(AGPS Enable,non-emergency clients)
no (RW) Enables/Disables AGPSpositioning method fornon-emergency clients on aper cell basis.
true
false
Default = true
aMR475Config
(AMR 4.75 codecconfiguration)
no (RW) Defines the parametersassociated with the selectionof the AMR 4.75 codec.
See“Structure of LCellvalues” (p. 2-208).
Default = {false,
50,
50,
50,
50}
aMR59Config
(AMR 5.9 codecconfiguration)
no (RW) Defines the parametersassociated with the selectionof the AMR 5.9 codec.
See“Structure of LCellvalues” (p. 2-208).
Default = {false,
50,
50,
50,
50}
aMR59MinDLSF128Codes
(AMR5.9 codec threshold)
no (RW) This parameter defines thethreshold for the number ofavailable SF128 codes toselect the downlinkspreading factor forAMR5.9.
0 through 127 stepsize=1
Default = 38
aMR795Config
(AMR 7.95 codecconfiguration)
no (RW) Defines the parametersassociated with the selectionof the AMR 7.95 codec.
See“Structure of LCellvalues” (p. 2-208).
Default = {false,
50,
50,
50,
50}
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-171
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
antennaAltitude
(Antenna altitude)
yes (RW) This attribute specifies theantenna altitude positionrelative to WGS84 ellipsoid.
See“Structure of LCellvalues” (p. 2-208).
Default = {height,
0.0}
antennaAzimuth
(Antenna azimuth)
yes (RW) This attribute specifies theantenna azimuth of the mainbeam.
0 through 359 stepsize=1
Default = 0
antennaBeamWidth
(Antenna beam width)
yes (RW) This attributes defines themain antenna beam width.
0 through 360 stepsize=1
Default = 130
antennaLatitude
(Antenna latitude)
yes (RW) This attribute specifies thegeographical latitude of theantenna position.
See“Structure of LCellvalues” (p. 2-208).
Default = {0,
0,
1.0,
northern}
antennaLongitude
(Antenna longitude)
yes (RW) This attribute specifies thegeographical longitude ofthe antenna position.
See“Structure of LCellvalues” (p. 2-208).
Default = {0,
0,
1.0,
western}
availability no (RO) Status information about theavailability of the cell.
inTest
(Availability) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-172 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default: inTest
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
bCCHModificationTime
(BCCH modification time)
no (RW) Indicates the System FrameNumber (SFN) when theNode B needs to updateboth the Master InformationBlock and the SystemInformation Block.
0 through 511 stepsize=1
Default = 0
bCCHRequiredTransmission-Period
(BCCH requiredtransmission period)
yes(RW-LO)
Indicates to RNC callprocessing the period forwhich it has to include theBCCH modification info IEin the RRC Paging Type 1message to indicate to theUE there is a BCCHmodification.
1 through 16 stepsize=1
Default = 1
bCHPower
(Broadcast channel power)
yes (RW) Defines the output powerlevel of the BroadcastChannel (BCH) transportchannel.
-35.0 through 15.0 stepsize=0.1
Default = -3.0
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-173
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
bCHStatusInfo
(Broadcast channel statusinformation)
no (RO) Contains the operationalstate and availablity statusof the BCH transportchannel in the cell.
See“Structure of LCellvalues” (p. 2-208).
Default = {enabled,
empty}
borderCellToGsm
(Border cell to Gsm flag)
no (RW) Marks a cell as a border cellof the UMTS network to aGSM network.
true
false
Default = false
cellSelAndResQualMeas yes (RW) The type of measurementsthat must be used for quality(Q) measurements duringcell selection andreselection.
cPICHECNO
(Cell selection andreselection qualitymeasurements)
cPICHRSCP
Default: cPICHECNO
channelOperationalState no (RO) The operational state of thechannels.
enabled
(Channel operational state) disabled
Default: enabled
closedLoopTimingAdjust-mentMode
yes(RW-LO)
Indicates whether closedloop mode TX diversity isused in this cell.
oFFSET_1
(Closed loop timingadjustment mode)
oFFSET_2
Default: oFFSET_1
compressedModeInterRat
(Compressed mode forinter-RAT measurements)
no (RW) The parameter defineswhether the use of thecompressed mode is allowedin the cell for inter-RATmeasurements.
true
false
Default = true
conCWaitTime
(Congestion control waittime)
yes (RW) This is the waiting timecongestion control shall waitafter reducing a packetswitched service until itchecks again for overload.
100 through 10000step size=100
Default = 2000
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-174 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
detectedSetCellReporting
(Detected set cell reporting)
no (RW) This attribute defines ifdetected cells shall bereported or not.
true
false
Default = false
dLPowerAvWindowSize
(Downlink power averagingwindow size)
yes(RW-LO)
Defines the averagingwindow size when limitedpower increase is used.
1 through 60 stepsize=1
Default = 15
dLTPCPattern
(Downlink transmit powercontrol pattern)
yes(RW-LO)
Determines the TransmitPower Control patternn thatis used on radio links thatare marked as the first radiolinks. This pattern is usedby the links before uplinksynchronization is achieved.
0 through 14 stepsize=1
Default = 14
dPCCHPowerOffsetCorrec-tionFactor
(dPCCH Power OffsetCorrection Factor)
no (RW-LO) Cell based correction factorfor the parameter used todetermine initial transmitpower of a new DTCH.
-50.0 through 50.0 stepsize=2.0
Default = 0.0
ecI0thr
(Ec/I0 threshold)
yes (RW) The threshold on theCommon Pilot Channel(CPICH) Ec/I0 to decide onthe downlink environmentstatus.
-24.0 through 0.0 stepsize=0.5
Default = -11.0
ecI0thrUL
(EcI0 uplink threshold)
no (RW) The threshold on the CPiCHEcI0 to decide on theUL_environment_status.
-24.0 through 0.0
Default = -8.0
eCIDEnableForEc
(ECID positioning enable,emergency clients)
no (RW) Enables/Disables ECIDpositioning method foremergency clients on a percell basis.
true
false
Default = true
eCIDEnableForNec
(ECID positioning enable,non-emergency clients)
no (RW) Enables/Disables ECIDpositioning method fornon-emergency clients on aper cell basis.
true
false
Default = true
emergencyCallRedirection-Required
(Emergency call redirectionrequired)
no (RW) This attribute indicateswhether the redirectionsolution is used.
true
false
Default = false
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-175
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
emergencyCallRedirection-WaitTime
(Emergency call redirectionwait time)
no (RW) This attribute defines thetime period the UE has towait before repeating therejected procedure.
1 through 15 stepsize=1
Default = 5
enableSIB12Indicator
(Enable system informationblock 12 indicator)
no (RW) Indicates whether SystemInformation Block 12(SIB12) should betransmitted.
true
false
Default = true
enableSIB6Indicator yes (RW) Indicates whether SystemInformation Block 6 (SIB6)should be transmitted.
sIB6INDICATOR_DISABLED
Default:sIB6INDICATOR_DISABLED
enableUEperiodicPMs
(Enable user equipmentperiodic performancemeasurements)
no (RW) Enables/Disables UEreporting QualityMeasurement Report fromwhich DL BLER, CPICHEC/IO and RSCP is derived.
true
false
Default = false
fACHMeaCycCoeff
(FACH measurementoccasion cycle lengthcoefficient)
no (RW) The FACH measurementoccasion cycle lengthcoefficient used to calculatethe measurement occasioncycle length used forinter-frequency andinter-system measurementswhile in CELL_FACH state.
1 through 8 step size=1
Default = 3
filterCoefficientDL yes(RW-LO)
The downlink loadmeasurement filtercoefficient determines theamount of filtering(averaging) to be applied fordownlink TSSImeasurements.
cOEFF_0
(Filter coefficient downlink) cOEFF_1
cOEFF_2
cOEFF_3
cOEFF_4
cOEFF_5
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-176 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
cOEFF_6
cOEFF_7
cOEFF_8
cOEFF_9
cOEFF_11
cOEFF_13
cOEFF_15
cOEFF_17
cOEFF_19
Default: cOEFF_6
filterCoefficientRACH no (RW-LO) The PRACH loadmeasurement filtercoefficient determines theamount of filtering to beapplied for acknowledgedPRACH preamblesmeasurements.
cOEFF_0
(Filter coefficient RACH) cOEFF_1
cOEFF_2
cOEFF_3
cOEFF_4
cOEFF_5
cOEFF_6
cOEFF_7
cOEFF_8
cOEFF_9
cOEFF_11
cOEFF_13
cOEFF_15
cOEFF_17
cOEFF_19
Default: cOEFF_6
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-177
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
filterCoefficientUL yes(RW-LO)
The uplink loadmeasurement filtercoefficient determines theamount of filtering(averaging) to be applied foruplink Received SignalStrength Indicator (RSSI)measurements.
cOEFF_0
(Filter coefficient uplink) cOEFF_1
cOEFF_2
cOEFF_3
cOEFF_4
cOEFF_5
cOEFF_6
cOEFF_7
cOEFF_8
cOEFF_9
cOEFF_11
cOEFF_13
cOEFF_15
cOEFF_17
cOEFF_19
Default: cOEFF_6
filterCoefficientULEDCH yes(RW-LO)
The Uplink LoadMeasurement FilterCoefficient determines theamount of filtering to beapplied for uplink loadmeasurements when E-DCHis enabled for the specificcell.
cOEFF_0
(Uplink Load MeasurementFilter Coefficient)
cOEFF_1
cOEFF_2
cOEFF_3
cOEFF_4
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-178 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
cOEFF_5
cOEFF_6
cOEFF_7
cOEFF_8
cOEFF_9
cOEFF_11
cOEFF_13
cOEFF_15
cOEFF_17
cOEFF_19
Default: cOEFF_6
forbCells1A
(Forbidden cells event 1A)
no (RW) This attribute defines cellsthat are not permitted toaffect the reporting rangefor event 1A.
Sequenceof 0 through32 records, using thefollowing value(s):
0 through 511 stepsize=1
No default
forbCells1B
(Forbidden cells event 1B)
no (RW) This attribute defines cellsthat are not permitted toaffect the reporting rangefor event 1B.
Sequenceof 0 through32 records, using thefollowing value(s):
0 through 511 stepsize=1
No default
forcePreferredUra
(Force preferred UTRANregistration area)
yes(RW-LO)
The UTRAN RegistrationArea (URA) that should beused by a UE that enters theURA_PCH state or exits itscurrent URA.
true
false
Default = false
gpsSanityRadius
(Global positioning systemsanity area radius)
no (RW) This attribute defines theradius of a circle (sanityarea) around the centre ofthe cell in which the RNCknows a UE to be.
1 through 50 stepsize=1
Default = 20
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-179
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
gSM2UMTSCellScalingFactor
(GSM to UMTS, cellscaling factor)
no (RW) This OAM parameterenables tuning of the targetcell to determine the area tobe covered by the initial DLtransmit power when radiolinks are handed over fromGSM to UMTS.
-10.0 through 10.0 stepsize=0.1
Default = 0.0
gsmToUmtsHandover
(GSM to UMTS Handover)
no (RW) The parameterenables/disables the GSM toUMTS handover feature ona per cell basis.
true
false
Default = true
hSDPAAndEDCHTotalD-LPower
(HSDPA and EDCH TotalDL Power)
yes (RW) Maximum value for thelinear sum of the power ofall the HS-PDSCH,HSSCCH, E-HICH,E-AGCH and E-RGCHcodes used in a cell.
0.0 through 50.0 stepsize=0.1
Default = 50.0
hysteresisTime
(Hysteresis time)
yes(RW-LO)
Load-measurementhysteresis time.
1000 through 30000step size=1000
Default = 2000
inAdjCells
(Incoming adjacent cells)
no (RO) The Distinguished Names(DNs) of the incomingadjacent cells that arerelated to this object.
Sequenceof 0 through9999 records, using thefollowing value(s):
String of characters
No default
inInterFreqFddAdjCells
(Incoming Inter-FrequencyCell Reselection relations)
no (RO) Incoming relations fromUTRAN Cells forInter-Frequency CellReselection and MobileAssisted Handover(ifCrsMaho).
Sequenceof 0 through9999 records, using thefollowing value(s):
String of characters
No default
inInterFreqFddAdjCells-Daho
(Incoming UTRAN cellrelations)
no (RO) Incoming relations fromUTRAN Cells for InterFrequency Database AssistedHandover (ifDaho).
Sequenceof 0 through9999 records, using thefollowing value(s):
String of characters
No default
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-180 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
initialEnvironmentStatus no (RW) The default environmentstatus for UL and DL forDBC admission check,which is used when no EcI0report was available duringtransition into Cell_DCHstate.
cELLEDGE
(Initial environment status) cELLCENTRE
Default: cELLEDGE
interFreqBorderCellToFDD
(Inter frequency FDD bordercell)
no (RW) Marks a cell as a border cellto another FDD frequency.
true
false
Default = false
interFreqCompressedMode
(Compressed ModeInter-frequency)
no (RW) Enables the use ofcompressed mode forinter-frequencymeasurements per cell.
true
false
Default = true
interFreqHOCellScaling-Factor
(Inter-frequency hand overscaling factor)
no (RW) This OAM parameterenables tuning of the targetcell to determine the area tobe covered by the initial DLtransmit power when radiolinks are handed overbetween two UMTSfrequencies.
-10.0 through 10.0 stepsize=0.1
Default = 0.0
interFreqLbMahoMeas2C
(Event 2C triggeringconfiguration data)
no (RW) Specifies the configurationdata, which is sent to andused by the UE to generatethe event triggeredmeasurement report 2C(MAHO).
See“Structure of LCellvalues” (p. 2-208).
Default = {4.0,
tIMETOTRIGGER_1280,
-12,
-12,
1.0}
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-181
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
interFreqQbDahoMeas2D
(Event 2D triggeringconfiguration data)
no (RW) Specifies the configurationdata, which is sent to andused by the UE to generatethe event triggeredmeasurement report 2D(DAHO).
See“Structure of LCellvalues” (p. 2-208).
Default = {-13,
-89,
2.0,
tIMETOTRIGGER_320,
1.0}
interFreqQbMahoActCM2D
(Inter frequency handoverconfiguration data(compressed modeactivation))
no (RW) Specifies the configurationdata which is sent to andused by the UE for thegeneration of the eventtriggered measurementreport 2D (MAHO).
See“Structure of LCellvalues” (p. 2-208).
Default = {-14,
-89,
tIMETOTRIGGER_320}
interFreqQbMahoDeactCM2F
(Compressed modedeactivation configurationdata)
no (RW) Specifies the configurationdata, which is sent to andused by the UE to generatethe event triggeredmeasurement report 2F(MAHO).
See“Structure of LCellvalues” (p. 2-208).
Default = {-11,
-81,
tIMETOTRIGGER_5000}
interFreqQbMahoMeas2B
(Event 2B triggeringconfiguration data)
no (RW) Specifies the configurationdata, which is sent to andused by the UE for thegeneration of the eventtriggered measurementreport 2B.
See“Structure of LCellvalues” (p. 2-208).
Default = {-11,
-89,
1.0,
0.0,
tIMETOTRIGGER_120,
-10,
-81,
1.0}
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-182 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
itfNDN
(Itf-N distinguished name)
yes (RW) The Distinguished Name(DN) of the Itf-N object thatis related to this instance.
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
lCellRefLA
(Location area of this cell)
yes(RW-LO)
Location Area that this cellbelongs to.
String of characters
No default
lCellRefRA
(Logical cell reference tothe routing area)
yes(RW-LO)
The Distinguished Name(DN) of the Routing Area(RA) object that is relatedto this logical cell.
String of characters
No default
lCellRefSACS
(Logical cell reference tothe service area circuitswitch)
yes(RW-LO)
The Distinguished Name(DN) of the Service AreaCircuit Switch (SACS)object that is related to thislogical cell.
String of characters
No default
lCellRefSAPS
(Logical cell reference tothe service area packetswitch)
yes(RW-LO)
The Distinguished Name(DN) of the Service AreaPacket Switch (SAPS)object that is related to thislogical cell.
String of characters
No default
lCellRefURAs
(Logical cell reference tothe UTRAN registrationarea)
yes(RW-LO)
The Distinguished Name(DN) of the UTRANRegistration Area (URA)object that is related to thisLogical Cell.
Sequenceof 1 through8 records, using thefollowing value(s):
See“Structure of LCellvalues” (p. 2-208).
Default is an emptysequence.
lCSReportLatitude
(Location services reportlatitude)
yes (RW) Latitude of UE geographicalposition informationassociated with a particularcell.
See“Structure of LCellvalues” (p. 2-208).
Default is an emptysequence.
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-183
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
lCSReportLongitude
(Location services reportlongitude)
yes (RW) Longitude of UEgeographical positioninformation associated witha particular cell.
See“Structure of LCellvalues” (p. 2-208).
Default is an emptysequence.
lCSUncertaintyRadius
(Location servicesuncertainty radius)
yes (RW) For an interior sector, theaverage distance from thecell site center to the equalpower boundary between thesector of interest and theadjacent cell(s) sector(s).For a perimeter sector, theaverage maximum range ofthe sector.
1 through 50000 stepsize=1
Default = 600
loadHysteresisTimeRACH
(Load hysteresis timeRACH)
no (RW-LO) This is the time duration forwhich the acknowledgedPRACH preambles valuemust be below the thresholdbefore a measurement reporton acknowledged PRACH istriggered.
10 through 60000 stepsize=10
Default = 1000
localCellID
(Local cell identity)
yes (RO-SC) The local cell identity is theunique identifier for a set ofphysical resources within aNode B able to support acell.
0 through 268435455step size=1
No default
logicalCellId
(Logical cell identity)
yes (RO-SC) The Logical Cell Identity(C-Id) is used as a uniqueidentifier of a logical cell(LCell) that is controlled bythe RNC.
0 through 65535 stepsize=1
No default
mahoByGsmMeasurements
(MAHO by GSMMeasurements )
no (RW) This parameterenables/disables themobile-assisted handover(MAHO) algorithm fortriggering the UMTS toGSM handover procedure.
true
false
Default = true
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-184 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
marketLabel
(Market label)
no (RW) Label being used to identifymarket of the FddExtCell,GsmExtCell, LCell, LNodeBand LRNC objects inplanning tools.
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
maxPagRec
(Maximum paging records)
no (RW-RR) Indicates the maximumnumber of paging recordscontained in a singlePAGING TYPE 1 message.
1 through 8 step size=1
Default = 8
maxTransmissionPower
(Maximum transmissionpower)
yes(RW-LO)
Maximum power for alldownlink channels addedtogether, that is allowedsimultaneously in a cell.
0.0 through 50.0 stepsize=0.1
Default = 43.0
measPeriod
(Measurement period)
yes(RW-LO)
The time period betweenconsecutive periodicmeasurement reports for theReceive Signal StrengthIndicator (RSSI) and theTransmit Signal StrengthIndicator (TSSI).
100 through 10000step size=100
Default = 1000
measurementPeriodLong
(Measurement period long)
yes (RW) The time period for theperiodic report on theReceived Signal StrengthIndicator (RSSI) from theNode B to the RNC.
1 through 3600 stepsize=1
Default = 30
measurementQuantityInter-FreqHO
no (RW) This parameter is used forinter-frequency hardhandover. It determines thequantity to be used formeasurements of the UMTSfrequencies.
rSCP
(Inter-frequency hardhandover measurementquantity)
eCN0
rSCP_ECN0
Default: rSCP_ECN0
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-185
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
measurementQuantityInter-RATCCO
no (RW) This parameter is used forinter-RAT Cell ChangeOrder from UTRAN to GSMfor PS connections. Itdetermines the quantity tobe used for measurements ofthe UMTS frequency.
rSCP
(Inter-RAT Cell ChangeOrder measurementquantity)
eCN0
rSCP_ECN0
Default: rSCP_ECN0
measurementQuantityIn-terRATHHO
no (RW) This parameter is used forinter-RAT hard handoverfrom UTRAN to GSM. Itdetermines the quantity tobe used for measurements ofthe UMTS frequency.
rSCP
(Inter-RAT hard handovermeasurement quantity)
eCN0
rSCP_ECN0
Default: rSCP_ECN0
measurementReporting no (RO) This attribute indicates whattype of measurementreporting is used.
pERIODIC
(Measurement reporting) eVENTTRIGGERED
Default:eVENTTRIGGERED
ndpLabel
(Network data provisioningcell label)
no (RW) Label used to identify thecell in the NDP planningtools.
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-186 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
noInSyncInd
(Number of in syncindicators)
yes (RW) The number of successive“in-sync” indications thatthe Node B must receivefrom its Layer 1 softwarebefore allowing a link tooperate in connected modeagain.
1 through 256 stepsize=1
Default = 2
noOutSyncInd
(Number of out of syncindicators)
yes (RW) The number of successive“out-of-sync” indicationsthat the Node B mustreceive from its Layer 1software before triggeringthe radio-link failureprocedure.
1 through 256 stepsize=1
Default = 5
numUsersDowngradeConC
(Congestion control userdowngrade)
no (RW) The number of PS datausers on DCH that arerequested to besimultaneously downgradedin case of congestioncontrol.
0 through 15 stepsize=1
Default = 1
numUsersDowngradeDBC
(Users to be downgraded)
no (RW) The number of low priorityPS data users on DCH thatare requested to besimultaneously downgradedin case QoS based DBCdowngrade is performed.
0 through 15 stepsize=1
Default = 2
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
outFDDAdjCells
(Outgoing FDD adjacentcells)
no (RW) The Distinguished Names(DNs) and the mostimportant attributes of theneighboring cells of theLCell which can belong toother RNCs as the LogicalRadio Network Controller(LRNC).
Sequenceof 0 through31 records, using thefollowing value(s):
See“Structure of LCellvalues” (p. 2-208).
Default is an emptysequence.
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-187
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
outFddToGsmCellsDaho
(Outgoing relations fromFDD to GSM cells fordatabase assisted handover)
no (RW) This attribute specifies theGSM cells to which this cellhas an outgoing relation forthe purpose of inter-systemDatabase Assisted Handover(DAHO).
Sequenceof 0 through3 records, using thefollowing value(s):
See“Structure of LCellvalues” (p. 2-208).
Default is an emptysequence.
outFddToGsmCellsDahoNQB
(GSM Neighbour Cells forDAHO Non-Quality Based)
no (RW) This parameter specifies theGSM target cells for databased assisted inter-systemhandover (includinginter-system directed retry)for triggers that arenon-quality based.
Sequenceof 0 through3 records, using thefollowing value(s):
See“Structure of LCellvalues” (p. 2-208).
Default is an emptysequence.
outGSMAdjCells
(Outgoing GSM adjacentcells)
no (RW) The neighboring GSM cellsthat are related to the LCell.
Sequenceof 0 through32 records, using thefollowing value(s):
See“Structure of LCellvalues” (p. 2-208).
Default is an emptysequence.
outInterFreqFDDAdjCells
(Inter-frequency NeighbourCells (MAHO))
no (RW) Defines a list of up to 32inter-frequency FDDneighbour cells per UTRANcell.
Sequenceof 0 through32 records, using thefollowing value(s):
See“Structure of LCellvalues” (p. 2-208).
Default is an emptysequence.
outInterFreqFddAdjCells-Daho
(Inter-frequency NeighbourCells (DAHO))
no (RW) Defines a list of up to 3UTRAN neighbour cells perUTRAN cell.
Sequenceof 0 through3 records, using thefollowing value(s):
See“Structure of LCellvalues” (p. 2-208).
Default is an emptysequence.
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-188 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
pCCPCHStatusInfo
(Primary common controlphysical channel statusinformation)
no (RO) The operational state andavailablity status of theP-CCPCH physical channelin the cell.
See“Structure of LCellvalues” (p. 2-208).
Default = {enabled,
empty}
pCPICHPower
(Primary common pilotchannel power)
yes (RW) Primary Common PilotChannel (P-CPICH)downlink power.
-10.0 through 50.0 stepsize=0.1
Default = 33.0
pCPICHStatusInfo
(Primary common pilotchannel status information)
no (RO) The operational state andavailablity status of theP-CPICH physical channelin the cell.
See“Structure of LCellvalues” (p. 2-208).
Default = {enabled,
empty}
pDU656minEcIoThreshold
(PDU 656 minimum EcIothreshold)
no (RW) Defines the minimum EcIolevel for setting up a PSRAB with a 656 bit PDUconfiguration.
-24.0 through 0.0 stepsize=0.5
Default = -5.0
persistHigh
(Persistency high)
yes (RW) This attribute is used by theRNC to determine thedynamic persistence level tothe UE depending onwhether the estimated uplinkload is greater or less thanattributethrCACUL.
1 through 8 step size=1
Default = 2
persistLow
(Persistency low)
yes (RW) This attribute is used by theRNC to determine thedynamic persistence level tothe UE depending onwhether the estimated uplinkload is greater or less thanattributethrCACUL.
1 through 8 step size=1
Default = 6
pLMNValueTag
(Public land mobile networkvalue tag)
no (RO) The initial value that shouldbe used for the PLMN ValueTag.
1 through 256 stepsize=1
Default = 1
pMaxCorrectionFactor
(Correction factor ofmaximum downlink power)
no (RW) Local correction to the valueof maxDLPower used todefine the DL dynamicrange of dedicated radiolinks.
-10.0 through 10.0 stepsize=0.1
Default = 0
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-189
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
pMinCorrectionFactor
(Correction factor ofminimum downlink power)
no (RW) Local correction to the valueof minDLPower used todefine the DL dynamicrange of dedicated radiolinks.
-10.0 through 10.0 stepsize=0.1
Default = 0
powerRaiseLimit
(Power raise limit)
yes(RW-LO)
The Power Raise Limitdefines the limit by whichthe transmit power of thedownlink DPCCH/DPDCHcan be raised during anInner Loop Power Control(ILPC) cycle.
0 through 10 stepsize=1
Default = 10
primaryScramblingCode
(Primary scrambling code)
yes(RW-LO)
The primary scramblingcode that is used for thiscell which is not controlledby the LRNC.
0 through 511 stepsize=1
No default
pSCHPower
(Primary synchronizationchannel power)
yes (RW) Defines the output powerlevel of the PrimarySynchronization Channel(P-SCH) physical channel.
-35.0 through 15.0 stepsize=0.1
Default = -3.0
pSCHStatusInfo
(Primary synchronizationchannel status information)
no (RO) The operational state andavailablity status of theP-SCH physical channel inthe cell.
See“Structure of LCellvalues” (p. 2-208).
Default = {enabled,
empty}
queueLength
(Queue length)
no (RW-RR) The paging message queuelength defines the length ofall paging queues in aparticular cell.
8 through 512 stepsize=8
Default = 128
readSFNIndicator
(Read system frame numberindicator)
yes(RW-LO)
Indicates to the UE whetherthe UE has to decode theSystem Frame Number(SFN) of the cell.
true
false
Default = true
refCellSP
(Reference cell serviceprofile)
yes(RW-LO)
Reference to the CellService Profile (CellSP) forthis LCell.
String of characters
No default
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-190 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
refPeerRncs
(Peer RNCs reference list)
no (RW) This is a list of peer RNC’swhich need knowledgeabout this cell even thoughit might not have anydefined outgoing neighbourrelations to this cell.
Sequenceof 0 through60 records, using thefollowing value(s):
Any valid string.
The maximum lengthis 24 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
refSIBRepProfile
(SIB repetition profile)
no (RW) This parameter indicates theSIB repetition combinationthat is used by the cell.
1 through 30 stepsize=1
Default = 6
reportingCriteria1A
(Reporting criteria event1A)
yes (RW) The attributes that are usedto define the reportingcriteria for event 1A.
See“Structure of LCellvalues” (p. 2-208).
Default = {1.0,
eVENTTRIGGREPORTAMOUNT_INFINITY,
rEPORTINGINTERVAL_1000,
4.0,
tIMETOTRIGGER_120,
0.0}
reportingCriteria1B
(Reporting criteria event1B)
yes (RW) The attributes that are usedto define the reportingcriteria for event 1B.
See“Structure of LCellvalues” (p. 2-208).
Default = {1.0,
5.0,
tIMETOTRIGGER_1280,
0.0,
eVENTTRIGGREPORTAMOUNT_INFINITY,
rEPORTINGINTERVAL_1000}
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-191
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
reportingCriteria1C
(Reporting criteria event1C)
yes (RW) The attributes that are usedto define the reportingcriteria for event 1C.
See“Structure of LCellvalues” (p. 2-208).
Default = {4.0,
eVENTTRIGGREPORTAMOUNT_INFINITY,
rEPORTINGINTERVAL_1000,
tIMETOTRIGGER_320}
rncRelationChangeCount
(RNC Relation ChangeCount)
no (RO) This attribute records thenumber of changes made tothe outgoing relation-relatedarray attributes of theFddExtCell.
0 through 2147483647step size=1
Default = 0
rSICause no (RO) This attribute contains thecause value provided in thelast RSI in which the C-IDof the LCell is referenced.
none
(RSI cause) dLResourceNotSup-ported
cellNotAvailable
powerLevelNotSup-ported
dLRadioResourcesNo-tAvailable
uLRadioResourcesNo-tAvailable
rLAlreadyActivat-edOrAllocated
nodeBResourcesUna-vailable
measurementNotSup-portedForObject
combiningResources-NotAvailable
requestedConfigura-tionNotSupported
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-192 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
synchronizationFailure
priorityTransportChan-nelEstablished
sIBOriginationIn-NodeBNotSupported
requestedTxDiversity-ModeNotSupported
rNL_Unspecified
bCCHSchedulingError
measurementTempo-rarilyNotAvailable
invalidCMSetting
reconfigurationCFN-NotElapsed
numberOfDLCodesNot-Supported
sCPICHNotSupported
combiningNotSup-ported
uLSFNotSupported
dLSFNotSupported
commonTrans-portChannelTypeNot-Supported
dedicatedTrans-portChannelTypeNot-Supported
downlinkSharedChan-nelTypeNotSupported
uplinkSharedChannel-TypeNotSupported
cMNotSupported
txDiversityNoLonger-Supported
unknownLocalCellID
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-193
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
numberOfULCodesNot-Supported
transportResource-Unavailable
transferSyntaxError
abstractSyntaxErrorRe-ject
abstractSyntaxErrorI-gnoreAndNotify
messageNotCom-patibleWithReceiver-State
semanticError
tL_unspecified
prot_unspecified
misc_unspecified
abstSyntErrFalsCon-structedMess
controlProcessingOver-load
hardwareFailure
oMIntervention
notEnoughUser-PlaneProcResources
unknownC_ID
Default: none
schedulingBlock1Enabled
(Scheduling Block 1enabled)
no (RW) Indicate whether to use ornot use Scheduling Block 1.
true
false
Default = true
sectorRadius
(Sector radius)
yes (RW) This attribute defines thesector radius used forlocation service based onenhanced cell id.
1 through 50000 stepsize=1
Default = 600
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-194 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sIB3AccClassBarred
(System information block 3access class barred)
yes (RW) Defines whether a cell isbarred for specific AccessClasses (ACs).
Sequenceof 16records, using thefollowing value(s):
true
false
No default
sIB3CellBarred yes (RW) Defines whether a cell isbarred (access to the cell isrestricted).
nOTBARRED
(System information block 3cell barred)
bARRED
Default: nOTBARRED
sIB3CellResExtension yes (RW) Defines whether a cell isreserved for future extension(access to the cell isrestricted).
rESERVED
(System information block 3cell reserved extension)
nOTRESERVED
Default:nOTRESERVED
sIB3CellResForOperatorUse yes (RW) Defines whether a cell isreserved for operator use(access to the cell isrestricted).
oPERATORRE-SERVED
(System information block 3cell reserved for operatoruse)
oPERATORNOTRE-SERVED
Default:oPERATORNOTRE-SERVED
sIB3CellResForSolSAUse yes (RW) Defines whether a cell isreserved for Support ofLocation Service Area(SoLSA) use (access to thecell is restricted).
sOLSARESERVED
(System information block 3cell reserved for support oflocation service area use)
sOLSANOTRE-SERVED
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-195
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default:sOLSANOTRE-SERVED
sIB3EnableSIB4Indicator
(System information block 3enable system informationblock 4 indicator)
yes (RW) Indicates whether SystemInformation Block 4 (SIB4)information is broadcast.
true
false
Default = false
sIB3IntraFreqCellReselectionyes (RW) Indicates whether the UE isallowed to perform the cellreselection procedure forcells that belong to the samefrequency as the barred cell.
nOTALLOWED
(System information block 3intra-frequency cellreselection indicator)
aLLOWED
Default: aLLOWED
sIB3MaxAllowedULTxPower
(System information block 3maximum allowed uplinktransmit power)
yes (RW) The maximum power thatthe UE is allowed to usewhen accessing the cell onPRACH in idle mode.
-50 through 33 stepsize=1
Default = 24
sIB3Qhyst1
(System information block 3quality hysteresis 1)
yes (RW) The ’quality hysteresis’value for cell reselectionprioritizing the ranking ofthe serving cell if CPICHRSCP is used as qualitymeasure.
0 through 40 stepsize=2
Default = 2
sIB3Qhyst2
(System information block 3quality hysteresis 2)
yes (RW) The ’quality hysteresis’value for cell reselectionprioritizing the ranking ofthe serving cell if CPICHEc/No is used as qualitymeasure.
0 through 40 stepsize=2
Default = 2
sIB3QQualMin
(SIB 3 Q quality minimum)
no (RW) The minimum requiredquality level that the UEmust receive from this cellbefore the cell is “valid” forthe selection and reselectionprocedures.
-24 through 0 stepsize=1
Default = -19
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-196 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sIB3QRXLevMin
(SIB 3 Q received levelminimum)
yes (RW) The minimum requiredreceive level that the UEmust receive from this cellbefore the cell is “valid” forthe selection and reselectionprocedures.
-115 through -25 stepsize=2
Default = -111
sIB3RAT
(System information block 3radio access technology)
no (RW) The attributes that are usedto determine whether the UEshould perform theinter-RAT measurementsduring cell (re)selection.
Sequenceof 0 through1 records, using thefollowing value(s):
See“Structure of LCellvalues” (p. 2-208).
Default is an emptysequence.
sIB3SInterSearch
(System information blocktype 3 thresholdinter-frequency search)
yes (RW) The threshold value that isused to determine whetherthe UE should performinter-frequencymeasurements.
-32 through 20 stepsize=2
Default = 6
sIB3SIntraSearch
(System information blocktype 3 thresholdintra-frequency search)
yes (RW) The threshold value that isused to determine whetherthe UE should performintra-frequencymeasurements forintra-frequency cellreselection.
-32 through 20 stepsize=2
Default = 10
sIB3SSearchHCS
(System information block 3S search hierarchical cellstructure)
no (RO) The threshold value that isused to determine whetherthe UE should performintra-frequency andinter-frequencymeasurements.
-105 through 91 stepsize=2
Default = 1
sIB3TBarred yes (RW) The period of time that theUE must wait beforechecking whether the statusof the barred cell haschanged.
tBARRED_10
(System information block 3timer barred)
tBARRED_20
tBARRED_40
tBARRED_80
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-197
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
tBARRED_160
tBARRED_320
tBARRED_640
tBARRED_1280
Default: tBARRED_20
sIB3TReselection
(System information block 3timer reselection)
yes (RW) The period of time forwhich the cell reselectioncriteria must be fulfilledbefore the new cell may beselected.
0 through 31 stepsize=1
Default = 1
sIB4CellBarred yes (RW) Defines whether a cell isbarred (access to the cell isrestricted) for UEs that arein connected mode.
nOTBARRED
(System information block 4cell barred)
bARRED
Default: nOTBARRED
sIB4CellResExtension yes (RW) Defines whether a cell isreserved for future extension(access to the cell isrestricted).
rESERVED
(System information block 4cell reserved extension)
nOTRESERVED
Default:nOTRESERVED
sIB4CellResForOperatorUse yes (RW) Defines whether a cell isreserved for operator use(access to the cell isrestricted) for the UEs thatare in connected mode.
oPERATORRE-SERVED
(System information block 4cell reserved for operatoruse)
oPERATORNOTRE-SERVED
Default:oPERATORNOTRE-SERVED
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-198 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sIB4CellResForSolSAUse yes (RW) Defines whether a cell isreserved for SoLSA use(access to the cell isrestricted) for the UEs thatare in connected mode.
sOLSARESERVED
(System information block 4cell reserved for support oflocation service area use)
sOLSANOTRE-SERVED
Default:sOLSANOTRE-SERVED
sIB4IntraFreqCellReselectionyes (RW) Indicates whether the UE isallowed to reselect cells thatbelong to the samefrequency as the barred cell.
nOTALLOWED
(System information block 4intra-frequency cellreselection indicator)
aLLOWED
Default: aLLOWED
sIB4MaxAllowedULTxPower
(System information block 4maximum allowed uplinktransmit power)
yes (RW) The maximum power thatthe UE is allowed to usewhen accessing the cell onPRACH in connected mode.
-50 through 33 stepsize=1
Default = 24
sIB4Qhyst1
(System information block 4quality hysteresis 1)
yes (RW) The “quality hysteresis”value for cell reselectionprioritizing the ranking ofthe serving cell if CPICHRSCP is used as qualitymeasure.
0 through 40 stepsize=2
Default = 2
sIB4Qhyst2
(System information block 4quality hysteresis 2)
yes (RW) The “quality hysteresis”value for cell reselectionprioritizing the ranking ofthe serving cell if CPICHEc/No is used as qualitymeasure.
0 through 40 stepsize=2
Default = 2
sIB4QQualMin
(SIB 4 Q quality minimum)
no (RW) The minimum quality levelin the cell forintra-frequency FDD cell(re)selection in connectedmode
-24 through 0 stepsize=1
Default = -19
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-199
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sIB4QRXLevMin
(SIB 4 Q received levelminimum)
yes (RW) The minimum requiredreceive level in the cell forcell (re)selection in theconnected mode.
-115 through -25 stepsize=2
Default = -111
sIB4RAT
(System information block 4radio access technology)
no (RW) The attributes that are usedto determine whether the UEshould perform theinter-RAT measurementsduring cell (re)selection.
Sequenceof 0 through1 records, using thefollowing value(s):
See“Structure of LCellvalues” (p. 2-208).
Default is an emptysequence.
sIB4SInterSearch
(System information blocktype 4 thresholdinter-frequency search)
yes (RW) The threshold value that isused to determine whetherthe UE should performinter-frequencymeasurements in connectedmode.
-32 through 20 stepsize=2
Default = 6
sIB4SIntraSearch
(System information blocktype 4 thresholdintra-frequency search)
yes (RW) The threshold value that isused to determine whetherthe UE should performintra-frequencymeasurements forintra-frequency cellre-selection.
-32 through 20 stepsize=2
Default = 10
sIB4SSearchHCS
(System information block 4S search hierarchical cellstructure)
no (RO) The threshold value that isused to determine whetherthe UE should performintra-frequency andinter-frequencymeasurements for ahierarchical cell structure inconnected mode.
-105 through 91 stepsize=2
Default = 1
sIB4TBarred yes (RW) The period of time that theUE must wait beforechecking whether the statusof the barred cell haschanged.
tBARRED_10
(System information block 4timer barred)
tBARRED_20
tBARRED_40
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-200 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
tBARRED_80
tBARRED_160
tBARRED_320
tBARRED_640
tBARRED_1280
Default: tBARRED_20
sIB4Treselection
(System information block 4timer reselection)
yes (RW) The period of time forwhich the cell reselectioncriteria must be fulfilledbefore the new cell may beselected.
0 through 31 stepsize=1
Default = 1
sIB7ExpirationTimerFactor yes (RW) The expiration time factorneeded to calculate theexpiration time when the UEhas to read the contents ofSystem Information Block 7(SIB7) again.
sIB7EXPIRATIONTIMERFACTOR1
(System information block 7expiration timer factor)
sIB7EXPIRATIONTIMERFACTOR2
sIB7EXPIRATIONTIMERFACTOR4
sIB7EXPIRATIONTIMERFACTOR8
sIB7EXPIRATIONTIMERFACTOR16
sIB7EXPIRATIONTIMERFACTOR32
sIB7EXPIRATIONTIMERFACTOR64
sIB7EXPIRATIONTIMERFACTOR128
sIB7EXPIRATIONTIMERFACTOR256
Default:sIB7EXPIRATIONTIMERFACTOR2
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-201
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sIB7MIBConcatenationIndication
(SIB 7 and MIBconcatenation)
no (RW) Indicate whether the BCHscheduler needs to considerconcatenation of SIB 7 andMIB.
true
false
Default = true
sSCHPower
(Secondary synchronizationchannel power)
yes (RW) The output power level ofthe SecondarySynchronization Channel(S-SCH) physical channel.
-35.0 through 15.0 stepsize=0.1
Default = -5.0
sSCHStatusInfo
(Secondary synchronizationchannel status information)
no (RO) The operational state andavailablity status of theS-SCH physical channel inthe cell.
See“Structure of LCellvalues” (p. 2-208).
Default = {enabled,
empty}
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
tCell yes(RW-LO)
The timing delay used fordefining the start of SCH,CPICH and the downlinkScrambling Code(s) in a cellrelative to the Node BFrame Number (BFN).
tC_0
(Timer cell) tC_1
tC_2
tC_3
tC_4
tC_5
tC_6
tC_7
tC_8
tC_9
No default
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-202 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
thrCAC2DL
(Downlink call admissionthreshold (HSDPA disabled))
no (RW) The downlink overloadthreshold at which a RadioResource Control (RRC)connection request for anon-emergency call will beblocked, when the HSDPA isdisabled in the specific cell..
0 through 100 stepsize=1
Default = 80
thrCAC2DLHSDPA
(Downlink call admissionthreshold (HSDPA enabled))
no (RW) The downlink call admissionthreshold at which a RadioResource Control (RRC)connection request for anon-emergency call will beblocked due to downlinkoverload, when HSDPA isenabled in the specific cell.
0 through 100 stepsize=1
Default = 80
thrCAC2UL
(Uplink call admissionthreshold)
no (RW) The uplink overloadthreshold at which a RadioResource Control (RRC)connection request for anon-emergency call will beblocked.
0 through 100 stepsize=1
Default = 100
thrCAC2ULEDCH
(Uplink call admissionthreshold, E-DCH enabled)
no (RW) The uplink call admissionthreshold is the loadpercentage at which an RRCconnection request for anon-emergency call will beblocked due to uplinkoverload, when E-DCH isenabled in the specific cell.
0 through 100 stepsize=1
Default = 80
thrCACDL
(Threshold call admissioncontrol downlink)
yes (RW) The downlink call admissionthreshold is the loadpercentage at which a newcall will be blocked due todownlink overload.
0 through 100 stepsize=1
Default = 75
thrCACDLHSDPA
(Downlink call admissionthreshold (HSDPA enabled))
yes (RW) The downlink call admissionthreshold at which a newcall will be blocked due todownlink overload, whenHSDPA is enabled in thespecific cell.
0 through 100 stepsize=1
Default = 75
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-203
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
thrCACUL
(Threshold call admissioncontrol uplink)
yes (RW) The uplink call admissionthreshold is the loadpercentage above which anew call will be blockeddue to uplink overload.
0 through 100 stepsize=1
Default = 100
thrCACULEDCH
(Uplink call admissionthreshold, E-DCH enabled)
yes (RW) The uplink call admissionthreshold is the loadpercentage at which a newcall will be blocked due touplink overload, whenE-DCH is enabled in thespecific cell.
0 through 100 stepsize=1
Default = 75
thrConCDL
(Threshold congestioncontrol downlink)
yes (RW) The downlink congestionthreshold is the loadpercentage at which theexisting data bearers will bedropped due to downlinkoverload.
0 through 100 stepsize=1
Default = 90
thrConCDLHSDPA
(Downlink congestioncontrol threshold (HSDPA))
yes (RW) The downlink congestionthreshold when HSDPA isenabled in the specific cell.
0 through 100 stepsize=1
Default = 90
thrConCUL
(Threshold congestioncontrol uplink)
yes (RW) The uplink congestionthreshold is the loadpercentage at which theexisting data bearers will bedropped due to uplinkoverload.
0 through 100 stepsize=1
Default = 100
thrConCULEDCH
(Uplink congestionthreshold, E-DCH enabled)
yes (RW) The uplink congestionthreshold is the loadpercentage, where one PSservice will be reduced dueto uplink overload, whenE-DCH is enabled in thespecific cell.
0 through 100 stepsize=1
Default = 90
thrDBCDL
(Threshold dynamic bearercontrol downlink)
yes (RW) The downlink dynamicbearer control threshold isthe load percentage at whicha request for a data servicewill be blocked due todownlink overload.
0 through 100 stepsize=1
Default = 50
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-204 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
thrDBCDLHSDPA
(PS and CS servicesallocation threshold (HSDPAenabled))
yes (RW) The downlink load thresholdused for the allocation of PSand CS services from 32kand higher, when HSDPA isenabled in the specific cell.
0 through 100 stepsize=1
Default = 50
thrDBCUL
(Threshold dynamic bearercontrol uplink)
yes (RW) The uplink dynamic bearercontrol threshold is the loadpercentage at which arequest for a data servicewill be blocked due touplink overload.
0 through 100 stepsize=1
Default = 90
thrDBCULEDCH
(Uplink load threshold,E-DCH enabled)
yes (RW) The uplink load thresholdused for the allocation of PSand CS services from 32kand higher, when E-DCH isenabled in the specific cell.
0 through 100 stepsize=1
Default = 50
thrISDRDL no (RW) Defines a downlink loadthreshold for inter-systemdirected retry.
iSDRALWAYS
(Threshold inter-systemdirected retry downlink)
iSDRThrDBC
iSDRThrCAC
iSDRNEVER
Default: iSDRThrCAC
thrISDRUL no (RW) Defines an uplink loadthreshold for inter-systemdirected retry.
iSDRALWAYS
(Threshold inter-systemdirected retry uplink)
iSDRThrDBC
iSDRThrCAC
iSDRNEVER
Default: iSDRThrCAC
thrRACH
(Threshold random accesschannel)
no (RW) The Random AccessChannel (RACH) thresholdis the RACH loadpercentage where thepersistency value ischanged.
0 through 100 stepsize=1
Default = 50
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-205
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
timeMeasureControl
(Time measurement control)
yes(RW-LO)
Determines the (daily) timewhen an uplinkmeasurement controlprocedure has to beperformed.
0 through 1435 stepsize=5
Default = 120
tRLFailure
(Timer radio link faillure)
yes (RW) Specifies the length of timethat the Node B must waitbefore sending the RADIOLINK FAILUREINDICATION message tothe RNC.
0 through 25500 stepsize=100
Default = 3000
uARFCNNd
(UTRA absolute radiofrequency channel numberdownlink)
yes(RW-LO)
This absolute numberrepresents the frequency thatis used in the downlinkdirection.
0 through 16383 stepsize=1
No default
uARFCNNu
(UTRA absolute radiofrequency channel numberuplink)
no (RO) This absolute numberrepresents the frequency thatis used in the uplinkdirection.
0 through 16383 stepsize=1
Default = 0
umts2GsmCCOQActCM2D
(UMTS to GSM CellChange Order activatecompressed mode)
no (RW) Defines the measurementcriteria for activation ofcompressed mode for CellChange Order from UMTSto GSM.
See“Structure of LCellvalues” (p. 2-208).
Default = {-111,
-16,
tIMETOTRIGGER_320}
umts2GsmCCOQDeactCM2F
(UMTS to GSM CellChange Order deactivatecompressed mode)
no (RW) Defines the measurementcriteria for deactivation ofcompressed mode for CellChange Order from UMTSto GSM.
See“Structure of LCellvalues” (p. 2-208).
Default = {-108,
-13,
tIMETOTRIGGER_5000}
umts2GsmCCOQTriggerDAHO
(UMTS to GSM CellChange Order trigger(DAHO))
no (RW) Defines the measurementcriteria to trigger CellChange Order from UMTSto GSM (DAHO).
See“Structure of LCellvalues” (p. 2-208).
Default = {-111,
-16,
tIMETOTRIGGER_320,
1.0}
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-206 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
umts2GsmCCOQTriggerMAHO
(UMTS to GSM CellChange Order trigger(MAHO))
no (RW) Defines the measurementcriteria to trigger CellChange Order from UMTSto GSM (MAHO).
See“Structure of LCellvalues” (p. 2-208).
Default = {-108,
-13,
tIMETOTRIGGER_120,
1.0}
umts2GsmQActCM2D
(UMTS to GSM activatecompressed mode)
no (RW) Contains UMTS to GSMHO measurement - UMTSquality to activatecompressed modeparameters.
See“Structure of LCellvalues” (p. 2-208).
Default = {-16,
-111,
tIMETOTRIGGER_320}
umts2GsmQDeactCM2F
(UMTS to GSM deactivatecompressed mode)
no (RW) Contains UMTS to GSMHO measurement - UMTSquality to deactivatecompressed modeparameters.
See“Structure of LCellvalues” (p. 2-208).
Default = {-13,
-108,
tIMETOTRIGGER_5000}
umts2GsmQTriggerDAHO
(UMTS to GSM Trigger,DAHO)
no (RW) Contains UMTS to GSMHO measurement - UMTSquality to trigger DAHO.
See“Structure of LCellvalues” (p. 2-208).
Default = {-16,
-111,
tIMETOTRIGGER_320,
1.0}
umts2GsmQTriggerMAHO
(UMTS to GSM Trigger,MAHO)
no (RW) Contains UMTS to GSMHO measurement - UMTSquality to trigger MAHO.
See“Structure of LCellvalues” (p. 2-208).
Default = {-13,
-108,
tIMETOTRIGGER_120,
1.0}
umtsFrequencyBand yes(RW-LO)
Indicates the frequency bandthat the cell supports.
bAND_I
(UMTS frequency band) bAND_II
bAND_III
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-207
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
bAND_IV
bAND_V
bAND_VI
bAND_VIII
bAND_IX
Default: bAND_I
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
useOfHCS no (RO) This attribute should be setif the cell belongs to aHierarchical Cell Structure(HCS).
hCSNOTUSED
Default:hCSNOTUSED
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of LCell values
The following table describes the value format used for the LCell object attribute.
Attribute Sequence of structure Values
aMR475Config codecEnable true
false
aMRThdDL 0 through 100 step size=1
aMRThdDLHSDPA 0 through 100 step size=1
aMRThdUL 0 through 100 step size=1
aMRThdULEDCH 0 through 100 step size=1
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-208 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
aMR59Config codecEnable true
false
aMRThdDL 0 through 100 step size=1
aMRThdDLHSDPA 0 through 100 step size=1
aMRThdUL 0 through 100 step size=1
aMRThdULEDCH 0 through 100 step size=1
aMR795Config codecEnable true
false
aMRThdDL 0 through 100 step size=1
aMRThdDLHSDPA 0 through 100 step size=1
aMRThdUL 0 through 100 step size=1
aMRThdULEDCH 0 through 100 step size=1
antennaAltitude direction height
depth
altitude 0.0 through 10000.0 step size=0.01
antennaLatitude degrees 0 through 90 step size=1
minutes 0 through 59 step size=1
seconds 0.0 through 59.999
antennaLatitude hemisphere northern
southern
antennaLongitude degrees 0 through 180 step size=1
minutes 0 through 59 step size=1
seconds 0.0 through 59.999
antennaLongitude hemisphere western
eastern
bCHStatusInfo operationalState enabled
disabled
bCHStatusInfo availability inTest
failed
powerOff
offLine
offDuty
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-209
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
dependency
degraded
notInstalled
logFull
empty
interFreqLbMahoMeas2C hysteresis 0.0 through 14.5 step size=0.5
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
nuldrThresholdFrequency -24 through 0 step size=1
nuhdrThresholdFrequency -24 through 0 step size=1
nuWeightingFrequency 0.0 through 2.0 step size=0.1
interFreqQbDahoMeas2D eCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
hysteresis 0.0 through 14.5 step size=0.5
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-210 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
weighting 0.0 through 2.0 step size=0.1
interFreqQbMahoActCM2DeCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
interFreqQbMahoActCM2DtimeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
interFreqQbMahoDeactCM2FeCN0Threshold -24 through 0 step size=1
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-211
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
rSCPThreshold -115 through -25 step size=1
interFreqQbMahoDeactCM2FtimeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
interFreqQbMahoMeas2B eCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
weighting 0.0 through 2.0 step size=0.1
hysteresis 0.0 through 14.5 step size=0.5
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-212 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
eCN0thrNonUsedFreq -24 through 0 step size=1
rSCPthrNonUsedFreq -115 through -25 step size=1
nuWeightingFrequency 0.0 through 2.0 step size=0.1
lCellRefURAs refURAs String of characters
lCellRefURAs preferredURA true
false
lCSReportLatitude hemisphere northern
southern
degrees 0 through 90 step size=1
minutes 0 through 59 step size=1
seconds 0.0 through 59.999
lCSReportLongitude hemisphere western
eastern
degrees 0 through 180 step size=1
minutes 0 through 59 step size=1
seconds 0.0 through 59.999
outFDDAdjCells refCell String of characters
timeDiffToCell 0 through 960 step size=1
choiceAccuracy tIMEDIFFACCURACY40
tIMEDIFFACCURACY256
tIMEDIFFACCURACY2560
nLSAPriority lOW
mEDIUM
hIGH
vERYHIGH
cellOffset -10.0 through 10.0 step size=0.5
relationId 0 through 2147483647 step size=1
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-213
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
ndpLabel 0 through 52
outFddToGsmCells-Daho
refCell String of characters
priority 1 through 3 step size=1
relationId 0 through 2147483647 step size=1
ndpLabel 0 through 52
outFddToGsmCellsDa-hoNQB
refCell String of characters
priority 1 through 3 step size=1
relationId 0 through 2147483647 step size=1
ndpLabel 0 through 52
outGSMAdjCells refCell String of characters
qOffset -50 through 50 step size=1
enableBroadcast true
false
enableMAHO true
false
cioForHO -50 through 50 step size=1
relationId 0 through 2147483647 step size=1
ndpLabel 0 through 52
outInterFreqFDDAdj-Cells
qOffset1 -50 through 50 step size=1
qOffset2 -50 through 50 step size=1
enableBroadcast true
false
enableMaho true
false
nLSAPriority lOW
mEDIUM
hIGH
vERYHIGH
refCell String of characters
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-214 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
relationId 0 through 2147483647 step size=1
ndpLabel 0 through 52
outInterFreqFddAdj-CellsDaho
refCell String of characters
priority 1 through 3 step size=1
relationId 0 through 2147483647 step size=1
ndpLabel 0 through 52
pCCPCHStatusInfo operationalState enabled
disabled
pCCPCHStatusInfo availability inTest
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
pCPICHStatusInfo operationalState enabled
disabled
pCPICHStatusInfo availability inTest
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
pSCHStatusInfo operationalState enabled
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-215
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
disabled
pSCHStatusInfo availability inTest
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
reportingCriteria1A hysteresis 0.0 through 7.5 step size=0.5
rcamtOfRep eVENTTRIGGREPORTAMOUNT_1
eVENTTRIGGREPORTAMOUNT_2
eVENTTRIGGREPORTAMOUNT_4
eVENTTRIGGREPORTAMOUNT_8
eVENTTRIGGREPORTAMOUNT_16
eVENTTRIGGREPORTAMOUNT_32
eVENTTRIGGREPORTAMOUNT_64
eVENTTRIGGREPORTAMOUNT_INFINITY
rcReportingInterval rEPORTINGINTERVAL_0
rEPORTINGINTERVAL_250
rEPORTINGINTERVAL_500
rEPORTINGINTERVAL_1000
rEPORTINGINTERVAL_2000
rEPORTINGINTERVAL_4000
rEPORTINGINTERVAL_8000
rEPORTINGINTERVAL_16000
reportingRange 0.0 through 14.5 step size=0.5
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-216 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
w 0.0 through 2.0 step size=0.1
reportingCriteria1B hysteresis 0.0 through 7.5 step size=0.5
reportingRange 0.0 through 14.5 step size=0.5
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-217
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_5000
w 0.0 through 2.0 step size=0.1
rcamtOfRep eVENTTRIGGREPORTAMOUNT_1
eVENTTRIGGREPORTAMOUNT_2
eVENTTRIGGREPORTAMOUNT_4
eVENTTRIGGREPORTAMOUNT_8
eVENTTRIGGREPORTAMOUNT_16
eVENTTRIGGREPORTAMOUNT_32
eVENTTRIGGREPORTAMOUNT_64
eVENTTRIGGREPORTAMOUNT_INFINITY
reportingCriteria1B rcReportingInterval rEPORTINGINTERVAL_0
rEPORTINGINTERVAL_250
rEPORTINGINTERVAL_500
rEPORTINGINTERVAL_1000
rEPORTINGINTERVAL_2000
rEPORTINGINTERVAL_4000
rEPORTINGINTERVAL_8000
rEPORTINGINTERVAL_16000
reportingCriteria1C hysteresis 0.0 through 7.5 step size=0.5
rcamtOfRep eVENTTRIGGREPORTAMOUNT_1
eVENTTRIGGREPORTAMOUNT_2
eVENTTRIGGREPORTAMOUNT_4
eVENTTRIGGREPORTAMOUNT_8
eVENTTRIGGREPORTAMOUNT_16
eVENTTRIGGREPORTAMOUNT_32
eVENTTRIGGREPORTAMOUNT_64
eVENTTRIGGREPORTAMOUNT_INFINITY
rcReportingInterval rEPORTINGINTERVAL_0
rEPORTINGINTERVAL_250
rEPORTINGINTERVAL_500
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-218 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
rEPORTINGINTERVAL_1000
rEPORTINGINTERVAL_2000
rEPORTINGINTERVAL_4000
rEPORTINGINTERVAL_8000
rEPORTINGINTERVAL_16000
reportingCriteria1C timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
sIB3RAT rATId rATIDGSM
rATIDCDMA2000
sLimitSearchRAT -32 through 20 step size=2
sSearchRAT -32 through 20 step size=2
sIB4RAT rATId rATIDGSM
rATIDCDMA2000
sLimitSearchRAT -32 through 20 step size=2
sSearchRAT -32 through 20 step size=2
sSCHStatusInfo operationalState enabled
disabled
sSCHStatusInfo availability inTest
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-219
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
umts2GsmCCOQActCM2DrSCPThreshold -115 through -25 step size=1
eCN0Threshold -24 through 0 step size=1
umts2GsmCCOQActCM2DtimeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
umts2GsmCCOQDeactCM2FrSCPThreshold -115 through -25 step size=1
eCN0Threshold -24 through 0 step size=1
umts2GsmCCOQDeactCM2FtimeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-220 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
umts2GsmCCOQTriggerDAHOrSCPThreshold -115 through -25 step size=1
eCN0Threshold -24 through 0 step size=1
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
weight 0.0 through 2.0 step size=0.1
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-221
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
umts2GsmCCOQTriggerMAHOrSCPThreshold -115 through -25 step size=1
eCN0Threshold -24 through 0 step size=1
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
weight 0.0 through 2.0 step size=0.1
umts2GsmQActCM2D eCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
umts2GsmQActCM2D timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-222 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
umts2GsmQDeactCM2F eCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
umts2GsmQDeactCM2F timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
umts2GsmQTriggerDAHOeCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
RNC object descriptions LCell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-223
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
weight 0.0 through 2.0 step size=0.1
umts2GsmQTriggerMAHOeCN0Threshold -24 through 0 step size=1
rSCPThreshold -115 through -25 step size=1
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
weight 0.0 through 2.0 step size=0.1
RNC object descriptions LCell
...................................................................................................................................................................................................................................
2-224 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
LNodeB...................................................................................................................................................................................................................................
Full name
Logical Node B
Description
This object represents the logical Node B network element view, from the managingRNC. The RNC manages the Node B functional resources through the Iub interfaceusing the Node B Application Part (NBAP) protocol.
Hierarchical location
Hierarchical location of the LNodeB object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an LNodeB object.
• Make sure that thenodeBIdentifier attribute value is unique within the network.
• Make sure that thetCell attribute value is unique within the scope of a parentLNodeB.
• Make sure that thelocalCellID attribute value is unique within the LNodeB.
Attributes
The following attributes apply to the LNodeB object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: locked
LRNC
LNodeB
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-225
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
cellResource
(Cell resource)
no (RO) The most importantinformation captured by theRNC of all the cells that aresupported by a Node B.
Sequenceof 0 through6 records, using thefollowing value(s):
See“Structure ofLNodeB values”(p. 2-229).
Default is an emptysequence.
comCtrlPortAvailability no (RO) The availability status of theCommon Control Port(CCP).
inTest
(Common control portavailability)
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
RNC object descriptions LNodeB
...................................................................................................................................................................................................................................
2-226 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
empty
Default: inTest
comCtrlPortID
(Common control portidentifier)
no (RO) The identifier of theCommon Control Port(CCP).
0 through 65535 stepsize=1
Default = 0
comCtrlPortOperational-State
no (RO) The operational state of theCommon Control Port(CCP).
enabled
(Common control portoperational state)
disabled
Default: enabled
dPASupported
(Dynamic Power Allocationsupported)
no (RW) This attribute indicateswhether Dynamic PowerAllocation (DPA) issupported when theconnected NodeB isequipped with RF-heads orwith radios of type MCR.
true
false
Default = true
inhibitAlarms
(Inhibit Alarms)
yes (RW) This boolean flag is used tosuppress alarms from theRNC when the NodeB is inpreprovisioned orunmanaged state.
true
false
Default = false
itfNDN
(Itf-N distinguished name)
yes (RW) The Distinguished Name(DN) of the Itf-N object thatis related to this instance.
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions LNodeB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-227
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
marketLabel
(Market label)
no (RW) Label being used to identifymarket of the FddExtCell,GsmExtCell, LCell, LNodeBand LRNC objects inplanning tools.
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
ndpLabel
(Network data provisioningcell label)
no (RW) Label used to identify thecell in the NDP planningtools.
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
nodeBIdentifier
(Node B identifier)
yes (RO-SC) A unique number thatidentifies this Node Bwithin the network.
0 through 2147483647step size=1
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
pDU656enabled
(PDU 656 enabled)
no (RW) Indicates if the use of 656bit RLC PDU for HSDPAtransfer is enabled on agiven Iur interface.
true
false
Default = false
pDU656IubTransportBandwidthAvailable
(PDU 656 Iub transportbandwidth available)
no (RW) Indicates if a specific ATMtransport profile iscompatible with the use ofthe 656 bit RLC PDU sizeconfiguration.
true
false
Default = false
refIuB
(Reference Iub)
no (RO) The Distinguished Name(DN) of the Iub object thatis related to this Node B.
String of characters
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
RNC object descriptions LNodeB
...................................................................................................................................................................................................................................
2-228 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
trafficWeightingFactor
(Node B traffic WeightingFactor)
yes (RW) This weighting factor isused to balance NodeB callprocessing time acrossavailable Solaris Blades.
1 through 100 stepsize=1
No default
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of LNodeB values
The following table describes the value format used for the LNodeB object attribute.
Attribute Sequence of structure Values
cellResource localCellId 0 through 268435455 step size=1
availabilityType inTest
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
RNC object descriptions LNodeB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-229
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
empty
dlCapCredit 0 through 65535 step size=1
ulCapCredit 0 through 65535 step size=1
ulComCapConsumpLaw 0 through 65535 step size=1
dlComCapConsumpLaw 0 through 65535 step size=1
ulDedCapConsumpLaw 0 through 65535 step size=1
dlDedCapConsumpLaw 0 through 65535 step size=1
maxDLPwr 0 through 500 step size=1
hsdpaCapable true
false
edchCapable true
false
edch2msTTICapability true
false
edchSFCapability cODES_SF256
cODES_SF128
cODES_SF64
cODES_SF32
cODES_SF16
cODES_SF8
cODES_SF4
cODES_2SF4
cODES_2SF2
cODES_2SF2AND2SF4
cellResource edchHARQCombining irCombCapable
chaseCombCapable
irAndChaseCombCapable
RNC object descriptions LNodeB
...................................................................................................................................................................................................................................
2-230 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
LRNC...................................................................................................................................................................................................................................
Full name
Local radio network controller
Description
This is a virtual object that represents an RNC controlled by the OMC-U. The LRNCis pre-created with an initial state of locked and is the root of the RNC object tree.
Hierarchical location
Hierarchical location of the LRNC object:
Object constraints and supported actions
You can modify this object.
The following list outlines the object constraints for modifying an LRNC object usingthe set command.
• Make sure thattransportChannelType is unique within the LRNC.
• Make sure that the SS7LinkSetadjacentPointCode is not the same as any otherSS7LinkSetadjacentPointCode within an LRNC.
• Make sure that theuARFCNNu only contains one of the list of uplink frequencies infreq.
• Make sure thatsecurityTimervalue ≤ overallSecurityTimer – 3.
• For longitude if degrees = 180, thenminutes andseconds must be 0.
• For latitude if degrees = 90, thenminutes andseconds must be 0.
• Make sure that the SS7LinkSetaESANetworkAddress is not the same as the LRNCaESANetworkAddress.
• Make sure that the SS7LinkSetaESANetworkAddress is not the same as any of theIuB alcapVCLs.alcapTLA values.
• Make sure that the LRNCaESANetworkAddress is not the same as the IuBalcapVCLs.alcapTLA.
• Make sure that the PRNCrNCId is unique within the LRNC.
• Make sure that the PRNCrNCId is not the same as the LRNCrNCId.
• Make sure that the FddExtCellrNCId is not the same as the LRNCrNCId.
LRNC
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-231
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
• Make sure that eachworkingSTM1OC3Port andprotectionSTM1OC3Port referencea unique GICCSTM1OC3Port object within the scope of an LRNC.
• Make sure that thesupportedPLMNType is set to “plmngsmmap”.
• Make sure that every element ofgICCs is unique within an LRNC.
• Make sure thatt312Idle × 1000≤ uERRCConnectionSetupResponseTimer.
• Make sure thatt308 < uERRCConnectionReleaseResponseTimer.
• Make sure thatthdLCSCellInfoTimer < thdLocationSupervisionTimer.
• Make sure thatthdLcsUeGpsPositionTimer < thdLocationSupervisionTimer.
• If IuCS and IuPS exist, make sure thatcnCsDrxCoefficient andcnPsDrxCoefficient take only values between 6 and 9.
• Make sure that RFTraceiMSI is unique within an LRNC.
• Make sure thattOutOfServiceTimer is greater than 2180 milliseconds.
• Make sure that SS7StackoriginatingPointCode is not the same as any one ofthe following: any SS7LinkSetadjacentPointCode, IuCSrANAPDestination-PointCode, any IuRrNSAPDesintationPointCode within an LRNC.
• Make sure that thethdLocationSupervisionTimer > (3 + thdLcsUeGpsPosi-tionTimer + thdLcsEcidPositionTimer).
• Make sure that no other IuR object reference the same PRNC asrefPrnc within anLRNC.
• Make sure that no other IuB object reference the same LNodeB asiuBRefLnodebwithin an LRNC.
• Make sure that the following attributes are unique within an LRNC:
– logicalCellId
– locationAreaCode
– routingAreaCode
– sACSCode
– sAPSCode
– uRAC.
• Make sure thatlongScramblingCodePoolStart + numOfBlocksToAllocate ×blockSize < 16777216.
• Make sure thatrNTIPoolStart + numOfBlocksToAllocate × blockSize <1048576.
• Make sure that the set offreq does not remove a frequency which is being usedby uARFCNNu.
The following list outlines the object constraints for modifying an LRNC object usingthe unlock command.
• Make sure that the LRNCresetRequired is “false” to allow the LRNC to beunlocked.
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-232 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attributes
The following attributes apply to the LRNC object and are available through the GUIand CLI.
Attribute/Name Required Description Value
ac0to9BarrEn
(Access class 0 to 9 barringenabled)
yes (RW) Indicates whether AccessClass Barring (ACB)overload protectionmechanism is allowed tototally or partially block allUEs that use Access Class(AC) 0 to 9 in a CoreNetwork (CN) overloadsituation.
true
false
Default = true
ac0to9Priority
(Access class 0 to 9Priority)
yes (RW) The overall priority thatshould be given to theAccess Class (AC) 0 to 9 ifblocking is needed in anoverload situation.
0 through 6 step size=1
Default = 0
ac10BarrEn
(Access class 10 barringenabled)
yes (RW) Indicates whether the AccessClass Barring (ACB)overload protectionmechanism is allowed tototally or partially block allUEs that use Access Class(AC) 10 in a CN overloadsituation.
true
false
Default = false
ac10Priority
(Access class 10 priority)
yes (RW) The overall priority thatshould be given to AccessClass (AC) 10 if blocking isneeded in an overloadsituation.
0 through 6 step size=1
Default = 0
ac11BarrEn
(Access class 11 barringenabled)
yes (RW) Indicates whether the AccessClass Barring (ACB)overload protectionmechanism is allowed tototally or partially block allUEs that use Access Class(AC) 11 in a CN overloadsituation.
true
false
Default = false
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-233
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
ac11Priority
(Access class 11 priority)
yes (RW) The overall priority thatshould be given to AccessClass (AC) 11 if blocking isneeded in an overloadsituation.
0 through 6 step size=1
Default = 0
ac12BarrEn
(Access class 12 barringenabled)
yes (RW) Indicates whether the AccessClass Barring (ACB)overload protectionmechanism is allowed tototally or partially block allUEs that use Access Class(AC) 12 in a CN overloadsituation.
true
false
Default = false
ac12Priority
(Access class 12 priority)
yes (RW) The overall priority thatshould be given to AccessClass (AC) 12 if blocking isneeded in an overloadsituation.
0 through 6 step size=1
Default = 0
ac13BarrEn
(Access class 13 barringenabled)
yes (RW) Indicates whether the AccessClass Barring (ACB)overload protectionmechanism is allowed tototally or partially block allUEs that use Access Class(AC) 13 in a CN overloadsituation.
true
false
Default = false
ac13Priority
(Access class 13 priority)
yes (RW) The overall priority thatshould be given to AccessClass (AC) 13 if blocking isneeded in an overloadsituation.
0 through 6 step size=1
Default = 0
ac14BarrEn
(Access class 14 barringenabled)
yes (RW) Indicates whether the AccessClass Barring (ACB)overload protectionmechanism is allowed tototally or partially block allUEs that use Access Class(AC) 14 in a CN overloadsituation.
true
false
Default = false
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-234 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
ac14Priority
(Access class 14 priority)
yes (RW) The overall priority thatshould be given to AccessClass (AC) 14 if blocking isneeded in an overloadsituation.
0 through 6 step size=1
Default = 0
ac15BarrEn
(Access class 15 barringenabled)
yes (RW) Indicates whether the AccessClass Barring (ACB)overload protectionmechanism is allowed tototally or partially block allUEs that use Access Class(AC) 15 in a CN overloadsituation.
true
false
Default = false
ac15Priority
(Access class 15 priority)
yes (RW) The overall priority thatshould be given to AccessClass (AC) 15 if blocking isneeded in an overloadsituation.
0 through 6 step size=1
Default = 0
actAccessBarrEn
(Active access barringenabled)
yes (RW) Indicates whether AccessClass Barring (ACB) isallowed when a CNoverload situation occurs.
true
false
Default = false
actualCellsPerRNC
(Actual number of cells perRNC)
no (RO) This attribute defines theactual number of singlecarrier cells per RNC at anygiven instance.
0 through 2997 stepsize=1
Default = 0
actualNodeBsPerRNC
(Actual number of Node Bsper RNC)
no (RO) This attribute defines thenumber of NodeBs per RNCat any given instance.
0 through 999 stepsize=1
Default = 0
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: locked
aESANetworkAddress
(ATM end system addressnetwork address)
yes(RW-RR)
The ATM End SystemAddress (AESA) of thedestination node thatterminates the AAL2 path.
String of characters
No default
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-235
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
backoutSoftwareVersion
(Backout software version)
no (RO) The backout softwareversion.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
backupImageName
(Backup image name)
no (RO) The name of the backupfile.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
backupImageProgress
(Backup image progess)
no (RO) Represents the progress ofthe backup process.
0 through 100 stepsize=1
Default = 0
backupStatus no (RO) The status of the latestbackup activity.
failed
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-236 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(Backup status) successful
inProgress
partialSuccess
notAvailable
Default: successful
cellChangeOrderFro-mUTRANRepetitionTime
(Cell Change Order fromUTRAN Repetition Time)
no (RW) This timer is used to delaysuccessive Cell ChangeOrder from UTRANattempts in case of failure.
0 through 30 stepsize=1
Default = 5
cellChangeOrderFro-mUTRANSupervisionTime
(Cell Change Order fromUTRAN timer)
no (RW) This timer is used tosupervise the Cell ChangeOrder from UTRANprocedure.
1 through 30 stepsize=1
Default = 30
cellDeletionTimer
(Cell deletion timer)
no (RW) The length of time theCRNC will await asuccessful or unsuccessfulresponse from a Node Bafter sending a CELLDELETION REQUESTmessage to the Node B.
0 through 65535 stepsize=1
Default = 60000
cellReconfigTimer
(Cell reconfiguration timer)
no (RW) The length of time theCRNC will await asuccessful or unsuccessfulresponse from a Node Bafter sending a CELLRECONFIGURATIONREQUEST message to theNode B.
1000 through 60000step size=1000
Default = 50000
cellSetupRequestTimer
(Cell setup request timer)
no (RW) The length of time theCRNC will await asuccessful or unsuccessfulresponse from a Node Bafter sending a CELLSETUP REQUEST messageto the Node B.
1000 through 60000step size=1000
Default = 50000
cipheringActivationTimeDLNotSRB2Delta
(Ciphering activation timedownlink not SRB2 delta)
yes (RW) This is a constant valuerelated to CipheringActivationTime_DL_NotSRB2.
0 through 255 stepsize=1
Default = 1
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-237
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
cipheringActivationTimeDLSRB2Delta
(Ciphering activation timedownlink SRB2 delta)
yes (RW) This is a constant valuerelated to CipheringActivationTime_DL_SRB2.
0 through 255 stepsize=1
Default = 4
clockSource
(Clock source)
no (RW) Clock source from whichthe 8 kHz backplane clockis extracted for the RNC.
0 through 1 step size=1
Default = 0
combinedInterFreqNeigh-bourhoodListSize
(Combined Inter-frequencyNeighbour List Size)
yes (RW) This parameter defines themaximumnumber ofinter-frequency neighbourcells that may be present inthe list produced by theinter-frequency NLSA.
0 through 32 stepsize=1
Default = 32
combinedNeighbour-hoodListSize
(Combined neighborhoodlist size)
yes (RW) This attribute defines themaximum number ofneighboring cells that maybe present in the listproduced by theNeighboring List SelectionAlgorithm (NLSA).
0 through 32 stepsize=1
Default = 32
comMeasInitReqTimer
(Common measurementinitiation request timer)
no (RW) The length of time theCRNC will await asuccessful or unsuccessfulresponse from a Node Bafter sending a COMMONMEASUREMENTINITIATION REQUESTmessage to the Node B.
0 through 65535 stepsize=1
Default = 60000
comTransChanDelTimer
(Common transport channeldeletion timer)
no (RW) The length of time theControlling Radio NetworkController (CRNC) willawait a successful orunsuccessful response froma Node B after sending aCOMMON TRANSPORTCHANNEL DELETIONREQUEST message to theNode B.
500 through 5000 stepsize=100
Default = 1500
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-238 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
comTransChanReconfig-Timer
(Common transport channelreconfiguration timer)
no (RW) The length of time theCRNC will await asuccessful or unsuccessfulresponse from a Node Bafter sending a COMMONTRANSPORT CHANNELRECONFIGURATIONREQUEST message to theNode B.
500 through 60000step size=100
Default = 15000
comTransChanSetupReq-Timer
(Common transport channelsetup request timer)
no (RW) The length of time theCRNC will await asuccessful or unsuccessfulresponse from a Node Bafter sending a COMMONTRANSPORT CHANNELSETUP REQUEST messageto the Node B.
500 through 60000step size=100
Default = 15000
currentSoftwareVersion
(Current software version)
no (RO) The version of the softwarethat is currently running onthe related component.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
delayTolHighAccuracyThd-ForEc
(Accuracy threshold,emergency services, DelayTolerance)
no (RW) This threshold is used todistinguish high accurracypositioning requests frommedium accuracypositioning requests foremergency services withResponse Time = DelayTolerance.
0 through 1806628step size=1
Default = 50
delayTolHighAccuracyThd-ForNec
(Accuracy threshold,non-emergency services,Delay Tolerance)
no (RW) This threshold is used todistinguish high accurracypositioning requests frommedium accuracypositioning requests fornon-emergency services withResponse Time = DelayTolerance.
0 through 1806628step size=1
Default = 50
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-239
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
delayTolMediumAccuracyTh-dForEc
(Accuracy threshold,emergency services, DelayTolerance)
no (RW) This threshold is used todistinguish medium accuracypositioning requests fromlow accuracy positioningrequests for emergencyservices with Response Time= Delay Tolerance.
0 through 1806628step size=1
Default = 400
delayTolMediumAccuracyTh-dForNec
(Accuracy threshold,non-emergency services,Delay Tolerance)
no (RW) This threshold is used todistinguish mediumaccurracy positioningrequests from low accuracypositioning requests fornon-emergency services withResponse Time = DelayTolerance.
0 through 1806628step size=1
Default = 400
eDCHActivation
(eDCH Activation)
no (RW) This parameter indicates ifthe RNC supports theE-DCH feature.
true
false
Default = true
enableAgpsForCommer-cialLBS
(Enable AGPS)
no (RW) Enables/Disables the AGPSfunctionality.
true
false
Default = false
enableCellChangeOrderFro-mUTRAN
no (RW) This parameters enables /disables the functionality totrigger Cell Change Orderfrom UTRAN to GSM forPS connections.
cCO_DISABLED
(UTRAN to GSM CellChange Order enable)
cCO_INTANDBACK
cCO_ALL
Default: cCO_ALL
enableHHOviaIuFor-SourceRNC
(Hard Hand Over via Iu)
no (RW) This parameterenables/disables thefunctionality to trigger HardHand Over with SRNSRelocation in the SourceRNC.
true
false
Default = true
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-240 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
enableMEOSEscalation
(Managed Element ObjectServer recovery flag)
no (RW) A flag to control whetherMEOS should attempt anescalated recovery for anymanaged object.
true
false
Default = true
expectedGiccOc3ModuleModeno (RW) This attribute indicates theexpected GICC HardwareMode (OC-3 interfaceMode) in the LRNCManaged Object.
sINGLEMODE
(Expected GICC hardwaremode (OC-3 interfacemode))
mULTIMODE
Default:sINGLEMODE
fallbackSoftwareVersion
(Fallback software version)
no (RO) The software version thatcan be used as fallback.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
filterConstantkNF
(Filter constant k noisefloor)
no (RW) This attribute specifies thefilter constant noise floorfor the uplink measurementcontrol procedure.
0.0 through 1.0
Default = 0.8571
freq
(Frequency)
yes(RW-RR)
The uplink UTRA AbsoluteRadio Frequency ChannelNumbers (UARFCNs) thatare supported on this RNC.
Sequenceof 1 through10 records, using thefollowing value(s):
See“Structure ofLRNC values”(p. 2-283).
Default is an emptysequence.
hhoWithRelocEnable
(Hard Hand Over withSRNS relocation)
no (RW) The operator can use thisattribute to enable or disableincoming SRNS Relocation(UE Involved).
true
false
Default = true
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-241
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
hoRelocGuardTimer
(Handover relocation guardtimer)
yes (RW) The handover relocationguard timer defines theminimum time forre-triggering a relocation fora new handover attempt, ifthe previous handoverattempt was not successful.
5 through 60 stepsize=1
Default = 10
hoToUtranCompleteTimer
(Handover to UTRANComplete Timer)
no (RW) This parameter defines thetime the RNC waits for theUE access to the UMTStarget cell in the case of aGSM to UMTS handover.
1 through 60 stepsize=1
Default = 20
hSDPAActivation
(High speed downlinkpacket access activation)
no (RW) This attribute indicates ifthe RNC supports theHSDPA feature.
true
false
Default = false
hSDPADiscardTimer no (RW) This attribute defines thetime to live for a MAC-hsSDU starting from theinstant of its arrival into anHSDPA Priority Queue.
hSDPADiscardTimer_0
(High speed downlinkpacket access discard timer)
hSDPADiscardTimer_20
hSDPADiscardTimer_40
hSDPADiscardTimer_60
hSDPADiscardTimer_80
hSDPADiscardTimer_100
hSDPADiscardTimer_120
hSDPADiscardTimer_140
hSDPADiscardTimer_160
hSDPADiscardTimer_180
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-242 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
hSDPADiscardTimer_200
hSDPADiscardTimer_250
hSDPADiscardTimer_300
hSDPADiscardTimer_400
hSDPADiscardTimer_500
hSDPADiscardTimer_750
hSDPADiscardTimer_1000
hSDPADiscardTimer_1250
hSDPADiscardTimer_1500
hSDPADiscardTimer_1750
hSDPADiscardTimer_2000
hSDPADiscardTimer_2500
hSDPADiscardTimer_3000
hSDPADiscardTimer_3500
hSDPADiscardTimer_4000
hSDPADiscardTimer_4500
hSDPADiscardTimer_5000
hSDPADiscardTimer_7500
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-243
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default:hSDPADiscardTimer_2000
hSDPADiscardTimer-Streaming
no (RW) Defines for a StreamingRAB over HSDPA the time(in milliseconds) to live fora MAC-hs SDU startingfrom the instant of itsarrival into an HSDPAPriority Queue.
hSDPADiscardTimer_0
(HSDPA discard timerstreaming)
hSDPADiscardTimer_20
hSDPADiscardTimer_40
hSDPADiscardTimer_60
hSDPADiscardTimer_80
hSDPADiscardTimer_100
hSDPADiscardTimer_120
hSDPADiscardTimer_140
hSDPADiscardTimer_160
hSDPADiscardTimer_180
hSDPADiscardTimer_200
hSDPADiscardTimer_250
hSDPADiscardTimer_300
hSDPADiscardTimer_400
hSDPADiscardTimer_500
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-244 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
hSDPADiscardTimer_750
hSDPADiscardTimer_1000
hSDPADiscardTimer_1250
hSDPADiscardTimer_1500
hSDPADiscardTimer_1750
hSDPADiscardTimer_2000
hSDPADiscardTimer_2500
hSDPADiscardTimer_3000
hSDPADiscardTimer_3500
hSDPADiscardTimer_4000
hSDPADiscardTimer_4500
hSDPADiscardTimer_5000
hSDPADiscardTimer_7500
Default:hSDPADiscardTimer_2000
hSDPAMacHsWindowSize no (RW) Attribute in the ARQprocedure for MAC-hs PDUretransmission.
hSDPAMacHsWindowSize_4
(High speed downlinkpacket access MAC-hswindow size)
hSDPAMacHsWindowSize_6
hSDPAMacHsWindowSize_8
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-245
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
hSDPAMacHsWindowSize_12
hSDPAMacHsWindowSize_16
hSDPAMacHsWindowSize_24
hSDPAMacHsWindowSize_32
Default:hSDPAMacHsWindowSize_32
hSDPAMobilityThreshold
(High speed downlinkpacket access mobilitythreshold)
no (RW) This attribute is used tojudge the mobility of aHSDPA capable UE.
1 through 255 stepsize=1
Default = 1
hSDPASrvCellChgCrit
(High speed downlinkpacket access serving cellchange)
no (RW) The attributes which arenecessary to configure event1D “Change of best cellwithin the active set” for theserving HS-DSCH cellchange procedure.
See“Structure ofLRNC values”(p. 2-283).
Default = {1.0,
tIMETOTRIGGER_640,
true}
hSDPAT1 no (RW) This timer indicates whenProtocol Data Units (PDUs)are released to the upperlayers even though there areoutstanding PDUs withlower sequence values.
hSDPAT1_10
(High speed downlinkpacket access timer 1)
hSDPAT1_20
hSDPAT1_30
hSDPAT1_40
hSDPAT1_50
hSDPAT1_60
hSDPAT1_70
hSDPAT1_80
hSDPAT1_90
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-246 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
hSDPAT1_100
hSDPAT1_120
hSDPAT1_140
hSDPAT1_160
hSDPAT1_200
hSDPAT1_300
hSDPAT1_400
Default: hSDPAT1_200
immediateDlRbReconG-brRab
(Immediate radio bearerreconfiguration)
no (RW) This attribute determines ifthe RNC should perform animmediate UE radio bearerreconfiguration following atrigger for RABModification of the DLGuaranteed Bit Rate.
true
false
Default = false
initialHsdpaUplinkRateRA-BEstablish
no (RW) The maximum uplink datarate that will be assigned atinitial RAB establishmentfor a HSDPA connection.
pSDATARATE_8
(Initial HSDPA uplink rate) pSDATARATE_32
pSDATARATE_64
pSDATARATE_128
pSDATARATE_384
Default:pSDATARATE_64
initialNoiseFloor
(Initial noise floor)
no (RW) This attribute specifies theinitial noise floor for theuplink measurement controlprocedure.
-112.0 through -50.0step size=0.1
Default = -102.0
initialUplinkRateRABEstab-lish
no (RW) The maximum uplink datarate that will be assigned atinitial RAB establishmentfor a DCH connection.
pSDATARATE3_64
(initial_Uplinkrate_RABEstablish)
pSDATARATE3_128
pSDATARATE3_384
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-247
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default:pSDATARATE3_384
integrityProtectionError-Counter
(Integrity protection errorcounter)
no (RO) Threshold of cumulatedintegrity checking failuresby the UE above which therelease of the RRCconnection shall betriggered.
0 through 15 stepsize=1
Default = 3
interFreqHandover
(Inter-frequency Handover)
no (RW) Enables the Inter-frequencyHard Handover Feature perRNC.
true
false
Default = false
interFreqHoProcedureTimer
(Inter-frequency HandoverProcedure Timer)
no (RW) This parameter specifies atimer to supervise theinter-frequency handoverprocedure.
1000 through 10000step size=1
Default = 8000
interFreqHoWaitTime
(RNC load based HHOdelay)
no (RW) Defines the time the RNCwill wait for the nextinter-frequency handoverattempt due to load.
1000 through 30000step size=1
Default = 5000
interFreqMeasFilterCoeffi-cient
no (RW) This parameter defines thefilter coefficient of the lowpass filter in the UE for theinter-frequencymeasurement.
cOEFF_0
(Inter-frequencymeasurement filtercoefficient)
cOEFF_1
cOEFF_2
cOEFF_3
cOEFF_4
cOEFF_5
cOEFF_6
cOEFF_7
cOEFF_8
cOEFF_9
cOEFF_11
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-248 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
cOEFF_13
cOEFF_15
cOEFF_17
cOEFF_19
Default: cOEFF_3
interRatLongScrambling-CodePoolSize
(inter-RAT Long ScramblingCode Pool Size)
yes(RW-RR)
Defines the size of the poolfor reduced uplinkscrambling codes to be usedfor incoming inter-RATHandover.
0 through 8191 stepsize=1
No default
interRatLongScrambling-CodePoolStart
(inter-RAT Long ScramblingCode Pool Start)
yes(RW-RR)
Defines the start of the poolfor reduced uplinkscrambling codes to be usedfor incoming inter-RAThandover.
0 through 8191 stepsize=1
No default
interSystemDirectedRetry-LoadBased
(Inter-system directed retryload-based)
no (RW) This attributeenables/disables theload-based inter-systemdirected retry.
true
false
Default = true
interSystemHandoverEmer-gencyCall
no (RW) Indicates whether emergencycalls should be handed overto GSM using Inter-SystemDirected Retry or immediateInter-System Handover afterRAB establishment or keptin UMTS.
iSEC_DISABLED
(Emergency call handoverflag)
iSEC_ISDR_ALL
iSEC_ISDR_NONGPS
iSEC_ISHO_ALL
iSEC_ISHO_NONGPS
Default:iSEC_DISABLED
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-249
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
interSystemHOe911Time
(Emergency call handovertimer)
no (RW) This attribute determines thelength of time for which thehandover to GSM of anemergency call will be triedbefore the attempt isaborted.
1 through 30 stepsize=1
Default = 6
intraFrequencyHHOvi-aIuDelay
(intra-frequency Hard HandOver delay)
no (RW) This parameter is used fordelaying intra-frequencyHard Hand Over (HHO) viaIu.
See“Structure ofLRNC values”(p. 2-283).
Default = {2000,
0.5}
itfNDN
(Itf-N distinguished name)
yes (RW) The Distinguished Name(DN) of the Itf-N object thatis related to this instance.
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
iubEmergencyCallPreEmp-tionCapability
yes (RW) This attribute indicates thepre-emption capability to setfor the Node B radio bearersfor an emergency call.
shallNotTriggerPre-Emption
(Iub emergency callpre-emption capability)
mayTriggerPreEmption
Default:shallNotTriggerPre-Emption
iubEmergencyCallPreEmp-tionVulnerability
yes (RW) This attribute indicates thepre-emption vulnerability toset for the Node B radiobearers for an emergencycall.
notPreEmptable
(Iub emergency callpre-emption vulnerability)
preEmptable
Default:notPreEmptable
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-250 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
iubEmergencyCallPriori-tyLevel
(Iub emergency call prioritylevel)
yes (RW) This attribute indicates thelevel of priority to set forthe Node B radio bearers foran emergency call.
1 through 15 stepsize=1
Default = 2
iuEmergencyCallPreEmp-tionCapability
yes (RW) This attribute indicates thepre-emption cababilityassigned by the attachedMSC in the core networkfor an emergency call.
shallNotTriggerPre-Emption
(Iu emergency callpre-emption capability)
mayTriggerPreEmption
Default:mayTriggerPreEmption
iuEmergencyCallPreEmp-tionVulnerability
yes (RW) This attribute indicates thepre-emption vulnerabilityassigned by the attachedMSC in the core networkfor an emergency call.
notPreEmptable
(Iu emergency callpre-emption vulnerability)
preEmptable
Default:notPreEmptable
iuEmergencyCallPriori-tyLevel
(Iu emergency call prioritylevel)
yes (RW) This attribute indicates thelevel of priority assigned bythe attached MSC in thecore network for anemergency call.
1 through 15 stepsize=1
Default = 2
iuReleaseCoordinationTimer
(Iu release coordinationtimer)
yes (RW) The time the source RNCwill wait for an IURELEASE COMMANDfrom the SGSN, after theRNC has received an IURELEASE COMMANDfrom the MSC indicatingthat the relocation wassuccessful.
1 through 100 stepsize=1
Default = 20
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-251
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
lastBackupTime
(Last backup time)
no (RO) The date-and-time stamp ofthe last successful backup.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
latitude
(Latitude)
yes (RW) The geographical position ofthe network element.
See“Structure ofLRNC values”(p. 2-283).
Default = {0,
0,
0,
northern}
listAllowedEncryptionAlgo-rithm
yes (RW) The allowed encryptionalgorithms, per decreasingpriority.
uEA1
(List allowed encryptionalgorithm)
noEncryption
Default: uEA1
loadBalance yes (RW) This attribute is used todisable and enable theautomatic load-balancingthat is triggered by theoverload condition.
dISABLED
(Load balance) eNABLED
Default: dISABLED
loadBasedInterFreqHan-dover
(RNC load based HHOEnable)
no (RW) Enables Inter-frequencyHard Handover due to loadper RNC.
true
false
Default = false
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-252 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
locationName
(Location name)
no (RW) The physical location of thiselement.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
longitude
(Longitude)
yes (RW) The geographical position ofthe network element.
See“Structure ofLRNC values”(p. 2-283).
Default = {0,
0,
0,
western}
longScramblingCodePool-Size
(Long scrambling code poolsize)
yes(RW-RR)
The size of the pool of longscrambling codes. The RNCuses this pool to assignscrambling codes to the UE.
1 through 1047552step size=1
Default = 1047552
longScramblingCodePool-Start
(Long scrambling code poolstart)
yes(RW-RR)
The starting point for thepool of long scramblingcodes. The RNC uses thispool to assign scramblingcodes to the UE (for theuplink only).
8192 through16777215 step size=1
No default
lowDelayHighAccuracyThd-ForEc
(Accuracy threshold,emergency services, LowDelay)
no (RW) This threshold is used todistinguish medium accuracypositioning requests fromlow accuracy positioningrequests for emergencyservices with Response Time= Low Delay.
0 through 1806628step size=1
Default = 400
lowDelayHighAccuracyThd-ForNec
(Accuracy threshold,non-emergency services,Low Delay)
no (RW) This threshold is used todistinguish medium accuracypositioning requests fromlow accuracy positioningrequests for non-emergencyservices with Response Time= Low Delay.
0 through 1806628step size=1
Default = 400
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-253
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
marketLabel
(Market label)
no (RW) Label being used to identifymarket of the FddExtCell,GsmExtCell, LCell, LNodeBand LRNC objects inplanning tools.
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
maxCellsPerRNC
(Maximum cells per RNC)
no (RO) This attribute defines thesoft limit for maximumnumber of single carriercells allowed per RNC.
0 through 2997 stepsize=1
Default = 750
maxNodeBsPerRNC
(Maximum Node Bs perRNC)
no (RO) This attribute defines thesoft limit for maximumnumber of NodeBs allowedper RNC.
0 through 999 stepsize=1
Default = 250
maxRRCConnReleaseRetries
(Maximum radio resourcecontrol connection releaseretries)
yes (RW) Maximum number of retriesof RRC CONNECTIONRELEASE messages to aUE to increase theprobability of properreception of the message bythe UE.
0 through 2147483647step size=1
Default = 1
maxRRCConnSetupRetries
(Maximum radio resourcecontrol connection setupretries)
yes (RW) Maximum number of retriesthat the Serving RNC maysend for an RRCCONNECTION SETUPmessage.
0 through 7 step size=1
Default = 2
maxUlIbRateStreamingH-sRabEstablish
no (RW) Defines the maximum ULI/B rate to be initiallyassigned to a UE duringStreaming HSDPA RABestablishment.
pS_8
(Maximum UL I/B ratestreaming HSDPA RABestablishment)
pS_64
Default: pS_8
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-254 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
mCC
(Mobile country code)
yes(RW-RR)
Identifies the country towhich a PLMN belongs.
Sequenceof 3 records,using the followingvalue(s):
0 through 9 step size=1
No default
mimVersion
(Management informationmodel version)
no (RO) The version of theManagement InformationModel (information model)that is supported by thismanagement agent.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
minRateForEDCH
(Minimum CN requestedrate for E-DCH)
no (RW) This is the minimum CNrequested rate which a UEwill be assigned to anE-DCH.
0 through 1000 stepsize=1
Default = 33
minRateForHSDSCH
(Minimum CN requestedrate for HS-DSCH)
no (RW) This is the minimum CNrequested rate which a UEwill be assigned to anHS-DSCH.
0 through 1000 stepsize=1
Default = 33
minTAinterval
(Minimum time alignmentinterval)
no (RW) This timer is used toindicate the period that anRNC is not allowed to starttime alignment to avoidoscillation in the timealignment handling over theIu interface.
0 through 20000 stepsize=100
Default = 5000
mNC
(Mobile network code)
yes(RW-RR)
Identifies a PLMN within acountry.
Sequenceof 2 through3 records, using thefollowing value(s):
0 through 9 step size=1
No default
multicastIPSubnetMask
(Multicast IP subnetmask)
no (RO) The subnetmask associatedwith the multicast IPaddress. The netmask isused to determine the sizeof the network address andthe host number.
String of characters
Default =255.255.192.0
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-255
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
n300
(N300)
yes (RW) The maximum number oftimes that the UE is allowedto send the RRCCONNECTION REQUESTmessage.
0 through 7 step size=1
Default = 5
n301
(N301)
yes (RW) The maximum number oftimes that the UE is allowedto send the RRCCONNECTIONRE-ESTABLISHMENTREQUEST message.
0 through 7 step size=1
Default = 2
n302
(N302)
yes (RW) The maximum number oftimes that the UE is allowedto send the CELL UPDATEmessage.
0 through 7 step size=1
Default = 5
n303
(N303)
yes (RW) The maximum number oftimes that the UE is allowedto retransmit the URAUPDATE message.
0 through 7 step size=1
Default = 3
n304
(N304)
yes (RW) The maximum number oftimes that the UE is allowedto retransmit the UECAPABILITYINFORMATION message.
0 through 7 step size=1
Default = 2
n308
(N308)
yes (RW) The maximum number oftimes that the UE is allowedto retransmit the RRCCONNECTION RELEASECOMPLETE message.
1 through 8 step size=1
Default = 1
n310
(N310)
yes (RW) The maximum number oftimes that the UE is allowedto retransmit the PUSCHCAPACITY REQUESTmessage.
0 through 7 step size=1
Default = 4
n312Connected yes (RW) The number of successive“in sync” indications thatthe UE must receive fromits Layer 1 software whenthe UE is operating inconnected mode.
n312_1
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-256 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(N312 connected) n312_50
n312_100
n312_200
n312_400
n312_600
n312_800
n312_1000
Default: n312_1
n312Idle yes (RW) The number of successive“in sync” indications thatthe UE must receive fromthe Layer 1 software whenthe UE is operating in idlemode.
n312_1
(N312 idle) n312_50
n312_100
n312_200
n312_400
n312_600
n312_800
n312_1000
Default: n312_1
n313 yes (RW) Maximum number ofsuccessive “out of sync”messages that the UE mayreceive from the layer 1software.
n313_1
(N313) n313_2
n313_4
n313_10
n313_20
n313_50
n313_100
n313_200
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-257
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default: n313_50
n315 yes (RW) The number of successive“in sync” indications thatare received from the Layer1 software in the periodduring which timer T313 isactivated.
n315_1
(N315) n315_50
n315_100
n315_200
n315_400
n315_600
n315_800
n315_1000
Default: n315_1
nBAPAuditRequestGuard-Timer
(NBAP audit request guardtimer)
no (RW) The length of time theCRNC will await asuccessful or unsuccessfulresponse from a Node Bafter sending an AUDITREQUEST message to theNode B.
1000 through 60000step size=1000
Default = 50000
nBAPDedicatedMeasInit-GuardTimer
(NBAP dedicatedmeasurement initiationguard timer)
no (RW) The length of time theCRNC will await asuccessful or unsuccessfulresponse from a Node Bafter sending aDEDICATEDMEASUREMENTINITIATION REQUESTmessage to the Node B.
0 through 65535 stepsize=1
Default = 2000
nBAPOCNSTimer
(NBAP OCNS timer)
no (RW) This attribute specifies theNBAP Orthogonal ChannelNoise Simulator (OCNS)timer.
0 through 65535 stepsize=1
Default = 60000
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-258 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
newDownloadVersion
(New download version)
no (RO) The newly downloadedversion.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
newInstalledVersion
(New installed version)
no (RO) The newly installed version. Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
nUtranPageRep
(Number of UTRAN pagingrepetitions)
no (RW) The maximum number ofretransmissions of theUTRAN initiated pagingmessages.
0 through 7 step size=1
Default = 3
oamIpAddress
(Operations, administrationand maintenance internetprotocol address)
no (RW) The Operations,Administration andMaintenance (OAM) IPaddress of this networkelement agent.
String of characters
Default = 0.0.0.0
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
overallSecurityTimer
(Overall security timer)
yes (RW) The guard timer for theoverall supervision of thesecurity procedure.
1 through 58 stepsize=1
Default = 8
pagingPriority
(Paging priority)
yes (RW) The applicable pagingpriority for the pagingrequests that are originatedfrom this network entity.
1 through 3 step size=1
Default = 1
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-259
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
pDU656enabled
(PDU 656 enabled)
no (RW) Indicates if the use of 656bit RLC PDU for HSDPAtransfer is enabled on agiven Iur interface.
true
false
Default = false
pDU656minDLRABdatarate
(PDU 656 minimum DLRAB database)
no (RW) Defines the threshold valuefor the downlink maximumbit rate that is requested bythe CN during a PS RABRANAP RAB assignmentprocedure.
1 through 16000000step size=1
Default = 14000000
pDU656minHSDPSCHnumber
(PDU 656 minimumHSDPSCH number)
no (RW) Defines the minimumnumber of HSDPSCHconfigured on the targetHSDPA cell for setting up aPS RAB with a 656 bit PDUconfiguration.
1 through 15 stepsize=1
Default = 10
percentageUEperiodicPMs
(Percentage of userequipment periodicperformance measurements)
no (RW) Percentage of UEs per RNCto send UE measurementreports.
10 through 100 stepsize=1
Default = 10
perfMeasEnabled yes (RW) Allows the operator toenable or disableperformance measurementcollection.
yes
(Performance measurementsenabled)
no
Default: yes
periodUEperiodicPMs
(Period between userequipment performancemeasurements)
no (RW) Time period betweenperiodic qualitymeasurement reports sent bythe UE.
2 through 20 stepsize=1
Default = 20
phyReestabRetriesPCHDCH
(Physical reestablishmentretries URA_PCH toCell_DCH)
yes (RW) The maximum number oftransmissions of the CELLUPDATE CONFIRMmessage when the UE hasfailed to obtain physicalchannel synchronization.
1 through 8 step size=1
Default = 2
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-260 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
phySharedChanReconTimer
(Physical Shared ChannelReconfiguration Requestresponse timer)
no (RW) This parameter indicates themaximum time that the RNCshould wait for a responsefrom the NodeB for theNBAP Physical SharedChannel ReconfigurationRequest message.
0 through 65535 stepsize=1
Default = 10000
prefixItfNDN
(Itf-N DN prefix)
no (RW) Prefix for the Itf-NDistinguished Name (DN)related to this instance.
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
qOSPriorityMappingTable
(QOS Priority MappingTable)
yes (RW) Provides mapping from ARPand/or UMTS QoS classesto R99 DCH call priority,HSDPA scheduling priorityand EDCH schedulingpriority.
Sequenceof 9 through18 records, using thefollowing value(s):
See“Structure ofLRNC values”(p. 2-283).
Default is an emptysequence.
quickRepeatdownSigInt
(Quick repeat downlinksignaling interval)
yes (RW) Interval between quickrepeat messagetransmissions for theCommon Control Channel(CCCH) Iur transfer.
0 through 1000 stepsize=1
Default = 50
quickRepeatInterval
(Quick repeat interval)
yes (RW) The interval betweensuccessive transmissions ofthe CELL UPDATE messageon the Forward AccessChannel (FACH) CommonControl Channel (CCCH) toimprove message reliability.
100 through 1000 stepsize=100
Default = 100
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-261
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
quickRepeatRNSAPdownSig
(Quick repeat RadioNetwork SubsystemApplication Part (RNSAP)downlink signaling)
yes (RW) Number of repeattransmissions of theCommon Control Channel(CCCH) Iur transfermessage. For example: RRCCONNECTION RELEASEmessage.
0 through 5 step size=1
Default = 2
rABCommitLatencyTime
(Radio access bearer commitlatency time)
no (RW) This is an offset in terms ofa frame number from thecurrent Connection FrameNumber (CFN) and is usedto calculate the time atwhich the Node B commitsand the UE activates a newconfiguration.
0 through 255 stepsize=1
Default = 90
rABinactivityMPDP
(RAB inactivity time)
no (RW) This parameter is the RABinactivity time applied whenmultiple I/B RABs exist torelease down from twoRABs to one RAB.
0 through 65535 stepsize=1
Default = 20
rABreleaseMinRateGbrRab
(RAB Guaranteed bit raterelease)
no (RW) Determines whether a PSRAB with Guaranteed bitrate is released when thedetermined UE qualitythresholds have beenexceeded .
true
false
Default = false
radioLinkFailureDeletionRe-sponseTimer
(Radio link failure deletionresponse timer)
no (RW) Guard timer to allow timefor the normal operation ofthe handover and powercontrol algorithm to delete aradio link affected by a lossof synchronization or forre-synchronization to occurwhen the radio link is oneof several associated with aUE connection.
0 through 2147483647step size=1
Default = 2000
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-262 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
radioLinkFailureResynchro-nisationResponseTimer
(Radio link failurere-synchronization responsetimer)
no (RW) Guard timer to allow timefor re-synchronization tooccur when a loss ofsynchronization is detectedon the last or only radiolink associated with a UEconnection.
0 through 2147483647step size=1
Default = 200
reconfigRetriesPCHDCH
(Reconfiguring retriesURA_PCH to Cell_DCH)
yes (RW) This is the maximumnumber of transmissions ofthe CELL UPDATECONFIRM message whenreconfiguring a UE fromURA_PCH to Cell_DCHstate.
1 through 8 step size=1
Default = 2
reconfigTimePCHDCH
(Reconfiguring timeURA_PCH to Cell_DCH)
yes (RW) The interval betweenretransmissions of the CELLUPDATE CONFIRMmessage due to the time-outof physical channelestablishment.
0 through 5000 stepsize=100
Default = 1500
reconPCHret
(Reconfiguration PCH retry)
yes (RW) This is the maximumnumber of PHYSICALCHANNELRECONFIGURATIONmessages which may betransmitted before the UE issent to idle mode.
0 through 10 stepsize=1
Default = 3
resetRequired
(Reset required)
no (RO) This attribute tells theoperator if an attribute waschanged that requires a resetof the RNC to becomeeffective.
true
false
Default = false
rNCId
(RNC identity)
yes(RW-RR)
The unique identifier of anRNC node within aUniversal Terrestrial RadioAccess Network (UTRAN)is the RNC Identifier(RNC-Id).
0 through 4095 stepsize=1
No default
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-263
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
rNSAPDedicatedMeasInit-GuardTimer
(RNSAP dedicatedmeasurement initiationguard timer)
no (RW) The length of time theServing RNC (SRNC) willawait a successful orunsuccessful response froma Drift RNC (DRNC) aftersending a DEDICATEDMEASUREMENTINITIATION REQUESTmessage to the DRNC.
0 through 65535 stepsize=1
Default = 2000
rRCReEstablishCS
(Circuit Switched RRCEstablishment)
no (RW) This parameterenables/disables the Circuitswitched (CS) part of theRRC ConnectionRe-Establishment feature perRNC.
true
false
Default = true
schedMaintenanceInhibit
(Scheduled maintenanceinhibit)
no (RW) This attribute is used toinhibit or allow scheduledmaintenance activities.
true
false
Default = false
schedMaintenanceTime
(Scheduled maintenancetime)
no (RW) This is the scheduledmaintenance time of the dayto recover things such asdegraded resources.
0 through 1439 stepsize=1
Default = 130
securityTimervalue
(Security timer value)
yes (RW) The guard timer forsupervision of the securityprocedure.
1 through 55 stepsize=1
Default = 5
segmentSIBTimer
(Segment SIB timer)
no (RW) This attribute indicates themaximum response timefrom the Node B after theRNC sends the NBAPSYSTEM INFORMATIONUPDATE REQUESTmessage.
1000 through 60000step size=1000
Default = 50000
sf16codesPerGBRhsdpaAdmission
(SF16 codes per GBRHSDPA admission)
no (RW) The number of SF16 codesrequired per 100kbps ofGuaranteed bit rate allocatedto HSDPA in order to admita new GBR user onto theHS-DSCH.
0.0 through 16.0 stepsize=0.01
Default = 0.5
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-264 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sf16codesPerGBRhsdpaDCA
(SF16 codes per GBRHSDPA DCA)
no (RW) The amount of additionalSF16 codes to allocate toHSDPA per 100kbps ofGuaranteed bit rate allocatedto HSDPA.
0.0 through 16.0 stepsize=0.01
Default = 1.0
sHOeDCHReconfigTimer
(Soft Handover DCHRreconfiguration timer)
no (RW) This timer value is usedwhen deciding toreconfigure a PS connection,currently running onUL-DCH, back to E-DCH.
0 through 60 stepsize=1
Default = 10
sIBChangeIndInterval
(System information blockchange indication interval)
no (RW) The interval betweensuccessive SYSTEMINFORMATION CHANGEINDICATION messages.
0 through 100 stepsize=1
Default = 10
sIBChangeIndRepeater
(System information blockchange indication repeater)
no (RW) The number of quickrepetitions of the SYSTEMINFORMATION CHANGEINDICATION message.
0 through 5 step size=1
Default = 1
sIBRepProfile
(SIB repetition profile)
yes (RW) The repetition duration forScheduling Block 1, SIB 1,SIB 2, SIB 3, SIB 4, SIB 5,SIB7, SIB 11, SIB 12 andSIB 18.
Sequenceof 9 through30 records, using thefollowing value(s):
See“Structure ofLRNC values”(p. 2-283).
Default is an emptysequence.
sIBRepProfileUsage
(SIB repetition profileusage)
no (RO) This parameter indicateswhether a SIB repetitionprofile is in use by any cellcontrolled by the RNC.
Sequenceof 9 through30 records, using thefollowing value(s):
See“Structure ofLRNC values”(p. 2-283).
Default is an emptysequence.
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-265
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sRNSRelocationForPSAl-lowed
(SRNS relocation for PSallowed)
no (RW) This parameter is used toallow or not allow thetriggering of SRNSRelocation for the PSDomain on the SRNC,depending on whether thePRNC can accept SRNSRelocation for the PSDomain.
true
false
Default = true
srnsRelocationWithHHOC-ompleteTime
(Serving RNS RelocationWith HHO Complete Timer)
no (RW) This timer is used in theTarget RNC to supervise thereceipt of the Hard HandOver complete messagefrom the UE in case of aSRNS Relocation of typeUE involved.
10 through 1000 stepsize=1
Default = 100
standardCallPreEmptionCa-pability
yes (RW) Indicates the pre-emptioncapability to set for theradio bearers for a standardcall.
shallNotTriggerPre-Emption
(Standard call pre-emptioncapability)
mayTriggerPreEmption
Default:shallNotTriggerPre-Emption
standardCallPreEmptionVul-nerability
yes (RW) Indicates the pre-emptionvulnerability to set for theradio bearers for a standardcall.
notPreEmptable
(Standard call pre-emptionvulnerability)
preEmptable
Default:notPreEmptable
standardCallPriorityLevel
(Standard call priority level)
yes (RW) Indicates the level ofpriority to set for the radiobearers for a standard call.
1 through 15 stepsize=1
Default = 14
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-266 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
coldStandby
providingService
Default: notSupported
streamingHsdpaRCgBRdelta
(Streaming HSDPA RC GBRdelta)
no (RW) This parameter is the deltaapplied to the GBR value,which defines the minimumrate in the rate controller, togenerate the maximum rateGBR+DGBR.
0.0 through 10.0 stepsize=0.1
Default = 0.2
suCommitActionStatus no (RO) This attribute indicates thesoftware update commitaction progress result.
sUCOMMITUNDE-FINED
(Software update commitaction status)
sUCOMMITSUCCESS
sUCOMMITFAILED
sUCOMMITIN-PROGRESS
Default:sUCOMMITUNDE-FINED
suDeleteActionStatus no (RO) This attribute indicates thesoftware update deleteaction progress result.
sUDELETEUNDE-FINED
(Software update deleteaction status)
sUDELETESUCCESS
sUDELETEFAILED
sUDELETEIN-PROGRESS
Default:sUDELETEUNDE-FINED
suGetPkgInfoStatus no (RO) The attribute indicates the“suGetPkgInfo” actionprogress result.
sUGETPKGINFOUN-DEFINED
(Software update getpackage information status)
sUGETPKGINFOSUC-CESS
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-267
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sUGETPKGINFO-FAILED
sUGETPKGINFOIN-PROGRESS
Default:sUGETPKGINFOUN-DEFINED
suGetVersionsStatus no (RO) The attribute indicates the“suGetVersions” actionprogress result.
sUGETVERSIONSUN-DEFINED
(Software update getversions status)
sUGETVERSIONSUC-CESS
sUGETVERSIONS-FAILED
sUGETVERSIONSIN-PROGRESS
Default:sUGETVERSIONSUN-DEFINED
supportedPLMNType no (RO) Identifies the type(s) ofnetwork protocol that aresupported by the PublicLand Mobile Network(PLMN).
pLMNGSMMAP
(Supported PLMN type) pLMNANSI_41
pLMNGSMMAPANDANSI_41
Default:pLMNGSMMAP
suPrecheckActionResult no (RO) This attribute indicates thepre-check result before thesoftware update action iscarried out.
sUPRECHECKUNDE-FINEDRESULT
(Software update pre-checkaction result)
sUPRECHECKSUC-CESS
sUPRECHECKFAILED
sUPRECHECK-WARNING
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-268 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sUPRECHECKREJEC-TION
sUPRECHECKIN-PROGRESS
sUPRECHECKFAIL-COMMITREQ
sUPRECHECKFAILF-WUPDATEREQ
Default:sUPRECHECKUNDE-FINEDRESULT
suPrecheckActionType no (RO) This attribute indicates theaction type before thesoftware update action iscarried out.
sUPRECHECKUNDE-FINEDACTION
(Software update pre-checkaction type)
sUPRECHECKDOWN-LOAD
sUPRECHECKIN-STALL
sUPRECHECKLOAD-INSTALL
sUPRECHECKACTI-VATE
sUPRECHECKACTI-VATEBACKOUT
sUPRECHECKFALL-BACK
sUPRECHECK-BACKOUT
sUPRECHECKDE-LETE
sUPRECHECK-COMMIT
sUPRECHECKAPPLY
sUPRECHECKDE-APPLY
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-269
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sUPRECHECKAPPLY-DEAPPLY
sUPRECHECKFWUP-DATE
Default:sUPRECHECKUNDE-FINEDACTION
suProgressIndicatorNumber
(Software update progressindicator number)
no (RO) This attribute indicates thesoftware update actionprocedure completion rate inpercentage.
0 through 100 stepsize=1
Default = 0
suProgressIndicatorString
(Software update progressindicator string)
no (RO) This attribute indicates thesoftware update actionprocedure completion status.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
suspectPMThresholdPer-centage
no (RW) This parameter provides thethreshold for setting thesuspect flag in the PM resultfile.
0 through 100 stepsize=1
Default = 50
suState no (RO) The state of thesoftware-upgrade process.
sUINVALIDSTATE
(Software update state) dOWNLOADIN-PROGRESS
dOWNLOADCOM-PLETE
dOWNLOADFAILED
iNSTALL-INPROGRESS
iNSTALLCOMPLETE
iNSTALLFAILED
sWITCHOVERIN-PROGRESS
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-270 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
aCTIVATEIN-PROGRESS
aCTIVATECOMPLETE
aCTIVATEFAILED
pARTIALLYACTI-VATED
fALLBACKIN-PROGRESS
fALLBACKCOM-PLETE
fALLBACKFAILED
pARTIALFALLBACK
aBORTED
lOCKINPROGRESS
lOCKCOMPLETE
lOCKFAILED
uNLOCKIN-PROGRESS
uNLOCKCOMPLETE
uNLOCKFAILED
cHECKINPROGRESS
cHECKCOMPLETE
cHECKFAILED
gRRESTART
cOMMITIN-PROGRESS
cOMMITFAILED
cOMMITCOMPLETE
bACKOUTIN-PROGRESS
bACKOUTFAILED
bACKOUTCOM-PLETE
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-271
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
pARTIALLY-BACKOUT
dOWNLOAD-ABORTED
iNSTALLABORTED
aCTIVATEABORTED
fALLBACKABORTED
bACKOUTABORTED
dELETEINPROGRESS
dELETECOMPLETE
dELETEFAILED
nOTUPGRADED
aCTCOMPTPUPAR-TIALACT
bACKCOMPTPUPAR-TIALBACK
fBACKCOMPTPU-PARTIALFBACK
aCTCOMPESCNO-TUPGRADED
bACKCOMPESCNO-TUPGRADED
fBACKCOMPESCNO-TUPGRADED
aCTCOMPACNOTUP-GRADED
bACKCOMPACNO-TUPGRADED
fBACKCOMPACNO-TUPGRADED
aPPLYINPROGRESS
aPPLYCOMPLETE
aPPLYFAILED
aPPLYABORTED
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-272 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
dEAPPLYIN-PROGRESS
dEAPPLYCOMPLETE
dEAPPLYFAILED
dEAPPLYABORTED
uNEQP
aUTORECOVER-RESTART
fWUPDATEIN-PROGRESS
fWUPDATECOM-PLETE
fWUPDATEFAILED
fWUPDATEABORTED
Default:cHECKCOMPLETE
t300 yes (RW) The length of time that theUE has to wait for apositive or negative reactionafter sending an RRCCONNECTION REQUESTmessage to the Node B.
t300_100
(Timer 300) t300_200
t300_400
t300_600
t300_800
t300_1000
t300_1200
t300_1400
t300_1600
t300_1800
t300_2000
t300_3000
t300_4000
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-273
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
t300_6000
t300_8000
Default: t300_2000
t301 yes (RW) The length of time that theUE has to wait for apositive or negative reactionafter sending an RRCCONNECTIONRE-ESTABLISHMENTREQUEST message to theNode B.
t301_100
(Timer 301) t301_200
t301_400
t301_600
t301_800
t301_1000
t301_1200
t301_1400
t301_1600
t301_1800
t301_2000
t301_3000
t301_4000
t301_6000
t301_8000
Default: t301_2000
t302 yes (RW) The length of time that theUE has to wait for apositive reaction aftersending a CELL UPDATEmessage to the Node B.
t302_100
(Timer 302) t302_200
t302_400
t302_600
t302_800
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-274 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
t302_1000
t302_1200
t302_1400
t302_1600
t302_1800
t302_2000
t302_3000
t302_4000
t302_6000
t302_8000
Default: t302_1200
t304 yes (RW) The length of time that theUE has to wait for apositive reaction aftersending a UE CAPABILITYINFORMATION message tothe Node B.
t304_100
(Timer 304) t304_200
t304_400
t304_1000
t304_2000
Default: t304_2000
t305 yes (RW) The length of time that theUE must wait beforetransmitting the CELLUPDATE message.
t305_NOUPDATE
(Timer 305) t305_5
t305_10
t305_30
t305_60
t305_120
t305_360
t305_720
Default: t305_30
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-275
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
t307 yes (RW) Timer 307 starts if timer305 has expired and the UEdetects “out of servicearea”. When timer 307expires the UE transits toidle mode.
t307_5
(Timer 307) t307_10
t307_15
t307_20
t307_30
t307_40
t307_50
Default: t307_30
t308 yes (RW) The length of time that theUE has to wait for apositive or incorrectresponse after sending anRRC CONNECTIONRELEASE COMPLETEmessage to the Node B.
t308_40
(Timer 308) t308_80
t308_160
t308_320
Default: t308_160
t309
(Timer 309)
no (RW) This parameter indicates themaximum time the UE hasto change cell.
1 through 8 step size=1
Default = 8
t310
(Timer 310)
yes (RW) The length of time that theUE has to wait for apositive reaction aftersending a PUSCHCAPACITY REQUESTmessage to the Node B.
40 through 320 stepsize=40
Default = 160
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-276 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
t311
(Timer 311)
yes (RW) Timer 311 starts after theUE receives the PHYSICALSHARED CHANNELALLOCATION messagewhere the CHOICE“PUSCH allocation” is setto “PUSCH allocationpending”. The timer isstopped after thePHYSICAL SHAREDCHANNEL ALLOCATIONmessage is received wherethe CHOICE “PUSCHallocation” is set to“PUSCH allocationassignment”.
250 through 2000 stepsize=250
Default = 2000
t312Connected
(Timer 312 connected mode)
yes (RW) The guard timer indicatesthe period during which UElayer 1 must be “in sync”before it is allowed tooperate in connected mode.
1 through 15 stepsize=1
Default = 2
t312Idle
(Timer 312 idle)
yes (RW) This guard timer indicatesthe period during which UElayer 1 must be “in sync”before it is allowed tooperate in idle mode.
1 through 15 stepsize=1
Default = 1
t313
(Timer 313)
yes (RW) This guard timer indicatesthe period during which UElayer 1 must be “out ofsync” before the UEconsiders that a radio-linkfailure has occurred.
0 through 15 stepsize=1
Default = 3
t314 yes (RW) Timer 314 starts when thecriteria for radio-link failureare fulfilled. The timer stopswhen the Cell Updateprocedure has beencompleted.
t314_0
(Timer 314) t314_2
t314_4
t314_6
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-277
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
t314_8
t314_12
t314_16
t314_20
Default: t314_6
t315 yes (RW) Timer 315 starts when thecriteria for radio-link failureare fulfilled. The timer stopswhen the Cell Updateprocedure has beencompleted.
t315_0
(Timer 315) t315_10
t315_30
t315_60
t315_180
t315_600
t315_1200
t315_1800
Default: t315_30
t316 yes (RW) Timer 316 starts when theUE detects “out of servicearea” in the URA_PCH orCELL_PCH state. Timer 316stops when the UE detects“in service area”.
t316_0
(Timer 316) t316_10
t316_20
t316_30
t316_40
t316_50
t316_INFINITY
Default: t316_30
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-278 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
t317 yes (RW) Timer 317 starts when timer316 expires and the UEdetects “out of servicearea”. Timer 317 stops whenthe UE detects “in servicearea”.
t317_0
(Timer 317) t317_10
t317_30
t317_60
t317_180
t317_600
t317_1200
t317_1800
Default: t317_180
tAckPCH
(Timer acknowledge pagingchannel)
yes (RW) Timer for transition fromCell_DCH state toURA_PCH state to allow forRLC ACK errors in thePHYSICAL CHANNELRECONFIGURATIONCOMPLETE message.
0 through 10000 stepsize=1
Default = 500
thdLCSCellInfoTimer
(Threshold location servicescell info timer)
yes (RW) Defines the maximum timethe Serving RNC (SRNC)will wait for the DestinationRNC (DRNC) to providecell information usinginformation exchangeinteraction.
1 through 240 stepsize=1
Default = 6
thdLcsEcidPositionTimer
(Threshold location servicesECID position timer)
no (RW) Defines the maximum timethe RNC will wait for theUE to provide the path lossand UE Rx-Tx timedifference type 1 or type 2measurement for the ECIDpositioning measurement.
1 through 60 stepsize=1
Default = 5
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-279
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
thdLcsUeGpsPositionTimer
(Threshold location servicesUE GPS position timer)
no (RW) Defines the maximum timethe RNC will wait for theUE to provide its owngeographical positionresulting from the UE-basedAssisted Global PositioningSystem (AGPS) positioningmethod applied in the UE.
1 through 60 stepsize=1
Default = 20
thdLocationSupervision-Timer
(Threshold locationsupervision timer)
yes (RW) Defines the maximum timethe RNC will wait for thecalculation of an appropriateUE position result beforeresponding to the CoreNetwork (CN) with anunsuccessful location result.
2 through 240 stepsize=1
Default = 30
tHORlSynch
(Timer handover radio linksynchronization)
yes (RW) Timer for radio links to gainsynchronization from a UEbefore being torn down.
0 through 100000 stepsize=1
Default = 5000
timingAdjustGranularity
(Timing adjust granularity)
no (RW) Used by the RNC to adjustdownlink framingtransmission timing onreception of theTimingAdjust Controlframe fromthe Node B.
0 through 5 step size=1
Default = 1
tOutOfServiceTimer
(Time out of service timer)
no (RW) This attribute specifies thetime given to UEs inCELL_FACH state, that arecamped to a blocked cell, toreselect another cell andinform the RNC via the cellupdate procedure.
0 through 65535 stepsize=1
Default = 2500
tPageRep
(Timer page repetitions)
no (RW) Duration between twoconsecutive pagetransmissions. Theretransmission shall be doneon the first paging occasionoccurring after this durationhas expired.
0.5 through 10.0 stepsize=0.1
Default = 3.5
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-280 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
tpageVal
(Timer paging validity)
yes (RW) The lifetime of a pagingmessage.
20 through 20000 stepsize=10
Default = 3000
tReconPCH
(Time-out reconfigurationpaging channel)
yes (RW) Time-out period forCell_DCH state toURA_PCH state PHYSICALCHANNELRECONFIGURATIONCOMPLETE message beforeretransmission occurs.
0 through 10000 stepsize=1
Default = 500
tRelocCoord
(Relocation coordinationtimer)
no (RW) This attribute sets the timean RNC will wait betweenRANAP Relocation Requestmessages before signallingthat a Relocation ResourceAllocation procedure hasfailed.
1 through 100 stepsize=1
Default = 10
tRelocOverAll
(Timer relocation overall)
yes (RW) This attribute specifies themaximum time for theprotection of the overallrelocation procedure in thesource RNC.
1 through 30 stepsize=1
Default = 10
tRelocPrep
(Timer relocationpreparation)
yes (RW) This attribute specifies themaximum time for therelocation preparationprocedure in the sourceRNC.
1 through 180 stepsize=1
Default = 10
tSynchTranChanComplete
(Timer synchronizedtransport channel complete)
yes (RW) Timer for synchronizedtransport channelreconfiguration (DCH toDCH) for the UE to send aTRANSPORT CHANNELRECONFIGURATIONCOMPLETE message backto the RNC.
0 through 10000 stepsize=1
Default = 5000
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-281
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
uECapabilityEnquiryMax
(RNC:UE_Capability_Enquiry_Max)
no (RW) This parameter defines themaximum number of timesthe UE Capability Enquirymessage is re-sent on expiryof uECapabilityEnquiry-Timer.
0 through 7 step size=1
Default = 3
uECapabilityEnquiryTimer
(RNC:UE_Capability_Enquiry_Timer)
no (RW) This timer determines howlong the RNC will wait fora Capability Informationmessage before sending arepeat UE CapabilityEnquiry message after aprevious enquiry was sent.
500 through 65535step size=1
Default = 1000
umts2GsmHOMeas
(UMTS to GSMmeasurement)
no (RW) Contains UMTS to GSMhandover measurementparameters.
See“Structure ofLRNC values”(p. 2-283).
Default = {-96,
cOEFF_3,
32}
umtsToGsmHandover
(UMTS to GSM handover)
yes (RW) The attribute enables ordisables the UMTS to GSMhandover feature per RNC.
true
false
Default = false
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-282 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
uTRANDRXCycleCoefficient
(UTRAN discontinuousreception cycle coefficient)
no (RW) The DiscontinuousReception (DRX) coefficientthat the UE should use whenit is monitoring the PagingIndication Channel (PICH)for paging messages sent bythe UTRAN.
3 through 9 step size=1
Default = 8
waitTime
(Wait time)
yes (RW) The time that the UE mustwait before retransmittingthe RRC CONNECTIONREQUEST message afterreceiving the RRCCONNECTION REJECTmessage.
0 through 15 stepsize=1
Default = 15
wpsEnableISDR
(Wireless priority serviceenabled)
no (RW) If enabled Wireless PriorityService (WPS) calls aredirected to GSM if theUMTS cell is congested.
true
false
Default = false
Structure of LRNC values
The following table describes the value format used for the LRNC object attribute.
Attribute Sequence of structure Values
freq frequencyBand bAND_I
bAND_II
bAND_III
bAND_IV
bAND_V
bAND_VI
bAND_VIII
bAND_IX
frequency 0 through 65535 step size=1
hSDPASrvCellChgCrit hysteresis 0.0 through 7.5 step size=0.5
timeToTrigger tIMETOTRIGGER_0
tIMETOTRIGGER_10
tIMETOTRIGGER_20
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-283
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
tIMETOTRIGGER_40
tIMETOTRIGGER_60
tIMETOTRIGGER_80
tIMETOTRIGGER_100
tIMETOTRIGGER_120
tIMETOTRIGGER_160
tIMETOTRIGGER_200
tIMETOTRIGGER_240
tIMETOTRIGGER_320
tIMETOTRIGGER_640
tIMETOTRIGGER_1280
tIMETOTRIGGER_2560
tIMETOTRIGGER_5000
hSDPASrvCellChgCrit useCIO true
false
intraFrequencyHHOvi-aIuDelay
time 0 through 20000 step size=100
offset 0.5 through 10.0 step size=0.5
latitude degrees 0 through 90 step size=1
minutes 0 through 59 step size=1
seconds 0 through 59 step size=1
latitude hemisphere northern
southern
longitude degrees 0 through 180 step size=1
minutes 0 through 59 step size=1
seconds 0 through 59 step size=1
longitude hemisphere western
eastern
qOSPriorityMapping-Table
aRP 1 through 3 step size=1
mACLogicalChannelPriority 5 through 8 step size=1
hsdpaSchedulingPriority 0 through 15 step size=1
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-284 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
edchSchedulingPriority 0 through 15 step size=1
qOSPriorityMapping-Table
trafficClassRank cONVERSATIONAL_RAB2
sTREAMING_RAB2
iNTERACTIVE1_RAB2
iNTERACTIVE2_RAB2
iNTERACTIVE3_RAB2
bACKGROUND_RAB2
aLL_RAB2
sIBRepProfile profileIndex 1 through 30 step size=1
schedulingBlock1REP 4 through 4096 step size=1
sIB1REP 4 through 4096 step size=1
sIB2REP 4 through 4096 step size=1
sIB3REP 4 through 4096 step size=1
sIB4REP 4 through 4096 step size=1
sIB5REP 4 through 4096 step size=1
sIB7REP 4 through 4096 step size=1
sIB11REP 4 through 4096 step size=1
sIB12REP 4 through 4096 step size=1
sIB18REP 4 through 4096 step size=1
sIBRepProfileUsage profileIndex 1 through 30 step size=1
refCellCount 0 through 5994 step size=1
umts2GsmHOMeas gsmQualityThreshold -115 through 0 step size=1
gsmFilterCoefficient cOEFF_0
cOEFF_1
cOEFF_2
cOEFF_3
cOEFF_4
cOEFF_5
cOEFF_6
cOEFF_7
cOEFF_8
RNC object descriptions LRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-285
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
cOEFF_9
cOEFF_11
cOEFF_13
cOEFF_15
cOEFF_17
cOEFF_19
combinedGsmNeighbourL-istSize
1 through 32 step size=1
RNC object descriptions LRNC
...................................................................................................................................................................................................................................
2-286 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
OCNS...................................................................................................................................................................................................................................
Full name
Orthogonal channel noise simulator
Description
This object represents the Orthogonal Channel Noise Simulator (OCNS).
The OCNS is a tool that simulates voice or data traffic on the forward link ordownlink from the Node B to the UE within a cell or cluster of cells. The OCNS runson the Node B, hence only OCNS setup data is sent over the Iub interface and not thenoise itself.
Hierarchical location
Hierarchical location of the OCNS object:
Object constraints and supported actions
You can create or modify this object.
The following list outlines the object constraints for creating an OCNS object.
• Only one OCNS object per LCell can be created with themodeOfOperationattribute set to “voice”.
• Make sure that all OCNS objects have different spreading factor values when themodeOfOperation attribute is set to “data”.
• If powerVariation is set to “ON” then ensure thataveragePowerPerUser + (10 *log10(numberOfUsers)) + 2 is less than the maximum allowed value fortotalPower which is 15.0.
• If powerVariation is set to “OFF” then ensure thataveragePowerPerUser + (10* log10(numberOfUsers)) is less than the maximum allowed value fortotalPowerwhich is 15.0.
• If powerVariation is set to “ON” then ensure thataveragePowerPerUser + (10 *log10(numberOfUsers)) + 2 is greater than the minimum allowed value fortotalPower which is -35.0.
OCNS
LRNC
LCell
LNodeB
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-287
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
• If powerVariation is set to “OFF” then ensure thataveragePowerPerUser + (10* log10(numberOfUsers)) is greater than the minimum allowed value fortotalPower which is -35.0.
• If powerVariation is set to “ON” then settotalPower to averagePowerPerUser+ (10 * log10(numberOfUsers)) + 2.
• If powerVariation is set to “OFF” then settotalPower to averagePowerPerUser+ (10 * log10(numberOfUsers)).
The following list outlines the object constraints for modifying an OCNS object usingthe set command.
• Make sure thatminBurstOnTime ≤ maxBurstOnTime.
• Make sure thatminBurstOffTime ≤ maxBurstOffTime.
• If powerVariation is set to “ON” then ensure thataveragePowerPerUser + (10 *log10(numberOfUsers)) + 2 is less than the maximum allowed value fortotalPower which is 15.0.
• If powerVariation is set to “OFF” then ensure thataveragePowerPerUser + (10* log10(numberOfUsers)) is less than the maximum allowed value fortotalPowerwhich is 15.0.
• If powerVariation is set to “ON” then ensure thataveragePowerPerUser + (10 *log10(numberOfUsers)) + 2 is greater than the minimum allowed value fortotalPower which is -35.0.
• If powerVariation is set to “OFF” then ensure thataveragePowerPerUser + (10* log10(numberOfUsers)) is greater than the minimum allowed value fortotalPower which is -35.0.
• If powerVariation is set to “ON” then settotalPower to averagePowerPerUser+ (10 * log10(numberOfUsers)) + 2.
• If powerVariation is set to “OFF” then settotalPower to averagePowerPerUser+ (10 * log10(numberOfUsers)).
Attributes
The following attributes apply to the OCNS object and are available through the GUIand CLI.
Attribute/Name Required Description Value
absScramblingCode
(Absolute Scrambling Code)
no (RO) This attribute is the absolutevalue of the downlinkscrambling code taken fromthe primary code group.
0 through 511 stepsize=1
Default = 0
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
RNC object descriptions OCNS
...................................................................................................................................................................................................................................
2-288 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
locked
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
averagePowerPerUser
(Average power per user)
yes (RW) The average power thatmust be transmitted per userwhen the OrthogonalChannel Noise Simulator(OCNS) service is activated.
-35.0 through 15.0 stepsize=0.1
Default = -20.0
channelisationCode
(Channelization code)
no (RO) The Channelization Code(SFx,y) that is used by theusers who are simulated inthe Orthogonal ChannelNoise Simulator (OCNS)service.
0 through 255 stepsize=1
Default = 0
maximumBurstOffTime
(Maximum burst off time)
yes (RW) The maximum time that isallowed between thetransmission of two databursts.
0 through 65535 stepsize=1
Default = 100
maximumBurstOnTime
(Maximum burst on time)
yes (RW) The maximum time that ispermitted for thetransmission of a burst.
0 through 65535 stepsize=1
Default = 512
RNC object descriptions OCNS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-289
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
maximumClusterSize
(Maximum cluster size)
yes (RW) The maximum number ofimages to download duringa web-browsing session.
1 through 256 stepsize=1
Default = 20
maximumThinkTime
(Maximum think time)
yes (RW) The maximum time that ispermitted between twoclusters of bursts.
0 through 65535 stepsize=1
Default = 3000
maxPowerVariation
( Maximum power variation)
no (RW) This parameter representsthe maximum powervariation of OrthogonalCode Noise Simulator(OCNS) power per userrelative to its average power(which is specified relativeto pilot power).
1.0 through 15.0 stepsize=0.1
Default = 2.0
minimumBurstOffTime
(Minimum burst off time)
yes (RW) The minimum time that ispermitted between thetransmission of two databursts.
0 through 65535 stepsize=1
Default = 32
minimumBurstOnTime
(Minimum burst on time)
yes (RW) The minimum time duringwhich a burst must betransmitted.
0 through 65535 stepsize=1
Default = 32
modeOfOperation yes (RO-SC) Defines whether avoice-channel or adata-channel simulationshould be performed for theOrthogonal Channel NoiseSimulator (OCNS) service.
vOICE
(Mode of operation) dATA
Default: dATA
numberOfUsers
(Number of users)
yes (RW) The number of users forwhich the simulation shouldbe performed.
1 through 1024 stepsize=1
Default = 10
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
RNC object descriptions OCNS
...................................................................................................................................................................................................................................
2-290 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
powerStepSize
(Power step size)
no (RW) This parameter representsthe step size an OrthogonalCode Noise Simulator(OCNS) can change itspower by (either up ordown) in 10ms intervals.
0.1 through 2.0 stepsize=0.1
Default = 0.3
powerVariation yes (RW) Indicates whether thetransmit power should bevaried for each radio frameor remain at a fixed level.
oFF
(Power variation) oN
Default: oFF
scramblingCode
(Scrambling code)
no (RO) The scrambling code indexused in the downlink for theOrthogonal Channel NoiseSimulator (OCNS) service.
0 through 15 stepsize=1
Default = 0
spreadingFactor yes (RO-SC) Defines the minimumspreading factor the UE mayuse for sending the RACHmessage.
sPREADINGFACT_8
(Spreading factor) sPREADINGFACT_16
sPREADINGFACT_32
sPREADINGFACT_64
sPREADINGFACT_128
sPREADINGFACT_256
Default:sPREADINGFACT_32
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
RNC object descriptions OCNS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-291
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
totalPower
(Total power)
no (RO) The total available powerfor the channels that aresimulated via theOrthogonal Channel NoiseSimulator (OCNS) service.
-35.0 through 15.0 stepsize=0.1
Default = -35.0
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions OCNS
...................................................................................................................................................................................................................................
2-292 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
OCNSHSDPA...................................................................................................................................................................................................................................
Full name
OCNSHSDPA
Description
This object contains data related to the configuration of the High Speed DownlinkPacket Access - Orthogonal Channel Noise Simulator (HSDPA-OCNS) resourceswithin the UTRAN
Hierarchical location
Hierarchical location of the OCNSHSDPA object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an LNodeB object:
• Set the OCNSHSDPA::oCNSChannelId attribute so that it is unique within itsparent HSDPA.
Attributes
The following attributes apply to the OCNSHSDPA object and are available throughthe GUI and CLI.
Attribute/Name Required Description Value
ackNackRatio
(Acknowledgements ratio)
no (RW-LO) This parameter indicates theratio of positive andnegative acknowledgementsbeing input to the NodeBscheduler.
0 through 100 stepsize=1
Default = 100
LNodeB
LRNC
HSDPA
L ellC
OCNSHSDPA
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-293
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: locked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
channelActivityTime
(Channel Activity Timer)
no (RW-LO) This is one of the inputparameters to invokeHSDPA-OCNS channel for aparticular UE.
10 through 1200 stepsize=10
Default = 20
cQIValue
(Channel quality indicator)
no (RW-LO) This parameter provides thedownlink channel qualityindicator to mimic UEfeedback to the NodeBscheduler.
0 through 30 stepsize=1
Default = 0
filtCoef
(Filter coefficient)
no (RW-LO) This is the value of filtercoefficient that will be usedin IIR filter (insidescheduler) in the CQIgenerating function.
0 through 10 stepsize=1
Default = 0
RNC object descriptions OCNSHSDPA
...................................................................................................................................................................................................................................
2-294 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
meanCQI
(Channel QualityInformation Mean value)
no (RW-LO) This is the mean of the CQIvalues when the CQIs aregenerated by the generatingfunction implemented in thescheduler.
1 through 30 stepsize=1
Default = 20
numMACDPDU
(MAC-d PDUs in queue)
no (RW-LO) This parameter indicatesnumber of MAC-d PDUs inthe priority queue per TTI.
0 through 45 stepsize=1
Default = 8
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
txDivMode no (RW-LO) This parameter indicates ifHSDPA-OCNS channelsshould be transmiited usingTx. Diveristy mode.
tXDNONE
Default: tXDNONE
uECapabilityNo
(UE category details)
no (RW-LO) This parameter provides UEcategory details to theNodeB scheduler indicatinglevel of support for HSDPAservice.
1 through 12 stepsize=1
Default = 6
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions OCNSHSDPA
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-295
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions OCNSHSDPA
...................................................................................................................................................................................................................................
2-296 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
PeriodCriteria...................................................................................................................................................................................................................................
Full name
Period criteria
Description
This object allows the control of intra-frequency measurement report messages that aresent by the User Equipment (UE).
Hierarchical location
Hierarchical location of the PeriodCriteria object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the PeriodCriteria object and are available throughthe GUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
LRNC
PeriodCriteria
IntraFreqMeas
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-297
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
pcamtOfRep yes (RW) The maximum number ofmeasurement reports that theUE is allowed to send inperiodical reporting mode.
pERIODICTRIGGREPORTAMOUNT_1
(Periodical criteria amountof reporting)
pERIODICTRIGGREPORTAMOUNT_2
pERIODICTRIGGREPORTAMOUNT_4
pERIODICTRIGGREPORTAMOUNT_8
pERIODICTRIGGREPORTAMOUNT_16
pERIODICTRIGGREPORTAMOUNT_32
pERIODICTRIGGREPORTAMOUNT_64
pERIODICTRIGGREPORTAMOUNT_INFINITY
No default
pcReportingInterval yes (RW) The reporting intervalbetween the measurementreports that are sent by theUE in periodical reportingmode.
pERIODICREPORTINT_0
RNC object descriptions PeriodCriteria
...................................................................................................................................................................................................................................
2-298 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(Periodical criteria reportinginterval)
pERIODICREPORTINT_250
pERIODICREPORTINT_500
pERIODICREPORTINT_1000
pERIODICREPORTINT_2000
pERIODICREPORTINT_3000
pERIODICREPORTINT_4000
pERIODICREPORTINT_6000
pERIODICREPORTINT_8000
pERIODICREPORTINT_12000
pERIODICREPORTINT_16000
pERIODICREPORTINT_20000
pERIODICREPORTINT_24000
pERIODICREPORTINT_28000
pERIODICREPORTINT_32000
pERIODICREPORTINT_64000
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
RNC object descriptions PeriodCriteria
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-299
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions PeriodCriteria
...................................................................................................................................................................................................................................
2-300 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
PG...................................................................................................................................................................................................................................
Full name
Protection group
Description
This object represents the Protection Group (PG) of an RNC.
Hierarchical location
Hierarchical location of the PG object:
Object constraints and supported actions
You can create or modify this object.
The following list outlines the constraints for modifying a PG object:
• Make sure that the GICCSTM1OC3Port object referenced by the attributeworkingSTM1OC3Port exists.
• Make sure that the GICCSTM1OC3Port object referenced by the attributeprotectionSTM1OC3Port exists.
• Make sure that eachworkingSTM1OC3Port andprotectionSTM1OC3Port attributereferences a unique GICCSTM1OC3Port object within the scope of an LRNC.
• The attributesworkingSTM1OC3Port andprotectionSTM1OC3Port can not beupdated as part of aset request.
Attributes
The following attributes apply to the PG object and are available through the GUI andCLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
LRNC
PG
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-301
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
protectionSTM1OC3Port
(Protection STM-1/OC-3port)
yes (RO-SC) The STM-1/OC-3 port thatis defined as the protectionline.
String of characters
No default
refIubList
(Reference Iub list)
no (RO) The Distinguished Names(DNs) of the Iub objectsthat relate to this protectiongroup.
Sequenceof 0 through999 records, using thefollowing value(s):
String of characters
No default
refIuCSList
(Reference Iu-CS list)
no (RO) The Distinguished Names(DNs) of the Iu-CS objectsthat relate to this protectiongroup.
Sequenceof 0 through1 records, using thefollowing value(s):
String of characters
No default
RNC object descriptions PG
...................................................................................................................................................................................................................................
2-302 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
refIuPSList
(Reference Iu-PS list)
no (RO) The Distinguished Names(DNs) of the Iu-PS objectsthat relate to this protectiongroup.
Sequenceof 0 through1 records, using thefollowing value(s):
String of characters
No default
refIuRList
(Reference Iur list)
no (RO) The Distinguished Names(DNs) of the Iur objects thatrelate to this protectiongroup.
Sequenceof 0 through10 records, using thefollowing value(s):
String of characters
No default
refSS7List
(Reference signaling systemno 7 list)
no (RO) The SS7 link objects thatreference this ProtectionGroup (PG).
Sequenceof 0 through46 records, using thefollowing value(s):
String of characters
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
workingSTM1OC3Port
(Working STM-1/OC-3 port)
yes (RO-SC) The STM-1/OC-3 port thatis defined as the workingline.
String of characters
No default
RNC object descriptions PG
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-303
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
PRACH...................................................................................................................................................................................................................................
Full name
Physical random access channel
Description
This object allows the management and control of the Physical Random AccessChannel (PRACH), the Random Access Channel (RACH), and the AcquisitionIndication Channel (AICH).
Hierarchical location
Hierarchical location of the PRACH object:
Object constraints and supported actions
You can create and delete this object.
The following list outlines the object constraints for creating a PRACH object.
• You must lock the LCell object before you create the PRACH object.
Attributes
The following attributes apply to the PRACH object and are available through the GUIand CLI.
Attribute/Name Required Description Value
acToAscList
(Access class to accessservice class list)
yes (RW) The UE uses this list to mapits Access Class (AC) value(0-15) to an Access ServiceClass (ASC) value.
Sequenceof 7 records,using the followingvalue(s):
0 through 7 step size=1
No default
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
PRACH
LRNC
LCell
LNodeB
RNC object descriptions
...................................................................................................................................................................................................................................
2-304 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(Administrative state) shuttingDown
locked
Default: unlocked
aICHPower
(Acquisition indicatorchannel power)
yes (RW) Defines the output powerlevel of the AcquisitionIndicator Channel (AICH)per Acquisition Indicator.
-22 through 5 stepsize=1
Default = -5
aICHStatusInfo
(Acquisition indicationchannel status information)
no (RO) Contains the operationalstate and availablity statusof the AICH physicalchannel in the cell.
See“Structure ofPRACH values”(p. 2-308).
Default = {enabled,
empty}
aICHTransmissionTiming yes (RW-PL) Indicates to the UE thetiming between twoconsecutive preambles.
aTT_0
(Acquisition indicatorchannel transmission timing)
aTT_1
Default: aTT_0
availability no (RO) Status information about theavailability of the cell.
inTest
(Availability) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
Default: empty
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
RNC object descriptions PRACH
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-305
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
constantVal
(Constant value)
yes (RW) Indicates the SIR target tobe achieved by the initialPhysical Random AccessChannel (PRACH)preamble. This value is usedto calculate the initialopen-loop transmit power ofthe PRACH preamble.
-35 through -10 stepsize=1
Default = -27
maxRetranPreamble
(Maximum retransmissionpreambles)
yes (RW) The maximum number ofRACH preambles that areallowed in one powerramping cycle.
1 through 64 stepsize=1
Default = 15
mMax
(M maximum)
yes (RW) Maximum number ofpreamble power rampingcycles.
1 through 32 stepsize=1
Default = 3
nB01max
(Nb01 maximum)
yes (RW) The maximum backoff timefor which the UE will notstart a subsequent preamblepower ramping cycle.
0 through 50 stepsize=1
Default = 40
nB01min
(Nb01 minimum)
yes (RW) The minimum backoff timefor which the UE will notstart a subsequent preamblepower ramping cycle.
0 through 50 stepsize=1
Default = 0
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
RNC object descriptions PRACH
...................................................................................................................................................................................................................................
2-306 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default: enabled
physicalRACHPreambleTh-reshold
(Physical RACH preamblethreshold)
yes (RW-PL) Threshold used by the NodeB as a minimum thresholdfor detecting RACHpreambles.
-36.0 through 0.0 stepsize=0.5
Default = -23.0
powerRampStep
(Power ramp step)
yes (RW) Indicates the power stepincrease for successivepreambles when noacquisition indicator isreceived from the Node B.
1 through 8 step size=1
Default = 2
pRACHPart
(Physical random accesschannel partitioning)
yes (RW) This attribute contains theAccess Service Class (ASC)settings that are used for thePhysical Random AccessChannel (PRACH)partitioning service.
Sequenceof 1 through8 records, using thefollowing value(s):
See“Structure ofPRACH values”(p. 2-308).
Default is an emptysequence.
pRACHStatusInfo
(Physical random accesschannel status information)
no (RO) Contains the operationalstate and availablity statusof the PRACH physicalchannel in the cell.
See“Structure ofPRACH values”(p. 2-308).
Default = {enabled,
empty}
preambleSignature
(Preamble signature)
no (RW) Indicates the availablepreamble signatures that canbe selected by the UE eachtime the UE sends aPhysical Random AccessChannel (PRACH)preamble.
0 through 65535 stepsize=1
Default = 65535
rACHStatusInfo
(Random access channelstatus information)
no (RO) Contains the operationalstate and availability statusof the RACH transportchannel in the cell.
See“Structure ofPRACH values”(p. 2-308).
Default = {enabled,
empty}
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
RNC object descriptions PRACH
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-307
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
coldStandby
providingService
Default: notSupported
subChannelNumbers
(Subchannel numbers)
no (RW) The available subchannelsthat are used to determinethe available access slots fortransmission of the PRACHpreamble.
0 through 4095 stepsize=1
Default = 4095
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of PRACH values
The following table describes the value format used for the PRACH object attribute.
Attribute Sequence of structure Values
aICHStatusInfo operationalState enabled
disabled
aICHStatusInfo availability inTest
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
RNC object descriptions PRACH
...................................................................................................................................................................................................................................
2-308 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
logFull
empty
pRACHPart availableSigStartIndex 0 through 15 step size=1
availableSigEndIndex 0 through 15 step size=1
assignedSubChannelNumber 0 through 15 step size=1
pRACHStatusInfo operationalState enabled
disabled
pRACHStatusInfo availability inTest
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
rACHStatusInfo operationalState enabled
disabled
rACHStatusInfo availability inTest
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
RNC object descriptions PRACH
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-309
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
PRNC...................................................................................................................................................................................................................................
Full name
Peer radio network controller
Description
This object represents an RNC which is connected to an Local Radio NetworkController (LRNC) via the Iur interface.
A PRNC object can be associated with at least one external cell object but the externalcell object does not need to be associated with the Peer Radio Network Controller(PRNC).
Hierarchical location
Hierarchical location of the PRNC object:
Object constraints and supported actions
You can create, delete, and modify this object.
Attributes
The following attributes apply to the PRNC object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
LRNC
PRNC
RNC object descriptions
...................................................................................................................................................................................................................................
2-310 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
itfNDN
(Itf-N distinguished name)
yes (RW) The Distinguished Name(DN) of the Itf-N object thatis related to this instance.
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
mCC
(Mobile country code)
yes (RW) Identifies the country towhich a PLMN belongs.
Sequenceof 3 records,using the followingvalue(s):
0 through 9 step size=1
No default
mNC
(Mobile network code)
yes (RW) Identifies a PLMN within acountry.
Sequenceof 2 through3 records, using thefollowing value(s):
0 through 9 step size=1
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
RNC object descriptions PRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-311
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
refFddExtCells
(PRNC managed cells list)
no (RO) List of cells managed by thePRNC.
Sequenceof 0 through2997 records, using thefollowing value(s):
String of characters
No default
refIur
(Reference Iur list)
no (RO) The Distinguished Names(DNs) of the Iur objects thatrelate to this peer RNC.
String of characters
No default
rNCId
(RNC identity)
yes (RW) The unique identifier of anRNC node within aUniversal Terrestrial RadioAccess Network (UTRAN)is the RNC Identifier(RNC-Id).
0 through 4095 stepsize=1
No default
sRNSRelocationForPSAl-lowed
(SRNS relocation for PSallowed)
no (RW) This parameter is used toallow or not allow thetriggering of SRNSRelocation for the PSDomain on the SRNC,depending on whether thePRNC can accept SRNSRelocation for the PSDomain.
true
false
Default = true
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions PRNC
...................................................................................................................................................................................................................................
2-312 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions PRNC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-313
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
PSU...................................................................................................................................................................................................................................
Full name
Power supply unit
Description
This object represents the Power Supply Unit (PSU) of the RNC.
Hierarchical location
Hierarchical location of the PSU object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the PSU object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 52
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 52
Default = N/A
PSU
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................
2-314 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 52
Default = N/A
dateOfManufacture
(Inventory unit build date)
no (RO) Date of Manufacture ofinventory unit.
0 through 52
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 52
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
yes (RO-SC) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions PSU
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-315
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
manufacturerData
(Manufacturer identity ofthe inventory unit)
no (RO) Manufacturer specific dataof the inventory unit.
0 through 52
Default = N/A
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 52
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 52
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 52
Default = N/A
shelfNumber
(Shelf number)
yes (RO-SC) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
No default
slotNumber
(Slot number)
yes (RO-SC) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unitNumber
(Unit number)
no (RO-SC) The number of the hardwareunit.
-32768 through 32767step size=1
Default = 0
RNC object descriptions PSU
...................................................................................................................................................................................................................................
2-316 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO-SC) Function Code, for example;UCU, UCR
0 through 52
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 52
Default = N/A
RNC object descriptions PSU
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-317
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
RA...................................................................................................................................................................................................................................
Full name
Routing area
Description
This object represents a cluster of one or more radio cells that together form a RoutingArea (RA).
The set of radio cells assigned to one RA must belong to the same Location Area(LA). The set of radio cells served by a Node B can be assigned to different RAs but asingle radio cell can be assigned to one area only. All Node Bs serving radio cellsassigned to the same LA are to be controlled by the same RNC.
Hierarchical location
Hierarchical location of the RA object:
Object constraints and supported actions
You can create and delete this object.
The following list outlines the object constraints for creating an RA object.
• You must make sure that the referenced LA object exists.
• You must make sure thatglobalPLMNValueTag is within the range specified bypLMNValueTagStart andpLMNValueTagEnd.
Attributes
The following attributes apply to the RA object and are available through the GUI andCLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
LRNC
RA
RNC object descriptions
...................................................................................................................................................................................................................................
2-318 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
globalPLMNValueTag
(Global public land mobilenetwork value tag)
no (RW) The value that is used bythe operator tore-synchronize theout-of-sync PLMN value tagfor a cell within a RoutingArea.
1 through 256 stepsize=1
Default = 1
networkMode
(Network mode)
no (RO-SC) This attribute is used toindicate if combinedLocation Area (LA) andRouting Area (RA) updatingis allowed per SGSN.
true
false
Default = true
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
pLMNValueTagEnd
(Public land mobile networkvalue tag end)
no (RW) The upper limit value of thePLMN value tag for all theSIB types having the areascope of PLMN.
1 through 256 stepsize=1
Default = 256
RNC object descriptions RA
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-319
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
pLMNValueTagStart
(Public land mobile networkvalue tag start)
no (RW) The starting value of thePLMN value tag for all theSIB types having the areascope of PLMN.
1 through 256 stepsize=1
Default = 1
rARefCells
(Routing area referencecells)
no (RO) The Distinguished Names(DNs) of the LCell objectsthat are related to thisRouting Area (RA).
Sequenceof 0 through5994 records, using thefollowing value(s):
String of characters
No default
rARefExtCells
(Routing area reference tothe external cells)
no (RO) The Distinguished Names(DNs) of the FddExtCellobjects that reference thisRouting Area (RA).
Sequenceof 0 through2997 records, using thefollowing value(s):
String of characters
No default
routingAreaCode
(Routing area code)
yes (RO-SC) The Routing Area Code(RAC) is used to identify aRouting Area within aLocation Area.
0 through 255 stepsize=1
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions RA
...................................................................................................................................................................................................................................
2-320 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
RFTrace...................................................................................................................................................................................................................................
Full name
Radio frequency trace
Description
This object represents a single Radio Frequency Trace (RF trace) job on a specificInternational Mobile Subscriber Identity (IMSI).
RF trace
The RF trace capability is a service which allows the operator to gather radio-relatedinformation associated with a predefined UE.
The information that is collected can be used by the network operator to:
• Check the network performance
• Localize faults
• Optimize the network.
The RF trace functionality within the RNC is performed by the collection of signalingmessages on the Uu, Iub and Iu interfaces.
Hierarchical location
Hierarchical location of the RFTrace object:
Object constraints and supported actions
You can create, delete, and modify this object.
Attributes
The following attributes apply to the RFTrace object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
LRNC
RFTrace
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-321
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
locked
Default: locked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
iMSI
(International mobilesubscriber identity)
yes(RW-LO)
The International MobileSubscriber Identity (IMSI)of the UE to be traced.
Any valid string.
The maximum lengthis 16 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
measurementType yes(RW-LO)
This is an input attribute toinvoke RF trace on aparticular UE and definesthe type of measurements tobe recorded in the RF tracefile.
all
(Measurement type) uE_only
nodeB_only
tPU_only
uEandNodeB
RNC object descriptions RFTrace
...................................................................................................................................................................................................................................
2-322 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
uEandTPU
tPUandNodeB
Default: all
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
traceDuration
(Trace duration)
yes(RW-LO)
This is one of the inputattributes to invoke an RFtrace on a particular UE anddefines the duration of thetrace in minutes. Theduration time starts from thetime the OMC-U user startsthe RF trace.
15 through 240 stepsize=15
Default = 30
traceEndTime
(Trace end time)
no (RO) This is a read-only attribute,which shows the operatorthe time at which theduration timer expires andtracing stops. It is calculatedby the RF trace managerand displayed on theOMC-U or LocalMaintenance Terminal(LMT).
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions RFTrace
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-323
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
traceFileName
(Trace file name)
no (RO) This attribute represents thefile name of the created RFtrace file.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
tracePeriod yes(RW-LO)
The period of time, inmilliseconds, between eachmeasurement.
pERIODICITY_1000
(Trace period) pERIODICITY_2000
pERIODICITY_3000
pERIODICITY_4000
pERIODICITY_6000
pERIODICITY_8000
pERIODICITY_12000
pERIODICITY_16000
pERIODICITY_20000
pERIODICITY_24000
pERIODICITY_28000
pERIODICITY_32000
Default:pERIODICITY_20000
traceStatus no (RO) This parameter provides thestatus of the RF tracingactivity. The valueTRACING_DEGRADEDindicates that somemeasurements are currentlyunavailable from the trace.
iDLE
(Trace status) tRACING
cOMPLETE
tRACING_DEGRADED
Default: iDLE
RNC object descriptions RFTrace
...................................................................................................................................................................................................................................
2-324 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions RFTrace
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-325
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SACS...................................................................................................................................................................................................................................
Full name
Service area circuit switch
Description
This object represents the Service Area Circuit Switch (SACS).
Hierarchical location
Hierarchical location of the SACS object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an SACS object.
• You must make sure that the referenced Location Area (LA) object exists.
Attributes
The following attributes apply to the SACS object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
LRNC
SACS
RNC object descriptions
...................................................................................................................................................................................................................................
2-326 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
sACSCode
(Service area circuit switchcode)
yes (RO-SC) The Service Area CircuitSwitch (SACS) code is partof the Service AreaIdentifier (SAI) andidentifies a service area forcircuit-switched serviceswithin a Location Area.
0 through 65535 stepsize=1
No default
sACSRefCells
(Service area circuit switchreference to cells)
no (RO) The Distinguished Names(DNs) of the cell objectsthat are related to thiscircuit-switched servicearea.
Sequenceof 0 through5994 records, using thefollowing value(s):
String of characters
No default
sACSRefExtCells
(Service area circuit switchreference to external cells)
no (RO) The Distinguished Names(DNs) of the external cellobjects that are related tothis circuit-switched servicearea.
Sequenceof 0 through2997 records, using thefollowing value(s):
String of characters
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
RNC object descriptions SACS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-327
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions SACS
...................................................................................................................................................................................................................................
2-328 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SAPS...................................................................................................................................................................................................................................
Full name
Service area packet switch
Description
This object represents the Service Area Packet Switch (SAPS).
Hierarchical location
Hierarchical location of the SAPS object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an SAPS object.
• You must make sure that the referenced Location Area (LA) object exists.
Attributes
The following attributes apply to the SAPS object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
LRNC
SAPS
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-329
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
sAPSCode
(Service area packet switchcode)
yes (RO-SC) The Service Area PacketSwitch (SAPS) code is partof the Service AreaIdentifier (SAI) andidentifies a service area forpacked-switched serviceswithin a Location Area.
0 through 65535 stepsize=1
No default
sAPSRefCells
(Service area packet switchreference to cells)
no (RO) The Distinguished Names(DNs) of the cell objectsthat are related to thispacket-switched servicearea.
Sequenceof 0 through5994 records, using thefollowing value(s):
String of characters
No default
sAPSRefExtCells
(Service area packet switchreference to external cells)
no (RO) The Distinguished Names(DNs) of the external cellobjects that are related tothis packet-switched servicearea.
Sequenceof 0 through2997 records, using thefollowing value(s):
String of characters
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
RNC object descriptions SAPS
...................................................................................................................................................................................................................................
2-330 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions SAPS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-331
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SB...................................................................................................................................................................................................................................
Full name
Solaris® blade
Description
This object represents aSolaris® Blade (SB) processor card.
The Solaris® Blade (SB) processor card provides a general UNIX processingenvironment for call processing and OA&M functions.
Hierarchical location
Hierarchical location of the SB object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the SB object and are available through the GUI andCLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: locked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 52
Default = N/A
SB
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................
2-332 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 52
Default = N/A
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
backoutSoftwareVersion
(Backout software version)
no (RO) The backout softwareversion.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 52
Default = N/A
RNC object descriptions SB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-333
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
currentSoftwareVersion
(Current software version)
no (RO) The version of the softwarethat is currently running onthe related component.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
dateOfManufacture
(Inventory unit build date)
no (RO) Date of Manufacture ofinventory unit.
0 through 52
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 52
Default = N/A
fallbackSoftwareVersion
(Fallback software version)
no (RO) The software version thatcan be used as fallback.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
hostName
(Host name)
no (RO) The Solaris Blade (SB) hostname.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions SB
...................................................................................................................................................................................................................................
2-334 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
manufacturerData
(Manufacturer identity ofthe inventory unit)
no (RO) Manufacturer specific dataof the inventory unit.
0 through 52
Default = N/A
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 52
Default = N/A
newDownloadedSoftwareVer-sion
(New downloaded softwareversion)
no (RO) The newly downloadedSolaris Blade (SB) softwareversion.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
newInstalledSoftwareVersion
(New installed softwareversion)
no (RO) The newly installed SolarisBlade (SB) software version.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
RNC object descriptions SB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-335
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 52
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 52
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
suState no (RO) The state of thesoftware-upgrade process.
sUINVALIDSTATE
(Software update state) dOWNLOADIN-PROGRESS
dOWNLOADCOM-PLETE
dOWNLOADFAILED
iNSTALL-INPROGRESS
iNSTALLCOMPLETE
iNSTALLFAILED
sWITCHOVERIN-PROGRESS
aCTIVATEIN-PROGRESS
aCTIVATECOMPLETE
aCTIVATEFAILED
RNC object descriptions SB
...................................................................................................................................................................................................................................
2-336 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
pARTIALLYACTI-VATED
fALLBACKIN-PROGRESS
fALLBACKCOM-PLETE
fALLBACKFAILED
pARTIALFALLBACK
aBORTED
lOCKINPROGRESS
lOCKCOMPLETE
lOCKFAILED
uNLOCKIN-PROGRESS
uNLOCKCOMPLETE
uNLOCKFAILED
cHECKINPROGRESS
cHECKCOMPLETE
cHECKFAILED
gRRESTART
cOMMITIN-PROGRESS
cOMMITFAILED
cOMMITCOMPLETE
bACKOUTIN-PROGRESS
bACKOUTFAILED
bACKOUTCOM-PLETE
pARTIALLY-BACKOUT
dOWNLOAD-ABORTED
iNSTALLABORTED
RNC object descriptions SB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-337
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
aCTIVATEABORTED
fALLBACKABORTED
bACKOUTABORTED
dELETEINPROGRESS
dELETECOMPLETE
dELETEFAILED
nOTUPGRADED
aCTCOMPTPUPAR-TIALACT
bACKCOMPTPUPAR-TIALBACK
fBACKCOMPTPU-PARTIALFBACK
aCTCOMPESCNO-TUPGRADED
bACKCOMPESCNO-TUPGRADED
fBACKCOMPESCNO-TUPGRADED
aCTCOMPACNOTUP-GRADED
bACKCOMPACNO-TUPGRADED
fBACKCOMPACNO-TUPGRADED
aPPLYINPROGRESS
aPPLYCOMPLETE
aPPLYFAILED
aPPLYABORTED
dEAPPLYIN-PROGRESS
dEAPPLYCOMPLETE
dEAPPLYFAILED
dEAPPLYABORTED
RNC object descriptions SB
...................................................................................................................................................................................................................................
2-338 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
uNEQP
aUTORECOVER-RESTART
fWUPDATEIN-PROGRESS
fWUPDATECOM-PLETE
fWUPDATEFAILED
fWUPDATEABORTED
Default:cHECKCOMPLETE
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
-32768 through 32767step size=1
Default = 0
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 52
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 52
Default = N/A
RNC object descriptions SB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-339
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SBBPEtherPort...................................................................................................................................................................................................................................
Full name
Solaris® blade backplane ethernet port
Description
This object represents an Ethernet port on aSolaris® Blade (SB) backplane.
The Solaris® Blade (SB) processor card provides a general UNIX processingenvironment for call processing and OA&M functions.
Hierarchical location
Hierarchical location of the SBBPEtherPort object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the SBBPEtherPort object and are available throughthe GUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
SB
SBBPEtherPort
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................
2-340 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions SBBPEtherPort
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-341
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions SBBPEtherPort
...................................................................................................................................................................................................................................
2-342 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SBClan...................................................................................................................................................................................................................................
Full name
Solaris® blade cluster LAN
Description
This object represents theSolaris® Blade (SB) cluster LAN.
The Solaris® Blade (SB) processor card provides a general UNIX processingenvironment for call processing and OA&M functions.
Hierarchical location
Hierarchical location of the SBClan object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the SBClan object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
SB
SBClan
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-343
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions SBClan
...................................................................................................................................................................................................................................
2-344 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions SBClan
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-345
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SBProc...................................................................................................................................................................................................................................
Full name
Solaris® blade processor
Description
This object represents the processor of aSolaris® Blade (SB) card.
The Solaris® Blade (SB) processor card provides a general UNIX processingenvironment for call processing and OA&M functions.
Hierarchical location
Hierarchical location of the SBProc object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the SBProc object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
SB
SBProc
LRNC
FBPShelf
Cabinet
RNC object descriptions
...................................................................................................................................................................................................................................
2-346 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions SBProc
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-347
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions SBProc
...................................................................................................................................................................................................................................
2-348 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SCCPCHFach...................................................................................................................................................................................................................................
Full name
Secondary common control physical channel forward access channel
Description
This object contains information on the downlink Forward Access Channels (FACHs)carried on the Secondary Common Control Physical Channel (SCCPCH).
Hierarchical location
Hierarchical location of the SCCPCHFach object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an SCCPCHFach object.
• LCell must be locked in order to create an SCCPCHFach.
The following list outlines the object constraints for deleting an SCCPCHFach object.
• LCell must be locked in order to delete an SCCPCHFach.
Attributes
The following attributes apply to the SCCPCHFach object and are available throughthe GUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
SCCPCHFach
LRNC
LCell
LNodeB
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-349
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availability no (RO) Status information about theavailability of the cell.
inTest
(Availability) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
Default: empty
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
fACHSigPower
(Forward Access Channelsignaling power)
yes (RW) This attribute defines theoutput power level of thesignaling Forward AccessChannel (FACH) transportchannel in dB with respectto primary CPICH Power.
-35.0 through 15.0 stepsize=0.1
Default = 4.0
RNC object descriptions SCCPCHFach
...................................................................................................................................................................................................................................
2-350 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
fACHSigStatusInfo
(FACH signaling statusinformation)
no (RO) Contains the operationalstate and availability statusof the signaling FACHtransport channel in the cell.
See“Structure ofSCCPCHFach values”(p. 2-353).
Default = {enabled,
empty}
fACHSigToAWE
(FACH signaling time ofarrival window endpoint)
no (RW) The Time of ArrivalWindow Endpoint (TOAWE)is the endpoint by which thesignaling Forward AccessChannel (FACH) dataframes are expected to bereceived by the Node B overthe Iub interface.
0 through 2559 stepsize=1
Default = 5
fACHSigToAWS
(FACH signaling time ofarrival window startpoint)
no (RW) The Time of ArrivalWindow Startpoint(TOAWS) is the startpointafter which thesignalingForward Access Channel(FACH) data frames areexpected to be received bythe Node B over the Iubinterface.
0 through 1279 stepsize=1
Default = 12
fACHTrafPower
(Forward Access Channeltraffic power)
yes (RW) This attribute defines theoutput power level of thetraffic Forward AccessChannel (FACH) transportchannel in dB with respectto primary CPICH Power..
-35.0 through 15.0 stepsize=0.1
Default = -2.0
fACHTrafStatusInfo
(FACH traffic statusinformation)
no (RO) Contains the operationalstate and availability statusof the traffic FACHtransport channel in the cell.
See“Structure ofSCCPCHFach values”(p. 2-353).
Default = {enabled,
empty}
RNC object descriptions SCCPCHFach
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-351
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
fACHTrafToAWE
(FACH traffic time ofarrival window endpoint)
no (RW) The Time of ArrivalWindow Endpoint (TOAWE)is the endpoint by which thetraffic Forward AccessChannel (FACH) dataframes are expected to bereceived by the Node B overthe Iub interface.
0 through 2559 stepsize=1
Default = 5
fACHTrafToAWS
(FACH traffic time ofarrival window startpoint)
no (RW) The Time of ArrivalWindow Startpoint(TOAWS) is the startpointafter which thetrafficForward Access Channel(FACH) data frames areexpected to be received bythe Node B over the Iubinterface.
0 through 1279 stepsize=1
Default = 12
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
sCCPCHStatusInfo
(Secondary common controlphysical channel statusinformation)
no (RO) The operational state andavailability status of theSecondary Common ControlPhysical Channel(S-CCPCH) in the cell.
See“Structure ofSCCPCHFach values”(p. 2-353).
Default = {enabled,
empty}
secondaryCCPCH
(Secondary common controlphysical channel)
yes (RW-PL) The definitions that areneeded for the SecondaryCommon Control PhysicalChannel (S-CCPCH).
See“Structure ofSCCPCHFach values”(p. 2-353).
Default = {50,
0.0,
0.0}
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
RNC object descriptions SCCPCHFach
...................................................................................................................................................................................................................................
2-352 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of SCCPCHFach values
The following table describes the value format used for the SCCPCHFach objectattribute.
Attribute Sequence of structure Values
fACHSigStatusInfo operationalState enabled
disabled
fACHSigStatusInfo availability inTest
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
fACHTrafStatusInfo operationalState enabled
disabled
fACHTrafStatusInfo availability inTest
RNC object descriptions SCCPCHFach
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-353
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
sCCPCHStatusInfo operationalState enabled
disabled
sCCPCHStatusInfo availability inTest
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
secondaryCCPCH channelOffset 0 through 149 step size=1
powerOffset1 0.0 through 6.0 step size=0.25
powerOffset2 0.0 through 6.0 step size=0.25
RNC object descriptions SCCPCHFach
...................................................................................................................................................................................................................................
2-354 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SCCPCHPch...................................................................................................................................................................................................................................
Full name
Secondary common control physical channel paging channel
Description
This object contains information on cell-wide Paging Channels (PCHs) carried on theSecondary Common Control Physical Channel (SCCPCH).
Hierarchical location
Hierarchical location of the SCCPCHPch object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an SCCPCHPch object.
• LCell must be locked in order to create an SCCPCHPch.
The following list outlines the object constraints for deleting an SCCPCHPch object.
• LCell must be locked in order to delete an SCCPCHPch.
Attributes
The following attributes apply to the SCCPCHPch object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
SCCPCHPch
LRNC
LCell
LNodeB
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-355
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availability no (RO) Status information about theavailability of the cell.
inTest
(Availability) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
Default: empty
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
RNC object descriptions SCCPCHPch
...................................................................................................................................................................................................................................
2-356 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
pCHPower
(Paging channel power)
yes (RW) The output power level ofthe Paging Channel (PCH).
-35.0 through 15.0 stepsize=0.1
Default = 4.0
pCHStatusInfo
(Paging channel statusinformation)
no (RO) The operational state andavailablity status of the PCHtransport channel in the cell.
See“Structure ofSCCPCHPch values”(p. 2-359).
Default = {enabled,
empty}
pCHToAWE
(Paging channel time ofarrival window endpoint)
no (RW) The Time of ArrivalWindow Endpoint (TOAWE)is the endpoint by which thePaging Channel (PCH) dataframes are expected to bereceived by the Node B overthe Iub interface.
0 through 2559 stepsize=1
Default = 5
pCHToAWS
(Paging channel time ofarrival window startpoint)
no (RW) The Time of ArrivalWindow Startpoint(TOAWS) is the start pointafter which the PagingChannel (PCH) data framesare expected to be receivedby the Node B over the Iubinterface.
0 through 1279 stepsize=1
Default = 12
pICHMode yes (RW-PL) The maximum number ofpaging indicators that aretransmitted in each PagingIndicator Channel (PICH)frame.
pM_18
(Paging indicator channelmode)
pM_36
pM_72
pM_144
Default: pM_36
pICHPower
(Paging indicator channelpower)
yes (RW) The output power level ofthe Paging IndicatorChannel (PICH) .
-10 through 5 stepsize=1
Default = -6
RNC object descriptions SCCPCHPch
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-357
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
pICHStatusInfo
(Page indication channelstatus information)
no (RO) The operational state andavailablity status of thePaging Indicator Channel(PICH) in the cell.
See“Structure ofSCCPCHPch values”(p. 2-359).
Default = {enabled,
empty}
sCCPCHStatusInfo
(Secondary common controlphysical channel statusinformation)
no (RO) The operational state andavailability status of theSecondary Common ControlPhysical Channel(S-CCPCH) in the cell.
See“Structure ofSCCPCHPch values”(p. 2-359).
Default = {enabled,
empty}
secondaryCCPCH
(Secondary common controlphysical channel)
yes (RW-PL) The definitions that areneeded for the SecondaryCommon Control PhysicalChannel (S-CCPCH).
See“Structure ofSCCPCHPch values”(p. 2-359).
Default = {50,
0.0,
0.0}
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions SCCPCHPch
...................................................................................................................................................................................................................................
2-358 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Structure of SCCPCHPch values
The following table describes the value format used for the SCCPCHPch objectattribute.
Attribute Sequence of structure Values
pCHStatusInfo operationalState enabled
disabled
pCHStatusInfo availability inTest
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
pICHStatusInfo operationalState enabled
disabled
pICHStatusInfo availability inTest
failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
sCCPCHStatusInfo operationalState enabled
disabled
sCCPCHStatusInfo availability inTest
failed
powerOff
RNC object descriptions SCCPCHPch
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-359
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
secondaryCCPCH channelOffset 0 through 149 step size=1
powerOffset1 0.0 through 6.0 step size=0.25
powerOffset2 0.0 through 6.0 step size=0.25
RNC object descriptions SCCPCHPch
...................................................................................................................................................................................................................................
2-360 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SMLC...................................................................................................................................................................................................................................
Full name
Serving mobile location center
Description
This object represents the Serving Mobile Location Center (SMLC).
The SMLC estimates the location of the UE and reports this information to the RNC.
Hierarchical location
Hierarchical location of the SMLC object:
Object constraints and supported actions
You can create, delete, and modify this object.
Attributes
The following attributes apply to the SMLC object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: locked
automaticSRSswitchbackEn-abled
(Automatic satellitereference serviceswitch-back enabled)
no (RW) This attribute allows theautomatic switch-backmechanism to the primarySatellite Reference Service(SRS) link to be enabled ordisabled.
true
false
Default = true
LRNC
SMLC
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-361
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
primaryGpsRefSrvIpRoute
(Primary GPS ReferenceServer IP route)
no (RW) IP route for connecting tothe primary GPS ReferenceServer.
See“Structure ofSMLC values”(p. 2-363).
Default = {0.0.0.0,
0.0.0.0,
0.0.0.0}
primarySrsAccessPoint
(Primary satellite referenceservice access point)
yes(RW-LO)
IP address and portinformation for the primarySatellite Reference Service(SRS) link.
See“Structure ofSMLC values”(p. 2-363).
Default = {0.0.0.0,
0,
0}
RNC object descriptions SMLC
...................................................................................................................................................................................................................................
2-362 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
secondaryGpsRefSrvIpRoute
(Secondary GPS ReferenceServer IP route)
no (RW) IP route for connecting tothe secondary GPSReference Server.
See“Structure ofSMLC values”(p. 2-363).
Default = {0.0.0.0,
0.0.0.0,
0.0.0.0}
secondarySrsAccessPoint
(Secondary satellitereference service accesspoint)
yes(RW-LO)
IP address and portinformation for thesecondary SatelliteReference Service (SRS)link.
See“Structure ofSMLC values”(p. 2-363).
Default = {0.0.0.0,
0,
0}
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of SMLC values
The following table describes the value format used for the SMLC object attribute.
RNC object descriptions SMLC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-363
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
primaryGpsRefS-rvIpRoute
srsIpAddress String of characters
srsIpNetMask String of characters
srsIpGateway String of characters
primarySrsAccessPoint srsIpAddress String of characters
port1 0 through 65535 step size=1
port2 0 through 65535 step size=1
secondaryGpsRefS-rvIpRoute
srsIpAddress String of characters
srsIpNetMask String of characters
srsIpGateway String of characters
secondarySrsAccess-Point
srsIpAddress String of characters
port1 0 through 65535 step size=1
port2 0 through 65535 step size=1
RNC object descriptions SMLC
...................................................................................................................................................................................................................................
2-364 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SpareMOC...................................................................................................................................................................................................................................
Full name
Spare managed object class
Description
This object represents a spare managed object class beneath the Local Radio NetworkController (LRNC) object.
Object constraints and supported actions
You can create or delete the SpareMOC object.
Attributes
The following attributes apply to the SpareMOC object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: locked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-365
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions SpareMOC
...................................................................................................................................................................................................................................
2-366 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SS7Link...................................................................................................................................................................................................................................
Full name
Signaling system no.7 link
Description
This object holds common information for the Signaling System no.7 (SS7) link.
A signaling link is used to carry the physical signaling information required for theSS7 protocol, which is carried over a single Asynchronous Transfer Mode (ATM)Virtual Channel Connection (VCC).
Hierarchical location
Hierarchical location of the SS7Link object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an SS7Link object.
• Make sure thatstackInstDN refers to a valid SS7StackInst object.
• Make sure that thess7VCL.protectionGroup attribute refers to a valid PG object.
• Make sure that thess7VCL.aTMQOS attribute refers to a valid ATMQOS object.
• Make sure that each ATMQOS referenced byss7VCL.aTMQOS is of type “vbrNrt”.
The following list outlines the object constraints for deleting an SS7Link object.
• If the SS7Link object is the last SS7Link object under its parent, ensure that theparent SS7LinkSetrefIuInterface has an empty sequence.
Attributes
The following attributes apply to the SS7Link object and are available through the GUIand CLI.
SS7Link
LRNC
SS7LinkSet
SS7Stack
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-367
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
linkNmb
(Link number)
no (RO) The link number to be usedto define the SS7 link.
0 through 79 stepsize=1
Default = 0
maxSLTtry
(Maximum signaling linktest retry)
yes (RO-SC) Maximum times to retry theSignaling Link Test Message(SLTM).
0 through 20 stepsize=1
Default = 10
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
RNC object descriptions SS7Link
...................................................................................................................................................................................................................................
2-368 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
ss7VCL
(Signaling system no. 7virtual channel link)
yes (RO-SC) A Virtual Channel Link(VCL) termination for asingle ATM AdaptationLayer type 5 (AAL5) VirtualChannel Connection (VCC)for carrying this SS7Message Transfer Part level3 (MTP3B) signaling link.
See“Structure ofSS7Link values”(p. 2-369).
Default is an emptysequence.
stackInstDN
(Stack instancedistinguished name)
yes (RO-SC) The Distinguished Name(DN) of the stack instancewhere VPI and VCI need tobe supported.
String of characters
No default
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
trace
(Trace)
no (RW) Indicates if trace is enabledor disabled.
true
false
Default = false
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of SS7Link values
The following table describes the value format used for the SS7Link object attribute.
RNC object descriptions SS7Link
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-369
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
ss7VCL vclTerminationRef 0 through 2147483647 step size=1
vPI 0 through 255 step size=1
vCI 32 through 63 step size=1
altIPAddress String of characters
port 0 through 3 step size=1
protectionGroup String of characters
aTMQOS String of characters
lnkTstSLC 0 through 15 step size=1
RNC object descriptions SS7Link
...................................................................................................................................................................................................................................
2-370 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SS7LinkSet...................................................................................................................................................................................................................................
Full name
Signaling system no.7 link set
Description
This object holds common information for the Signaling System no.7 (SS7) link set.
A link set is used for load sharing of SS7 link traffic and resilience (if one link fails alltraffic will change over to the other link). Failure of both links in a link set is a criticalservice outage.
One link set is used for each UMTS interface, making a total of 12 link sets (oneIu-cs, one Iu-ps, and 10 Iur link sets).
Hierarchical location
Hierarchical location of the SS7LinkSet object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an SS7LinkSet object.
• Make sure that theadjacentPointCode is not the same as any one of thefollowing point codes within an LRNC:
– The SS7StackoriginatingPointCode
– The IuCSrANAPDestinationPointCode
– The IuRrNSAPDestinationPointCode.
• If SS7LinkSetaESANetworkAddress is not equal to00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00, make surethat SS7LinkSetaESANetworkAddress is not same as any other SS7LinkSetaESANetworkAddress within an LRNC
• Make sure that thess7VCL.lnkTstSLC attribute is unique within an SS7LinkSet
• Make sure that at least one SS7StackInst object exists under this SS7LinkSet’sparent SS7Stack.
LRNC
SS7LinkSet
SS7Stack
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-371
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
The following list outlines the object constraints for modifying an SS7LinkSet object.
• Make sure that therefIuInterface attribute is empty before allowing updates tobrdcastFlg or tst.
The following list outlines the object constraints for deleting an SS7LinkSet object.
• Make sure that therefLink attribute is empty
• Make sure that therefIuInterface attribute is empty.
Attributes
The following attributes apply to the SS7LinkSet object and are available through theGUI and CLI.
Attribute/Name Required Description Value
adjacentPointCode
(Adjacent point code)
yes (RO-SC) The Signaling Systemnumber 7 (SS7) adjacentDestination Point Code(DPC).
0 through 254255255step size=1
No default
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
aESANetworkAddress
(ATM end system addressnetwork address)
yes (RO-SC) The ATM End SystemAddress (AESA) of thedestination node thatterminates the AAL2 path.
String of characters
No default
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
RNC object descriptions SS7LinkSet
...................................................................................................................................................................................................................................
2-372 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
logFull
empty
No default
brdcastFlg
(Broadcast flag)
yes (RW) Transfer Prohibited (TFP)broadcast flag.
true
false
Default = false
linkType yes (RO-SC) The type of link for whichthe profile is created.
iTU_92
(Link type) aNSI_92
iTU_96
aNSI_96
Default: iTU_96
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
refIuInterface
(Reference Iu interface)
no (RO) The Distinguished Names(DNs) of the IuCS, IuPS, orIuR objects that relate tothis SS7 linkset.
Sequenceof 0 through1 records, using thefollowing value(s):
String of characters
No default
refLink
(Reference link)
no (RO) The SS7 links whichreference this object.
Sequenceof 0 through2 records, using thefollowing value(s):
String of characters
No default
slsRange yes (RO-SC) The number of SignalingLink Selection (SLS) valuesfor this Link Set.
sLS16
(SLS values in Link Set) sLS32
sLS256
Default: sLS16
standbyStatus no (RO) The standby status of theresource.
notSupported
RNC object descriptions SS7LinkSet
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-373
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
tst
(Test)
yes (RW) The test pattern in theSignaling Link Test Message(SLTM).
0 through 100
Default = UMTS
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions SS7LinkSet
...................................................................................................................................................................................................................................
2-374 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SS7Stack...................................................................................................................................................................................................................................
Full name
Signaling system no.7 protocol stack
Description
This object holds common information for the Signaling System no.7 (SS7) broadbandprotocol stack. It provides configuration data for the core network signalling stack andstores its state.
Only one instance of this object exists to reflect the number of actual protocol stacksin the RNC Traffic Processing Unit (TPU). This includes data relating to SCCP, MTP,SSCF-NNI, and SSCOP protocol stack layers.
Hierarchical location
Hierarchical location of the SS7Stack object:
Object constraints and supported actions
You can create and delete this object.
The following list outlines the object constraints for creating an SS7Stack object.
• Make sure thatlinkNmb is unique within its SS7Stack.
• Make sure thatsscfnniFlcStartTmr ≤ sscfnniFlcStopTmr ≤ sscfnniMaxTx-Credit.
• Make sure thatsscopPollTmr ≤ sscopKeepAliveTmr < sscopNoResponseTmr.
• Valid values ofsscfnniN1 are 10, 100, .., 1000.
• Make sure that the SS7LinkSetadjacentPointCode is not the same as any otherSS7LinkSetadjacentPointCode within an Local Radio Network Controller(LRNC).
• Make sure that the SS7LinkSetaESANetworkAddress is not the same as the LRNCaESANetworkAddress.
• Make sure that the SS7LinkSetaESANetworkAddress is not the same as any IuBalcapVCLs.alcapTLA.
LRNC
SS7Stack
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-375
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
• Make sure that theoriginatingPointCode is not the same as any one of thefollowing point codes within an LRNC:
– The SS7LinkSetadjacentPointCode
– The IuCSrANAPDestinationPointCode
– The IuRrNSAPDestinationPointCode.
• Make sure thatsccpIarTmr > 2 × sccpIasTmr.
The following list outlines the object constraints for deleting an SS7Stack object.
• Make sure that therefLinkSet attribute is empty.
Attributes
The following attributes apply to the SS7Stack object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
alcapnniTiBlo
(ALCAP network nodeinterface timer block requestmessage)
yes (RW) Timer block request message(BLO) guard timer.
2 through 60 stepsize=1
Default = 2
alcapnniTiErq
(ALCAP network nodeinterface timer establishrequest message)
yes (RW) Timer establish requestmessage (ERQ) guard timer.
5 through 30 stepsize=1
Default = 5
alcapnniTiMod
(Modification request timer)
yes (RW) Modification request Timer.Started when an MODmessage is sent out, andstopped when thecorresponding MOA orMOR is returned/received.
5 through 30 stepsize=1
Default = 5
alcapnniTiRel
(ALCAP network nodeinterface timer releaserequest message)
yes (RW) Timer release requestmessage (REL) guard timer.
2 through 60 stepsize=1
Default = 2
RNC object descriptions SS7Stack
...................................................................................................................................................................................................................................
2-376 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
alcapnniTiRes
(ALCAP network nodeinterface timer reset requestmessage)
yes (RW) Timer reset request message(RES) guard timer.
2 through 60 stepsize=1
Default = 2
alcapnniTiUBL
(ALCAP network nodeinterface timer unblockrequest message)
yes (RW) Timer unblock requestmessage (UBL) guard timer.
2 through 60 stepsize=1
Default = 2
ansiOriginatingPointCode
(ANSI Originating PointCode)
yes(RW-RR)
24 bit ANSI OriginatingPoint Code.
1001001 through254255255 step size=1
No default
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
mtp3bAnsiSltT1Tmr
(Timer T1)
no (RW) Supervision timer forsignalling link testacknowledgement message.
4 through 12 stepsize=1
Default = 8
mtp3bAnsiSltT2Tmr
(Timer T2)
no (RW) Interval timer for sendingsignalling link testmessages.
30 through 90 stepsize=1
Default = 60
RNC object descriptions SS7Stack
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-377
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
mtp3bAnsiT18Tmr
(Timer T18)
no (RW) Timer to repeat TransferRestricted message, once byresponse method.
2 through 20 stepsize=1
Default = 11
mtp3bAnsiT19Tmr
(Timer T19)
no (RW) Timer to inform about thefailed link during linkrestoration procedure.
480 through 600 stepsize=1
Default = 540
mtp3bAnsiT20Tmr
(Timer T20)
no (RW) Timer to repeat local inhibittest.
90 through 120 stepsize=1
Default = 105
mtp3bAnsiT21Tmr
(Timer T21)
no (RW) Timer to repeat remoteinhibit test.
90 through 120 stepsize=1
Default = 105
mtp3bAnsiT23Tmr
(Timer T23)
no (RW) Timer at restarting nodewaiting to receive all TrafficRestart Allowed (TRA)messages.
1 through 30 stepsize=1
Default = 20
mtp3bAnsiT25Tmr
(Timer T25)
no (RW) Timer at restarting node andnode adjacent to restartingnode waiting for TrafficRestart Allowed (TRA)message.
30 through 35 stepsize=1
Default = 32
mtp3bAnsiT26Tmr
(Timer T26)
no (RW) Timer at restarting nodewaiting to repeat TrafficRestart Waiting (TRW)message.
12 through 15 stepsize=1
Default = 13
mtp3bAnsiT28Tmr
(Timer T28)
no (RW) Timer at node adjacent tothe restarting node waitingfor Traffic Restart Waiting(TRW) message.
3 through 35 stepsize=1
Default = 20
mtp3bAnsiT29Tmr
(Timer T29)
no (RW) Timer started when TrafficRestart Allowed (TRA) sentin response to unexpectedTRA or Traffic RestartWaiting (TRW).
60 through 65 stepsize=1
Default = 62
mtp3bAnsiT31Tmr
(Timer T31)
no (RW) False link congestiondetection timer.
10 through 120 stepsize=1
Default = 60
RNC object descriptions SS7Stack
...................................................................................................................................................................................................................................
2-378 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
mtp3bAnsiT33Tmr
(Timer T33)
no (RW) Probation timer for linkoscillation - Procedure B.
60 through 600 stepsize=1
Default = 300
mtp3bAnsiT34Tmr
(Timer T34)
no (RW) Suspension timer for linkoscillation - Procedure B.
5 through 120 stepsize=1
Default = 60
mtp3bMaxMSUSize
(Message transfer part level3 maximum message signalunit size)
yes (RO-SC) The maximum size of aMessage Signal Unit (MSU)beforesegmentation/reassembly isneeded.
50 through 4096 stepsize=1
Default = 4096
mtp3bSubServiceField
(Message transfer part level3 sub-service field)
yes (RW) The network indicatorcontained in the sub-servicefield.
0 through 3 step size=1
Default = 2
mtp3bT12Tmr
(Message transfer part level3 T12 timer)
yes (RW) Waiting for uninhibitacknowledgement timer.
800 through 1500 stepsize=100
Default = 1200
mtp3bT13Tmr
(Message transfer part level3 T13 timer)
yes (RW) Waiting for force uninhibittimer.
800 through 1500 stepsize=100
Default = 1200
mtp3bT14Tmr
(Message transfer part level3 T14 timer)
yes (RW) Waiting for inhibitionacknowledgement timer.
2000 through 3000step size=100
Default = 2500
mtp3bT1Tmr
(Message transfer part level3 T1 timer)
yes (RW) Delay to avoid messagemis-sequencing onchangeover.
500 through 1200 stepsize=100
Default = 800
mtp3bT22Tmr
(Message transfer part level3 T22 timer)
yes (RW) Local inhibit test timervalue.
3 through 6 step size=1
Default = 4
mtp3bT23Tmr
(Message transfer part level3 T23 timer)
yes (RW) Remote inhibit test timervalue.
3 through 6 step size=1
Default = 4
mtp3bT2Tmr
(Message transfer part level3 T2 timer)
yes (RW) Waiting for changeoveracknowledgement.
700 through 2000 stepsize=100
Default = 1400
RNC object descriptions SS7Stack
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-379
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
mtp3bT3Tmr
(Message transfer part level3 T3 timer)
yes (RW) Time-controlled diversiondelay to avoidmis-sequencing onchangeback.
500 through 1200 stepsize=100
Default = 800
mtp3bT4Tmr
(Message transfer part level3 T4 timer)
yes (RW) Waiting for changebackacknowledgement timer(first attempt).
500 through 1200 stepsize=100
Default = 800
mtp3bT5Tmr
(Message transfer part level3 T5 timer)
yes (RW) Waiting for changebackacknowledgement timer(second attempt).
500 through 1200 stepsize=100
Default = 800
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
originatingPointCode
(Originating point code)
yes(RW-RR)
The Signaling System no. 7(SS7) Originating PointCode (OPC) of the RNC.
0 through 16383 stepsize=1
Default = 1
refLinkSet
(Reference link set)
no (RO) The SS7 link sets whichreference this object.
Sequenceof 0 through23 records, using thefollowing value(s):
String of characters
No default
sccpAnsiConnEstTmr
(Connection timer)
no (RW) Defines the time to wait forConnection Confirm (CC) orConnection Refused (CREF)when setting up aconnection.
180 through 360 stepsize=1
Default = 270
sccpAnsiCoordTmr
(Coordinated state changetimer)
no (RW) Defines the time to wait forsubsystem out-of-service(SOG) message.
10 through 50 stepsize=1
Default = 30
sccpAnsiStatInfoTmr
(Subsystem status test timer)
no (RW) Defines the time betweensending SST messages tounavailable remotesubsystem.
10 through 50 stepsize=1
Default = 30
RNC object descriptions SS7Stack
...................................................................................................................................................................................................................................
2-380 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sccpConnEstTmr
(Signaling connectioncontrol part connectionestablishment timer)
yes (RW) The time to wait for aCONNECTION CONFIRMmessage.
60 through 120 stepsize=10
Default = 90
sccpCoordTmr
(Signaling connectioncontrol part co-ordinationchange timer)
yes (RW) The time to wait for a grantfor subsystem to go out ofservice.
60 through 120 stepsize=10
Default = 90
sccpGuardTmr
(Signaling connectioncontrol part guard timer)
yes (RW) The time to wait to resumethe normal procedure fortemporary connectionsections during the restartprocedure.
1380 through 1500step size=60
Default = 1440
sccpIarTmr
(Signaling connectioncontrol part inactivityreceive timer)
yes (RW) The time to wait to receivea message on a connectionsection.
660 through 1260 stepsize=60
Default = 660
sccpIasTmr
(Signaling connectioncontrol part inactivity sendtimer)
yes (RW) The delay to send a messageon a connection sectionwhen there are no messagesto send.
300 through 600 stepsize=30
Default = 300
sccpIgnoreTmr
(Signaling connectioncontrol part ignore timer)
yes (RW) The delay for a subsystembetween receiving a grant togo out of service andactually going out ofservice.
1 through 30 stepsize=1
Default = 30
sccpIntTmr
(Signaling connectioncontrol part integrationtimer)
no (RW) The time to wait for aRELEASE COMPLETEmessage or to releaseconnection resources, freezethe Local Reference Number(LRN) and alert amaintenance function afterthe initial sccpRelTmrexpiry.
0 through 60 stepsize=1
Default = 30
RNC object descriptions SS7Stack
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-381
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sccpReassemblyTmr
(Signaling connectioncontrol part reassemblytimer)
yes (RW) The time to wait to receiveall the segments of theremaining segments, singlesegmented message afterreceiving the first segment.
10 through 20 stepsize=1
Default = 15
sccpRelTmr
(Signaling connectioncontrol part release timer)
yes (RW) The time to wait for aRELEASE COMPLETEmessage.
10 through 20 stepsize=1
Default = 15
sccpRepRelTmr
(Signaling connectioncontrol part repeat releasetimer)
yes (RW) The time to wait for aRELEASE COMPLETEmessage or to repeatsending released messageafter the initialsccpRelTmrexpiry.
10 through 20 stepsize=1
Default = 15
sscfnniFlcStartTmr
(Service specificcoordination function at thenetwork node interface flowcontrol start timer)
no (RW) Minimum number of creditsbelow which flow controlwill be started.
0 through 900 stepsize=1
Default = 0
sscfnniFlcStopTmr
(Service specificcoordination function at thenetwork node interface flowcontrol stop timer)
no (RW) Minimum number of creditsbelow which flow controlwill be stopped.
0 through 950 stepsize=1
Default = 0
sscfnniMaxTxCredit
(Service specificcoordination function at thenetwork node interfacemaximum transmit credit)
yes (RW) Maximum number of datarequests that can be sentwithout getting a dataconfirm.
0 through 1000 stepsize=1
Default = 500
sscfnniN1
(Service specificcoordination function at thenetwork node interface N1)
yes (RW) The number of ProtocolData Units (PDUs) sentduring normal proving.
10 through 1000 stepsize=1
Default = 10
sscfnniT1Tmr
(Service specificcoordination function at thenetwork node interface T1timer)
yes (RW) The time between the linkrelease action and the nextlink re-establish actionduring the alignment.
2 through 10 stepsize=1
Default = 5
RNC object descriptions SS7Stack
...................................................................................................................................................................................................................................
2-382 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sscfnniT2Tmr
(Service specificcoordination function at thenetwork node interface T2timer)
yes (RW) Total time that the ServiceSpecific CoordinationFunction (SSCF) willattempt alignment.
15 through 60 stepsize=1
Default = 30
sscfnniT3Tmr
(Service specificcoordination function at thenetwork node interface T3timer)
yes (RW) Time between provingProtocol Data Units (PDUs).
100 through 200 stepsize=100
Default = 100
sscopCCTmr
(Service specific connectionoriented protocol connectioncontrol timer)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP)connection control timerdetermines the time betweentransmissions of BGN,END, RS and FR PDUs.
100 through 1000 stepsize=100
Default = 500
sscopIdleTmr
(Service specific connectionoriented protocol idle timer)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP) idle timeris started on receipt of astatus protocol data unit(STAT PDU).
100 through 200 stepsize=100
Default = 100
sscopKeepAliveTmr
(Service specific connectionoriented protocol keep alivetimer)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP) keepalive timer expires when apoll or status protocol dataunit (POLL or STAT PDU)is lost due to transmissionerrors.
100 through 200 stepsize=100
Default = 100
sscopMaxCC
(Service specific connectionoriented protocol maximumconnection control)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP) maximumconnection control attributedefines the maximum valuefor the state variableVT(CC), corresponding tothe maximum number oftransmissions of a BGN,END, ER, or RS PDU.
2 through 8 step size=1
Default = 4
RNC object descriptions SS7Stack
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-383
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sscopMaxPD
(Service specific connectionoriented protocol maximumpoll data)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP) maximumpoll data count attributedefines the maximum polldata count.
300 through 1000 stepsize=100
Default = 500
sscopMaxSTAT
(Service specific connectionoriented protocol maximumsolicited status)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP) maximumnumber of list elementsplaced in a Solicited StatusPDU (STAT PDU).
3 through 67 stepsize=2
Default = 67
sscopNoResponseTmr
(Service specific connectionoriented protocol noresponse timer)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP) noresponse timer determinesthe maximum time intervalduring which at least onestatus protocol data unit(STAT PDU) needs to bereceived.
500 through 3000 stepsize=100
Default = 2500
sscopPollTmr
(Service specific connectionoriented protocol poll timer)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP) poll timerdetermines the maximumtime interval between pollprotocol data units (POLLPDUs).
100 through 200 stepsize=100
Default = 100
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions SS7Stack
...................................................................................................................................................................................................................................
2-384 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions SS7Stack
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-385
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SS7StackInst...................................................................................................................................................................................................................................
Full name
Signaling system no.7 stack instance
Description
This object represents the implementation of a Signaling System no.7 (SS7) stackrunning in a specific cabinet, shelf, slot, or processor.
Hierarchical location
Hierarchical location of the SS7StackInst object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an SS7StackInst object.
• Make sure that theinstLoc attribute refers to a valid CICCProc object.
The following list outlines the object constraints for deleting an SS7StackInst object.
• If the SS7StackInst object is the last SS7StackInst object under its parent SS7Stack,make sure that therefLinkSet attribute is empty.
Attributes
The following attributes apply to the SS7StackInst object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
LRNC
SS7StackInst
SS7Stack
RNC object descriptions
...................................................................................................................................................................................................................................
2-386 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
giccIPAddress
(Gateway intelligent carriercard IP address)
no (RO) The network processormulticast IP address of theGateway Intelligent CarrierCard pair 1 (GICCPair 1).
String of characters
Default =239.192.100.111
instLoc
(Instance location)
yes (RO-SC) The Distinguished Name(DN) of the location wherethis SS7StackInst orUNIStack instance isrunning.
String of characters
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
RNC object descriptions SS7StackInst
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-387
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions SS7StackInst
...................................................................................................................................................................................................................................
2-388 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SuMgr...................................................................................................................................................................................................................................
Full name
Software update Mgr
Description
The Software Update class for the RNC software updates.
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the SuMgr object and are available through the GUIand CLI.
Attribute/Name Required Description Value
suCommitActionStatus no (RO) This attribute indicates thesoftware update commitaction progress result.
sUCOMMITUNDE-FINED
(Software update commitaction status)
sUCOMMITSUCCESS
sUCOMMITFAILED
sUCOMMITIN-PROGRESS
Default:sUCOMMITUNDE-FINED
suDeleteActionStatus no (RO) This attribute indicates thesoftware update deleteaction progress result.
sUDELETEUNDE-FINED
(Software update deleteaction status)
sUDELETESUCCESS
sUDELETEFAILED
sUDELETEIN-PROGRESS
Default:sUDELETEUNDE-FINED
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-389
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
suFWUpdateActionStatus no (RO) Indicates the SU FirmwareUpdate result
sUFWUPDATEUNDE-FINED
(Software update firmwareupdate result)
sUFWUPDATESUC-CESS
sUFWUPDATE-FAILED
sUFWUPDATEIN-PROGRESS
Default:sUFWUPDATEUNDE-FINED
suGetPkgInfoStatus no (RO) The attribute indicates the“suGetPkgInfo” actionprogress result.
sUGETPKGINFOUN-DEFINED
(Software update getpackage information status)
sUGETPKGINFOSUC-CESS
sUGETPKGINFO-FAILED
sUGETPKGINFOIN-PROGRESS
Default:sUGETPKGINFOUN-DEFINED
suGetVersionsStatus no (RO) The attribute indicates the“suGetVersions” actionprogress result.
sUGETVERSIONSUN-DEFINED
(Software update getversions status)
sUGETVERSIONSUC-CESS
sUGETVERSIONS-FAILED
sUGETVERSIONSIN-PROGRESS
Default:sUGETVERSIONSUN-DEFINED
RNC object descriptions SuMgr
...................................................................................................................................................................................................................................
2-390 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
suPrecheckActionResult no (RO) This attribute indicates thepre-check result before thesoftware update action iscarried out.
sUPRECHECKUNDE-FINEDRESULT
(Software update pre-checkaction result)
sUPRECHECKSUC-CESS
sUPRECHECKFAILED
sUPRECHECK-WARNING
sUPRECHECKREJEC-TION
sUPRECHECKIN-PROGRESS
sUPRECHECKFAIL-COMMITREQ
sUPRECHECKFAILF-WUPDATEREQ
Default:sUPRECHECKUNDE-FINEDRESULT
suPrecheckActionType no (RO) This attribute indicates theaction type before thesoftware update action iscarried out.
sUPRECHECKUNDE-FINEDACTION
(Software update pre-checkaction type)
sUPRECHECKDOWN-LOAD
sUPRECHECKIN-STALL
sUPRECHECKLOAD-INSTALL
sUPRECHECKACTI-VATE
sUPRECHECKACTI-VATEBACKOUT
sUPRECHECKFALL-BACK
RNC object descriptions SuMgr
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-391
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sUPRECHECK-BACKOUT
sUPRECHECKDE-LETE
sUPRECHECK-COMMIT
sUPRECHECKAPPLY
sUPRECHECKDE-APPLY
sUPRECHECKAPPLY-DEAPPLY
sUPRECHECKFWUP-DATE
Default:sUPRECHECKUNDE-FINEDACTION
suProgressIndicatorNumber
(Software update progressindicator number)
no (RO) This attribute indicates thesoftware update actionprocedure completion rate inpercentage.
0 through 100 stepsize=1
Default = 0
suProgressIndicatorString
(Software update progressindicator string)
no (RO) This attribute indicates thesoftware update actionprocedure completion status.
Any valid string.
The maximum lengthis 256 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions SuMgr
...................................................................................................................................................................................................................................
2-392 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
UNIStack...................................................................................................................................................................................................................................
Full name
User network interface stack
Description
This object provides configuration data for the access network signaling stack andstores its state.
The access network signaling stack contains the ALCAP and QSAAL signaling layers.
Hierarchical location
Hierarchical location of the UNIStack object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating a UNIStack object.
• Make sure thatsscopUniKeepAliveTmr × 1000 >sscopUniPollTmr.
• Make sure thatsscopUniNoResponseTmr > sscopUniKeepAliveTmr.
• Make sure thatinstLoc refers to a valid CICCProc object.
Attributes
The following attributes apply to the UNIStack object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
LRNC
UNIStack
RNC object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-393
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
alcapuniTiBlo
(ALCAP user networkinterface timer block requestmessage)
yes (RW) Timer block request message(BLO) guard timer.
2 through 60 stepsize=1
Default = 2
alcapuniTiErq
(ALCAP user networkinterface timer establishrequest message)
yes (RW) Timer establish requestmessage (ERQ) guard timer.
5 through 30 stepsize=1
Default = 5
alcapuniTiMod
(Modification request timer)
yes (RW) Modification request Timer.Started when an MODmessage is sent out, andstopped when thecorresponding MOA orMOR is returned/received.
5 through 30 stepsize=1
Default = 5
alcapuniTiRel
(ALCAP user networkinterface timer releaserequest message)
yes (RW) Timer release requestmessage (REL) guard timer.
2 through 60 stepsize=1
Default = 2
alcapuniTiRes
(ALCAP user networkinterface timer reset requestmessage)
yes (RW) Timer reset request message(RES) guard timer.
2 through 60 stepsize=1
Default = 2
alcapuniTiUBL
(ALCAP user networkinterface timer unblockrequest message)
yes (RW) Timer unblock requestmessage (UBL) guard timer.
2 through 60 stepsize=1
Default = 2
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
RNC object descriptions UNIStack
...................................................................................................................................................................................................................................
2-394 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
notInstalled
logFull
empty
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
sscopMaxCC
(Service specific connectionoriented protocol maximumconnection control)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP) maximumconnection control attributedefines the maximum valuefor the state variableVT(CC), corresponding tothe maximum number oftransmissions of a BGN,END, ER, or RS PDU.
2 through 8 step size=1
Default = 4
sscopUniCCTmr
(Service specific connectionoriented protocol usernetwork interface connectioncontrol timer)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP)connection control timerdetermines the time betweentransmissions of BGN,END, RS and FR PDUs.
500 through 2000 stepsize=100
Default = 1000
sscopUniIdleTmr
(Service specific connectionoriented protocol usernetwork interface idle timer)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP) idle timeris started on receipt of astatus protocol data unit(STAT PDU).
10 through 30 stepsize=1
Default = 15
sscopUniKeepAliveTmr
(Service specific connectionoriented protocol usernetwork interface keep alivetimer)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP) keepalive timer expires when apoll or status protocol dataunit (POLL or STAT PDU)is lost due to transmissionerrors.
1 through 4 step size=1
Default = 2
RNC object descriptions UNIStack
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-395
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
sscopUNIMaxPD
(Service specific connectionoriented protocol usernetwork interface maximumpoll data)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP) maximumpoll data count attributedefines the maximum polldata count.
10 through 25 stepsize=1
Default = 25
sscopUniNoResponseTmr
(Service specific connectionoriented protocol usernetwork interface noresponse timer)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP) noresponse timer determinesthe maximum time intervalduring which at least onestatus protocol data unit(STAT PDU) needs to bereceived.
3 through 10 stepsize=1
Default = 7
sscopUniPollTmr
(Service specific connectionoriented protocol usernetwork interface poll timer)
yes (RW) The Service SpecificConnection OrientedProtocol (SSCOP) poll timerdetermines the maximumtime interval between pollprotocol data units (POLLPDUs).
400 through 1100 stepsize=100
Default = 700
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions UNIStack
...................................................................................................................................................................................................................................
2-396 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions UNIStack
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-397
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
URA...................................................................................................................................................................................................................................
Full name
UTRAN registration area
Description
This object represents a cluster of one or more radio cells that together form a UTRANRegistration Area (URA).
Each radio cell served by a Node B can be assigned to one or more URAs. All NodeBs serving radio cells assigned to the same URA are to be controlled by the sameRNC.
Hierarchical location
Hierarchical location of the URA object:
Object constraints and supported actions
You cannot modify the URA object.
The following list outlines the object constraints for creating a URA object.
• For each element of the sequencelistOfPRNC, make sure that the referred PeerRadio Network Controller (PRNC) object exists and thatrefIur also refers to avalid IuR object.
Attributes
The following attributes apply to the URA object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
unlocked
(Administrative state) shuttingDown
locked
Default: unlocked
LRNC
URA
RNC object descriptions
...................................................................................................................................................................................................................................
2-398 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
empty
No default
emergencyCallRedirection-RequiredinURA
(Emergency call redirectionrequired in UTRANregistration area)
no (RO) This attribute indicateswhether any of the cellswithin the UTRANRegistration Area (URA) hasthe redirection solutionenabled.
true
false
Default = false
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: enabled
standbyStatus no (RO) The standby status of theresource.
notSupported
(Standby status) hotStandby
coldStandby
providingService
Default: notSupported
unknownStatus
(Unknown status)
no (RO) Unknown status of themanaged object.
true
false
Default = false
RNC object descriptions URA
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
2-399
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
uRAC
(UTRAN registration areacode)
yes (RO-SC) The UTRAN RegistrationArea Code (URAC).
0 through 65535 stepsize=1
No default
uRARefCells
(UTRAN registration areareference to cells)
no (RO) The list of the DistinguishedNames (DNs) of the LCellobjects that are related tothis UTRAN RegistrationArea (URA) object.
Sequenceof 0 through5994 records, using thefollowing value(s):
String of characters
No default
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
RNC object descriptions URA
...................................................................................................................................................................................................................................
2-400 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
3 3NodeB object descriptions
Overview...................................................................................................................................................................................................................................
Purpose
This chapter contains the descriptions of all the NodeB objects.
Contents
Node B information model 3-3
AlarmHub 3-5
ALDController 3-11
AmplifierShelf 3-15
AmpShelfFan 3-16
Cell 3-18
CPC 3-22
CPRIPort 3-26
CTU 3-30
DigitalShelf 3-35
DigitalShelfFan 3-38
E1T1Port 3-40
E3T3Port 3-43
EthernetPort 3-46
ExtRxAmp 3-48
Filter 3-52
FilterShelf 3-59
Frame 3-60
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-1
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
GRS 3-61
IMAGroup 3-65
IOU 3-68
IubInterface 3-74
NodeB 3-80
OCM 3-99
OM 3-103
PassthroughVCLTP 3-107
QoS 3-110
Radio 3-113
RETActuator 3-119
RFHead 3-123
RxAmp 3-132
STM1OC3Port 3-137
TDU 3-140
TxAmp 3-144
UCU 3-150
URC 3-154
NodeB object descriptions Overview
...................................................................................................................................................................................................................................
3-2 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Node B information model...................................................................................................................................................................................................................................
Overview
The Node B information model presents a network element management view of thelogical and physical resources for a particular Node B element within the UTRAN.
Node B object tree
The following diagram illustrates the object tree of the Node B information model.
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-3
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Network
NodeB
Rns
IMAGroup RETActuator ALDController GRSRFHead
Pre-configured
Containment
Association
=
=
=
a
b
a
DigitalShelf FilterShelf AmplifierShelf
Cell
Radio
UCU
URC
OM
DigitalShelfFan
CPC
CTU
or IOU
E1T1Port
AmpShelfFan
RxAmp
TDU TxAmpFilter
E3T3Port STM1OC3Port
OCM
CPRIPort
AlarmHub
EthernetPort
Frame ExtRxAmpIubInterfaceQos
NodeB object descriptions Node B information model
...................................................................................................................................................................................................................................
3-4 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
AlarmHub...................................................................................................................................................................................................................................
Full name
AlarmHub
Description
The AlarmHub object represents the Base Band Unit Alarm Hub. This is similar to,and mutually exclusive with, the IOU. The Alarm Hub supports external alarms. It isplugged directly into the backplane and hence the (inherited) slot number is notapplicable.
Hierarchical location
Hierarchical location of the AlarmHub object:
Object constraints and supported actions
You can create, delete, or modify this object.
Attributes
The following attributes apply to the AlarmHub object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
NodeB
IubInterface
DigitalShelf
OCM
AlarmHub
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-5
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
externalAlarms
(External alarms)
no (RW) The specific characteristicsof each external alarm thatis connected to thisinput/output unit.
Sequenceof 0 through40 records, using thefollowing value(s):
See“Structure ofAlarmHub values”(p. 3-8).
Default is an emptysequence.
NodeB object descriptions AlarmHub
...................................................................................................................................................................................................................................
3-6 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
NodeB object descriptions AlarmHub
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-7
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
Structure of AlarmHub values
The following table describes the value format used for the AlarmHub object attribute.
Attribute Sequence of structure Values
externalAlarms portNumber 0 through 39 step size=1
specificProblem 0 through 100
severity warning
minor
major
critical
indeterminate
cleared
probableCause airCompressorFailure
airConditioningFailure
airDryerFailure
batteryDischarging
batteryFailure
NodeB object descriptions AlarmHub
...................................................................................................................................................................................................................................
3-8 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
commercialPowerFailure
coolingFanFailure
enclosureDoorOpen
engineFailure
explosiveGas
excessiveVibration
fire
fireDetectorFailure
flood
fuseFailure
generatorFailure
heatingOrVentilationOrCool-ingSystemProblem
humidityUnacceptable
highHumidity
highTemperature
highWind
iceBuildUp
intrusionDetection
lowBatteryThreshold
lowCablePressure
lowFuel
lowHumidity
lowTemperature
lowWater
leakDetection
materialSupplyExhausted
pressureUnacceptable
pumpFailure
rectifierFailure
rectifierHighVoltage
rectifierLowFVoltage
NodeB object descriptions AlarmHub
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-9
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
smoke
toxicGas
ventilationSystemFailure
temperatureUnacceptable
toxicLeakDetected
coolingSystemFailure
externalEquipmentFailure
externalPointFailure
additionalText 0 through 100
externalAlarms activeState open
close
NodeB object descriptions AlarmHub
...................................................................................................................................................................................................................................
3-10 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ALDController...................................................................................................................................................................................................................................
Full name
AISG controller
Description
This class models the AISG controller.
Hierarchical location
Hierarchical location of the ALDController object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the ALDController object and are available throughthe GUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
NodeB
ALDController
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-11
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
NodeB object descriptions ALDController
...................................................................................................................................................................................................................................
3-12 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
unknownDevices
(Unknown devices)
no (RO) This attribute lists theUnique ID of devicesdetected on the AISG buswhich are not configured inthe NodeB backplaneEEPROM and are thereforeunexpected.
Sequenceof 0 through32 records, using thefollowing value(s):
Any valid string.
The maximum lengthis 32 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions ALDController
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-13
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
NodeB object descriptions ALDController
...................................................................................................................................................................................................................................
3-14 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
AmplifierShelf...................................................................................................................................................................................................................................
Full name
Amplifier shelf
Description
This object represents the amplifier shelf that contains the power amplifier equipment.
The amplifier shelf provides the power amplifiers for:
• The Node B
• The power distribution panel for the amplifiers
• The fan tray to cool the amplifiers.
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the AmplifierShelf object and are available throughthe GUI and CLI.
Attribute/Name Required Description Value
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 2
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-15
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
AmpShelfFan...................................................................................................................................................................................................................................
Full name
Amplifier shelf fan
Description
This object represents the amplifier shelf fan of the Node B and resides on theamplifier shelf.
The fan tray contains the fans that generate the cooling airflow for the amplifier shelf.The fan tray has an indicator LED and a power/alarms connector on the front panel.The fan tray vents to the rear.
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the AmpShelfFan object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
NodeB object descriptions
...................................................................................................................................................................................................................................
3-16 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
logFull
Default: offLine
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions AmpShelfFan
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-17
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Cell...................................................................................................................................................................................................................................
Full name
Cell
Description
This object represents a logical entity that contains resource and control informationused to support call processing on one sector and one carrier. The resources compriseequipment like radio and antenna and logical resources like channel groups. Thecontrol information comprises capabilities like maximum power and transmit diversity.
Object constraints and supported actions
You can create, delete, or modify this object.
The following list outlines the object constraints for creating a Cell object.
• The associated Radio object (indicated bysupportingRadio) must already exist
• There must be no other existing Cell objects with an association to the samesupportingRadio
• There must be no other existing Cell objects within the parent NodeB with thesame value for attributelocalCellId.
Attributes
The following attributes apply to the Cell object and are available through the GUI andCLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
associatedRFPath
(Cell frequency band)
yes (RO-SC) This attribute stores anidentification of the sectorand the frequency band thatthe Cell MOI supports
See“Structure of Cellvalues” (p. 3-21).
Default is an emptysequence.
NodeB object descriptions
...................................................................................................................................................................................................................................
3-18 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
cellRadius
(Cell radius)
yes (RW) The cell radius is definedunder the Node B which isused for the RACH searchwindow size for eachsector/cell.
500 through 50000step size=1
Default = 20000
dASEquipmentPresent
(Distributed Antenna Systemcell)
no (RW) This parameter indicates ifthis Cell is in a DistributedAntenna System (DAS)setup.
true
false
Default = false
desiredElectricalTilt
(Desired electrical tilt)
yes (RW) This attribute defines thedesired electrical tilt foreach actuator supporting thisCell. All actuators in a Celluse the same tilt value. Thisattribute is only valid ifCell::supportingRETActua-tors is not empty. The valueis given in degrees.
-90.0 through 90.0 stepsize=0.1
Default = 0
hSDSCHSchedulingMode no (RW) This attribute determines theNodeB internal callprocessing HSDSCH_service_Attribute_set to be used forscheduling.
cRMax
NodeB object descriptions Cell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-19
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(HSDSCH SchedulingMode)
unconstrained
fairThroughput
Default: cRMax
itfNDN
(Itf-N distinguished name)
yes (RW) The Distinguished Name(DN) of the Itf-N object thatis related to this instance.
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
localCellId
(Local cell identity)
yes (RO-SC) The local cell identity is theunique identifier for a set ofphysical resources within aNode B able to support acell.
0 through 268435455step size=1
No default
maxDlPowCapability
(Maximum downlink powercapability)
no (RO) The maximum downlinkpower capability for a cell.
0.0 through 50.0
Default = 0.0
ndpLabel
(Network data provisioningcell label)
no (RW) Label used to identify thecell in the NDP planningtools.
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
rPGAdjustment
(Receive Path GainAdjustment)
no (RW) This defines a delta value tobe added to the fixed RPGvalue.
-3.0 through 3.0 stepsize=0.1
Default = 0.0
NodeB object descriptions Cell
...................................................................................................................................................................................................................................
3-20 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
supportingRETActuators
(Supporting remoteelectrical tilt actuators)
no (RO) This attribute lists theassociated RETActuators. Itis autopopulated by Node BOA&M based oninformation written to theNode B backplaneEEPROM.
Sequenceof 0 through4 records, using thefollowing value(s):
String of characters
No default
supportingRFEquipment
(RF equipment DN)
no (RO) This attribute stores a DN ofthe associated RFequipment.
String of characters
No default
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of Cell values
The following table describes the value format used for the Cell object attribute.
Attribute Sequence of structure Values
associatedRFPath sectorID 1 through 3 step size=1
associatedRFPath frequencyBand bAND_V
bAND_IX
bAND_II
bAND_I
bAND_VIII
bAND_IV
bAND_X
NodeB object descriptions Cell
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-21
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
CPC...................................................................................................................................................................................................................................
Full name
Common power converter
Description
This object represents the Common Power Converter (CPC) component in the Node B.
The CPCs convert the input voltage into the various voltages required by the units inthe digital shelf.
Object constraints and supported actions
You can create, delete, or modify this object.
The following list outlines the object constraints for creating a CPC object.
• If nodeBType is “indoorHybrid” or “compact”, the Relative Distinguished Name(RDN) of the CPC must be in the range 1 to 4.
• The value of attributeshelfNumber shall be derived from the parent shelf(DigitalShelf shelfNumber).
The following list outlines the object constraints for deleting a CPC object.
• If this is the last CPC object, ensure that no Universal Radio Controller (URC)exists.
Attributes
The following attributes apply to the CPC object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
NodeB object descriptions
...................................................................................................................................................................................................................................
3-22 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
NodeB object descriptions CPC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-23
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
NodeB object descriptions CPC
...................................................................................................................................................................................................................................
3-24 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
NodeB object descriptions CPC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-25
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
CPRIPort...................................................................................................................................................................................................................................
Full name
CPRIPort
Description
The CPRIPort object represents the CPRI port transceiver hardware, which can beplugged into the OCM card. It provides the Layer 1 functionality to connect to the RFHeads via a fibre link.
Hierarchical location
Hierarchical location of the CPRIPort object:
Object constraints and supported actions
You can create, delete, or modify this object.
Attributes
The following attributes apply to the CPRIPort object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
NodeB
IubInterface
DigitalShelf
CPRIPort
NodeB object descriptions
...................................................................................................................................................................................................................................
3-26 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
connectedRFHeads
(Connected RFHeads)
no (RO) This read only attributestores a list of up to 3 DNsof the (daisy chained)RFHead MOIs that areconnected to this CPRIPort.
Sequenceof 0 through3 records, using thefollowing value(s):
String of characters
No default
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
NodeB object descriptions CPRIPort
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-27
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
NodeB object descriptions CPRIPort
...................................................................................................................................................................................................................................
3-28 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
unsupportedRFHeads
(Unsupported RF Heads)
no (RO) This read only attributestores a sequence of 0 - 6RF Heads which cannot besupported by the OAMapplication.
Sequenceof 0 through6 records, using thefollowing value(s):
See“Structure ofCPRIPort values”(p. 3-29).
Default is an emptysequence.
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
Structure of CPRIPort values
The following table describes the value format used for the CPRIPort object attribute.
Attribute Sequence of structure Values
unsupportedRFHeads sectorID 0 through 65535 step size=1
perSectorID 0 through 65535 step size=1
macAddress 0 through 17
NodeB object descriptions CPRIPort
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-29
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
CTU...................................................................................................................................................................................................................................
Full name
Common timing unit
Description
This object represents the Common Timing Unit (CTU) component and resides on theNode B digital shelf.
The Common Timing Unit (CTU) distributes the appropriate frequency signals to thechannel units and the radio cards.
Object constraints and supported actions
You can create, delete, or modify this object.
The following list outlines the object constraints for creating a CTU object.
• A supporting URC object must exist.
• The value of attributeshelfNumber shall be derived from its parent shelf(DigitalShelf shelfNumber).
The following list outlines the object constraints for deleting a CTU object.
• If this is the last CTU, ensure that no UCU, Radio, or TDU objects exist.
Attributes
The following attributes apply to the CTU object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: locked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
NodeB object descriptions
...................................................................................................................................................................................................................................
3-30 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
detectedCTUHardwareModel no (RO) The CTU hardware modelthat is physically present inthe NodeB.
unknownCTUHard-wareModel
(Detected CTU model) cTU
cTU_GPS
cTUII_GPS_OMQ
cTUII_GPS
cTUII_OCXO
cTUII
cTUII_OMA
cTUII_OMQ
Default:unknownCTUHard-wareModel
NodeB object descriptions CTU
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-31
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
expectedCTUHardware-Model
yes(RW-LO)
The CTU hardware modelthe operator expects to beinstalled.
unknownCTUHard-wareModel
(Expected CTU model) cTU
cTU_GPS
cTUII_GPS_OMQ
cTUII_GPS
cTUII_OCXO
cTUII
cTUII_OMA
cTUII_OMQ
Default:unknownCTUHard-wareModel
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
NodeB object descriptions CTU
...................................................................................................................................................................................................................................
3-32 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
oMMezzanineComcode
(OM Mezzanine Comcode)
no (RO) Shows the comcodeinventory information forthe OM Mezzanine cardwhich may be additionallyequipped on a CTU-II.
Any valid string.
The maximum lengthis 50 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
oMMezzanineSerialNumber
(OM Mezzanine SerialNumber)
no (RO) Shows the Serial Numberinventory information forthe OM Mezzanine cardwhich may be additionallyequipped on a CTU-II.
Any valid string.
The maximum lengthis 50 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
NodeB object descriptions CTU
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-33
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
NodeB object descriptions CTU
...................................................................................................................................................................................................................................
3-34 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
DigitalShelf...................................................................................................................................................................................................................................
Full name
Digital shelf
Description
This object represents the digital shelf within a Node B.
The digital shelf processes the data received on the Iub interface, and converts it intoUMTS RF signals. In the reverse direction the digital shelf decodes the UMTS RFsignals, and extracts the data streams that are sent back over the Iub interface.
In addition, the digital shelf provides the other cabinet interfaces, to connect theRemote Maintenance Terminal (RMT) or the external alarms.
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the DigitalShelf object and are available through theGUI and CLI.
Attribute/Name Required Description Value
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-35
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions DigitalShelf
...................................................................................................................................................................................................................................
3-36 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
NodeB object descriptions DigitalShelf
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-37
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
DigitalShelfFan...................................................................................................................................................................................................................................
Full name
Digital shelf fan
Description
This object represents a fan that resides on the digital shelf within a Node B.
The fan tray contains the fans that generate the cooling air flow for the shelf. The fantray has an indicator LED and a power/alarms connector on the front panel.
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the DigitalShelfFan object and are available throughthe GUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
NodeB object descriptions
...................................................................................................................................................................................................................................
3-38 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default: offLine
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions DigitalShelfFan
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-39
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
E1T1Port...................................................................................................................................................................................................................................
Full name
E1/T1 port
Description
This object represents the physical E1/T1 port component of the Universal RadioController (URC).
Up to four E1/T1 ports may be created for a URC. Either E1 digital trunks (EuropeanStandard for a transmission rate of 2.048 Mbit/s) or T1 digital trunks (AmericanStandard for a transmission rate of 1.544 Mbit/s) may be connected to E1/T1 ports.
Object constraints and supported actions
You can create, delete, or modify this object.
The following list outlines the object constraints for deleting a E1T1Port object.
• All references to the E1T1Port object in the VCL attributes of the IubInterfaceobject must be removed before deleting the E1T1Port object.
Attributes
The following attributes apply to the E1T1Port object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
NodeB object descriptions
...................................................................................................................................................................................................................................
3-40 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
dependency
degraded
notInstalled
logFull
Default: offLine
iMAGroupReference
(IMA group referencedescription)
no (RO) This is an ASCIIrepresentation of theautodetected IMA ID of theIMA group this link belongsto.
0 through 3
Default = -
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
trunkGroupMember
(Trunk group member)
no (RO) The different attributes thatare assigned to this trunkgroup member.
See“Structure ofE1T1Port values”(p. 3-41).
Default = {unknown,
00000000000000000000000000000
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of E1T1Port values
The following table describes the value format used for the E1T1Port object attribute.
Attribute Sequence of structure Values
trunkGroupMember bearerType unknown
e1
t1
NodeB object descriptions E1T1Port
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-41
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
j1
timeslots 0 through 32
NodeB object descriptions E1T1Port
...................................................................................................................................................................................................................................
3-42 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
E3T3Port...................................................................................................................................................................................................................................
Full name
E3T3Port
Description
This object models an E3T3 port terminated on the TIM card on a URC-II. It providesan E3 or T3 backhaul interface. There can be E3 or T3 ports per URC-II.
Hierarchical location
Hierarchical location of the E3T3Port object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an LNodeB object:
• There must be no instances of E1T1Port, IMAGroup or STM1OC3Port objects
• The URC object must exist, and the URC::expectedURCHardwareModel must beuRCII-E3T3
• If the attribute expectedURCHardwareMmodel of the parent URC object does notequal″uRCII-E3T3″ an E3T3Port MOI must not be created under this parent URC
• No references to this E3T3Port object must exist in VCL data in attributes ofIuBInterface objects.
Attributes
The following attributes apply to the E3T3Port object and are available through theGUI and CLI.
NodeB
IubInterface
DigitalShelf
URC
E3T3Port
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-43
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
interfaceType no (RO) This read only parameterindicates whether the E3T3port is connected to an E3network or a T3 network
e3
(Interface Type) t3
undefined
Default: e3
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
NodeB object descriptions E3T3Port
...................................................................................................................................................................................................................................
3-44 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions E3T3Port
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-45
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
EthernetPort...................................................................................................................................................................................................................................
Full name
EthernetPort
Description
This object represents the physical Ethernet Port on the Line Interface Unit (LIU) ofthe Universal Radio Controller (URC).
Hierarchical location
Hierarchical location of the EthernetPort object:
Object constraints and supported actions
Not Available Yet
Attributes
The following attributes apply to the EthernetPort object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: locked
NodeB
IubInterface
DigitalShelf
URC
EthernetPort
NodeB object descriptions
...................................................................................................................................................................................................................................
3-46 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
speed no (RO) This read only attributestores the transmissioncapability speed of theethernet port.
mbps10
(Ethernet port speed) mbps100
Default: mbps10
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions EthernetPort
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-47
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ExtRxAmp...................................................................................................................................................................................................................................
Full name
External receiving amplifier
Description
This object represents the Tower Top Low Noise Amplifier (TTLNA) physicalresource.
It is located at the top of an antenna tower and acts as an amplifier for received radiosignals.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an ExtRxAmp object.
• The associated RxAmp object, specified in attributeassociatedRxAmp, must exist.
• The value of the RDN of the ExtRxAmp must be identical to the value of the RDNof the associated Filter. The associated Filter is the parent of the associated RxAmp(the associated RxAmp is defined inassociatedRxAmp).
• The value of the ExtRxAmpslotNumber attribute must be set to the value of theslotNumber attribute of its associated RxAmp (the associated RxAmp is defined inassociatedRxAmp).
Attributes
The following attributes apply to the ExtRxAmp object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: locked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
NodeB object descriptions
...................................................................................................................................................................................................................................
3-48 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
associatedRxAmp
(Associated receivingamplifier)
yes (RO-SC) The Distinguished Name(DN) of the RxAmp objectthat is associated with thisexternal receiving amplifier.
String of characters
No default
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions ExtRxAmp
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-49
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 3
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
NodeB object descriptions ExtRxAmp
...................................................................................................................................................................................................................................
3-50 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
NodeB object descriptions ExtRxAmp
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-51
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Filter...................................................................................................................................................................................................................................
Full name
Filter
Description
This object represents a filter component on the filter shelf of the Node B.
The Filter object contains duplexers with integrated Low Noise Amplifiers (LNAs).
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating a Filter object.
• A supporting Universal Radio Controller (URC) object must exist.
• The value of attributeshelfNumber shall be derived from the parent shelf(FilterShelfshelfNumber).
• The value of attributeslotNumber shall be set to the value of the RelativeDistinguished Name (RDN) of the created Filter.
The following list outlines the object constraints for deleting a Filter object.
• Ensure that no RxAmp child object exists.
Attributes
The following attributes apply to the Filter object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
NodeB object descriptions
...................................................................................................................................................................................................................................
3-52 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
detectedFilterHardware-Model
no (RO) The hardware model that isphysically present in theNodeB.
unknownFilterHard-wareModel
(Detected filter model) uFPI60
uFPI10A
uFPI10B
uFPI10C
uFPI10D
uFPI10E
uFPI10F
uFPP5D
uFPP15A
uFPP10A13
uFPP10B13
NodeB object descriptions Filter
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-53
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
uFPP10DE
uFPP10EC3
cFPC25
cFPP60
dFPCN11A
dFPCN11B
dFPCN14B
dFPCI11A
dFPCI11B
dFPCI9A
dFPCI6B
dFPC16AB
dFPP20AD
dFPP20BE
dFPP20FC
dFPP20CG
dFPP10C5
dFPP10A1
dFPP10B4
dFPP5C3
dFPI10A
dFPI10B
dFPI10C
dFPI10D
dFPI10E
dFPI10F
tFPPA1A3
tFPPB1B3
qFPPDE
qFPPC3E
dFPP60
dFPCN25
NodeB object descriptions Filter
...................................................................................................................................................................................................................................
3-54 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
tFP1800
dFPDJ35U
dFPI60LowGain
dFPI60HiGain
dFPG35
newFilterHardware-Model
dFPI15A
dFPA45
dFPA60
Default:unknownFilterHard-wareModel
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
expectedFilterHardware-Model
yes (RW) The hardware model theoperator expects to beinstalled.
unknownFilterHard-wareModel
(Expected filter model) uFPI60
uFPI10A
uFPI10B
uFPI10C
uFPI10D
uFPI10E
uFPI10F
uFPP5D
uFPP15A
uFPP10A13
uFPP10B13
uFPP10DE
uFPP10EC3
cFPC25
cFPP60
NodeB object descriptions Filter
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-55
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
dFPCN11A
dFPCN11B
dFPCN14B
dFPCI11A
dFPCI11B
dFPCI9A
dFPCI6B
dFPC16AB
dFPP20AD
dFPP20BE
dFPP20FC
dFPP20CG
dFPP10C5
dFPP10A1
dFPP10B4
dFPP5C3
dFPI10A
dFPI10B
dFPI10C
dFPI10D
dFPI10E
dFPI10F
tFPPA1A3
tFPPB1B3
qFPPDE
qFPPC3E
dFPP60
dFPCN25
tFP1800
dFPDJ35U
dFPI60LowGain
dFPI60HiGain
NodeB object descriptions Filter
...................................................................................................................................................................................................................................
3-56 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
dFPG35
newFilterHardware-Model
dFPI15A
dFPA45
dFPA60
Default:unknownFilterHard-wareModel
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
NodeB object descriptions Filter
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-57
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 3
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
NodeB object descriptions Filter
...................................................................................................................................................................................................................................
3-58 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
FilterShelf...................................................................................................................................................................................................................................
Full name
Filter shelf
Description
This object represents the filter shelf within a Node B.
The filter shelf provides the connection of the Node B to the antenna cabling as wellas closed loop gain control, antenna test and digital predistortion. Most filter shelveswill be equipped with dual duplexers.
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the FilterShelf object and are available through theGUI and CLI.
Attribute/Name Required Description Value
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 3
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-59
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Frame...................................................................................................................................................................................................................................
Full name
Frame
Description
This object represents a physical object containing three shelves that hold the Node Bhardware components:
• Amplifier shelf
• Digital shelf
• Filter shelf.
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the Frame object and are available through the GUIand CLI.
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions
...................................................................................................................................................................................................................................
3-60 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
GRS...................................................................................................................................................................................................................................
Full name
GPS reference server
Description
This class models the capability of a NodeB to act as a GPS reference server.
Hierarchical location
Hierarchical location of the GRS object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an GRS object.
• If degrees of GRS::gPSantennaLongitude is set to 180, minutes and seconds mustbe 0
• If degrees of GRS::gPSantennaLatitude is set to 90, minutes and seconds must be0.
Attributes
The following attributes apply to the GRS object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: locked
GRS
NodeB
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-61
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
firstPortNumber
(First Port Number)
yes(RW-LO)
First TCP/IP port numberused for SMLC-GRScommunication
1024 through 65535step size=1
Default = 5004
gPSantennaAltitude
(Global Positioning Systemantenna altitude)
no (RO) Altitude of the GPS antenna See“Structure of GRSvalues” (p. 3-63).
Default is an emptysequence.
gPSantennaLatitude
(Global Positioning Systemantenna latitude)
no (RO) Latitude of the GPSantenna.
See“Structure of GRSvalues” (p. 3-63).
Default is an emptysequence.
gPSantennaLongitude
(Global Positioning Systemantenna longitude)
no (RO) Longitude of the GPSantenna
See“Structure of GRSvalues” (p. 3-63).
Default is an emptysequence.
gPSrefStationID
(Global Positioning SystemReference Station identity)
yes(RW-LO)
Numerical identifier of theGPS Reference Station.
0 through 255 stepsize=1
No default
operationalState no (RO) The operational state of themanaged object.
enabled
NodeB object descriptions GRS
...................................................................................................................................................................................................................................
3-62 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(Operational state) disabled
Default: disabled
secondPortNumber
(Second port number)
yes(RW-LO)
Second TCP/IP port numberused for SMLC-GRScommunication.
1024 through 65535step size=1
Default = 5002
selfSurveyProgressIndicator
(Self survey progressindicator)
no (RO) Indicates the estimatedprogress of the Self Survey.
0 through 100 stepsize=1
Default = 0
supportingCTU
(Supporting CTU)
no (RO) Indicates the DN of theCTU-II autonomouslyselected by the NodeB tosupport the GRS.
String of characters
No default
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of GRS values
The following table describes the value format used for the GRS object attribute.
Attribute Sequence of structure Values
gPSantennaAltitude direction depth
height
altitude 0.0 through 10000.0 step size=0.1
gPSantennaLatitude degrees 0 through 90 step size=1
minutes 0 through 59 step size=1
seconds 0.00 through 59.99 step size=0.01
gPSantennaLatitude hemisphere northern
southern
gPSantennaLongitude degrees 0 through 180 step size=1
NodeB object descriptions GRS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-63
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
minutes 0 through 59 step size=1
seconds 0.00 through 59.99 step size=0.01
gPSantennaLongitude hemisphere western
eastern
NodeB object descriptions GRS
...................................................................................................................................................................................................................................
3-64 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IMAGroup...................................................................................................................................................................................................................................
Full name
Inverse multiplexing of ATM group
Description
This class models a group of links at one end used to establish an IMA virtual link tothe other end.
Hierarchical location
Hierarchical location of the IMAGroup object:
Object constraints and supported actions
You can create, delete, or modify this object.
The following list outlines the object constraints for creating an IMAGroup object.
• The associatedE1T1Port object listed in theiMAE1T1Links attribute must exist.
• The associatedE1T1Port object listed in theiMAE1/T1Links attribute must not bereferenced in any other iMAGroup or in VCL data in attributes ofIubInterfaceobjects.
• No references must exist to thisiMAGroup in VCL data in attributes ofIubInterface objects.
Attributes
The following attributes apply to the IMAGroup object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
NodeB
IMAGroup
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-65
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
iMAE1T1Links
(IMA group local E1/T1links)
yes (RW) Set of E1T1Portdistinguished names thatcorrespond to E1/T1 linksthat are members of thisIMA group.
Sequenceof 1 through8 records, using thefollowing value(s):
String of characters
No default
iMAE1T1LinksFarEnd
(IMA group remote E1/T1links)
no (RO) Set of E1/T1 linksautodetected as members ofthis IMA group.
Sequenceof 0 through8 records, using thefollowing value(s):
String of characters
No default
iMAFrameLength
(IMA frame length)
no (RO) This attribute represents theauto-detected frame length,in the receive direction, ofthe auto-detected InverseMultiplexing for ATM(IMA) group
32 through 256 stepsize=1
Default = 128
NodeB object descriptions IMAGroup
...................................................................................................................................................................................................................................
3-66 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
iMAGroupIdent
(IMA group identity)
yes (RO-SC) IMAGroupIdent is used bythe NodeB to associateauto-detected IMA groups(identified via the IMA IDs)to the created IMAGroupMOs (identified via theiMAGroupIdent) in theMIB.
0 through 255 stepsize=1
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions IMAGroup
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-67
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IOU...................................................................................................................................................................................................................................
Full name
Input/output unit
Description
This object represents the Input/Output Unit (IOU) component on the digital shelfobject.
The Input/Output Unit (IOU) is an assembly that provides the external interface forsignals (E1/T1 links and external alarms) entering and exiting the Node B digital shelf.
The IOU is similar to, and mutually exclusive with, the Alarm Hub.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an IOU object.
• A supporting Universal Radio Controller (URC) object must exist.
• All values for theexternalAlarms attribute must have differentportNumbersettings.
• The value of attributeshelfNumber shall be derived from the parent shelf(DigitalShelf shelfNumber).
Attributes
The following attributes apply to the IOU object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
NodeB object descriptions
...................................................................................................................................................................................................................................
3-68 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
externalAlarms
(External alarms)
no (RW) The specific characteristicsof each external alarm thatis connected to thisinput/output unit.
Sequenceof 0 through40 records, using thefollowing value(s):
See“Structure of IOUvalues” (p. 3-71).
Default is an emptysequence.
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
NodeB object descriptions IOU
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-69
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
NodeB object descriptions IOU
...................................................................................................................................................................................................................................
3-70 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
Structure of IOU values
The following table describes the value format used for the IOU object attribute.
Attribute Sequence of structure Values
externalAlarms portNumber 0 through 39 step size=1
specificProblem 0 through 100
severity warning
minor
major
critical
indeterminate
cleared
probableCause airCompressorFailure
airConditioningFailure
airDryerFailure
batteryDischarging
batteryFailure
NodeB object descriptions IOU
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-71
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
commercialPowerFailure
coolingFanFailure
enclosureDoorOpen
engineFailure
explosiveGas
excessiveVibration
fire
fireDetectorFailure
flood
fuseFailure
generatorFailure
heatingOrVentilationOrCool-ingSystemProblem
humidityUnacceptable
highHumidity
highTemperature
highWind
iceBuildUp
intrusionDetection
lowBatteryThreshold
lowCablePressure
lowFuel
lowHumidity
lowTemperature
lowWater
leakDetection
materialSupplyExhausted
pressureUnacceptable
pumpFailure
rectifierFailure
rectifierHighVoltage
rectifierLowFVoltage
NodeB object descriptions IOU
...................................................................................................................................................................................................................................
3-72 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
smoke
toxicGas
ventilationSystemFailure
temperatureUnacceptable
toxicLeakDetected
coolingSystemFailure
externalEquipmentFailure
externalPointFailure
additionalText 0 through 100
externalAlarms activeState open
close
NodeB object descriptions IOU
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-73
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IubInterface...................................................................................................................................................................................................................................
Full name
Interface to Node B
Description
This object represents a logical object and provides the service of exchanginginformation between the Node B and RNC network elements on the basis of 3GPPstandardized channels.
These channels are ATM-based and support:
• The Node B Control Port
• The Communication Control Ports
• The Access Link Control Ports
• The Traffic Termination Ports.
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“IubInterface” (p. A-6)in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an IubInterface object.
• The associated E1T1Port object referenced in Virtual Channel Link (VCL)structures must already exist:
– nbcpNbapVCLs.e1T1PortDn
– ccpNbapVCLs.e1T1PortDn
– alcapVCLs.e1T1PortDn
– userplaneBVCLs.e1T1PortDn.
• The elementsnbcpNbapVCLs.e1T1PortDn, ccpNbapVCLs.e1T1PortDn, andalcapVCLs.e1T1PortDn must reference to E1T1Port objects on the UniversalRadio Controller (URC) with Relative Distinguished Name (RDN) = 1, which isthe primary URC.
• There must be no other instances of IubInterface objects under the same NodeBobject instance.
• There must be exactly only one entry in IubInterfacealcapVCLs.
NodeB object descriptions
...................................................................................................................................................................................................................................
3-74 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
• There must be exactly only one entry in IubInterfaceccpNbapVCLs.
• There must be exactly only one entry in IubInterfacenbcpNbapVCLs.
• There must be at least one entry in IubInterfaceuserplaneVCLs.
• There may be no more than twelve entries in IubInterfaceuserplaneVCLs perURC.
• The e1T1PortDn part of each VCL structure must refer to an existing E1T1Portinstance.
• The associated Quality of Service (QoS) object referenced in VCL structures mustalready exist:
– nbcpNbapVCLs.qosDn
– ccpNbapVCLs.qosDn
– alcapVCLs.qosDn
– userplaneBVCLs.qosDn.
• The ccpId part of each entry in IubInterfaceccpNbapVCLs must be unique acrossthe set of allccpId values in this object.
• The aal2PathId part of each entry in IubInterfaceuserplaneVCLs must be uniqueacross the set of allaal2PathId values in this object.
• The tla part of each entry in IubInterfacealcapVCLs must be unique across theset of alltla values in this object.
• The tla part of IubInterfacealcapVCLs has to consist of 20 dot-separated pairs ofASCII-hexadecimal digits, for example:2D.00.04.99.11.52.63.46.6F.00.00.00.00.00.00.00.00.00.00.00.
• The value of the attribute QoSaalType of all QoS instances referenced inIubInterfacealcapVCLs, ccpNbapVCLs, andnbcpNbapVCLs must be equal to aal5.
• The value of the attribute QoSaalType of all QoS instances referenced inIubInterfaceuserplaneBVCLs must be equal to aal2.
The following list outlines the object constraints for modifying an IubInterface objectusing theset command.
• Parent object NodeB must be locked to set:
– nbcpNbapVCLs
– ccpNbapVCLs
– alcapVCLs
– userplaneBVCLs.
Attributes
The following attributes apply to the IubInterface object and are available through theGUI and CLI.
NodeB object descriptions IubInterface
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-75
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
alcapVCLs
(Access link controlapplication protocol virtualchannel links)
yes (RO-SC) The attributes that arerelated to the VirtualChannel Links (VCLs) forVirtual Channel Connections(VCCs) that carry AccessLink Control ApplicationProtocol (ALCAP)signaling.
Sequenceof 1 through2 records, using thefollowing value(s):
See“Structure ofIubInterface values”(p. 3-78).
Default is an emptysequence.
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
NodeB object descriptions IubInterface
...................................................................................................................................................................................................................................
3-76 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
ccpNbapVCLs
(Communication controlport NBAP virtual channellinks)
yes (RO-SC) The attributes that arerelated to the VirtualChannel Links (VCLs) forVirtual Channel Connections(VCCs) that carrycommunication control portNBAP messages for anytraffic-termination point thatis associated with this NodeB.
Sequenceof 1 through2 records, using thefollowing value(s):
See“Structure ofIubInterface values”(p. 3-78).
Default is an emptysequence.
linkNumber
(Link number)
yes (RW) This is the link number tobe used when calling theATM algorithm forallocation of VirtualChannel Identifier(VCI)/Virtual Path Identifier(VPI) values.
0 through 9999 stepsize=1
No default
linkProfileDn
(Link Profile DN)
yes (RW) Represents the DN label ofthe LinkProfile used toprovision this link.
String of characters
No default
nbcpNbapVCLs
(Node B control port NBAPvirtual channel links)
yes (RO-SC) The attributes that arerelated to the VirtualChannel Link (VCL) thatcarries the Node B controlport Node B ApplicationPart (NBAP) messages.
Sequenceof 1 through2 records, using thefollowing value(s):
See“Structure ofIubInterface values”(p. 3-78).
Default is an emptysequence.
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
NodeB object descriptions IubInterface
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-77
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
userplaneBVCLs
(Userplane B virtual channellinks)
yes (RO-SC) The attributes that arerelated to theVirtual ChannelLinks (VCLs) for AAL2based Virtual ChannelConnections (VCCs) thatcarry userplane B traffic.
Sequenceof 1 through24 records, using thefollowing value(s):
See“Structure ofIubInterface values”(p. 3-78).
Default is an emptysequence.
Structure of IubInterface values
The following table describes the value format used for the IubInterface objectattribute.
Attribute Sequence of structure Values
alcapVCLs vpi 0 through 255 step size=1
vci 32 through 65536 step size=1
phyDn String of characters
qosDN String of characters
tla String of characters
ccpNbapVCLs vpi 0 through 255 step size=1
vci 32 through 65536 step size=1
phyDn String of characters
qosDN String of characters
ccpId 0 through 65535 step size=1
nbcpNbapVCLs vpi 0 through 255 step size=1
vci 32 through 65536 step size=1
phyDn String of characters
NodeB object descriptions IubInterface
...................................................................................................................................................................................................................................
3-78 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
qosDN String of characters
userplaneBVCLs aal2PathId 1 through 2147483647 step size=1
vpi 0 through 255 step size=1
vci 32 through 65536 step size=1
phyDn String of characters
qosDN String of characters
priority 0 through 255 step size=1
NodeB object descriptions IubInterface
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-79
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
NodeB...................................................................................................................................................................................................................................
Full name
Node B
Description
This object represents a Node B network element in the UTRAN domain.
The NodeB object controls radio transmission and radio reception for one or more Cellobjects in the network.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for modifying a NodeB object usingthe set command.
• If the degrees value of attributelongitude is set to 180,minutes andsecondsmust be 0.
• If the degrees value of attributelatitude is set to 90,minutes andseconds mustbe 0.
• To set thenodeBType attribute, the NodeB object must be locked.
• To set thenodeBType attribute, no instance of IOU, URC, UCU, Radio, CPC CTU,OM, or TxAmp may exist.
The following list outlines the object constraints for modifying a NodeB object usingthe unlock command.
• The resetRequired attribute must be “false”.
• The IubInterface object must exist.
Attributes
The following attributes apply to the NodeB object and are available through the GUIand CLI.
Attribute/Name Required Description Value
addGBRTransmitPower
(Addtional GBR transmitpower)
no (RW) This parameter controls howthe transmit power for GBRtraffic is handled in NodeBcommon powermeasurements.
true
false
Default = true
administrativeState no (RO) The administrative state ofthe managed object.
locked
NodeB object descriptions
...................................................................................................................................................................................................................................
3-80 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(Administrative state) unlocked
shuttingDown
Default: locked
associatedRNC
(Associated RNC)
no (RW) The Distinguished Name(DN) of the RNC that isassociated with this Node B.
String of characters
No default
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
backupImageName
(Backup image name)
no (RO) The name of the backupfile.
0 through 52
Default = NodeB.bkp
backupStatus no (RO) The status of the latestbackup activity.
failed
(Backup status) successful
inProgress
partialSuccess
notAvailable
Default: notAvailable
commonERGCHPowerOffset
(Common ERGCH PowerOffset)
no (RW) Power offset in dB ofcommon E-RGCH relativeto PCPICH.
-35.0 through 15.0 stepsize=0.1
Default = 0.0
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-81
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
currentSoftwareVersion
(Current software version)
no (RO) The version of the softwarethat is currently running onthe related component.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
daylightSavingsTimeEndRule
(Daylight saving time end)
no (RW) This attribute defines therule that indicates when tochange back to standardtime at the end of daylightsaving time.
Any valid string.
The maximum lengthis 13 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
daylightSavingsTimeStar-tRule
(Daylight saving time start)
no (RW) This attribute defines therule that indicates when tochange to daylight savingtime.
Any valid string.
The maximum lengthis 13 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
deltaDownServingCellNoHO
(Down step size for ServingCell No HO)
no (RW) Down step size in dB forE-HICH outer loop powercontrol when the E-DCHRLS only contains theserving cell.
0 through 1000 stepsize=1
Default = 20
detectedNodeBType no (RO) The NodeB type that isphysically present.
unknownNodeBType
(Detected NodeB) macroCellIndoorTypeF
macroCellIndoorTypeH
macroCellIntegrated-Outdoor
modularCellOutdoor
compactIndoor
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................
3-82 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
compactOutdoor
microCellOutdoor
baseBandUnit
baseBandUnitWithRFU
lowProfileBBUIndoor
lowProfileBBUOutdoor
Default:unknownNodeBType
eAGCHPowerOffset
(E-AGCH Power Offset)
no (RW) This parameter defines thepower offset in dB forAGCH.
-45.0 through 65.0 stepsize=0.1
Default = 10.0
eDCHNumCommonRGPer-Code
(Common relative grants(E-RGCH/ E-HICH code))
no (RW) The number of signaturesfor common relativegrants,which are reservedper E-RGCH/ E-HICH code.
1 through 4 step size=1
Default = 1
eDCHServiceParameterSet1
(E-DCH Service ParameterSet1)
no (RW) This parameter set definesthe OAM parameters, whichare valid for the interactive″gold″ service class (highestpriority).
See“Structure ofNodeB values”(p. 3-95).
Default = {15,
40,
300,
7,
7}
eDCHServiceParameterSet2
(E-DCH Service ParameterSet2)
no (RW) This parameter set definesthe OAM parameters, whichare valid for the interactive″silver″ service class(medium priority).
See“Structure ofNodeB values”(p. 3-95).
Default = {14,
25,
200,
10,
7}
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-83
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
eDCHServiceParameterSet3
(E-DCH Service ParameterSet3)
no (RW) This parameter set definesthe OAM parameters, whichare valid for the interactive″bronze″ service class(lowest priority).
See“Structure ofNodeB values”(p. 3-95).
Default = {13,
10,
100,
14,
7}
eDCHServiceParameterSet4
(E-DCH Service ParameterSet4)
no (RW) This parameter set definesthe OAM parameters whichare valid for the backgroundservice class.
See“Structure ofNodeB values”(p. 3-95).
Default = {12,
0,
100,
15,
7}
eDCHSofterHOLimit
(E-DCH Softer handoverlimit)
no (RW) The limit ratio of theE-DCH load caused by usersfrom the other cells in thesame NodeB to the totalE-DCH load.
0 through 100 stepsize=1
Default = 40
eHICHErrorProbability
(E-HICH Error Probability)
no (RW) E-HICH miss detectionprobability (ACK toDTX/NACK) when theE-DCH RLS only containsthe serving cell.
1 through 255 stepsize=1
Default = 10
expectedNodeBType no (RW-LO) The NodeB type theoperator expects to beinstalled.
unknownNodeBType
(Expected Node B type) macroCellIndoorTypeF
macroCellIndoorTypeH
macroCellIntegrated-Outdoor
modularCellOutdoor
compactIndoor
compactOutdoor
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................
3-84 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
microCellOutdoor
baseBandUnit
baseBandUnitWithRFU
lowProfileBBUIndoor
lowProfileBBUOutdoor
Default:unknownNodeBType
fallbackSoftwareVersion
(Fallback software version)
no (RO) The software version thatcan be used as fallback.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
genericDescriptorFile
(Generic descriptor file)
no (RW) Path and file name of theGeneric Descriptor File(GDF) that defines thesoftware versions of theactual image for allcomponents.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
hsdpaAmpUsage
(HSDPA Amplifier PowrUsage)
no (RW) This parameter states howmuch percentage of theshort-term amplifier powercan be allocated before AOCscaling.
0 through 100 stepsize=1
Default = 80
hsdpaMinAmpUsage
(Minimum HSDPAAmplifier Power Usage)
no (RW) This parameter states theminimum percentage of theshort-term amplifier powerthat will be allocated toHSDPA.
0 through 100 stepsize=1
Default = 10
hsdpaResourceAllocation-Scheme
no (RW-LO) Controls UCU allocationscheme for HSDPA support.
smallModel
(Universal channel unitallocation scheme)
largeModel
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-85
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default: smallModel
hSDSCHServiceParameter-Set1
(HSDSCH ServiceParameters, set 1)
no (RW) This parameter set definesthe OAM parameters, whichare valid for the servicewithin the specificscheduling Priority Level.
See“Structure ofNodeB values”(p. 3-95).
Default = {15,
40,
300,
0,
10,
0,
7,
15}
hSDSCHServiceParameter-Set2
(HSDSCH ServiceParameters, set 2)
no (RW) This parameter set definesthe OAM parameters, whichare valid for the servicewithin the specificscheduling Priority Level.
See“Structure ofNodeB values”(p. 3-95).
Default = {14,
40,
300,
0,
10,
0,
7,
15}
hSDSCHServiceParameter-Set3
(HSDSCH ServiceParameters, set 3)
no (RW) This parameter set definesthe OAM parameters, whichare valid for the servicewithin the specificscheduling Priority Level.
See“Structure ofNodeB values”(p. 3-95).
Default = {13,
40,
300,
0,
10,
0,
7,
7}
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................
3-86 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
hSDSCHServiceParameter-Set4
(HSDSCH ServiceParameters, set 4)
no (RW) This parameter set definesthe OAM parameters, whichare valid for the servicewithin the specificscheduling Priority Level.
See“Structure ofNodeB values”(p. 3-95).
Default = {12,
40,
300,
0,
10,
0,
7,
7}
hSDSCHServiceParameter-Set5
(HSDSCH ServiceParameters, set 5)
no (RW) This parameter set definesthe OAM parameters, whichare valid for the servicewithin the specificscheduling Priority Level.
See“Structure ofNodeB values”(p. 3-95).
Default = {11,
40,
300,
0,
10,
0,
7,
7}
hSDSCHServiceParameter-Set6
(HSDSCH ServiceParameters, set 6)
no (RW) This parameter set definesthe OAM parameters, whichare valid for the servicewithin the specificscheduling Priority Level.
See“Structure ofNodeB values”(p. 3-95).
Default = {10,
40,
300,
0,
10,
0,
7,
7}
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-87
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
hSDSCHServiceParameter-Set7
(HSDSCH serviceparameters, set 7)
no (RW) This parameter set definesthe OAM parameters, whichare valid for the servicewith the specific schedulingPriority Level.
See“Structure ofNodeB values”(p. 3-95).
Default = {9,
40,
300,
0,
10,
0,
7,
7}
hSDSCHServiceParam-eterSetFt
(HSDSCH ServiceParameters, fair throughput)
no (RO) This parameter set definesthe OAM parameters, whichare used for all services,when the scheduling modehas been set to″fairthroughput″.
See“Structure ofNodeB values”(p. 3-95).
Default = {126,
130,
0,
5,
13}
hSDSCHServiceParam-eterSetUc
(HSDSCH ServiceParameters,unconstrained)
no (RO) This parameter set definesthe OAM parameters, whichare used for all services,when the scheduling modehas been set to″unconstrained″.
See“Structure ofNodeB values”(p. 3-95).
Default = {0,
1000,
0,
1,
1}
hSSCCHSnr
(HS-SCCH signal to noiseratio)
no (RW) The target symbol signal tonoise ratio on HS-SCCH,which is used by thescheduling algorithm.
-5.0 through 19.0 stepsize=0.1
Default = 1.0
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................
3-88 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
itfNDN
(Itf-N distinguished name)
no (RW) The Distinguished Name(DN) of the Itf-N object thatis related to this instance.
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
lastBackupTime
(Last backup time)
no (RO) The date-and-time stamp ofthe last successful backup.
0 through 52
Default = 1970-01-0100:00:00
latitude
(Latitude)
no (RW) The geographical position ofthe network element.
See“Structure ofNodeB values”(p. 3-95).
Default = {0,
0,
0,
northern}
lmtRegistered
(LMTRegistered)
no (RO) This indicates whether theNodeB is exclusivelycontrolled by a LocalMaintenance Terminal(LMT).
true
false
Default = false
locationName
(Location name)
no (RW) The physical location of thiselement.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-89
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
longitude
(Longitude)
no (RW) The geographical position ofthe network element.
See“Structure ofNodeB values”(p. 3-95).
Default = {0,
0,
0,
western}
maxPowerCorrection
(Maximum PowerCorrection, E-HICH)
no (RW) Upper limit, in dB, of theE-HICH outer loop powercontrol correction.
-12.8 through 12.7 stepsize=0.1
Default = 3.0
mimVersion
(Management informationmodel version)
no (RO) The version of theManagement InformationModel (information model)that is supported by thismanagement agent.
Any valid string.
The maximum lengthis 50 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
minPowerCorrection
(Minimum PowerCorrection, E-HICH)
no (RW) Lower limit in dB of theE-HICH outer loop powercontrol correction.
-12.8 through 12.7 stepsize=0.1
Default = 3.0
ndpLabel
(Network data provisioningcell label)
no (RW) Label used to identify thecell in the NDP planningtools.
Any valid string.
The maximum lengthis 255 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................
3-90 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
newSoftwareVersion
(New software version)
no (RO) The software version of thesoftware image loaded mostrecently.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
oamIpAddress
(Operations, administrationand maintenance internetprotocol address)
no (RO) The Operations,Administration andMaintenance (OAM) IPaddress of this networkelement agent.
String of characters
Default = 0.0.0.0
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
perfMeasEnabled no (RW) Allows the operator toenable or disableperformance measurementcollection.
yes
(Performance measurementsenabled)
no
Default: yes
pMaxDlEDCH
(Maximal power level,E-DCH )
no (RW) Maximal power level ofbase E-DCH channel level.
-35.0 through 15.0 stepsize=0.1
Default = 6.0
pMinDlEDCH
(Minimal power level,E-DCH )
no (RW) Minimal power level of baseE-DCH channel level.
-35.0 through 15.0 stepsize=0.1
Default = -18.0
powerOffsetERGCHServing-NoSHO
(ERGCH Power offset,Serving Cell No SHO)
no (RW) Power offset in dB that isapplied to base E-DCHchannel level when theE-DCH RLS only containsthe serving cell.
-12.8 through 12.7 stepsize=0.1
Default = 1.5
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-91
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
powerOffsetERGCHServ-ingSHO
(ERGCH Power offset,Serving Cell SHO)
no (RW) Power offset in dB that isapplied to base E-DCHchannel level when theE-DCH RLS contains theserving cell and other cells.
-12.8 through 12.7 stepsize=0.1
Default = 1.5
powerTestEnabled no (RW) Indicates whether thecarrier-power test should beperformed on the Node B.
yes
(Power test measurementenabled)
no
Default: no
powerTestThreshold
(Power test measurementthreshold)
no (RW) An alarm is triggered if themeasured carrier powerdrops below or exceeds thisthreshold level in a Node B.
0.5 through 5.0
Default = 1.0
prefixItfNDN
(Itf-N DN prefix)
no (RW) Prefix for the Itf-NDistinguished Name (DN)related to this instance.
Any valid string.
The maximum lengthis 400 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
rfTestsInterval
(Radio frequency testinterval)
no (RW) The measurement intervalfor the RF tests that areperformed on the Node B.
10 through 1440 stepsize=1
Default = 1440
rfTestsTime
(Radio frequency test time)
no (RW) This attribute is used to setthe time of the day (hoursand minutes) to start the RFtests on a Node B.
See“Structure ofNodeB values”(p. 3-95).
Default = {2,
30}
routineDiagEnabled no (RW) Indicates whether routinediagnostic programs shouldrun on the Node B.
yes
(Routine diagnosticsenabled)
no
Default: no
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................
3-92 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
routineDiagTime
(Routine diagnostic time)
no (RW) The time of the day whenthe routine diagnosticprograms should run on theNode B.
See“Structure ofNodeB values”(p. 3-95).
Default = {2,
30}
rPGAdjustmentMode no (RW) This attribute controls thesetting of attenuation valuesfor the RX amplifiers.
manual
(rPGA attenuation values) autoContinous
autoNonContinous
Default: manual
rxAntennaTestThreshold
(Receive antenna testthreshold)
no (RW) This defines the thresholdfor the receive antenna test.
0.5 through 15.0
Default = 10.0
rxTestEnabled no (RW) Controls whether the RadioCluster Server (RCS) has toperform the scheduledreceive-antenna tests.
yes
(Receive antenna testenabled)
no
Default: no
securityMode no (RO) The security mode of theNodeB.
minSecurityMode
(Security mode) standardSecurityMode
Default:minSecurityMode
suState no (RO) The state of thesoftware-upgrade process.
invalidState
(Software update state) downloadInProgress
downloadComplete
downloadFailed
installInProgress
installComplete
installFailed
switchOverInProgress
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-93
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
activateInProgress
activateComplete
activateFailed
partiallyActivated
fallbackInProgress
fallbackComplete
fallbackFailed
deleteInProgress
deleteComplete
deleteFailed
downloadAborted
distributionInProgress
distributionComplete
distributionFailed
Default: invalidState
swDownloadResult
(Software download result)
no (RO) The result of the lastsoftware download.
0 through 100
Default = no result yet
syncSource no (RW-LO) The synchronization sourcethat is used by the CommonTiming Unit (CTU) tosynchronize the signal of theoscillator module.
internalReference
(Synchronization source) externalReference
internalGPSClock
externalGPSClock
Default:internalReference
timeZone
(Time zone)
no (RW-LO) Time zone information innumeric format according toRFC 2822.
0 through 5
Default = +0000
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................
3-94 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
tPreempt
(Timer pre-emption)
no (RW) Specifies the maximum timethat a Node B may wait forpre-emption of resources forestablishment orreconfiguration of radiolinks.
0.0 through 5.0 stepsize=0.1
Default = 0.0
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
Structure of NodeB values
The following table describes the value format used for the NodeB object attribute.
Attribute Sequence of structure Values
eDCHServiceParam-eterSet1
schedulingPriorityLevel 0 through 15 step size=1
serviceMinRate 0 through 10000 step size=1
serviceMaxRate 0 through 10000 step size=1
serviceBFactor 1 through 30 step size=1
serviceKFactor 1 through 30 step size=1
eDCHServiceParam-eterSet2
schedulingPriorityLevel 0 through 15 step size=1
serviceMinRate 0 through 10000 step size=1
serviceMaxRate 0 through 10000 step size=1
serviceBFactor 1 through 30 step size=1
serviceKFactor 1 through 30 step size=1
eDCHServiceParam-eterSet3
schedulingPriorityLevel 0 through 15 step size=1
serviceMinRate 0 through 10000 step size=1
serviceMaxRate 0 through 10000 step size=1
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-95
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
serviceBFactor 1 through 30 step size=1
serviceKFactor 1 through 30 step size=1
eDCHServiceParam-eterSet4
schedulingPriorityLevel 0 through 15 step size=1
serviceMinRate 0 through 10000 step size=1
serviceMaxRate 0 through 10000 step size=1
serviceBFactor 1 through 30 step size=1
serviceKFactor 1 through 30 step size=1
hSDSCHServiceParam-eterSet1
schedulingPriorityLevel 0 through 15 step size=1
serviceMinRate 0 through 10000 step size=1
serviceMaxRate 0 through 10000 step size=1
serviceLowRate 0 through 1000 step size=1
serviceHighRate 0 through 1000 step size=1
serviceMaxDelay 0 through 10000 step size=2
serviceBFactor 1 through 30 step size=1
serviceKFactor 1 through 30 step size=1
hSDSCHServiceParam-eterSet2
schedulingPriorityLevel 0 through 15 step size=1
serviceMinRate 0 through 10000 step size=1
serviceMaxRate 0 through 10000 step size=1
serviceLowRate 0 through 1000 step size=1
serviceHighRate 0 through 1000 step size=1
serviceMaxDelay 0 through 10000 step size=2
serviceBFactor 1 through 30 step size=1
serviceKFactor 1 through 30 step size=1
hSDSCHServiceParam-eterSet3
schedulingPriorityLevel 0 through 15 step size=1
serviceMinRate 0 through 10000 step size=1
serviceMaxRate 0 through 10000 step size=1
serviceLowRate 0 through 1000 step size=1
serviceHighRate 0 through 1000 step size=1
serviceMaxDelay 0 through 10000 step size=2
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................
3-96 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
serviceBFactor 1 through 30 step size=1
serviceKFactor 1 through 30 step size=1
hSDSCHServiceParam-eterSet4
schedulingPriorityLevel 0 through 15 step size=1
serviceMinRate 0 through 10000 step size=1
serviceMaxRate 0 through 10000 step size=1
serviceLowRate 0 through 1000 step size=1
serviceHighRate 0 through 1000 step size=1
serviceMaxDelay 0 through 10000 step size=2
serviceBFactor 1 through 30 step size=1
serviceKFactor 1 through 30 step size=1
hSDSCHServiceParam-eterSet5
schedulingPriorityLevel 0 through 15 step size=1
serviceMinRate 0 through 10000 step size=1
serviceMaxRate 0 through 10000 step size=1
serviceLowRate 0 through 1000 step size=1
serviceHighRate 0 through 1000 step size=1
serviceMaxDelay 0 through 10000 step size=2
serviceBFactor 1 through 30 step size=1
serviceKFactor 1 through 30 step size=1
hSDSCHServiceParam-eterSet6
schedulingPriorityLevel 0 through 15 step size=1
serviceMinRate 0 through 10000 step size=1
serviceMaxRate 0 through 10000 step size=1
serviceLowRate 0 through 1000 step size=1
serviceHighRate 0 through 1000 step size=1
serviceMaxDelay 0 through 10000 step size=2
serviceBFactor 1 through 30 step size=1
serviceKFactor 1 through 30 step size=1
hSDSCHServiceParam-eterSet7
schedulingPriorityLevel 0 through 15 step size=1
serviceMinRate 0 through 10000 step size=1
serviceMaxRate 0 through 10000 step size=1
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-97
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
serviceLowRate 0 through 1000 step size=1
serviceHighRate 0 through 1000 step size=1
serviceMaxDelay 0 through 10000 step size=2
serviceBFactor 1 through 30 step size=1
serviceKFactor 1 through 30 step size=1
hSDSCHServiceParam-eterSetFt
serviceMinRate 0 through 10000 step size=1
serviceMaxRate 0 through 10000 step size=1
serviceMaxDelay 0 through 10000 step size=2
serviceBFactor 1 through 30 step size=1
serviceKFactor 1 through 30 step size=1
hSDSCHServiceParam-eterSetUc
serviceMinRate 0 through 10000 step size=1
serviceMaxRate 0 through 10000 step size=1
serviceMaxDelay 0 through 10000 step size=2
serviceBFactor 1 through 30 step size=1
serviceKFactor 1 through 30 step size=1
latitude degrees 0 through 90 step size=1
minutes 0 through 59 step size=1
seconds 0 through 59 step size=1
latitude hemisphere northern
southern
longitude degrees 0 through 180 step size=1
minutes 0 through 59 step size=1
seconds 0 through 59 step size=1
longitude hemisphere western
eastern
rfTestsTime hours 0 through 23 step size=1
mins 0 through 59 step size=1
routineDiagTime hours 0 through 23 step size=1
mins 0 through 59 step size=1
NodeB object descriptions NodeB
...................................................................................................................................................................................................................................
3-98 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
OCM...................................................................................................................................................................................................................................
Full name
OCM
Description
The OCM object represents a hardware resource of type OneBTS CPRI Module. TheOCM connects a NodeB with external RF units. This is done via CPRI porttransceivers, which can be plugged into the OCM hardware.
Hierarchical location
Hierarchical location of the OCM object:
Object constraints and supported actions
You can create, delete, or modify this object.
Attributes
The following attributes apply to the OCM object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
NodeB
IubInterface
DigitalShelf
OCM
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-99
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
detectedOCMHardware-Model
no (RO) This read only attributestores the hardware modelof the equipped OCM board,which is represented by theOCM MOI.
unknownHardware-Model
(OCM hardware model) oCM
oCM_II
Default:unknownHardware-Model
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
NodeB object descriptions OCM
...................................................................................................................................................................................................................................
3-100 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
NodeB object descriptions OCM
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-101
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
NodeB object descriptions OCM
...................................................................................................................................................................................................................................
3-102 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
OM...................................................................................................................................................................................................................................
Full name
Oscillator module
Description
This object represents the physical Oscillator Module (OM) component on a Node Bdigital shelf.
The OMs generate a 15 MHz reference signal and supply it to the Common TimingUnit (CTU). The OMs also serve as stabilization and fallback frequency referencesource if the Global Positioning System (GPS) or E1/T1 timing signal is lost.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an OM object.
• If nodeBType is “indoorHybrid” or “compact”, the Relative Distinguished Name(RDN) of the OM must be 1.
• A supporting Universal Radio Controller (URC) object must exist.
• The value of attributeshelfNumber shall be derived from the parent shelf(DigitalShelf shelfNumber).
Attributes
The following attributes apply to the OM object and are available through the GUI andCLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-103
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
detectedOMHardwareModel no (RO) The OM hardware modelthat is physically present inthe NodeB.
unknownOMHardware-Model
(Detected oscillator module) oMQ
oMR
oMA
Default:unknownOMHardware-Model
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
expectedOMHardwareModel yes (RO-SC) The OM hardware model theoperator expects to beinstalled.
unknownOMHardware-Model
(Expected oscillator module) oMQ
NodeB object descriptions OM
...................................................................................................................................................................................................................................
3-104 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
oMR
oMA
Default:unknownOMHardware-Model
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
NodeB object descriptions OM
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-105
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
NodeB object descriptions OM
...................................................................................................................................................................................................................................
3-106 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
PassthroughVCLTP...................................................................................................................................................................................................................................
Full name
PassthroughVCLTP
Description
This object represents the virtual circuit link (VCL) termination point used for theEthernet Port.
Object constraints and supported actions
You can create, delete, and modify this object:
The following list outlines the object constraints for creating a PassthroughVCLTPobject:
• The associated E1T1Port, E3T3Port, STM1OC3Port, or IMAGroup (referenced inPassthroughVCLTP::backhaulPort) must already exist
• The vpi/vci pair in the PassthroughVCLTP::backhaulPort must be unique fromthose used in VCL arrays in any IubInterface object(s) useing the same E1T1Port,E3T3Port, STM1OC3Port or IMAGroup as the bachaulPort
• If PassthroughVCLTP::backhaulPort references an E1T1Port, this E1T1Port mustnot be referenced by an IMAGroup MOI as in attribute IMAGroup.iMAE1T1Links
• The value of atmclass must not equal abr
• If atmClass equals vbrRt or vbrNrt the value of PassthroughVCLTP::peakcellratemust be greater than or equal to the value of sustainedcellrate. The value ofsustainedCellRate must be greater than 150cells/second
• If atmClass equals ubr the value of PassthroughVCLTP::peakCellRate must begreater than or equal to the value of minCellRate
• If atmClass equals ubr the value of PassthroughVCLTP::peakCellRate must begreater than 150 cells/second
• If atmClass equals ubr the value of PassthroughVCLTP::minCellRate must begreater than 150 cells/second.
The PassthroughVCLTP object must be locked before it can be deleted.
Attributes
The following attributes apply to the PassthroughVCLTP object and are availablethrough the GUI and CLI.
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-107
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
aalType yes (RO-SC) The ATM Adaptation Layer(AAL) type that is allowedfor this connection.
aal2
(ATM adaptation layer type) aal5
No default
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: locked
atmClass yes (RO-SC) The ATM service type. cbr
(ATM class) vbrRt
vbrNrt
ubr
abr
No default
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
backhaulPort
(Backhaul Port)
yes (RO-SC) The distinguished name(DN) of the backhaul portwhich is associated with thisPassthroughVCLTP object.
String of characters
No default
NodeB object descriptions PassthroughVCLTP
...................................................................................................................................................................................................................................
3-108 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
maxBurstSize
(Maximum burst size)
yes (RO-SC) The maximum burst sizethat is allowed for this ATMservice class.
0 through 65535 stepsize=1
No default
minCellRate
(Minimum cell rate)
yes (RO-SC) The minimum cell rate thatis permitted for this serviceclass.
0 through 2147483647step size=1
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
peakCellRate
(Peak cell rate)
yes (RO-SC) The peak cell rate that ispermitted for this serviceclass.
0 through 2147483647step size=1
No default
sustainedCellRate
(Sustained cell rate)
yes (RO-SC) The long-term average cellrate that is permitted for thisATM service class.
0 through 2147483647step size=1
No default
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vci
(Virtual channel identifier)
yes (RO-SC) This attribute defines thevirtual channel identifier(VCI) for thePassthroughVCLTP object.
1 through 65536 stepsize=1
No default
vpi
(Virtual path identifier)
yes (RO-SC) This attribute defines thevirtual path identifier (VPI)for the PassthroughVCLTPobject.
0 through 255 stepsize=1
No default
NodeB object descriptions PassthroughVCLTP
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-109
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
QoS...................................................................................................................................................................................................................................
Full name
Quality of service
Description
This object represents a logical object that defines Quality of Service (QoS) attributesfor Virtual Channel Connections (VCLs).
Common attributes
This object has attributes that are common to other objects. If these attributes areupdated for this object, then the corresponding attributes must also be updated on therelevant objects.
See“QoS” (p. A-6) in Appendix A, “Common attributes”for details.
Object constraints and supported actions
You can create and modify this object.
The following list outlines the object constraints for deleting a QoS object.
• The QoS object instance only is allowed to be deleted if attributerefList isempty.
Attributes
The following attributes apply to the QoS object and are available through the GUIand CLI.
Attribute/Name Required Description Value
aalType yes (RO-SC) The ATM Adaptation Layer(AAL) type that is allowedfor this connection.
aal2
(ATM adaptation layer type) aal5
No default
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
atmClass yes (RO-SC) The ATM service type. cbr
NodeB object descriptions
...................................................................................................................................................................................................................................
3-110 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
(ATM class) vbrRt
vbrNrt
ubr
abr
No default
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
maxBurstSize
(Maximum burst size)
yes (RO-SC) The maximum burst sizethat is allowed for this ATMservice class.
0 through 65535 stepsize=1
No default
maxCPSPacketPayloadSize
(CPS Packet Size)
yes (RO-SC) This parameter defines themaximum size of an AAL2CPS-Packet payload.
1 through 64 stepsize=1
Default = 64
minCellRate
(Minimum cell rate)
yes (RO-SC) The minimum cell rate thatis permitted for this serviceclass.
0 through 2147483647step size=1
No default
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
NodeB object descriptions QoS
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-111
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
peakCellRate
(Peak cell rate)
yes (RO-SC) The peak cell rate that ispermitted for this serviceclass.
0 through 2147483647step size=1
No default
refList
(Reference list)
no (RO) The Distinguished Names(DNs) of the objects thatreference this ATMquality-of-service object.
Sequenceof 0 through8 records, using thefollowing value(s):
String of characters
No default
sustainedCellRate
(Sustained cell rate)
yes (RO-SC) The long-term average cellrate that is permitted for thisATM service class.
0 through 2147483647step size=1
No default
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions QoS
...................................................................................................................................................................................................................................
3-112 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Radio...................................................................................................................................................................................................................................
Full name
Radio
Description
This object represents the physical UMTS CDMA Radio (UCR) component of theNode B.
In the downlink direction, the UCR receives the signals from the UTRA Channel Units(UCUs) and converts them to modulated RF signals. In the uplink direction, the UCRdetects and demodulates the receive RF signals, and sends the digital data to thechannel units.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating a Radio object.
• At least one Common Timing Unit (CTU) object instance must exist
• At least one associated RxAmp objectassociatedRxAmps must be provided, and itmust already exist. If two RxAmp objects are provided, both must already exist.The value pairs of the Relative Distinguished Names (RDNs) of the parent Filterobject of the two associated RxAmp objects must be 1, 2 or 3, 4 or 5, 6.
• The RxAmps listed inassociatedRxAmps may not be referenced in any otherexisting Radio object.
• At least one associated TxAmp objectassociatedTxAmps must be provided, and itmust already exist. If two TxAmp objects are provided, these rules apply:
– nodeBType must not be “indoorHybrid”
– Both TxAmps must already exist
– Both txAmpType attributes must be identical
– Both txAmpType attributes must not be “p1PAM1900”
– The value pairs of the RDNs of these two associated TxAmps must be 1, 2 or3, 4 or 5, 6 fornodeBType = “compact” and 1, 2 or 5, 6 or 9, 10 for any othervalue ofnodeBType.
• The TxAmps listed inassociatedTxAmps may not be referenced in any otherexisting Radio object.
• TxAmps and Filters are fixed assigned to a sector and dependent on the value ofattributenodeBType. Only certain combinations of value pairs of the RDNs of theFilters which are the parents of the RxAmps identified by the attributeassociatedRxAmps, and the values of the attributeassociatedTxAmp are allowed.
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-113
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
If nodeBType is “indoorFull”, “integrated”, “modcell”, or “futureType” these rulesapply:
– If RDN (associatedRxAmps) = 1 and/or 2 thenassociatedTxAmp must be 1 or1 + 2
– If RDN (associatedRxAmps) = 3 and/or 4 thenassociatedTxAmp must be 5 or5 + 6
– If RDN (associatedRxAmps) = 5 and/or 6 thenassociatedTxAmp must be 9 or9 + 10.
If nodeBType is “compact” these rules apply:
– If RDN (associatedRxAmps) = 1 and/or 2 thenassociatedTxAmp must be 1 or1 + 2
– If RDN (associatedRxAmps) = 3 and/or 4 thenassociatedTxAmp must be 3 or3 + 4
– If RDN (associatedRxAmps) = 5 and/or 6 thenassociatedTxAmp must be 5 or5 + 6.
If nodeBType is “indoorHybrid” these rules apply:
– If RDN (associatedRxAmps) = 1 and/or 2 thenassociatedTxAmp must be 1
– If RDN (associatedRxAmps) = 3 and/or 4 thenassociatedTxAmp must be 2
– If RDN (associatedRxAmps) = 5 and/or 6 thenassociatedTxAmp must be 3.
• The value of attributeshelfNumber shall be derived from the parent shelf(DigitalShelf shelfNumber).
The following list outlines the object constraints for deleting a Radio object.
• All associated Cell objects must be deleted first (associatedCell must be empty).
Attributes
The following attributes apply to the Radio object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: locked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
NodeB object descriptions Radio
...................................................................................................................................................................................................................................
3-114 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
associatedCell
(Associated cell)
no (RO) The Distinguished Name(DN) of the cell object thatis associated with this radio.
String of characters
No default
associatedRxAmps
(Associated receiveamplifiers)
no (RO) The Distinguished Name(DN) of the RxAmp objectthat is associated with thisradio. For receive diversityan association with twoRxAmps is needed.
Sequenceof 1 through2 records, using thefollowing value(s):
String of characters
No default
associatedTxAmps
(Associated transmitamplifiers)
no (RO) The Distinguished Name(DN) of the TxAmp objectthat is associated with thisradio.
Sequenceof 1 through2 records, using thefollowing value(s):
String of characters
No default
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
NodeB object descriptions Radio
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-115
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
detectedRadioHardware-Model
no (RO) The radio hardware modelthat is physically present inthe NodeB.
unknownRadioHard-wareModel
(Detected radio model) uCR_BAND_V
uCR_BAND_II
uCR_BAND_I
mCR_BAND_V
mCR_BAND_II
mCR_BAND_I
mCR_BAND_IX
mCR_BAND_VIII
mCR_BAND_IV
mCR_BAND_X
Default:unknownRadioHard-wareModel
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
expectedRadioHardware-Model
yes(RW-LO)
The radio hardware modelthe operator expects to beinstalled.
unknownRadioHard-wareModel
(Expected radio model) uCR_BAND_V
uCR_BAND_II
uCR_BAND_I
mCR_BAND_V
mCR_BAND_II
mCR_BAND_I
mCR_BAND_IX
mCR_BAND_VIII
mCR_BAND_IV
mCR_BAND_X
Default:unknownRadioHard-wareModel
NodeB object descriptions Radio
...................................................................................................................................................................................................................................
3-116 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
supportedRFpath
(supported Radio Frequencypath)
no (RO) This read only attributeuniquely identifies the RFpath the radio is able tosupport.
See“Structure ofRadio values”(p. 3-118).
Default is an emptysequence.
NodeB object descriptions Radio
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-117
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
Structure of Radio values
The following table describes the value format used for the Radio object attribute.
Attribute Sequence of structure Values
supportedRFpath sectorID 0 through 3 step size=1
perSectorID 1 through 6 step size=1
supportedRFpath frequencyBand bAND_V
bAND_IX
bAND_II
bAND_I
bAND_VIII
bAND_IV
bAND_X
NodeB object descriptions Radio
...................................................................................................................................................................................................................................
3-118 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
RETActuator...................................................................................................................................................................................................................................
Full name
Remote electrical tilt actuator
Description
This class models the physical antenna tilt actuators.
Hierarchical location
Hierarchical location of the RETActuator object:
Object constraints and supported actions
You can modify this object.
Attributes
The following attributes apply to the RETActuator object and are available through theGUI and CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
antennaGroup no (RO) This attribute displays thetype of the antenna which istilted by this instance of theRETActuator.
txMain
(Antenna group) txDiv
rxMain
rxDiv
tRxMain
NodeB
RETActuator
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-119
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
tRxDiv
tRxMainRxDiv
tRxMainTRxDiv
Default: txMain
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
associatedCell
(Associated cell)
no (RO) The Distinguished Name(DN) of the cell object thatis associated with this radio.
String of characters
No default
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
currentElectricalTilt
(Current electrical tilt)
no (RO) This attribute displays thecurrent electrical tilt settingfor this actuator.
-90.0 through 90.0 stepsize=0.1
Default = -90.0
NodeB object descriptions RETActuator
...................................................................................................................................................................................................................................
3-120 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
maximumElectricalTilt
(Maximum electrical tilt)
no (RO) This attribute displays themaximum electrical tiltsupported by this actuator.
-90.0 through 90.0 stepsize=0.1
Default = -90.0
mechanicalTilt
(Mechanical tilt)
no (RO) This attribute displays themechanical tilt of thisactuator.
-90.0 through 90.0 stepsize=0.1
Default = -90.0
minimumElectricalTilt
(Minimum electrical tilt)
no (RO) This attribute displays theminimum electrical tiltsupported by this actuator.
-90.0 through 90.0 stepsize=0.1
Default = -90.0
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
sectorNumber
(Sector number)
no (RO) The sector number of thiscell (or of thissector-carrier).
1 through 3 step size=1
Default = 1
NodeB object descriptions RETActuator
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-121
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
NodeB object descriptions RETActuator
...................................................................................................................................................................................................................................
3-122 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
RFHead...................................................................................................................................................................................................................................
Full name
RFHead
Description
The RFHead object represents the RF Head, a piece of equipment external to theNodeB. The purpose of the RF Head is to provide the RF resources in a locationremote from the base station.
The RF Head module includes a Filter, Rx/TxAmp, and Radio, and is connected to theNodeB via an optical link. It is a single, field replaceable, unit which can only bereplaced as a whole and is modeled as a single MO.
Hierarchical location
Hierarchical location of the RFHead object:
Object constraints and supported actions
You can create, delete, or modify this object.
Attributes
The following attributes apply to the RFHead object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
NodeB
RFHead
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-123
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
associatedCell
(Associated cell)
no (RO) The Distinguished Name(DN) of the cell object thatis associated with this radio.
String of characters
No default
associatedCPRIPort
(Common Public RadioInterface port)
no (RO) This read only attributestores the distinguishedname (DN) of the associatedCPRIPort.
String of characters
No default
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
detectedRFHeadHardware-Model
no (RO) This read only parameterindicates the installed RFHead hardware type detectedby the NodeB.
unknownRFHeadHard-wareModel
(Detected RF Head) internal_BAND_I
external_BAND_I
internal_BAND_II
NodeB object descriptions RFHead
...................................................................................................................................................................................................................................
3-124 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
external_BAND_II
internal_BAND_V
external_BAND_V
internal_BAND_VIII
external_BAND_VIII
internal_BAND_IV
external_BAND_IV
internal_BAND_X
external_BAND_X
internal_BAND_IX
external_BAND_IX
Default:unknownRFHeadHard-wareModel
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
externalAlarms
(External alarms)
no (RW) The specific characteristicsof each external alarm thatis connected to thisinput/output unit.
Sequenceof 0 through40 records, using thefollowing value(s):
See“Structure ofRFHead values”(p. 3-128).
Default is an emptysequence.
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions RFHead
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-125
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
portConnectivity
(Port connectivity)
no (RO) This read only attributedefines the position of anRFHead in a daisy chain.
Sequenceof 2 records,using the followingvalue(s):
See“Structure ofRFHead values”(p. 3-128).
Default is an emptysequence.
rFPowerLevel
(Maximum transmit power)
no (RO) This read only attributestores the maximum transmitpower supported by this RFHead.
0.0 through 50.0 stepsize=0.1
Default = 0.0
rxDiversityEnabled no (RO) Controls whether this radioshall use itsreceive-diversity capability.
enabled
(Receive diversity enabled) disabled
Default: enabled
rxMode no (RO) This parameter indicateshow the RF Head Rxantenna connections areconfigured.
duplex
(Receive antenna mode) simplex
replicate
Default: duplex
NodeB object descriptions RFHead
...................................................................................................................................................................................................................................
3-126 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
rxVSWRPeriodicity
(Receive RF VSWR)
no (RW) This parameter indicates theperiodicity of the receive RFVSWR antenna testingperformed on the RF Head.A value of 0 will disablereceived RF VSWR antennatesting on the RF Head.
0 through 1440 stepsize=1
Default = 2
rxVSWRThresholdAntenna1
(Receive VSWR RF antenna1)
no (RW) This parameter provides thethreshold for the receiveVSWR RF antenna test thatthe RF Head will use. If thisthreshold is violated analarm will be sent indicatingthat there is a potentialproblem on the receive pathin the RF Head associatedwith antenna 1.
0.5 through 20.0 stepsize=0.1
Default = 10.0
rxVSWRThresholdAntenna2
(Receive VSWR thresholdantenna 2)
no (RW) This parameter provides thethreshold for the receiveVSWR RF antenna test thatthe RF Head will use. If thisthreshold is violated analarm will be sent indicatingthat there is a potentialproblem on the receive pathin the RF Head associatedwith antenna 2.
0.5 through 20.0 stepsize=0.1
Default = 10.0
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
NodeB object descriptions RFHead
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-127
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
supportedRFPath
(supported Radio FrequencyPath)
no (RO) This read only attributeuniquely identifies the RFpath this RF Head is able tosupport.
See“Structure ofRFHead values”(p. 3-128).
Default is an emptysequence.
txPartialVSWRThreshold
(TX partial VSWRthreshold)
no (RW) This defines the currentthreshold used to generate aTx Partial VSWR Failurealarm if the measured valueis below this threshold.
0.0 through 20.0 stepsize=0.1
Default = 10.0
txVSWRThreshold
(VSWR alarm threshold)
no (RW) This read only attributedefines the current VSWRalarm threshold for theassociated RF head.
0.0 through 20.0 stepsize=0.1
Default = 5.0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
Structure of RFHead values
The following table describes the value format used for the RFHead object attribute.
NodeB object descriptions RFHead
...................................................................................................................................................................................................................................
3-128 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
externalAlarms portNumber 0 through 39 step size=1
specificProblem 0 through 100
severity warning
minor
major
critical
indeterminate
cleared
probableCause airCompressorFailure
airConditioningFailure
airDryerFailure
batteryDischarging
batteryFailure
commercialPowerFailure
coolingFanFailure
enclosureDoorOpen
engineFailure
explosiveGas
excessiveVibration
fire
fireDetectorFailure
flood
fuseFailure
generatorFailure
heatingOrVentilationOrCool-ingSystemProblem
humidityUnacceptable
highHumidity
highTemperature
highWind
iceBuildUp
NodeB object descriptions RFHead
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-129
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
intrusionDetection
lowBatteryThreshold
lowCablePressure
lowFuel
lowHumidity
lowTemperature
lowWater
leakDetection
materialSupplyExhausted
pressureUnacceptable
pumpFailure
rectifierFailure
rectifierHighVoltage
rectifierLowFVoltage
smoke
toxicGas
ventilationSystemFailure
temperatureUnacceptable
toxicLeakDetected
coolingSystemFailure
externalEquipmentFailure
externalPointFailure
additionalText 0 through 100
externalAlarms activeState open
close
portConnectivity portID 0 through 2147483647 step size=1
portType master
slave
connectedTo String of characters
supportedRFPath sectorID 0 through 3 step size=1
perSectorID 1 through 6 step size=1
supportedRFPath frequencyBand bAND_V
NodeB object descriptions RFHead
...................................................................................................................................................................................................................................
3-130 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
bAND_IX
bAND_II
bAND_I
bAND_VIII
bAND_IV
bAND_X
NodeB object descriptions RFHead
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-131
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
RxAmp...................................................................................................................................................................................................................................
Full name
Receiving amplifier
Description
This object represents the Low Noise Amplifier (LNA) in the duplexer component ofthe Node B. The LNA is responsible for amplifying received RF signals.
The RxAmp, together with its parent Filter, define the receive path. In case of receivediversity, two receive paths are needed per sector. When an RxAmp has to be replaced,the whole Filter has to be replaced.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an RxAmp object.
• The value of attributeslotNumber must be identical to the slot number of theparent Filter object.
• The value of attributeshelfNumber shall be derived from the parent shelf(FilterShelfshelfNumber).
The following list outlines the object constraints for deleting an RxAmp object.
• Make sure that no associated ExtRxAmp exists (the Distinguished Name (DN) ofthe RxAmp to be deleted must not be contained in any of ExtRxAmpassociatedRxAmp).
• Make sure that no associated Radio exists (RxAmpassociatedRadio must beempty).
Attributes
The following attributes apply to the RxAmp object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
NodeB object descriptions
...................................................................................................................................................................................................................................
3-132 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
associatedRadio
(Associated radio)
no (RO) The Distinguished Name(DN) of the radio that isassociated with this filter.
Sequenceof 0 through2 records, using thefollowing value(s):
String of characters
No default
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
NodeB object descriptions RxAmp
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-133
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
manRxAttenuation
(Manual Rx Attenuation)
no (RW) This attribute defines the Rxattenuation value ifNodeb.rPGAdjustmentModeis ″manual″.
0.0 through 12.0 stepsize=0.5
Default = 4.0
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
ownRxFilterPanelAttenuator
(Receive Filter PanelAttenuator)
no (RO) This stores the configuredvalues, set by the NodeBOAM application, to adjustthe required receive pathgain for one of the receivepaths of the related cell.
See“Structure ofRxAmp values”(p. 3-135).
Default = {j4,
highGain,
5.0}
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 3
NodeB object descriptions RxAmp
...................................................................................................................................................................................................................................
3-134 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
usedRPG
(Used Receive Path Gain)
no (RO) This stores the Receive PathGain which is used by thecell.
0.0 through 100.0 stepsize=0.1
Default = 0.0
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
Structure of RxAmp values
The following table describes the value format used for the RxAmp object attribute.
Attribute Sequence of structure Values
ownRxFilterPanelAt-tenuator
rxFPPortID j4
j5
j6
NodeB object descriptions RxAmp
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-135
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Sequence of structure Values
j24
j25
j26
gainMode highGain
lowGain
attenuation 0.0 through 20.0 step size=0.1
NodeB object descriptions RxAmp
...................................................................................................................................................................................................................................
3-136 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
STM1OC3Port...................................................................................................................................................................................................................................
Full name
STM1OC3Port
Description
This object models an STM-1/OC3 port terminated on the TIM card on a URC-II. Itprovides an STM-1/OC3 backhaul interface. There can be 1 STM-1 or OC3 port perURC-II.
Hierarchical location
Hierarchical location of the STM1OC3Port object:
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating an LNodeB object:
• There must be no instances of E1T1Port, IMAGroup or STM1OC3Port objects
• The URC object must exist, and the URC::expectedURCHardwareModel must beuRCII-E3T3
• If the attribute expectedURCHardwareMmodel of the parent URC object does notequal″uRCII-E3T3″ an E3T3Port MOI must not be created under this parent URC
• No references to this E3T3Port object must exist in VCL data in attributes ofIuBInterface objects.
Attributes
The following attributes apply to the STM1OC3Port object and are available throughthe GUI and CLI.
NodeB
IubInterface
DigitalShelf
URC
S M1OCT 3Port
NodeB object descriptions
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-137
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: unlocked
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bearerType no (RO) This read-only parameterindicates what type ofBearer is represented by thisSTM1OC3 port.
stm_1
(Bearer type) oc_3
stm_1j
undefined
Default: stm_1
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
NodeB object descriptions STM1OC3Port
...................................................................................................................................................................................................................................
3-138 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions STM1OC3Port
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-139
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
TDU...................................................................................................................................................................................................................................
Full name
Test and diagnostics unit
Description
This object represents the Test and Diagnostics Unit (TDU) component of the Node Bfilter shelf.
The TDU performs radio frequency tests on all the physical antennas (transmit andreceive antenna tests) and also performs predistortion measurements needed for gainingpower stability.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating a TDU object.
• At least one Common Timing Unit (CTU) object must exist.
• The value of attributeshelfNumber shall be derived from the parent shelf(FilterShelfshelfNumber).
• The value of attributeslotNumber shall be set according to the following mappingrules:
– For TDU with RDN = 1 thenslotNumber = 7
– For TDU with RDN = 2 thenslotNumber = 8.
Attributes
The following attributes apply to the TDU object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: locked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
NodeB object descriptions
...................................................................................................................................................................................................................................
3-140 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions TDU
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-141
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 3
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
NodeB object descriptions TDU
...................................................................................................................................................................................................................................
3-142 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
NodeB object descriptions TDU
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-143
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
TxAmp...................................................................................................................................................................................................................................
Full name
Transmit amplifier
Description
This object represents the Linear Amplifier Module (LAM) component of the Node B.The LAM amplifies the low-power level modulated radio frequency signals generatedby the radio to get high power level signals which are passed to the filter.
Each antenna requires an amplifier which may be constructed of one or two TxAmps,depending on the maximum needed output power.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating a TxAmp object.
• If nodeBType is “indoorFull”, “integrated”, “modcell”, or “futureType” the value ofthe RDN of the TxAmp must be 1, 2, 5, 6, 9 or 10.
• If nodeBType is “indoorHybrid” the value of the RDN of the TxAmp must be inthe range 1 to 3.
• If nodeBType is “compact” the value of the RDN of the TxAmp must be in therange 1 to 6.
• A supporting Universal Radio Controller (URC) object must exist.
• The TxAmp is fix assigned to a sector, dependent on the RDN and the value ofattributenodeBType.If nodeBType is “indoorFull”, “integrated”, “modcell”, or “futureType” these rulesapply:
– For TxAmp with RDN = 1 or RDN = 2 setsector to 1
– For TxAmp with RDN = 5 or RDN = 6 setsector to 2
– For TxAmp with RDN = 9 or RDN = 10 setsector to 3.If nodeBType is “compact” these rules apply:
– For TxAmp with RDN = 1 or RDN = 2 setsector to 1
– For TxAmp with RDN = 3 or RDN = 4 setsector to 2
– For TxAmp with RDN = 5 or RDN = 6 setsector to 3.If nodeBType is “indoorHybrid” these rules apply:
– For TxAmp with RDN = 1 setsector to 1
– For TxAmp with RDN = 2 setsector to 2
– For TxAmp with RDN = 3 setsector to 3.
NodeB object descriptions
...................................................................................................................................................................................................................................
3-144 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
• The value of attributeshelfNumber shall be derived from the parent shelf(AmplifierShelf shelfNumber).
• The value of attributeslotNumber shall be set to the value of the RDN of thecreated TxAmp.
The following list outlines the object constraints for deleting a TxAmp object.
• Make sure that no associated Radio object exists (controllingRadio must beempty).
Attributes
The following attributes apply to the TxAmp object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: locked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
associatedFilter
(Associated filter)
no (RO) This attribute stores theDistinguished Name (DN) ofthe filter that is associatedwith this TxAmp.
String of characters
No default
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
NodeB object descriptions TxAmp
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-145
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
controllingRadio
(Controlling radio)
no (RO) The Distinguished Name(DN) of the radio that isassociated with this TxAmpobject.
String of characters
No default
detectedPowerCapability
(Detected maximumamlpifier power)
no (RO) The maximum power (inWatts) that this transmitteramplifier can support.
0.0 through 100.0
Default = 0.0
detectedTxAmpHardware-Model
no (RO) The transmitter amplifierhardware type as it isreported by the NodeB.
unknownTxAmpHard-wareModel
(Detected transmitteramplifier)
iLAM_BAND_I
pkLAM_BAND_II
p1PAM_BAND_II
p2PAM_BAND_II
c2PAM_BAND_V
mCPA
rFoF
kdLAM_BAND_IX
iPAM_BAND_I
d1PAM_BAND_IX
g2PAM_BAND_VIII
i3PAM_BAND_I_IV_X
NodeB object descriptions TxAmp
...................................................................................................................................................................................................................................
3-146 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
Default:unknownTxAmpHard-wareModel
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
expectedTxAmpHardware-Model
yes (RO-SC) The transmitter amplifierhardware model the operatorexpects to be installed.
unknownTxAmpHard-wareModel
(Expected transmitteramplifier)
iLAM_BAND_I
pkLAM_BAND_II
p1PAM_BAND_II
p2PAM_BAND_II
c2PAM_BAND_V
mCPA
rFoF
kdLAM_BAND_IX
iPAM_BAND_I
d1PAM_BAND_IX
g2PAM_BAND_VIII
i3PAM_BAND_I_IV_X
Default:unknownTxAmpHard-wareModel
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions TxAmp
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-147
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
powerUtilisation
(Transmit amplifiermaximium power)
yes (RO-SC) The percentage of themaximium power that thisTxAmp can support, whichis assigned to this NodeB.
1.0 through 100.0
Default = 100.0
radioUnitNr
(Radio unit numberr)
yes (RO-SC) This attribute is used to findthe associated Radioinstance by mapping thevalue to the RDN of theRadio.
1 through 6 step size=1
No default
sector
(Sector)
no (RO) The number of the sectorthat is covered by this radio.
0 through 3 step size=1
Default = 0
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 2
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
NodeB object descriptions TxAmp
...................................................................................................................................................................................................................................
3-148 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
NodeB object descriptions TxAmp
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-149
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
UCU...................................................................................................................................................................................................................................
Full name
UMTS channel unit
Description
This object represents the UMTS Channel Unit (UCU) component in the Node Bdigital shelf.
The UCU performs baseband signal processing and connects in the uplink direction tothe Universal Radio Controller (URC) and in the downlink direction to the UMTSCDMA Radio (UCR). The UCR converts the received signals from the UCU tomodulated RF signals.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating a UCU object.
• If nodeBType is “indoorHybrid” or “compact”, the RDN of the UCU must be in therange 1 to 4.
• There must be at least one Common Timing Unit (CTU) object.
• The value of attributeshelfNumber shall be derived from the parent shelf(DigitalShelf shelfNumber).
• If nodeBType is “indoorFull”, “integrated”, “modcell”, or “futureType” the value ofthe attributeslotNumber shall be set according to the following mapping rules:
– For UCU with RDN = 1 thenslotNumber = 5
– For UCU with RDN = 2 thenslotNumber = 6
– For UCU with RDN = 3 thenslotNumber = 7
– For UCU with RDN = 4 thenslotNumber = 8
– For UCU with RDN = 5 thenslotNumber = 9
– For UCU with RDN = 6 thenslotNumber = 10
– For UCU with RDN = 7 thenslotNumber = 19
– For UCU with RDN = 8 thenslotNumber = 20
– For UCU with RDN = 9 thenslotNumber = 21
– For UCU with RDN = 10 thenslotNumber = 22
– For UCU with RDN = 11 thenslotNumber = 23
– For UCU with RDN = 12 thenslotNumber = 24.
• If nodeBType is “indoorHybrid” or “compact” the value of the attributeslotNumber shall be set to the value of the RDN of the created UCU + 3.
NodeB object descriptions
...................................................................................................................................................................................................................................
3-150 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attributes
The following attributes apply to the UCU object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: locked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
NodeB object descriptions UCU
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-151
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
detectedUCUHardware-Model
no (RO) This read only parameterindicates the installed UCUhardware type detected bythe NodeB.
unknownUCUHard-wareModel
(UCU hardware type) uCU_II
uCU_III_H
uCU_III_R
uCU_III_E
Default:unknownUCUHard-wareModel
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
NodeB object descriptions UCU
...................................................................................................................................................................................................................................
3-152 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
NodeB object descriptions UCU
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-153
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
URC...................................................................................................................................................................................................................................
Full name
Universal radio controller
Description
This object represents the Universal Radio Controller (URC) component in the Node Bdigital shelf.
The main functions of the URC card are hardware maintenance (including alarmprocessing), software configuration management (including image upgrades),performance measurement control, resource administration, traffic routing, and radiolink set-up.
Object constraints and supported actions
You can create, delete, and modify this object.
The following list outlines the object constraints for creating a URC object.
• If nodeBType = “indoorFull”, “integrated”, “modcell”, or “futureType” then at leastone instance of Common Power Converter (CPC) with Relative DistinguishedName (RDN) value 1 to 4 must exist, this ensures the existence of one instance ofCPC type A.
• If nodeBType = “indoorFull”, “integrated”, “modcell”, or “futureType” then at leastone instance of CPC with RDN value 5 to 8 must exist, this ensures the existenceof one instance of CPC type B.
• If nodeBType = “indoorHybrid” or “compact” then at least one instance of CPCwith RDN value 1 to 2 must exist, this ensures the existence of one instance ofCPC type A.
• If nodeBType = “indoorHybrid” or “compact” then at least one instance of CPCwith RDN value 3 to 4 must exist, this ensures the existence of one instance ofCPC type B.
• The value of attributeshelfNumber shall be derived from the parent shelf(DigitalShelf shelfNumber).
• If RDN = 1 then seturcType to “primary”, else seturcType to “auxiliary”.
The following list outlines the object constraints for deleting an URC object.
• Make sure that none of the following objects exist: IOU, CTU, OM, Filter, TxAmp,IubInterface.
NodeB object descriptions
...................................................................................................................................................................................................................................
3-154 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attributes
The following attributes apply to the URC object and are available through the GUIand CLI.
Attribute/Name Required Description Value
administrativeState no (RO) The administrative state ofthe managed object.
locked
(Administrative state) unlocked
shuttingDown
Default: locked
apparatusCode
(Apparatus code)
no (RO) Apparatus code of themaintenance-replaceableunit.
0 through 50
Default = N/A
artMaster
(Art master)
no (RO) Art master of themaintenance-replaceableunit.
0 through 50
Default = N/A
availabilityStatus no (RO) The availability status of amanaged object. This statuscomplements the operationalstate information and mustbe seen in combination.
inTest
(Availability status) failed
powerOff
offLine
offDuty
dependency
degraded
notInstalled
logFull
Default: offLine
bootSoftwareVersion
(Boot software version)
no (RO) The Boot Software Versionof the hardware unit.
0 through 100
Default = N/A
clei
(Common languageequipment identifier)
no (RO) The Common LanguageEquipment Identifier (CLEI)code of the hardware unit.
0 through 50
Default = N/A
NodeB object descriptions URC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-155
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
detectedURCHardwareModelno (RO) The URC hardware modelthat is physically present inthe NodeB.
unknownURCHard-wareModel
(URC hardware model) uRC
uRCi
uRCII_E1T1
uRCII_STM1
uRCII_E3T3
Default:unknownURCHard-wareModel
eci
(Equipment catalog item)
no (RO) The Equipment Catalog Itemof the hardware unit.
0 through 50
Default = N/A
expectedURCHardware-Model
yes(RW-LO)
The URC hardware modelthe operator expects to beinstalled.
unknownURCHard-wareModel
(URC hardware model) uRC
uRCi
uRCII_E1T1
uRCII_STM1
uRCII_E3T3
Default:unknownURCHard-wareModel
firmwareVersion
(Firmware version)
no (RO) The firmware version of thehardware unit.
0 through 100
Default = N/A
inventoryUnitId
(Inventory unit identifier)
no (RO) The ASCII representation ofthe value of the RDNattribute which uniquelyidentifies the object instancewithin the scope of itscontaining (parent) objectinstance.
Any valid string.
The maximum lengthis 52 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions URC
...................................................................................................................................................................................................................................
3-156 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
inventoryUnitType
(Inventory unit type)
no (RO) Type of inventory unit(Hardware, Firmware).
0 through 52
Default = Hardware
miscellaneous
(Miscellaneous)
no (RO) This attribute allows theoperator to specifymiscellaneous informationabout the hardware unit.
0 through 50
Default = N/A
operationalState no (RO) The operational state of themanaged object.
enabled
(Operational state) disabled
Default: disabled
serialNumber
(Serial number)
no (RO) The serial number of thehardware unit.
0 through 50
Default = N/A
series
(Series)
no (RO) The subversion identifier ofthe hardware unit.
0 through 50
Default = N/A
shelfNumber
(Shelf number)
no (RO) The number of the shelf inwhich the hardwarecomponent is installed.
1 through 6 step size=1
Default = 1
slotNumber
(Slot number)
no (RO) The number of the slot inwhich the hardware unit islocated.
0 through 48 stepsize=1
Default = 0
tIMComcode
(TIM card comcode)
no (RO) Shows comcode inventoryinformation for the TIMcard which may be equippedon a URC-II.
Any valid string.
The maximum lengthis 50 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
NodeB object descriptions URC
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
3-157
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute/Name Required Description Value
tIMSerialNumber no (RO) Shows serial numberinventory information forthe TIM card that may beequipped on a URC-II.
Any valid string.
The maximum lengthis 50 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
unitNumber
(Unit number)
no (RO) The number of the hardwareunit.
0 through 65535 stepsize=1
Default = 0
urcType no (RO) This attributes displays thetype of the Universal RadioController (URC).
primary
(Universal radio controllertype)
auxiliary
Default: primary
userLabel
(User label)
no (RW) Operator-defined text stringthat is used as an easilyrecognizable name for thisobject.
Any valid string.
The maximum lengthis 100 alphanumericcharacters, includinghyphens andunderscores.
Default is an emptystring.
vendorName
(Vendor name)
no (RO) The name of the vendor ofthe Managed Element.
0 through 52
Default = LucentTechnologies
vendorUnitFamilyType
(Vendors unit family type)
no (RO) Function Code, for example;UCU, UCR
0 through 50
Default = N/A
vendorUnitTypeNumber
(Vendors unit type number)
no (RO) Comcode Number 0 through 50
Default = N/A
NodeB object descriptions URC
...................................................................................................................................................................................................................................
3-158 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Appendix A: Common attributes
Overview...................................................................................................................................................................................................................................
Purpose
These tables detail the attributes that are common between objects of the NodeB, RNC,and OMCU Management Information Models (information models).
When these attributes are updated, the same changes must be applied to the equivalentattribute of the appropriate object.
Contents
SNM objects with common attributes A-2
RNC objects with common attributes A-4
NodeB objects with common attributes A-6
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
A-1
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SNM objects with common attributes...................................................................................................................................................................................................................................
ExternalGsmCell
The following table shows how attributes of this object are mapped to attributes ofother objects.
Attribute Mapping information
Informationmodel
Object Attribute
userLabel RNC GsmExtCell userLabel
ExternalUtranCell
The following table shows how attributes for this object are mapped to attributes ofother objects.
Attribute Mapping information
Informationmodel
Object Attribute
userLabel RNC FddExtCell userLabel
IubLink
The following table shows how attributes for this object are mapped to attributes ofother objects.
Attribute Mapping information
Informationmodel
Object Attribute
userLabel NodeB IubInterface userLabel
IucsLink
The following table shows how attributes for this object are mapped to attributes ofother objects.
Common attributes
...................................................................................................................................................................................................................................
A-2 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Mapping information
Informationmodel
Object Attribute
userLabel RNC IuCS userLabel
IupsLink
The following table shows how attributes for this object are mapped to attributes ofother objects.
Attribute Mapping information
Informationmodel
Object Attribute
userLabel RNC IuPS userLabel
IurLink
The following table shows how attributes for this object are mapped to attributes ofother objects.
Attribute Mapping information
Informationmodel
Object Attribute
userLabel RNC IuR userLabel
VccQos
The following table shows how attributes for this object are mapped to attributes ofother objects.
Attribute Mapping information
Informationmodel
Object Attribute
userLabel NodeB QoS userLabel
Common attributes SNM objects with common attributes
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
A-3
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
RNC objects with common attributes...................................................................................................................................................................................................................................
ATMQOS
The following table shows how attributes of this object are mapped to attributes ofother objects.
Attribute Mapping information
Informationmodel
Object Attribute
userLabel SNM VccQos userLabel
FddExtCell
The following table shows how attributes for this object are mapped to attributes ofother objects.
Attribute Mapping information
Informationmodel
Object Attribute
userLabel SNM ExternalUtranCell userLabel
GsmExtCell
The following table shows how attributes for this object are mapped to attributes ofother objects.
Attribute Mapping information
Informationmodel
Object Attribute
userLabel SNM ExternalGsmCell userLabel
IuB
The following table shows how attributes for this object are mapped to attributes ofother objects.
Common attributes
...................................................................................................................................................................................................................................
A-4 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Attribute Mapping information
Informationmodel
Object Attribute
userLabel SNM IubLink userLabel
IuCS
The following table shows how attributes for this object are mapped to attributes ofother objects.
Attribute Mapping information
Informationmodel
Object Attribute
userLabel SNM IucsLink userLabel
IuPS
The following table shows how attributes for this object are mapped to attributes ofother objects.
Attribute Mapping information
Informationmodel
Object Attribute
userLabel SNM IupsLink userLabel
IuR
The following table shows how attributes for this object are mapped to attributes ofother objects.
Attribute Mapping information
Informationmodel
Object Attribute
userLabel SNM IurLink userLabel
Common attributes RNC objects with common attributes
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
A-5
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
NodeB objects with common attributes...................................................................................................................................................................................................................................
IubInterface
The following table shows how attributes of this object are mapped to attributes ofother objects.
Attribute Mapping information
Informationmodel
Object Attribute
userLabel SNM IubLink userLabel
QoS
The following table shows how attributes for this object are mapped to attributes ofother objects.
Attribute Mapping information
Informationmodel
Object Attribute
userLabel SNM VccQos userLabel
Common attributes
...................................................................................................................................................................................................................................
A-6 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Glossary
....................................................................................................................................................................................................................................
Numerics
3GThird Generation
3GPPThird Generation Partnership Project
....................................................................................................................................................................................................................................
A A-InterfaceGSM interface between BSS and MSC
AALATM Adaptation Layer
ACAccess ClassAlternating Current
ACBAccess Class Barring
ACCHAssociated Control Channel
ACKAcknowledgement
AESAATM End System Address
AICHAcquisition Indicator Channel
....................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
GL-1
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ALCAPAccess Link Control Application Protocol
AMRAdaptive Multi Rate
ANAccess Network
ANSIAmerican National Standards Institute. The ANSI SS7 protocol is the standard SS7signaling protocol used in the North American GSM 1900 market.
APSAutomatic Protection Switching
ARFCNAbsolute Radio Frequency Channel Number
ASCAccess Service Class
ASCIIAmerican Standard Code for Information Interchange
ATMAsynchronous Transfer Mode
AuCAuthentication Center
....................................................................................................................................................................................................................................
B B-ISDNBroadband Integrated Services Digital Network
BCCBase station Color Code
BCCHBroadcast Control Channel
BCHBroadcast Channel
BERBit Error Rate
Glossary
...................................................................................................................................................................................................................................
GL-2 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
BLERBlock Error Rate
BSCBase Station Controller
BSICBase Station Identity Code
BSSBase Station System
BTSBase Transceiver Station
....................................................................................................................................................................................................................................
C CACCall Admission Control
CAMELCustomized Applications for Mobile networks Enhanced Logic
CAPCAMEL Application Part
CBCell Broadcast
CCCall Control
CCCHCommon Control Channel
CCHControl Channel
CCPCommunication Control Port
CCPCHCommon Control Physical Channel
CCSCommon Channel Signaling
Glossary
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
GL-3
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
CCSS7Common Channel Signaling System No. 7. The ANSI SS7 protocol is the standard SS7protocol used in the North American market and the ITU-T SS7 protocol is used in othermarkets.
CDMACode Division Multiple Access
CFNConnection Frame Number
CGICell Global IdentityCommon Gateway Interface
CICell Identity
CICCCommon Intelligent Carrier Card
CLEICommon Language Equipment Identifier
CLICommand Line Interface
CMConfiguration Management
CMIPCommon Management Information Protocol
CMISECommon Management Information Service Element
CNCore Network
ConCCongestion Control
CORBACommon Object Request Broker Architecture
CPCCommon Power Converter
Glossary
...................................................................................................................................................................................................................................
GL-4 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
CPCHCommon Packet Channel
CPICHCommon Pilot Channel
cPSBCompact Packet Switching Backplane
CRNCControlling Radio Network Controller
CSCircuit Switched
CTCHCommon Traffic Channel
CTUCommon Timing Unit
....................................................................................................................................................................................................................................
D DAHODatabase Assisted Handover
DBData Base
DBCDynamic Bearer Control
DCADynamic Channel Allocation
DCCHDedicated Control Channel
DCHDedicated Channel
DHCPDynamic Host Configuration Protocol
DLDownlink
Glossary
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
GL-5
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
DNDistinguished Name. A DN is used to uniquely identify a managed object with acollection of hierarchical structured names.
DPCDestination Point Code
DPCCHDedicated Physical Control Channel
DPCHDedicated Physical Channel
DPDCHDedicated Physical Data Channel
DRNCDrift Radio Network Controller
DRNSDrift Radio Network Subsystem
DRXDiscontinuous Reception
DS-CDMADirect Sequence Code Division Multiple Access
DTCHDedicated Traffic Channel
DTXDiscontinuous Transmission
....................................................................................................................................................................................................................................
E E1Basic rate for Digital Trunks in Europe (rate 2.048 Mbps)
Ec/NoSignal to Noise Ratio
EDGEEnhanced Data Rates for GSM Evolution
EIREquipment Identity Register
Glossary
...................................................................................................................................................................................................................................
GL-6 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
EIRPEquivalent Isotropic Radiated Power
EMSElement Management System
ESCEthernet Switch Card
ETSIEuropean Telecommunications Standards Institute
....................................................................................................................................................................................................................................
F FACHForward Access Channel
FAUSCHFast Uplink Signaling Channel
FBPFlexent® Blade Platform
FCSFrame Check Sequence
FDDFrequency Division Duplex
FDMAFrequency Division Multiple Access
FECForward Error Correction
FERFrame Error Rate
FMFault management
FMSFlexent® Mobility Server
FMSFault management system
FNFrame Number
Glossary
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
GL-7
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
FPFrame Protocol
FRUField Replaceable Unit
FSFault Synchronization
FTAMFile Transfer Access and Management
FTPFile Transfer Protocol
FWRFlexent® Wireless Router
....................................................................................................................................................................................................................................
G GGSNGateway GPRS Support Node
GICCGateway Intelligent Carrier Card
GMSCGateway Mobile Switching Center
GMSKGaussian Minimum Shift Keying
GPRSGeneral Packet Radio System
GPSGlobal Positioning System
GSMGlobal System for Mobile Communications
GSNGPRS Support Node
GTPGPRS Tunneling Protocol
GUIGraphical User Interface
Glossary
...................................................................................................................................................................................................................................
GL-8 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
....................................................................................................................................................................................................................................
H HCSHierarchical Cell Structure
HLRHome Location Register
HOHandover
HSCSDHigh Speed Circuit Switched Data
HVACHeating, Ventilation, & Air Conditioning
....................................................................................................................................................................................................................................
I IDInventory Data
IFMIntegrated Fault Management
IMEIInternational Mobile Equipment Identity
IMSIInternational Mobile Subscriber Identity
IMT-2000International Mobile Telecommunications 2000
INIntelligent Network
INAPIntelligent Network Application Part
IOUInput/Output Unit
IPInternet Protocol
IPOAInternet Protocol over ATM
Glossary
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
GL-9
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ISDNIntegrated Services Digital Network
ISOInternational Organization for Standardization
ISUPISDN User Part
ITUInternational Telecommunication Union
ITU-TInternational Telecommunication Union — Telecommunication standardization sector.The international telephone and telegraph consultative committee that develops globalstandards for communications (formerly known as CCITT).
IuInterface between the core network and the UTRAN
Iu-CSInterface between an RNC and the Circuit Switched network
Iu-PSInterface between an RNC and the Packet Switched network
IubInterface between an RNC and a Node B
IurLogical interface between two RNCs
IWUInter Working Unit
....................................................................................................................................................................................................................................
K kbpskilobits per second
....................................................................................................................................................................................................................................
L L1Layer 1 (physical layer)
L2Layer 2 (data link layer)
L3Layer 3 (network layer)
Glossary
...................................................................................................................................................................................................................................
GL-10 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
LALocation Area
LACLocation Area Code
LAILocation Area Identity
LANLocal Area Network
LAPDLink Access Procedure for the ISDN D-channel. An X.25 point-to-point link layerprotocol.
LAPDmLink Access Procedure for the ISDN D-channel (mobile)
LCSLocation Services
LLCLogical Link Control
LMTLocal Maintenance Terminal
LRNLocal Reference Number
LRNCLocal Radio Network Controller
LSALocalized Service Area
LTELine Transmission Equipment
LVMLogical Volume Management
....................................................................................................................................................................................................................................
M MACMedium Access Control
Glossary
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
GL-11
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
MAHOMobile Assisted Handover
MAPMobile Application Part
MbpsMegabits per second
MCCMobile Country Code
MCCMMobile Communication Configuration Management
MEMobile Equipment
MHzMegahertz
MIBManagement Information Base
MISManagement Information Server
MITManagement Information Tree
MMLMan-Machine Language
MNCMobile Network Code
MOManaged Object
MSMobile Station
MSCMobile services Switching Center
MSIDMobile Station Identifier
Glossary
...................................................................................................................................................................................................................................
GL-12 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
MSINMobile Station Identification Number
MSISDNMobile Subscriber International Standards Digital Network
MTBFMean Time Between Failures
MTPMessage Transfer Part
....................................................................................................................................................................................................................................
N NBAPNode B Application Part
NCCNetwork Color Code
NDCNational Destination Code
NENetwork Element
NEMNetwork Element Manager
NFMNetwork Fault Management system
NLSANeighboring List Selection Algorithm
NMCNetwork Maintenance Center
NMLNetwork Management Layer
NPNetwork Processor
NSAPNetwork Service Access Point
Glossary
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
GL-13
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
....................................................................................................................................................................................................................................
O O&MOperations and Maintenance
OAMOperations, Administration and Maintenance
OCNSOrthogonal Channel Noise Simulator
OMOscillator Module
OMCOperations and Maintenance Center
OMC-UOperations and Maintenance Center - UTRAN
OPCOriginating Point Code
OSOperations System
OSIOpen Systems Interconnection
....................................................................................................................................................................................................................................
P PADPacket Assembler/Disassembler
PCCHPaging Control Channel
PCCPCHPrimary Common Control Physical Channel
PCGPacket Charging Gateway
PCHPaging Channel
PCPCHPhysical Common Packet Channel
Glossary
...................................................................................................................................................................................................................................
GL-14 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
PCPCHPhysical Common Packet Channel
PDCPPacket Data Convergence Protocol
PDNPacket Data Network
PICHPaging Indication Channel
PIDPacket Identification
PLMNPublic Land Mobile Network
PMPerformance Management
PPPPoint-to-point protocol
PRACHPhysical Random Access Channel
PRNCPeer Radio Network Controller
PSPacket switched
PSPacket Switched
PSPDNPacket Switched Public Data Network
PSTNPublic Switched Telephone Network
PTMPoint to Multipoint
PTPPoint to Point
Glossary
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
GL-15
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
PVCPermanent Virtual Circuit
....................................................................................................................................................................................................................................
Q QoSQuality of Service
QPSKQuadrature (Quaternary) Phase Shift Keying
....................................................................................................................................................................................................................................
R RARouting Area
RABRadio Access Bearer
RACRouting Area Code
RACCRouting Area Color Code
RACHRandom Access Channel
RAIRouting Area Identity
RANRadio Access Network
RANAPRadio Access Network Application Part
RATRadio Access Technology
RDNRelative Distinguished Name
RFRadio Frequency
RLCRadio Link Control
Glossary
...................................................................................................................................................................................................................................
GL-16 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
RLCPRadio Link Control Protocol
RNCRadio Network Controller
RNSRadio Network Subsystem
RNSAPRadio Network Subsystem Application Part
RNTIRadio Network Temporary Identifier
RRARadio Resource Allocation
RRCRadio Resource Control
RRMRadio Resource Management
RSCPReceived Signal Code Power
RSSIReceived Signal Strength Indicator
RXReceive
....................................................................................................................................................................................................................................
S SACCHSlow Associated Control Channel
SACSService Area Circuit Switch
SAPService Access Point
SAPSService Area Packet Switch
SCCHSynchronization Control Channel
Glossary
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
GL-17
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SCCPSignaling Connection Control Part
SCHSynchronization Channel
SDCCHStandalone Dedicated Control Channel
SFNSystem Frame Number
SGSNServing GPRS Support Node
SIBSystem Information Block
SIMSubscriber Identity Module
SLTMSignaling Link Test Message
SMSShort Message Service
SMS-CBSMS Cell Broadcast
SNMSub-Network Management
SNMPSimple Network Management Protocol
SRNCServing Radio Network Controller
SRNSServing Radio Network Subsystem
SRSSatellite Reference Service
SS7Signaling System No.7
Glossary
...................................................................................................................................................................................................................................
GL-18 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
SSCOPService Specific Connection Oriented Protocol
STCSignaling Transport Converter
....................................................................................................................................................................................................................................
T T1Basic rate for digital trunks in North America (rate 1.544 Mbps)
TCAPTransaction Capabilities Application Part
TCHTraffic Channel
TCPTransmission Control Protocol
TCP/IPTransmission Control Protocol / Internet Protocol
TDDTime Division Duplex
TDMATime Division Multiple Access
TDUTest and Diagnostics Unit
TFTransport Format
TFCTransport Format Combination
TFCITransport Format Combination Indicator
TFCSTransport Format Combination Set
TMNTelecommunications Management Network
TMSITemporary Mobile Subscriber Identity
Glossary
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
GL-19
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
TPUTraffic Processing Unit
TSSITransmitted Signal Strength Indicator
TSTDTime Switched Transmit Diversity
TXTransmit
....................................................................................................................................................................................................................................
U U-RNTIUTRAN Radio Network Temporary Identity
UARFCNUTRA Absolute Radio Frequency Channel Number
UARFNUTRA Absolute Radio Frequency Number
UCUUMTS Channel Unit
UDPUser Datagram Protocol
UEUser Equipment
UMTSUniversal Mobile Telecommunications System
UNIUser Network Interface
URAUTRAN Registration Area
URCUniversal Radio Controller
USIMUniversal Subscriber Identity Module
UTRAUniversal Terrestrial Radio Access
Glossary
...................................................................................................................................................................................................................................
GL-20 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
UTRANUniversal Terrestrial Radio Access Network
UuRadio interface between the UTRAN and the User Equipment
....................................................................................................................................................................................................................................
V VBRVariable Bit Rate
VCVirtual CircuitVirtual Channel
VCCVirtual Channel Connection
VCIVirtual Channel Identifier
VCLVirtual Channel Link
VHEVirtual Home Environment
VLRVisitor Location Register
VoIPVoice over IP
VPVirtual Path
VPIVirtual Path Identifier
VPNVirtual Private Network
....................................................................................................................................................................................................................................
W WAGWireless Access Gateway
WANWide Area Network
Glossary
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
GL-21
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
WAPWireless Application Protocol
WCDMAWideband Code Division Multiple Access
WDPWireless Datagram Protocol
WorkstationA desktop computer with a graphics monitor running the UNIX operating system
....................................................................................................................................................................................................................................
X X.25A CCITT (ITU-T) protocol specification covering OSI layers 1, 2, and 3.
Glossary
...................................................................................................................................................................................................................................
GL-22 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
Index
A AC, 2-7
AlarmHub, 3-5
AlarmHub (AlarmHub)
structure values,3-8
ALDController, 3-11
AmplifierShelf, 3-15
AmplifierShelf (Amplifiershelf)
constraints,3-15
supported actions,3-15
AmpShelfFan,3-16
AmpShelfFan (Amplifier shelffan)
constraints,3-16
supported actions,3-16
ATMQOS, 2-14
common attributes,A-4
ATMQOS (Asynchronoustransfer mode quality ofservice )
structure values,2-22
ATMQOS (Asynchronoustransfer mode quality ofservice)
constraints,2-14
supported actions,2-14
.............................................................
C Cabinet,2-25
constraints,2-25
supported actions,2-25
Cell, 3-18
constraints,3-18
supported actions,3-18
Cell (Cell)
structure values,3-21
CellSP,2-27
CICC, 2-30
CICCBPEtherPort,2-34
CICCProc,2-37
CPC, 3-22
CPC (Common powerconverter)
constraints,3-22
supported actions,3-22
CPRIPort,3-26
CPRIPort (CPRIPort)
structure values,3-29
CTU, 3-30
CTU (Common timing unit)
constraints,3-30
supported actions,3-30
.............................................................
D DigitalShelf, 3-35
DigitalShelf (Digital shelf)
constraints,3-35
supported actions,3-35
DigitalShelfFan,3-38
DigitalShelfFan (Digital shelffan)
constraints,3-38
supported actions,3-38
.............................................................
E E1T1Port,3-40
E1T1Port (E1/T1 port )
structure values,3-41
E1T1Port (E1/T1 port)
constraints,3-40
supported actions,3-40
E3T3Port,3-43
EDCH, 2-43
ESC, 2-46
ESCBPEtherPort,2-53
ESCFAEtherPort,2-56
ESCProc,2-59
EthernetPort,3-46
ExtAlmBox, 2-62
....................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
IN-1
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
ExtAlmBox (External alarmbox )
structure values,2-65
ExtAlmBox (External alarmbox)
constraints,2-62
supported actions,2-62
ExternalGsmCell,1-5
common attributes,A-2
ExternalGsmCell (ExternalGSM cell)
constraints,1-5
supported actions,1-5
ExternalRnc,1-9
ExternalRnc (External radionetwork controller)
constraints,1-9
supported actions,1-9
Externals,1-12
supported actions,1-12
ExternalUtranCell,1-13
ExternalUtranCell (ExternalUTRAN cell )
common attributes,A-2
structure values,1-19
ExternalUtranCell (ExternalUTRAN cell)
constraints,1-13
supported actions,1-13
ExtRxAmp, 3-48
ExtRxAmp (External receivingamplifier)
constraints,3-48
supported actions,3-48
.............................................................
F FanTray,2-67
FBPShelf,2-71
FddExtCell,2-75
FddExtCell (Frequency divisionduplex external cell )
common attributes,A-4
structure values,2-82
FddExtCell (Frequency divisionduplex external cell)
constraints,2-75
supported actions,2-75
Filter, 3-52
constraints,3-52
supported actions,3-52
FilterShelf, 3-59
FilterShelf (Filter shelf)
constraints,3-59
supported actions,3-59
Frame,3-60
constraints,3-60
supported actions,3-60
.............................................................
G GICC, 2-87
GICCBPEtherPort,2-91
GICCFAEtherPort,2-94
GICCPair,2-97
GICCPair (Gateway intelligentcarrier card pair)
constraints,2-97
supported actions,2-97
GICCProc,2-100
GICCSTM1OC3Port,2-106
GRS, 3-61
GRS (GPS reference server )
structure values,3-63
GsmExtCell,2-109
GsmExtCell (GSM external cell)
common attributes,A-4
GsmExtCell (GSM externalcell)
constraints,2-109
supported actions,2-109
.............................................................
H HSDPA, 2-114
HSDPA (High speed downlinkpacket access )
structure values,2-118
.............................................................
I IMAGroup, 3-65
constraints,3-65
IntraFreqMeas,2-120
IntraFreqMeas (Intra-frequencymeasurement )
structure values,2-124
IntraFreqMeas (Intra-frequencymeasurement)
constraints,2-120
supported actions,2-120
Inverse multiplexing of ATMgroup
constraints,3-65
IOU, 3-68
IOU (Input/output unit )
structure values,3-71
IOU (Input/output unit)
constraints,3-68
supported actions,3-68
IPQOS,2-128
Index
...................................................................................................................................................................................................................................
IN-2 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
IPQOS (IP Quality of Service )
structure values,2-130
ItfBGroup, 1-25
ItfBLink, 1-26
ItfBLink (Itf-B link )
structure values,1-28
ItfRLink, 1-30
ItfRLink (Itf-R link )
structure values,1-32
ItfRLink (Itf-R link)
constraints,1-30
supported actions,1-30
IuB, 2-132
IuB (Interface to Node B )
common attributes,A-4
structure values,2-136
IuB (Interface to Node B)
constraints,2-132
supported actions,2-132
IubInterface,3-74
common attributes,A-6
IubInterface (Interface to NodeB )
structure values,3-78
IubInterface (Interface to NodeB)
constraints,3-74
supported actions,3-74
IubLink, 1-33
IubLink (Iub link )
common attributes,A-2
structure values,1-36
IubLink (Iub link)
constraints,1-33
supported actions,1-33
IuCS, 2-138
IuCS (Interface to the circuitswitched core network )
common attributes,A-5
structure values,2-144
IuCS (Interface to the circuitswitched core network)
constraints,2-138
supported actions,2-138
IucsLink, 1-38
IucsLink (Iu-cs Link )
common attributes,A-2
structure values,1-41
IucsLink (Iu-cs link)
constraints,1-38
supported actions,1-38
IuPS, 2-146
IuPS (Interface to the packetswitched core network )
common attributes,A-5
structure values,2-151
IuPS (Interface to the packetswitched core network)
constraints,2-146
supported actions,2-146
IupsLink, 1-43
IupsLink (Iu-ps link )
common attributes,A-3
structure values,1-45
IupsLink (Iu-ps link)
constraints,1-43
supported actions,1-43
IuPSSubNet,2-153
IuPSSubNet (Interface to thepacket switched core networksubnet )
structure values,2-155
IuR, 2-157
IuR (Interface between RNCs )
common attributes,A-5
structure values,2-163
IuR (Interface between RNCs)
constraints,2-157
supported actions,2-157
IurLink, 1-47
IurLink (Iur link )
common attributes,A-3
structure values,1-50
IurLink (Iur link)
constraints,1-47
supported actions,1-47
.............................................................
L LA, 2-165
LA (Location area)
constraints,2-165
supported actions,2-165
LCell, 2-168
LCell (Logical cell )
structure values,2-208
LCell (Logical cell)
constraints,2-168
supported actions,2-168
LinkProfile, 1-52
LinkProfile (Link profile)
constraints,1-52
supported actions,1-52
LNodeB, 2-225
Index
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
IN-3
LNodeB (Logical Node B )
structure values,2-229
LNodeB (Logical Node B)
constraints,2-225
supported actions,2-225
LRNC, 2-231
LRNC (Local radio networkcontroller )
structure values,2-283
LRNC (Local radio networkcontroller)
constraints,2-231
supported actions,2-231
.............................................................
M Msc, 1-54
Msc (Mobile services switchingcenter)
constraints,1-54
supported actions,1-54
.............................................................
N NodeB, 3-80
common attributes,A-6
NodeB (Node B )
structure values,3-95
NodeB (Node B)
constraints,3-80
supported actions,3-80
NodeBFunction,1-56
NodeBFunction (Node Bfunction )
structure values,1-58
NodeBFunction (Node Bfunction)
constraints,1-56
supported actions,1-56
NodeBManagedElement,1-60
NodeBManagedElement (NodeB managed element)
constraints,1-60
supported actions,1-60
.............................................................
O OCM, 3-99
OCNS, 2-287
OCNS (Orthogonal channelnoise simulator)
constraints,2-287
supported actions,2-287
OCNSHSDPA,2-293
OM, 3-103
OM (Oscillator module)
constraints,3-103
supported actions,3-103
OMCU, 1-62
OMCU (Operations andmaintenance center UTRAN)
constraints,1-62
supported actions,1-62
.............................................................
P PassthroughVCLTP,3-107
PeriodCriteria,2-297
PeriodCriteria (Period criteria)
constraints,2-297
supported actions,2-297
PG, 2-301
PG (Protection group)
constraints,2-301
supported actions,2-301
PRACH, 2-304
PRACH (Physical randomaccess channel )
structure values,2-308
PRACH (Physical randomaccess channel)
constraints,2-304
supported actions,2-304
PRNC, 2-310
PRNC (Peer radio networkcontroller)
constraints,2-310
supported actions,2-310
PSU, 2-314
PSU (Power supply unit)
constraints,2-314
supported actions,2-314
.............................................................
Q QoS, 3-110
QoS (Quality of service )
common attributes,A-6
QoS (Quality of Service)
constraints,3-110
supported actions,3-110
.............................................................
R RA, 2-318
RA (Routing area)
constraints,2-318
supported actions,2-318
Radio, 3-113
constraints,3-113
supported actions,3-113
Radio (Radio)
structure values,3-118
RETActuator,3-119
Index
...................................................................................................................................................................................................................................
IN-4 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY
RF trace,2-321
RFHead,3-123
RFHead (RFHead)
structure values,3-128
RFTrace,2-321
RFTrace (Radio frequencytrace)
constraints,2-321
supported actions,2-321
RNC
common attributes,A-4
RncFunction,1-66
RncFunction (RNC function )
structure values,1-67
RncFunction (RNC function)
constraints,1-66
supported actions,1-66
RncManagedElement,1-69
RncManagedElement (RNCmanaged element)
constraints,1-69
supported actions,1-69
Rns, 1-71
Rns (Radio network subsystem)
constraints,1-71
supported actions,1-71
RxAmp, 3-132
RxAmp (Receiving amplifier )
structure values,3-135
RxAmp (Receiving amplifier)
constraints,3-132
supported actions,3-132
.............................................................
S SACS, 2-326
SACS (Service area circuitswitch)
constraints,2-326
supported actions,2-326
SAPS,2-329
SAPS (Service area packetswitch)
constraints,2-329
supported actions,2-329
SB, 2-332
SBBPEtherPort,2-340
SBClan,2-343
SBProc,2-346
SCCPCHFach,2-349
SCCPCHFach (Secondarycommon control physicalchannel forward accesschannel )
structure values,2-353
SCCPCHPch,2-355
SCCPCHPch (Secondarycommon control physicalchannel paging channel )
structure values,2-358
Sgsn,1-73
Sgsn (Serving GPRS supportnode)
constraints,1-73
supported actions,1-73
SMLC, 2-361
SMLC (Serving mobile locationcenter )
structure values,2-363
SNM
common attributes,A-2
SpareMOC,2-365
SS7Link, 2-367
SS7Link (Signaling system no.7link )
structure values,2-369
SS7Link (Signaling system no.7link)
constraints,2-367
supported actions,2-367
SS7LinkSet,2-371
SS7LinkSet (Signaling systemno.7 link set)
constraints,2-371
supported actions,2-371
SS7Stack,2-375
SS7Stack (Signaling systemno.7 protocol stack)
constraints,2-375
supported actions,2-375
SS7StackInst,2-386
STM1OC3Port,3-137
SuMgr, 2-389
.............................................................
T TDU, 3-140
TDU (Test and diagnosticsunit)
constraints,3-140
supported actions,3-140
TxAmp, 3-144
TxAmp (Transmit amplifier)
constraints,3-144
supported actions,3-144
.............................................................
U UCU, 3-150
UCU (UMTS channel unit)
constraints,3-150
supported actions,3-150
Index
...................................................................................................................................................................................................................................401-380-071R5.1Issue 0.2, May 2008
Alcatel-Lucent - ProprietarySee notice on first page
IN-5
Uni, 1-75
Uni (User network interface )
structure values,1-81
Uni (User network interface)
constraints,1-75
supported actions,1-75
UNIStack, 2-393
URA, 2-398
URA (UTRAN registrationarea)
constraints,2-398
supported actions,2-398
URC, 3-154
URC (Universal radiocontroller)
constraints,3-154
supported actions,3-154
.............................................................
V VccDetail, 1-83
VccDetail (Virtual channelconnection detail )
structure values,1-85
VccDetail (Virtual channelconnection detail)
constraints,1-83
supported actions,1-83
VccQos,1-87
VccQos (Virtual channelconnection quality of service )
common attributes,A-3
structure values,1-94
VccQos (Virtual channelconnection quality of service)
constraints,1-87
supported actions,1-87
Index
...................................................................................................................................................................................................................................
IN-6 Alcatel-Lucent - ProprietarySee notice on first page
401-380-071R5.1Issue 0.2, May 2008
PR
EL
IMIN
AR
YP
RE
LIM
INA
RY